Sort By:
SHROUD DRILLNG W/SDS&DUST TRAP Vulcan YH-RS004 Work Support Roller Stand Cleanstream 9034000 HEPA Cartridge Filter
Roller support stand,black shiny finish, with yellow plastic adjustable roller handle. Open range size, 7-1/8" W x  26-9/16" , 42-1/2" H, zinc plated roller, 11-1/4" W x 1-7/8" Dia. x 0.039 (1.0mm), folding size, 29-3/4" L x 17-1/8" W x 2-3/4" H, square feet tube, 21" L x 1-3/16" W x 0.059" (1.5mm), load capacity, 198 lbs. For both wet and dry pickup. Resists clogging, allows for maintaining suction power even when used on fine debris like drywall dust. Able to pickup cold fireplace ash, auto refinishing, cement dust, sawdust, and water. Reusable, easy to clean, just tap or rinse. Fits most Shop-Vac wet/dry vacs. Does not fit the 1x1, BullDog Portable, Mighty Mini, Hippo, or AllAround series vacs.
LEG STAND FOR RK7136.2 SAW    BAGS DUST FLEECE FOR/8960-20  Dewalt D24001 Folding Stand
Leg stand for the RK7136.2 (711.6411) miter saw. 4 easily attached legs allow users to accurately and safely use the miter saw away from the work bench. Legs slide into pockets in the miter saw base and secure with large thumb screws. Leg stand includes rolling material supports that attach to a 2" x 4" (Not Included). The rolling material supports also include material stops for repetitive cuts. Fleece bag is fully enclosed and acts a pre-filter which will prolong the life of the main filter and minimize dust exposure during disposal. Use with the Milwaukee 8 gallon Dust Extractor (8960-20) to capture fine dust. Lightweight and durable steel stand has adjustable height and folds for transport. For use with No.D24000 (770.2525).
Our Price: $80.84
Add true mobility to your Universal Steel stand. Includes (4) heavy-duty casters. Dual-locking mechanism protects against caster roll and pivot. Includes all necessary hardware. Milwaukee SDS Max Dust Extraction attachment provides users with a solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153). The attachment is optimized for all drilling depths and any hole ranging from1/4" and 2-3/4" in diameter. Its removable brush rings allows for increased tool life when performing larger dry coring applications. Attach to the Milwaukee 8960-20 8 Gallon Dust Extractor. Includes: (1) SDS max dust extraction attachment (5317-DE) and (1) hose clip adaptor (49-90-1959). Table saw stand for Worm Drive table saw. The portable jobsite Worm drive table saw stand is made exclusively for (8889081) . Set-up for the job is quick and easy with tool-less latches to secure the table saw. Designed for portability, weighing only 14 lbs.
FILTER RPLCMT MAIN FOR/8960-20 SHROUD DUST CUTTING           Dewalt DW7450 Table Saw Stands
Our Price: $84.03
Durable PTFE membrane material for 99.9% filter efficiency for tough dust producing applications. Durable and washable. Use with Milwaukee 8 gallon Dust Extractor (8960-20). Provides users with a solution for the regulation on respirable crystalline silica dust. Optimized for cutting applications with both AC and DC Milwaukee small angle grinders. Attach to the Milwaukee (8960-20) 8 gallon Dust Extractor for a complete OSHA Table 1 compliant solution Folds for easy storage. Portable, lightweight and durable. Fits No.DW745 (SKU 281.2428) jobsite table saw.
Use for dust collection and air filtration. Max Chisel Boot is optimized for the (2717-22) and (5317-21) Milwaukee SDS Max Rotary Hammers for chipping applications with bull point and flat chisels up to 1-1/8" wide. Its adjustable strap secures the hose away from the application allowing for increased productivity. Compatible with major brands of SDS plus rotary hammers. Includes: (1) SDS Max Chisel boot (5318-DE) and (1) Hose Clip Adaptor (49-90-1959). High density bristles provide maximum dust collection and containment. Provides users with a solution for the regulation on respirable crystalline silica dust. Optimized for surface grinding applications with both AC and DC Milwaukee small angle grinders. OSHA Table 1 Compliant when used with Milwaukee (8960-20) 8 gallon Dust Extractor. Quick & easy installation just attach and go. Heavy-duty all steel construction, stand supports up to 400 lbs. Universal design accommodates all brands of miter saws, including 12" sliding miter saws. Quick-release mounting brackets for easy miter saw mounting and removal. Tool-free adjustment of material supports and extension arms. Material supports include rollers and positive stops for repetitive cuts. Weighs 41.8 lbs.
MK Diamond 160131-MK Folding Stand EXTRACTOR TOOL DUST 18V       Dewalt Rolling Table Saw Stand
Our Price: $146.05
Portable tile saw stand for No.MK370 EXP model tile saw; weighs 3.1 lbs. Rolling table saw stand weighs only 33lbs. Heavy-duty kick stand allows the stand to balance upright for mobility and storage. Wide stand base and offset rear legs provide stability and support for material feed control. Heavy-duty aluminum construction withstands loads up to 200 lbs. Rubber feet keep the stand from sliding on smooth surfaces. Table top height provides the user ideal table top positioning for a wide variety of table saw applications.
Dewalt DWX723 Miter Saw Stand EXTRACTOR DUST KIT 2BATT 12V  Dewalt DWX726 Rolling Miter Saw Stand
Universal design works with all brands of miter saws. Lightweight aluminum construction, 5-1/2 ft. beam extends to support up to 16 ft. of material and up to 400 lbs. Legs provide support and fold for easy storage. Work stops/supports can be repositioned quickly anywhere along the rail. Non-marring feet, Miter Saw Not Included. Includes: (1) heavy duty miter sawstand, (2) convertible work supports/stops and (2) mounting brackets. 3-mode switch with auto-on option. Lightweight at only 3.3 lbs. to minimize fatigue in overhead and horizontal drilling applications. Powerful suction for dust extraction reduces the potential for silica dust inhalation by user. Universal handle system is compatible with major brands of SDS Plus Rotary Hammers and AC/DC Hammer Drills. Includes: 12V Cordless Dust Extractor, (2) RedLithium batteries, M12 charger, HEPA filter, nozzle, (3) side handle clamping collar assemblies, and carrying case. Wide adjustable infeed and outfeed roller work supports provide up to 8' of material support. Adjustable mounting rails adapt to nearly any miter saw or portable thickness planer. Wide rubber grip wheels provide jobsite mobility. 3-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up. Durable tubular steel constriction allows for a 300 lb max weight capacity. Compact vertical storage. Weighs 67 lbs. Miter Saw Not Included.
Kreg PRS2100 Router Tables
Features a full size router table in a compact, portable package. Durable and versatile. Equipped with all new Level-Loc reducing rings that twist into place and lock in level and flush with the plate surface. The plate comes with three rings: 1", 12/16" (for use with Porter-Cable style guide bushings) and 25/8". Markings make it easy to center and mount any router. Heavy-duty aluminum fence with new clamps that allow quick, confident fence adjustment. Just flip the cams up, move the fence, and then flip the cams back down to lock the fence in place.