Home > POWER TOOLS & ACC > POWER TOOLS > BENCH & STATIONARY > POWER MITRE BOXES
Sort By:
1
DRILL BIT BUL-MATRL 1/8 X 4.5 Irwin 4935105 Multi-Material Jobber Length Drill BIT DRILL M/PURPS 5/32X4X6IN
With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and cast iron. Can also be used in hammer drills. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
Irwin 4935106 Multi-Material Jobber Length Drill BIT DRILL GLASS & TILE 1/8IN  Irwin 4935107 Multi-Material Jobber Length Drill
High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and cast iron. Can also be used in hammer drills. Carbide spear point with sharpened edges for in applications such as glass, mirror and ceramic Cuts perfectly round holes without chipping or breaking the material. All sizes 3/16" and larger have 3 flats on the shank for a better grip on the drill chuck. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and cast iron. Can also be used in hammer drills.
BIT DRILL M/PURPS 3/16X4X6IN  S-B MC06 Multi-Construction Jobber Length Drill DRILL BIT BUL-MATRL 5/32 X 4
Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. Steep flute with ribs for optimal dust removal, softened shank for aggressive griping power and customized carbide geometry optimized to handle a variety of material. Can be used in rotary and impact mode in concrete without bit change; drills into many grades of tiles, from granite to porcelain. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.
DRILL BIT BUL-MATRL 3/16 X 4.5 Irwin 4935108 Multi-Material Jobber Length Drill BIT DRILL GLASS / TILE 3/16IN
With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and cast iron. Can also be used in hammer drills. Carbide spear point with sharpened edges for in applications such as glass, mirror and ceramic Cuts perfectly round holes without chipping or breaking the material. All sizes 3/16" and larger have 3 flats on the shank for a better grip on the drill chuck.
DRILL BIT BUL-MATRL 1/4 X 4.75 BIT DRILL M/PURPS 1/4X4X6IN   Irwin 4935109 Multi-Material Jobber Length Drill
With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and cast iron. Can also be used in hammer drills.
Irwin 1792767 Multi-Material Jobber Length Drill Irwin 1792768 Multi-Material Jobber Length Drill BIT DRILL GLASS / TILE 1/4IN
For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. Carbide spear point with sharpened edges for in applications such as glass, mirror and ceramic Cuts perfectly round holes without chipping or breaking the material. All sizes 3/16" and larger have 3 flats on the shank for a better grip on the drill chuck.
Artu 01010 Drill Bit Artu 01012 Drill Bit DRILL BIT BUL-MATRL 5/16 X 5.2
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.
Dremel 9924 Replacement Engraving Point Artu 01020 Drill Bit Artu 1022 Drill Bit
Replaceable bit for the 290 Dremel (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Bosch GT Series 4-Piece Precision Ground Glass and Tile Bit BIT DRILL GLASS / TILE 5/16IN BIT DRILL M/PURPS 5/16X4X6IN
Bosch Glass and Tile Bit, 4-Piece, Precision Ground, Series: GT Series, 1/8 in Diameter, 2 in Overall Length, 1/8 in Shank, 3 Flat Shank, Tungsten Carbide Cutting Edge, For Relief Holes for Glass Cutting, Bathroom/Shower Installs, Towel/Shower, Rods and Soap Dishes, Drilling and Fastening Mirrors and Setting Concrete Screws-In Tile Carbide spear point with sharpened edges for in applications such as glass, mirror and ceramic Cuts perfectly round holes without chipping or breaking the material. All sizes 3/16" and larger have 3 flats on the shank for a better grip on the drill chuck. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
Artu 01030 Drill Bit Irwin 1792769 Multi-Material Jobber Length Drill DRILL BIT BUL-MATRL 3/8 X 5.25
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.
Artu 1032 Drill Bit Black & Decker 16900 Glass and Tile Drill Bit Irwin 1792770 Multi-Material Jobber Length Drill
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble.
BIT DRILL M/PURPS 3/8X4X6IN   Artu 1040 Drill Bit Hanson 50508 Economy Glass and Tile Drill Bit
Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite and china.
Black & Decker 16901 Glass and Tile Drill Bit Irwin 1792771 Multi-Material Jobber Length Drill Hanson 50512 Economy Glass and Tile Drill Bit
Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills. For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble. Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite and china.
Black & Decker 16902 Glass and Tile Drill Bit Artu 1042 Drill Bit Hanson 50516 Economy Glass and Tile Drill Bit
Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite and china.
Artu 1050 Drill Bit Hanson 50524 Economy Glass and Tile Drill Bit Hanson 50520 Economy Glass and Tile Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite and china. Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite and china.
Artu 1052 Drill Bit Black & Decker 16903 Glass and Tile Drill Bit BIT DRILL M/PURPS 1/2X4X6IN
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills. Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.
Artu 1060 Drill Bit Hanson 50532 Economy Glass and Tile Drill Bit Black & Decker 16904 Glass and Tile Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite and china. Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills.
Artu 1062 Drill Bit BIT ST GLS/TILE 4PC 1/8-5/16IN Artu 1425 Porcelain Tile Bit
For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Carbide spear point with sharpened edges for in applications such as glass, mirror and ceramic Cuts perfectly round holes without chipping or breaking the material. All sizes 3/16" and larger have 3 flats on the shank for a better grip on the drill chuck. Set includes: 1/8", 3/16", 1/4" and 5/16" drills. For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM.
Black & Decker 16905 Glass and Tile Drill Bit Artu 1430 Porcelain Tile Bit Artu 1070 Drill Bit
Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills. For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Dremel 9929 Engraving Point Artu 1435 Porcelain Tile Bit Artu 1075 Drill Bit
Use this point for continuous duty or commercial work. Can also be used for decorative engraving. Use on steel, chrome, titanium, granite, and other hard substrates. Use with Dremel 290 (619.9319) engraver. For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Artu 1440 Porcelain Tile Bit Artu 1445 Porcelain Tile Bit Artu 1150 Drill Bit
For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM. For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Dremel 290 Electric Engraver Kit Artu 1155 Drill Bit Artu 1160 Drill Bit
Stroke adjustment dial regulates engraving depth from fine lines to deep grooves. Replaceable carbide points lets you engrave on most surfaces. Soft grip adds extra comfort and control. Letter/number template helps etch words and numbers. Light and compact design provides comfortable use for precision engraving performance. Amperage: 0.2; Hertz: 60; Speed: 7,200 (spm). Includes Engraver tool, Letter/number template and 9924 Carbide point. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Artu 1165 Drill Bit Artu 1170 Drill Bit Artu 1080 Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Artu 1175 Drill Bit Artu 1180 Drill Bit Artu 1185 Drill Bit
For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. For rotary or percussion drilling. Chrome vanadium steel shank with cobalt and tungsten carbide tip that withstands temperatures up to 1900 degrees Fahrenheit. Special negative back grinding enables tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, cast metals, hardened steel, granite, marble, woods, and plastic with a filing action rather than a cutting action. No center punch required; eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.
Rockwell RK7323 Table Saw SAW MITER COMPOUND 10IN       MITERSAW COMPOUND 10IN W/LASER
SAW MITER COMPOUND 10IN
Our Price: $143.64
Cuts wood, metal, plastic, aluminum and ceramic tile with ease. Sets up in seconds. Weighs only 13 lbs. 5.5 amp motor; 2,800 spm. 3/4" stroke length using a "T" shank jig saw blade. Includes blade holder, (5) T-shank assorted blades and allen key. Large table for better material support with vice clamping system to secure work space. Thumb actuated positive stops for quick miter adjustments. Dust collector attachment minimizes airborne particles. Specs: 5,000 rpm, 0-52 degree miter angle to the left and right for increased flexibility, 0-45 degree bevel angle to the left to provide clean and accurate bevel cuts. Includes: 24T TCT saw blade, dust bag, vise assembly, 5mm hex bar wrench, and holder. Make precision miter cuts up to 45 degrees left and right with 9 stops at commonly used angles. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-Tipped blade installed, hold-down clamp, dust bag, two extension wings, blade wrench and two AAA batteries for laser. No load speed: 4600 rpm. Weighs 24 lbs.
Rockwell Corded Scroll Saw SAW COMPOUND MITER 10 INCH    SwitchBlade 49-22-5100 Self-Feed Drill Bit Set
Powerful 15 amp motor with 1.2 amp no load speed makes this a great machine for the workshop or the jobsite. Throat depth=16"; Stroke=4/5";  Cutting depth=2"; Table bevel =0-45 degrees left; Weight: 30.8 lbs; Dust blower; Dust port; Blade guard; Variable speed.  Accessories include ; Blade guard; Blade holder; Allen key; 2 blades:(1) 15 TPI;(1) 18TPI; 10" Compound miter saw with 14 amp motor, 5,200 rpm. Maximum cut capacity at 90? degree miter - 4"x4" and 2"x6" dressed lumber. Maximum cut capacity at 45? miter - 2"x4" and 1"x6" dressed lumber. Maximum cut capacity at 45? bevel - 2"x4". Miters 45 to 90 degrees; bevels 0-45 degrees. Lightweight die cast aluminum base allows for weight of 36.6 lbs. Accepts SS9100 (087.7894) leg stand and material supports. Includes dust bag, work clamp, 40th carbide tipped blade and blade wrench. Aggressive feed screw allows the bit to pull through the wood faster; each bit comes standard with a second replacement blade with size and model number engraved on each bit. Kit includes: (4) Switchblade self-feed bits (1-3/8", 1-1/2", 2-1/8", & 2-9/16") (1) Universal Quik-Lok extension (5-1/2" x 7/16"), (1) each replacement blades (1-3/8", 1-1/2", 2-1/8",  2-9/16"), (4) feed screws, (4) setscrews; (1) hex wrench, removable storage case and carrying case.
Rockwell RK7453 Corded Band Saw MITERSAW SLIDING COMPOUND 10IN Rockwell RK7033 Drill Press
Aluminum working table with blade guide adjustment, work light and blade quick tension adjustment. Max cutting depth=3-1/8"; Throat depth=9"; Table Size=11-13/16" x 11-13/16"; Table Bevel=0-45 degree. Accessories include: Parallel Guide; Miter Gauge; Hex key. 59-1/2" blade included. Sliding rail system for crosscutting stock up to 12" wide. Make precision miter cut up to 45 degrees left and right. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-tipped blade, hold-down clamp, dust bag, two extension wings, rear support foot bar, blade wrench and two AAA batteries for laser. 4800 rpm. Weighs 40 lbs. 2/3 HP induction motor for dependable performance. 5-speed setting for best results in metal, wood or plastic. Rack and pinion table height adjustment. 2" spindle travel; 1/2" chuck. Table bevels 0 to 45 degrees left and right. Keyed safety switch prevents accidental starting. Includes 1 chuck key and 1 allen key. Weighs 55.5 lbs.
Hitachi C10FCH2 Sliding Compound Corded Miter Saw with Laser Marker Rockwell Shop RK7136.1 Sliding Compound Corded Miter Saw with Leg Stands Dewalt DW713 Single Bevel Compound Corded Miter Saw
Laser marker system for increased cutting accuracy. Horizontal handle, Large table, large extended fence raises to 4" for cutting crown molding vertically. Thumb actuated positive stops for quick miter adjustments. Carbon brush access, allows user to replace brush as needed  Dust collector attachment, to minimize airborne particles. Max work piece capacity is 2-5/16" H, max. by 5-21/32" W. Specs: Single-phase 120VAC 60Hz motor, 0-52 degree miter angle range to the right and left, 0-48 degree bevel angle range to the left with adjustable bevel stops. Includes: 10" tct saw blade, vice assembly with knob bolt, 10mm box wrench, 4mm hex bar wrench. Metal legs attach directly to the saw base. Lightweight, die cast aluminum base for easy transport. Includes adjustable rollers to construct infeed/outfeed support. Depth stops on the rollers allow for unlimited cuts of the same length. Preset detents for setting accurate, repeated miter cuts. Bevel adjusts from 0 to 45 degrees to accommodate most bevel cuts. Includes: dust bag and work clamp. Two-piece aluminum and Lexan guard design protects against side impact. Lexan allows user to see the blade without the glare, providing a clean line of sight. Base handle design delivers increased comfort and portability to the end user. Positive bevel stops, cam lock miter handle, adjustable stainless detent plate and precise miter system. SPECIFICATIONS: 13 amp motor, 5,000 RPM, negative 3-degree to 48-degree bevel capacity, left and right miter capacity, machined base fence support, tall sliding fence and easy access bevel lock.
Makita LS1040 Double Bevel Compound Corded Miter Saw Dewalt DW715 Single Bevel Compound Corded Miter Saw Hitachi C12FDH Dual Compound Miter Saw
Machined aluminum base ensures accurate cuts. Performs compound cutting operations. Dual post compound pivoting arm. Bevel cuts up to 45 degrees to the left. Miter cuts 0-45 degrees left and 0-52 degrees right. Specs: Blade diameters 10", arbor 5/8", max. cutting capacity (bevel/miter) 90 degree/90 degree 2-3/4" x 5-1/8", 45 degree/45 degree 1-3/8" x 3-5/8", no load rpm 4,600, length 18-23/32", weight (lbs.) 24.2. Includes: socket wrench, carbide tipped blade, dust bag and triangular rule. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree to the left and 0-3 degree to the right for increased capacity. 0-50 degree left and right miter capacity for greater versatility. Cam lock miter handle with miter detent override deliver quick, accurate miter angles. 4-hardened steel bevel stops at 0, 33.9, 45 and 48 degrees. Lightweight with built-in carry handle for easy portability. STANDARD EQUIPMENT: Carbide blade, extension kit, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 4,000 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 5-1/4" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat, 6-1/2" horizontal capacity crown molding lying flat, 2 x 8" for 45 degree bevel cut capacity (dimensional lumber), 2 x 8" for 90 degree cross-cut capacity (dimensional lumber), 2 x 8" max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6 dimensional lumber max width for 45 degree miter cut capacity, 42 lbs. tool weight. Stand Not Included. Laser marker system accurately indicates where the blade will cut on the material and can be easily adjusted to the right or the left of the cut mark depending upon the user preference. Powerful 15 amp motor with 1,950 watts of output power smoothly powers through hardwoods with ease. Elastomer compound coats the horizontal handle, reducing vibration, while adding comfort and preventing slippage. Tall, pivoting aluminum fence that stands at a height of 5-1/8" allows crown molding to be cut vertically for convenience. Large base provides better support and balance to prevent material from warping. Externally accessible carbon brushes allow for quick and easy maintenance to prolong tool life. Miter scale ranges from 0-52 degrees, both to the right and left, for a broader range of cuts. Miter angles can be quickly adjusted using Hitachi's thumb actuated positive stops. Bevel scale ranges from 0-48 degrees to the right and left allowing the material to stay in place while the saw head flips to make opposing cuts. After major bevel angle is secured, micro-bevel adjustment knob can be used to dial-in to a precise angle without the weight of the saw head compromising the accuracy. Weighs 46.3 lbs.
Hitachi C8FSE Single Bevel Sliding Compound Corded Miter Saw Dewalt DW716 Double Bevel Compound Corded Miter Saw SAW MITER SLIDE COMPOUND 10IN
Electronic speed control, positive miter stops for quick adjustments, adjustable pivot fence, splinter guard, externally replaceable carbon brushes, dust collector attachment, precise compound cuts, easy-to-read measurements and quick settings, Linear ball bearing slide system, vertical handle with elastomer grip. Specs: 5,500 RPM, 8-1/2" blade diameter, 5/8" arbor size, bevel angle range: (Right) 0-5 degrees, (Left) 0-48 degrees, miter angle range: (Right) 0-57 degrees, (Left) 0-45 degrees, miter detent stops: (R & L) 15, 22.5, 31.6, 45, degrees, cross cut capacity (90 degrees) 2-9/16"x12", size 21-27/32"Wx31-3/32"Lx19-3/32"H, weighs 31 lbs. Includes: 8-1/2" TCT saw blade, dust bag, vice assembly, box wrench, sub fence. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree with positive stops at 0, 33.9, 45 and 48 degree both left and right allowing user to flip the saw not the material. Back fence design delivers ability to cut 2 x 10" dimensional lumber at 90 degrees and 2 x 8" at 45 degrees. Precise miter system and machined base fence support, innovative gearbox and belt-drive design for increased cutting capacity. Lightweight, head lock-down pine and built-in carrying handle. Cam lock miter handle with detent override. Designed for use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path. STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 3,600 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat (10" with back fence), 6-1/2" horizontal capacity crown molding lying flat,  2 x 8" (2 x 10" with back fence) left and right for 45 degree bevel cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) for 90 degree cross-cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6" (2 x 8" with back fence)  dimensional lumber max width for 45 degree miter cut capacity. 44 lbs. tool weight. Stand Not Included. 15 AMP motor tackles tough cutting jobs with ease. Zero rear clearance slide system. Ergonomic upfront bevel lock for quick and easy adjustments of bevel angles. Tool-less, adjustable laser marker for cutting accuracy. Positive stops with miter detent override for faster transitions between miter angles. Equipped with LED light for added visibility. 0-60 degree miter angle to the right and 0-55 degree miter angle to the left, 0-48 degree bevel angle range to the right and left. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 13 mm wrench, and vice assembly. SPECIFICATIONS: 15 AMP belt driven motor, pivoting fence, no-load speed of 3,200 RPM.
SAW MITER W/BATT W/CHARGER 20V Makita LS1018 Dual Slide Compound Miter Saw SAW MITER SLDNG COMPOUND 12IN
Utilizes 20 volt Max Battery pack which provides on average, 183 cuts of 2x4 pine or 275 cuts of 3-1/4 pine baseboard. Integrated XPS cross system provides adjustment free cut line indication for better accuracy and visibility. Capacity to cut up to 3-5/8" nested crown and 3-1/2 base vertically. Will cut 2x8 lying flat. Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Oversized bevel scale makes bevel angle adjustments accurate and easy. Compact, lightweight design (31.6 lbs) allows for easy transport and storage. Cam lock miter handle delivers quick and accurate miter angles. Precise miter system and machined base fence support optimized durability and cutting accuracy. 7-1/4" blade diameter. No load speed: 3750 rpm. Includes battery, charger, carbide blade, user's guide, blade wrench and material clamp. Large cutting capacity in a compact design and less weight at only 43.7 lbs. for job site portability. Powerful 13.0 amp direct drive motor requires less maintenance and delivers 4,300 rpm. Cuts up to 12" at 90 degrees and 8-1/2" at 45 degrees. Linear ball bearing system engineered to deliver "dead-on" accurate cuts. Rear handle bevel lock is easily accessible and adjusts 0-45 degrees (left and right) with positive stops at 0 degrees, 45 degrees (left and right).  Soft start feature for smooth start-ups. Ergonomic rubberized D-handle design for better fit and added comfort. Large precision machined aluminum base supports material for more efficient cutting. Electric brake for maximum productivity. See-thru blade guard system for greater visibility of blade and line of cut. Oversized trigger switch for better fit, added comfort and easier operation. Includes extension wings for supporting long work pieces. Ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general contractors and more. Includes: (1) 10" 40T Miter saw blade, (1) triangle rule for miter saws, (1) vice assembly, (1) dust bag assembly, (1) extension wing and (1) wrench 13mm.
SAW MITRE DUAL BEVEL 12IN 120V Dewalt DW717 Double Bevel Sliding Compound Corded Miter Saw SAW MITER SLDG CMPD W/LSR 10IN
The DHS716 12" (305mm) 120 volt Max Compound Miter Saw with top handle delivers power and cutting capacity with the portability and convenience of a cordless tool. Flexible power for corded or cordless use. CutLine Blade positioning system delivers adjustment free cutline indicator. Includes the 12" Compound Miter Saw, blade, blade changing wrench, dust bag and a  120 volt AC adapter (Batteries And Dual Port Fast Charger Sold Separately). 45 degree bevel cut capacity; 45 degree miter cut capacity; 90 degree cross-cut capacity. Arbor size: 5/8" (1") IN. Weighs only 44 lbs. Cross cut positive stop for optimal cutting position. XPS Laser Compatible. Tall sliding fence for optimized material support. Bevel detent system with 7 hard stops gives you accurate, repeatable cuts. Adjustable stainless steel miter plate. Cam lock miter system. Sliding fence that supports up to 6" base molding to the left of the blade & up to 3 1/2" to the right of the blade. Machined base fence insures blade perpendicularity to fence. SPECIFICATIONS: Blade Diameter: 10"; Bevel Capacity: 0 degrees - 48 degrees; Miter Capacity: 60 Degrees left, 51 degrees right; Crosscut Capacity at 0 degrees: 2" x 14"; Crosscut Capacity at 45 degrees: 2" x 12"; Vertical Capacity: 6" base molding, 6-1/4" crown molding; Amps: 15 amps; Net Weight: 51 lbs. Stand Not Included. Large cutting capacity in a compact design with less weight at only 57.9 lbs. Powerful 15.0 amp direct drive motor requires less maintenance and delivers 3,200 rpm. Large-sized aluminum base improves stability of material for efficient cutting. Unique 2-steel rail sliding system offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (5-1/4?), crown molding (6-5/8? nested), and crosscut a 4" x12" at 90 degrees. The saw miters 0 to 60 degrees left and right, with positive stops at 0, 15, 22.5, 31.6, 45 and 60 degrees (left or right). The bevel lock allows for easy access and quick adjustments from 0 to 48 degrees (left and right). Includes: (1) 10" x 5/8?60T Micro-polished Miter saw blade, (1) triangle rule, (1) vertical vice, (1) dust bag, (1) Hex wrench.
Hitachi C10FSBP4 Double Bevel Sliding Compound Corded Miter Saw Dewalt Corded Scroll Saw Hitachi C10FSHPS Double Bevel Sliding Compound Corded Miter Saw
Positive angle stoppers for easy adjustment of teeth, turn table position for miter cutting (at the right and left of the 0-degree center setting, at 15,22.5, 31.6 and 45-degree settings). High sub fence. Legibly labeled angle scale and bevel scale. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for smooth, accurate cutting, fine surface finish and low noise operation. Poly V-belt and motor driving system for longer service life. STANDARD EQUIPMENT: 1 each: Vise Assembly, dust bag, 10mm box wrench, 255mm (10") TCT saw blade. SPECIFICATIONS: 10" diameter, 120V, 12 Amp, 1,400W max. output, 3,800 RPM, soft start and speed control. Max cutting capacities: 0-degree (right angle), miter cut 45-degree (left/right), miter right 57-degree, bevel cut 45-degree (left), bevel cut 45-degree (right), miter left/right 45-degree plus bevel left 45-degree, miter right 45-degree plus bevel right 45-degree. Miter cutting range: 0-45 degree left, 0-57 degree right. Bevel cutting range: 0-45 right and left. 20-3/4W x 41-1/2"L x 24-1/4"H. 43 lbs. tool weight. Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16" x 23-3/4". Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Included. 12 AMP belt driven motor with soft start and overload protection. Adjustable laser guide for precise cutting. Soft Start feature reduces noise and recoil during start-up. Electronic speed control keeps RPMs constant as load varies. Linear ball bearing slide system for precision and durability. Left and right positive stops on miter gauge located at 0, 15, 22.5, 31.6, and 45 degrees. Dust collection system collects 100% more dust than previous models. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 10 mm box wrench, and vice assembly. SPECIFICATIONS: 12 AMP belt driven motor, pivoting fence, no-load speed of 3,800 RPM.
MITER SAW KIT 10IN M18 9.0BATT Dewalt DWS780 Double Bevel Sliding Compound Corded Miter Saw SAW MITER SLIDING 12IN 120V
Milwaukee Powerstate brushless motor provides more corded cutting performance, power, more  run-time and longer life. Dual Bevel with 9 detents and easy access bevel lever. Top and side carrying handles for maximum portability. Detent override for easily setting miter locations outside of detents. The RedLink Plus Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection and productivity. Easy access to change blade. Durable RedLithium battery pack delivers more run-time, power and longer battery life with up to 400 cuts per charge. Maximum miter capacity 50/60. Includes: M18 Fuel Dual Bevel Sliding Compound Miter saw, (1) M18 RedLithium High Demand 9.0 battery pack, (1) M18 and M12 Rapid charger, (1) Blade Wrench, (1) Carbide Tipped Blade, (1) Clamp and (1) Dust bag. Adjustable stainless steel miter detent plate with 10-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. Single lever action double bevel design allows saw to easily bevel left and right 0-48 degree with positive stops at 0, 22.5, 33.9 and 45 degree in both directions permitting user to flip the saw and not the material. Back fence design delivers ability to cut 2 x 16" dimensional lumber at 90 degrees and 2 x 12" at 45 degrees. Precise miter system and machined base fence support deliver increased cutting accuracy. Innovative gearbox and belt-drive design for increased vertical cutting capacity. Miters 60 degrees to the left and 50 degrees to the right. Dual horizontal steel rails with clamping mechanism and linear ball bearings. Camlock miter handle with detent override. Compact and lightweight design for quick, easy transport and storage. For use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path.  STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15 amps, 3,800 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 16" horizontal capacity baseboard lying flat, 11-1/4" horizontal capacity crown molding lying flat,  2 x 14" (2 x 16" with back fence) 45-degree bevel cut capacity (dimensional lumber),  2 x 14" (2 x 16" with back fence) for 90-degree cross-cut capacity (dimensional lumber),  16" for 90-degree cross-cut capacity (max width), 2 x 12" max width for 45-degree miter-cut capacity (max height), 2 x 12" for 45-degree miter-cut capacity (max width). 53 lbs. tool weight. Stand Not Included. 120 volt Max Double Bevel Sliding Compound Miter Saw with CutLine delivers capacity, accuracy, power, ease of use and the durability of a corded tool with the portability and convenience of a cordless tool. CutLine blade positioning system delivers accurate line of sight to be cut. Includes the 120 volt AC adaptor. (60 Volt Max Lithium Ion Batteries And Fast Charger Sold Separately).
SAW MITER COMPOUND 12IN BRSHLS Milwaukee 6955-20 Double Bevel Sliding Compound Corded Miter Saw SAW SLIDNG MITER 12IN BRSHLS
The 12" (305mm) 120V max compound miter saw delivers the power and cutting capacity that end users have come to expect from Dewalt corded miter saws with the portability and convenience of a cordless. Run time up to 289 cross cuts in baseboard along with the best in class vertical capacity against sliding fence. Tool height 26"; Tool length 32"; Tool weight 44 lbs. No load speed 3,800 rpm. Kit includes: (1) 12" (305mm) Compound miter saw, (1) Dual port fast charger, (1) blade, (1) 120V AC adapter, (2) 60V Max Lithium Ion batteries, (1) blade change wrench and (1) dust bag. The Miter Angle Digital Readout provides repeatable accuracy to 0.1 degree. Miter Angle Fine Adjust with Detent Override makes it simple to dial in precise miter angles. Dual Integral Jobsite Lights fully illuminate the work piece and cut line from either side of the blade. The powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start maintains constant cutting speed under load and decreases start up head movement. The Integral Dust channel captures up to 75 percent of the dust and debris cut. SPECIFICATIONS: Amps:  15.0; No Load Speed:  3,200 RPM; Blade Diameter:  12"; Arbor Size:  5/8" or 1"; Miter Range:  55 degrees  Left to 60 degrees  Right; Bevel Range:  48 degrees  Left to 48 degrees  Right; Miter Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 55 degrees; Right-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 60 degrees; Bevel Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees  Right-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees. Tool Weight  65 lbs. INCLUDES: Carbide Tipped Blade; Dust Bag; Blade Wrench. This double bevel sliding compound miter saw offers flexible power options; corded for unlimited run time or cordless for portability powered by Dewalt brushless motor technology. Accuracy is delivered through adjustable miter scale with 11 positive stops and visibility bevel scale the CutLine blade positioning system. Up to 289 cross cuts in 3-1/4" base molding. Compact design weighs only 56 lbs. Includes: (1) DHS 790 Miter saw, (1) Dual port fast charger, (2) 60 volt Max Lithium Ion batteries, (1) blade wrench, (1) 12" blade, (1) DCA 120 volt Max corded power supply and (1) dust bag.
   
 
1