Home > POWER TOOLS & ACC > POWER TOOLS > BENCH & STATIONARY > BAND SAWS
Sort By:
1
ROTARY TOOL V-SPEED W/ACC     Dremel 7000-N/5 2-Speed Rotary Tool Kit Dremel 7300-N/8 Cordless Rotary Tool Kit
1001 household, hobby and project uses: cut, saw, sand, grind, drill, polish, buff, sharpen, clean and more. Variable speed: 8000 - 30,000 rpm. 1/8" Collet accepts all standard rotary tool accessories. Separate on/off and speed control switches. Spindle lock for quick bit changes. Rated voltage: 120V/60 Hz, 1.0 Amp, No load speed: 8000 - 30,000 RPM, Collet size: 1/8". Weighs only 1.2 lbs. 40 piece accessory set includes: (10) aluminum oxide grinding stones, (7) cut-off wheels, (8) sanding discs, (1) aluminum oxide grinding wheel, (1) 1/2" sanding drum, (3) sanding bands, (2) felt polishing wheels, (3) engraving cutters, (2) mandrels, (1) 1/8" (3mm) drill bit, (1) dressing stone, (1) wrench and (1) accessory storage case. Ready to go on a minute's notice. This 2-speed cordless alkaline tool is ideal for a variety of do-it-yourself jobs inside or out. Includes 5 accessories and a wrench. Rotates at 2 speeds: 6,000 rpm or 12,000 rpm. Weighs only 6 ounces. Requires 4 AA batteries, Not Included. Lightweight with two speeds and can be used with any Dremel accessory bit with up to a 1/8" shank. Specs: 6,500/13,000 RPM, weighs 9 oz. Includes: tool, (1) 3-hour battery charger, (1) 401 mandrel, (1) 432 1/2" 120 grit sanding band, (1) 414 small felt wheel, (1) silicon carbide grinding stone, (1) wrench.
North American Tool 51832 Corded Rotary Tool Kit Black & Decker RTX 3-Speed Rotary Tool Kit With Case Dremel 100-N/7 Corded Rotary Tool Kit
Specs: 10,000 - 32,000 rpm, 135 W, and 60 Hz. Includes 10 grinder stone, 2 diamond bits, 3 mandrel, 36 cutting disk, sanding drum, 3 sanding drum paper, 4 polishing wheel, 2 drill bits, collet, wet stone, 36 sanding paper and spanner. Gets the job done faster and won't bog down under load. Flip-Lock spindle lock for quick and easy accessory changes. Universal collet accepts all standard rotary tool accessories. Soft grip for no-slip comfort and control. Three speeds: 12,000 rpm. 24,000 rpm and 30,000 rpm for the best results for each job. Lightweight, single speed tool with ball bearing construction allow for cool running, quiet, smooth operation. Specs Cord length 6', speed 35,000 rpm, voltage 120 AC/50-60 Hz. Includes  Mandrel, coarse 1/2", sanding drum, dressing stone, heavy duty emery cut off wheel, 1/2" 120 grit sanding band, aluminum oxide grinding stone, silicon carbide grinding stone.
Dremel MultiPro 7700-1/15 Cordless Rotary Tool Kit Dremel 200-1/21 Corded Rotary Tool Kit Dremel 3000/300-1/24 Corded Rotary Tool Kit
Compact, lightweight, medium duty cordless with lawn mower and garden tool sharpening attachment, shaft lock for easy bit changing, removable battery with 3 hour charge time. Specs: 7.2V, 2-speed (10,000 and 20,000 RPM). Accepts accessories up to 1/8" shank, weighs 12 oz. Includes: battery, 3 hour charger, accessories, storage bag  and garden sharpener. Refer to model No. 757-01 for replacement battery pack. Multipurpose cutting guide attachment, used for multiple applications on a variety of materials. Specs: 15,000 or 35,000 RPM, voltage 120/AC, 50-60/Hz, 6 ft. cord. Includes: 21 genuine Dremel accessories. Lightweight, comfort grip housing with variable speed, circle cutter/straight edge guide. Specs: voltage 120/AC, 50-60/Hz, 5,000 to 35,000 RPM, 6 ft. cord. Includes: storage case and 24 accessories.
Dremel 8000-03 Cordless Rotary Tool Kit Dremel 4000-2/30 Corded Rotary Tool Kit Milwaukee 2460-21 M12 Cordless Rotary Tool Kits
8 volt Lithium-Ion cordless rotary tool is ideal for hands on projects around the home such as finishing, intricate sanding, polishing, cleaning, engraving and more. Variable speed control allows you to set the speed of the tool to match a particular accessory to the task at hand and is designed to be used with all Dremel accessories and most threaded attachments. Variable speed from 5,000 to 30,000 rpm to match the proper speed required. High capacity battery for longer run time. Comfort grip housing for easier handling and better tool control. Includes: 401 Mandrel, 402 Mandrel, 403 Bristle brush, 407 1/2" Drum sander, 414 Felt polishing wheel (2), 421 Polishing compound, 445 1/2" 240 Grit sanding band (2), 408 1/2" 60 Grit sanding band (3), 432 1/2" 120 Grit sanding band (3), 540 1-1/4" Cut-off wheel (3), 84922 Silicon carbide grinding stone, 932 Aluminum oxide grinding stone, 952 Aluminum oxide grinding stone and wrench. Variable speed for greater versatility. High performance motor for maximum performance at all speeds. Electronic feedback for consistent speed under load. Can be used with all Dremel accessories and attachments. Specs: Cord length 6', speed 5,000 to 35,000 rpm, voltage 120 AC/50-60 Hz, weight 18.8 oz. Includes: Dremel 4000 rotary tool, circle cutter/straight edge guide, sanding/grinding guide, storage case, quick start book. Compact and lightweight. Tool runs from 5,000-32,000 RPM. Managed by a variable speed dial for fluid control. 1/8" Collet is compatible with all 1/32" - 1/8" shank accessories providing the user access to any cutting, grinding, sanding and polishing solutions. Includes rotary tool, M12 Redlithium battery, 5 cutting wheels and mandrel, wrench and 30-minute charger and carrying case.
ROTARY TOOL VARIBLE SPEED     SAW MITER COMPOUND 10IN       MITERSAW COMPOUND 10IN W/LASER
ROTARY TOOL VARIBLE SPEED
Our Price: $114.60
SAW MITER COMPOUND 10IN
Our Price: $130.24
Allows tool-less and collet-less accessory changes with the inclusion of the three jaw chuck. The chuck accepts all Dremel accessory shank sizes for fast and convenient accessory changes without ever using a wrench. Featuring the all new Pivot Light, your projects are will lit with an optimum line of sight since the light pivots to direct illumination where you want it. Variable speed and electronic feedback circuitry. The slim, ergonomic body design provides a comfortable 360 degree grip zone no matter how you hold it for extended ease of use. The completely redesigned air flow system lets the Dremel 4300 run cool, quiet and smooth so completing projects are more enjoyable than ever. 6' cord. Variable speed: 5,000 - 35,000 rpm. Large table for better material support with vice clamping system to secure work space. Thumb actuated positive stops for quick miter adjustments. Dust collector attachment minimizes airborne particles. Specs: 5,000 rpm, 0-52 degree miter angle to the left and right for increased flexibility, 0-45 degree bevel angle to the left to provide clean and accurate bevel cuts. Includes: 24T TCT saw blade, dust bag, vise assembly, 5mm hex bar wrench, and holder. Make precision miter cuts up to 45 degrees left and right with 9 stops at commonly used angles. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-Tipped blade installed, hold-down clamp, dust bag, two extension wings, blade wrench and two AAA batteries for laser. No load speed: 4600 rpm. Weighs 24 lbs.
Dremel 4000-6/50 Corded Rotary Tool Kit SAW COMPOUND MITER 10 INCH    MITERSAW SLIDING COMPOUND 10IN
Variable speed rotary tool with a slim, ergonomic body provides a 360-degree grip zone for comfort and control in any grip position. Tool can use all existing Dremel accessories and attachments plus high-performance attachments to complete the widest range of projects. Specs: Amperage 1.6 amps, Cord Length 6 ft., Speed 5,000 to 35,000 RPM, Voltage 120 AC, 50-60 Hz,Weight (lbs.) 18.8 oz. Includes: 50 assorted accessories 10" Compound miter saw with 14 amp motor, 5,200 rpm. Maximum cut capacity at 90? degree miter - 4"x4" and 2"x6" dressed lumber. Maximum cut capacity at 45? miter - 2"x4" and 1"x6" dressed lumber. Maximum cut capacity at 45? bevel - 2"x4". Miters 45 to 90 degrees; bevels 0-45 degrees. Lightweight die cast aluminum base allows for weight of 36.6 lbs. Accepts SS9100 (087.7894) leg stand and material supports. Includes dust bag, work clamp, 40th carbide tipped blade and blade wrench. Sliding rail system for crosscutting stock up to 12" wide. Make precision miter cut up to 45 degrees left and right. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-tipped blade, hold-down clamp, dust bag, two extension wings, rear support foot bar, blade wrench and two AAA batteries for laser. 4800 rpm. Weighs 40 lbs.
Rockwell RK7453 Corded Band Saw Hitachi C10FCH2 Sliding Compound Corded Miter Saw with Laser Marker Rockwell Shop RK7136.1 Sliding Compound Corded Miter Saw with Leg Stands
Aluminum working table with blade guide adjustment, work light and blade quick tension adjustment. Max cutting depth=3-1/8"; Throat depth=9"; Table Size=11-13/16" x 11-13/16"; Table Bevel=0-45 degree. Accessories include: Parallel Guide; Miter Gauge; Hex key. 59-1/2" blade included. Laser marker system for increased cutting accuracy. Horizontal handle, Large table, large extended fence raises to 4" for cutting crown molding vertically. Thumb actuated positive stops for quick miter adjustments. Carbon brush access, allows user to replace brush as needed  Dust collector attachment, to minimize airborne particles. Max work piece capacity is 2-5/16" H, max. by 5-21/32" W. Specs: Single-phase 120VAC 60Hz motor, 0-52 degree miter angle range to the right and left, 0-48 degree bevel angle range to the left with adjustable bevel stops. Includes: 10" tct saw blade, vice assembly with knob bolt, 10mm box wrench, 4mm hex bar wrench. Metal legs attach directly to the saw base. Lightweight, die cast aluminum base for easy transport. Includes adjustable rollers to construct infeed/outfeed support. Depth stops on the rollers allow for unlimited cuts of the same length. Preset detents for setting accurate, repeated miter cuts. Bevel adjusts from 0 to 45 degrees to accommodate most bevel cuts. Includes: dust bag and work clamp.
Makita LS1040 Double Bevel Compound Corded Miter Saw Dewalt DW713 Single Bevel Compound Corded Miter Saw Evolution RAGE3 Multipurpose Sliding Compound Corded Miter Saw
Machined aluminum base ensures accurate cuts. Performs compound cutting operations. Dual post compound pivoting arm. Bevel cuts up to 45 degrees to the left. Miter cuts 0-45 degrees left and 0-52 degrees right. Specs: Blade diameters 10", arbor 5/8", max. cutting capacity (bevel/miter) 90 degree/90 degree 2-3/4" x 5-1/8", 45 degree/45 degree 1-3/8" x 3-5/8", no load rpm 4,600, length 18-23/32", weight (lbs.) 24.2. Includes: socket wrench, carbide tipped blade, dust bag and triangular rule. Two-piece aluminum and Lexan guard design protects against side impact. Lexan allows user to see the blade without the glare, providing a clean line of sight. Base handle design delivers increased comfort and portability to the end user. Positive bevel stops, cam lock miter handle, adjustable stainless detent plate and precise miter system. SPECIFICATIONS: 13 amp motor, 5,000 RPM, negative 3-degree to 48-degree bevel capacity, left and right miter capacity, machined base fence support, tall sliding fence and easy access bevel lock. Hi-torque gearbox reduces motor stresses, improving performance and durability. Cuts steel, aluminum, wood  and plastics easily, leaves no burr and offers an instantly workable finish, no coolant required and virtually no sparks are produced, 11-13/16" slide action. Compound tilt and slide mechanism offers a solution to almost all common applications, laser guidance, extra-large base, extendable fence guard for long workpieces. Specs: 230V or 110V/50Hz, 2000W (soft start), max depth cut (90 degrees): 3", (45 degrees miter): 1-1/2", (90 degrees miter): 11-13/16", (45 degrees miter): 8-1/4", no load speed-2500 min-1, dimensions are (HxWxL) 25"x20"x30", and weighs 41 lbs. Includes: vertical clamp, laser protector, plug, exhaust port, owner?s manual, dust bag, 5mm hex wrench, (2) extension supports, 6mm hex wrench, extension support stop, slide lock knob, table positioning handle w/thread collar, table locking knob, and blade.
Hitachi C12FDH Dual Compound Miter Saw Dewalt DW715 Single Bevel Compound Corded Miter Saw Hitachi C8FSE Single Bevel Sliding Compound Corded Miter Saw
Laser marker system accurately indicates where the blade will cut on the material and can be easily adjusted to the right or the left of the cut mark depending upon the user preference. Powerful 15 amp motor with 1,950 watts of output power smoothly powers through hardwoods with ease. Elastomer compound coats the horizontal handle, reducing vibration, while adding comfort and preventing slippage. Tall, pivoting aluminum fence that stands at a height of 5-1/8" allows crown molding to be cut vertically for convenience. Large base provides better support and balance to prevent material from warping. Externally accessible carbon brushes allow for quick and easy maintenance to prolong tool life. Miter scale ranges from 0-52 degrees, both to the right and left, for a broader range of cuts. Miter angles can be quickly adjusted using Hitachi's thumb actuated positive stops. Bevel scale ranges from 0-48 degrees to the right and left allowing the material to stay in place while the saw head flips to make opposing cuts. After major bevel angle is secured, micro-bevel adjustment knob can be used to dial-in to a precise angle without the weight of the saw head compromising the accuracy. Weighs 46.3 lbs. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree to the left and 0-3 degree to the right for increased capacity. 0-50 degree left and right miter capacity for greater versatility. Cam lock miter handle with miter detent override deliver quick, accurate miter angles. 4-hardened steel bevel stops at 0, 33.9, 45 and 48 degrees. Lightweight with built-in carry handle for easy portability. STANDARD EQUIPMENT: Carbide blade, extension kit, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 4,000 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 5-1/4" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat, 6-1/2" horizontal capacity crown molding lying flat, 2 x 8" for 45 degree bevel cut capacity (dimensional lumber), 2 x 8" for 90 degree cross-cut capacity (dimensional lumber), 2 x 8" max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6 dimensional lumber max width for 45 degree miter cut capacity, 42 lbs. tool weight. Stand Not Included. Electronic speed control, positive miter stops for quick adjustments, adjustable pivot fence, splinter guard, externally replaceable carbon brushes, dust collector attachment, precise compound cuts, easy-to-read measurements and quick settings, Linear ball bearing slide system, vertical handle with elastomer grip. Specs: 5,500 RPM, 8-1/2" blade diameter, 5/8" arbor size, bevel angle range: (Right) 0-5 degrees, (Left) 0-48 degrees, miter angle range: (Right) 0-57 degrees, (Left) 0-45 degrees, miter detent stops: (R & L) 15, 22.5, 31.6, 45, degrees, cross cut capacity (90 degress) 2-9/16"x12", size 21-27/32"Wx31-3/32"Lx19-3/32"H, weighs 31 lbs. Includes: 8-1/2" TCT saw blade, dust bag, vice assembly, box wrench, sub fence.
SAW MITER SLIDE COMPOUND 10IN Dewalt DW716 Double Bevel Compound Corded Miter Saw Makita LS1018 Dual Slide Compound Miter Saw
15 AMP motor tackles tough cutting jobs with ease. Zero rear clearance slide system. Ergonomic upfront bevel lock for quick and easy adjustments of bevel angles. Tool-less, adjustable laser marker for cutting accuracy. Positive stops with miter detent override for faster transitions between miter angles. Equipped with LED light for added visibility. 0-60 degree miter angle to the right and 0-55 degree miter angle to the left, 0-48 degree bevel angle range to the right and left. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 13 mm wrench, and vice assembly. SPECIFICATIONS: 15 AMP belt driven motor, pivoting fence, no-load speed of 3,200 RPM. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree with positive stops at 0, 33.9, 45 and 48 degree both left and right allowing user to flip the saw not the material. Back fence design delivers ability to cut 2 x 10" dimensional lumber at 90 degrees and 2 x 8" at 45 degrees. Precise miter system and machined base fence support, innovative gearbox and belt-drive design for increased cutting capacity. Lightweight, head lock-down pine and built-in carrying handle. Cam lock miter handle with detent override. Designed for use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path. STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 3,600 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat (10" with back fence), 6-1/2" horizontal capacity crown molding lying flat,  2 x 8" (2 x 10" with back fence) left and right for 45 degree bevel cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) for 90 degree cross-cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6" (2 x 8" with back fence)  dimensional lumber max width for 45 degree miter cut capacity. 44 lbs. tool weight. Stand Not Included. Large cutting capacity in a compact design and less weight at only 43.7 lbs. for job site portability. Powerful 13.0 amp direct drive motor requires less maintenance and delivers 4,300 rpm. Cuts up to 12" at 90 degrees and 8-1/2" at 45 degrees. Linear ball bearing system engineered to deliver "dead-on" accurate cuts. Rear handle bevel lock is easily accessible and adjusts 0-45 degrees (left and right) with positive stops at 0 degrees, 45 degrees (left and right).  Soft start feature for smooth start-ups. Ergonomic rubberized D-handle design for better fit and added comfort. Large precision machined aluminum base supports material for more efficient cutting. Electric brake for maximum productivity. See-thru blade guard system for greater visibility of blade and line of cut. Oversized trigger switch for better fit, added comfort and easier operation. Includes extension wings for supporting long work pieces. Ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general contractors and more. Includes: (1) 10" 40T Miter saw blade, (1) triangle rule for miter saws, (1) vice assembly, (1) dust bag assembly, (1) extension wing and (1) wrench 13mm.
SAW MITER W/BATT W/CHARGER 20V SAW MITER SLDNG COMPOUND 12IN Hitachi C10FSBP4 Double Bevel Sliding Compound Corded Miter Saw
Utilizes 20 volt Max Battery pack which provides on average, 183 cuts of 2x4 pine or 275 cuts of 3-1/4 pine baseboard. Integrated XPS cross system provides adjustment free cut line indication for better accuracy and visibility. Capacity to cut up to 3-5/8" nested crown and 3-1/2 base vertically. Will cut 2x8 lying flat. Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Oversized bevel scale makes bevel angle adjustments accurate and easy. Compact, lightweight design (31.6 lbs) allows for easy transport and storage. Cam lock miter handle delivers quick and accurate miter angles. Precise miter system and machined base fence support optimized durability and cutting accuracy. 7-1/4" blade diameter. No load speed: 3750 rpm. Includes battery, charger, carbide blade, user's guide, blade wrench and material clamp. Positive angle stoppers for easy adjustment of teeth, turn table position for miter cutting (at the right and left of the 0-degree center setting, at 15,22.5, 31.6 and 45-degree settings). High sub fence. Legibly labeled angle scale and bevel scale. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for smooth, accurate cutting, fine surface finish and low noise operation. Poly V-belt and motor driving system for longer service life. STANDARD EQUIPMENT: 1 each: Vise Assembly, dust bag, 10mm box wrench, 255mm (10") TCT saw blade. SPECIFICATIONS: 10" diameter, 120V, 12 Amp, 1,400W max. output, 3,800 RPM, soft start and speed control. Max cutting capacities: 0-degree (right angle), miter cut 45-degree (left/right), miter right 57-degree, bevel cut 45-degree (left), bevel cut 45-degree (right), miter left/right 45-degree plus bevel left 45-degree, miter right 45-degree plus bevel right 45-degree. Miter cutting range: 0-45 degree left, 0-57 degree right. Bevel cutting range: 0-45 right and left. 20-3/4W x 41-1/2"L x 24-1/4"H. 43 lbs. tool weight.
SAW MITRE DUAL BEVEL 12IN 120V Dewalt DW717 Double Bevel Sliding Compound Corded Miter Saw SAW MITER SLDG CMPD W/LSR 10IN
The DHS716 12" (305mm) 120 volt Max Compound Miter Saw with top handle delivers power and cutting capacity with the portability and convenience of a cordless tool. Flexible power for corded or cordless use. CutLine Blade positioning system delivers adjustment free cutline indicator. Includes the 12" Compound Miter Saw, blade, blade changing wrench, dust bag and a  120 volt AC adapter (Batteries And Dual Port Fast Charger Sold Separately). 45 degree bevel cut capacity; 45 degree miter cut capacity; 90 degree cross-cut capacity. Arbor size: 5/8" (1") IN. Weighs only 44 lbs. Cross cut positive stop for optimal cutting position. XPS Laser Compatible. Tall sliding fence for optimized material support. Bevel detent system with 7 hard stops gives you accurate, repeatable cuts. Adjustable stainless steel miter plate. Cam lock miter system. Sliding fence that supports up to 6" base molding to the left of the blade & up to 3 1/2" to the right of the blade. Machined base fence insures blade perpendicularity to fence. SPECIFICATIONS: Blade Diameter: 10"; Bevel Capacity: 0 degrees - 48 degrees; Miter Capacity: 60 Degrees left, 51 degrees right; Crosscut Capacity at 0 degrees: 2" x 14"; Crosscut Capacity at 45 degrees: 2" x 12"; Vertical Capacity: 6" base molding, 6-1/4" crown molding; Amps: 15 amps; Net Weight: 51 lbs. Stand Not Included. Large cutting capacity in a compact design with less weight at only 57.9 lbs. Powerful 15.0 amp direct drive motor requires less maintenance and delivers 3,200 rpm. Large-sized aluminum base improves stability of material for efficient cutting. Unique 2-steel rail sliding system offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (5-1/4?), crown molding (6-5/8? nested), and crosscut a 4" x12" at 90 degrees. The saw miters 0 to 60 degrees left and right, with positive stops at 0, 15, 22.5, 31.6, 45 and 60 degrees (left or right). The bevel lock allows for easy access and quick adjustments from 0 to 48 degrees (left and right). Includes: (1) 10" x 5/8?60T Micro-polished Miter saw blade, (1) triangle rule, (1) vertical vice, (1) dust bag, (1) Hex wrench.
Hitachi C10FSHPS Double Bevel Sliding Compound Corded Miter Saw MITER SAW KIT 10IN M18 9.0BATT Dewalt DWS780 Double Bevel Sliding Compound Corded Miter Saw
12 AMP belt driven motor with soft start and overload protection. Adjustable laser guide for precise cutting. Soft Start feature reduces noise and recoil during start-up. Electronic speed control keeps RPMs constant as load varies. Linear ball bearing slide system for precision and durability. Left and right positive stops on miter gauge located at 0, 15, 22.5, 31.6, and 45 degrees. Dust collection system collects 100% more dust than previous models. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 10 mm box wrench, and vice assembly. SPECIFICATIONS: 12 AMP belt driven motor, pivoting fence, no-load speed of 3,800 RPM. Milwaukee Powerstate brushless motor provides more corded cutting performance, power, more  run-time and longer life. Dual Bevel with 9 detents and easy access bevel lever. Top and side carrying handles for maximum portability. Detent override for easily setting miter locations outside of detents. The RedLink Plus Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection and productivity. Easy access to change blade. Durable RedLithium battery pack delivers more run-time, power and longer battery life with up to 400 cuts per charge. Maximum miter capacity 50/60. Includes: M18 Fuel Dual Bevel Sliding Compound Miter saw, (1) M18 RedLithium High Demand 9.0 battery pack, (1) M18 and M12 Rapid charger, (1) Blade Wrench, (1) Carbide Tipped Blade, (1) Clamp and (1) Dust bag. Adjustable stainless steel miter detent plate with 10-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. Single lever action double bevel design allows saw to easily bevel left and right 0-48 degree with positive stops at 0, 22.5, 33.9 and 45 degree in both directions permitting user to flip the saw and not the material. Back fence design delivers ability to cut 2 x 16" dimensional lumber at 90 degrees and 2 x 12" at 45 degrees. Precise miter system and machined base fence support deliver increased cutting accuracy. Innovative gearbox and belt-drive design for increased vertical cutting capacity. Miters 60 degrees to the left and 50 degrees to the right. Dual horizontal steel rails with clamping mechanism and linear ball bearings. Camlock miter handle with detent override. Compact and lightweight design for quick, easy transport and storage. For use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path.  STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15 amps, 3,800 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 16" horizontal capacity baseboard lying flat, 11-1/4" horizontal capacity crown molding lying flat,  2 x 14" (2 x 16" with back fence) 45-degree bevel cut capacity (dimensional lumber),  2 x 14" (2 x 16" with back fence) for 90-degree cross-cut capacity (dimensional lumber),  16" for 90-degree cross-cut capacity (max width), 2 x 12" max width for 45-degree miter-cut capacity (max height), 2 x 12" for 45-degree miter-cut capacity (max width). 53 lbs. tool weight. Stand Not Included.
Bosch GCM12SD Double Bevel Glide Corded Miter Saw SAW MITER SLIDING 12IN 120V   Milwaukee 6955-20 Double Bevel Sliding Compound Corded Miter Saw
Up front bevel lock lever and range selector knob, easy access controls for quick and accurate bevel settings, large 25-1/2" base with built in cast sliding extensions for 40" total length, 4-1/2" speed-track sliding fences for easy bevel set ups and increased crown molding cutting capacities. Specs: no load RPM 3,800, bevel angle range is 48 degree left/48 degree right, 12" blade diameter, miter angle range is 52 degree left/60 degree right, weighs 65 lbs.  Includes (1 each): 12" 60T blade, material clamp, dust bag. 120 volt Max Double Bevel Sliding Compound Miter Saw with CutLine delivers capacity, accuracy, power, ease of use and the durability of a corded tool with the portability and convenience of a cordless tool. CutLine blade positioning system delivers accurate line of sight to be cut. Includes the 120 volt AC adaptor. (60 Volt Max Lithium Ion Batteries And Fast Charger Sold Separately). The Miter Angle Digital Readout provides repeatable accuracy to 0.1 degree. Miter Angle Fine Adjust with Detent Override makes it simple to dial in precise miter angles. Dual Integral Jobsite Lights fully illuminate the work piece and cut line from either side of the blade. The powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start maintains constant cutting speed under load and decreases start up head movement. The Integral Dust channel captures up to 75 percent of the dust and debris cut. SPECIFICATIONS: Amps:  15.0; No Load Speed:  3,200 RPM; Blade Diameter:  12"; Arbor Size:  5/8" or 1"; Miter Range:  55 degrees  Left to 60 degrees  Right; Bevel Range:  48 degrees  Left to 48 degrees  Right; Miter Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 55 degrees; Right-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 60 degrees; Bevel Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees  Right-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees. Tool Weight  65 lbs. INCLUDES: Carbide Tipped Blade; Dust Bag; Blade Wrench.
SAW MITER COMPOUND 12IN BRSHLS SAW SLIDNG MITER 12IN BRSHLS
The 12" (305mm) 120V max compound miter saw delivers the power and cutting capacity that end users have come to expect from Dewalt corded miter saws with the portability and convenience of a cordless. Run time up to 289 cross cuts in baseboard along with the best in class vertical capacity against sliding fence. Tool height 26"; Tool length 32"; Tool weight 44 lbs. No load speed 3,800 rpm. Kit includes: (1) 12" (305mm) Compound miter saw, (1) Dual port fast charger, (1) blade, (1) 120V AC adapter, (2) 60V Max Lithium Ion batteries, (1) blade change wrench and (1) dust bag. This double bevel sliding compound miter saw offers flexible power options; corded for unlimited run time or cordless for portability powered by Dewalt brushless motor technology. Accuracy is delivered through adjustable miter scale with 11 positive stops and visibility bevel scale the CutLine blade positioning system. Up to 289 cross cuts in 3-1/4" base molding. Compact design weighs only 56 lbs. Includes: (1) DHS 790 Miter saw, (1) Dual port fast charger, (2) 60 volt Max Lithium Ion batteries, (1) blade wrench, (1) 12" blade, (1) DCA 120 volt Max corded power supply and (1) dust bag.
   
 
1