Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > PERCUSSION BITS
Sort By:
1
Irwin 61108 Economy Light Duty Rotary Masonry Drill Bit Irwin 61112 Economy Light Duty Rotary Masonry Drill Bit Irwin 5026000 Rotary Percussion Masonry Drill Bit
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
BIT DRILL MASONRY 1/4X6IN     Irwin 5026001 Rotary Percussion Masonry Drill Bit Irwin 61116 Economy Light Duty Rotary Masonry Drill Bit
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
Irwin 5026002 Rotary Percussion Masonry Drill Bit Western States 80240 Masonry Drill Bit S-B MC06 Multi-Construction Jobber Length Drill
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Steep flute with ribs for optimal dust removal, softened shank for aggressive griping power and customized carbide geometry optimized to handle a variety of material. Can be used in rotary and impact mode in concrete without bit change; drills into many grades of tiles, from granite to porcelain.
Western States 80241 Masonry Drill Bit Secure-Grip 48-20-8810 Hammer Drill Bit Irwin 5026003 Rotary Percussion Masonry Drill Bit
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Western States 80242 Masonry Drill Bit Dewalt DW5224 Percussion Masonry Drill Bit Dewalt DW5221 Percussion Masonry Drill Bit
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 61120 Economy Light Duty Rotary Masonry Drill Bit Western States 80244 Masonry Drill Bit Secure-Grip 48-20-8811 Hammer Drill Bit
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Western States 80243 Masonry Drill Bit Western States 80245 Masonry Drill Bit Dewalt DW5222 Percussion Masonry Drill Bit
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 4935105 Multi-Material Jobber Length Drill DRILL BIT BUL-MATRL 1/8 X 4.5 Tapcon 11256 Masonry Drill Bit
High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.
Dewalt DW5225 Percussion Masonry Drill Bit Irwin 4935106 Multi-Material Jobber Length Drill Bluegranite HCBG01 Hammer Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Dewalt DW5223 Percussion Masonry Drill Bit Dewalt DW5227 Percussion Masonry Drill Bit Bluegranite HCBG03T/HCBG03 Hammer Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Bluegranite HCBG02 Hammer Drill Bit Bluegranite HCBG04 Hammer Drill Bit Bluegranite HCBG06 Hammer Drill Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Dewalt DW5228 Percussion Masonry Drill Bit Irwin 4935107 Multi-Material Jobber Length Drill Tapcon 11257 Masonry Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.
Irwin 5026006 Rotary Percussion Masonry Drill Bit Tapcon 11247 Masonry Drill Bit Irwin 4935108 Multi-Material Jobber Length Drill
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills.
Irwin 326000 Rotary Percussion Masonry Drill Bit Irwin 61124 Economy Light Duty Rotary Masonry Drill Bit BIT DRILL M/PURPS 5/32X4X6IN
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
Tapcon 11363 Masonry Drill Bit Irwin 326002 Rotary Percussion Masonry Drill Bit Secure-Grip 48-20-8816 Hammer Drill Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Tapcon 11248 Masonry Drill Bit Irwin 326001 Rotary Percussion Masonry Drill Bit DRILL BIT BUL-MATRL 5/32 X 4
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.
Irwin 326005 Rotary Percussion Masonry Drill Bit DRILL BIT BUL-MATRL 3/16 X 4.5 BIT DRILL M/PURPS 3/16X4X6IN
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
DRILL BIT BUL-MATRL 1/4 X 4.75 Tapcon 11362 Masonry Drill Bit Tapcon 1870565 1-Piece Impact Drill Bit
With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Tapcon 1870567 1-Piece Impact Drill Bit Irwin 5026005 Rotary Percussion Masonry Drill Bit BIT DRILL M/PURPS 1/4X4X6IN
Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
Irwin 326008 Rotary Percussion Masonry Drill Bit Irwin 326003 Rotary Percussion Masonry Drill Bit Bluegranite HCBG09 Hammer Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Tapcon 1870566 1-Piece Impact Drill Bit Irwin 326006 Rotary Percussion Masonry Drill Bit Artu 01010 Drill Bit
Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Artu 1006 1-Piece Concrete Screw Drill Bit Artu 01012 Drill Bit DRILL BIT BUL-MATRL 5/16 X 5.2
Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.
Secure-Grip 48-20-8821 Hammer Drill Bit Irwin 4935109 Multi-Material Jobber Length Drill BIT MASONRY IMPT RDY 1/4X4X6IN
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills. Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. 1/4" hex shank for use in impact drivers. 2 cutter heads. Impact ready. Percussion rated. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction.
Irwin 5026009 Rotary Percussion Masonry Drill Bit Irwin 61128 Economy Light Duty Rotary Masonry Drill Bit Artu 1014 1-Piece Concrete Screw Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards.
Irwin 5026008 Rotary Percussion Masonry Drill Bit Irwin 1792767 Multi-Material Jobber Length Drill Artu 01020 Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Artu 1022 Drill Bit Irwin 50128 Percussion Masonry Drill Bit Irwin 326009 Rotary Percussion Masonry Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Irwin 326011 Rotary Percussion Masonry Drill Bit Tapcon 1870568 1-Piece Impact Drill Bit Tapcon 1870569 1-Piece Impact Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Dewalt DW5230 Percussion Masonry Drill Bit Secure-Grip 48-20-8800 Hammer Drill Bit Irwin 1792768 Multi-Material Jobber Length Drill
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble.
Cobra 582U Masonry Drill Bit BIT MASONRY IMP RDY 5/32X4X6IN Bluegranite HCBG12 Hammer Drill Bit
Used in applications such as drilling in brick, cinder block and tile. Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. For use in impact drivers. 2 cutter heads. Impact ready. Percussion rates. Carbide tipped cutting edge material. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Secure-Grip 48-20-8801 Hammer Drill Bit Artu 1011 1-Piece Concrete Screw Drill Bit Irwin 1792769 Multi-Material Jobber Length Drill
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble.
Secure-Grip 48-20-8805 Hammer Drill Bit Artu 01030 Drill Bit Artu 1021 1-Piece Concrete Screw Drill Bit
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards.
DRILL BIT BUL-MATRL 3/8 X 5.25 Irwin 1792770 Multi-Material Jobber Length Drill Secure-Grip 48-20-8806 Hammer Drill Bit
With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Artu 1032 Drill Bit BIT DRILL M/PURPS 5/16X4X6IN  Irwin 61132 Economy Light Duty Rotary Masonry Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
BIT MASONRY IMP RDY 3/16X4X6IN Artu 1023 1-Piece Concrete Screw Drill Bit Artu 1040 Drill Bit
Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. 1/4" hex shank for use in impact drivers. 2 cutter heads. Impact ready. Percussion rates. Carbide tipped cutting edge material. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Irwin 1792771 Multi-Material Jobber Length Drill BIT DRILL M/PURPS 3/8X4X6IN   Cobra 589U Masonry Drill Bit
For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. Used in applications such as drilling in brick, cinder block and tile.
Irwin 5026015 Rotary Percussion Masonry Drill Bit Artu 1031 1-Piece Concrete Screw Drill Bit Cobra 582Z Masonry Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Used in applications such as drilling in brick, cinder block and tile.
Irwin 5026013 Rotary Percussion Masonry Drill Bit Irwin 5026019 Rotary Percussion Masonry Drill Bit Dewalt DW5234 Percussion Masonry Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Artu 1041 1-Piece Concrete Screw Drill Bit BIT DRILL MASONRY 3/8X13IN    Artu 1042 Drill Bit
Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Secure-Grip 48-20-8830 Hammer Drill Bit Bluegranite HCBG15 Hammer Drill Bit Dewalt DW5235 Percussion Masonry Drill Bit
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 326015 Rotary Percussion Masonry Drill Bit Bluegranite HCBG16 Hammer Drill Bit Irwin 5026016 Rotary Percussion Masonry Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Artu 1050 Drill Bit Dewalt DW5241 Percussion Masonry Drill Bit Cobra 589Z Masonry Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Used in applications such as drilling in brick, cinder block and tile.
Irwin 39104 Installer Drill Bit BIT DRILL HAMMER KIT 3PC      Artu 1052 Drill Bit
BIT DRILL HAMMER KIT 3PC
Our Price: $11.21
Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Set Includes: (1) 5/32" x 6" 3 Flat Secure Grip Hammer Drill Bit, (1) 3/16" x 6" 3-Flat Secure Grip Hammer Drill Bit and (1) 1/4" x 6" 3-Flat Secure Grip Hammer Drill Bit. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Irwin 326019 Rotary Percussion Masonry Drill Bit Cobra 587Z Masonry Drill Bit BIT DRILL M/PURPS 1/2X4X6IN
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Used in applications such as drilling in brick, cinder block and tile. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
BIT DRILL MASONRY 1/2X13IN    BIT HAMMER DRILL 5/8X4X6IN    Irwin 39105 Installer Drill Bit
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems.
BIT HAMMER DRILL 3/4X4X6IN    Irwin 39106 Installer Drill Bit Irwin 5026020 Rotary Percussion Masonry Drill Bit
The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
BIT MASONRY IMPACT RDY 3PC SET Artu 1060 Drill Bit Bluegranite HCBG20 Hammer Drill Bit
Innovative flute design leading to faster material removal for easier drilling. 1/4" hex shank for use in impact drivers. Speed tip penetrates material quickly. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Irwin 5026021 Rotary Percussion Masonry Drill Bit Tapcon 11249 Masonry Drill Bit BIT DRILL MASONRY 5/8X13IN
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.
Irwin 39108 Installer Drill Bit Tapcon 11250 Masonry Drill Bit Dewalt DW5204 Percussion Drill Bit Set
Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Rock carbide tip maximizes carbide surface contact for longer bit life. Four flute design cleans debris out for fast, efficient drilling in applications such as drilling small diameter holes in masonry, concrete, rock, and artificial stone; three flats on shank eliminate bit slipping in chuck. Includes: 3/16"x3", 1/4"x4", 5/16"x6", and 3/8"x6".
Irwin 4935078 Drill Bit Set Artu 1062 Drill Bit BIT DRILL MASONRY 3/4X13IN
High speed steel bits used to drill in brick, block, tile, metal, wood, plastic and marble. Includes (1) one each: 1/8"x4", 5/32"x3-1/2", 3/16"x3-3/4", 1/4"x4" and 5/16"x4-3/4". For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.
Irwin 39109ZR Installer Drill Bit Dewalt DW5244 Percussion Masonry Drill Bit DRILL BIT HAMMER 5/32X3X6IN
Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Robust head for longer life. Various useable lengths. Milled u-flutes with deep cut-spiral for fast dust removal. Diamond ground carbide tip for precise starts to avoid scratching and skating in tile and hard stone. PowerGrip shank for aggressive gripping power. Shank diameter 0.1562; Diameter 5/32"; Flute length 3.0"; Overall length 6.0".
Cobra 584Z Masonry Drill Bit DRILL BIT HAMMER 3/16X4X6IN   Irwin 39110 Installer Drill Bit
Used in applications such as drilling in brick, cinder block and tile. Robust head provides longer life. Steel teeth that extend from the shank are designed to catch between the jaws of power tool chucks. Bit is easy to chuck in the tool and won't slip. Various useable lengths. Milled u-flutes with deep-cut spiral for fast dust removal. Diamond ground carbide tip for precise starts in tile and hard stone. PowerGrip shank for aggressive gripping power. Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems.
Irwin 326022 Rotary Percussion Masonry Drill Bit Artu 1070 Drill Bit DRILL BIT HAMMER 1/4X4X6IN
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. PowerGrip shank for aggressive gripping power. Steel teeth extend from the shank to catch between the jaws of power tool chucks. Easy to chuck in the tool and won't slip. The tip of the BlueGranite turbo bit is Bosch carbide, diamond ground for precise starts to avoid scratching and skating in tile and hard stone. Robust head provides longer life. Various usable lengths. Milled u-flutes with deep-cut spiral for fast dust removal. Diamond ground carbide tip for precise starts in tile and hard stone.
Irwin 5026023 Rotary Percussion Masonry Drill Bit Bluegranite HCBG22 Hammer Drill Bit DRILL BIT HAMMER START SET 5PC
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Robust head for longer life. Various useable lengths. Milled u-flutes with deep cut-spiral for fast dust removal. Diamond ground carbide tip for precise starts to avoid scratching and skating in tile and hard stone. PowerGrip shank for aggressive gripping power. Comes with a convenient pouch for easy storage. The set includes: (1) 5/32" x 2" x 3", (1) 3/16 x 4" x 6", (1) 1/4" x 4" x 6", (1) 5/16 x 4" x 6", (1) 3/8" x 4" x 6".
Bluegranite HCBG24 Hammer Drill Bit Irwin 5026022 Rotary Percussion Masonry Drill Bit Irwin 4935076 Hammer Drill Bit Set
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Bits feature aggressive diamond?ground tips for fast drilling,  optimal flute design for fast dust removal and a shortened carbide tip that allows dust to move into the flute quickly reducing build up. Includes (1) one each: 5/32"x6", 3/16"x6", 1/4"x6", 3/8"x6", and 1/2"x6".
Secure-Grip 48-20-8851 Hammer Drill Bit Set Irwin 326024 Rotary Percussion Masonry Drill Bit DRILL BIT SET MUL-MATRL 5 PC
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Includes 5/32" x 6", 3/16" x 6", 1/4" x 6", 5/16" x 6" and 3/8" x 6". Bit is shot peened, double tempered finish reduces breakage and chrome vanadiam spring steel shaft. The round shank fits all hammer drills with 3 jaw chuck; 1/2 inch shank. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. 5 piece set inlcudes (1) of each: 1/8", 2/16", 1/4", 5/16" and 3/8".
Artu 1075 Drill Bit BIT DRILL SET M/PURPS 5PC     Irwin 39112 Installer Drill Bit
BIT DRILL SET M/PURPS 5PC
Our Price: $22.46
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal than standard bits. Hex shanks and impact rated allows use in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides long life. No skate tip design allows for cleaner holes. Includes: (1) 5/32" x 4" x 6", (1) 3/16" x 4" x 6", (1) 1/4" x 4" x 6", (1)5/16" x 4" x 6" and (1) 3/8" x 4" x 6". Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems.
DRILL BIT PERCUSN SET W/CS 5PC Vermont 14053 Masonry Drill Bit Dewalt DW5207 Percussion Drill Bit Set
Use to power through masonry, concrete, rock, and more with DEWALT Hammer Drill Bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a four flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Two cutter carbide tip maximizes carbide surface contact for longer bit life. Includes: 3/16", 1/4", 5/16", 3/8", and 1/4" bits. The double flute drills fast while carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile with corded or cordless rotary drills. Rock Carbide bits with four flute carbide head that provides longer bit life with a special enlarged flute design that channels debris out of the hole for fast, efficient drilling into masonry, concrete, rock, and artificial stone. The bits in this set are intended to make holes for mechanical anchors. No-Spin Shank to eliminate bit slippage; used with 3/8" and 1/2" sized chucks. Includes: 3/16"x3", 1/4"x4", 5/16"x6", 3/8"x6", 1/2"x6" and (2) 1/4"x6".
Artu 1150 Drill Bit Irwin 326026 Rotary Percussion Masonry Drill Bit Bluegranite HCBG26 Hammer Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Bit is shot peened, double tempered finish reduces breakage and chrome vanadiam spring steel shaft. The round shank fits all hammer drills with 3 jaw chuck; 1/2 inch shank. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Artu 1155 Drill Bit Artu 1160 Drill Bit BIT DRILL HAMMER KIT 7PC
BIT DRILL HAMMER KIT 7PC
Our Price: $28.20
For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. The 3-flat secure grip shank fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. The bit provides superior performance through it reinforced flute geometry and carbide tip design. Delivers ideal quality in a select range of bits. Set includes: (1) 5/32" x 6" 3-flat secure grip hammer drill bit, (2) 3/16" x 6" 3-Flat Secure Grip hammer drill bit, (2) 1/4" x 6" 3-Flat Secure-Grip Hammer drill bit, (1) 5/16" x 6" 3-Flat Secure-Grip Hammer drill bit and (1) 3/8" x 6" 3-Flat Secure Grip Hammer drill bit.
Artu 1165 Drill Bit Artu 1170 Drill Bit Artu 1080 Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Artu 01505 Drill Bit Set Artu 1175 Drill Bit Artu 1180 Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank, diamond ground tip, special negative back grinding enables tip to bore through brick, concrete, masonry, ceramic tile, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action. High tech bonding allows bit to withstand drilling temperatures up to 2,000 degrees Fahrenheit. Easy to resharpen. Includes (one each): 1/8", 3/16", 1/4", 5/16" and 3/8" and plastic case.  NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Packaged in a plastic case. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Artu 1185 Drill Bit Artu 01510 Drill Bit Set
For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank, diamond ground tip, special negative back grinding enables tip to bore through brick, concrete, masonry, ceramic tile, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action. Cobalt and Tungsten carbide tip for max hardness and resistance to heat and wear. No center punch required, eliminates walking. High tech bonding allows bit to withstand drilling temperatures up to 2,000 degrees Fahrenheit. Easy to resharpen. Includes one each: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", and plastic case. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
   
 
1