Home > POWER TOOLS & ACC > POWER TOOLS > BENCH & STATIONARY > SCROLL SAWS
Sort By:
1
Dremel 932 Grinding Stone Dremel 952 Grinding Stone Dremel 402 Mandrel
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Specially designed for working with conic surfaces. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. To be used with all cutting wheels, sanding discs and polishing wheels.
Irwin 4935632 Jobber Length Drill Dewalt DW2552 Rapid Load Impact Drill Bit Dremel 8193 Grinding Stone
High quality steel with black oxide finish for corrosion resistance when used in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank with quick change for ease of use in impact drivers and quick change drill/drivers. High speed steel with black oxide coating for longer life; split point tip prevents walking when drilling in wood, metal, plastic and features the Rapid Load Quick Change system; 1/4" hex shank. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM.
BIT TITANIUM 9/64IN           Irwin 4935633 Jobber Length Drill Irwin 4935634 Jobber Length Drill
BIT TITANIUM 9/64IN
Our Price: $3.32
Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits. High quality steel with black oxide finish for corrosion resistance when used in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank with quick change for ease of use in impact drivers and quick change drill/drivers. High quality steel with black oxide finish for corrosion resistance when used in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank with quick change for ease of use in impact drivers and quick change drill/drivers.
Dewalt DW2553 Rapid Load Impact Drill Bit Dremel 560 Cutting Bit DRILL BIT IMPACT DUTY 5/32IN
High speed steel with black oxide coating for longer life; split point tip prevents walking when drilling in wood, metal, plastic and features the Rapid Load Quick Change system; 1/4" hex shank. Makes fast clean cuts in drywall for electrical boxes, air vents and other wall features. Do not run in excess of 30,000 RPM. Titanium coating for 3 times longer life verses black oxide. Shockwave impact duty, engineered for drills and impacts. Red Helix design for rapid chip removal to limit heat build-up to stay sharper longer. 135? split point for precision start no walking for fast accurate holes.
Irwin 4935635 Jobber Length Drill BIT TITANIUM 11/64IN          Irwin 4935636 Jobber Length Drill
BIT TITANIUM 11/64IN
Our Price: $3.72
High quality steel with black oxide finish for corrosion resistance when used in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank with quick change for ease of use in impact drivers and quick change drill/drivers. Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits. High quality steel with black oxide finish for corrosion resistance when used in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank with quick change for ease of use in impact drivers and quick change drill/drivers.
Dremel 432 Drum Sander Band Dremel 408 Drum Sander Band DRILL BIT IMPACT DUTY 1/16IN
Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. Titanium coating for 3 times longer life verses black oxide. Shockwave impact duty, engineered for drills and impacts. Red Helix design for rapid chip removal to limit heat build-up to stay sharper longer. 135? split point for precision start no walking for fast accurate holes.
DRILL BIT IMPACT DUTY 3/16IN  Dewalt DW2554 Rapid Load Impact Drill Bit Irwin 4935637 Jobber Length Drill
Titanium coating for 3 times longer life verses black oxide. Shockwave impact duty, engineered for drills and impacts. Red Helix design for rapid chip removal to limit heat build-up to stay sharper longer. 135? split point for precision start no walking for fast accurate holes. High speed steel with black oxide coating for longer life; split point tip prevents walking when drilling in wood, metal, plastic and features the Rapid Load Quick Change system; 1/4" hex shank. High quality steel with black oxide finish for corrosion resistance when used in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank with quick change for ease of use in impact drivers and quick change drill/drivers.
Irwin 4935638 Jobber Length Drill Dewalt DW2555 Rapid Load Impact Drill Bit Irwin 4935639 Jobber Length Drill
High quality steel with black oxide finish for corrosion resistance when used in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank with quick change for ease of use in impact drivers and quick change drill/drivers. High speed steel with black oxide coating for longer life; split point tip prevents walking when drilling in wood, metal, plastic and features the Rapid Load Quick Change system; 1/4" hex shank. High quality steel with black oxide finish for corrosion resistance when used in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank with quick change for ease of use in impact drivers and quick change drill/drivers.
Dremel 430 Drum Sander Band Dremel 480 Collet Dremel 83322 Grinding Stone
Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237. Industrial abrasive made for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non ferrous metals or for working with conical and flat surfaces. Do not run in excess of 30,000 RPM.
Dremel 481 Collet Dremel 462 Polishing Point Dewalt DW2556 Rapid Load Impact Drill Bit
For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237. Rubber polishing points are impregnated with abrasive and used on on ferrous metals to remove rough areas, small burrs and scratch marks. Point is ideal for cleaning and defining grooves. High speed steel with black oxide coating for longer life; split point tip prevents walking when drilling in wood, metal, plastic and features the Rapid Load Quick Change system; 1/4" hex shank.
Bosch Accessories 113 Engraving Cutters Dremel EZ Lock Finishing Abrasive Buff Set Bosch 431  Oscillating Tool Accessories
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 RPM. Compatible with both No.EZ402 EZ lock mandrel and standard No.402 mandrel and all Dremel rotary tools. Refinish furniture, clean grills, remove paint, tarnish and more. Includes 2 buffs, 1 coarse, 180 grit and 1 medium, 280 grit. A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8" shank. For rough shaping and smoothing wood and fiberglass. Ideal for removing rust from metal surfaces. Also ideal for shaping rubber surfaces. 1/4" bit diameter (6.4 mm). Pack of 6.
Dremel 422 Felt Polishing Tip Dremel 429 Felt Polishing Wheel BIT TITANIUM 5/64IN
BIT TITANIUM 5/64IN
Our Price: $4.36
Polishing point is made to take a semi-rough finish and polish it to a smooth finish on most ferrous metals, stones, glass and ceramics. Used with 401 mandrel. Do not run in excess of 30,000 RPM. Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM. Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits.
BIT TITANIUM 13/64IN          Dremel 512E Finishing Abrasive Buff EZ-Lock 423E/423 Polishing Wheel
BIT TITANIUM 13/64IN
Our Price: $4.36
Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits. For cleaning, light sanding and removing tarnish from brass. Use on metal, glass, wood, aluminum and plastics. For use with the EZ402 EZ lock mandrel (SKU #482.4447) or standard 402 mandrel (SKU #619.9400). Includes 2 fine 320 grit buffs. Polish silverware to high luster, car detailing and restore door and window hardware. Compatible with all Dremel rotary tools, EZ402 EZ Lock mandrel and standard 402 mandrel (619.9400). Do not run in excess of 30,000 RPM.
DRILL BIT IMPACT DUTY 3/32IN  DRILL BIT IMPACT DUTY 7/32IN  Dremel 561 Spiral Cutting Bit
Titanium coating for 3 times longer life verses black oxide. Shockwave impact duty, engineered for drills and impacts. Red Helix design for rapid chip removal to limit heat build-up to stay sharper longer. 135? split point for precision start no walking for fast accurate holes. Titanium coating for 3 times longer life verses black oxide. Shockwave impact duty, engineered for drills and impacts. Red Helix design for rapid chip removal to limit heat build-up to stay sharper longer. 135? split point for precision start no walking for fast accurate holes. Cuts wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. Do not run in excess of 30,000 RPM.
Dremel 540 Cut-Off Wheel BRUSH CARBON STEEL 3/4IN 2PK  BRUSH CARBON STEEL 1/2IN 2PK
Easily cuts off slots bolts, screws, sheet metal, thin wood and plastic, trim castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No. 402 mandrel. Ideal for cleaning and removing rust and corrosion from items made of brass, copper, gold or other soft ferrous metals. Perfect for getting into hard to reach places like slots. You can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces. Ideal for cleaning and removing rust and corrosion. Use on items made of brass, copper, gold or other soft ferrous metals such as tools, door knobs, automobile parts and electrical contacts. Can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces and getting into hard to reach places like slots.
Dewalt Impact Ready DD5008 1-Piece Impact Drill Bit BIT TITANIUM 7/64IN           BIT TITANIUM 15/64IN
BIT TITANIUM 7/64IN
Our Price: $5.12
BIT TITANIUM 15/64IN
Our Price: $5.12
Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage. Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits. Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits.
Dremel 453 Precision Ground Sharpening Stone Dremel 454 Precision Ground Sharpening Stone Dremel 455 Precision Ground Sharpening Stone
Used for sharpening chain saw blades, quickly and easily. Used for sharpening chain saw blades, quickly and easily. Used for sharpening chain saw blades, quickly and easily.
Bosch 90930 Carbon Motor Brush Dewalt DW2557 Rapid Load Impact Drill Bit Dewalt Impact Ready DD5010 1-Piece Impact Drill Bit
For No. 275, No. 285, and No. 395 Type 3, 4 and 5 Moto-Tools. High speed steel with black oxide coating for longer life; split point tip prevents walking when drilling in wood, metal, plastic and features the Rapid Load Quick Change system; 1/4" hex shank. Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage.
MAG HSS DRILL BIT 9/64        Irwin 4935640 Jobber Length Drill Dewalt Impact Ready DD5009 1-Piece Impact Drill Bit
Impact ready shock absorber. High quality steel with black oxide finish for corrosion resistance when used in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank with quick change for ease of use in impact drivers and quick change drill/drivers. Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage.
Dremel 407 Drum Sander Band Dremel 953 Grinding Stone Dewalt Impact Ready DD5012 1-Piece Impact Drill Bit
Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage.
Dewalt Impact Ready DD5011 1-Piece Impact Drill Bit 1PC 5/32 ZINC HEX SHANK       DRILL BIT IMPACT DUTY 1/4IN
Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage. Impact ready shock absorber. Titanium coating for 3 times longer life verses black oxide. Shockwave impact duty, engineered for drills and impacts. Red Helix design for rapid chip removal to limit heat build-up to stay sharper longer. 135? split point for precision start no walking for fast accurate holes.
DRILL BIT IMPACT DUTY 1/8IN   Irwin 1871021 1-Piece Impact Drill Bit Irwin 1871022 1-Piece Impact Drill Bit
Titanium coating for 3 times longer life verses black oxide. Shockwave impact duty, engineered for drills and impacts. Red Helix design for rapid chip removal to limit heat build-up to stay sharper longer. 135? split point for precision start no walking for fast accurate holes. One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Irwin 1871023 1-Piece Impact Drill Bit Irwin 1871024 1-Piece Impact Drill Bit Irwin 1871025 1-Piece Impact Drill Bit
One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
DISC SANDING 240GRIT          Irwin 1871026 1-Piece Impact Drill Bit WHEEL EMERY IMPREGNATED 1IN
DISC SANDING 240GRIT
Our Price: $5.92
Great for light shaping and sanding. EZ Lock for faster accessory changes. One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Emery impregnated disc is ideal for general polishing of most ferrous metals, stones, glass and ceramics. Also ideal to clean and define grooves. Use it to remove small burrs and scratch marks left by grinding and sanding.
BRUSH NYLON BRISTLE 3/4IN 2PK BRUSH NYLON BRISTLE 1/8IN 2PK BRUSH CARBON STEEL 1/8IN 2PK
Ideal for light deburring, general cleaning and polishing in hard to reach places such as slotted surfaces. Long wearing nylon bristles. Can also be used for cleaning hard plastic such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. Ideal for light deburring, cleaning and polishing in hard to reach places such as slotted surfaces. Nylon bristles make it great for polishing silverware, jewelry and other precious metals. Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. Versatile brush for removing rust and corrosion. For use on items made of brass, copper, gold or other soft ferrous metals such as tools, door knobs, automobile parts and electrical contacts. Can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces and getting into hard to reach places like slots.
Irwin 1871027 1-Piece Impact Drill Bit Dewalt Impact Ready DD5013 1-Piece Impact Drill Bit Skil 80111 Gear Oil
One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage. For all Worm Drive circular saws.
Irwin 1892819 1-Piece Impact Drill Bit Dremel 199 High Speed Cutter Irwin 4935641 Jobber Length Drill
One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. High quality steel with black oxide finish for corrosion resistance when used in applications such as automotive, MRO, portable drills, stationary drill press; 1/4" hex shank with quick change for ease of use in impact drivers and quick change drill/drivers.
BRUSH STAINLESS STEEL 3/4IN   BRUSH STAINLESS STEEL 1/2IN   BRUSH STAINLESS STEEL 1/8IN
Ideal for cleaning, deburring and surface finishing. Use on items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Ideal for cleaning, deburring and surface finishing. Use on items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Ideal for cleaning, deburring and surface finishing items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Great for polishing and cleaning.
BRUSH BRASS 3/4 INCH 2PK      BRUSH BRASS 1/2 INCH 2PK      BRUSH BRASS 1/8 INCH 2PK
Ideal for cleaning and surface finishing. Use on items made from gold, bronze, copper or brass. Use a brass brush to create a soft, sating or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel). Ideal for cleaning and surface finishing items made from gold, bronze, copper or brass. Use a brass brush to create a soft, satin or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel). Ideal for cleaning and surface finishing items made from gold, bronze, copper or brass. Use a brass brush to create a soft, satin or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel).
WHEEL SIC IMPREGNATED 1/2IN   Dremel 192 High Speed Cutter Dremel 107 Engraving Cutter
Designed for light stock removal and high luster polishing. Works on a variety of surfaces including steel, aluminum, brass, silver, hard plastics, gold and other metals. Impregnated with silicone abrasive and lubricant. Eliminates the need for polishing compound. High speed versatile, carving and engraving cutter. Made of high quality steel for use on wood, plastic and soft metals. Ideal for shaping, hollowing, grooving, slotting and inlaying. Appropriate for curved surfaces. Bit diameter: 3/16" (4.8mm). Dremel Engraving Cutter, 3/32 in Diameter, 9-9/16 in Length, Ball Shape, 1/8 in Arbor/Shank, Carbon Steel, Silver, Applicable Materials: Wood, Fiberglass, Plastic and Soft Metals, 3/32 in Shank Diameter, Single Cut Tooth, For Engraving, Carving and Routing
Dremel 118 High Speed Cutter Dremel 124 Rotary Tool Bit Dremel 144 Rotary Tool Bit
Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
Dremel 193 High Speed Cutter Dremel 420 Cut-Off Wheel Irwin 1871028 1-Piece Impact Drill Bit
Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
BIT TITANIUM 17/64IN          Dewalt Impact Ready DD5015 1-Piece Impact Drill Bit Dewalt Impact Ready DD5016 1-Piece Impact Drill Bit
BIT TITANIUM 17/64IN
Our Price: $6.74
Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits. Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage. Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage.
Irwin 1892820 1-Piece Impact Drill Bit Quik-Change 4485 Collet Nut Kit Dewalt Impact Ready DD5014 1-Piece Impact Drill Bit
One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Kit consisting of a special collet nut and four collets for use with a variety of Dremel tools, attachments and handpieces. Allows you to quickly change collets to accept bits with shanks of 1/32" to 1/8". Kit contains (1) each 1/8" Collet, 3/32" Collet, 1/16" Collet, 1/32" Collet and Collet Nut. Constructed from one solid piece of heavy-duty Titanium metal that is up to 5 times more durable than 2-piece conventional bits. A web taper helps to increase bit strength, and a Pilot Point tip delivers speed and clear, burr-free holes. Ideal for metal, wood and plastic.
Dremel 504 Flap Wheel Dremel 503 Flap Wheel Irwin 1871029 1-Piece Impact Drill Bit
A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic. A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic. One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
BIT TITANIUM 9/32IN           Irwin 1892841 1-Piece Impact Drill Bit Dremel 409 Cut-Off Wheel
BIT TITANIUM 9/32IN
Our Price: $7.33
Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits. One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel.
Dremel 502 Flap Wheel WHEEL KIT DIAMOND 3PIECE 3/4IN 1PC 3/16 ZINC HEX SHANK STEEL
A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic. Diamond wheel kit includes (2) 3/4" (19.05 mm) diamond wheels and (1) 1/8" Mandrel. For cutting metal, glass, ceramics and plastics. Max rpm: 30,000. Impact ready shock absorber.
Dremel 7144 Wheel Point Bit 1/16 ZINC HEX MAG HSS DRILLBIT Irwin 1871030 1-Piece Impact Drill Bit
High-speed cutter tipped with diamond particles tapered to a bullet point for fine detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel. Impact ready shock absorber. One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
DRILL BIT IMPACT DUTY 5/16IN  Dremel EZ471SA Detail Coarse Abrasive Brush Dremel EZ472SA Detail Medium Abrasive Brush
Titanium coating for 3 times longer life verses black oxide. Shockwave impact duty, engineered for drills and impacts. Red Helix design for rapid chip removal to limit heat build-up to stay sharper longer. 135? split point for precision start no walking for fast accurate holes. For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
Dremel EZ473SA Detail Fine Abrasive Brush 1PC 7/32 ZINC HEX SHANK STEEL Dewalt Impact Ready DD5020 1-Piece Impact Drill Bit
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). Impact ready shock absorber. Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage.
Dremel 115 Rotary Tool Bit Dewalt Impact Ready DD5018 1-Piece Impact Drill Bit 1PC 15/64 ZINC HEX SHANK STEEL
Dremel Rotary Tool Bit, 5/16 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 25000 - 30000 rpm Maximum, Cylinder Shape, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage. Impact ready shock absorber.
BIT TITANIUM 19/64IN          Dremel 7134 Abrasive Wheel Point MAGNETIC  HSS DRILL BIT 3/32
BIT TITANIUM 19/64IN
Our Price: $9.04
Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits. High-speed cutter tipped with diamond particles tapered to a fine point for detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel. Impact ready shock absorber.
Dremel 650 Router Bit Irwin 1871041 1-Piece Impact Drill Bit Dremel 426 Cut-Off Wheel
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Do not run in excess of 30,000 RPM. One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Fiberglass reinforced, use for slicing and cutting metal, wood and plastic.  Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel.
Dremel 9901 High Speed Cutter Dremel 9903 Rotary Tool Bit MAGNETIC HSS DRILL BIT 7/64
Shapes, smooths or grinds especially hard materials such as hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 RPM. Shapes, smooths or grinds especially hard materials such as hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 RPM. Impact ready shock absorber.
Dremel 9904 Rotary Tool Bit Dremel Saw-Max Type 1A Cut-Off Wheel Dremel 654 Router Bit
Dremel Rotary Tool Bit, 3/32 in Diameter, 1/8 in Shank Diameter, Tungsten Carbide Cutting Edge, Applicable Materials: Stainless Steel, Hard Steel, Cast Iron, Ceramics, Non-Ferrous Soft Metal and Plastic, 35000 rpm Maximum, For Shaping, Smoothening and Grinding Cuts a variety of ferrous and nonferrous materials. 3/4" cut depth. .05" wheel thickness. For use on SKU# 454.6933. For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Do not run in excess of 30,000 RPM.
Irwin 1892843 1-Piece Impact Drill Bit MAGNETIC  M2 HSS DRILL BIT 1/8 Dremel 125 Rotary Tool Bit
One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Impact ready shock absorber. Dremel Rotary Tool Bit, 1/4 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 25000 - 30000 rpm Maximum, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes
BIT TITANIUM 21/64IN          1PC 1/4 ZINC HEXSHANK STEEL   Dremel 628-01 Drill Bit Set
BIT TITANIUM 21/64IN
Our Price: $10.40
Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits. Impact ready shock absorber. Bits are made of high speed steel and used for drilling into soft materials. Includes: 1/32", 3/64" bits (use #483 collet), 1/16" bit (use #482 collet), 5/64", 3/32" bits (use #481 collet) and 7/64", 1/8" bits (use #480 collet).
Dremel 4486 Keyless Chuck Dewalt Impact Ready DD5024 1-Piece Impact Drill Bit Dremel EZ476 Cut-Off Wheel
Allows you to quickly and easily change accessory bits on  rotary tools 9.6V without changing collets. Accepts all accessory bits with 1/32" to 1/8" shanks. Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage. For cutting plastics. Compatible with all Dremel rotary tools. Pull-twist-release accessory changes. For use with the EZ402 EZ lock mandrel (SKU #482.4447).
Dremel 615 Round Router Bit DRILL BIT IMPACT DUTY 3/8IN   Irwin 1892842 1-Piece Impact Drill Bit
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Titanium coating for 3 times longer life verses black oxide. Shockwave impact duty, engineered for drills and impacts. Red Helix design for rapid chip removal to limit heat build-up to stay sharper longer. 135? split point for precision start no walking for fast accurate holes. One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Dewalt Impact Ready DD5022 1-Piece Impact Drill Bit Dremel EZ Lock Grinding Wheel BIT TITANIUM 11/32IN
BIT TITANIUM 11/32IN
Our Price: $11.26
Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage. Designed to flush-grind a surface. Domed shape and extra-thick reinforced aluminum oxide material allows the grinding wheel to be used on either its side or face for surface grinding, shaping, smoothing, deburring, rust removal sharpening, and flush-grinding. Applications include extended general-purpose grinding on metals, castings, welded joints, rivets and rust.  Use with either EZ402 (SKU #482.4447). Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits.
Dremel EZ409 Cut-Off Wheel Dremel 569 Grout Removal Bit Dremel Saw-Max Type 1A Cut-Off Wheel
Cuts through metal. Pull-twist-release accessory change. Use with either EZ402 (SKU #482.4447). Solid carbide bit removes wall and floor grout 3/8" below the face surface. Compatible with 275, 285, 395, 381, 398, and 380. Cuts a variety of materials such as wood, laminate flooring, drywall, PVC and plastic. 3/4" cut depth. .075" wheel thickness. For use on SKU# 454.6933.
BIT TITANIUM 23/64IN          Irwin 1871042 1-Piece Impact Drill Bit Dremel 562 Tile Cutting Bit
BIT TITANIUM 23/64IN
Our Price: $11.81
Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits. One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. High-speed cutter shapes ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes or create decorative wall tile by cutting a design.
BIT TITANIUM 25/64IN          Dremel 9931 High Speed Cutter Dremel EZ456 Cut-Off Wheel
BIT TITANIUM 25/64IN
Our Price: $12.68
Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits. Fast cutting, structured tooth-tape, for greater material removal on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile. One piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal. Cut off wheels labeled for easy identification. Compatible with all Dremel rotary tools .
BIT TITANIUM 13/32IN          Skil 95105L On/Off Replacement Wormdrive Switch Kit Bosch EZ407SA  Oscillating Tool Accessories
BIT TITANIUM 13/32IN
Our Price: $13.44
Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits. Replacement switch for Skil wormdrive models SHD77 (SKU #464.0025), and SHD77M (SKU #888.9016). The EZ drum mandrel makes sanding band changes easy; just pull, place and secure. The one-piece mandrel design simplifies the process of changing bands and makes it easy to sand flat surfaces and edges. Provides a quicker and easier alternative to using a traditional sanding mandrel. Allows for flat sanding and edge sanding. Compatible with all Dremel rotary tools. Compatible with all Dremel 1/2" sanding bands. Bit diameter 12.7 mm.
Black & Decker RT1022 Rotary Tool Accessory Kit Dewalt Impact Ready DD5028 1-Piece Impact Drill Bit Dremel SM540 Circular Saw Blade
Universal system works on all rotary tools, including RTX and Wizard. Grinds, shapes and smooths most materials. Engraves most materials. Cuts nails, screws, bolts, chain, wire, pipe and closet maid shelving. Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage. Cuts most tiles and masonry materials such as wall tile, floor tile, porcelain, slate, stone and cement backer board. 3/4" cut depth. .075 wheel thickness. For use on SKU# 454.6933.
BIT TITANIUM 27/64IN          Bosch 687-01 Rotary Tool Bit Set POINT SET DIAMOND 20PC 1/8INCH
BIT TITANIUM 27/64IN
Our Price: $14.52
Impact duty titanium drill bits with Red Helix are engineered for impacts and drills. Designed with a variable Helix with an aggressive 35? Helix angle which ends at 15?. Limits heat build-up to stay sharper longer. The 135? split point tip delivers a precision start and prevents walking for fast, accurate holes. Can be used in all drilling applications to give you up to 3 times the life verses Black Oxide drill bits. Set contains: mandrel, (2) 1/2" felt polishing wheel, high-speed cutter, 1-1/4" fiberglass-reinforced cut-off wheel, aluminum oxide grinding stone, silicon carbide grinding stone, mandrel, nylon brush, (36) 409 15/16" emery cut-off wheel, 1/2" drum sander, 1/2" coarse sanding band, polishing compound, (2) 1/2" fine sanding band, (2) 1" felt polishing wheel and storage box. Applications: cutting, grinding, carving, engraving, shaping, sanding, cleaning and polishing.. 20 piece set with assorted shapes and sizes of nickel bonded diamond points. 1/8" (3.18mm) shank. Excellent for deburring, etching and smoothing of glass, plastic, ceramics and metals. Max rpm: 30,000.
Irwin 1871043 1-Piece Impact Drill Bit Dremel A679-02 Sharpening Kit Skil 95111L Replacement Wormdrive Assembly
One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Guides help restore edge on garden tools, sharpens all lawn mower blades and sharpens dull, slow-cutting chain saw blades. Includes garden tool, lawn mower and chain saw sharpening attachment, gauge, spacers, wrench, (4) sharpening stones and instruction manual. Fits tool models 4000, 3000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 780, 770, and 7700. For Skil wormdrive models SHD77 (SKU #464.0025), and SHD77M (SKU #888.9016).
Dremel Saw-Max Dome Shaped Type 27A Flush Cut Wheel Dremel EZ Lock Mandrel Starter Kit BIT TITANIUM 7/16IN
BIT TITANIUM 7/16IN
Our Price: $16.56
For making flush cuts on a variety of materials such as wood, laminate flooring, drywall, PVC and plastic. Dome-shaped. 3/4" cut depth. .075" wheel thickness. For use on SKU# 454.6933. For cutting metal.  One-piece mandrel design simplifies process of changing cutting wheels, eliminates the need for screw and screwdriver. Effortless locking and loading, no tiny mandrel to lose. Compatible with all Dremel rotary tools. Includes No.EZ402 Mandrel and (5) No.EZ456 cutting wheels. Color code red. Do not run in excess of 35,000 RPM. Impact Duty Titanium Drill bits with Red Helix are engineered for impacts and drills. Designed with a Variable Helix with an aggressive 35 degree Helix Angle which ends at 15 degrees. Provide rapid chip removal to limit heat buildup to stay sharper longer. The 135 degree split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you a long life of usage. Chip Breaker decreases heat buildup.
Dremel A577 Rotary Detailers Grip Attachment Kit Dremel 543 Cutting Wheel Dewalt Impact Ready DD5032 1-Piece Impact Drill Bit
Offers enhanced grip and comfort for detailed applications. Provides optimal tool control when precision is required. Repositions the weight of the tool into the palm of your hand for a balanced feel and less fatigue. Attaches onto a rotary tool in place of its nose piece for quick and easy installation. Includes detailer's grip attachment, engraving cutter, tracing stencil and instructions. For use all dremel tools. Powerful shaping tool that quickly and efficiently removes material. Easily creates compound curves and works on a variety of materials including woods, fiberglass, laminates, plastic and leather.o.Cuts and finishes in one operation. Use the edge of the wheel for cutting and slotting. Use the "face" of the wheel for shaping. Cuts 33 percent deeper than former cutting/shaping wheels up to 1/2". DO NOT USE ON METAL Designed to be used in a 1/4" hex shank impact drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic. Pilot point ensures a true start and eliminates bit walking. The solid one piece  is more durable and the web taper increases the rigidity for less chance of bit breakage.
Dremel EZ544 Cut-Off Wheel DRILL BIT IMPACT DUTY 1/2IN   BIT DRILL HEX TITANIUM 29/64IN
Use to cut 1/2" wood and laminate. Pull-twist-release accessory change. For use with the EZ402 EZ lock mandrel (SKU #482.4447). Titanium coating for 3 times longer life verses black oxide. Shockwave impact duty, engineered for drills and impacts. Red Helix design for rapid chip removal to limit heat build-up to stay sharper longer. 135? split point for precision start no walking for fast accurate holes. Impact Duty Titanium Drill bits with Red Helix are engineered for impacts and drills. Designed with a Variable Helix with an aggressive 35 degree Helix Angle which ends at 15 degrees. Provide rapid chip removal to limit heat buildup to stay sharper longer. The 135 degree split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you a long life of usage. Chip Breaker decreases heat buildup.
Dremel 662DR Core Glass Drilling Bit BIT IMPACT DUTY TITANM 15/32IN Dremel 565 Cutting Guide Kit
For use on glass, ceramic wall tile, glass block, glass bottles, and jewelry. For drilling in both flat and contoured surfaces. Diamond-impregnated cutting bit. Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed. Holes on the side of the bit allow the removal of material. Includes cutting oil and instructions. Impact Duty Titanium Drill bits with Red Helix are engineered for impacts and drills. Designed with a Variable Helix with an aggressive 35 degree Helix Angle which ends at 15 degrees. Provide rapid chip removal to limit heat buildup to stay sharper longer. The 135 degree split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you a long life of usage. Chip Breaker decreases heat buildup. Provides controlled cuts in a variety of materials. Depth adjustment sets correct cutting depth up to 3/4". Easy screw-on mounting and large window provides excellent visibility. Specs: fits tool models 400, 398, 395, 300, 285, 275, 200, 100, 800 and 780. Includes: multipurpose cutting guide attachment, (2) drywall cutting bits, (1) multi purpose cutting bit and instructions.
BIT DRILL HEX TITANIUM 31/64IN Dremel 545 Abrasive Wheel Irwin 1871044 1-Piece Impact Drill Bit
Impact Duty Titanium Drill bits with Red Helix are engineered for impacts and drills. Designed with a Variable Helix with an aggressive 35 degree Helix Angle which ends at 15 degrees. Provide rapid chip removal to limit heat buildup to stay sharper longer. The 135 degree split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you a long life of usage. Chip Breaker decreases heat buildup. Long lasting, does not break, will not lose it's shape. Coated with fine diamond particles, smooth fine cut. Hole design to minimize heat buildup. Applications: cutting, sawing, carving, sharpening and filing hard materials including marble, concrete, brick, porcelain, ceramics, hard epoxy, soft and hard wood. Includes: No. 402 mandrel. One-piece construction withstands higher torque loads than standard quick-change bits. Exclusive TurboMax tip minimizes walking and delivers faster starts and stays sharp longer. Made from premium high speed steel with black oxide finish for added corrosion resistance. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Dremel 196 High Speed Cutter ROTARY TOOL V-SPEED W/ACC     WHEEL EZ LOCK PREMIUM 1-1/2IN
A versatile, high quality cutter made of high grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. Appropriate for curved surfaces. 7/32" bit diameter (5.6 mm). 1001 household, hobby and project uses: cut, saw, sand, grind, drill, polish, buff, sharpen, clean and more. Variable speed: 8000 - 30,000 rpm. 1/8" Collet accepts all standard rotary tool accessories. Separate on/off and speed control switches. Spindle lock for quick bit changes. Rated voltage: 120V/60 Hz, 1.0 Amp, No load speed: 8000 - 30,000 RPM, Collet size: 1/8". Weighs only 1.2 lbs. 40 piece accessory set includes: (10) aluminum oxide grinding stones, (7) cut-off wheels, (8) sanding discs, (1) aluminum oxide grinding wheel, (1) 1/2" sanding drum, (3) sanding bands, (2) felt polishing wheels, (3) engraving cutters, (2) mandrels, (1) 1/8" (3mm) drill bit, (1) dressing stone, (1) wrench and (1) accessory storage case. Cutting wheel features a super abrasive grit called cubic boron nitride or CBN. CBN used on a cut-off wheel allows the wheel to remain sharp longer, stay cool and it won't shrink; wheels have constant diameter during use for a full range depth of cut. Lasts at least 20 times longer than our fiberglass reinforced cutting wheels based on internal testing. In addition, with the Dremel premium metal cutting wheel you'll spend less time changing wheels. Saves space storing replacement wheels and saves money buying replacement wheels. 35000 rpm. For use with the EZ402 EZ Lock Mandrel that makes accessory changes as easy as Pull - Twist - Release. 1-1/2" diameter; Kerf: 0.041". Blade Thickness: .40
Skil 95104L Replacement Wormdrive Cord Assembly Dremel 194 High Speed Cutter TRACKER TICK TOOL/ EQUIPMT 1PK
Replacement cord for 120 volt skil circular saws. Heavy-duty with a 3-prong plug. 15 amp, 120 volt capacity. 8' cord. A versatile, high-quality cutter made of high grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. 1/8" bit diameter (3.2 mm). The Milwaukee Tick tool and equipment tracker is a versatile Bluetooth tracker with multiple attachment options and a low profile design. Users can glue, screw, rivet or strap on the Tick on anything. Weather, water and dust proof ratings ensure that the Tick Tool and Equipment Tracker will survive any environment. Using the One-Key network, the Tick will provide location updates when it comes within a 100' range of any phone with the One-Key app, providing the last seen date, time and location. Powered by a 3 volt Lithium-Ion coin cell battery that provides over 1 year of run time. The app will provide low battery alerts when the coin cell needs to be replaced. Dimensions: 2.13"L x 1.88"W x 0.49"H. Weight: 0.05 lbs.
Dremel EZ Lock Mini Polishing/Sanding Kit KIT EZ SANDING/GRINDING DREMEL Dremel 663DR Core Glass Drilling Bit
Includes (3) 180, 280, & 320 grit abrasive buffs, (2) 36 & 120 grit detail abrasive wheels, (1) cloth polishing wheel and polishing compound. Sharpen lawn tools, remove rust, sand a sticker, engrave glass, plus more. Contains 31 genuine Dremel accessories for most every sanding, smoothing, shaping or grinding need. Includes a reusable storage box with removable organizer tray. Kerf: 0.05"; Blade thickness: 0.05"; Grit: 60, 120, 180 and 220. Color code: Blue. For use on glass, ceramic wall tile, glass block, glass bottles, and jewelry. For drilling in both flat and contoured surfaces. Diamond-impregnated cutting bit. Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed. Holes on the side of the bit allow the removal of material. Includes cutting oil and instructions.
Dremel EZ456B Cut-Off Wheel Dremel EZ Lock Mini Cutting Kit CUTTING SAW MULTI-PRPS KIT 7PC
Use to cut through metal. Pull-twist-release accessory change. Compatible with all Dremel rotary tools. For use with the EZ402 EZ lock mandrel (SKU #482.4447). Includes (4) 1-1/2" metal-cutting wheels, (3) 1-1/2" thin-cut wheels and (3) 1-1/2" plastic cutting-wheels. Use with either EZ402 (SKU #482.4447). Use to cut drywall, wood, plastic, metal, cement, brick, and more. Includes (7) genuine Dremel Saw-Max cutting wheels: (1) SM500 wood and plastic carbide wheel, (1) SM540 tile diamond wheel, (2) SM520 masonry cut-off wheels and (3) SM510 metal cut-off wheels.
Dremel 568 Grout Removal Kit Dremel 7000-N/5 2-Speed Rotary Tool Kit Dremel EZ Lock Abrasive Wheel
Attachments unique shape keeps the bit at the perfect cutting angle and keeps the cutting bit centered between the tiles, 30 degree cutting angle provides controlled cutting along the grout line. Special guides keep the bit centered between tiles. Large window for cut line visibility. Depth adjustment controls cutting depth up to 3/8" below the tile surface. Removes both wall and floor grout. Includes: grout removal attachment, 1/16" carbide grout removal bit and instructions. Ready to go on a minute's notice. This 2-speed cordless alkaline tool is ideal for a variety of do-it-yourself jobs inside or out. Includes 5 accessories and a wrench. Rotates at 2 speeds: 6,000 rpm or 12,000 rpm. Weighs only 6 ounces. Requires 4 AA batteries, Not Included. Cuts through metal. Pull-twist-release accessory change. Use with either EZ402 (SKU #482.4447).
Irwin 324011 Standard Tip Hammer Drill Bit Bosch 1550 Wood Burning Tool Irwin 324005 Standard Tip Hammer Drill Bit
Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers. Features a high-efficiency bronze core heating element that heats quickly with a maximum tip temperature of 1,050 degrees F for burning and soldering capabilities. Tool stand protects tool from marking work surface. Ergonomic, stay cool design for control and comfort and a short shaft length for control of tip. Specs: 110/120 V/AC, watts 30/W, weighs 2.5 ozs. Includes: multipurpose tool, tool stand, convenient tip storage tube, general purpose tip, script tip, cutting tip, hot knife tip, soldering tip. Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers.
Dremel 709-01 Super Accessory Kit Dremel Multipro Flexible Shaft KIT ROTARY ASSY DREMEL 130PC
Versatile and reusable accessory kit includes everything you need to cut, grind, sand, polish, drill, sharpen and clean. Includes:  1-1/4" cut off wheel, 3/4" carbon steel brush, polishing compound, (4)-four-1" felt polishing wheel, silicon carbide grinding stone, high speed cutter, 1/2"/60 grit sanding drum with mandrel, 1/4"/60 grit sanding band with mandrel, mandrel, wrench, aluminum oxide grinding stone, silicon carbide grinding stone, aluminum oxide grinding stone, (12)-twelve-15/16" emery cut off wheel, (12)-twelve-15/16" heavy duty emery .-cut off wheel, 1-1/4" fiberglass reinforced cut off wheel, (4)-four-small felt wheel, cone polishing tip, (6)-six-1/2"/60 grit sanding band, (12)-twelve- 3/4" 180 grit sanding disc, (12)-twelve- 3/4"/220 grit sanding disc, (12)-twelve- 3/4"/.240 grit sanding disc, (6)-six-1/4"/60 grit sanding band, (6)-six-1/2"/120 grit sanding band, (6)-six- 1/4"/ 120 grit sanding band, mandrel, dressing stone, bristle brush and 180 grit abrasive buff. The flexible, 36" shaft attaches easily, new 5" bend radius provides more flexibility during use. Specs: comfort grip hand piece, integrated shaft lock button, Quick connect, accepts up to 1/8" shank accessories, works with collet system and the dremel chuck. Fits tool models 400, 398, 395, 300, 285, 275 and 800. Includes: flex shaft attachment, square drive nut and instructions Inside this accessory set are assorted bits for cutting, carving, engraving, grinding, drilling, sharpening, sanding, cleaning and polishing. The kit consists of regular cut off wheels, sanding bands, sandpaper discs, felt polishing wheels, carbon steel brush, aluminum oxide grinding stones, silicon carbide grinding stones, dressing stone, mandrels, wrench and a re-usable storage case.
Quik-Lok 48-76-4008 Grade Hi-Flex Extension Cord Dremel 575 Right Angle Attachment Speedx HC4501 Rotary Hammer Drill Bit