Home > POWER TOOLS & ACC > POWER TOOLS > STATIONARY POWER TOOL ACC > MOTOR ARBORS & MANDRELS
Sort By:
1
CDCO 606-5/8 Grinding Attachment CDCO 606-1/2 Grinding Attachment Irwin 42906 Forstner Bit
For grinding or buffing. Right hand thread only. For grinding or buffing. Right hand thread only. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses.
Irwin 42904 Forstner Bit Dewalt DW5226 Percussion Masonry Drill Bit BIT HAMMER DRILL 1/4X10X12IN
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications.
Irwin 42908 Forstner Bit Irwin 42936 Forstner Bit Extension Dewalt DW5229 Percussion Masonry Drill Bit
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. For use with 3/8" shank bits. Includes hex key. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 5026011 Rotary Percussion Masonry Drill Bit Irwin 326007 Rotary Percussion Masonry Drill Bit Precision Shear PB-001 Forstner Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life.
Precision Shear PB-002 Forstner Bit Bluegranite HCBG08 Hammer Drill Bit Dewalt DW5231 Percussion Masonry Drill Bit
Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 42910 Forstner Bit Irwin 42914 Forstner Bit Irwin 42912 Forstner Bit
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses.
Precision Shear PB-003 Forstner Bit Dewalt DW5236 Percussion Masonry Drill Bit Precision Shear PB-004 Forstner Bit
Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life.
Irwin 42916 Forstner Bit Irwin 326012 Rotary Percussion Masonry Drill Bit Precision Shear PB-005 Forstner Bit
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life.
BIT HAMMER DRILL 3/8X10X12IN  Irwin 42918 Forstner Bit Dewalt DW5242 Percussion Masonry Drill Bit
The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Precision Shear PB-006 Forstner Bit Irwin 42920 Forstner Bit Bluegranite HCBG18T/HCBG18 Hammer Drill Bit
Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Irwin 326016 Rotary Percussion Masonry Drill Bit Precision Shear PB-008 Forstner Bit Irwin 326020 Rotary Percussion Masonry Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
BIT HAMMER DRILL 1/2X10X12IN  Dewalt DW5245 Percussion Masonry Drill Bit Kreg KMS7215  Band Saw/Router Table Adjuster
The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Time-saving and accurate saw fence micro-adjuster. Allows you to dial-in precise adjustments easily with one hand to your Kreg Precision router table or Precision band saw down to .005". Easy to grip ribbed dial. Black plastic fixing knob. Dimensions: 7" x 2" x 5".
Precision Shear PB-007 Forstner Bit Precision Shear PB-009 Forstner Bit Bluegranite HCBG21 Hammer Drill Bit
Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Irwin 42922 Forstner Bit True-Flex PRS3010 Single Featherboard Irwin 42924 Forstner Bit
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Provides a consistent and optimum pressure. Made from a durable plastic composite body. Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses.
Precision Shear PB-010 Forstner Bit Irwin 42926 Forstner Bit Irwin 42928 Forstner Bit
Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses.
Irwin 42930 Forstner Bit Irwin 326023 Rotary Percussion Masonry Drill Bit Precision Shear PB-011 Forstner Bit
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life.
Irwin 42932 Forstner Bit Precision Shear PB-012 Forstner Bit Dewalt DW5249 Percussion Masonry Drill Bit
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 326027 Rotary Percussion Masonry Drill Bit Precision Shear PB-013 Forstner Bit Precision Shear PB-014 Forstner Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life.
Irwin 42934 Forstner Bit Precision Shear PB-015 Forstner Bit Kreg Tool PRS3100 Router Table Switch
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Add safety and convenience to your Precision Router Table with this incredibly handy power switch. Features a 2 plug design which allows it to control two independent devices at once. Key-Lok which eliminates accidental power-on, and a long 8' heavy-duty 14 gauge power cord. 15amp, 120v.
Precision Shear PB-016 Forstner Bit LEG STAND FOR RK7136.2 SAW    DRILL BIT PERCUSN SET 7/8X12IN
Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Leg stand for the RK7136.2 (711.6411) miter saw. 4 easily attached legs allow users to accurately and safely use the miter saw away from the work bench. Legs slide into pockets in the miter saw base and secure with large thumb screws. Leg stand includes rolling material supports that attach to a 2" x 4" (Not Included). The rolling material supports also include material stops for repetitive cuts. Use to power through masonry, concrete, rock, and more with DEWALT Hammer Drill Bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a four flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Two cutter carbide tip maximizes carbide surface contact for longer bit life.
Precision Shear PB-104 Forstner Bit Set GRINDER BENCH 6IN W/LIGHT     Rockwell RK7867 Bench Grinder
Precision shear bits bore smooth, flat bottomed holes. Serrated design produces a unique butting edge for less splintering and chipping. Hardened steel for longer life. Ultra sharp spur insures accurate hole and resists walking on material; 3-1/2" length. Includes (1) each: 1/4",1/2",3/4",and 1". 1/2 hp induction motor for quiet smooth performance. Two flexible gooseneck lights for better illumination. Adjustable tool rests. Eye shields for safety. No load speed: 3.550 rpm. Pre-drilled heavy-duty cast iron base. Wheel size: 6" x 4/5" x 1/2". Shaft diameter: 1/2". Includes (1) 36G wheel, (1) 60G wheel and light bulbs. Net weight: 25 lbs. Adjustable tool rests. No Load Speed 3450/min, magnifying eye shields and spindle lock. Wheel dimensions: 6"x3/4"x1/2" arbor hole grinding wheels, wheel grit left 36#/right 60#; machine weight 29 lbs. Accessories include: (2) Work rest and (2) Abrasive grinding wheels.
CARTRIDGE ACTIVATION 2 SHOT   Dewalt DW756 Bench Grinder MITER SAW STAND UNIV W/WHEELS
Exclusively designed for use with the Bosch GTS1041A REAXX 10 inch jobsite table saw (8916587). The cartridge is part of the saw's Active Response Technology, which imparts a low-voltage electrical signal onto the blade. The signal alters upon contact with the user's skin, triggering a chemical reaction in an activation cylinder similar to the deployment of an airbag in an automobile. In this case, instead of deploying and airbag, the chemical reaction fires a piston that pushes against the drop arm. This action rapidly forces the saw blade down and away from the operator, mitigating serious user injury. Each cartridge allows for two activation s before replacement is needed. Additional onboard cartridge storage is located onboard the tool. After activation, the system can be reset in less than 60 seconds. Each of the dual-activation cartridges has been designed to have a 20 year shelf life and each has an expiration date printed on it. The dual-activation cartridge works with standard 10 inch fine finish and construction-grade blades and stacked dado blades. Includes 1 Dual-Activation Cartridge. The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 3,450 rpm no load speed, 6" wheel diameter, 1/2" spindle diameter, adjustable tool resets, length 15", weight 25.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench. Heavy-duty all steel construction, stand supports up to 400 lbs. Universal design accommodates all brands of miter saws, including 12" sliding miter saws. Quick-release mounting brackets for easy miter saw mounting and removal. Tool-free adjustment of material supports and extension arms. Material supports include rollers and positive stops for repetitive cuts. Weighs 41.8 lbs.
CHOPSAW 14INCH 15AMP 3800RPM  Dewalt DW758 Bench Grinder BASE ROUTER TABLE COMPONENT 3
15 amp, 4 hp, 3,800 rpm motor with replaceable brushes provides power and durability. Quick-release material clamp allows for easy material cutting and removal. Cutting fence with miter adjustment allows up to 45 degree angles to be cut. Spark deflector provides safety and clear line of sight for cutting. Heavy duty steel base provides stability while cutting. Spindle lock for easy blade changes. 8' power cord. Weighs 32 lbs. 120 volts. 1" arbor size. Max Capacity (Round) 4-3/4" x 5-1/3". The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 4.2 amps, 3/4HP, 3,600 rpm no load speed, 8" wheel diameter, 5/8" spindle diameter, adjustable tool resets, length 16", weight 39.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench. This adjustable and durable table is built to last. Comes equipped with levelers to compensate for uneven floors. The stand has predrilled holes that make it easy to mount accessories and to customize the stand. Versatile, system-ready design for all Kreg table top solutions, including the Klamp Table and the Precision Router Table Top. You can also use it to create a custom tool or work stand for your shop. Made from heavy 12 and 16 gauge steel and can be adjusted from 31" to 39: (78.7 cm to 99.1 cm) in height. Includes (4) leveling feet and assembly hardware. Combine with the Router Table Top (5100797) and the Router Table Fence (5823109) to assemble into the PRS1045 Router Table.
CHOP SAW ABRASIVE 14INCH      Rockwell RK7866 Corded Sander Milwaukee 6177-20 Chop Saw
CHOP SAW ABRASIVE 14INCH
Our Price: $151.21
SAW CHOP 15 AMP 14 IN
Our Price: $169.78
This chop saw for metal is a powerful tool to have with the strength and grit to get the job done. Goes from truck to jobsite and back without adding strain to your day. Designed with a large 11" x 18-1/2" base for dependability and stays tough to make jobs easier. The versatile "D" handle gives you comfort and control cut after cut. Portable and lightweight at only 34 lbs. Aluminum work table with dust port, adjustable belt tension, quick sanding belt changing. Specs: disc speed-3450/min, belt speed-1700/SFM, table tilt range-0-45degrees, table size-8-29/32" x 6-5/16", belt table tilt range-0-90 degrees. Includes: 45 degree miter gauge, Allen key, belt sander/disc sander. A quick set-up, quick release locking device holds material being cut securely during the cutting process. Material can be angle cut up to 45 degrees. Arm locks down for easy portability. Applications: fast cutting of drywall track in bundles, angle iron, conduit, pipe, channels, tubing, and rebar. Workpiece capacity: cutting pipe 5" O.D., bar stock 3-5/8", square stock 5". Specs:15 amp motor, 120 volts AC only. No load RPM 3900. 1" arbor. 9" maximum opening. Includes: vise, abrasive wheel and hex wrench.  Rental.
TOP ROUTER TABLE COMPONENT 2  FENCE ROUTER TABLE COMPONENT 1 Hitachi CC14SFS Cut-Off Saws
High performance router table with insert plate. This rugged MDF table top provides a solid, secure routing solution for any workshop. A 1" thick (25mm) MDF core provides a flat, solid top that absorbs vibrations, while steel reinforcing struts prevent sagging; even under the weight of heavy routers and lifts. Durable, high pressure laminate skin offers a low-friction Easy-Slide surface, making it easy to slide work pieces across the surface. Thick edge banding protects the top against bumps and abrasions. Pre-drilled top with holes for Precision Insert-Plate Levelers. Includes (1) Industrial duty Router Table Top, (1) Insert Plate with 3 Level-Lock rings, ring wrench and starting pin, (4) Precision Insert Plate Levelers, (1) Miter Gauge/T-Slot Track, (2) Steel reinforcing struts, and (1) Hardware set and owner's manual. Combine with the Router Table Base (5100789) and the Router Table Fence (5823109) to assemble into the PRS1045 Router Table. This anodized-aluminum fence features a table saw-style T-square adjustment system that ensures the fence will always stay parallel to the miter gauge slot. The fence adjusts easily with just one hand and locks firmly in place with dual locks. A large paddle lock on the in-feed end and a quarter-turn lock on the outfeed end that prevents fence deflection. Combine with the Router Table Top (5100797) and the Router Table Base (5100789) to assemble into the PRS1045 Router Table. Powerful Hitachi motor, soft grip D-handle for easy operation and trigger switch with lock-off button and spark chute (diversion guard) for operators safety. Quick-locking vise for fast clamping. Spindle lock for easy wheel replacements. Double insulation. STANDARD EQUIPMENT: 1 cut-off wheel, 1 hex bar wrench. SPECIFICATIONS: 14" wheel diameter, 1" arbor. Capacity: 65mm (2-9/16") bar dia., 120mm (4-47/64") pipe dia., 130mm x 115mm (5-1/8" x 4-1/2") 235mm x 70mm (9-1/4" x 2-49/64") shape steel (W x H). 2,000W/AC 230V, 2,400/AC240V (15 AMP/AC120V power input (Full-Load Current for USA). 3,800/min no-load speed. 603 x 318 x 603mm. 36 lbs. tool weight.
Dewalt D28710 Chop Saw Dewalt D28715 Chop Saw CHOP SAW DRY CUT 12IN W/DIABLO
Quick-lock vise for fast material clamping. Ergonomically designed "D" handle provides comfortable hand position. Top handle allows saw to be easily moved. 45-degree pivoting fence allows for fast and accurate angle cuts. Spindle lock allows users to make wheel changes fast and easy saving time and money. Chain lock-down allows the head of the saw to be locked in the carrying position. Steel base allows users to weld jigs or stops directly onto the base. STANDARD EQUIPMENT: 14" abrasive wheel and wrench. SPECIFICATIONS: 15 amps, 3.2 H.P. No-load speed 3,800 RPM. 1" Arbor. WORKPIECE CAPACITY: Cutting capacity 4" round and 4" x 7-3/4" rectangular. Powerful 15.0 amp motor provides more overload capacity, increasing performance and durability. Quick-Change Blade Change System increases productivity by providing user ability to change wheels without a wrench. Quick-Fence tool-free, 45-degree adjustable fence for fast, accurate angle cuts and Quick-Lock vise for fast clamping on different size materials. Soft start extends gear and motor life. Ergonomically designed ``D" handle for more comfortable hand position reducing user fatigue. Extra wide solid steel base and heavy-duty lock down pin. Heavy-duty compression spring for smooth movement and greater durability. Spindle lock allows user to make quick wheel changes. Large cutting capacity, 5" round, 4-1/2" x 6-1/2" rectangle. Adjustable spark guard allows user to channel sparks. Easily accessible brushes for convenient servicing on worksite. STANDARD EQUIPMENT: 14" abrasive wheel, blade change wrench, blade bolt, blade washer. SPECIFICATIONS: 15.0 AC Amps, 5.5 HP, 1" arbor, 14" wheel diameter, 5" max. capacity (round), 4-1/2" x 6-1/2" max. capacity (rectangular), 4,000 RPM, spindle lock, quick lock vise. 21" tool length. 39 lb. tool weight. This Dry Cut Saw for metal cutting has a 4-1/2" cutting capacity in a compact frame. Handles big jobs and moves easily from the shop to jobsite. Powerful 15 amp motor and no load 1500 rpm cuts faster and cleaner than a chop saw; no debarring needed. Soft-start for a motor that runs smoother and longer for more cuts. Includes a 12" dry cut saw and a Diablo Cermet-tipped 60-tooth blade. Weighs 38.2 lbs.
Makita LC1230 Cutting Saw Dewalt DW734 Portable Reversible Corded Planer Dewalt DW735 2-Speed Portable Corded Planer
Saw features a large cast aluminum base for stability, externally accessible brushes, "tool-less" guide plate, D-shape handle for easy gripping, shavings collection tray, quick release vise and shaft lock for easy blade changes. Applications; cutting light pipe, angle iron, tubing and conduit. Specs: 1" arbor, max. cutting capacities at 90 degrees 4-1/2", at 45 degrees 3-1/2", 1,300 no load rpm, overall length is 20-1/4", weight 41.9 lbs. Includes: carbide tipped blade, socket wrench and switch button. 4-column carriage lock for reduced snipe. Extra-long in-feed and out-feed tables provide 33-1/2" of material support. 3-knife cutter- head provides 96 cuts per inch. Material removal gauge and thickness scale for accurate cuts. Turret depth stop allows easy return to most frequently used depths. STANDARD EQUIPMENT: Dust hood. SPECIFICATIONS:  15 amp, 120-Volt AC motor, 10,000 RPM, 1/8" max depth of cut, 6" depth capacity. Feeds 26' per minute. 80 lb. weight. Automatic carriage lock for reduction of movement that causes snipe without need for manual engagement by user. 2-speed gear box allows user to change feed speed to optimize cuts per inch at 96 or 79 CPI. Fan assisted chip ejection vacuums chips off the cutter-head and exhausts them out of the machine. Material removal gauge and extra-large thickness scale for accurate cuts. Extra-large turret depth stop. STANDARD EQUIPMENT: Dust hose adapter, dust ejection chute. SPECIFICATIONS:  15- amp, 120-Volt AC motor, 10,000 RPM, 1/8" Max depth of cut 1/8", 6" depth/13" width capacity 6". Width capacity 13". Feeds 14' or 26' feet per minute.
   
 
1