Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > MASONRY DRILL BIT SETS
Sort By:
1
Irwin 667 Extended Length Aircraft Drill Bit Irwin 667 Extended Length Aircraft Drill Bit Irwin 667 Extended Length Aircraft Drill Bit
M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking.
Irwin 667 Extended Length Aircraft Drill Bit Irwin 667 Extended Length Aircraft Drill Bit S-B MC06 Multi-Construction Jobber Length Drill
M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. Steep flute with ribs for optimal dust removal, softened shank for aggressive griping power and customized carbide geometry optimized to handle a variety of material. Can be used in rotary and impact mode in concrete without bit change; drills into many grades of tiles, from granite to porcelain.
Irwin 667 Extended Length Aircraft Drill Bit Irwin 4935105 Multi-Material Jobber Length Drill DRILL BIT BUL-MATRL 1/8 X 4.5
M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.
Irwin 667 Extended Length Aircraft Drill Bit Irwin 4935106 Multi-Material Jobber Length Drill BIT DRILL AIRCRAFT 1/8X12IN
M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills. High speed steel with split point that keeps the drill from skating on hard materials and eliminates the need for a center punch. All 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit.
Irwin 4935107 Multi-Material Jobber Length Drill BIT DRILL AIRCRAFT 3/16X12IN  Irwin 4935108 Multi-Material Jobber Length Drill
High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills. High speed steel with split point that keeps the drill from skating on hard materials and eliminates the need for a center punch. All 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills.
Irwin 621 Extended Length Aircraft Drill Bit Irwin 621 Extended Length Aircraft Drill Bit BIT DRILL M/PURPS 5/32X4X6IN
M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
DRILL BIT BUL-MATRL 5/32 X 4  DRILL BIT BUL-MATRL 3/16 X 4.5 BIT DRILL M/PURPS 3/16X4X6IN
With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
DRILL BIT BUL-MATRL 1/4 X 4.75 Irwin 621 Extended Length Aircraft Drill Bit BIT DRILL AIRCRAFT 1/4X12IN
With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. High speed steel with split point that keeps the drill from skating on hard materials and eliminates the need for a center punch. All 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit.
BIT DRILL M/PURPS 1/4X4X6IN   Dewalt DW1602 Silver and Deming Extended Length Drill Thunderbolt 48-89-2770 Extended Length Aircraft Drill Bit
Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. Black oxide coated for greater wear resistance; split point drills on contact and prevents walking. Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute. Extended length. Aircraft drill bits are ideal for extra reach and deep drilling applications in metal, wood and plastic. A precision start, 135 degree split point tip starts on contact to keep the bit from walking for fast accurate holes. The 3-flat secure grip shank won't slip in the drill chuck.
BIT DRILL AIRCRAFT 5/16X12IN  Irwin 667 Extended Length Aircraft Drill Bit DRILL BIT 1/8IN X 12IN LONG
High speed steel with split point that keeps the drill from skating on hard materials and eliminates the need for a center punch. All 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. Features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Bosch black oxide bits offer durability, speed and selection to support most general purpose applications. Speed helix design for faster drilling. Easier drilling and reduced heat for extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDG, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
Artu 01010 Drill Bit Artu 01012 Drill Bit DRILL BIT BUL-MATRL 5/16 X 5.2
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.
Irwin 4935109 Multi-Material Jobber Length Drill Irwin 1792767 Multi-Material Jobber Length Drill Artu 01020 Drill Bit
High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Artu 1022 Drill Bit Irwin 667 Extended Length Aircraft Drill Bit Irwin 667 Extended Length Aircraft Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking.
Irwin 1792768 Multi-Material Jobber Length Drill Irwin 621 Extended Length Aircraft Drill Bit Dewalt DW1604 Silver and Deming Extended Length Drill
For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. Black oxide coated for greater wear resistance; split point drills on contact and prevents walking. Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute.
Irwin 1792769 Multi-Material Jobber Length Drill Thunderbolt 48-89-2771 Extended Length Aircraft Drill Bit Artu 01030 Drill Bit
For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. Extended length. Aircraft drill bits are ideal for extra reach and deep drilling applications in metal, wood and plastic. A precision start, 135 degree split point tip starts on contact to keep the bit from walking for fast accurate holes. The 3-flat secure grip shank won't slip in the drill chuck. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
DRILL BIT BUL-MATRL 3/8 X 5.25 Irwin 1792770 Multi-Material Jobber Length Drill Artu 1032 Drill Bit
With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
BIT DRILL M/PURPS 5/16X4X6IN  Irwin 621 Extended Length Aircraft Drill Bit DRILL BIT 3/16IN X 12IN LONG
Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. Features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Bosch black oxide bits offer durability, speed and selection to support most general purpose applications. Speed helix design for faster drilling. Easier drilling and reduced heat for extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDG, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
Artu 1040 Drill Bit Irwin 1792771 Multi-Material Jobber Length Drill Dewalt DW1606 Silver and Deming Extended Length Drill
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. Black oxide coated for greater wear resistance; split point drills on contact and prevents walking. Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute.
BIT DRILL M/PURPS 3/8X4X6IN   Thunderbolt 48-89-2772 Extended Length Aircraft Drill Bit BIT DRILL AIRCRAFT 3/8X12IN
Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. Extended length. Aircraft drill bits are ideal for extra reach and deep drilling applications in metal, wood and plastic. A precision start, 135 degree split point tip starts on contact to keep the bit from walking for fast accurate holes. The 3-flat secure grip shank won't slip in the drill chuck. High speed steel with split point that keeps the drill from skating on hard materials and eliminates the need for a center punch. All 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit.
DRILL BIT 1/4IN X 12IN LONG   Irwin 621 Extended Length Aircraft Drill Bit Artu 1042 Drill Bit
Features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Bosch black oxide bits offer durability, speed and selection to support most general purpose applications. Speed helix design for faster drilling. Easier drilling and reduced heat for extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDG, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials. M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
DRILL BIT RED HELIX 4PC SET   DRILL BIT 5/16IN X 12IN LONG  Dewalt DW1608 Silver and Deming Extended Length Drill
Stays sharper longer. Variable Helix flute geometry for faster material removal. Chip breaker decreases heat buildup. Set includes: (1) 1/8" (3.2mm) with Chip Breaker, (1) 5/32" (4.0 mm) with Chip Breaker, (1) 3/16" (4.8 mm) with Chip Breaker and (1) 1/4" (6.4 mm) with Chip Breaker. Features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Bosch black oxide bits offer durability, speed and selection to support most general purpose applications. Speed helix design for faster drilling. Easier drilling and reduced heat for extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDG, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials. Black oxide coated for greater wear resistance; split point drills on contact and prevents walking. Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute.
Artu 1050 Drill Bit BIT DRILL AIRCRAFT 7/16X12IN  Irwin 39104 Installer Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. High speed steel with split point that keeps the drill from skating on hard materials and eliminates the need for a center punch. All 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems.
Artu 1052 Drill Bit Thunderbolt 48-89-2773 Extended Length Aircraft Drill Bit BIT DRILL M/PURPS 1/2X4X6IN
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Extended length. Aircraft drill bits are ideal for extra reach and deep drilling applications in metal, wood and plastic. A precision start, 135 degree split point tip starts on contact to keep the bit from walking for fast accurate holes. The 3-flat secure grip shank won't slip in the drill chuck. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
Irwin 621 Extended Length Aircraft Drill Bit BIT DRILL AIRCRAFT 1/2X12IN   Irwin 39105 Installer Drill Bit
M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking. High speed steel with split point that keeps the drill from skating on hard materials and eliminates the need for a center punch. All 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems.
Irwin 39106 Installer Drill Bit DRILL BIT 3/8IN X 12IN LONG   Bullet 16748 Masonry Drill Bit Set
Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems. Features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Bosch black oxide bits offer durability, speed and selection to support most general purpose applications. Speed helix design for faster drilling. Easier drilling and reduced heat for extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDG, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials. Carbide tip penetrates surfaces faster while the flute removes material faster; used in applications such as drilling anchor holes when installing flag poles, mail boxes and running electrical conduit. Includes (1) one each: 3/16" x 4", 1/4"x4", 5/16"x4", 3/8"x4", 1/2"x4" and multi-purpose storage case.
Artu 1060 Drill Bit Irwin 4935642 Jobber Length Drill Set Irwin 621 Extended Length Aircraft Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. High quality steel with black oxide finish for corrosion resistance in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank with quick change for ease of use in impact drivers and quick change drill/drivers. Includes: 3/32", 7/64", 1/8", 9/64", and 5/32". M-2 high speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications; split point ensures a true start and eliminates bit walking.
Dewalt DW1610 Silver and Deming Extended Length Drill Thunderbolt 48-89-2774 Extended Length Aircraft Drill Bit Dewalt DW2551 Drill Bit Set
Black oxide coated for greater wear resistance; split point drills on contact and prevents walking. Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute. Extended length. Aircraft drill bits are ideal for extra reach and deep drilling applications in metal, wood and plastic. A precision start, 135 degree split point tip starts on contact to keep the bit from walking for fast accurate holes. The 3-flat secure grip shank won't slip in the drill chuck. Black Oxide coating provides longer life. Split point tips to prevent walking and universal 1/4" hex shank locking system prevents slipping. Includes: 1/16", 3/32", 1/8", 5/32", 3/16", and 1/4".
Irwin 39108 Installer Drill Bit Dewalt DW2571 Rotary Drill Bit Set Artu 1062 Drill Bit
Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems. Carbide tipped for applications such as drilling in brick, block and concrete, rapid load quick change; universal 1/4" hex shank prevents slipping. Includes (1) one each: 5/32", 3/16", and 1/4" bits. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Dewalt DW1612 Silver and Deming Extended Length Drill Irwin 39109ZR Installer Drill Bit Irwin 61170 Drill Bit Set
Black oxide coated for greater wear resistance; split point drills on contact and prevents walking. Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute. Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems. Carbide tipped bits used in masonry applications, 1/2" diameter. Includes: 3/16", 1/4", 5/16", 3/8", 1/2" and plastic case.
Irwin 39110 Installer Drill Bit DRILL BIT 1/2IN X 12IN LONG   Artu 1070 Drill Bit
Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems. Features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Bosch black oxide bits offer durability, speed and selection to support most general purpose applications. Speed helix design for faster drilling. Easier drilling and reduced heat for extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDG, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Dewalt DW1614 Silver and Deming Extended Length Drill Irwin 5026024 Drill Bit Set Irwin 1881078 1-Piece Impact Drill Bit Set
Black oxide coated for greater wear resistance; split point drills on contact and prevents walking. Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute. High speed steel drill bits used in masonry applications. Includes (1) one each: 3 /16", 1/4", 5 /16", 3/ 8", 1/2", and molded plastic case. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One-piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Thunderbolt 48-89-2776 Extended Length Aircraft Drill Bit Artu 1075 Drill Bit Irwin 39112 Installer Drill Bit
Extended length. Aircraft drill bits are ideal for extra reach and deep drilling applications in metal, wood and plastic. A precision start, 135 degree split point tip starts on contact to keep the bit from walking for fast accurate holes. The 3-flat secure grip shank won't slip in the drill chuck. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems.
DRILL BIT SET IMPACT 9 PIECE  Irwin 1881279 Turbomax Impact Drill Bits Artu 1150 Drill Bit
One piece construction. Premium high speed steel with black oxide finish. 1/4" quick-change shank. Set includes: 3/32", 7/64", 1/8", 9/64" and 5/32". For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Irwin 4935643 Jobber Length Drill Set BIT DRILL TITANIUM KIT 10PC   BIT IMP DTY HEX TITNM KIT 15PC
High quality steel with black oxide finish for corrosion resistance in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank Jobber length with quick change for ease of use in impact drivers and quick change drill/drivers and 135 degree split point. Sizes include: 1/16", 5/64", 3/32", 7/64", (2) 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" drills and Lock-N-Load Quick Change. Titanium coating for up to 3 times the life. Shockwave Impact duty, engineered for drills and impacts. Red Helix designed for rapid chip removal. Chip Breaker for decreased heat buildup. 135? split point for precision start and prevents walking for fast, accurate holes. 10 piece set includes: (2) 1/8" Titanium Shockwave, (1) 9/64" Titanium Shockwave, (1) 5/32" Titanium Shockwave, (1) 11/64" Titanium Shockwave, (1) 3/16" Titanium Shockwave, (1) 1/4" Titanium Shockwave, (1) 7/32" Titanium Shockwave, (1) 5/16" Titanium Shockwave and (1) 3/8" Titanium Shockwave. Also includes a case to carry the bits. Impact Duty Titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a Variable Helix with an aggressive 35? Helix Angle that ends at 15?. Red Helix Design for rapid chip removal. 135? split point for precision start; no walking. Set Includes: (1) 1/16" Titanium Shockwave, (1) 5/64" Titanium Shockwave, (1) 3/32" Titanium Shockwave, (1) 7/64" Titanium Shockwave, (2) 1/8" Titanium Shockwave, (1) 9/64" Titanium Shockwave, (1) 5/32" Titanium Shockwave, (2) 3/16" Titanium Shockwave, (1) 7/32" Titanium Shockwave, (1) 1/4" Titanium Shockwave, (1) 5/16" Titanium Shockwave, (1) 3/8" Titanium Shockwave and (1) 1/2" Titanium Shockwave. Also includes a handy case to carry bits.
Artu 1155 Drill Bit DRILL BIT IMPACT SET 5PC      Artu 1160 Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. 5 piece set include: (2) 1/8", (1) 5/32", (1) 3/16" and (1) 1/4" drill bit. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
14PC STEEL HEEL DRILLBIT SET  DRILL BIT SET TITANIUM 7PC    Artu 1165 Drill Bit
Impact ready shock absorber can be used with both rotary and impact tools. Magnetic steel heel secures bit in holder. Includes 1 each: 1/16?, 5/64?, 3/32?, 7/64?, 1/8?, 9/64?, 5/32?, 11/64?, 3/16?,  13/64?, 7/32?, 15/64", all 1/4" hex shanks, and all ?? hex magnetic bit holder. 9" Overall length. Ground from solid 1 piece design and is up to 5 times more durable. Web taper increases the rigidity of the bit to decrease the potential for bit breakage. Pilot point tip allows users to drill holes faster and offers clean burr-free holes. Common users include electricians, HVAC, mechanic, glaziers and General contractors. Designed for metal or wood. 1/4" hex shank. Set includes: (2) 1/8" bits, (1) 5/32" bit, (1) 3/16" bit, (1) 7/32" bit, (1) 1/4" bit and (1) 5/16" bit. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Artu 1170 Drill Bit Artu 1080 Drill Bit 14PC STEEL HEEL DRILL BIT SET
For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Impact ready shock absorber can be used with both rotary and impact tools. Magnetic steel heel secures bit in holder. Includes 1 each: 1/16?, 5/64?, 3/32?, 7/64?, 1/8?, 9/64?, 5/32?, 11/64?, 3/16?,  13/64?, 7/32?, 15/64", all 1/4" hex shanks, and all ?? hex magnetic bit holder. 9" Overall length.
BIT IMP DTY HEX TITNM KIT 23PC Artu 1175 Drill Bit Artu 1180 Drill Bit
Engineered for impacts and drills. Designed with a Variable Helix with an aggressive 35? Helix Angle which ends at 15?, the impact duty titanium drill bits with Red Helix provide Rapid Chip Removal to limit heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you up to 3 times the life of black oxide bits. Includes: (2) 1/16" Titanium Shockwave, (2) 5/64" Titanium Shockwave, (1) 3/32" Titanium Shockwave, (2) 7/64" Titanium Shockwave, (2) 1/8" Titanium Shockwave, (1) 9/64" Titanium Shockwave, (2) 5/32" Titanium Shockwave, (1) 11/64" Titanium Shockwave (2) 3/16" Titanium Shockwave, (1) 13/64" Titanium Shockwave, (1) 7/32" Titanium Shockwave, (2) 1/4" Titanium Shockwave, (1) 5/16" Titanium Shockwave, (1) 3/8" Titanium Shockwave and (1) 1/2" Titanium Shockwave. Also includes a handy case to carry bits. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Dewalt DD5060 Impact Drill Set Irwin 1881324 1-Piece Corrosion Resistance Impact Drill Bit Set Artu 1185 Drill Bit
Solid one piece design made with high speed steel with black oxide finish and Pilot Point which offers clean burr free holes, educed bit walking; and a 1/4" hex shank. Includes (2) each: 1/8", 9/64", 5/32", 11/64", 3/16", 7/32", 1/4", 5/16", 3/8"  and case. 10-Piece Pro set (1/8" (2), 9/64", 5/32", 11/64", 3/16", 7/32", 1/4", 5/16", 3/8"). For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
BIT IMP DTY HEX TITNM KIT 29PC
Engineered for impacts and drills. Designed with a variable Helix with an aggressive 35 degree Helix Angle which ends at 15 degrees. Provide Chip removal to limit heat buildup to stay sharper longer. The 135 degree split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you 3 times the life verses black oxide drill bits. Set includes: (1) 1/16" Titanium Shockwave, (1) 5/64" Titanium Shockwave, (1) 3/32" Titanium Shockwave, (1) 7/64" Titanium Shockwave, (1) 1/8" Titanium Shockwave, (1) 9/64" Titanium Shockwave, (1) 5/32" Titanium Shockwave, (1) 11/64" Titanium Shockwave, (1) 3/16" Titanium Shockwave, (1) 13/64" Titanium Shockwave, (1) 7/32" Titanium Shockwave, (1) 15/64" Titanium Shockwave, (1) 1/4" Titanium Shockwave, (1) 17/64" Titanium Shockwave, (1) 9/32" Titanium Shockwave, (1) 19/64" Titanium Shockwave, (1) 5/16" Titanium Shockwave, (1) 21/64" Titanium Shockwave, (1)11/32" Titanium Shockwave, (1) 23/64" Titanium Shockwave, (1) 3/8" Titanium Shockwave, (1) 25/64" Titanium Shockwave, (1) 27/64" Titanium Shockwave, (1) 7/16" Titanium Shockwave, (1) 15/32" Titanium Shockwave, (1)  1/2" Titanium Shockwave and a handy case to hold the bits.
   
 
1