Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > INSTALLER DRILL BITS
Sort By:
1
Irwin 4935105 Multi-Material Jobber Length Drill DRILL BIT BUL-MATRL 1/8 X 4.5 Irwin 4935106 Multi-Material Jobber Length Drill
High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills.
Irwin 4935107 Multi-Material Jobber Length Drill Irwin 4935108 Multi-Material Jobber Length Drill BIT DRILL M/PURPS 5/32X4X6IN
High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
DRILL BIT BUL-MATRL 5/32 X 4  DRILL BIT BUL-MATRL 3/16 X 4.5 BIT DRILL M/PURPS 3/16X4X6IN
With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
DRILL BIT BUL-MATRL 1/4 X 4.75 BIT DRILL M/PURPS 1/4X4X6IN   Artu 01010 Drill Bit
With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Artu 01012 Drill Bit DRILL BIT BUL-MATRL 5/16 X 5.2 Irwin 4935109 Multi-Material Jobber Length Drill
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and  cast iron. Can also be used in hammer drills.
Irwin 1792767 Multi-Material Jobber Length Drill Artu 01020 Drill Bit Artu 1022 Drill Bit
For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Irwin 1792768 Multi-Material Jobber Length Drill Irwin 1792769 Multi-Material Jobber Length Drill Artu 01030 Drill Bit
For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
DRILL BIT BUL-MATRL 3/8 X 5.25 Irwin 1792770 Multi-Material Jobber Length Drill Artu 1032 Drill Bit
With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
BIT DRILL M/PURPS 5/16X4X6IN  Artu 1040 Drill Bit Irwin 1792771 Multi-Material Jobber Length Drill
Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble.
BIT DRILL M/PURPS 3/8X4X6IN   Artu 1042 Drill Bit Artu 1050 Drill Bit
Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Irwin 39104 Installer Drill Bit Artu 1052 Drill Bit BIT DRILL M/PURPS 1/2X4X6IN
Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
Irwin 39105 Installer Drill Bit BIT DRL 3/8IN REDC SHNK 9/16IN Irwin 39106 Installer Drill Bit
Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems. Steel bit with split point that eliminates the need for a center punch and keeps from skating on hard materials; three flats on the shank for better grip on chuck. Used in applications on farms and in machine shops. Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems.
Irwin 911 Regular Length Silver and Deming Drill Bit Artu 1060 Drill Bit DRILL BIT 9/16IN BLACK OXIDE
M-7 high speed steel for strength, heat resistance, and wear resistance when drilling in wood, metal or plastic; can be used with keyless chuck. Three-flatted shank design provides better chuck grip and reduces slippage. All Silver and Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
Irwin 911 Regular Length Silver and Deming Drill Bit BIT DRILL 3/8IN RDC SHNK 5/8IN Irwin 39108 Installer Drill Bit
M-7 high speed steel for strength, heat resistance, and wear resistance when drilling in wood, metal or plastic; can be used with keyless chuck. Three-flatted shank design provides better chuck grip and reduces slippage. All Silver and Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills. Steel bit with split point that eliminates the need for a center punch and keeps from skating on hard materials; three flats on the shank for better grip on chuck. Used in applications on farms and in machine shops. Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems.
DRILL BIT 5/8IN BLACK OXIDE   Irwin 911 Regular Length Silver and Deming Drill Bit BIT DRILL W/CS 13PC 1/16-1/4IN
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials. M-7 high speed steel for strength, heat resistance, and wear resistance when drilling in wood, metal or plastic; can be used with keyless chuck. Three-flatted shank design provides better chuck grip and reduces slippage. All Silver and Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills. Super hard coating reduces friction and heat build-up and 135 degree split point eliminates the need for a center punch and keeps the drill from skating on the hard materials. All sizes 3/16" and larger have 3 flats on the shank for a better chuck to drill bit grip. All sizes 13/32" and above have a 3/8" reduced shank. Includes (1) each: 1/6", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4" and case with pilfer proof tab.
Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill
High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated).
Thunderbolt 48-89-2740 Silver and Deming Drill Bit BIT DRIL 3/8RDC X 11/16IN SHNK Irwin 631 Jobber Length Drill
Designed for extreme durability and long life. Parabolic flute form clears chips and debris fast to keep the bit cool. A precision start 135 split point tip starts on contact to keep the bit from walking for fast accurate holes. Ideal for drilling on curved surfaces. Requires less effort to drill and is highly recommended for use with portable drills. Reduced shank diameter for use in 1/2'' chucks. The 3-flat secure grip shank won't slip in the drill chuck. Includes: (1) S & D Black Oxide drill bit. Steel bit with split point that eliminates the need for a center punch and keeps from skating on hard materials; three flats on the shank for better grip on chuck. Used in applications on farms and in machine shops. High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated).
Artu 1062 Drill Bit Irwin 911 Regular Length Silver and Deming Drill Bit BIT DRILL 3/8IN RDC SHNK 3/4IN
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. M-7 high speed steel for strength, heat resistance, and wear resistance when drilling in wood, metal or plastic; can be used with keyless chuck. Three-flatted shank design provides better chuck grip and reduces slippage. All Silver and Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills. Steel bit with split point that eliminates the need for a center punch and keeps from skating on hard materials; three flats on the shank for better grip on chuck. Used in applications on farms and in machine shops.
Dewalt DW1620 Silver and Deming Drill Bit Irwin 39109ZR Installer Drill Bit Thunderbolt 48-89-2742 Silver and Deming Drill Bit
Black oxide coated for greater wear resistance; split point drills on contact and prevents walking. Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute. Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems. Designed for extreme durability and long life. Parabolic flute form clears chips and debris fast to keep the bit cool. A precision start 135 split point tip starts on contact to keep the bit from walking for fast accurate holes. Ideal for drilling on curved surfaces. Requires less effort to drill and is highly recommended for use with portable drills. Reduced shank diameter for use in 1/2'' chucks. The 3-flat secure grip shank won't slip in the drill chuck. Includes: (1) S & D Black Oxide drill bit.
Irwin 911 Regular Length Silver and Deming Drill Bit DRILL BIT 3/4IN BLACK OXIDE   Irwin 39110 Installer Drill Bit
M-7 high speed steel for strength, heat resistance, and wear resistance when drilling in wood, metal or plastic; can be used with keyless chuck. Three-flatted shank design provides better chuck grip and reduces slippage. All Silver and Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills. Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials. Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems.
Artu 1070 Drill Bit BIT DRILL TITANIUM SET 17PC   Dewalt DW1622 Silver and Deming Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Super hard coating reduces friction and heat build-up. Surface drills cooler, lessens torque and downward drilling pressure. All sizes 3/16" and larger have 3 flats on the shank for a better grip on the drill bit. All sizes 13/32" and above have a 3/8" reduced shank; 135 degree split point eliminates the need for a center punch and keeps the drill from skating. Includes (1) one each: 5/64", 3/32", 7/64", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 5/16", and 3/8" and (2) two each: 1/16", 1/8", plastic case with rubberized grip panels. Black oxide coated for greater wear resistance; split point drills on contact and prevents walking. Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute.
Irwin 631 Jobber Length Drill Dewalt DW1341 Speed Tip Drill Bit Set Irwin 911 Regular Length Silver and Deming Drill Bit
High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). Titanium coating for longer life. Speed tip reduces walking on start. Ideal use in commercial and residential applications for drilling in metal, wood and plastics. No spin shanks keeps the bit secure in the drill . Included tough case container to keep bits organized. Set includes bits sized from 1/16 to 1/2''. M-7 high speed steel for strength, heat resistance, and wear resistance when drilling in wood, metal or plastic; can be used with keyless chuck. Three-flatted shank design provides better chuck grip and reduces slippage. All Silver and Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills.
Dewalt DW1363 Drill Bit Set Irwin 631 Jobber Length Drill Dewalt DW1623 Silver and Deming Drill Bit
Made of industrial grade steel with extra hard titanium coating for maximum service. Split point drill bits used in applications such as drilling in light gauge metals. Includes: 1/16", 5/64", (2) 3/32", 7/64", (2)1/8", 9/64", 5/32", 3/16", 7/32", 1/4" and case. High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). Black oxide coated for greater wear resistance; split point drills on contact and prevents walking. Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute.
BIT DRILL 1/2IN RDC SHNK 7/8IN Irwin 911 Regular Length Silver and Deming Drill Bit Artu 1075 Drill Bit
Steel bit with split point that eliminates the need for a center punch and keeps from skating on hard materials; three flats on the shank for better grip on chuck. Used in applications on farms and in machine shops. M-7 high speed steel for strength, heat resistance, and wear resistance when drilling in wood, metal or plastic; can be used with keyless chuck. Three-flatted shank design provides better chuck grip and reduces slippage. All Silver and Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Irwin 39112 Installer Drill Bit Thunderbolt 48-89-2746 Silver and Deming Drill Bit Irwin 631 Jobber Length Drill
Constructed from premium alloy steel with 82 degree point for fast boring. Wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings, and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers, and security systems. Designed for extreme durability and long life. Parabolic flute form clears chips and debris fast to keep the bit cool. A precision start 135 split point tip starts on contact to keep the bit from walking for fast accurate holes. Ideal for drilling on curved surfaces. Requires less effort to drill and is highly recommended for use with portable drills. Reduced shank diameter for use in 1/2'' chucks. The 3-flat secure grip shank won't slip in the drill chuck. Includes: (1) S & D Black Oxide drill bit. High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated).
Dewalt DW1625 Silver and Deming Drill Bit Artu 1150 Drill Bit Irwin 631 Jobber Length Drill
Black oxide coated for greater wear resistance; split point drills on contact and prevents walking. Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated).
BIT DRILL 1/2IN RDCD 1IN SHNK DRIL BIT ST TTNM PP 14PC 1/2IN Irwin 631 Jobber Length Drill
Steel bit with split point that eliminates the need for a center punch and keeps from skating on hard materials; three flats on the shank for better grip on chuck. Used in applications on farms and in machine shops. Titanium pilot point for longer life. Starts on contacts for cleaner holes. No spin shanks. Ideal for drilling in wood and plastic. Includes bit sizes: (2) 1/16", 5/64", 3/32, 7/64", (2) 1/8", 9/64", 1/2", 3/8", 5/18", 1/4", 3/16", 5/32", and a plastic tough case. High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated).
Irwin 631 Jobber Length Drill Irwin 911 Regular Length Silver and Deming Drill Bit Artu 1155 Drill Bit
High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). M-7 high speed steel for strength, heat resistance, and wear resistance when drilling in wood, metal or plastic; can be used with keyless chuck. Three-flatted shank design provides better chuck grip and reduces slippage. All Silver and Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Thunderbolt 48-89-2750 Silver and Deming Drill Bit Irwin 631 Jobber Length Drill Artu 1160 Drill Bit
Designed for extreme durability and long life. Parabolic flute form clears chips and debris fast to keep the bit cool. A precision start 135 split point tip starts on contact to keep the bit from walking for fast accurate holes. Ideal for drilling on curved surfaces. Requires less effort to drill and is highly recommended for use with portable drills. Reduced shank diameter for use in 1/2'' chucks. The 3-flat secure grip shank won't slip in the drill chuck. Includes: (1) S & D Black Oxide drill bit. High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Irwin 911 Regular Length Silver and Deming Drill Bit Dewalt DW1627 Silver and Deming Drill Bit Dewalt DW1263 Pilot Point Bit Set
M-7 high speed steel for strength, heat resistance, and wear resistance when drilling in wood, metal or plastic; can be used with keyless chuck. Three-flatted shank design provides better chuck grip and reduces slippage. All Silver and Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills. Black oxide coated for greater wear resistance; split point drills on contact and prevents walking. Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute. Industrial strength cobalt for optimum life and durability in applications such as stainless steel and other hard metals. Pilot point tip starts on contact for clean, accurate holes and reduces lock up on breakthrough. Includes (2) two each: 1/16", 3/32" and 1/8"; 1 each: 5/64", 7/64, 9/64", 5/32", 3/16", 7/32", 1/4"and 5/16" and (1) plastic index box.
Irwin 316015 Drill Bit Set Thunderbolt 48-89-0011 Drill Bit Set Artu 1165 Drill Bit
Constructed of M-42 eight percent cobalt high speed steel for super abrasive resistance in tough metals. Bits have a 135 degree split point which reduces feed pressure for easier penetration. Includes: (2) 1/16", (2) 5/64", 3/32", (2) 7/64", 1/8", (2) 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"  and (1) rubber-sided case with sliding latch for added security. Thunderbolt web, provides longer life and faster driller times. Parabolic flute, clears chips faster. 135 degree split point, precision start no walking. Titanium coating keeps the bits sharp. 14 piece Thunderbolt Titanium Coated drill bit set contains: (1) 1/16", (1) 5/64", (1) 3/32", (1) 7/64", (2) 1/8", (1) 9/64", (1) 5/32", (1) 3/16", (1) 7/32", (1) 1/4", (1) 5/16", (1) 3/8" and (1) 1/2". For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Irwin 631 Jobber Length Drill Dewalt DW1629 Silver and Deming Drill Bit Artu 1170 Drill Bit
High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). Black oxide coated for greater wear resistance; split point drills on contact and prevents walking. Parabolic flute design improves chip ejection in metal and wood drilling applications. Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Artu 1080 Drill Bit Irwin 631 Jobber Length Drill BIT DRILL PVB COBALT SET 17PC
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). Made of M35 steel, 5 percent cobalt, with extra thick drill core for rigidity and strength. Used in applications such as stainless steel and space age alloys. All sizes 3/16" and larger have 3 flats on the shank for a better grip on the drill bit. The 135 degree split point eliminates the need for a center punch and keeps the drill from skating on hard materials. Includes (1) one each:  5/64, 3/32, 7/64, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 5/16, 3/8" and (2) two each: 1/16", 1/8",  plastic case with rubberized grip panels.
Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill Thunderbolt 48-89-2754 Silver and Deming Drill Bit
High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). Designed for extreme durability and long life. Parabolic flute form clears chips and debris fast to keep the bit cool. A precision start 135 split point tip starts on contact to keep the bit from walking for fast accurate holes. Ideal for drilling on curved surfaces. Requires less effort to drill and is highly recommended for use with portable drills. Reduced shank diameter for use in 1/2'' chucks. The 3-flat secure grip shank won't slip in the drill chuck. Includes: (1) S & D Black Oxide drill bit.
Irwin 631 Jobber Length Drill BIT DRILL COBALT KIT 15PC     Irwin 631 Jobber Length Drill
BIT DRILL COBALT KIT 15PC
Our Price: $37.72
High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). Engineered for extreme durability and long life in hard metal applications. Designed with a variable Helix that includes an aggressive 35? Helix Angle which ends at 15?, the Cobalt bits with Red Helix provide rapid Chip Removal limiting heat build-up to stay sharper longer. 135? split point for precision start no walking. Chip Breaker decreases heat build-up. Secure Grip prevents bit from slipping in chuck. The set contains (1) 1/16" Cobalt Red Helix drill bit, (1) 5/64" Cobalt Red Helix drill bit, (1) 3/32" Cobalt Red Helix drill bit, (1) 7/64 Cobalt Red Helix drill bit, (2) 1/8" Cobalt Red Helix drill bit, (1) 9/64" Cobalt Red Helix drill bit, (1) 5/32" Milwaukee Thunderbolt Cobalt drill bit, (1) 3/16" Cobalt Red Helix, (1)7/32" Cobalt Red Helix, (2) 1/4" Cobalt Red Helix, (1) 5/16" Milwaukee Thunderbolt Cobalt drill bit, (1) 3/8" Cobalt Red Helix, (1) 1/2" Milwaukee Thunderbolt Cobalt drill bit and case. High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated).
Irwin 631 Jobber Length Drill Artu 1175 Drill Bit BIT DRILL TITANIUM SET 21PC
High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Super hard coating reduces friction and heat build-up, lasts longer than standard drills. Surface drills cooler, lessens torque and downward drilling pressure. All sizes 3/16" and larger have 3 flats on the shank for a better grip on the drill bit. All sizes 13/32" and above have a 3/8" reduced shank. The 135 degree split point eliminates the need for a center punch and keeps the drill from skating on the hard materials. Includes (1) one each: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/16", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8" and metal case with pilfer proof tab.
Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill
High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated).
Irwin 631 Jobber Length Drill Artu 1180 Drill Bit Irwin 631 Jobber Length Drill
High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated).
Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill
High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated).
Irwin 631 Jobber Length Drill Artu 1185 Drill Bit Irwin 631 Jobber Length Drill
High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated). For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. High speed steel with M-35, five percent cobalt,  for higher heat and abrasion resistance; heavy duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy duty abrasive alloy metal drilling on hardened steel (heat-treated).
INDEX SET CBLT 21PC 1/16-3/8IN
   
 
1