Home > POWER TOOLS & ACC > POWER TOOLS > BENCH & STATIONARY > TABLE SAWS
Choose a sub category:
ROTARY HOBBY TOOLS ROTARY HOBBY TOOLS SCROLL SAWS
SCROLL SAWS SCROLL SAWS SCROLL SAWS
ROTARY HOBBY TOOL ACCESSORIES ROTARY HOBBY TOOL ACCESSORIES TABLE SAWS
TABLE SAWS TABLE SAWS TABLE SAWS
BAND SAWS BAND SAWS BAND SAWS
BAND SAWS ENGRAVERS ENGRAVERS
BENCH TILE SAWS BENCH TILE SAWS BENCH TILE SAWS
BENCH TILE SAWS WOOD-BURNING TOOLS WOOD-BURNING TOOLS
POWER MITRE BOXES POWER MITRE BOXES POWER MITRE BOXES
POWER MITRE BOXES CUT OFF SAWS/CHOP SAWS CUT OFF SAWS/CHOP SAWS
CUT OFF SAWS/CHOP SAWS CUT OFF SAWS/CHOP SAWS DRILL PRESSES
DRILL PRESSES DRILL PRESSES DRILL PRESSES
BENCH SANDERS BENCH SANDERS BENCH SANDERS
BENCH SANDERS BENCH GRINDERS BENCH GRINDERS
BENCH GRINDERS BENCH GRINDERS SHARPENERS
SHARPENERS SHARPENERS SHARPENERS
PLANERS PLANERS PLANERS
PLANERS
Sort By:
1
Dremel 560 Cutting Bit Dremel 402 Mandrel Dremel 429 Felt Polishing Wheel
Makes fast clean cuts in drywall for electrical boxes, air vents and other wall features. Do not run in excess of 30,000 RPM. To be used with all cutting wheels, sanding discs and polishing wheels. Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM.
Dremel 432 Drum Sander Band Dremel 422 Felt Polishing Tip Dremel 408 Drum Sander Band
Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. Polishing point is made to take a semi-rough finish and polish it to a smooth finish on most ferrous metals, stones, glass and ceramics. Used with 401 mandrel. Do not run in excess of 30,000 RPM. Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM.
Dremel 430 Drum Sander Band Dremel 8193 Grinding Stone Dremel 480 Collet
Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237.
Dremel 83322 Grinding Stone Dremel 481 Collet Dremel 462 Polishing Point
Industrial abrasive made for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non ferrous metals or for working with conical and flat surfaces. Do not run in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237. Rubber polishing points are impregnated with abrasive and used on on ferrous metals to remove rough areas, small burrs and scratch marks. Point is ideal for cleaning and defining grooves.
Bosch Accessories 113 Engraving Cutters Dremel 932 Grinding Stone Dremel 952 Grinding Stone
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Specially designed for working with conic surfaces. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM.
Bosch 431  Oscillating Tool Accessories Dremel 561 Spiral Cutting Bit EZ-Lock 423E/423 Polishing Wheel
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8" shank. For rough shaping and smoothing wood and fiberglass. Ideal for removing rust from metal surfaces. Also ideal for shaping rubber surfaces. 1/4" bit diameter (6.4 mm). Pack of 6. Cuts wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. Do not run in excess of 30,000 RPM. Polish silverware to high luster, car detailing and restore door and window hardware. Compatible with all Dremel rotary tools, EZ402 EZ Lock mandrel and standard 402 mandrel (619.9400). Do not run in excess of 30,000 RPM.
Dremel 512E Finishing Abrasive Buff Dremel 540 Cut-Off Wheel BRUSH CARBON STEEL 3/4IN 2PK
For cleaning, light sanding and removing tarnish from brass. Use on metal, glass, wood, aluminum and plastics. For use with the EZ402 EZ lock mandrel (SKU #482.4447) or standard 402 mandrel (SKU #619.9400). Includes 2 fine 320 grit buffs. Easily cuts off slots bolts, screws, sheet metal, thin wood and plastic, trim castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No. 402 mandrel. Ideal for cleaning and removing rust and corrosion from items made of brass, copper, gold or other soft ferrous metals. Perfect for getting into hard to reach places like slots. You can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces.
BRUSH CARBON STEEL 1/2IN 2PK  Dremel 107 Engraving Cutter Dremel 407 Drum Sander Band
Ideal for cleaning and removing rust and corrosion. Use on items made of brass, copper, gold or other soft ferrous metals such as tools, door knobs, automobile parts and electrical contacts. Can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces and getting into hard to reach places like slots. Dremel Engraving Cutter, 3/32 in Diameter, 9-9/16 in Length, Ball Shape, 1/8 in Arbor/Shank, Carbon Steel, Silver, Applicable Materials: Wood, Fiberglass, Plastic and Soft Metals, 3/32 in Shank Diameter, Single Cut Tooth, For Engraving, Carving and Routing Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM.
Dremel 454 Precision Ground Sharpening Stone Dremel 455 Precision Ground Sharpening Stone Bosch 90930 Carbon Motor Brush
Used for sharpening chain saw blades, quickly and easily. Used for sharpening chain saw blades, quickly and easily. For No. 275, No. 285, and No. 395 Type 3, 4 and 5 Moto-Tools.
Dremel 953 Grinding Stone Dremel 453 Precision Ground Sharpening Stone DISC SANDING 240GRIT
DISC SANDING 240GRIT
Our Price: $5.92
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. Used for sharpening chain saw blades, quickly and easily. Great for light shaping and sanding. EZ Lock for faster accessory changes.
Dremel EZ Lock Finishing Abrasive Buff Set Dremel 420 Cut-Off Wheel WHEEL EMERY IMPREGNATED 1IN
Compatible with both No.EZ402 EZ lock mandrel and standard No.402 mandrel and all Dremel rotary tools. Refinish furniture, clean grills, remove paint, tarnish and more. Includes 2 buffs, 1 coarse, 180 grit and 1 medium, 280 grit. For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. Emery impregnated disc is ideal for general polishing of most ferrous metals, stones, glass and ceramics. Also ideal to clean and define grooves. Use it to remove small burrs and scratch marks left by grinding and sanding.
BRUSH NYLON BRISTLE 3/4IN 2PK BRUSH NYLON BRISTLE 1/8IN 2PK Dremel 199 High Speed Cutter
Ideal for light deburring, general cleaning and polishing in hard to reach places such as slotted surfaces. Long wearing nylon bristles. Can also be used for cleaning hard plastic such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. Ideal for light deburring, cleaning and polishing in hard to reach places such as slotted surfaces. Nylon bristles make it great for polishing silverware, jewelry and other precious metals. Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
BRUSH CARBON STEEL 1/8IN 2PK  BRUSH STAINLESS STEEL 3/4IN   BRUSH STAINLESS STEEL 1/2IN
Versatile brush for removing rust and corrosion. For use on items made of brass, copper, gold or other soft ferrous metals such as tools, door knobs, automobile parts and electrical contacts. Can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces and getting into hard to reach places like slots. Ideal for cleaning, deburring and surface finishing. Use on items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Ideal for cleaning, deburring and surface finishing. Use on items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles.
BRUSH STAINLESS STEEL 1/8IN   BRUSH BRASS 3/4 INCH 2PK      BRUSH BRASS 1/2 INCH 2PK
Ideal for cleaning, deburring and surface finishing items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Great for polishing and cleaning. Ideal for cleaning and surface finishing. Use on items made from gold, bronze, copper or brass. Use a brass brush to create a soft, sating or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel). Ideal for cleaning and surface finishing items made from gold, bronze, copper or brass. Use a brass brush to create a soft, satin or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel).
BRUSH BRASS 1/8 INCH 2PK      WHEEL SIC IMPREGNATED 1/2IN   Dremel 118 High Speed Cutter
Ideal for cleaning and surface finishing items made from gold, bronze, copper or brass. Use a brass brush to create a soft, satin or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel). Designed for light stock removal and high luster polishing. Works on a variety of surfaces including steel, aluminum, brass, silver, hard plastics, gold and other metals. Impregnated with silicone abrasive and lubricant. Eliminates the need for polishing compound. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
Dremel 124 Rotary Tool Bit Dremel 144 Rotary Tool Bit Dremel 193 High Speed Cutter
Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
Dremel 9924 Replacement Engraving Point Dremel 409 Cut-Off Wheel Quik-Change 4485 Collet Nut Kit
Replaceable bit for the 290 Dremel (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving. For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. Kit consisting of a special collet nut and four collets for use with a variety of Dremel tools, attachments and handpieces. Allows you to quickly change collets to accept bits with shanks of 1/32" to 1/8". Kit contains (1) each 1/8" Collet, 3/32" Collet, 1/16" Collet, 1/32" Collet and Collet Nut.
Dremel 7134 Abrasive Wheel Point Dremel 7144 Wheel Point Bit Dremel 502 Flap Wheel
High-speed cutter tipped with diamond particles tapered to a fine point for detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel. High-speed cutter tipped with diamond particles tapered to a bullet point for fine detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel. A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic.
Dremel 115 Rotary Tool Bit WHEEL KIT DIAMOND 3PIECE 3/4IN Dremel 504 Flap Wheel
Dremel Rotary Tool Bit, 5/16 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 25000 - 30000 rpm Maximum, Cylinder Shape, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes Diamond wheel kit includes (2) 3/4" (19.05 mm) diamond wheels and (1) 1/8" Mandrel. For cutting metal, glass, ceramics and plastics. Max rpm: 30,000. A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic.
Dremel 426 Cut-Off Wheel Dremel 503 Flap Wheel Dremel EZ471SA Detail Coarse Abrasive Brush
Fiberglass reinforced, use for slicing and cutting metal, wood and plastic.  Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic. For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
Dremel EZ472SA Detail Medium Abrasive Brush Dremel EZ473SA Detail Fine Abrasive Brush Dremel 654 Router Bit
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Do not run in excess of 30,000 RPM.
Dremel 9901 High Speed Cutter Dremel 9903 Rotary Tool Bit Dremel 9904 Rotary Tool Bit
Shapes, smooths or grinds especially hard materials such as hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 RPM. Shapes, smooths or grinds especially hard materials such as hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 RPM. Dremel Rotary Tool Bit, 3/32 in Diameter, 1/8 in Shank Diameter, Tungsten Carbide Cutting Edge, Applicable Materials: Stainless Steel, Hard Steel, Cast Iron, Ceramics, Non-Ferrous Soft Metal and Plastic, 35000 rpm Maximum, For Shaping, Smoothening and Grinding
Dremel 650 Router Bit Dremel Saw-Max Type 1A Cut-Off Wheel Dremel 192 High Speed Cutter
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Do not run in excess of 30,000 RPM. Cuts a variety of ferrous and nonferrous materials. 3/4" cut depth. .05" wheel thickness. For use on SKU# 454.6933. High speed versatile, carving and engraving cutter. Made of high quality steel for use on wood, plastic and soft metals. Ideal for shaping, hollowing, grooving, slotting and inlaying. Appropriate for curved surfaces. Bit diameter: 3/16" (4.8mm).
Dremel 125 Rotary Tool Bit Dremel 628-01 Drill Bit Set Dremel EZ Lock EZ Lock Mandrel
Dremel Rotary Tool Bit, 1/4 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 25000 - 30000 rpm Maximum, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes Bits are made of high speed steel and used for drilling into soft materials. Includes: 1/32", 3/64" bits (use #483 collet), 1/16" bit (use #482 collet), 5/64", 3/32" bits (use #481 collet) and 7/64", 1/8" bits (use #480 collet). One piece mandrel design simplifies the process of changing accessories and makes it easy to cut through a range of materials from metal to plastic. For use with exclusive EZ Lock Accessories.
Dremel 4486 Keyless Chuck Dremel EZ476 Cut-Off Wheel Dremel 615 Round Router Bit
Allows you to quickly and easily change accessory bits on  rotary tools 9.6V without changing collets. Accepts all accessory bits with 1/32" to 1/8" shanks. For cutting plastics. Compatible with all Dremel rotary tools. Pull-twist-release accessory changes. For use with the EZ402 EZ lock mandrel (SKU #482.4447). For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel.
Dremel Saw-Max Type 1A Cut-Off Wheel Black & Decker RT1022 Rotary Tool Accessory Kit Dremel 562 Tile Cutting Bit
Cuts a variety of materials such as wood, laminate flooring, drywall, PVC and plastic. 3/4" cut depth. .075" wheel thickness. For use on SKU# 454.6933. Universal system works on all rotary tools, including RTX and Wizard. Grinds, shapes and smooths most materials. Engraves most materials. Cuts nails, screws, bolts, chain, wire, pipe and closet maid shelving. High-speed cutter shapes ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes or create decorative wall tile by cutting a design.
Dremel 569 Grout Removal Bit Dremel EZ409 Cut-Off Wheel Dremel 9931 High Speed Cutter
Solid carbide bit removes wall and floor grout 3/8" below the face surface. Compatible with 275, 285, 395, 381, 398, and 380. Cuts through metal. Pull-twist-release accessory change. Use with either EZ402 (SKU #482.4447). Fast cutting, structured tooth-tape, for greater material removal on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile.
Dremel EZ456 Cut-Off Wheel Dremel EZ Lock Grinding Wheel Bosch EZ407SA  Oscillating Tool Accessories
One piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal. Cut off wheels labeled for easy identification. Compatible with all Dremel rotary tools . Designed to flush-grind a surface. Domed shape and extra-thick reinforced aluminum oxide material allows the grinding wheel to be used on either its side or face for surface grinding, shaping, smoothing, deburring, rust removal sharpening, and flush-grinding. Applications include extended general-purpose grinding on metals, castings, welded joints, rivets and rust.  Use with either EZ402 (SKU #482.4447). The EZ drum mandrel makes sanding band changes easy; just pull, place and secure. The one-piece mandrel design simplifies the process of changing bands and makes it easy to sand flat surfaces and edges. Provides a quicker and easier alternative to using a traditional sanding mandrel. Allows for flat sanding and edge sanding. Compatible with all Dremel rotary tools. Compatible with all Dremel 1/2" sanding bands. Bit diameter 12.7 mm.
Bosch 687-01 Rotary Tool Bit Set POINT SET DIAMOND 20PC 1/8INCH Dremel SM540 Circular Saw Blade
Set contains: mandrel, (2) 1/2" felt polishing wheel, high-speed cutter, 1-1/4" fiberglass-reinforced cut-off wheel, aluminum oxide grinding stone, silicon carbide grinding stone, mandrel, nylon brush, (36) 409 15/16" emery cut-off wheel, 1/2" drum sander, 1/2" coarse sanding band, polishing compound, (2) 1/2" fine sanding band, (2) 1" felt polishing wheel and storage box. Applications: cutting, grinding, carving, engraving, shaping, sanding, cleaning and polishing.. 20 piece set with assorted shapes and sizes of nickel bonded diamond points. 1/8" (3.18mm) shank. Excellent for deburring, etching and smoothing of glass, plastic, ceramics and metals. Max rpm: 30,000. Cuts most tiles and masonry materials such as wall tile, floor tile, porcelain, slate, stone and cement backer board. 3/4" cut depth. .075 wheel thickness. For use on SKU# 454.6933.
Dremel EZ Lock Mandrel Starter Kit Dremel EZ544 Cut-Off Wheel Dremel A679-02 Sharpening Kit
For cutting metal.  One-piece mandrel design simplifies process of changing cutting wheels, eliminates the need for screw and screwdriver. Effortless locking and loading, no tiny mandrel to lose. Compatible with all Dremel rotary tools. Includes No.EZ402 Mandrel and (5) No.EZ456 cutting wheels. Color code red. Do not run in excess of 35,000 RPM. Use to cut 1/2" wood and laminate. Pull-twist-release accessory change. For use with the EZ402 EZ lock mandrel (SKU #482.4447). Guides help restore edge on garden tools, sharpens all lawn mower blades and sharpens dull, slow-cutting chain saw blades. Includes garden tool, lawn mower and chain saw sharpening attachment, gauge, spacers, wrench, (4) sharpening stones and instruction manual. Fits tool models 4000, 3000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 780, 770, and 7700.
Dremel 543 Cutting Wheel Dremel 545 Abrasive Wheel Dremel 565 Cutting Guide Kit
For use all dremel tools. Powerful shaping tool that quickly and efficiently removes material. Easily creates compound curves and works on a variety of materials including woods, fiberglass, laminates, plastic and leather.o.Cuts and finishes in one operation. Use the edge of the wheel for cutting and slotting. Use the "face" of the wheel for shaping. Cuts 33 percent deeper than former cutting/shaping wheels up to 1/2". DO NOT USE ON METAL Long lasting, does not break, will not lose it's shape. Coated with fine diamond particles, smooth fine cut. Hole design to minimize heat buildup. Applications: cutting, sawing, carving, sharpening and filing hard materials including marble, concrete, brick, porcelain, ceramics, hard epoxy, soft and hard wood. Includes: No. 402 mandrel. Provides controlled cuts in a variety of materials. Depth adjustment sets correct cutting depth up to 3/4". Easy screw-on mounting and large window provides excellent visibility. Specs: fits tool models 400, 398, 395, 300, 285, 275, 200, 100, 800 and 780. Includes: multipurpose cutting guide attachment, (2) drywall cutting bits, (1) multi purpose cutting bit and instructions.
Dremel A577 Rotary Detailers Grip Attachment Kit Dremel Saw-Max Dome Shaped Type 27A Flush Cut Wheel Dremel 662DR Core Glass Drilling Bit
Offers enhanced grip and comfort for detailed applications. Provides optimal tool control when precision is required. Repositions the weight of the tool into the palm of your hand for a balanced feel and less fatigue. Attaches onto a rotary tool in place of its nose piece for quick and easy installation. Includes detailer's grip attachment, engraving cutter, tracing stencil and instructions. For making flush cuts on a variety of materials such as wood, laminate flooring, drywall, PVC and plastic. Dome-shaped. 3/4" cut depth. .075" wheel thickness. For use on SKU# 454.6933. For use on glass, ceramic wall tile, glass block, glass bottles, and jewelry. For drilling in both flat and contoured surfaces. Diamond-impregnated cutting bit. Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed. Holes on the side of the bit allow the removal of material. Includes cutting oil and instructions.
Dremel 196 High Speed Cutter WHEEL EZ LOCK PREMIUM 1-1/2IN Dremel 9929 Engraving Point
A versatile, high quality cutter made of high grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. Appropriate for curved surfaces. 7/32" bit diameter (5.6 mm). Cutting wheel features a super abrasive grit called cubic boron nitride or CBN. CBN used on a cut-off wheel allows the wheel to remain sharp longer, stay cool and it won't shrink; wheels have constant diameter during use for a full range depth of cut. Lasts at least 20 times longer than our fiberglass reinforced cutting wheels based on internal testing. In addition, with the Dremel premium metal cutting wheel you'll spend less time changing wheels. Saves space storing replacement wheels and saves money buying replacement wheels. 35000 rpm. For use with the EZ402 EZ Lock Mandrel that makes accessory changes as easy as Pull - Twist - Release. 1-1/2" diameter; Kerf: 0.041". Blade Thickness: .40 Use this point for continuous duty or commercial work. Can also be used for decorative engraving. Use on steel, chrome, titanium, granite, and other hard substrates. Use with Dremel 290 (619.9319) engraver.
Dremel EZ456B Cut-Off Wheel Dremel EZ Lock Mini Polishing/Sanding Kit KIT EZ SANDING/GRINDING DREMEL
Use to cut through metal. Pull-twist-release accessory change. Compatible with all Dremel rotary tools. For use with the EZ402 EZ lock mandrel (SKU #482.4447). Includes (3) 180, 280, & 320 grit abrasive buffs, (2) 36 & 120 grit detail abrasive wheels, (1) cloth polishing wheel and polishing compound. Sharpen lawn tools, remove rust, sand a sticker, engrave glass, plus more. Contains 31 genuine Dremel accessories for most every sanding, smoothing, shaping or grinding need. Includes a reusable storage box with removable organizer tray. Kerf: 0.05"; Blade thickness: 0.05"; Grit: 60, 120, 180 and 220. Color code: Blue.
Dremel 663DR Core Glass Drilling Bit Dremel 290 Electric Engraver Kit Dremel 194 High Speed Cutter
For use on glass, ceramic wall tile, glass block, glass bottles, and jewelry. For drilling in both flat and contoured surfaces. Diamond-impregnated cutting bit. Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed. Holes on the side of the bit allow the removal of material. Includes cutting oil and instructions. Stroke adjustment dial regulates engraving depth from fine lines to deep grooves. Replaceable carbide points lets you engrave on most surfaces. Soft grip adds extra comfort and control. Letter/number template helps etch words and numbers. Light and compact design provides comfortable use for precision engraving performance. Amperage: 0.2; Hertz: 60; Speed: 7,200 (spm). Includes Engraver tool, Letter/number template and 9924 Carbide point. A versatile, high-quality cutter made of high grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. 1/8" bit diameter (3.2 mm).
Dremel 568 Grout Removal Kit Dremel EZ Lock Abrasive Wheel Dremel 575 Right Angle Attachment
Attachments unique shape keeps the bit at the perfect cutting angle and keeps the cutting bit centered between the tiles, 30 degree cutting angle provides controlled cutting along the grout line. Special guides keep the bit centered between tiles. Large window for cut line visibility. Depth adjustment controls cutting depth up to 3/8" below the tile surface. Removes both wall and floor grout. Includes: grout removal attachment, 1/16" carbide grout removal bit and instructions. Cuts through metal. Pull-twist-release accessory change. Use with either EZ402 (SKU #482.4447). Coupling system allows you to rotate the attachment on your tool making hard to reach areas instantly accessible with the Right Angle Attachment. Specs: ball bearings and spiral bevel gears, quick connect system no tools required, compact, long-lasting and versatile. Fits tool models 400, 398, 395, 300, 285, 275, 800 and 780. Includes: right angle attachment and instructions.
Dremel EZ Lock Mini Cutting Kit Dremel Multipro Flexible Shaft CUTTING SAW MULTI-PRPS KIT 7PC
Includes (4) 1-1/2" metal-cutting wheels, (3) 1-1/2" thin-cut wheels and (3) 1-1/2" plastic cutting-wheels. Use with either EZ402 (SKU #482.4447). The flexible, 36" shaft attaches easily, new 5" bend radius provides more flexibility during use. Specs: comfort grip hand piece, integrated shaft lock button, Quick connect, accepts up to 1/8" shank accessories, works with collet system and the dremel chuck. Fits tool models 400, 398, 395, 300, 285, 275 and 800. Includes: flex shaft attachment, square drive nut and instructions Use to cut drywall, wood, plastic, metal, cement, brick, and more. Includes (7) genuine Dremel Saw-Max cutting wheels: (1) SM500 wood and plastic carbide wheel, (1) SM540 tile diamond wheel, (2) SM520 masonry cut-off wheels and (3) SM510 metal cut-off wheels.
KIT ROTARY ASSY DREMEL 130PC  Dremel 709-01 Super Accessory Kit Dremel 670-01 Mini Saw Attachment
Inside this accessory set are assorted bits for cutting, carving, engraving, grinding, drilling, sharpening, sanding, cleaning and polishing. The kit consists of regular cut off wheels, sanding bands, sandpaper discs, felt polishing wheels, carbon steel brush, aluminum oxide grinding stones, silicon carbide grinding stones, dressing stone, mandrels, wrench and a re-usable storage case. Versatile and reusable accessory kit includes everything you need to cut, grind, sand, polish, drill, sharpen and clean. Includes:  1-1/4" cut off wheel, 3/4" carbon steel brush, polishing compound, (4)-four-1" felt polishing wheel, silicon carbide grinding stone, high speed cutter, 1/2"/60 grit sanding drum with mandrel, 1/4"/60 grit sanding band with mandrel, mandrel, wrench, aluminum oxide grinding stone, silicon carbide grinding stone, aluminum oxide grinding stone, (12)-twelve-15/16" emery cut off wheel, (12)-twelve-15/16" heavy duty emery .-cut off wheel, 1-1/4" fiberglass reinforced cut off wheel, (4)-four-small felt wheel, cone polishing tip, (6)-six-1/2"/60 grit sanding band, (12)-twelve- 3/4" 180 grit sanding disc, (12)-twelve- 3/4"/220 grit sanding disc, (12)-twelve- 3/4"/.240 grit sanding disc, (6)-six-1/4"/60 grit sanding band, (6)-six-1/2"/120 grit sanding band, (6)-six- 1/4"/ 120 grit sanding band, mandrel, dressing stone, bristle brush and 180 grit abrasive buff. Attaches to the rotary tool in seconds with Quick Connect System. Specs: makes clean, straight perpendicular cuts up to 1/4" thick, angled throat allows for straight, perpendicular cuts, clear housing for better visibility, directional guide and lower guard retracts when not in use. Includes: mini saw attachment, rip/crosscut blade, drive adapter and instruction manual.
KIT ACCESSORY ALL/PURP 160PC  Dremel 220-01 Drill Press MK Diamond 158252 Bench Top Corded Tile Saw
Dremel 220-01 Drill Press
Our Price: $48.87
Comes with re-usable storage case and 160 accessories. Lift out trays for easy organization of the included bits. This kit is ready for cutting, grinding, polishing, sanding, cleaning and more. The kit also includes sanding bands, sandpaper discs, polishing compound, felt polishing wheels, aluminum oxide grinding stone, silicone carbide grinding stone, mandrels, wire brush and wrench. A complete start-up kit offering a breadth of accessories helpful for a wide assortment of tasks. Drill press, tool holder and flex shaft holder all in one, drills accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 16 and 29 inches. Specs: base 56 square inches, drill depth 2 inches, fits tool models 275, 285, 300, 395, 398, 400, 780 & 800. Includes: work station attachment, mounting wrench and instructions. Light weight and compact saw with detachable table stop that prevents saw from moving away from operator when pushing material into blade, rips ceramic and stone tiles up to 12", immersion blade cooling system requires no pump, built in 45 degree miter table, easy alignment rip guide, 45 degree rip guide, safeswitch prevents saw from being operated when locking key is removed. Specs: 120V, 5,500 RPM, blade capacity  4-1/2", depth of cut (4-1/2" blade) 1", weight 12 lbs., 18"Lx16"Wx7"H, UL approved. Includes: internal cord storage, 4-1/2" wet diamond blade included, rip guide, 45 degree rip guide, table stop.
M-D 48190 Portable Corded Tile Saw Rockwell Bench Top Table Saw Leg Stand TABLE SAW 10INCH 15AMP W/STAND
For cutting a variety of ceramic, porcelain, and stone tile, diamond coated edge to cut through hard material, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, carrying handle, tilting table allows for miter cuts. Adjustable rip guide. Specs: : Motor: 3/4 HP, 3.5 AMPS. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 13" x 14-3/4". Weight: 20lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-3/8".  Use replacement blade 5542840 Aluminum main table with Quick release rip fence, 0-45 degree and blade bevel. Table size 26"  x 16". Max cutting depth at 90 degree = 3" ; Max cutting depth at 45 degree = 2-1/2". Accessories include: Spanner Wrench; Blade: 10" x5/8" x 24T; Rip Fence; 45 degree Miter Gauge; Push Stick. 15 amp motor. 4800 rpm. Extra large 24" x 20" die-cast aluminum table. Self-aligning rip fence automatically locks front and rear. Rips material up to 9-1/2" wide. Tool-free installation of blade guard and anti-kickback pawls. Oversized sliding miter gauge for miter cuts from 0-45 degrees. Bevel cut from 0-45 degrees. Rocker on/off switch. Optional sliding extension table expands rip capacity to 24". Includes: 40T Carbide-Tipped blade and heavy duty metal stand. Weighs 55 lbs.
Skil Portable Table Saw Folding Stand MK Diamond 157222 Table Corded Tile Saw M-D Building 48191 M-D Fusion Wet Tile Saws
Features heavy-duty folding stand for fast setup and easy transport, 3-1/2" cut height capacity cuts through 4x materials, self-aligning rip fence, miter gauge guides work pieces when making cross cuts, EZ view measurements system for accurate settings and on-tool storage for all accessories and guarding system. Die-cast aluminum table with 20in x 26in table surface extends to 20 in. x 32 in. for longer work pieces. Specs: 5/8" arbor size, neg 2-degrees to 47-degrees bevel angle range, 6' grounded cord length, 2-1/2" depth of cut at 45-degrees, 3-1/2" depth of cut at 90 degrees, 5,000 no load rpm and 120V. Includes heavy-duty folding stand, carbide-tooth blade, 2 blade wrenches, self aligning rip fence and miter gauge. Versatile and compact tabletop tile with high torque universal motor, high impact thermoplastic water reservoir, safeswitch prevents saw from being operated when locking key is removed. Specs: 120V, 5,500 RPM, blade capacity 7", arbor size 5/8", length of cut 12", depth of cut 2", LxWxH 17" x 14" x 12", weight 15 lbs. Includes: 7" wet cutting diamond blade, water pump, rip guide. For cutting a variety of ceramic, porcelain, and stone tile, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, large carrying handles, tilting table allows for miter cuts. Heavy-duty cast aluminum cutting table, drain plug makes for easy water change, adjustable rip guide mounts securely. Secs: Motor: 1 HP, 6.25 Amps. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 18" x 22". Weight: 33lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-1/16".  Use replacement blade 554.2840
SAW TABLE 10IN 15AMP W/STAND  MK Diamond 160028 Corded Tile Saw QEP 83200 Corded Bridge Saw
10" table saw with folding leg stand. Powerful 15 amp motor. 4,800 rpm for heavy duty performance. Large cast aluminum table extends from 20" deep - 21 wide to 37" wide. Rip capacity 26" on the right side of the blade; 8-3/4" on the left side. Cut capacity 3" at 90? and 2" at 45?. Quick release rip fence adjusts easily and provides sturdy accurate cuts. Unique folding legs allow the user to easily transport the saw on the job. Wheels built in to the saw allow for easy transport using the right leg as a handle. Includes push stick, miter gauge, blade guard, rip fence blade wrench and 24th carbide blade. Weighs 55 lbs. Wet cutting tile saw. High torque, universal motor. Runs on standard house current and draws only 5 amps at 120 volts. Engineered for cutting ceramic, travertine and slate. MK Safe-switch prevents saw from being operated when locking key is removed. Chrome guide-bar and linear bearing assembly ensures accurate tracking and alignment. Single piece zinc-plated steel frame for rigidity, strength and durability. Hinged blade guard for easy blade changes. Fully submersible, thermally protected water pump. High impact removable thermoplastic water reservoir will not rust or bend out shape. 7" blade capacity. Includes 7" diamond blade, water pump, wrenches and rip guide. Depth of cut 2"; length of cut 18"; diagonally cuts 13" tile. Dimensions of saw: 33"L x 18-1/2"W x 12-5/8"H. Use to cut marble, granite, porcelain, stone and tile. Dual internal water delivery system for maximum dispersion. Adjustable pivoting rail allows easy angle positioning from 90? to 45?. Angle/rip guide for consistent cuts. Automatic thermal overload protection prevents saw from overheating. Child-proof, locking on/off switch and key for safety. Power cords are encapsulated in a protective tube and attached to a flexible rod; keeps the cutting table safe and clear. Specs: motor: 1 HP, 120V-60Hz/9.5 Amps, 1100 watts, rpm: 3420 rpm, 8" blade capacity, 5/8" arbor, rip cuts 24" tile, diagonal cut on 18" tile, depth of cut: 1-3/8", dimensions: 37" L x 18" W x 47-1/2" H (w/legs), weight 82.32 lbs ( w/legs). Includes: transport handle and fold-out stand with wheels, 8" porcelain rated continuous rim wet diamond blade, high volume water pump and angle/rip cutting guide.
TABLE SAW 10IN WORM DRIVE     Dewalt DWE7480 Table Saw SAW TABLE BARE 60V MAX 8-1/4IN
TABLE SAW 10IN WORM DRIVE
Our Price: $375.94
This wood cutting portable Worm Drive Table Saw is specifically designed for ripping. With the power and torque to tackle difficult cuts, bogging down is a thing of the past. 3-1/2" depth of cut and 25" rip capacity are big enough to rip plywood sheets in half. It also features a Dual-Field motor and smooth start-up for a saw that runs cooler and lasts longer. Weighs 49 lbs. Compact 10" job site table say with Site-Pro modular guarding system. Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate. 24" of rip capacity, easily cuts a variety of larger shelving and trim materials. Site-Pro modular guarding system allows for tool free adjustments of the guarding components appropriate for each application. 15 amp 4800 rpm motor quickly rips through hardwoods with ease. On board storage provides easy access to the Site-Pro guarding components and push stick when not in use. Metal roll cage base offers greater durability than plastic bases. Blade can be adjusted 0-45 degrees for bevel applications. Weighing only 48 lbs., the table saw can easily be moved on and off the job. Rear feet adjust to level the saw on uneven work surfaces. Dust port allows for 2-1/2" vacuum hook up and minimizes clean up. 24T carbide blade enhances cut quality and prolongs blade life. Table coating reduces friction for smoother cutting. Includes: Miter gauge, push stick, 10" carbide blade and blade guard. (DW7450 Stand sold separately Orgill sku 573.9974) Maximized for accuracy, capacity and run-time. The brushless motor delivers the power to cut all common materials. 24" of rip capacity for ripping 4 x 8 plywood or OSB sheets. The rack and pinion fence allows for fast, easy adjustments. Power-loss reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position. Site-Pro Modular Guarding system allows for tool free adjustments of the guarding. Metal roll cage base offers greater durability than plastic bases. Table coating reduces friction for smoother cutting. Table coating reduces friction for smoother cutting. 5/8" arbor size. 1-3/4" depth of cut at 45 degrees. Weighs 45 lbs. Includes table saw, carbide blade, non-thru cut riving knife, push stick, miter gauge, blade guard, rip fence and (2) blade wrenches.
MK Diamond 159943 Corded Tile Saw Rockwell Portable Table Saw Trolley Stand SAW TABLE W/STAND ROLLING 10IN
The powerful 7.4 amp, high-torque motor has maintenance-free, self-lubricating pinion and gear-box assembly. Tilting head allows for precise 45 degree miter cuts and variable height cutting head allows for plunge cutting. Sliding aluminum die-cast cutting table rips 18" tile and diagonally cuts 13" tiles. Linear bearing and chrome plated guide-bar assembly ensure precise cutting. The frame is single piece zinc-plated steel for rigidity, strength and durability. Hinged blade guard allows for easy blade changes. Motor incorporates the heavy duty on/off MK-Safeswitch and a built-in water pump receptacle. Removable thermoplastic water reservoir, 7" diamond blade, submersible water pump and rip guide are all included. Weight 33 pounds. Dimensions: 33" long x 19" wide x 20" high. CSA approved. Laser indicator for consistent accuracy. Cuts 4x4 in one pass. Base of the saw incorporates a sturdy fold-down trolley stand with wheels, onboard accessory storage and can be rolled from one jobsite to another by using the outstretched leg as a pull handle. The stand also features an adjustable leg extension for set-up on uneven surfaces. Specs: no-load speed of 5000 rpm, overall table dimensions are 28-1/2"x19" with a 30" rip capacity to the right and 11" on the left, depth of cut is 3-9/16" at 90 degrees and 2-9/16" at 45 degrees, dado width is 1/2" and  weighs 74 lbs. Includes: a rip fence, miter gauge, push stick, riving knife and sawdust collection bag. Jobsite table saw with folding rolling stand. Engineered for rip-sawing and cross-cutting or ordinary wood, hardwood, plywood and composite wood materials. Soft start function reduces noise and recoil at start-up. Electric brake halts rotation of brake within seconds. Overload protection automatically shuts off motor. Bevel range of 0 degree to 45 degree for cuts ranging from 3-1/8" to 2-1/4". Easy adjustments for blade height or angle. 2-1/2" rear dust port can connect to a shop vac or duct collection system. On-tool accessory storage. 15 amp motor. No load speed 4,500 rpm. 28-3/4" x 22" table extension. Telescoping table extension supports 35" of ripping capacity to the right and 22" to the left.  Stable and durable fold and roll stand with large 8" rubber, all terrain treaded wheels. Includes 10" carbide tipped blade, blade guard assembly, anti-kickback pawl assembly, miter gauge assembly, push stick, rip fence assembly, outfeed support assembly, (2) blade wrenches, 5mm hex bar wrench, 4mm hex bar wrench, and 2.5mm hex bar wrench.
SAW TABLE 60V W/BATT/CHARGER  Dewalt DWE7490X Table Saw Dewalt DWE7491RS Table Saw
This table saw is maximized for accuracy, capacity and run-time. The brushless motor delivers the power to cut all materials. Rack and pinion telescoping fence rails make fence adjustments smooth and accurate and provides the capacity to rip 4 x 8 sheet goods. Runs off of 20V/60V Flexvolt battery system for maximum portability. Power-loss reset prevents accidental re-starts following a power disruption when the switch is left in the "on" position. On board storage for guard, fence, wrenches and miter gauge. 24" of rip capacity for ripping 4 x 8 plywood or OSB sheets. Site-Pro modular guarding system allows for tool free adjustment of the guarding. Metal roll cage base offer greater durability than plastic bases. Table coating reduces friction for smoother cutting. Depth of cut at 45 degrees 1-3/4". Max width to left of blade 12". Tool weight 48 lbs. Includes: (1) 60 volt Max Table Saw, (1) Non-Thru Cut Riving Knife, (1) 20 volt/60 volt Max Flexvolt battery, (1) push stick, (1) Fast charger, (1) blade guard, (2) blade wrenches, (1) rip fence and (1) miter gauge. Rack and pinion telescoping fence rail make fence adjustments fast, smooth and accurate. Material support can be sued for narrow rip cuts. 28-1/2" of rip capacity easily cuts a variety of larger shelving and trim material. On board storage provides easy access to the blade guard assembly, fence, riving knife, push stick, miter gage, wrenches and cord wrap when not in use. Compact folding stand. Blade guard assembly allows for tool free adjustments of the guard for different applications. Flip over fence, allows for narrow rip cuts. Telescoping fence rails retract to create a small portable package. Features a 15.0 amp high torque motor with the power to cut pressure-treated lumber and hardwoods. 2-1/2" dust collection port easily connects to a vacuum for efficient dust extraction. 3-1/8" depth of cut at 90 and 2-1/4" at 45. No load speed 4800 rpm. 21-7/8" x 26-3/8" table provides ideal material support. Includes: 10" 24-tooth carbide blade, folding table saw stand, miter gauge, push stick, folding stand, rip fence, 2x blade wrenches and blade guard assembly. Jobsite table saw with rolling stand. Rack and pinion telescoping fence system make fence adjustments fast, smooth and accurate. Material support can be used for narrow rip cuts. 32-1/2" rip capacity easily cuts a variety of larger shelving and trim materials. On board storage system provides easy access to the blade guard assembly, fence, riving knife, miter gage, wrenches, push stick and cord wrap when not in use. Rolling stand designed for easy set up and breakdown with ideal stability. Telescoping fence rails retract to create a small portable package. Flip over ripping fence allows for narrow rip cuts. 15 amp motor quickly rips through hardwoods with ease. 2-1/2" dust collection port easily connects to a vacuum for efficient dust extraction. 3-1/8" depth of cut at 90 and 2-1/4" at 45. No load speed 4800 rpm. 21-7/8" x 26-3/8" table provides superior material support. Includes: 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches and blade guard assembly.
Bosch Table Saw Stand Dewalt D24000 Professional Corded Tile Saw Diamond Products 65020 Corded Tile Saw
The Smart Guard System is the first ever quick and easy-to-use modular blade guard, anti-kickback pawls and riving knife system; provides superior control over the material and maximum visibility while cutting. Engineered for maximum trueness, the 'Squarelock' Rip Fence glides along the rail at a finger's touch or locks into place for solid and consistent cutting performance. Easy set up and take down of your table saw; heavy-duty construction and 8" pneumatic wheels allow the Gravity-Rise stand to handle the toughest jobsites. Integrated Sub-base increases tool life by handling jobsite abuse, while protecting the table saw's base. Built-in sub-base and tabletop carry handles add to the saw's portability from jobsite to jobsite. On tool storage for all saw attachments and tools. Soft Start and 'Constant Response' Circuitry for quiet and smoother start-up, reduced start-up torque and maintaining speed under load. Exclusive Arbor Lock for single wrench blade changes. INCLUDES: 10" Worksite Table Saw; 10" 40-Tooth Carbide Tip Saw Blade; Blade Wrench; Hex Key; Sliding Miter Gauge; 'Gravity-Rise'Table Saw Stand with Pneumatic Wheels; Smart Guard System. Integrated cantilevering rail/cart system allows for 24" ripping capacity, 18" tile on diagonal, stainless steel rail system is integrated into the saw frame, integrated 45/22.5 degree miter feature for quick angled cuts, plunge feature, adjustable dual water nozzles, rear and side water attachments help contain water run-off and blade spray, removable cutting cart for easy cleaning, 5 gallon water pan, edge guide with 2-position,45/90, degree guide, will cut hard materials such as porcelain and stone. Specs: 15.0Amps, blade diameter 10", max rip capacity 24" tile, diagonal cut capacity 18" tile, max depth of cut 3-1/8", pan material, ABS plastic, removable water containment tray, 34"Lx26"W(housing only), weight 69 lbs. Portable, light weight, with easy clean water tray and liquid cooled bearing housing, blade guard includes brush for additional blade cooling protection and overspray. Solid steel frame with convenient carrying handles. Specs: 15amp/115V, rip cut up to 20", diagonal cut to 14", up to 10" blade capacity  with 5/8" arbor, dimensions 39"Lx24"Wx24"H, weighs 43 lbs. Includes: 10" blade, water pump and 45 degree and 90 degree rip guide/miter block.
   
 
1