Home > POWER TOOLS & ACC > POWER TOOLS > STATIONARY POWER TOOL ACC
Choose a sub category:
MOTOR ARBORS & MANDRELS POWER MITER BOX ACCESS STATIONARY TOOL ACCESS
STATIONARY TOOL STANDS
Sort By:
1
Irwin 61108 Economy Light Duty Rotary Masonry Drill Bit Irwin 61112 Economy Light Duty Rotary Masonry Drill Bit Irwin 5026000 Rotary Percussion Masonry Drill Bit
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Irwin 5026001 Rotary Percussion Masonry Drill Bit Irwin 61116 Economy Light Duty Rotary Masonry Drill Bit Irwin 5026002 Rotary Percussion Masonry Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Dewalt DW5224 Percussion Masonry Drill Bit Dewalt DW5221 Percussion Masonry Drill Bit BIT MASONRY PERCUSSION 1/8X3IN
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
Irwin 5026003 Rotary Percussion Masonry Drill Bit BIT MASONRY 5/32X4.5IN        Dewalt DW5222 Percussion Masonry Drill Bit
BIT MASONRY 5/32X4.5IN
Our Price: $3.23
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 61120 Economy Light Duty Rotary Masonry Drill Bit Dewalt DW5225 Percussion Masonry Drill Bit Western States 80240 Masonry Drill Bit
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile.
BIT MASONRY PERCSN 3/16X3/8IN Dewalt DW5223 Percussion Masonry Drill Bit Dewalt DW5227 Percussion Masonry Drill Bit
Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Western States 80241 Masonry Drill Bit Dewalt DW5228 Percussion Masonry Drill Bit Secure-Grip 48-20-8810 Hammer Drill Bit
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Western States 80242 Masonry Drill Bit BIT MASONRY PERCUSSION 1/4X4IN Western States 80244 Masonry Drill Bit
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile.
Secure-Grip 48-20-8811 Hammer Drill Bit Western States 80243 Masonry Drill Bit Irwin 5026006 Rotary Percussion Masonry Drill Bit
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
BIT MASONRY PERCUSSION 1/4X6IN Western States 80245 Masonry Drill Bit Bluegranite HCBG01 Hammer Drill Bit
Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Bluegranite HCBG02 Hammer Drill Bit Bluegranite HCBG03T/HCBG03 Hammer Drill Bit Bluegranite HCBG04 Hammer Drill Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Bluegranite HCBG06 Hammer Drill Bit Irwin 61124 Economy Light Duty Rotary Masonry Drill Bit BIT MASONRY PRCUSSION 5/16X6IN
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
Tapcon 11256 Masonry Drill Bit Irwin 326000 Rotary Percussion Masonry Drill Bit Irwin 326005 Rotary Percussion Masonry Drill Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Irwin 326001 Rotary Percussion Masonry Drill Bit Irwin 326002 Rotary Percussion Masonry Drill Bit Irwin 326008 Rotary Percussion Masonry Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Irwin 326003 Rotary Percussion Masonry Drill Bit Tapcon 11257 Masonry Drill Bit Tapcon 11247 Masonry Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.
Irwin 326006 Rotary Percussion Masonry Drill Bit Secure-Grip 48-20-8816 Hammer Drill Bit Dewalt DW5230 Percussion Masonry Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
BIT MASONRY PERCUSSION 3/8X6IN Irwin 5026009 Rotary Percussion Masonry Drill Bit Irwin 61128 Economy Light Duty Rotary Masonry Drill Bit
Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
Bluegranite HCBG09 Hammer Drill Bit Irwin 326009 Rotary Percussion Masonry Drill Bit Tapcon 11363 Masonry Drill Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.
Tapcon 11248 Masonry Drill Bit Tapcon 11362 Masonry Drill Bit Speedbor Max 3041015 Wood Boring Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks.
Secure-Grip 48-20-8821 Hammer Drill Bit BIT MASONRY PERCUSSION 1/2X6IN Irwin 61132 Economy Light Duty Rotary Masonry Drill Bit
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
Irwin 50128 Percussion Masonry Drill Bit Irwin 326011 Rotary Percussion Masonry Drill Bit Bluegranite HCBG12 Hammer Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Speedbor Max 3041001 Wood Boring Bit Secure-Grip 48-20-8800 Hammer Drill Bit Dewalt DW5234 Percussion Masonry Drill Bit
Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Artu 1006 1-Piece Concrete Screw Drill Bit Secure-Grip 48-20-8801 Hammer Drill Bit Speedbor Max 3041014 Wood Boring Bit
Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks.
Secure-Grip 48-20-8805 Hammer Drill Bit Artu 1014 1-Piece Concrete Screw Drill Bit Cobra 582U Masonry Drill Bit
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Used in applications such as drilling in brick, cinder block and tile.
Dewalt DW5235 Percussion Masonry Drill Bit Speedbor Max 3041002 Wood Boring Bit Secure-Grip 48-20-8806 Hammer Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Irwin 42906 Forstner Bit Irwin 42904 Forstner Bit Speedbor Max 3041016 Wood Boring Bit
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks.
Artu 1011 1-Piece Concrete Screw Drill Bit BIT AUGER 3/8IN               CDCO 606-5/8 Grinding Attachment
BIT AUGER 3/8IN
Our Price: $8.35
Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material. For grinding or buffing. Right hand thread only.
CDCO 606-1/2 Grinding Attachment Irwin 5026015 Rotary Percussion Masonry Drill Bit Speedbor Max 3041004 Wood Boring Bit
For grinding or buffing. Right hand thread only. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks.
Speed Feed 48-13-0048 Self-Feed Wood Bit Artu 1021 1-Piece Concrete Screw Drill Bit Speedbor Max 3041017 Wood Boring Bit
Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks.
Speedbor Max 3041005 Wood Boring Bit Artu 1023 1-Piece Concrete Screw Drill Bit BIT AUGER 5/8IN
BIT AUGER 5/8IN
Our Price: $9.14
Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
Cobra 589U Masonry Drill Bit Irwin 42908 Forstner Bit Speedbor Max 3041007 Wood Boring Bit
Used in applications such as drilling in brick, cinder block and tile. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks.
Irwin 42936 Forstner Bit Extension Bluegranite HCBG15 Hammer Drill Bit Speed Feed 48-13-0058 Self-Feed Wood Bit
For use with 3/8" shank bits. Includes hex key. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions.
Speedbor Max 3041018 Wood Boring Bit Artu 1031 1-Piece Concrete Screw Drill Bit Secure-Grip 48-20-8830 Hammer Drill Bit
Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Irwin 326015 Rotary Percussion Masonry Drill Bit BIT AUGER 1/2IN               Precision Shear PB-001 Forstner Bit
BIT AUGER 1/2IN
Our Price: $10.13
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life.
Precision Shear PB-002 Forstner Bit Bluegranite HCBG16 Hammer Drill Bit Drill Doctor WSSA0002012 Replacement Abrasive Belt Kit
Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. For use with Work Sharp Knife & Tool Sharpener only, Orgill SKU# 775.2801. Includes two each: P80 coarse grit belts, P220 medium grit belt, and 6000 fine grit belts.
Irwin 5026019 Rotary Percussion Masonry Drill Bit Speed Feed 48-13-0068 Self-Feed Wood Bit Artu 1041 1-Piece Concrete Screw Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards.
Irwin 42910 Forstner Bit Power Drill I-100 49904 Dual Auger Bit Power Drill I-100 49905 Dual Auger Bit
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Speedbor Max 3041009 Wood Boring Bit Power Drill I-100 49906 Dual Auger Bit Power Drill I-100 49907 Dual Auger Bit
Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Power Drill I-100 49908 Dual Auger Bit Power Drill I-100 49909 Dual Auger Bit Power Drill I-100 49910 Dual Auger Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Speedbor Max 3041019 Wood Boring Bit Dewalt DW5241 Percussion Masonry Drill Bit Drill Doctor WSSA0002703C Replacement Abrasive Belt Kit
Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with: (6) P80 Coarse grit belts for tool grinding and sharpening.
Drill Doctor WSSA0002704C Replacement Abrasive Belt Kit Drill Doctor WSSA0002705C Replacement Abrasive Belt Kit Speed Feed 48-13-0078 Self-Feed Wood Bit
Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with (6) P220 Medium grit belts. Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with (6) 6000 Fine grit belts. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions.
Power Drill I-100 49911 Dual Auger Bit Irwin 42914 Forstner Bit Power Drill I-100 49912 Dual Auger Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Irwin 42912 Forstner Bit Precision Shear PB-003 Forstner Bit Cobra 589Z Masonry Drill Bit
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Used in applications such as drilling in brick, cinder block and tile.
Speedbor Max 3041020 Wood Boring Bit Speed Feed 48-13-0088 Self-Feed Wood Bit BIT HAMMER DRILL 5/8X4X6IN
Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications.
Irwin 326019 Rotary Percussion Masonry Drill Bit Cobra 587Z Masonry Drill Bit BIT HAMMER DRILL 3/4X4X6IN
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Used in applications such as drilling in brick, cinder block and tile. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications.
BIT AUGER HEX SHANK WOOD 3/4IN Power Drill I-100 49913 Dual Auger Bit Speedbor Max 3041021 Wood Boring Bit
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks.
Precision Shear PB-004 Forstner Bit Bluegranite HCBG20 Hammer Drill Bit Irwin 42916 Forstner Bit
Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses.
Power Drill I-100 49914 Dual Auger Bit Precision Shear PB-005 Forstner Bit Speed Feed 48-13-0108 Self-Feed Wood Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions.
Power Drill I-100 49915 Dual Auger Bit Irwin 42918 Forstner Bit Power Drill I-100 49916 Dual Auger Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Irwin 5026021 Rotary Percussion Masonry Drill Bit Cobra 584Z Masonry Drill Bit Precision Shear PB-006 Forstner Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Used in applications such as drilling in brick, cinder block and tile. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life.
Irwin 42920 Forstner Bit Tapcon 11249 Masonry Drill Bit Dewalt DW5244 Percussion Masonry Drill Bit
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
BIT AUGER 1IN                 Precision Shear PB-008 Forstner Bit Tapcon 11250 Masonry Drill Bit
BIT AUGER 1IN
Our Price: $16.50
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.
DRILL BIT HAMMER 5/32X3X6IN   Speedbor Max 3041003 Drill Bit Set Dewalt DW7053 Dust Bag
Robust head for longer life. Various useable lengths. Milled u-flutes with deep cut-spiral for fast dust removal. Diamond ground carbide tip for precise starts to avoid scratching and skating in tile and hard stone. PowerGrip shank for aggressive gripping power. Shank diameter 0.1562; Diameter 5/32"; Flute length 3.0"; Overall length 6.0". Tri-Flute design for faster chip ejection; cutting spurs have 3 cutting edges for added durability. Full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck. Fits all standard 1/4" quick change chucks. Includes (1) each: 5/8", 3/4", 1" and case. Universal dust bag fits all Dewalt miter saws.
DRILL BIT HAMMER 3/16X4X6IN   Precision Shear PB-007 Forstner Bit Precision Shear PB-009 Forstner Bit
Robust head provides longer life. Steel teeth that extend from the shank are designed to catch between the jaws of power tool chucks. Bit is easy to chuck in the tool and won't slip. Various useable lengths. Milled u-flutes with deep-cut spiral for fast dust removal. Diamond ground carbide tip for precise starts in tile and hard stone. PowerGrip shank for aggressive gripping power. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life.
DRILL BIT HAMMER 1/4X4X6IN    Irwin 42922 Forstner Bit Bluegranite HCBG22 Hammer Drill Bit
PowerGrip shank for aggressive gripping power. Steel teeth extend from the shank to catch between the jaws of power tool chucks. Easy to chuck in the tool and won't slip. The tip of the BlueGranite turbo bit is Bosch carbide, diamond ground for precise starts to avoid scratching and skating in tile and hard stone. Robust head provides longer life. Various usable lengths. Milled u-flutes with deep-cut spiral for fast dust removal. Diamond ground carbide tip for precise starts in tile and hard stone. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Power Drill I-100 49918 Dual Auger Bit Darex/Drill Doctor DA313020GF Drill Replacement Parts Dewalt DW1665 Power Ship Auger Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Replaces sharpening wheel of 3/32" to 1/2" drill bits for Drill Doctor. Fits all GenX model drill bit sharpeners. 3 layers of nickel/diamond plating to provide long life; lasts for 200 or more sharpenings. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes.
Irwin 326022 Rotary Percussion Masonry Drill Bit True-Flex PRS3010 Single Featherboard Irwin 5026023 Rotary Percussion Masonry Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Provides a consistent and optimum pressure. Made from a durable plastic composite body. Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Bluegranite HCBG24 Hammer Drill Bit Irwin 42924 Forstner Bit Precision Shear PB-010 Forstner Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life.
Dewalt DW1667 Power Ship Auger Bit Irwin 42926 Forstner Bit Irwin 326024 Rotary Percussion Masonry Drill Bit
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Bit is shot peened, double tempered finish reduces breakage and chrome vanadiam spring steel shaft. The round shank fits all hammer drills with 3 jaw chuck; 1/2 inch shank.
WeldTec 3043004 Power Ship Auger Bit WeldTec 4935570 Power Ship Auger Bit WeldTec 3043005 Power Ship Auger Bit
Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank
Irwin 42928 Forstner Bit Dewalt DW1669 Power Ship Auger Bit Dewalt DW1671 Power Ship Auger Bit
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes.
Bluegranite HCBG26 Hammer Drill Bit Irwin 42930 Forstner Bit AUGER BIT 1/2IN X 17IN
AUGER BIT 1/2IN X 17IN
Our Price: $24.90
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal.
WeldTec 3043006 Power Ship Auger Bit WeldTec 3043007 Power Ship Auger Bit Irwin 326026 Rotary Percussion Masonry Drill Bit
Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Bit is shot peened, double tempered finish reduces breakage and chrome vanadiam spring steel shaft. The round shank fits all hammer drills with 3 jaw chuck; 1/2 inch shank.
Kreg KMS7215  Band Saw/Router Table Adjuster Dewalt DW1673 Power Ship Auger Bit Precision Shear PB-011 Forstner Bit
Time-saving and accurate saw fence micro-adjuster. Allows you to dial-in precise adjustments easily with one hand to your Kreg Precision router table or Precision band saw down to .005". Easy to grip ribbed dial. Black plastic fixing knob. Dimensions: 7" x 2" x 5". Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life.
Irwin 42932 Forstner Bit AUGER BIT 5/8IN X 17IN        Dewalt DW1680 Power Ship Auger Bit
AUGER BIT 5/8IN X 17IN
Our Price: $26.73
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses. Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes.
Dewalt DW1681 Power Ship Auger Bit Speedbor MAX Speed Clam Drill Bit Set Precision Shear PB-012 Forstner Bit
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Tri-flute design for faster chip ejection. Cutting spurs have 3 cutting edges for added durability. Full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension. Fits all standard 1/4" quick change chucks. Comes with a heavy-duty case. Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life.
WeldTec 3043008 Power Ship Auger Bit Milwaukee 48-13-0400 Speed Feed Wood Bit Set WeldTec 3043009 Power Ship Auger Bit
Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank 6-1/2" speed feed wood bit set. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Set includes: (1) 1" spur auger bit, (1) 1/2" spur auger bit, (1) 3/4" spur auger bit and (1) 5/8" spur auger bit. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank
Precision Shear PB-013 Forstner Bit AUGER BIT 3/4IN X 17IN        BIT AUGER 9/16X18IN
AUGER BIT 3/4IN X 17IN
Our Price: $29.93
BIT AUGER 9/16X18IN
Our Price: $29.95
Razor sharp serrated edge for fast and flawless cutting, 3-1/2", hardened steel body for longer life, ultra sharp spur to ensure an accurate starting hole, steep angled cutting edge to produce chisel-like curls, forged construction for extended life. Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal. Drills through up to 2 times the nails of competitive auger bits without needing re-sharpening. Drill into clean or nail embedded wood with confidence when installing Romex wire, Pex water lines, rebar, bolts and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. Durable hardened, one-face 20? rake angle design enhances nail resistance, chip removal and fast, easy sharpening. Fast chip removal: non-stick, polished and coated flutes eliminate costly cleaning time. Impact-rated shank is strong enough to use with an impact wrench.
Dewalt DW1682 Power Ship Auger Bit