Home > POWER TOOLS & ACC > POWER TOOLS > BENCH & STATIONARY > PLANERS
Sort By:
1
Speedbor Max 3041015 Wood Boring Bit Speedbor Max 3041001 Wood Boring Bit Speedbor Max 3041014 Wood Boring Bit
Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks.
CDCO 606-5/8 Grinding Attachment CDCO 606-1/2 Grinding Attachment Speedbor Max 3041002 Wood Boring Bit
For grinding or buffing. Right hand thread only. For grinding or buffing. Right hand thread only. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks.
Speedbor Max 3041016 Wood Boring Bit BIT AUGER 3/8IN               Speedbor Max 3041004 Wood Boring Bit
BIT AUGER 3/8IN
Our Price: $8.35
Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks.
Speed Feed 48-13-0048 Self-Feed Wood Bit Speedbor Max 3041017 Wood Boring Bit Speedbor Max 3041005 Wood Boring Bit
Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks.
BIT AUGER 5/8IN               Speedbor Max 3041007 Wood Boring Bit Speed Feed 48-13-0058 Self-Feed Wood Bit
BIT AUGER 5/8IN
Our Price: $9.14
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions.
Speedbor Max 3041018 Wood Boring Bit BIT AUGER 1/2IN               Speed Feed 48-13-0068 Self-Feed Wood Bit
BIT AUGER 1/2IN
Our Price: $10.13
Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions.
Power Drill I-100 49904 Dual Auger Bit Power Drill I-100 49905 Dual Auger Bit Speedbor Max 3041009 Wood Boring Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks.
Power Drill I-100 49906 Dual Auger Bit Power Drill I-100 49907 Dual Auger Bit Power Drill I-100 49908 Dual Auger Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Power Drill I-100 49909 Dual Auger Bit Power Drill I-100 49910 Dual Auger Bit Speedbor Max 3041019 Wood Boring Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks.
Speed Feed 48-13-0078 Self-Feed Wood Bit Power Drill I-100 49911 Dual Auger Bit Power Drill I-100 49912 Dual Auger Bit
Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Speedbor Max 3041020 Wood Boring Bit Speed Feed 48-13-0088 Self-Feed Wood Bit BIT AUGER HEX SHANK WOOD 3/4IN
Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
Power Drill I-100 49913 Dual Auger Bit Speedbor Max 3041021 Wood Boring Bit Power Drill I-100 49914 Dual Auger Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Speed Feed 48-13-0108 Self-Feed Wood Bit Power Drill I-100 49915 Dual Auger Bit Power Drill I-100 49916 Dual Auger Bit
Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
BIT AUGER 1IN                 Dewalt DW2571 Rotary Drill Bit Set Speedbor Max 3041003 Drill Bit Set
BIT AUGER 1IN
Our Price: $16.50
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material. Carbide tipped for applications such as drilling in brick, block and concrete, rapid load quick change; universal 1/4" hex shank prevents slipping. Includes (1) one each: 5/32", 3/16", and 1/4" bits. Tri-Flute design for faster chip ejection; cutting spurs have 3 cutting edges for added durability. Full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck. Fits all standard 1/4" quick change chucks. Includes (1) each: 5/8", 3/4", 1" and case.
Power Drill I-100 49918 Dual Auger Bit Dewalt DW1665 Power Ship Auger Bit Dewalt DW1667 Power Ship Auger Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes.
Irwin 1881078 1-Piece Impact Drill Bit Set WeldTec 3043004 Power Ship Auger Bit WeldTec 4935570 Power Ship Auger Bit
Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One-piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank
WeldTec 3043005 Power Ship Auger Bit Dewalt DW1669 Power Ship Auger Bit Dewalt DW1671 Power Ship Auger Bit
Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes.
AUGER BIT 1/2IN X 17IN        WeldTec 3043006 Power Ship Auger Bit WeldTec 3043007 Power Ship Auger Bit
AUGER BIT 1/2IN X 17IN
Our Price: $24.90
Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank
Dewalt DW1673 Power Ship Auger Bit AUGER BIT 5/8IN X 17IN        Dewalt DW1680 Power Ship Auger Bit
AUGER BIT 5/8IN X 17IN
Our Price: $26.73
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes.
Dewalt DW1681 Power Ship Auger Bit Speedbor MAX Speed Clam Drill Bit Set WeldTec 3043008 Power Ship Auger Bit
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Tri-flute design for faster chip ejection. Cutting spurs have 3 cutting edges for added durability. Full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension. Fits all standard 1/4" quick change chucks. Comes with a heavy-duty case. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank
Milwaukee 48-13-0400 Speed Feed Wood Bit Set WeldTec 3043009 Power Ship Auger Bit AUGER BIT 3/4IN X 17IN
AUGER BIT 3/4IN X 17IN
Our Price: $29.93
6-1/2" speed feed wood bit set. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Set includes: (1) 1" spur auger bit, (1) 1/2" spur auger bit, (1) 3/4" spur auger bit and (1) 5/8" spur auger bit. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal.
BIT AUGER 9/16X18IN           Dewalt DW1682 Power Ship Auger Bit WeldTec 3043010 Power Ship Auger Bit
BIT AUGER 9/16X18IN
Our Price: $29.95
Drills through up to 2 times the nails of competitive auger bits without needing re-sharpening. Drill into clean or nail embedded wood with confidence when installing Romex wire, Pex water lines, rebar, bolts and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. Durable hardened, one-face 20? rake angle design enhances nail resistance, chip removal and fast, easy sharpening. Fast chip removal: non-stick, polished and coated flutes eliminate costly cleaning time. Impact-rated shank is strong enough to use with an impact wrench. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank
Dewalt DW1683 Power Ship Auger Bit Dewalt DW1674 Power Ship Auger Bit WeldTec 3043011 Power Ship Auger Bit
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank
Speedbor Max 3041006 Drill Bit Set AUGER BIT 7/8IN X 17IN        Dewalt DW1685 Power Ship Auger Bit
AUGER BIT 7/8IN X 17IN
Our Price: $33.36
Tri-Flute design for faster chip ejection; cutting spurs have 3 cutting edges for added durability. Full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck. Fits all standard 1/4" quick change chucks. Includes (1) each: 1/2", 5/8", 3/4", 7/8", 1" and 1-1/4". Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes.
Milwaukee 48-13-5750 Ship Auger Bit WeldTec 3043013 Power Ship Auger Bit BIT AUGER 7/8X18IN
BIT AUGER 7/8X18IN
Our Price: $34.97
7/16" hex shank wood boring bits. 15" flute. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Drills through up to 2 times the nails of competitive auger bits without needing re-sharpening. Drill into clean or nail embedded wood with confidence when installing Romex wire, Pex water lines, rebar, bolts and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. Durable hardened, one-face 20? rake angle design enhances nail resistance, chip removal and fast, easy sharpening. Fast chip removal: non-stick, polished and coated flutes eliminate costly cleaning time. Impact-rated shank is strong enough to use with an impact wrench.
Dewalt DW1686 Power Ship Auger Bit Irwin 44801 Drill Press Adjustable Wood Bit AUGER BIT 1IN X 17IN
AUGER BIT 1IN X 17IN
Our Price: $35.85
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Adjustable cutting blade bores a variety of hole sizes. Cuts 19 size holes in increments of 1/8". Lockhead screw securely holds blade at desired boring diameter. Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal.
Dewalt DW1687 Power Ship Auger Bit Milwaukee 48-13-6000 Ship Auger Bit BIT AUGER 18X15/16IN
BIT AUGER 18X15/16IN
Our Price: $40.26
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. 7/16" hex shank wood boring bits. 15" flute. Drills through up to 2 times the nails of competitive auger bits without needing re-sharpening. Drill into clean or nail embedded wood with confidence when installing Romex wire, Pex water lines, rebar, bolts and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. Durable hardened, one-face 20? rake angle design enhances nail resistance, chip removal and fast, easy sharpening. Fast chip removal: non-stick, polished and coated flutes eliminate costly cleaning time. Impact-rated shank is strong enough to use with an impact wrench.
WeldTec 4935572 Power Ship Auger Bit WeldTec 3043014 Power Ship Auger Bit AUGER BIT 1-1/8IN X 17IN
AUGER BIT 1-1/8IN X 17IN
Our Price: $41.60
Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal.
Dewalt DW1676 Power Ship Auger Bit WeldTec 3043015 Power Ship Auger Bit Irwin 45002 Drill Press Adjustable Wood Bit
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Adjustable cutting blade bores a variety of hole sizes. Cuts 19 size holes in increments of 1/8". Lockhead screw securely holds blade at desired boring diameter.
Dewalt DW1690 Power Ship Auger Bit BIT AUGER 1-1/8X18IN          GRINDER BENCH 6IN W/LIGHT
BIT AUGER 1-1/8X18IN
Our Price: $53.35
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Drills through up to 2 times the nails of competitive auger bits without needing re-sharpening. Drill into clean or nail embedded wood with confidence when installing Romex wire, Pex water lines, rebar, bolts and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. Durable hardened, one-face 20? rake angle design enhances nail resistance, chip removal and fast, easy sharpening. Fast chip removal: non-stick, polished and coated flutes eliminate costly cleaning time. Impact-rated shank is strong enough to use with an impact wrench. 1/2 hp induction motor for quiet smooth performance. Two flexible gooseneck lights for better illumination. Adjustable tool rests. Eye shields for safety. No load speed: 3.550 rpm. Pre-drilled heavy-duty cast iron base. Wheel size: 6" x 4/5" x 1/2". Shaft diameter: 1/2". Includes (1) 36G wheel, (1) 60G wheel and light bulbs. Net weight: 25 lbs.
Rockwell RK7867 Bench Grinder Dewalt DW1692 Power Ship Auger Bit BIT AUGER 1-1/4X18IN
BIT AUGER 1-1/4X18IN
Our Price: $61.33
Adjustable tool rests. No Load Speed 3450/min, magnifying eye shields and spindle lock. Wheel dimensions: 6"x3/4"x1/2" arbor hole grinding wheels, wheel grit left 36#/right 60#; machine weight 29 lbs. Accessories include: (2) Work rest and (2) Abrasive grinding wheels. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Drills through up to 2 times the nails of competitive auger bits without needing re-sharpening. Drill into clean or nail embedded wood with confidence when installing Romex wire, Pex water lines, rebar, bolts and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. Durable hardened, one-face 20? rake angle design enhances nail resistance, chip removal and fast, easy sharpening. Fast chip removal: non-stick, polished and coated flutes eliminate costly cleaning time. Impact-rated shank is strong enough to use with an impact wrench.
Milwaukee 48-13-6370 Ship Auger Bit Dewalt DW756 Bench Grinder CHOPSAW 14INCH 15AMP 3800RPM
7/16" hex shank wood boring bits. 15" flute. The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 3,450 rpm no load speed, 6" wheel diameter, 1/2" spindle diameter, adjustable tool resets, length 15", weight 25.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench. 15 amp, 4 hp, 3,800 rpm motor with replaceable brushes provides power and durability. Quick-release material clamp allows for easy material cutting and removal. Cutting fence with miter adjustment allows up to 45 degree angles to be cut. Spark deflector provides safety and clear line of sight for cutting. Heavy duty steel base provides stability while cutting. Spindle lock for easy blade changes. 8' power cord. Weighs 32 lbs. 120 volts. 1" arbor size. Max Capacity (Round) 4-3/4" x 5-1/3".
MK Diamond 158252 Bench Top Corded Tile Saw M-D 48190 Portable Corded Tile Saw Dewalt DW758 Bench Grinder
Light weight and compact saw with detachable table stop that prevents saw from moving away from operator when pushing material into blade, rips ceramic and stone tiles up to 12", immersion blade cooling system requires no pump, built in 45 degree miter table, easy alignment rip guide, 45 degree rip guide, safeswitch prevents saw from being operated when locking key is removed. Specs: 120V, 5,500 RPM, blade capacity  4-1/2", depth of cut (4-1/2" blade) 1", weight 12 lbs., 18"Lx16"Wx7"H, UL approved. Includes: internal cord storage, 4-1/2" wet diamond blade included, rip guide, 45 degree rip guide, table stop. For cutting a variety of ceramic, porcelain, and stone tile, diamond coated edge to cut through hard material, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, carrying handle, tilting table allows for miter cuts. Adjustable rip guide. Specs: : Motor: 3/4 HP, 3.5 AMPS. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 13" x 14-3/4". Weight: 20lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-3/8".  Use replacement blade 5542840 The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 4.2 amps, 3/4HP, 3,600 rpm no load speed, 8" wheel diameter, 5/8" spindle diameter, adjustable tool resets, length 16", weight 39.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench.
Milwaukee 6177-20 Chop Saw Hitachi CC14SFS Cut-Off Saws Rockwell RK7033 Drill Press
SAW CHOP 15 AMP 14 IN
Our Price: $183.36
A quick set-up, quick release locking device holds material being cut securely during the cutting process. Material can be angle cut up to 45 degrees. Arm locks down for easy portability. Applications: fast cutting of drywall track in bundles, angle iron, conduit, pipe, channels, tubing, and rebar. Workpiece capacity: cutting pipe 5" O.D., bar stock 3-5/8", square stock 5". Specs:15 amp motor, 120 volts AC only. No load RPM 3900. 1" arbor. 9" maximum opening. Includes: vise, abrasive wheel and hex wrench.  Rental. Powerful Hitachi motor, soft grip D-handle for easy operation and trigger switch with lock-off button and spark chute (diversion guard) for operators safety. Quick-locking vise for fast clamping. Spindle lock for easy wheel replacements. Double insulation. STANDARD EQUIPMENT: 1 cut-off wheel, 1 hex bar wrench. SPECIFICATIONS: 14" wheel diameter, 1" arbor. Capacity: 65mm (2-9/16") bar dia., 120mm (4-47/64") pipe dia., 130mm x 115mm (5-1/8" x 4-1/2") 235mm x 70mm (9-1/4" x 2-49/64") shape steel (W x H). 2,000W/AC 230V, 2,400/AC240V (15 AMP/AC120V power input (Full-Load Current for USA). 3,800/min no-load speed. 603 x 318 x 603mm. 36 lbs. tool weight. 2/3 HP induction motor for dependable performance. 5-speed setting for best results in metal, wood or plastic. Rack and pinion table height adjustment. 2" spindle travel; 1/2" chuck. Table bevels 0 to 45 degrees left and right. Keyed safety switch prevents accidental starting. Includes 1 chuck key and 1 allen key. Weighs 55.5 lbs.
Dewalt D28710 Chop Saw MK Diamond 157222 Table Corded Tile Saw Dewalt D28715 Chop Saw
Quick-lock vise for fast material clamping. Ergonomically designed "D" handle provides comfortable hand position. Top handle allows saw to be easily moved. 45-degree pivoting fence allows for fast and accurate angle cuts. Spindle lock allows users to make wheel changes fast and easy saving time and money. Chain lock-down allows the head of the saw to be locked in the carrying position. Steel base allows users to weld jigs or stops directly onto the base. STANDARD EQUIPMENT: 14" abrasive wheel and wrench. SPECIFICATIONS: 15 amps, 3.2 H.P. No-load speed 3,800 RPM. 1" Arbor. WORKPIECE CAPACITY: Cutting capacity 4" round and 4" x 7-3/4" rectangular. Versatile and compact tabletop tile with high torque universal motor, high impact thermoplastic water reservoir, safeswitch prevents saw from being operated when locking key is removed. Specs: 120V, 5,500 RPM, blade capacity 7", arbor size 5/8", length of cut 12", depth of cut 2", LxWxH 17" x 14" x 12", weight 15 lbs. Includes: 7" wet cutting diamond blade, water pump, rip guide. Powerful 15.0 amp motor provides more overload capacity, increasing performance and durability. Quick-Change Blade Change System increases productivity by providing user ability to change wheels without a wrench. Quick-Fence tool-free, 45-degree adjustable fence for fast, accurate angle cuts and Quick-Lock vise for fast clamping on different size materials. Soft start extends gear and motor life. Ergonomically designed ``D" handle for more comfortable hand position reducing user fatigue. Extra wide solid steel base and heavy-duty lock down pin. Heavy-duty compression spring for smooth movement and greater durability. Spindle lock allows user to make quick wheel changes. Large cutting capacity, 5" round, 4-1/2" x 6-1/2" rectangle. Adjustable spark guard allows user to channel sparks. Easily accessible brushes for convenient servicing on worksite. STANDARD EQUIPMENT: 14" abrasive wheel, blade change wrench, blade bolt, blade washer. SPECIFICATIONS: 15.0 AC Amps, 5.5 HP, 1" arbor, 14" wheel diameter, 5" max. capacity (round), 4-1/2" x 6-1/2" max. capacity (rectangular), 4,000 RPM, spindle lock, quick lock vise. 21" tool length. 39 lb. tool weight.
M-D Building 48191 M-D Fusion Wet Tile Saws MK Diamond 160028 Corded Tile Saw QEP 83200 Corded Bridge Saw
For cutting a variety of ceramic, porcelain, and stone tile, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, large carrying handles, tilting table allows for miter cuts. Heavy-duty cast aluminum cutting table, drain plug makes for easy water change, adjustable rip guide mounts securely. Secs: Motor: 1 HP, 6.25 Amps. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 18" x 22". Weight: 33lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-1/16".  Use replacement blade 554.2840 Wet cutting tile saw. High torque, universal motor. Runs on standard house current and draws only 5 amps at 120 volts. Engineered for cutting ceramic, travertine and slate. MK Safe-switch prevents saw from being operated when locking key is removed. Chrome guide-bar and linear bearing assembly ensures accurate tracking and alignment. Single piece zinc-plated steel frame for rigidity, strength and durability. Hinged blade guard for easy blade changes. Fully submersible, thermally protected water pump. High impact removable thermoplastic water reservoir will not rust or bend out shape. 7" blade capacity. Includes 7" diamond blade, water pump, wrenches and rip guide. Depth of cut 2"; length of cut 18"; diagonally cuts 13" tile. Dimensions of saw: 33"L x 18-1/2"W x 12-5/8"H. Use to cut marble, granite, porcelain, stone and tile. Dual internal water delivery system for maximum dispersion. Adjustable pivoting rail allows easy angle positioning from 90? to 45?. Angle/rip guide for consistent cuts. Automatic thermal overload protection prevents saw from overheating. Child-proof, locking on/off switch and key for safety. Power cords are encapsulated in a protective tube and attached to a flexible rod; keeps the cutting table safe and clear. Specs: motor: 1 HP, 120V-60Hz/9.5 Amps, 1100 watts, rpm: 3420 rpm, 8" blade capacity, 5/8" arbor, rip cuts 24" tile, diagonal cut on 18" tile, depth of cut: 1-3/8", dimensions: 37" L x 18" W x 47-1/2" H (w/legs), weight 82.32 lbs ( w/legs). Includes: transport handle and fold-out stand with wheels, 8" porcelain rated continuous rim wet diamond blade, high volume water pump and angle/rip cutting guide.
CHOP SAW DRY CUT 12IN W/DIABLO MK Diamond 159943 Corded Tile Saw Makita LC1230 Cutting Saw
This Dry Cut Saw for metal cutting has a 4-1/2" cutting capacity in a compact frame. Handles big jobs and moves easily from the shop to jobsite. Powerful 15 amp motor and no load 1500 rpm cuts faster and cleaner than a chop saw; no debarring needed. Soft-start for a motor that runs smoother and longer for more cuts. Includes a 12" dry cut saw and a Diablo Cermet-tipped 60-tooth blade. Weighs 38.2 lbs. The powerful 7.4 amp, high-torque motor has maintenance-free, self-lubricating pinion and gear-box assembly. Tilting head allows for precise 45 degree miter cuts and variable height cutting head allows for plunge cutting. Sliding aluminum die-cast cutting table rips 18" tile and diagonally cuts 13" tiles. Linear bearing and chrome plated guide-bar assembly ensure precise cutting. The frame is single piece zinc-plated steel for rigidity, strength and durability. Hinged blade guard allows for easy blade changes. Motor incorporates the heavy duty on/off MK-Safeswitch and a built-in water pump receptacle. Removable thermoplastic water reservoir, 7" diamond blade, submersible water pump and rip guide are all included. Weight 33 pounds. Dimensions: 33" long x 19" wide x 20" high. CSA approved. Saw features a large cast aluminum base for stability, externally accessible brushes, "tool-less" guide plate, D-shape handle for easy gripping, shavings collection tray, quick release vise and shaft lock for easy blade changes. Applications; cutting light pipe, angle iron, tubing and conduit. Specs: 1" arbor, max. cutting capacities at 90 degrees 4-1/2", at 45 degrees 3-1/2", 1,300 no load rpm, overall length is 20-1/4", weight 41.9 lbs. Includes: carbide tipped blade, socket wrench and switch button.
Dewalt DW734 Portable Reversible Corded Planer Dewalt DW735 2-Speed Portable Corded Planer Dewalt D24000 Professional Corded Tile Saw
4-column carriage lock for reduced snipe. Extra-long in-feed and out-feed tables provide 33-1/2" of material support. 3-knife cutter- head provides 96 cuts per inch. Material removal gauge and thickness scale for accurate cuts. Turret depth stop allows easy return to most frequently used depths. STANDARD EQUIPMENT: Dust hood. SPECIFICATIONS:  15 amp, 120-Volt AC motor, 10,000 RPM, 1/8" max depth of cut, 6" depth capacity. Feeds 26' per minute. 80 lb. weight. Automatic carriage lock for reduction of movement that causes snipe without need for manual engagement by user. 2-speed gear box allows user to change feed speed to optimize cuts per inch at 96 or 79 CPI. Fan assisted chip ejection vacuums chips off the cutter-head and exhausts them out of the machine. Material removal gauge and extra-large thickness scale for accurate cuts. Extra-large turret depth stop. STANDARD EQUIPMENT: Dust hose adapter, dust ejection chute. SPECIFICATIONS:  15- amp, 120-Volt AC motor, 10,000 RPM, 1/8" Max depth of cut 1/8", 6" depth/13" width capacity 6". Width capacity 13". Feeds 14' or 26' feet per minute. Integrated cantilevering rail/cart system allows for 24" ripping capacity, 18" tile on diagonal, stainless steel rail system is integrated into the saw frame, integrated 45/22.5 degree miter feature for quick angled cuts, plunge feature, adjustable dual water nozzles, rear and side water attachments help contain water run-off and blade spray, removable cutting cart for easy cleaning, 5 gallon water pan, edge guide with 2-position,45/90, degree guide, will cut hard materials such as porcelain and stone. Specs: 15.0Amps, blade diameter 10", max rip capacity 24" tile, diagonal cut capacity 18" tile, max depth of cut 3-1/8", pan material, ABS plastic, removable water containment tray, 34"Lx26"W(housing only), weight 69 lbs.
Diamond Products 65020 Corded Tile Saw
Portable, light weight, with easy clean water tray and liquid cooled bearing housing, blade guard includes brush for additional blade cooling protection and overspray. Solid steel frame with convenient carrying handles. Specs: 15amp/115V, rip cut up to 20", diagonal cut to 14", up to 10" blade capacity  with 5/8" arbor, dimensions 39"Lx24"Wx24"H, weighs 43 lbs. Includes: 10" blade, water pump and 45 degree and 90 degree rip guide/miter block.
   
 
1