Home > POWER TOOLS & ACC > POWER TOOLS > BENCH & STATIONARY > BENCH GRINDERS
Sort By:
1
BIT EXTENSION WOOD SPADE 6IN  Speedbor 88702 Spade Drill Bit Extension Dewalt DW1588 Spade Drill Bit Extension
Angle dimples scoop the wood to drill. Heat treated shaft resists bending under heavy loads. For all wood bits with 1/4" round shanks, three flats on shank. Follows 5/8" and larger bits through hole. Heavy-duty, double set screw type, adds 6" to 12" to regular bit lengths. Forged of finest quality tool steel. Allen wrench included. Heavy duty shank for maximum durability; hex shank prevents slipping and fits all 1/4" quick change systems; used for bit storage and wire pulling.
Daredevil DSBE1012 Straight Spade Drill Bit Extension Dewalt DW1589 Spade Boring Bit Extension BIT EXTENSION WOOD SPADE 12IN
Designed for professional users seeking speed, ease of use and hole quality. A full cone threaded tip pulls the bit through the material with less effort and vibration. Contoured paddle delivers faster chip removal; 1/4" hex shank with poser groove reduces slippage. 12" straight extension. Heavy duty shank for maximum durability; hex shank prevents slipping and fits all 1/4" quick change systems; used for bit storage and wire pulling. Angle dimples scoop the wood to drill. Heat treated shaft resists bending under heavy loads.
Speedbor 88601 Spade Drill Bit Extension Speedbor 88889 Wood Boring Spade Bit Set Speedbor 2000 87950 Wood Boring Spade Bit Set
For all wood bits with 1/4" round shanks, three flats on shank. Follows 5/8" and larger bits through hole. Heavy-duty, double set screw type, adds 6" to 12" to regular bit lengths. Forged of finest quality tool steel. Allen wrench included. Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension. Includes (1) one each: 1/2", 3/4" and 1". Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension. Includes (1) one each: 1/2", 3/4" and 1".
Quik-Lok 48-28-1000 Drill Bit Extension Lock-n-Load 4935703 Quick Change Drill Bit Extension Lock-n-Load 4935704 Quick Change Drill Bit Extension
Hardened shank for maximum durability; tool-less quick change; no hex key needed. Universal Quik-Lok. Carbon steel construction sleeve and body. Jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits and the 1/4" Quick Change range now holds insert bits; magnetic for holding. Lock-n-Load system for one handed quick release. Carbon steel construction sleeve and body. Jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits and the 1/4" Quick Change range now holds insert bits; magnetic for holding. Lock-n-Load system for one handed quick release.
Lock-n-Load 4935705 Quick Change Drill Bit Extension BIT MASONRY SET 5PC 1/8-3/8IN Quik-Lok 48-28-1010 Drill Bit Extension
Carbon steel construction sleeve and body. Jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits and the 1/4" Quick Change range now holds insert bits; magnetic for holding. Lock-n-Load system for one handed quick release. High speed steel bits used in applications such as drilling in brick, cinder block and tile. Includes (1) each: 1/8", 3/16", 1/4", 5/16", 3/8" and space efficient case with pilfer proof tab. Hardened shank for maximum durability; tool-less quick change; no hex key needed. Universal Quik-Lok.
Daredevil DSB5006 Standard Length Wood Boring Spade Bit Set SPADE BIT EXTENSION QC 6IN    Bullet 16748 Masonry Drill Bit Set
Full cone threaded tip provides the speed needed to drill faster and it pulls the bit through the material with less effort and vibration than other spade bits. Includes (1) one each: 3/8", 1/2", 5/8", 3/4", 7/8" and 1". Used to extend your reach when drilling and driving. It features a quick change pull mechanism for fast bit change without additional tools. Any bit with a 1/4" hex shank with power groove can fit into the extension. Carbide tip penetrates surfaces faster while the flute removes material faster; used in applications such as drilling anchor holes when installing flag poles, mail boxes and running electrical conduit. Includes (1) one each: 3/16" x 4", 1/4"x4", 5/16"x4", 3/8"x4", 1/2"x4" and multi-purpose storage case.
Quik-Lok 48-28-1020 Drill Bit Extension BIT EXTENSION 3/8IN           EXTENDER SPADE BIT 6IN
BIT EXTENSION 3/8IN
Our Price: $13.36
EXTENDER SPADE BIT 6IN
Our Price: $13.85
Hardened shank for maximum durability; tool-less quick change; no hex key needed. Universal Quik-Lok. Extend your reach a full 12" when drilling with Milwaukee hole saw arbors. Secures with a hex key (included). The 3/8" hex fits 3-jawed chucks, 3/8" drill capacity and larger. Impact ready bits with FlexTorq have increased durability for long life. CNC machined resulting in accurate manufacturing for optimal fit into screw recess. Reflex core allows 2" bits flex up to 15 degrees to reduce breakage. Magnetic screw lock system for fastener retention minimizes drops and reduces wobbling. Ideal for reaching tight spaces. 1/4" shank size. Includes (2) 1" Impact Ready FlexTorq PH2s.
Speedbor 88886 Wood Boring Spade Bit Set Black & Decker 71-536 Wood Boring Spade Bit Set SPADE BIT EXTENSION QC 12IN
Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension, fits all standard quick change chucks. Includes (1) one each: 3/8", 1/2", 5/8", 3/4", 7/8" and 1". All are 6" long standard length drill bits. General purpose wood drilling; fits most major brands. Includes: (1) 1/4", (1) 5/16", (1) 3/8", (1) 1/2", (1) 9/16", (1) 5/8", (1) 3/4", (1) 7/8", (1) 1", (1) 1-1/8", (1) 1-1/4", (1) 1-3/8", (1) 1-1/2", (1) storage pouch. Used to extend your reach when drilling and driving. It features a quick change pull mechanism for fast bit change without additional tools. Any bit with a 1/4" hex shank with power groove can fit into the extension.
Dewalt DW1587 Wood Boring Spade Bit Set BIT SET WOOD SPADE 6PC 3/8-1IN Irwin 61170 Drill Bit Set
Cutting spurs for optimum hole finish, a hang hole for bit storage and wire pulling, full length heat treat for longer life, flats on shank to prevent slipping in chuck, 1/4" Quick Change shank which fits all drills, and 1/4" quick change holders. Includes (1) each: 3/8", 1/2", 5/8", 3/4", 7/8", and 1". Set includes: 3/8", 1/2",  5/8", 3/4", 7/8", 1" and case. Carbide tipped bits used in masonry applications, 1/2" diameter. Includes: 3/16", 1/4", 5/16", 3/8", 1/2" and plastic case.
Irwin Impact Performance Drill Bit Extension Irwin Impact Performance Drill Bit Extension Irwin 5026024 Drill Bit Set
Irwin Drill Bit Extension, Series: Impact Performance, 3/4 in Diameter, 6 in Overall Length, Quick Change Shank, Oxide, Black, Suitable For Use With: 1/4 in Hex Shank Accessories Irwin Drill Bit Extension, Series: Impact Performance, 3/4 in Diameter, 12 in Overall Length, Quick Change Shank, Oxide, Black, Suitable For Use With: 1/4 in Hex Shank Accessories High speed steel drill bits used in masonry applications. Includes (1) one each: 3 /16", 1/4", 5 /16", 3/ 8", 1/2", and molded plastic case.
EXTENDER SPADE BIT 12IN       Speedbor 88888 Wood Boring Spade Bit Set Speedbor 341008 Wood Boring Spade Bit Set
EXTENDER SPADE BIT 12IN
Our Price: $17.01
Magnetic screw lock accessories help minimizes drops and reduce wobbles. 1/4" hex shank. Includes (2) 1" Impact Ready Flex Torq PH2s. Ideal for reaching tight spaces. Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension. Includes (1) one each: 3/8", 1/2", 5/8", 3/4", 7/8", and 1". Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension, fits all standard quick change chucks. Includes (1) one each: 3/8", 1/2", 5/8", 3/4", 1", 1-1/8", 1-1/2" and case.
Milwaukee 49-22-0071 Flat Boring Bit Set Irwin 4935655 Quick Change Bit Holder Speedbor 88898 Wood Boring Spade Bit Set
Bores fast clean holes in wood, plastic, plywood and formica. 1/4" shank dia. Drill point and cutting edges can be resharpened. 6-1/16" overall length. Kit includes: 6 Bits; (1) 3/8", (1) 1/2", (1) 5/8", (1) 3/4", (1) 7/8" and (1) 1" bit. Carbon steel construction sleeve and body for durability and life. Lock-n-Load system for one-handed quick release. Jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. The 7/16" Quick Change range now holds insert bits; magnetic for holding. Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension. Includes (1) one each: 3/8", 1/2", 5/8", 3/4", 1" and 6" Quick Change.
Daredevil DSBE1006 Straight Spade Drill Bit Extension Quik-Lok 48-28-1030 Drill Bit Extension Milwaukee 49-22-0175 Flat Boring Bit Set
Designed for professional users seeking speed, ease of use and hole quality. A full cone threaded tip pulls the bit through the material with less effort and vibration. Contoured paddle delivers faster chip removal; 1/4" hex shank with poser groove reduces slippage. 12" straight extension. Hardened shank for maximum durability; tool-less quick change; no hex key needed. Universal Quik-Lok. Double wing spurs and cutting edge produces easy hole formation, faster wood boring and fast chip removal. Flat boring set provides quick and easy accessory changes with the Quick-Change hex shank for use in all universal Quik-Lok extensions. Includes (1) one each: 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 6" universal Quik-Lok all hex extension and case.
Quik-Lok 48-28-1040 Drill Bit Extension Quik-Lok 48-28-1050 Drill Bit Extension Speedbor 88894 Wood Boring Spade Bit Set
Hardened shank for maximum durability; tool-less quick change; no hex key needed. Universal Quik-Lok. Hardened shank for maximum durability; tool-less quick change; no hex key needed. Universal Quik-Lok. Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension, fits all standard quick change chucks. Includes (1) one each: /4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" and storage pouch.
Speedbor 88887 Wood Boring Spade Bit Set BIT BORING FLAT SET 13PC      GRINDER BENCH 6IN W/LIGHT
BIT BORING FLAT SET 13PC
Our Price: $52.59
Blue-Groove point and cutting edge for faster chip removal; double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension, fits all standard quick change chucks. Includes (1) one each:  1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" and storage rack. Flat boring bits are the ideal solution for boring holes at any angle in a variety of materials. Premium quality spade drill bit is made of heat-treated high carbon steel. Pilot drill point and cutting edge of the paddle bit is designed to be resharpened, saving you time while extending the life of the bit. The 1/2" x 4.5" flat spade bit bores clean, fast holes at any angle in wood, plastic, plywood and Formica. Includes (1) each: 1", 1/2", 15/16", 1/4", 11/16", 13/16", 3/4", 3/8", 5/16", 5/8", 7/16", 7/8" and 9/16" flat boring bits. 1/2 hp induction motor for quiet smooth performance. Two flexible gooseneck lights for better illumination. Adjustable tool rests. Eye shields for safety. No load speed: 3.550 rpm. Pre-drilled heavy-duty cast iron base. Wheel size: 6" x 4/5" x 1/2". Shaft diameter: 1/2". Includes (1) 36G wheel, (1) 60G wheel and light bulbs. Net weight: 25 lbs.
Rockwell RK7867 Bench Grinder Dewalt DW756 Bench Grinder MK Diamond 158252 Bench Top Corded Tile Saw
Adjustable tool rests. No Load Speed 3450/min, magnifying eye shields and spindle lock. Wheel dimensions: 6"x3/4"x1/2" arbor hole grinding wheels, wheel grit left 36#/right 60#; machine weight 29 lbs. Accessories include: (2) Work rest and (2) Abrasive grinding wheels. The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 3,450 rpm no load speed, 6" wheel diameter, 1/2" spindle diameter, adjustable tool resets, length 15", weight 25.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench. Light weight and compact saw with detachable table stop that prevents saw from moving away from operator when pushing material into blade, rips ceramic and stone tiles up to 12", immersion blade cooling system requires no pump, built in 45 degree miter table, easy alignment rip guide, 45 degree rip guide, safeswitch prevents saw from being operated when locking key is removed. Specs: 120V, 5,500 RPM, blade capacity  4-1/2", depth of cut (4-1/2" blade) 1", weight 12 lbs., 18"Lx16"Wx7"H, UL approved. Includes: internal cord storage, 4-1/2" wet diamond blade included, rip guide, 45 degree rip guide, table stop.
M-D 48190 Portable Corded Tile Saw Dewalt DW758 Bench Grinder SAW MITER COMPOUND 10IN
SAW MITER COMPOUND 10IN
Our Price: $143.64
For cutting a variety of ceramic, porcelain, and stone tile, diamond coated edge to cut through hard material, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, carrying handle, tilting table allows for miter cuts. Adjustable rip guide. Specs: : Motor: 3/4 HP, 3.5 AMPS. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 13" x 14-3/4". Weight: 20lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-3/8".  Use replacement blade 5542840 The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 4.2 amps, 3/4HP, 3,600 rpm no load speed, 8" wheel diameter, 5/8" spindle diameter, adjustable tool resets, length 16", weight 39.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench. Large table for better material support with vice clamping system to secure work space. Thumb actuated positive stops for quick miter adjustments. Dust collector attachment minimizes airborne particles. Specs: 5,000 rpm, 0-52 degree miter angle to the left and right for increased flexibility, 0-45 degree bevel angle to the left to provide clean and accurate bevel cuts. Includes: 24T TCT saw blade, dust bag, vise assembly, 5mm hex bar wrench, and holder.
MITERSAW COMPOUND 10IN W/LASER Rockwell Bench Top Table Saw Leg Stand SAW COMPOUND MITER 10 INCH
Make precision miter cuts up to 45 degrees left and right with 9 stops at commonly used angles. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-Tipped blade installed, hold-down clamp, dust bag, two extension wings, blade wrench and two AAA batteries for laser. No load speed: 4600 rpm. Weighs 24 lbs. Aluminum main table with Quick release rip fence, 0-45 degree and blade bevel. Table size 26"  x 16". Max cutting depth at 90 degree = 3" ; Max cutting depth at 45 degree = 2-1/2". Accessories include: Spanner Wrench; Blade: 10" x5/8" x 24T; Rip Fence; 45 degree Miter Gauge; Push Stick. 10" Compound miter saw with 14 amp motor, 5,200 rpm. Maximum cut capacity at 90? degree miter - 4"x4" and 2"x6" dressed lumber. Maximum cut capacity at 45? miter - 2"x4" and 1"x6" dressed lumber. Maximum cut capacity at 45? bevel - 2"x4". Miters 45 to 90 degrees; bevels 0-45 degrees. Lightweight die cast aluminum base allows for weight of 36.6 lbs. Accepts SS9100 (087.7894) leg stand and material supports. Includes dust bag, work clamp, 40th carbide tipped blade and blade wrench.
MITERSAW SLIDING COMPOUND 10IN TABLE SAW 10INCH 15AMP W/STAND Rockwell RK7033 Drill Press
Sliding rail system for crosscutting stock up to 12" wide. Make precision miter cut up to 45 degrees left and right. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-tipped blade, hold-down clamp, dust bag, two extension wings, rear support foot bar, blade wrench and two AAA batteries for laser. 4800 rpm. Weighs 40 lbs. 15 amp motor. 4800 rpm. Extra large 24" x 20" die-cast aluminum table. Self-aligning rip fence automatically locks front and rear. Rips material up to 9-1/2" wide. Tool-free installation of blade guard and anti-kickback pawls. Oversized sliding miter gauge for miter cuts from 0-45 degrees. Bevel cut from 0-45 degrees. Rocker on/off switch. Optional sliding extension table expands rip capacity to 24". Includes: 40T Carbide-Tipped blade and heavy duty metal stand. Weighs 55 lbs. 2/3 HP induction motor for dependable performance. 5-speed setting for best results in metal, wood or plastic. Rack and pinion table height adjustment. 2" spindle travel; 1/2" chuck. Table bevels 0 to 45 degrees left and right. Keyed safety switch prevents accidental starting. Includes 1 chuck key and 1 allen key. Weighs 55.5 lbs.
Hitachi C10FCH2 Sliding Compound Corded Miter Saw with Laser Marker Rockwell Shop RK7136.1 Sliding Compound Corded Miter Saw with Leg Stands Skil Portable Table Saw Folding Stand
Laser marker system for increased cutting accuracy. Horizontal handle, Large table, large extended fence raises to 4" for cutting crown molding vertically. Thumb actuated positive stops for quick miter adjustments. Carbon brush access, allows user to replace brush as needed  Dust collector attachment, to minimize airborne particles. Max work piece capacity is 2-5/16" H, max. by 5-21/32" W. Specs: Single-phase 120VAC 60Hz motor, 0-52 degree miter angle range to the right and left, 0-48 degree bevel angle range to the left with adjustable bevel stops. Includes: 10" tct saw blade, vice assembly with knob bolt, 10mm box wrench, 4mm hex bar wrench. Metal legs attach directly to the saw base. Lightweight, die cast aluminum base for easy transport. Includes adjustable rollers to construct infeed/outfeed support. Depth stops on the rollers allow for unlimited cuts of the same length. Preset detents for setting accurate, repeated miter cuts. Bevel adjusts from 0 to 45 degrees to accommodate most bevel cuts. Includes: dust bag and work clamp. Features heavy-duty folding stand for fast setup and easy transport, 3-1/2" cut height capacity cuts through 4x materials, self-aligning rip fence, miter gauge guides work pieces when making cross cuts, EZ view measurements system for accurate settings and on-tool storage for all accessories and guarding system. Die-cast aluminum table with 20in x 26in table surface extends to 20 in. x 32 in. for longer work pieces. Specs: 5/8" arbor size, neg 2-degrees to 47-degrees bevel angle range, 6' grounded cord length, 2-1/2" depth of cut at 45-degrees, 3-1/2" depth of cut at 90 degrees, 5,000 no load rpm and 120V. Includes heavy-duty folding stand, carbide-tooth blade, 2 blade wrenches, self aligning rip fence and miter gauge.
Dewalt DW713 Single Bevel Compound Corded Miter Saw MK Diamond 157222 Table Corded Tile Saw Makita LS1040 Double Bevel Compound Corded Miter Saw
Two-piece aluminum and Lexan guard design protects against side impact. Lexan allows user to see the blade without the glare, providing a clean line of sight. Base handle design delivers increased comfort and portability to the end user. Positive bevel stops, cam lock miter handle, adjustable stainless detent plate and precise miter system. SPECIFICATIONS: 13 amp motor, 5,000 RPM, negative 3-degree to 48-degree bevel capacity, left and right miter capacity, machined base fence support, tall sliding fence and easy access bevel lock. Versatile and compact tabletop tile with high torque universal motor, high impact thermoplastic water reservoir, safeswitch prevents saw from being operated when locking key is removed. Specs: 120V, 5,500 RPM, blade capacity 7", arbor size 5/8", length of cut 12", depth of cut 2", LxWxH 17" x 14" x 12", weight 15 lbs. Includes: 7" wet cutting diamond blade, water pump, rip guide. Machined aluminum base ensures accurate cuts. Performs compound cutting operations. Dual post compound pivoting arm. Bevel cuts up to 45 degrees to the left. Miter cuts 0-45 degrees left and 0-52 degrees right. Specs: Blade diameters 10", arbor 5/8", max. cutting capacity (bevel/miter) 90 degree/90 degree 2-3/4" x 5-1/8", 45 degree/45 degree 1-3/8" x 3-5/8", no load rpm 4,600, length 18-23/32", weight (lbs.) 24.2. Includes: socket wrench, carbide tipped blade, dust bag and triangular rule.
M-D Building 48191 M-D Fusion Wet Tile Saws SAW TABLE 10IN 15AMP W/STAND  Dewalt DW715 Single Bevel Compound Corded Miter Saw
For cutting a variety of ceramic, porcelain, and stone tile, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, large carrying handles, tilting table allows for miter cuts. Heavy-duty cast aluminum cutting table, drain plug makes for easy water change, adjustable rip guide mounts securely. Secs: Motor: 1 HP, 6.25 Amps. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 18" x 22". Weight: 33lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-1/16".  Use replacement blade 554.2840 10" table saw with folding leg stand. Powerful 15 amp motor. 4,800 rpm for heavy duty performance. Large cast aluminum table extends from 20" deep - 21 wide to 37" wide. Rip capacity 26" on the right side of the blade; 8-3/4" on the left side. Cut capacity 3" at 90? and 2" at 45?. Quick release rip fence adjusts easily and provides sturdy accurate cuts. Unique folding legs allow the user to easily transport the saw on the job. Wheels built in to the saw allow for easy transport using the right leg as a handle. Includes push stick, miter gauge, blade guard, rip fence blade wrench and 24th carbide blade. Weighs 55 lbs. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree to the left and 0-3 degree to the right for increased capacity. 0-50 degree left and right miter capacity for greater versatility. Cam lock miter handle with miter detent override deliver quick, accurate miter angles. 4-hardened steel bevel stops at 0, 33.9, 45 and 48 degrees. Lightweight with built-in carry handle for easy portability. STANDARD EQUIPMENT: Carbide blade, extension kit, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 4,000 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 5-1/4" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat, 6-1/2" horizontal capacity crown molding lying flat, 2 x 8" for 45 degree bevel cut capacity (dimensional lumber), 2 x 8" for 90 degree cross-cut capacity (dimensional lumber), 2 x 8" max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6 dimensional lumber max width for 45 degree miter cut capacity, 42 lbs. tool weight. Stand Not Included.
Hitachi C12FDH Dual Compound Miter Saw QEP 83200 Corded Bridge Saw Hitachi C8FSE Single Bevel Sliding Compound Corded Miter Saw
Laser marker system accurately indicates where the blade will cut on the material and can be easily adjusted to the right or the left of the cut mark depending upon the user preference. Powerful 15 amp motor with 1,950 watts of output power smoothly powers through hardwoods with ease. Elastomer compound coats the horizontal handle, reducing vibration, while adding comfort and preventing slippage. Tall, pivoting aluminum fence that stands at a height of 5-1/8" allows crown molding to be cut vertically for convenience. Large base provides better support and balance to prevent material from warping. Externally accessible carbon brushes allow for quick and easy maintenance to prolong tool life. Miter scale ranges from 0-52 degrees, both to the right and left, for a broader range of cuts. Miter angles can be quickly adjusted using Hitachi's thumb actuated positive stops. Bevel scale ranges from 0-48 degrees to the right and left allowing the material to stay in place while the saw head flips to make opposing cuts. After major bevel angle is secured, micro-bevel adjustment knob can be used to dial-in to a precise angle without the weight of the saw head compromising the accuracy. Weighs 46.3 lbs. Use to cut marble, granite, porcelain, stone and tile. Dual internal water delivery system for maximum dispersion. Adjustable pivoting rail allows easy angle positioning from 90? to 45?. Angle/rip guide for consistent cuts. Automatic thermal overload protection prevents saw from overheating. Child-proof, locking on/off switch and key for safety. Power cords are encapsulated in a protective tube and attached to a flexible rod; keeps the cutting table safe and clear. Specs: motor: 1 HP, 120V-60Hz/9.5 Amps, 1100 watts, rpm: 3420 rpm, 8" blade capacity, 5/8" arbor, rip cuts 24" tile, diagonal cut on 18" tile, depth of cut: 1-3/8", dimensions: 37" L x 18" W x 47-1/2" H (w/legs), weight 82.32 lbs ( w/legs). Includes: transport handle and fold-out stand with wheels, 8" porcelain rated continuous rim wet diamond blade, high volume water pump and angle/rip cutting guide. Electronic speed control, positive miter stops for quick adjustments, adjustable pivot fence, splinter guard, externally replaceable carbon brushes, dust collector attachment, precise compound cuts, easy-to-read measurements and quick settings, Linear ball bearing slide system, vertical handle with elastomer grip. Specs: 5,500 RPM, 8-1/2" blade diameter, 5/8" arbor size, bevel angle range: (Right) 0-5 degrees, (Left) 0-48 degrees, miter angle range: (Right) 0-57 degrees, (Left) 0-45 degrees, miter detent stops: (R & L) 15, 22.5, 31.6, 45, degrees, cross cut capacity (90 degrees) 2-9/16"x12", size 21-27/32"Wx31-3/32"Lx19-3/32"H, weighs 31 lbs. Includes: 8-1/2" TCT saw blade, dust bag, vice assembly, box wrench, sub fence.
Dewalt DW716 Double Bevel Compound Corded Miter Saw SAW MITER SLIDE COMPOUND 10IN TABLE SAW 10IN WORM DRIVE
TABLE SAW 10IN WORM DRIVE
Our Price: $375.94
Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree with positive stops at 0, 33.9, 45 and 48 degree both left and right allowing user to flip the saw not the material. Back fence design delivers ability to cut 2 x 10" dimensional lumber at 90 degrees and 2 x 8" at 45 degrees. Precise miter system and machined base fence support, innovative gearbox and belt-drive design for increased cutting capacity. Lightweight, head lock-down pine and built-in carrying handle. Cam lock miter handle with detent override. Designed for use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path. STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 3,600 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat (10" with back fence), 6-1/2" horizontal capacity crown molding lying flat,  2 x 8" (2 x 10" with back fence) left and right for 45 degree bevel cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) for 90 degree cross-cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6" (2 x 8" with back fence)  dimensional lumber max width for 45 degree miter cut capacity. 44 lbs. tool weight. Stand Not Included. 15 AMP motor tackles tough cutting jobs with ease. Zero rear clearance slide system. Ergonomic upfront bevel lock for quick and easy adjustments of bevel angles. Tool-less, adjustable laser marker for cutting accuracy. Positive stops with miter detent override for faster transitions between miter angles. Equipped with LED light for added visibility. 0-60 degree miter angle to the right and 0-55 degree miter angle to the left, 0-48 degree bevel angle range to the right and left. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 13 mm wrench, and vice assembly. SPECIFICATIONS: 15 AMP belt driven motor, pivoting fence, no-load speed of 3,200 RPM. This wood cutting portable Worm Drive Table Saw is specifically designed for ripping. With the power and torque to tackle difficult cuts, bogging down is a thing of the past. 3-1/2" depth of cut and 25" rip capacity are big enough to rip plywood sheets in half. It also features a Dual-Field motor and smooth start-up for a saw that runs cooler and lasts longer. Weighs 49 lbs.
SAW MITER W/BATT W/CHARGER 20V SAW TABLE BARE 60V MAX 8-1/4IN MK Diamond 160028 Corded Tile Saw
Utilizes 20 volt Max Battery pack which provides on average, 183 cuts of 2x4 pine or 275 cuts of 3-1/4 pine baseboard. Integrated XPS cross system provides adjustment free cut line indication for better accuracy and visibility. Capacity to cut up to 3-5/8" nested crown and 3-1/2 base vertically. Will cut 2x8 lying flat. Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Oversized bevel scale makes bevel angle adjustments accurate and easy. Compact, lightweight design (31.6 lbs) allows for easy transport and storage. Cam lock miter handle delivers quick and accurate miter angles. Precise miter system and machined base fence support optimized durability and cutting accuracy. 7-1/4" blade diameter. No load speed: 3750 rpm. Includes battery, charger, carbide blade, user's guide, blade wrench and material clamp. Maximized for accuracy, capacity and run-time. The brushless motor delivers the power to cut all common materials. 24" of rip capacity for ripping 4 x 8 plywood or OSB sheets. The rack and pinion fence allows for fast, easy adjustments. Power-loss reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position. Site-Pro Modular Guarding system allows for tool free adjustments of the guarding. Metal roll cage base offers greater durability than plastic bases. Table coating reduces friction for smoother cutting. Table coating reduces friction for smoother cutting. 5/8" arbor size. 1-3/4" depth of cut at 45 degrees. Weighs 45 lbs. Includes table saw, carbide blade, non-thru cut riving knife, push stick, miter gauge, blade guard, rip fence and (2) blade wrenches. Wet cutting tile saw. High torque, universal motor. Runs on standard house current and draws only 5 amps at 120 volts. Engineered for cutting ceramic, travertine and slate. MK Safe-switch prevents saw from being operated when locking key is removed. Chrome guide-bar and linear bearing assembly ensures accurate tracking and alignment. Single piece zinc-plated steel frame for rigidity, strength and durability. Hinged blade guard for easy blade changes. Fully submersible, thermally protected water pump. High impact removable thermoplastic water reservoir will not rust or bend out shape. 7" blade capacity. Includes 7" diamond blade, water pump, wrenches and rip guide. Depth of cut 2"; length of cut 18"; diagonally cuts 13" tile. Dimensions of saw: 33"L x 18-1/2"W x 12-5/8"H.
Dewalt DWE7480 Table Saw Rockwell Portable Table Saw Trolley Stand MK Diamond 159943 Corded Tile Saw
Compact 10" job site table say with Site-Pro modular guarding system. Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate. 24" of rip capacity, easily cuts a variety of larger shelving and trim materials. Site-Pro modular guarding system allows for tool free adjustments of the guarding components appropriate for each application. 15 amp 4800 rpm motor quickly rips through hardwoods with ease. On board storage provides easy access to the Site-Pro guarding components and push stick when not in use. Metal roll cage base offers greater durability than plastic bases. Blade can be adjusted 0-45 degrees for bevel applications. Weighing only 48 lbs., the table saw can easily be moved on and off the job. Rear feet adjust to level the saw on uneven work surfaces. Dust port allows for 2-1/2" vacuum hook up and minimizes clean up. 24T carbide blade enhances cut quality and prolongs blade life. Table coating reduces friction for smoother cutting. Includes: Miter gauge, push stick, 10" carbide blade and blade guard. (DW7450 Stand sold separately Orgill sku 573.9974) Laser indicator for consistent accuracy. Cuts 4x4 in one pass. Base of the saw incorporates a sturdy fold-down trolley stand with wheels, onboard accessory storage and can be rolled from one jobsite to another by using the outstretched leg as a pull handle. The stand also features an adjustable leg extension for set-up on uneven surfaces. Specs: no-load speed of 5000 rpm, overall table dimensions are 28-1/2"x19" with a 30" rip capacity to the right and 11" on the left, depth of cut is 3-9/16" at 90 degrees and 2-9/16" at 45 degrees, dado width is 1/2" and  weighs 74 lbs. Includes: a rip fence, miter gauge, push stick, riving knife and sawdust collection bag. The powerful 7.4 amp, high-torque motor has maintenance-free, self-lubricating pinion and gear-box assembly. Tilting head allows for precise 45 degree miter cuts and variable height cutting head allows for plunge cutting. Sliding aluminum die-cast cutting table rips 18" tile and diagonally cuts 13" tiles. Linear bearing and chrome plated guide-bar assembly ensure precise cutting. The frame is single piece zinc-plated steel for rigidity, strength and durability. Hinged blade guard allows for easy blade changes. Motor incorporates the heavy duty on/off MK-Safeswitch and a built-in water pump receptacle. Removable thermoplastic water reservoir, 7" diamond blade, submersible water pump and rip guide are all included. Weight 33 pounds. Dimensions: 33" long x 19" wide x 20" high. CSA approved.
Makita LS1018 Dual Slide Compound Miter Saw SAW TABLE 60V W/BATT/CHARGER  SAW MITER SLDNG COMPOUND 12IN
Large cutting capacity in a compact design and less weight at only 43.7 lbs. for job site portability. Powerful 13.0 amp direct drive motor requires less maintenance and delivers 4,300 rpm. Cuts up to 12" at 90 degrees and 8-1/2" at 45 degrees. Linear ball bearing system engineered to deliver "dead-on" accurate cuts. Rear handle bevel lock is easily accessible and adjusts 0-45 degrees (left and right) with positive stops at 0 degrees, 45 degrees (left and right).  Soft start feature for smooth start-ups. Ergonomic rubberized D-handle design for better fit and added comfort. Large precision machined aluminum base supports material for more efficient cutting. Electric brake for maximum productivity. See-thru blade guard system for greater visibility of blade and line of cut. Oversized trigger switch for better fit, added comfort and easier operation. Includes extension wings for supporting long work pieces. Ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general contractors and more. Includes: (1) 10" 40T Miter saw blade, (1) triangle rule for miter saws, (1) vice assembly, (1) dust bag assembly, (1) extension wing and (1) wrench 13mm. This table saw is maximized for accuracy, capacity and run-time. The brushless motor delivers the power to cut all materials. Rack and pinion telescoping fence rails make fence adjustments smooth and accurate and provides the capacity to rip 4 x 8 sheet goods. Runs off of 20V/60V Flexvolt battery system for maximum portability. Power-loss reset prevents accidental re-starts following a power disruption when the switch is left in the "on" position. On board storage for guard, fence, wrenches and miter gauge. 24" of rip capacity for ripping 4 x 8 plywood or OSB sheets. Site-Pro modular guarding system allows for tool free adjustment of the guarding. Metal roll cage base offer greater durability than plastic bases. Table coating reduces friction for smoother cutting. Depth of cut at 45 degrees 1-3/4". Max width to left of blade 12". Tool weight 48 lbs. Includes: (1) 60 volt Max Table Saw, (1) Non-Thru Cut Riving Knife, (1) 20 volt/60 volt Max Flexvolt battery, (1) push stick, (1) Fast charger, (1) blade guard, (2) blade wrenches, (1) rip fence and (1) miter gauge.
Dewalt DWE7490X Table Saw SAW MITRE DUAL BEVEL 12IN 120V Dewalt DW734 Portable Reversible Corded Planer
Rack and pinion telescoping fence rail make fence adjustments fast, smooth and accurate. Material support can be sued for narrow rip cuts. 28-1/2" of rip capacity easily cuts a variety of larger shelving and trim material. On board storage provides easy access to the blade guard assembly, fence, riving knife, push stick, miter gage, wrenches and cord wrap when not in use. Compact folding stand. Blade guard assembly allows for tool free adjustments of the guard for different applications. Flip over fence, allows for narrow rip cuts. Telescoping fence rails retract to create a small portable package. Features a 15.0 amp high torque motor with the power to cut pressure-treated lumber and hardwoods. 2-1/2" dust collection port easily connects to a vacuum for efficient dust extraction. 3-1/8" depth of cut at 90 and 2-1/4" at 45. No load speed 4800 rpm. 21-7/8" x 26-3/8" table provides ideal material support. Includes: 10" 24-tooth carbide blade, folding table saw stand, miter gauge, push stick, folding stand, rip fence, 2x blade wrenches and blade guard assembly. The DHS716 12" (305mm) 120 volt Max Compound Miter Saw with top handle delivers power and cutting capacity with the portability and convenience of a cordless tool. Flexible power for corded or cordless use. CutLine Blade positioning system delivers adjustment free cutline indicator. Includes the 12" Compound Miter Saw, blade, blade changing wrench, dust bag and a  120 volt AC adapter (Batteries And Dual Port Fast Charger Sold Separately). 45 degree bevel cut capacity; 45 degree miter cut capacity; 90 degree cross-cut capacity. Arbor size: 5/8" (1") IN. Weighs only 44 lbs. 4-column carriage lock for reduced snipe. Extra-long in-feed and out-feed tables provide 33-1/2" of material support. 3-knife cutter- head provides 96 cuts per inch. Material removal gauge and thickness scale for accurate cuts. Turret depth stop allows easy return to most frequently used depths. STANDARD EQUIPMENT: Dust hood. SPECIFICATIONS:  15 amp, 120-Volt AC motor, 10,000 RPM, 1/8" max depth of cut, 6" depth capacity. Feeds 26' per minute. 80 lb. weight.
Dewalt DW717 Double Bevel Sliding Compound Corded Miter Saw SAW TABLE W/STAND ROLLING 10IN SAW MITER SLDG CMPD W/LSR 10IN
Cross cut positive stop for optimal cutting position. XPS Laser Compatible. Tall sliding fence for optimized material support. Bevel detent system with 7 hard stops gives you accurate, repeatable cuts. Adjustable stainless steel miter plate. Cam lock miter system. Sliding fence that supports up to 6" base molding to the left of the blade & up to 3 1/2" to the right of the blade. Machined base fence insures blade perpendicularity to fence. SPECIFICATIONS: Blade Diameter: 10"; Bevel Capacity: 0 degrees - 48 degrees; Miter Capacity: 60 Degrees left, 51 degrees right; Crosscut Capacity at 0 degrees: 2" x 14"; Crosscut Capacity at 45 degrees: 2" x 12"; Vertical Capacity: 6" base molding, 6-1/4" crown molding; Amps: 15 amps; Net Weight: 51 lbs. Stand Not Included. Jobsite table saw with folding rolling stand. Engineered for rip-sawing and cross-cutting or ordinary wood, hardwood, plywood and composite wood materials. Soft start function reduces noise and recoil at start-up. Electric brake halts rotation of brake within seconds. Overload protection automatically shuts off motor. Bevel range of 0 degree to 45 degree for cuts ranging from 3-1/8" to 2-1/4". Easy adjustments for blade height or angle. 2-1/2" rear dust port can connect to a shop vac or duct collection system. On-tool accessory storage. 15 amp motor. No load speed 4,500 rpm. 28-3/4" x 22" table extension. Telescoping table extension supports 35" of ripping capacity to the right and 22" to the left.  Stable and durable fold and roll stand with large 8" rubber, all terrain treaded wheels. Includes 10" carbide tipped blade, blade guard assembly, anti-kickback pawl assembly, miter gauge assembly, push stick, rip fence assembly, outfeed support assembly, (2) blade wrenches, 5mm hex bar wrench, 4mm hex bar wrench, and 2.5mm hex bar wrench. Large cutting capacity in a compact design with less weight at only 57.9 lbs. Powerful 15.0 amp direct drive motor requires less maintenance and delivers 3,200 rpm. Large-sized aluminum base improves stability of material for efficient cutting. Unique 2-steel rail sliding system offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (5-1/4?), crown molding (6-5/8? nested), and crosscut a 4" x12" at 90 degrees. The saw miters 0 to 60 degrees left and right, with positive stops at 0, 15, 22.5, 31.6, 45 and 60 degrees (left or right). The bevel lock allows for easy access and quick adjustments from 0 to 48 degrees (left and right). Includes: (1) 10" x 5/8?60T Micro-polished Miter saw blade, (1) triangle rule, (1) vertical vice, (1) dust bag, (1) Hex wrench.
Hitachi C10FSBP4 Double Bevel Sliding Compound Corded Miter Saw TABLE SAW 1-KEY KIT 8-1/4IN   Hitachi C10FSHPS Double Bevel Sliding Compound Corded Miter Saw
Positive angle stoppers for easy adjustment of teeth, turn table position for miter cutting (at the right and left of the 0-degree center setting, at 15,22.5, 31.6 and 45-degree settings). High sub fence. Legibly labeled angle scale and bevel scale. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for smooth, accurate cutting, fine surface finish and low noise operation. Poly V-belt and motor driving system for longer service life. STANDARD EQUIPMENT: 1 each: Vise Assembly, dust bag, 10mm box wrench, 255mm (10") TCT saw blade. SPECIFICATIONS: 10" diameter, 120V, 12 Amp, 1,400W max. output, 3,800 RPM, soft start and speed control. Max cutting capacities: 0-degree (right angle), miter cut 45-degree (left/right), miter right 57-degree, bevel cut 45-degree (left), bevel cut 45-degree (right), miter left/right 45-degree plus bevel left 45-degree, miter right 45-degree plus bevel right 45-degree. Miter cutting range: 0-45 degree left, 0-57 degree right. Bevel cutting range: 0-45 right and left. 20-3/4W x 41-1/2"L x 24-1/4"H. 43 lbs. tool weight. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 Red Lithium high output HD12.0 battery delivers unmatch run-time in all applications. The rack and pinion fence system maintains accuracy and allows for quick adjustments. On board storage for accessories. An all metal frame provides durability for daily jobsite use. Compatible with ONE-KEY, this is the industry?s first Table Saw that wirelessly connects to a smart phone to track and manage a tool?s performance and location. ONE-KEY, provides full visibility to how and where tools are being used across your network of jobs and users. The app will track all ONE-KEY compatible devices within 100' range of your phone. If your tool is lost or stolen, render it useless by sending a remote command to the tool to shut itself off the next time it comes within range of any ONE-KEY app. Specs: 6300 PRM, 8-1/4" blade size, 2-1/2" cut depth at 90 degrees, 1-3/4" cut depth at 45 degrees, 47 degrees max bevel, 5/8" arbor size, 41.6 lbs tool weight. Includes: (1) 18 volt M18 FUEL 8-1/4" Table Saw with One-Key, (1) N18 Red Lithium high output battery pack, M18 & M12 rapid charger, (1) anti kick back pawls, (1) blade, (1) blade wrench, (1) guard, (1) miter gauge and (1) riving kit. 12 AMP belt driven motor with soft start and overload protection. Adjustable laser guide for precise cutting. Soft Start feature reduces noise and recoil during start-up. Electronic speed control keeps RPMs constant as load varies. Linear ball bearing slide system for precision and durability. Left and right positive stops on miter gauge located at 0, 15, 22.5, 31.6, and 45 degrees. Dust collection system collects 100% more dust than previous models. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 10 mm box wrench, and vice assembly. SPECIFICATIONS: 12 AMP belt driven motor, pivoting fence, no-load speed of 3,800 RPM.
Dewalt DW735 2-Speed Portable Corded Planer MITER SAW KIT 10IN M18 9.0BATT Dewalt DWS780 Double Bevel Sliding Compound Corded Miter Saw
Automatic carriage lock for reduction of movement that causes snipe without need for manual engagement by user. 2-speed gear box allows user to change feed speed to optimize cuts per inch at 96 or 79 CPI. Fan assisted chip ejection vacuums chips off the cutter-head and exhausts them out of the machine. Material removal gauge and extra-large thickness scale for accurate cuts. Extra-large turret depth stop. STANDARD EQUIPMENT: Dust hose adapter, dust ejection chute. SPECIFICATIONS:  15- amp, 120-Volt AC motor, 10,000 RPM, 1/8" Max depth of cut 1/8", 6" depth/13" width capacity 6". Width capacity 13". Feeds 14' or 26' feet per minute. Milwaukee Powerstate brushless motor provides more corded cutting performance, power, more  run-time and longer life. Dual Bevel with 9 detents and easy access bevel lever. Top and side carrying handles for maximum portability. Detent override for easily setting miter locations outside of detents. The RedLink Plus Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection and productivity. Easy access to change blade. Durable RedLithium battery pack delivers more run-time, power and longer battery life with up to 400 cuts per charge. Maximum miter capacity 50/60. Includes: M18 Fuel Dual Bevel Sliding Compound Miter saw, (1) M18 RedLithium High Demand 9.0 battery pack, (1) M18 and M12 Rapid charger, (1) Blade Wrench, (1) Carbide Tipped Blade, (1) Clamp and (1) Dust bag. Adjustable stainless steel miter detent plate with 10-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. Single lever action double bevel design allows saw to easily bevel left and right 0-48 degree with positive stops at 0, 22.5, 33.9 and 45 degree in both directions permitting user to flip the saw and not the material. Back fence design delivers ability to cut 2 x 16" dimensional lumber at 90 degrees and 2 x 12" at 45 degrees. Precise miter system and machined base fence support deliver increased cutting accuracy. Innovative gearbox and belt-drive design for increased vertical cutting capacity. Miters 60 degrees to the left and 50 degrees to the right. Dual horizontal steel rails with clamping mechanism and linear ball bearings. Camlock miter handle with detent override. Compact and lightweight design for quick, easy transport and storage. For use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path.  STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15 amps, 3,800 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 16" horizontal capacity baseboard lying flat, 11-1/4" horizontal capacity crown molding lying flat,  2 x 14" (2 x 16" with back fence) 45-degree bevel cut capacity (dimensional lumber),  2 x 14" (2 x 16" with back fence) for 90-degree cross-cut capacity (dimensional lumber),  16" for 90-degree cross-cut capacity (max width), 2 x 12" max width for 45-degree miter-cut capacity (max height), 2 x 12" for 45-degree miter-cut capacity (max width). 53 lbs. tool weight. Stand Not Included.
Bosch Table Saw Stand Dewalt DWE7491RS Table Saw SAW MITER SLIDING 12IN 120V
The Smart Guard System is the first ever quick and easy-to-use modular blade guard, anti-kickback pawls and riving knife system; provides superior control over the material and maximum visibility while cutting. Engineered for maximum trueness, the 'Squarelock' Rip Fence glides along the rail at a finger's touch or locks into place for solid and consistent cutting performance. Easy set up and take down of your table saw; heavy-duty construction and 8" pneumatic wheels allow the Gravity-Rise stand to handle the toughest jobsites. Integrated Sub-base increases tool life by handling jobsite abuse, while protecting the table saw's base. Built-in sub-base and tabletop carry handles add to the saw's portability from jobsite to jobsite. On tool storage for all saw attachments and tools. Soft Start and 'Constant Response' Circuitry for quiet and smoother start-up, reduced start-up torque and maintaining speed under load. Exclusive Arbor Lock for single wrench blade changes. INCLUDES: 10" Worksite Table Saw; 10" 40-Tooth Carbide Tip Saw Blade; Blade Wrench; Hex Key; Sliding Miter Gauge; 'Gravity-Rise'Table Saw Stand with Pneumatic Wheels; Smart Guard System. Jobsite table saw with rolling stand. Rack and pinion telescoping fence system make fence adjustments fast, smooth and accurate. Material support can be used for narrow rip cuts. 32-1/2" rip capacity easily cuts a variety of larger shelving and trim materials. On board storage system provides easy access to the blade guard assembly, fence, riving knife, miter gage, wrenches, push stick and cord wrap when not in use. Rolling stand designed for easy set up and breakdown with ideal stability. Telescoping fence rails retract to create a small portable package. Flip over ripping fence allows for narrow rip cuts. 15 amp motor quickly rips through hardwoods with ease. 2-1/2" dust collection port easily connects to a vacuum for efficient dust extraction. 3-1/8" depth of cut at 90 and 2-1/4" at 45. No load speed 4800 rpm. 21-7/8" x 26-3/8" table provides superior material support. Includes: 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches and blade guard assembly. 120 volt Max Double Bevel Sliding Compound Miter Saw with CutLine delivers capacity, accuracy, power, ease of use and the durability of a corded tool with the portability and convenience of a cordless tool. CutLine blade positioning system delivers accurate line of sight to be cut. Includes the 120 volt AC adaptor. (60 Volt Max Lithium Ion Batteries And Fast Charger Sold Separately).
SAW MITER COMPOUND 12IN BRSHLS Milwaukee 6955-20 Double Bevel Sliding Compound Corded Miter Saw Dewalt D24000 Professional Corded Tile Saw
The 12" (305mm) 120V max compound miter saw delivers the power and cutting capacity that end users have come to expect from Dewalt corded miter saws with the portability and convenience of a cordless. Run time up to 289 cross cuts in baseboard along with the best in class vertical capacity against sliding fence. Tool height 26"; Tool length 32"; Tool weight 44 lbs. No load speed 3,800 rpm. Kit includes: (1) 12" (305mm) Compound miter saw, (1) Dual port fast charger, (1) blade, (1) 120V AC adapter, (2) 60V Max Lithium Ion batteries, (1) blade change wrench and (1) dust bag. The Miter Angle Digital Readout provides repeatable accuracy to 0.1 degree. Miter Angle Fine Adjust with Detent Override makes it simple to dial in precise miter angles. Dual Integral Jobsite Lights fully illuminate the work piece and cut line from either side of the blade. The powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start maintains constant cutting speed under load and decreases start up head movement. The Integral Dust channel captures up to 75 percent of the dust and debris cut. SPECIFICATIONS: Amps:  15.0; No Load Speed:  3,200 RPM; Blade Diameter:  12"; Arbor Size:  5/8" or 1"; Miter Range:  55 degrees  Left to 60 degrees  Right; Bevel Range:  48 degrees  Left to 48 degrees  Right; Miter Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 55 degrees; Right-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 60 degrees; Bevel Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees  Right-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees. Tool Weight  65 lbs. INCLUDES: Carbide Tipped Blade; Dust Bag; Blade Wrench. Integrated cantilevering rail/cart system allows for 24" ripping capacity, 18" tile on diagonal, stainless steel rail system is integrated into the saw frame, integrated 45/22.5 degree miter feature for quick angled cuts, plunge feature, adjustable dual water nozzles, rear and side water attachments help contain water run-off and blade spray, removable cutting cart for easy cleaning, 5 gallon water pan, edge guide with 2-position,45/90, degree guide, will cut hard materials such as porcelain and stone. Specs: 15.0Amps, blade diameter 10", max rip capacity 24" tile, diagonal cut capacity 18" tile, max depth of cut 3-1/8", pan material, ABS plastic, removable water containment tray, 34"Lx26"W(housing only), weight 69 lbs.
SAW SLIDNG MITER 12IN BRSHLS  Diamond Products 65020 Corded Tile Saw
This double bevel sliding compound miter saw offers flexible power options; corded for unlimited run time or cordless for portability powered by Dewalt brushless motor technology. Accuracy is delivered through adjustable miter scale with 11 positive stops and visibility bevel scale the CutLine blade positioning system. Up to 289 cross cuts in 3-1/4" base molding. Compact design weighs only 56 lbs. Includes: (1) DHS 790 Miter saw, (1) Dual port fast charger, (2) 60 volt Max Lithium Ion batteries, (1) blade wrench, (1) 12" blade, (1) DCA 120 volt Max corded power supply and (1) dust bag. Portable, light weight, with easy clean water tray and liquid cooled bearing housing, blade guard includes brush for additional blade cooling protection and overspray. Solid steel frame with convenient carrying handles. Specs: 15amp/115V, rip cut up to 20", diagonal cut to 14", up to 10" blade capacity  with 5/8" arbor, dimensions 39"Lx24"Wx24"H, weighs 43 lbs. Includes: 10" blade, water pump and 45 degree and 90 degree rip guide/miter block.
   
 
1