Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > SDS PERCUSSION BIT SETS
Sort By:
1
BIT DRILL MASONRY 3/16X4IN    BIT DRILL MASONRY 1/8X2-1/2IN BIT DRILL MASONRY 1/4X4IN
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.
Irwin 61108 Economy Light Duty Rotary Masonry Drill Bit BIT MASONRY PERCUSSION 1/8X3IN Irwin 61112 Economy Light Duty Rotary Masonry Drill Bit
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
Irwin 5026000 Rotary Percussion Masonry Drill Bit Irwin 5026001 Rotary Percussion Masonry Drill Bit Irwin 61116 Economy Light Duty Rotary Masonry Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
BIT MASONRY 5/32X4.5IN        Irwin 5026002 Rotary Percussion Masonry Drill Bit Western States 80240 Masonry Drill Bit
BIT MASONRY 5/32X4.5IN
Our Price: $3.23
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile.
BIT MASONRY PERCSN 3/16X3/8IN BIT DRILL MASONRY 5/16X6IN    Western States 80241 Masonry Drill Bit
Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile.
Secure-Grip 48-20-8810 Hammer Drill Bit Irwin 5026003 Rotary Percussion Masonry Drill Bit Western States 80242 Masonry Drill Bit
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile.
BIT MASONRY PERCUSSION 1/4X4IN Dewalt DW5224 Percussion Masonry Drill Bit Dewalt DW5221 Percussion Masonry Drill Bit
Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 61120 Economy Light Duty Rotary Masonry Drill Bit BIT DRILL MASONRY 3/8X6IN     Western States 80244 Masonry Drill Bit
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile.
Secure-Grip 48-20-8811 Hammer Drill Bit Western States 80243 Masonry Drill Bit BIT MASONRY PERCUSSION 1/4X6IN
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
Western States 80245 Masonry Drill Bit Dewalt DW5222 Percussion Masonry Drill Bit Western States 80246 Masonry Drill Bit
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile.
Tapcon 11256 Masonry Drill Bit Dewalt DW5225 Percussion Masonry Drill Bit Bluegranite HCBG01 Hammer Drill Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Dewalt DW5223 Percussion Masonry Drill Bit Dewalt DW5227 Percussion Masonry Drill Bit Bluegranite HCBG03T/HCBG03 Hammer Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Bluegranite HCBG02 Hammer Drill Bit Bluegranite HCBG04 Hammer Drill Bit Bluegranite HCBG06 Hammer Drill Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
BIT MASONRY PRCUSSION 5/16X6IN Dewalt DW5228 Percussion Masonry Drill Bit Tapcon 11257 Masonry Drill Bit
Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.
Western States 80247 Masonry Drill Bit Irwin 5026006 Rotary Percussion Masonry Drill Bit Tapcon 11247 Masonry Drill Bit
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.
BIT DRILL MASONRY 1/2X6IN     Irwin 326000 Rotary Percussion Masonry Drill Bit Irwin 61124 Economy Light Duty Rotary Masonry Drill Bit
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
Tapcon 11363 Masonry Drill Bit Irwin 326002 Rotary Percussion Masonry Drill Bit Secure-Grip 48-20-8816 Hammer Drill Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Tapcon 11248 Masonry Drill Bit Irwin 326001 Rotary Percussion Masonry Drill Bit BIT MASONRY PERCUSSION 3/8X6IN
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
Irwin 326005 Rotary Percussion Masonry Drill Bit Tapcon 11362 Masonry Drill Bit Tapcon 1870565 1-Piece Impact Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Tapcon 1870567 1-Piece Impact Drill Bit Irwin 326008 Rotary Percussion Masonry Drill Bit Irwin 326003 Rotary Percussion Masonry Drill Bit
Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Bluegranite HCBG09 Hammer Drill Bit Irwin 1870541 1-Piece Impact Masonry Bit Irwin 1870542 1-Piece Impact Masonry Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Tapcon 1870566 1-Piece Impact Drill Bit Irwin 1870543 1-Piece Impact Masonry Bit Irwin 326006 Rotary Percussion Masonry Drill Bit
Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Irwin 1870544 1-Piece Impact Masonry Bit Irwin 1870545 1-Piece Impact Masonry Bit Irwin 1870546 1-Piece Impact Masonry Bit
Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Artu 1006 1-Piece Concrete Screw Drill Bit Secure-Grip 48-20-8821 Hammer Drill Bit Irwin 1870547 1-Piece Impact Masonry Bit
Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
BIT MASONRY IMPT RDY 1/4X4X6IN Irwin 5026009 Rotary Percussion Masonry Drill Bit Irwin 61128 Economy Light Duty Rotary Masonry Drill Bit
Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. 1/4" hex shank for use in impact drivers. 2 cutter heads. Impact ready. Percussion rated. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
BIT MASONRY PERCUSSION 1/2X6IN Artu 1014 1-Piece Concrete Screw Drill Bit Dewalt DW2572 Masonry Drill Bit
Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping.
Irwin 50128 Percussion Masonry Drill Bit Irwin 326009 Rotary Percussion Masonry Drill Bit Irwin 326011 Rotary Percussion Masonry Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Tapcon 1870568 1-Piece Impact Drill Bit Tapcon 1870569 1-Piece Impact Drill Bit Dewalt DW5230 Percussion Masonry Drill Bit
Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Secure-Grip 48-20-8800 Hammer Drill Bit Cobra 582U Masonry Drill Bit BIT MASONRY IMP RDY 5/32X4X6IN
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Used in applications such as drilling in brick, cinder block and tile. Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. For use in impact drivers. 2 cutter heads. Impact ready. Percussion rates. Carbide tipped cutting edge material. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction.
Bluegranite HCBG12 Hammer Drill Bit Secure-Grip 48-20-8801 Hammer Drill Bit Artu 1011 1-Piece Concrete Screw Drill Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards.
Secure-Grip 48-20-8805 Hammer Drill Bit Artu 1021 1-Piece Concrete Screw Drill Bit BIT DRILL MASONRY 5/8X6IN
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.
Secure-Grip 48-20-8806 Hammer Drill Bit Dewalt DW2573 Masonry Drill Bit Irwin 61132 Economy Light Duty Rotary Masonry Drill Bit
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
BIT MASONRY IMP RDY 3/16X4X6IN Artu 1023 1-Piece Concrete Screw Drill Bit Dewalt DW2574 Masonry Drill Bit
Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. 1/4" hex shank for use in impact drivers. 2 cutter heads. Impact ready. Percussion rates. Carbide tipped cutting edge material. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping.
Cobra 589U Masonry Drill Bit Irwin 5026015 Rotary Percussion Masonry Drill Bit Artu 1031 1-Piece Concrete Screw Drill Bit
Used in applications such as drilling in brick, cinder block and tile. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards.
Cobra 582Z Masonry Drill Bit Irwin 5026019 Rotary Percussion Masonry Drill Bit Dewalt DW5234 Percussion Masonry Drill Bit
Used in applications such as drilling in brick, cinder block and tile. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
BIT DRILL MASONRY 3/4X6IN     Artu 1041 1-Piece Concrete Screw Drill Bit Secure-Grip 48-20-8830 Hammer Drill Bit
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Bluegranite HCBG15 Hammer Drill Bit Dewalt DW5235 Percussion Masonry Drill Bit BIT MASONRY SET 5PC 1/8-3/8IN
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. High speed steel bits used in applications such as drilling in brick, cinder block and tile. Includes (1) each: 1/8", 3/16", 1/4", 5/16", 3/8" and space efficient case with pilfer proof tab.
Irwin 326015 Rotary Percussion Masonry Drill Bit Bluegranite HCBG16 Hammer Drill Bit Dewalt DW5241 Percussion Masonry Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Cobra 589Z Masonry Drill Bit Irwin 326019 Rotary Percussion Masonry Drill Bit Cobra 587Z Masonry Drill Bit
Used in applications such as drilling in brick, cinder block and tile. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Used in applications such as drilling in brick, cinder block and tile.
BIT HAMMER DRILL 5/8X4X6IN    BIT HAMMER DRILL 3/4X4X6IN    Bullet 16748 Masonry Drill Bit Set
The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Carbide tip penetrates surfaces faster while the flute removes material faster; used in applications such as drilling anchor holes when installing flag poles, mail boxes and running electrical conduit. Includes (1) one each: 3/16" x 4", 1/4"x4", 5/16"x4", 3/8"x4", 1/2"x4" and multi-purpose storage case.
Bluegranite HCBG20 Hammer Drill Bit Irwin 5026021 Rotary Percussion Masonry Drill Bit Tapcon 11249 Masonry Drill Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.
Tapcon 11250 Masonry Drill Bit Irwin 61170 Drill Bit Set Dewalt DW5244 Percussion Masonry Drill Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Carbide tipped bits used in masonry applications, 1/2" diameter. Includes: 3/16", 1/4", 5/16", 3/8", 1/2" and plastic case. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
DRILL BIT HAMMER 5/32X3X6IN   Cobra 584Z Masonry Drill Bit DRILL BIT HAMMER 3/16X4X6IN
Robust head for longer life. Various useable lengths. Milled u-flutes with deep cut-spiral for fast dust removal. Diamond ground carbide tip for precise starts to avoid scratching and skating in tile and hard stone. PowerGrip shank for aggressive gripping power. Shank diameter 0.1562; Diameter 5/32"; Flute length 3.0"; Overall length 6.0". Used in applications such as drilling in brick, cinder block and tile. Robust head provides longer life. Steel teeth that extend from the shank are designed to catch between the jaws of power tool chucks. Bit is easy to chuck in the tool and won't slip. Various useable lengths. Milled u-flutes with deep-cut spiral for fast dust removal. Diamond ground carbide tip for precise starts in tile and hard stone. PowerGrip shank for aggressive gripping power.
Irwin 326022 Rotary Percussion Masonry Drill Bit DRILL BIT HAMMER 1/4X4X6IN    Irwin 5026023 Rotary Percussion Masonry Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. PowerGrip shank for aggressive gripping power. Steel teeth extend from the shank to catch between the jaws of power tool chucks. Easy to chuck in the tool and won't slip. The tip of the BlueGranite turbo bit is Bosch carbide, diamond ground for precise starts to avoid scratching and skating in tile and hard stone. Robust head provides longer life. Various usable lengths. Milled u-flutes with deep-cut spiral for fast dust removal. Diamond ground carbide tip for precise starts in tile and hard stone. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Bluegranite HCBG22 Hammer Drill Bit Irwin 5026024 Drill Bit Set Bluegranite HCBG24 Hammer Drill Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. High speed steel drill bits used in masonry applications. Includes (1) one each: 3 /16", 1/4", 5 /16", 3/ 8", 1/2", and molded plastic case. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Irwin 326024 Rotary Percussion Masonry Drill Bit DRILL BIT SDS-PLUS SET 5PC    DRILL/CHISEL BITS SDS-PLUS 6PC
Bit is shot peened, double tempered finish reduces breakage and chrome vanadiam spring steel shaft. The round shank fits all hammer drills with 3 jaw chuck; 1/2 inch shank. Carbide tipped for long life in tough applications. Bit runs cooler thanks to improved flute design. Centric tip ensures quick starts in concrete. Wear mark alerts user when tip wears beyond ANSO specification. Optimized brazing and hardening process for long life. Bosch-made carbide tips are tougher and more durable under heavy loads. Set includes: (1) 3/16" x 4" x 6", (1) 1/4" x 2" x 4", (1) 1/4" x 4" x 6", (1) 3/8" x 4" x 6" and (1) 1/2" x 4" x 6". Also includes a reusable rugged case. Carbide tipped for long life in tough applications. Centric tip ensures quick starts in concrete. Optimized brazing and hardening process for long life. Wear mark alerts user when tip wears beyond ANSO specification. Bit runs cooler thanks to improved flute design. Brute Tough storage case for easy access, organizing and portability. The set includes: (1) 5/32" x 4" x 6", (1) 3/16" x 4" x 6", (1) 1/4" x 2" x 4", (1) 3/8" x 4" x 6", (1) flat chisel and (1) point chisel.
Irwin 326026 Rotary Percussion Masonry Drill Bit Bluegranite HCBG26 Hammer Drill Bit Milwaukee 48-20-7490 Drill Bit Set
Bit is shot peened, double tempered finish reduces breakage and chrome vanadiam spring steel shaft. The round shank fits all hammer drills with 3 jaw chuck; 1/2 inch shank. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Chisel shaped tip breaks concrete quickly for faster penetration. Four fluted spiral shaft has dust removal. Includes 3/16" x 4-1/2", 1/4" x 6", 5/16" x 6", 3/8" x 6", and 1/2" x 6".
Dewalt DW5470 Masonry Hammer Drill Bit Set Diamond Products 00005 Core Bit
Rock carbide tip for longer bit life and a 4 flute design that cleans debris out for fast, efficient drilling in concrete, masonry, artificial stone, and rock; fits into standard 3/8" and 1/2" chucks. Includes 3/16"x6-1/2", 1/4"x4", 1/4"x6", 3/8"x6", 1/2"x6" bits and case. Heavy duty bit has a high diamond concentration for excellent footage and drilling speed; used for all types of wet drilling in applications with light to moderate steel.
   
 
1