Home > POWER TOOLS & ACC > POWER TOOLS > BENCH & STATIONARY > SHARPENERS
Sort By:
1
BIT MASONRY IMP RDY 5/32X4X6IN Irwin 1870541 1-Piece Impact Masonry Bit Irwin 1870542 1-Piece Impact Masonry Bit
Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. For use in impact drivers. 2 cutter heads. Impact ready. Percussion rates. Carbide tipped cutting edge material. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Irwin 1870543 1-Piece Impact Masonry Bit Dewalt DW2572 Masonry Drill Bit Irwin 1870544 1-Piece Impact Masonry Bit
Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Irwin 1870545 1-Piece Impact Masonry Bit Dewalt DW2573 Masonry Drill Bit Irwin 1870546 1-Piece Impact Masonry Bit
Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
BIT MASONRY IMP RDY 3/16X4X6IN Irwin 1870547 1-Piece Impact Masonry Bit Dewalt DW2574 Masonry Drill Bit
Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. 1/4" hex shank for use in impact drivers. 2 cutter heads. Impact ready. Percussion rates. Carbide tipped cutting edge material. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping.
BIT MASONRY IMPT RDY 1/4X4X6IN Tapcon 1870565 1-Piece Impact Drill Bit Tapcon 1870567 1-Piece Impact Drill Bit
Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. 1/4" hex shank for use in impact drivers. 2 cutter heads. Impact ready. Percussion rated. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Tapcon 1870566 1-Piece Impact Drill Bit Tapcon 1870568 1-Piece Impact Drill Bit Tapcon 1870569 1-Piece Impact Drill Bit
Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Speedbor 88889 Wood Boring Spade Bit Set Speedbor 2000 87950 Wood Boring Spade Bit Set Drill Doctor WSSA0002012 Replacement Abrasive Belt Kit
Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension. Includes (1) one each: 1/2", 3/4" and 1". Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension. Includes (1) one each: 1/2", 3/4" and 1". For use with Work Sharp Knife & Tool Sharpener only, Orgill SKU# 775.2801. Includes two each: P80 coarse grit belts, P220 medium grit belt, and 6000 fine grit belts.
Drill Doctor WSSA0002703C Replacement Abrasive Belt Kit Drill Doctor WSSA0002704C Replacement Abrasive Belt Kit Drill Doctor WSSA0002705C Replacement Abrasive Belt Kit
Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with: (6) P80 Coarse grit belts for tool grinding and sharpening. Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with (6) P220 Medium grit belts. Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with (6) 6000 Fine grit belts.
Daredevil DSB5006 Standard Length Wood Boring Spade Bit Set Speedbor 88886 Wood Boring Spade Bit Set Black & Decker 71-536 Wood Boring Spade Bit Set
Full cone threaded tip provides the speed needed to drill faster and it pulls the bit through the material with less effort and vibration than other spade bits. Includes (1) one each: 3/8", 1/2", 5/8", 3/4", 7/8" and 1". Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension, fits all standard quick change chucks. Includes (1) one each: 3/8", 1/2", 5/8", 3/4", 7/8" and 1". All are 6" long standard length drill bits. General purpose wood drilling; fits most major brands. Includes: (1) 1/4", (1) 5/16", (1) 3/8", (1) 1/2", (1) 9/16", (1) 5/8", (1) 3/4", (1) 7/8", (1) 1", (1) 1-1/8", (1) 1-1/4", (1) 1-3/8", (1) 1-1/2", (1) storage pouch.
Dewalt DW1587 Wood Boring Spade Bit Set BIT SET WOOD SPADE 6PC 3/8-1IN Darex/Drill Doctor DA313020GF Drill Replacement Parts
Cutting spurs for optimum hole finish, a hang hole for bit storage and wire pulling, full length heat treat for longer life, flats on shank to prevent slipping in chuck, 1/4" Quick Change shank which fits all drills, and 1/4" quick change holders. Includes (1) each: 3/8", 1/2", 5/8", 3/4", 7/8", and 1". Set includes: 3/8", 1/2",  5/8", 3/4", 7/8", 1" and case. Replaces sharpening wheel of 3/32" to 1/2" drill bits for Drill Doctor. Fits all GenX model drill bit sharpeners. 3 layers of nickel/diamond plating to provide long life; lasts for 200 or more sharpenings.
Speedbor 88888 Wood Boring Spade Bit Set Speedbor 341008 Wood Boring Spade Bit Set Milwaukee 49-22-0071 Flat Boring Bit Set
Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension. Includes (1) one each: 3/8", 1/2", 5/8", 3/4", 7/8", and 1". Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension, fits all standard quick change chucks. Includes (1) one each: 3/8", 1/2", 5/8", 3/4", 1", 1-1/8", 1-1/2" and case. Bores fast clean holes in wood, plastic, plywood and formica. 1/4" shank dia. Drill point and cutting edges can be resharpened. 6-1/16" overall length. Kit includes: 6 Bits; (1) 3/8", (1) 1/2", (1) 5/8", (1) 3/4", (1) 7/8" and (1) 1" bit.
Speedbor 88898 Wood Boring Spade Bit Set Milwaukee 49-22-0175 Flat Boring Bit Set Speedbor 88894 Wood Boring Spade Bit Set
Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension. Includes (1) one each: 3/8", 1/2", 5/8", 3/4", 1" and 6" Quick Change. Double wing spurs and cutting edge produces easy hole formation, faster wood boring and fast chip removal. Flat boring set provides quick and easy accessory changes with the Quick-Change hex shank for use in all universal Quik-Lok extensions. Includes (1) one each: 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 6" universal Quik-Lok all hex extension and case. Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension, fits all standard quick change chucks. Includes (1) one each: /4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" and storage pouch.
Irwin 44801 Drill Press Adjustable Wood Bit Speedbor 88887 Wood Boring Spade Bit Set Irwin 45002 Drill Press Adjustable Wood Bit
Adjustable cutting blade bores a variety of hole sizes. Cuts 19 size holes in increments of 1/8". Lockhead screw securely holds blade at desired boring diameter. Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension, fits all standard quick change chucks. Includes (1) one each:  1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" and storage rack. Adjustable cutting blade bores a variety of hole sizes. Cuts 19 size holes in increments of 1/8". Lockhead screw securely holds blade at desired boring diameter.
BIT BORING FLAT SET 13PC      Drill Doctor DD350X Drill Bit Sharpener Work Sharp WSKTS Knife and Tool Sharpener
BIT BORING FLAT SET 13PC
Our Price: $52.59
Flat boring bits are the ideal solution for boring holes at any angle in a variety of materials. Premium quality spade drill bit is made of heat-treated high carbon steel. Pilot drill point and cutting edge of the paddle bit is designed to be resharpened, saving you time while extending the life of the bit. The 1/2" x 4.5" flat spade bit bores clean, fast holes at any angle in wood, plastic, plywood and Formica. Includes (1) each: 1", 1/2", 15/16", 1/4", 11/16", 13/16", 3/4", 3/8", 5/16", 5/8", 7/16", 7/8" and 9/16" flat boring bits. Sharpens HSS, Carbide, Cobalt tin coated and Masonry bits. Sharpens bits in less than 30 seconds. Easily replaceable diamond grinding wheel sharpens 118 degree point angle size 3/32" to 1/2". On chuck alignment for simplified sharpening process. Multi position grinding head with belt that conforms to cutting edge of any knife or tool, appropriate angle for specific knives. Flexible abrasive belts in multiple grits, creates a taper grind. Includes: Work Sharp Power Platform, belt sharpening module, kitchen knife guide, outdoor knife guide, abrasive belt kit: (P80 coarse, P220 medium, 6000 fine honing, quick start guide and instructional DVD.
CHOPSAW 14INCH 15AMP 3800RPM  Drill Doctor DD500X Drill Bit Sharpener SAW MITER COMPOUND 10IN
SAW MITER COMPOUND 10IN
Our Price: $143.64
15 amp, 4 hp, 3,800 rpm motor with replaceable brushes provides power and durability. Quick-release material clamp allows for easy material cutting and removal. Cutting fence with miter adjustment allows up to 45 degree angles to be cut. Spark deflector provides safety and clear line of sight for cutting. Heavy duty steel base provides stability while cutting. Spindle lock for easy blade changes. 8' power cord. Weighs 32 lbs. 120 volts. 1" arbor size. Max Capacity (Round) 4-3/4" x 5-1/3". The model 500x is designed for durability and has the flexibility required to sharpen the largest range and most popular sizes of dull or broken bits including split points and masonry bits. With its popular "push to stop" design, the 500x splitting port won't allow your point to be over split. Ideal for a serious DIYer, hobbyist and the professional drill bit user who sharpens frequently and who works in wood and metal. The large bit and reverse twist (left hand) chucks increase this models already powerful capacities. Large table for better material support with vice clamping system to secure work space. Thumb actuated positive stops for quick miter adjustments. Dust collector attachment minimizes airborne particles. Specs: 5,000 rpm, 0-52 degree miter angle to the left and right for increased flexibility, 0-45 degree bevel angle to the left to provide clean and accurate bevel cuts. Includes: 24T TCT saw blade, dust bag, vise assembly, 5mm hex bar wrench, and holder.
MITERSAW COMPOUND 10IN W/LASER Drill Doctor DD750X Drill Bit Sharpener Rockwell RK7866 Corded Sander
Make precision miter cuts up to 45 degrees left and right with 9 stops at commonly used angles. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-Tipped blade installed, hold-down clamp, dust bag, two extension wings, blade wrench and two AAA batteries for laser. No load speed: 4600 rpm. Weighs 24 lbs. Permanent magnet motor produces consistent power. Push to Stop feature will not allow you to over split the bit point, adjustable material take-off, replaceable diamond sharpening wheel. Custom Point angle sharpening, choose any angle from 115 degree to 140 degrees. One chuck sharpens all sizes, 3/32"-3/4", HSS, carbide, cobalt, TiN-coated and masonry bits. Includes:  professional hard shell carrying case. Aluminum work table with dust port, adjustable belt tension, quick sanding belt changing. Specs: disc speed-3450/min, belt speed-1700/SFM, table tilt range-0-45degrees, table size-8-29/32" x 6-5/16", belt table tilt range-0-90 degrees. Includes: 45 degree miter gauge, Allen key, belt sander/disc sander.
SAW COMPOUND MITER 10 INCH    Rockwell RK7453 Corded Band Saw Milwaukee 6177-20 Chop Saw
SAW CHOP 15 AMP 14 IN
Our Price: $183.36
10" Compound miter saw with 14 amp motor, 5,200 rpm. Maximum cut capacity at 90? degree miter - 4"x4" and 2"x6" dressed lumber. Maximum cut capacity at 45? miter - 2"x4" and 1"x6" dressed lumber. Maximum cut capacity at 45? bevel - 2"x4". Miters 45 to 90 degrees; bevels 0-45 degrees. Lightweight die cast aluminum base allows for weight of 36.6 lbs. Accepts SS9100 (087.7894) leg stand and material supports. Includes dust bag, work clamp, 40th carbide tipped blade and blade wrench. Aluminum working table with blade guide adjustment, work light and blade quick tension adjustment. Max cutting depth=3-1/8"; Throat depth=9"; Table Size=11-13/16" x 11-13/16"; Table Bevel=0-45 degree. Accessories include: Parallel Guide; Miter Gauge; Hex key. 59-1/2" blade included. A quick set-up, quick release locking device holds material being cut securely during the cutting process. Material can be angle cut up to 45 degrees. Arm locks down for easy portability. Applications: fast cutting of drywall track in bundles, angle iron, conduit, pipe, channels, tubing, and rebar. Workpiece capacity: cutting pipe 5" O.D., bar stock 3-5/8", square stock 5". Specs:15 amp motor, 120 volts AC only. No load RPM 3900. 1" arbor. 9" maximum opening. Includes: vise, abrasive wheel and hex wrench.  Rental.
MITERSAW SLIDING COMPOUND 10IN Hitachi CC14SFS Cut-Off Saws Hitachi C10FCH2 Sliding Compound Corded Miter Saw with Laser Marker
Sliding rail system for crosscutting stock up to 12" wide. Make precision miter cut up to 45 degrees left and right. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-tipped blade, hold-down clamp, dust bag, two extension wings, rear support foot bar, blade wrench and two AAA batteries for laser. 4800 rpm. Weighs 40 lbs. Powerful Hitachi motor, soft grip D-handle for easy operation and trigger switch with lock-off button and spark chute (diversion guard) for operators safety. Quick-locking vise for fast clamping. Spindle lock for easy wheel replacements. Double insulation. STANDARD EQUIPMENT: 1 cut-off wheel, 1 hex bar wrench. SPECIFICATIONS: 14" wheel diameter, 1" arbor. Capacity: 65mm (2-9/16") bar dia., 120mm (4-47/64") pipe dia., 130mm x 115mm (5-1/8" x 4-1/2") 235mm x 70mm (9-1/4" x 2-49/64") shape steel (W x H). 2,000W/AC 230V, 2,400/AC240V (15 AMP/AC120V power input (Full-Load Current for USA). 3,800/min no-load speed. 603 x 318 x 603mm. 36 lbs. tool weight. Laser marker system for increased cutting accuracy. Horizontal handle, Large table, large extended fence raises to 4" for cutting crown molding vertically. Thumb actuated positive stops for quick miter adjustments. Carbon brush access, allows user to replace brush as needed  Dust collector attachment, to minimize airborne particles. Max work piece capacity is 2-5/16" H, max. by 5-21/32" W. Specs: Single-phase 120VAC 60Hz motor, 0-52 degree miter angle range to the right and left, 0-48 degree bevel angle range to the left with adjustable bevel stops. Includes: 10" tct saw blade, vice assembly with knob bolt, 10mm box wrench, 4mm hex bar wrench.
Dewalt D28710 Chop Saw Rockwell Shop RK7136.1 Sliding Compound Corded Miter Saw with Leg Stands Dewalt DW713 Single Bevel Compound Corded Miter Saw
Quick-lock vise for fast material clamping. Ergonomically designed "D" handle provides comfortable hand position. Top handle allows saw to be easily moved. 45-degree pivoting fence allows for fast and accurate angle cuts. Spindle lock allows users to make wheel changes fast and easy saving time and money. Chain lock-down allows the head of the saw to be locked in the carrying position. Steel base allows users to weld jigs or stops directly onto the base. STANDARD EQUIPMENT: 14" abrasive wheel and wrench. SPECIFICATIONS: 15 amps, 3.2 H.P. No-load speed 3,800 RPM. 1" Arbor. WORKPIECE CAPACITY: Cutting capacity 4" round and 4" x 7-3/4" rectangular. Metal legs attach directly to the saw base. Lightweight, die cast aluminum base for easy transport. Includes adjustable rollers to construct infeed/outfeed support. Depth stops on the rollers allow for unlimited cuts of the same length. Preset detents for setting accurate, repeated miter cuts. Bevel adjusts from 0 to 45 degrees to accommodate most bevel cuts. Includes: dust bag and work clamp. Two-piece aluminum and Lexan guard design protects against side impact. Lexan allows user to see the blade without the glare, providing a clean line of sight. Base handle design delivers increased comfort and portability to the end user. Positive bevel stops, cam lock miter handle, adjustable stainless detent plate and precise miter system. SPECIFICATIONS: 13 amp motor, 5,000 RPM, negative 3-degree to 48-degree bevel capacity, left and right miter capacity, machined base fence support, tall sliding fence and easy access bevel lock.
Dewalt D28715 Chop Saw Makita LS1040 Double Bevel Compound Corded Miter Saw Dewalt DW715 Single Bevel Compound Corded Miter Saw
Powerful 15.0 amp motor provides more overload capacity, increasing performance and durability. Quick-Change Blade Change System increases productivity by providing user ability to change wheels without a wrench. Quick-Fence tool-free, 45-degree adjustable fence for fast, accurate angle cuts and Quick-Lock vise for fast clamping on different size materials. Soft start extends gear and motor life. Ergonomically designed ``D" handle for more comfortable hand position reducing user fatigue. Extra wide solid steel base and heavy-duty lock down pin. Heavy-duty compression spring for smooth movement and greater durability. Spindle lock allows user to make quick wheel changes. Large cutting capacity, 5" round, 4-1/2" x 6-1/2" rectangle. Adjustable spark guard allows user to channel sparks. Easily accessible brushes for convenient servicing on worksite. STANDARD EQUIPMENT: 14" abrasive wheel, blade change wrench, blade bolt, blade washer. SPECIFICATIONS: 15.0 AC Amps, 5.5 HP, 1" arbor, 14" wheel diameter, 5" max. capacity (round), 4-1/2" x 6-1/2" max. capacity (rectangular), 4,000 RPM, spindle lock, quick lock vise. 21" tool length. 39 lb. tool weight. Machined aluminum base ensures accurate cuts. Performs compound cutting operations. Dual post compound pivoting arm. Bevel cuts up to 45 degrees to the left. Miter cuts 0-45 degrees left and 0-52 degrees right. Specs: Blade diameters 10", arbor 5/8", max. cutting capacity (bevel/miter) 90 degree/90 degree 2-3/4" x 5-1/8", 45 degree/45 degree 1-3/8" x 3-5/8", no load rpm 4,600, length 18-23/32", weight (lbs.) 24.2. Includes: socket wrench, carbide tipped blade, dust bag and triangular rule. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree to the left and 0-3 degree to the right for increased capacity. 0-50 degree left and right miter capacity for greater versatility. Cam lock miter handle with miter detent override deliver quick, accurate miter angles. 4-hardened steel bevel stops at 0, 33.9, 45 and 48 degrees. Lightweight with built-in carry handle for easy portability. STANDARD EQUIPMENT: Carbide blade, extension kit, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 4,000 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 5-1/4" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat, 6-1/2" horizontal capacity crown molding lying flat, 2 x 8" for 45 degree bevel cut capacity (dimensional lumber), 2 x 8" for 90 degree cross-cut capacity (dimensional lumber), 2 x 8" max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6 dimensional lumber max width for 45 degree miter cut capacity, 42 lbs. tool weight. Stand Not Included.
Hitachi C12FDH Dual Compound Miter Saw Hitachi C8FSE Single Bevel Sliding Compound Corded Miter Saw Dewalt DW716 Double Bevel Compound Corded Miter Saw
Laser marker system accurately indicates where the blade will cut on the material and can be easily adjusted to the right or the left of the cut mark depending upon the user preference. Powerful 15 amp motor with 1,950 watts of output power smoothly powers through hardwoods with ease. Elastomer compound coats the horizontal handle, reducing vibration, while adding comfort and preventing slippage. Tall, pivoting aluminum fence that stands at a height of 5-1/8" allows crown molding to be cut vertically for convenience. Large base provides better support and balance to prevent material from warping. Externally accessible carbon brushes allow for quick and easy maintenance to prolong tool life. Miter scale ranges from 0-52 degrees, both to the right and left, for a broader range of cuts. Miter angles can be quickly adjusted using Hitachi's thumb actuated positive stops. Bevel scale ranges from 0-48 degrees to the right and left allowing the material to stay in place while the saw head flips to make opposing cuts. After major bevel angle is secured, micro-bevel adjustment knob can be used to dial-in to a precise angle without the weight of the saw head compromising the accuracy. Weighs 46.3 lbs. Electronic speed control, positive miter stops for quick adjustments, adjustable pivot fence, splinter guard, externally replaceable carbon brushes, dust collector attachment, precise compound cuts, easy-to-read measurements and quick settings, Linear ball bearing slide system, vertical handle with elastomer grip. Specs: 5,500 RPM, 8-1/2" blade diameter, 5/8" arbor size, bevel angle range: (Right) 0-5 degrees, (Left) 0-48 degrees, miter angle range: (Right) 0-57 degrees, (Left) 0-45 degrees, miter detent stops: (R & L) 15, 22.5, 31.6, 45, degrees, cross cut capacity (90 degrees) 2-9/16"x12", size 21-27/32"Wx31-3/32"Lx19-3/32"H, weighs 31 lbs. Includes: 8-1/2" TCT saw blade, dust bag, vice assembly, box wrench, sub fence. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree with positive stops at 0, 33.9, 45 and 48 degree both left and right allowing user to flip the saw not the material. Back fence design delivers ability to cut 2 x 10" dimensional lumber at 90 degrees and 2 x 8" at 45 degrees. Precise miter system and machined base fence support, innovative gearbox and belt-drive design for increased cutting capacity. Lightweight, head lock-down pine and built-in carrying handle. Cam lock miter handle with detent override. Designed for use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path. STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 3,600 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat (10" with back fence), 6-1/2" horizontal capacity crown molding lying flat,  2 x 8" (2 x 10" with back fence) left and right for 45 degree bevel cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) for 90 degree cross-cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6" (2 x 8" with back fence)  dimensional lumber max width for 45 degree miter cut capacity. 44 lbs. tool weight. Stand Not Included.
SAW MITER SLIDE COMPOUND 10IN SAW MITER W/BATT W/CHARGER 20V CHOP SAW DRY CUT 12IN W/DIABLO
15 AMP motor tackles tough cutting jobs with ease. Zero rear clearance slide system. Ergonomic upfront bevel lock for quick and easy adjustments of bevel angles. Tool-less, adjustable laser marker for cutting accuracy. Positive stops with miter detent override for faster transitions between miter angles. Equipped with LED light for added visibility. 0-60 degree miter angle to the right and 0-55 degree miter angle to the left, 0-48 degree bevel angle range to the right and left. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 13 mm wrench, and vice assembly. SPECIFICATIONS: 15 AMP belt driven motor, pivoting fence, no-load speed of 3,200 RPM. Utilizes 20 volt Max Battery pack which provides on average, 183 cuts of 2x4 pine or 275 cuts of 3-1/4 pine baseboard. Integrated XPS cross system provides adjustment free cut line indication for better accuracy and visibility. Capacity to cut up to 3-5/8" nested crown and 3-1/2 base vertically. Will cut 2x8 lying flat. Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Oversized bevel scale makes bevel angle adjustments accurate and easy. Compact, lightweight design (31.6 lbs) allows for easy transport and storage. Cam lock miter handle delivers quick and accurate miter angles. Precise miter system and machined base fence support optimized durability and cutting accuracy. 7-1/4" blade diameter. No load speed: 3750 rpm. Includes battery, charger, carbide blade, user's guide, blade wrench and material clamp. This Dry Cut Saw for metal cutting has a 4-1/2" cutting capacity in a compact frame. Handles big jobs and moves easily from the shop to jobsite. Powerful 15 amp motor and no load 1500 rpm cuts faster and cleaner than a chop saw; no debarring needed. Soft-start for a motor that runs smoother and longer for more cuts. Includes a 12" dry cut saw and a Diablo Cermet-tipped 60-tooth blade. Weighs 38.2 lbs.
Makita LS1018 Dual Slide Compound Miter Saw Makita LC1230 Cutting Saw SAW MITER SLDNG COMPOUND 12IN
Large cutting capacity in a compact design and less weight at only 43.7 lbs. for job site portability. Powerful 13.0 amp direct drive motor requires less maintenance and delivers 4,300 rpm. Cuts up to 12" at 90 degrees and 8-1/2" at 45 degrees. Linear ball bearing system engineered to deliver "dead-on" accurate cuts. Rear handle bevel lock is easily accessible and adjusts 0-45 degrees (left and right) with positive stops at 0 degrees, 45 degrees (left and right).  Soft start feature for smooth start-ups. Ergonomic rubberized D-handle design for better fit and added comfort. Large precision machined aluminum base supports material for more efficient cutting. Electric brake for maximum productivity. See-thru blade guard system for greater visibility of blade and line of cut. Oversized trigger switch for better fit, added comfort and easier operation. Includes extension wings for supporting long work pieces. Ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general contractors and more. Includes: (1) 10" 40T Miter saw blade, (1) triangle rule for miter saws, (1) vice assembly, (1) dust bag assembly, (1) extension wing and (1) wrench 13mm. Saw features a large cast aluminum base for stability, externally accessible brushes, "tool-less" guide plate, D-shape handle for easy gripping, shavings collection tray, quick release vise and shaft lock for easy blade changes. Applications; cutting light pipe, angle iron, tubing and conduit. Specs: 1" arbor, max. cutting capacities at 90 degrees 4-1/2", at 45 degrees 3-1/2", 1,300 no load rpm, overall length is 20-1/4", weight 41.9 lbs. Includes: carbide tipped blade, socket wrench and switch button.
SAW MITRE DUAL BEVEL 12IN 120V Dewalt DW717 Double Bevel Sliding Compound Corded Miter Saw SAW MITER SLDG CMPD W/LSR 10IN
The DHS716 12" (305mm) 120 volt Max Compound Miter Saw with top handle delivers power and cutting capacity with the portability and convenience of a cordless tool. Flexible power for corded or cordless use. CutLine Blade positioning system delivers adjustment free cutline indicator. Includes the 12" Compound Miter Saw, blade, blade changing wrench, dust bag and a  120 volt AC adapter (Batteries And Dual Port Fast Charger Sold Separately). 45 degree bevel cut capacity; 45 degree miter cut capacity; 90 degree cross-cut capacity. Arbor size: 5/8" (1") IN. Weighs only 44 lbs. Cross cut positive stop for optimal cutting position. XPS Laser Compatible. Tall sliding fence for optimized material support. Bevel detent system with 7 hard stops gives you accurate, repeatable cuts. Adjustable stainless steel miter plate. Cam lock miter system. Sliding fence that supports up to 6" base molding to the left of the blade & up to 3 1/2" to the right of the blade. Machined base fence insures blade perpendicularity to fence. SPECIFICATIONS: Blade Diameter: 10"; Bevel Capacity: 0 degrees - 48 degrees; Miter Capacity: 60 Degrees left, 51 degrees right; Crosscut Capacity at 0 degrees: 2" x 14"; Crosscut Capacity at 45 degrees: 2" x 12"; Vertical Capacity: 6" base molding, 6-1/4" crown molding; Amps: 15 amps; Net Weight: 51 lbs. Stand Not Included. Large cutting capacity in a compact design with less weight at only 57.9 lbs. Powerful 15.0 amp direct drive motor requires less maintenance and delivers 3,200 rpm. Large-sized aluminum base improves stability of material for efficient cutting. Unique 2-steel rail sliding system offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (5-1/4?), crown molding (6-5/8? nested), and crosscut a 4" x12" at 90 degrees. The saw miters 0 to 60 degrees left and right, with positive stops at 0, 15, 22.5, 31.6, 45 and 60 degrees (left or right). The bevel lock allows for easy access and quick adjustments from 0 to 48 degrees (left and right). Includes: (1) 10" x 5/8?60T Micro-polished Miter saw blade, (1) triangle rule, (1) vertical vice, (1) dust bag, (1) Hex wrench.
Hitachi C10FSBP4 Double Bevel Sliding Compound Corded Miter Saw Hitachi C10FSHPS Double Bevel Sliding Compound Corded Miter Saw MITER SAW KIT 10IN M18 9.0BATT
Positive angle stoppers for easy adjustment of teeth, turn table position for miter cutting (at the right and left of the 0-degree center setting, at 15,22.5, 31.6 and 45-degree settings). High sub fence. Legibly labeled angle scale and bevel scale. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for smooth, accurate cutting, fine surface finish and low noise operation. Poly V-belt and motor driving system for longer service life. STANDARD EQUIPMENT: 1 each: Vise Assembly, dust bag, 10mm box wrench, 255mm (10") TCT saw blade. SPECIFICATIONS: 10" diameter, 120V, 12 Amp, 1,400W max. output, 3,800 RPM, soft start and speed control. Max cutting capacities: 0-degree (right angle), miter cut 45-degree (left/right), miter right 57-degree, bevel cut 45-degree (left), bevel cut 45-degree (right), miter left/right 45-degree plus bevel left 45-degree, miter right 45-degree plus bevel right 45-degree. Miter cutting range: 0-45 degree left, 0-57 degree right. Bevel cutting range: 0-45 right and left. 20-3/4W x 41-1/2"L x 24-1/4"H. 43 lbs. tool weight. 12 AMP belt driven motor with soft start and overload protection. Adjustable laser guide for precise cutting. Soft Start feature reduces noise and recoil during start-up. Electronic speed control keeps RPMs constant as load varies. Linear ball bearing slide system for precision and durability. Left and right positive stops on miter gauge located at 0, 15, 22.5, 31.6, and 45 degrees. Dust collection system collects 100% more dust than previous models. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 10 mm box wrench, and vice assembly. SPECIFICATIONS: 12 AMP belt driven motor, pivoting fence, no-load speed of 3,800 RPM. Milwaukee Powerstate brushless motor provides more corded cutting performance, power, more  run-time and longer life. Dual Bevel with 9 detents and easy access bevel lever. Top and side carrying handles for maximum portability. Detent override for easily setting miter locations outside of detents. The RedLink Plus Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection and productivity. Easy access to change blade. Durable RedLithium battery pack delivers more run-time, power and longer battery life with up to 400 cuts per charge. Maximum miter capacity 50/60. Includes: M18 Fuel Dual Bevel Sliding Compound Miter saw, (1) M18 RedLithium High Demand 9.0 battery pack, (1) M18 and M12 Rapid charger, (1) Blade Wrench, (1) Carbide Tipped Blade, (1) Clamp and (1) Dust bag.
Dewalt DWS780 Double Bevel Sliding Compound Corded Miter Saw SAW MITER SLIDING 12IN 120V   SAW MITER COMPOUND 12IN BRSHLS
Adjustable stainless steel miter detent plate with 10-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. Single lever action double bevel design allows saw to easily bevel left and right 0-48 degree with positive stops at 0, 22.5, 33.9 and 45 degree in both directions permitting user to flip the saw and not the material. Back fence design delivers ability to cut 2 x 16" dimensional lumber at 90 degrees and 2 x 12" at 45 degrees. Precise miter system and machined base fence support deliver increased cutting accuracy. Innovative gearbox and belt-drive design for increased vertical cutting capacity. Miters 60 degrees to the left and 50 degrees to the right. Dual horizontal steel rails with clamping mechanism and linear ball bearings. Camlock miter handle with detent override. Compact and lightweight design for quick, easy transport and storage. For use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path.  STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15 amps, 3,800 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 16" horizontal capacity baseboard lying flat, 11-1/4" horizontal capacity crown molding lying flat,  2 x 14" (2 x 16" with back fence) 45-degree bevel cut capacity (dimensional lumber),  2 x 14" (2 x 16" with back fence) for 90-degree cross-cut capacity (dimensional lumber),  16" for 90-degree cross-cut capacity (max width), 2 x 12" max width for 45-degree miter-cut capacity (max height), 2 x 12" for 45-degree miter-cut capacity (max width). 53 lbs. tool weight. Stand Not Included. 120 volt Max Double Bevel Sliding Compound Miter Saw with CutLine delivers capacity, accuracy, power, ease of use and the durability of a corded tool with the portability and convenience of a cordless tool. CutLine blade positioning system delivers accurate line of sight to be cut. Includes the 120 volt AC adaptor. (60 Volt Max Lithium Ion Batteries And Fast Charger Sold Separately). The 12" (305mm) 120V max compound miter saw delivers the power and cutting capacity that end users have come to expect from Dewalt corded miter saws with the portability and convenience of a cordless. Run time up to 289 cross cuts in baseboard along with the best in class vertical capacity against sliding fence. Tool height 26"; Tool length 32"; Tool weight 44 lbs. No load speed 3,800 rpm. Kit includes: (1) 12" (305mm) Compound miter saw, (1) Dual port fast charger, (1) blade, (1) 120V AC adapter, (2) 60V Max Lithium Ion batteries, (1) blade change wrench and (1) dust bag.
Milwaukee 6955-20 Double Bevel Sliding Compound Corded Miter Saw SAW SLIDNG MITER 12IN BRSHLS
The Miter Angle Digital Readout provides repeatable accuracy to 0.1 degree. Miter Angle Fine Adjust with Detent Override makes it simple to dial in precise miter angles. Dual Integral Jobsite Lights fully illuminate the work piece and cut line from either side of the blade. The powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start maintains constant cutting speed under load and decreases start up head movement. The Integral Dust channel captures up to 75 percent of the dust and debris cut. SPECIFICATIONS: Amps:  15.0; No Load Speed:  3,200 RPM; Blade Diameter:  12"; Arbor Size:  5/8" or 1"; Miter Range:  55 degrees  Left to 60 degrees  Right; Bevel Range:  48 degrees  Left to 48 degrees  Right; Miter Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 55 degrees; Right-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 60 degrees; Bevel Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees  Right-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees. Tool Weight  65 lbs. INCLUDES: Carbide Tipped Blade; Dust Bag; Blade Wrench. This double bevel sliding compound miter saw offers flexible power options; corded for unlimited run time or cordless for portability powered by Dewalt brushless motor technology. Accuracy is delivered through adjustable miter scale with 11 positive stops and visibility bevel scale the CutLine blade positioning system. Up to 289 cross cuts in 3-1/4" base molding. Compact design weighs only 56 lbs. Includes: (1) DHS 790 Miter saw, (1) Dual port fast charger, (2) 60 volt Max Lithium Ion batteries, (1) blade wrench, (1) 12" blade, (1) DCA 120 volt Max corded power supply and (1) dust bag.
   
 
1