Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > HEX SHANK MASONRY BIT SETS
Sort By:
1
BIT DRILL MASONRY 3/16X4IN    BIT DRILL MASONRY 1/8X2-1/2IN BIT DRILL MASONRY 1/4X4IN
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.
BIT DRILL MASONRY 5/16X6IN    BIT DRILL MASONRY 3/8X6IN     DRILL BIT BUL-MATRL 1/8 X 4.5
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.
Western States 80246 Masonry Drill Bit Western States 80247 Masonry Drill Bit Irwin 4935105 Multi-Material Jobber Length Drill
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills.
BIT DRILL M/PURPS 5/32X4X6IN  Irwin 4935106 Multi-Material Jobber Length Drill BIT DRILL MASONRY 1/2X6IN
Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.
Irwin 4935107 Multi-Material Jobber Length Drill BIT DRILL M/PURPS 3/16X4X6IN  S-B MC06 Multi-Construction Jobber Length Drill
High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. Steep flute with ribs for optimal dust removal, softened shank for aggressive griping power and customized carbide geometry optimized to handle a variety of material. Can be used in rotary and impact mode in concrete without bit change; drills into many grades of tiles, from granite to porcelain.
DRILL BIT BUL-MATRL 5/32 X 4  DRILL BIT BUL-MATRL 3/16 X 4.5 Irwin 4935108 Multi-Material Jobber Length Drill
With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills.
DRILL BIT BUL-MATRL 1/4 X 4.75 BIT DRILL M/PURPS 1/4X4X6IN   Irwin 4935109 Multi-Material Jobber Length Drill
With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills.
Irwin 1792767 Multi-Material Jobber Length Drill Irwin 1792768 Multi-Material Jobber Length Drill Artu 01010 Drill Bit
For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Artu 01012 Drill Bit DRILL BIT BUL-MATRL 5/16 X 5.2 Artu 01020 Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Artu 1022 Drill Bit BIT DRILL M/PURPS 5/16X4X6IN  Artu 01030 Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
BIT DRILL MASONRY 5/8X6IN     Irwin 1792769 Multi-Material Jobber Length Drill DRILL BIT BUL-MATRL 3/8 X 5.25
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.
Artu 1032 Drill Bit Irwin 1792770 Multi-Material Jobber Length Drill BIT DRILL M/PURPS 3/8X4X6IN
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
Artu 1040 Drill Bit Dewalt DW5226 Percussion Masonry Drill Bit Irwin 1792771 Multi-Material Jobber Length Drill
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble.
BIT HAMMER DRILL 1/4X10X12IN  BIT DRILL MASONRY 3/4X6IN     Dewalt DW5229 Percussion Masonry Drill Bit
The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Artu 1042 Drill Bit DRILL BIT RED HELIX 4PC SET   Prime Line P 7922 Step Drill
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Stays sharper longer. Variable Helix flute geometry for faster material removal. Chip breaker decreases heat buildup. Set includes: (1) 1/8" (3.2mm) with Chip Breaker, (1) 5/32" (4.0 mm) with Chip Breaker, (1) 3/16" (4.8 mm) with Chip Breaker and (1) 1/4" (6.4 mm) with Chip Breaker. Used to attach a variety of plunger latches to window frame.
Irwin 326007 Rotary Percussion Masonry Drill Bit Bluegranite HCBG08 Hammer Drill Bit Dewalt DW5231 Percussion Masonry Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Artu 1050 Drill Bit Artu 1052 Drill Bit BIT DRILL M/PURPS 1/2X4X6IN
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
Dewalt DW5236 Percussion Masonry Drill Bit Dewalt DW2551 Drill Bit Set Artu 1060 Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Black Oxide coating provides longer life. Split point tips to prevent walking and universal 1/4" hex shank locking system prevents slipping. Includes: 1/16", 3/32", 1/8", 5/32", 3/16", and 1/4". For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Irwin 326012 Rotary Percussion Masonry Drill Bit BIT HAMMER DRILL 3/8X10X12IN  Dewalt DW5242 Percussion Masonry Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 4935642 Jobber Length Drill Set Bluegranite HCBG18T/HCBG18 Hammer Drill Bit Irwin 326016 Rotary Percussion Masonry Drill Bit
High quality steel with black oxide finish for corrosion resistance in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank with quick change for ease of use in impact drivers and quick change drill/drivers. Includes: 3/32", 7/64", 1/8", 9/64", and 5/32". Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Artu 1062 Drill Bit Dewalt DW2571 Rotary Drill Bit Set Irwin 326020 Rotary Percussion Masonry Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Carbide tipped for applications such as drilling in brick, block and concrete, rapid load quick change; universal 1/4" hex shank prevents slipping. Includes (1) one each: 5/32", 3/16", and 1/4" bits. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
BIT HAMMER DRILL 1/2X10X12IN  Dewalt DW5245 Percussion Masonry Drill Bit Bluegranite HCBG21 Hammer Drill Bit
The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Artu 1070 Drill Bit DRILL BIT SET IMPACT 9 PIECE  DRILL BIT IMPACT SET 5PC
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. 5 piece set include: (2) 1/8", (1) 5/32", (1) 3/16" and (1) 1/4" drill bit.
Unibit 10231 Self-Starting Step Drill Milwaukee 48-89-9201  Step Drill Bits Irwin 1881078 1-Piece Impact Drill Bit Set
High speed steel bit with single flute cutting edge for greater control through steps; hex shank prevents slipping in drill chuck. SpeedPoint tip penetrates faster and prevents walking in applications such as drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates. Dual-flute design provides greater speed and control. Optimized for cordless drills in high speed. Rapid strike tip creates fast, accurate starts and generates less heat. Optimized geometry with black oxide coating to cut faster. Laser engraved reference marks easily stop on any hole size. 3 flat secure grip shanks reduce bit slippage in the chuck. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One-piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Artu 1075 Drill Bit Unibit 10232 Fractional Self-Starting Step Drill Bit Artu 1150 Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. High speed steel bit with single flute cutting edge for greater control through steps; hex shank prevents slipping in drill chuck. SpeedPoint tip penetrates faster and prevents walking in applications such as drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Irwin 326023 Rotary Percussion Masonry Drill Bit Unibit 15101ZR Self-Starting Step Drill BIT DRILL TITANIUM KIT 10PC
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Self starting bit features single flute cutting edge for greater control through steps; three flatted shank prevents slipping in drill chuck. SpeedPoint tip penetrates faster and prevents walking in applications such as drilling holes into stainless steel, copper, brass, aluminum, plastic, laminates and other thin materials up to 1/8" thick. Titanium coating for up to 3 times the life. Shockwave Impact duty, engineered for drills and impacts. Red Helix designed for rapid chip removal. Chip Breaker for decreased heat buildup. 135? split point for precision start and prevents walking for fast, accurate holes. 10 piece set includes: (2) 1/8" Titanium Shockwave, (1) 9/64" Titanium Shockwave, (1) 5/32" Titanium Shockwave, (1) 11/64" Titanium Shockwave, (1) 3/16" Titanium Shockwave, (1) 1/4" Titanium Shockwave, (1) 7/32" Titanium Shockwave, (1) 5/16" Titanium Shockwave and (1) 3/8" Titanium Shockwave. Also includes a case to carry the bits.
Irwin 1881279 Turbomax Impact Drill Bits BIT IMP DTY HEX TITNM KIT 15PC Artu 1155 Drill Bit
One piece construction. Premium high speed steel with black oxide finish. 1/4" quick-change shank. Set includes: 3/32", 7/64", 1/8", 9/64" and 5/32". Impact Duty Titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a Variable Helix with an aggressive 35? Helix Angle that ends at 15?. Red Helix Design for rapid chip removal. 135? split point for precision start; no walking. Set Includes: (1) 1/16" Titanium Shockwave, (1) 5/64" Titanium Shockwave, (1) 3/32" Titanium Shockwave, (1) 7/64" Titanium Shockwave, (2) 1/8" Titanium Shockwave, (1) 9/64" Titanium Shockwave, (1) 5/32" Titanium Shockwave, (2) 3/16" Titanium Shockwave, (1) 7/32" Titanium Shockwave, (1) 1/4" Titanium Shockwave, (1) 5/16" Titanium Shockwave, (1) 3/8" Titanium Shockwave and (1) 1/2" Titanium Shockwave. Also includes a handy case to carry bits. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Irwin 4935643 Jobber Length Drill Set Artu 1160 Drill Bit Dewalt DW5249 Percussion Masonry Drill Bit
High quality steel with black oxide finish for corrosion resistance in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank Jobber length with quick change for ease of use in impact drivers and quick change drill/drivers and 135 degree split point. Sizes include: 1/16", 5/64", 3/32", 7/64", (2) 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" drills and Lock-N-Load Quick Change. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
DRILL BIT SET TITANIUM 7PC    Irwin 326027 Rotary Percussion Masonry Drill Bit Artu 1165 Drill Bit
Ground from solid 1 piece design and is up to 5 times more durable. Web taper increases the rigidity of the bit to decrease the potential for bit breakage. Pilot point tip allows users to drill holes faster and offers clean burr-free holes. Common users include electricians, HVAC, mechanic, glaziers and General contractors. Designed for metal or wood. 1/4" hex shank. Set includes: (2) 1/8" bits, (1) 5/32" bit, (1) 3/16" bit, (1) 7/32" bit, (1) 1/4" bit and (1) 5/16" bit. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Milwaukee 48-89-9202  Step Drill Bits 14PC STEEL HEEL DRILLBIT SET  Unibit 10233 Self-Starting Step Drill
Dual-flute design provides greater speed and control. Optimized for cordless drills in high speed. Rapid strike tip creates fast, accurate starts and generates less heat. Optimized geometry with black oxide coating to cut faster. Laser engraved reference marks easily stop on any hole size. 3 flat secure grip shanks reduce bit slippage in the chuck. Impact ready shock absorber can be used with both rotary and impact tools. Magnetic steel heel secures bit in holder. Includes 1 each: 1/16?, 5/64?, 3/32?, 7/64?, 1/8?, 9/64?, 5/32?, 11/64?, 3/16?,  13/64?, 7/32?, 15/64", all 1/4" hex shanks, and all ?? hex magnetic bit holder. 9" Overall length. High speed steel bit with single flute cutting edge for greater control through steps; hex shank prevents slipping in drill chuck. SpeedPoint tip penetrates faster and prevents walking in applications such as drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates.
Artu 1170 Drill Bit Artu 1080 Drill Bit Dewalt DD5060 Impact Drill Set
For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Solid one piece design made with high speed steel with black oxide finish and Pilot Point which offers clean burr free holes, educed bit walking; and a 1/4" hex shank. Includes (2) each: 1/8", 9/64", 5/32", 11/64", 3/16", 7/32", 1/4", 5/16", 3/8"  and case.
BIT IMP DTY HEX TITNM KIT 23PC Unibit 10220 Step Drill Unibit 10234 Fractional Self-Starting Step Drill Bit
Engineered for impacts and drills. Designed with a Variable Helix with an aggressive 35? Helix Angle which ends at 15?, the impact duty titanium drill bits with Red Helix provide Rapid Chip Removal to limit heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you up to 3 times the life of black oxide bits. Includes: (2) 1/16" Titanium Shockwave, (2) 5/64" Titanium Shockwave, (1) 3/32" Titanium Shockwave, (2) 7/64" Titanium Shockwave, (2) 1/8" Titanium Shockwave, (1) 9/64" Titanium Shockwave, (2) 5/32" Titanium Shockwave, (1) 11/64" Titanium Shockwave (2) 3/16" Titanium Shockwave, (1) 13/64" Titanium Shockwave, (1) 7/32" Titanium Shockwave, (2) 1/4" Titanium Shockwave, (1) 5/16" Titanium Shockwave, (1) 3/8" Titanium Shockwave and (1) 1/2" Titanium Shockwave. Also includes a handy case to carry bits. Hole enlarging features bit single flute cutting edge for greater control through steps and a a true round hole; 3 flatted shank prevents slipping in drill chuck. Used in applications such as drilling holes into thin stainless steel, copper, brass, aluminum, plastic and laminates; pilot hole required. High speed steel bit with single flute cutting edge for greater control through steps; hex shank prevents slipping in drill chuck. SpeedPoint tip penetrates faster and prevents walking in applications such as drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates.
BIT DRILL STEP NO3 1/4-3/4IN  14PC STEEL HEEL DRILL BIT SET Artu 1175 Drill Bit
Jam-Free performance dual-flute design provides greater speed and control. Up to 2 times faster. Optimized for cordless drills in high speed. Rapid Strike tip creates fast, accurate starts and generates less heat. Optimized geometry with Black Oxide coating to cut faster and produce less heat. Up to 50 percent more holes per battery charge for greater user productivity. Laser engraved reference marks easily stop on any hole size. 3-Flat Secure Grip shanks reduce bit slippage in the chuck. Made in the USA. Impact ready shock absorber can be used with both rotary and impact tools. Magnetic steel heel secures bit in holder. Includes 1 each: 1/16?, 5/64?, 3/32?, 7/64?, 1/8?, 9/64?, 5/32?, 11/64?, 3/16?,  13/64?, 7/32?, 15/64", all 1/4" hex shanks, and all ?? hex magnetic bit holder. 9" Overall length. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
DRILL BIT PERCUSN SET 7/8X12IN Milwaukee 48-89-9204  Step Drill Bits Unibit 15103ZR Self-Starting Step Drill
Use to power through masonry, concrete, rock, and more with DEWALT Hammer Drill Bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a four flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Two cutter carbide tip maximizes carbide surface contact for longer bit life. Dual-flute design provides greater speed and control. Optimized for cordless drills in high speed. Rapid strike tip creates fast, accurate starts and generates less heat. Optimized geometry with black oxide coating to cut faster. Laser engraved reference marks easily stop on any hole size. 3 flat secure grip shanks reduce bit slippage in the chuck. Self starting bit features single flute cutting edge for greater control through steps; three flatted shank prevents slipping in drill chuck. SpeedPoint tip penetrates faster and prevents walking in applications such as drilling holes into stainless steel, copper, brass, aluminum, plastic, laminates and other thin materials up to 1/8" thick.
BIT DRILL STEP NO8 1/2IN-1IN  Artu 1180 Drill Bit Unibit 15104 Self-Starting Step Drill
Jam-Free performance dual-flute design provides greater speed and control. Up to 2 times faster. Optimized for cordless drills in high speed. Rapid Strike tip creates fast, accurate starts and generates less heat. Optimized geometry with Black Oxide coating to cut faster and produce less heat. Up to 50 percent more holes per battery charge for greater user productivity. Laser engraved reference marks easily stop on any hole size. 3-Flat Secure Grip shanks reduce bit slippage in the chuck. Made in the USA. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Self starting bit features single flute cutting edge for greater control through steps; three flatted shank prevents slipping in drill chuck. SpeedPoint tip penetrates faster and prevents walking in applications such as drilling holes into stainless steel, copper, brass, aluminum, plastic, laminates and other thin materials up to 1/8" thick.
Unibit 10239 Self-Starting Step Drill Milwaukee 48-89-9209  Step Drill Bits Artu 1185 Drill Bit
High speed steel bit with single flute cutting edge for greater control through steps; hex shank prevents slipping in drill chuck. SpeedPoint tip penetrates faster and prevents walking in applications such as drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates. Dual-flute design provides greater speed and control. Optimized for cordless drills in high speed. Rapid strike tip creates fast, accurate starts and generates less heat. Optimized geometry with black oxide coating to cut faster. Laser engraved reference marks easily stop on any hole size. 3 flat secure grip shanks reduce bit slippage in the chuck. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
BIT DRILL SET 3PC             Irwin 1881324 1-Piece Corrosion Resistance Impact Drill Bit Set Unibit 10235 Self-Starting Step Drill
BIT DRILL SET 3PC
Our Price: $58.07
Ideal for drilling true round holes with precise control in a variety of materials like sheet metal, metal plates, aluminum, fiberglass, plastics, plexiglass, and wood. The specially designed cutting edge drills true, round holes for a smooth, clean finish, and the SpeedPoint tip penetrates fast, prevents "walking," and eliminates the need for a pilot/starting hole. The hex shank provides a secure grip in the drill chuck. The permanent laser-etched sizes inside the flute are easy to read for precise control during the hole enlarging process. Includes sizes: 1/8" to 1/2", 3/16" to 1/2", 1/4" to 3/4" bits. 10-Piece Pro set (1/8" (2), 9/64", 5/32", 11/64", 3/16", 7/32", 1/4", 5/16", 3/8"). High speed steel bit with single flute cutting edge for greater control through steps; hex shank prevents slipping in drill chuck. SpeedPoint tip penetrates faster and prevents walking in applications such as drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates.
BIT DRILL STEP NO4 2PK        BIT IMP DTY HEX TITNM KIT 29PC BIT DRILL STEP NO5 1/4-3/8IN
BIT DRILL STEP NO4 2PK
Our Price: $78.00
Single cutting edge provides true round holes every time. High speed steel make-up is ideal for cutting into stainless steel, aluminum, brass, copper, plastic and more. Black Oxide finish resists corrosion for longer life. Speed start tip starts fast and reduces the risk of bit walking. Laser etched markings for fast, easy hole size identification. 3-Flat shank prevents bit from slipping in the chuck. Set included: (2) #4 Step Drill Bits, 3/16" -7/8" by 1/16". Includes a soft case to carry the set. Engineered for impacts and drills. Designed with a variable Helix with an aggressive 35 degree Helix Angle which ends at 15 degrees. Provide Chip removal to limit heat buildup to stay sharper longer. The 135 degree split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you 3 times the life verses black oxide drill bits. Set includes: (1) 1/16" Titanium Shockwave, (1) 5/64" Titanium Shockwave, (1) 3/32" Titanium Shockwave, (1) 7/64" Titanium Shockwave, (1) 1/8" Titanium Shockwave, (1) 9/64" Titanium Shockwave, (1) 5/32" Titanium Shockwave, (1) 11/64" Titanium Shockwave, (1) 3/16" Titanium Shockwave, (1) 13/64" Titanium Shockwave, (1) 7/32" Titanium Shockwave, (1) 15/64" Titanium Shockwave, (1) 1/4" Titanium Shockwave, (1) 17/64" Titanium Shockwave, (1) 9/32" Titanium Shockwave, (1) 19/64" Titanium Shockwave, (1) 5/16" Titanium Shockwave, (1) 21/64" Titanium Shockwave, (1)11/32" Titanium Shockwave, (1) 23/64" Titanium Shockwave, (1) 3/8" Titanium Shockwave, (1) 25/64" Titanium Shockwave, (1) 27/64" Titanium Shockwave, (1) 7/16" Titanium Shockwave, (1) 15/32" Titanium Shockwave, (1)  1/2" Titanium Shockwave and a handy case to hold the bits. Jam-Free performance dual-flute design provides greater speed and control. Up to 2 times faster. Optimized for cordless drills in high speed. Rapid Strike tip creates fast, accurate starts and generates less heat. Optimized geometry with Black Oxide coating to cut faster and produce less heat. Up to 50 percent more holes per battery charge for greater user productivity. Laser engraved reference marks easily stop on any hole size. 3-Flat Secure Grip shanks reduce bit slippage in the chuck. Made in the USA.
Milwaukee 48-89-9221 Dual-Flute Step Drill Bit Set BIT DRILL STEP NO9 2PK
BIT DRILL STEP NO9 2PK
Our Price: $102.42
Dual-flute design provides greater speed and control. Optimized for cordless drills in high speed. Rapid strike tip creates fast, accurate starts and generate less heat. Optimized geometry with black oxide coating to cut faster. More holes per battery charge for greater user productivity. Laser engraved reference marks easily stop on any hole size. 3 flat secure grip shanks reduces bit slippage in the chuck. Set includes: (1) #1 step drill bit 1/8"-1/2" by 1/32", (1) #2 step drill bit 3/16"-1/2" by 1/16", (1) #4 step drill bit 3/16"-7/8" by 1/16" and convenient carrying case to carry bits. Single cutting edge provides true round holes every time. High speed steel make-up is ideal for cutting into stainless steel, aluminum, brass, copper, plastic and more. Black Oxide finish resists corrosion for longer life. Speed start tip starts fast and reduces the risk of bit walking. Laser etched markings for fast, easy hole size identification. 3-Flat shank prevents bit from slipping in the chuck. Set included: (2) #9 Step Drill Bits, 7/8" & 1-1/8". Includes a soft case to carry the set.
   
 
1