|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
Split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. For ferrous and non-ferrous metals.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. For ferrous and non-ferrous metals.
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
No-spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No-spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
No-spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16" and above for better chuck grip. Jobbers length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16" and above for better chuck grip. Jobbers length.
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilot point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough, bit spinning in the chuck has been eliminated, and tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16" and above for better chuck grip. Jobbers length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16" and above for better chuck grip. Jobbers length.
|
High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16" and above for better chuck grip. Jobbers length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16" and above for better chuck grip. Jobbers length.
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16" and above for better chuck grip. Jobbers length.
|
No-spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
Pilot point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough, bit spinning in the chuck has been eliminated, and tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
No-spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
Pilot point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough, bit spinning in the chuck has been eliminated, and tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16" and above for better chuck grip. Jobbers length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 degree split point on all bits above 1/8"; jobber length.
|
High speed M-2 steel bit drills exact size hole for tapping; use where non fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No-spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
No-spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
Each metal drill bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers superior durability, speed and selection to support most general purpose applications. Speed helix design for three times faster drilling than standard bits. Easier drilling, reduced heat and extended drill bit life. For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16" and above for better chuck grip. Jobbers length.
|
High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16" and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
Pilot point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough, bit spinning in the chuck has been eliminated, and tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No-spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
Black oxide for durability, longer life and faster drill times, bits feature a parabolic flute that clears chips faster; split point drills on contact and prevents walking; jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
