Home > POWER TOOLS & ACC > POWER TOOLS > BENCH & STATIONARY
Choose a sub category:
ROTARY HOBBY TOOLS SCROLL SAWS ROTARY HOBBY TOOL ACCESSORIES
TABLE SAWS BAND SAWS ENGRAVERS
BENCH TILE SAWS WOOD-BURNING TOOLS POWER MITRE BOXES
CUT OFF SAWS/CHOP SAWS DRILL PRESSES BENCH SANDERS
BENCH GRINDERS SHARPENERS PLANERS
Sort By:
1
Dremel 9924 Replacement Engraving Point Drill Doctor WSSA0002012 Replacement Abrasive Belt Kit Drill Doctor WSSA0002703C Replacement Abrasive Belt Kit
Replaceable bit for the 290 Dremel (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving. For use with Work Sharp Knife & Tool Sharpener only, Orgill SKU# 775.2801. Includes two each: P80 coarse grit belts, P220 medium grit belt, and 6000 fine grit belts. 1/2" x 12". Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with: (6) P80 Coarse grit belts for tool grinding and sharpening.
Drill Doctor WSSA0002704C Replacement Abrasive Belt Kit Drill Doctor WSSA0002705C Replacement Abrasive Belt Kit Darex/Drill Doctor DA313020GF Drill Replacement Parts
Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with (6) P220 Medium grit belts. Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with (6) 6000 Fine grit belts. Replaces sharpening wheel of 3/32" to 1/2" drill bits for Drill Doctor. Fits all GenX model drill bit sharpeners. 3 layers of nickel/diamond plating to provide long life; lasts for 200 or more sharpenings.
ROTARY TOOL V-SPEED W/ACC     Dremel 9929 Engraving Point Dremel 290 Electric Engraver Kit
1001 household, hobby and project uses: cut, saw, sand, grind, drill, polish, buff, sharpen, clean and more. Variable speed: 8000 - 30,000 rpm. 1/8" Collet accepts all standard rotary tool accessories. Separate on/off and speed control switches. Spindle lock for quick bit changes. Rated voltage: 120V/60 Hz, 1.0 Amp, No load speed: 8000 - 30,000 RPM, Collet size: 1/8". Weighs only 1.2 lbs. 40 piece accessory set includes: (10) aluminum oxide grinding stones, (7) cut-off wheels, (8) sanding discs, (1) aluminum oxide grinding wheel, (1) 1/2" sanding drum, (3) sanding bands, (2) felt polishing wheels, (3) engraving cutters, (2) mandrels, (1) 1/8" (3mm) drill bit, (1) dressing stone, (1) wrench and (1) accessory storage case. Use this point for continuous duty or commercial work. Can also be used for decorative engraving. Use on steel, chrome, titanium, granite, and other hard substrates. Use with Dremel 290 (619.9319) engraver. Stroke adjustment dial regulates engraving depth from fine lines to deep grooves. Replaceable carbide points lets you engrave on most surfaces. Soft grip adds extra comfort and control. Letter/number template helps etch words and numbers. Light and compact design provides comfortable use for precision engraving performance. Amperage: 0.2; Hertz: 60; Speed: 7,200 (spm). Includes Engraver tool, Letter/number template and 9924 Carbide point.
Dremel 7000-N/5 2-Speed Rotary Tool Kit Dremel 7300-N/8 Cordless Rotary Tool Kit North American Tool 51832 Corded Rotary Tool Kit
Ready to go on a minute's notice. This 2-speed cordless alkaline tool is ideal for a variety of do-it-yourself jobs inside or out. Includes 5 accessories and a wrench. Rotates at 2 speeds: 6,000 rpm or 12,000 rpm. Weighs only 6 ounces. Requires 4 AA batteries, Not Included. Lightweight with two speeds and can be used with any Dremel accessory bit with up to a 1/8" shank. Specs: 6,500/13,000 RPM, weighs 9 oz. Includes: tool, (1) 3-hour battery charger, (1) 401 mandrel, (1) 432 1/2" 120 grit sanding band, (1) 414 small felt wheel, (1) silicon carbide grinding stone, (1) wrench. Specs: 10,000 - 32,000 rpm, 135 W, and 60 Hz. Includes 10 grinder stone, 2 diamond bits, 3 mandrel, 36 cutting disk, sanding drum, 3 sanding drum paper, 4 polishing wheel, 2 drill bits, collet, wet stone, 36 sanding paper and spanner.
Black & Decker RTX 3-Speed Rotary Tool Kit With Case Dremel 100-N/7 Corded Rotary Tool Kit Dremel MultiPro 7700-1/15 Cordless Rotary Tool Kit
Gets the job done faster and won't bog down under load. Flip-Lock spindle lock for quick and easy accessory changes. Universal collet accepts all standard rotary tool accessories. Soft grip for no-slip comfort and control. Three speeds: 12,000 rpm. 24,000 rpm and 30,000 rpm for the best results for each job. Lightweight, single speed tool with ball bearing construction allow for cool running, quiet, smooth operation. Specs Cord length 6', speed 35,000 rpm, voltage 120 AC/50-60 Hz. Includes  Mandrel, coarse 1/2", sanding drum, dressing stone, heavy duty emery cut off wheel, 1/2" 120 grit sanding band, aluminum oxide grinding stone, silicon carbide grinding stone. Compact, lightweight, medium duty cordless with lawn mower and garden tool sharpening attachment, shaft lock for easy bit changing, removable battery with 3 hour charge time. Specs: 7.2V, 2-speed (10,000 and 20,000 RPM). Accepts accessories up to 1/8" shank, weighs 12 oz. Includes: battery, 3 hour charger, accessories, storage bag  and garden sharpener. Refer to model No. 757-01 for replacement battery pack.
Drill Doctor DD350X Drill Bit Sharpener GRINDER BENCH 6IN W/LIGHT     Dremel 200-1/21 Corded Rotary Tool Kit
Sharpens HSS, Carbide, Cobalt tin coated and Masonry bits. Sharpens bits in less than 30 seconds. Easily replaceable diamond grinding wheel sharpens 118 degree point angle size 3/32" to 1/2". On chuck alignment for simplified sharpening process. 1/2 hp induction motor for quiet smooth performance. Two flexible gooseneck lights for better illumination. Adjustable tool rests. Eye shields for safety. No load speed: 3.550 rpm. Pre-drilled heavy-duty cast iron base. Wheel size: 6" x 4/5" x 1/2". Shaft diameter: 1/2". Includes (1) 36G wheel, (1) 60G wheel and light bulbs. Net weight: 25 lbs. Multipurpose cutting guide attachment, used for multiple applications on a variety of materials. Specs: 15,000 or 35,000 RPM, voltage 120/AC, 50-60/Hz, 6 ft. cord. Includes: 21 genuine Dremel accessories.
Rockwell RK7867 Bench Grinder Dremel 3000/300-1/24 Corded Rotary Tool Kit SPEAKER WIRELESS W/USB M10
Adjustable tool rests. No Load Speed 3450/min, magnifying eye shields and spindle lock. Wheel dimensions: 6"x3/4"x1/2" arbor hole grinding wheels, wheel grit left 36#/right 60#; machine weight 29 lbs. Accessories include: (2) Work rest and (2) Abrasive grinding wheels. Lightweight, comfort grip housing with variable speed, circle cutter/straight edge guide. Specs: voltage 120/AC, 50-60/Hz, 5,000 to 35,000 RPM, 6 ft. cord. Includes: storage case and 24 accessories. Bluetooth connect with portable electronic devices up to 30' away. Premium speaker with integrated Bass Port delivers loud, clear sound at all volumes. Jobsite durability with rugged over-mold and metal speaker grill to withstand drops, water and debris. 2.1Amp USB charger for phones, media players and tablets. 3.5mm Auxiliary in port for wired playback (Cable Not Included). Integrated loop for easy hanging and transport. M12 RedLithium Battery Not Included.
Work Sharp WSKTS Knife and Tool Sharpener Dremel 8000-03 Cordless Rotary Tool Kit Dremel 4000-2/30 Corded Rotary Tool Kit
Multi position grinding head with belt that conforms to cutting edge of any knife or tool, appropriate angle for specific knives. Flexible abrasive belts in multiple grits, creates a taper grind. Includes: Work Sharp Power Platform, belt sharpening module, kitchen knife guide, outdoor knife guide, abrasive belt kit: (P80 coarse, P220 medium, 6000 fine honing, quick start guide and instructional DVD. 8 volt Lithium-Ion cordless rotary tool is ideal for hands on projects around the home such as finishing, intricate sanding, polishing, cleaning, engraving and more. Variable speed control allows you to set the speed of the tool to match a particular accessory to the task at hand and is designed to be used with all Dremel accessories and most threaded attachments. Variable speed from 5,000 to 30,000 rpm to match the proper speed required. High capacity battery for longer run time. Comfort grip housing for easier handling and better tool control. Includes: 401 Mandrel, 402 Mandrel, 403 Bristle brush, 407 1/2" Drum sander, 414 Felt polishing wheel (2), 421 Polishing compound, 445 1/2" 240 Grit sanding band (2), 408 1/2" 60 Grit sanding band (3), 432 1/2" 120 Grit sanding band (3), 540 1-1/4" Cut-off wheel (3), 84922 Silicon carbide grinding stone, 932 Aluminum oxide grinding stone, 952 Aluminum oxide grinding stone and wrench. Variable speed for greater versatility. High performance motor for maximum performance at all speeds. Electronic feedback for consistent speed under load. Can be used with all Dremel accessories and attachments. Specs: Cord length 6', speed 5,000 to 35,000 rpm, voltage 120 AC/50-60 Hz, weight 18.8 oz. Includes: Dremel 4000 rotary tool, circle cutter/straight edge guide, sanding/grinding guide, storage case, quick start book.
SPEAKER BLUETOOTH 12V/20V MAX SPEAKER 18V/12V               RADIO JOBSITE 20V W/BLUETOOTH
SPEAKER 18V/12V
Our Price: $100.53
AC/DC powered and Auxiliary ports. Runs off Dewalt 12v/20v Max battery packs. Bluetooth 4.0 with up to 100 ft. range. Compact size for portability and storage. Rubber over mold and feet. Two high performance speakers provide loud sound and clear reception. Enhances sound quality with equalizer feature. Radio features AM/FM/AUX and 12 presets to save favorite stations. Bluetooth compatibility allows users to wirelessly stream music from any smart device. Durable and compact radio withstands jobsite elements and is easy to transport. Operates on any 20 volt max Lithium Ion battery. Also, an AC wall adaptor is included to provide an alternate source. Weighs only 3.2 lbs. Battery And Charger Sold Separately.
Dewalt DW756 Bench Grinder CHOPSAW 14INCH 15AMP 3800RPM  Drill Doctor DD500X Drill Bit Sharpener
The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 3,450 rpm no load speed, 6" wheel diameter, 1/2" spindle diameter, adjustable tool resets, length 15", weight 25.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench. 15 amp, 4 hp, 3,800 rpm motor with replaceable brushes provides power and durability. Quick-release material clamp allows for easy material cutting and removal. Cutting fence with miter adjustment allows up to 45 degree angles to be cut. Spark deflector provides safety and clear line of sight for cutting. Heavy duty steel base provides stability while cutting. Spindle lock for easy blade changes. 8' power cord. Weighs 32 lbs. 120 volts. 1" arbor size. Max Capacity (Round) 4-3/4" x 5-1/3". The model 500x is designed for durability and has the flexibility required to sharpen the largest range and most popular sizes of dull or broken bits including split points and masonry bits. With its popular "push to stop" design, the 500x splitting port won't allow your point to be over split. Ideal for a serious DIYer, hobbyist and the professional drill bit user who sharpens frequently and who works in wood and metal. The large bit and reverse twist (left hand) chucks increase this models already powerful capacities.
ROTARY TOOL VARIBLE SPEED     M12 2590-20 Jobsite Radio MK Diamond 158252 Bench Top Corded Tile Saw
ROTARY TOOL VARIBLE SPEED
Our Price: $114.60
Allows tool-less and collet-less accessory changes with the inclusion of the three jaw chuck. The chuck accepts all Dremel accessory shank sizes for fast and convenient accessory changes without ever using a wrench. Featuring the all new Pivot Light, your projects are will lit with an optimum line of sight since the light pivots to direct illumination where you want it. Variable speed and electronic feedback circuitry. The slim, ergonomic body design provides a comfortable 360 degree grip zone no matter how you hold it for extended ease of use. The completely redesigned air flow system lets the Dremel 4300 run cool, quiet and smooth so completing projects are more enjoyable than ever. 6' cord. Variable speed: 5,000 - 35,000 rpm. Features digital signal processor, weatherproof aluminum speakers, weather sealed MP3 compartment, shock absorbing ABS polymer housing, and ultraslim size. Powered by M12 Red Lithium battery packs (sold separately) or AC adaptor. Specs: 12 V, AM/FM/AUX modes, digital display, custom EQ, backlit LCD, clock, 10 presets and weighs 3.5 lbs. Includes Auxiliary input cord, AC adaptor and 2 AAA batteries. Light weight and compact saw with detachable table stop that prevents saw from moving away from operator when pushing material into blade, rips ceramic and stone tiles up to 12", immersion blade cooling system requires no pump, built in 45 degree miter table, easy alignment rip guide, 45 degree rip guide, safeswitch prevents saw from being operated when locking key is removed. Specs: 120V, 5,500 RPM, blade capacity  4-1/2", depth of cut (4-1/2" blade) 1", weight 12 lbs., 18"Lx16"Wx7"H, UL approved. Includes: internal cord storage, 4-1/2" wet diamond blade included, rip guide, 45 degree rip guide, table stop.
Rockwell RK7323 Table Saw Milwaukee 2460-21 M12 Cordless Rotary Tool Kits RADIO WORKSITE CMPCT 18/20/12V
Cuts wood, metal, plastic, aluminum and ceramic tile with ease. Sets up in seconds. Weighs only 13 lbs. 5.5 amp motor; 2,800 spm. 3/4" stroke length using a "T" shank jig saw blade. Includes blade holder, (5) T-shank assorted blades and allen key. Compact and lightweight. Tool runs from 5,000-32,000 RPM. Managed by a variable speed dial for fluid control. 1/8" Collet is compatible with all 1/32" - 1/8" shank accessories providing the user access to any cutting, grinding, sanding and polishing solutions. Includes rotary tool, M12 Redlithium battery, 5 cutting wheels and mandrel, wrench and 30-minute charger and carrying case. Can be powered by 18v NiCad/Li-ion, 12v max or 20v max DeWalt power tool batteries. AC/DC power allowing the flexibility to be powered by AC power cord or DeWalt power batteries. Devices storage box protects digital audio devices  from jobsite debris and damage. USB power port allows device to be charged via USB when radio is plugged into AC wall outlet. 3.5mm aux. input allows for connection to CD, MP3, portable satellite receivers and other digital audio devices (aux cable included). Heavy duty design with roll cage increases durability to withstand jobsite conditions. Radio Only (Charger Sold Separately).
SAW MITER COMPOUND 10IN       M-D 48190 Portable Corded Tile Saw Drill Doctor DD750X Drill Bit Sharpener
SAW MITER COMPOUND 10IN
Our Price: $130.24
Large table for better material support with vice clamping system to secure work space. Thumb actuated positive stops for quick miter adjustments. Dust collector attachment minimizes airborne particles. Specs: 5,000 rpm, 0-52 degree miter angle to the left and right for increased flexibility, 0-45 degree bevel angle to the left to provide clean and accurate bevel cuts. Includes: 24T TCT saw blade, dust bag, vise assembly, 5mm hex bar wrench, and holder. For cutting a variety of ceramic, porcelain, and stone tile, diamond coated edge to cut through hard material, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, carrying handle, tilting table allows for miter cuts. Adjustable rip guide. Specs: : Motor: 3/4 HP, 3.5 AMPS. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 13" x 14-3/4". Weight: 20lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-3/8".  Use replacement blade 5542840 Permanent magnet motor produces consistent power. Push to Stop feature will not allow you to over split the bit point, adjustable material take-off, replaceable diamond sharpening wheel. Custom Point angle sharpening, choose any angle from 115 degree to 140 degrees. One chuck sharpens all sizes, 3/32"-3/4", HSS, carbide, cobalt, TiN-coated and masonry bits. Includes:  professional hard shell carrying case.
Milwaukee 2790-20 Jobsite Radio Dewalt DW758 Bench Grinder MITERSAW COMPOUND 10IN W/LASER
Exclusive AM/FM tuner with digital processor, premium speakers and 40 Watt amplifier, weather sealed auxiliary compartment to run MP3/IPODS etc., shock absorbing ABS polymer and steel construction, customizable equalizer and 10-station preset, built-in bottle opener, durable cord wrap stores the 6 ft. AC cord. Powered by A/C power or M18 batteries (not included). Specs: 120V/AC, amplifier 40 Watts, 4" speakers high performance poly, digital display, customizable bass and treble equalizer, digital reception with signal processor tuner, auxiliary input 1/8" stereo jack, dimensions 19.5"x9.5"x11", weighs  17.5 lbs. The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 4.2 amps, 3/4HP, 3,600 rpm no load speed, 8" wheel diameter, 5/8" spindle diameter, adjustable tool resets, length 16", weight 39.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench. Make precision miter cuts up to 45 degrees left and right with 9 stops at commonly used angles. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-Tipped blade installed, hold-down clamp, dust bag, two extension wings, blade wrench and two AAA batteries for laser. No load speed: 4600 rpm. Weighs 24 lbs.
Dremel 4000-6/50 Corded Rotary Tool Kit SPEAKER WRLS M12/M18          Rockwell Corded Scroll Saw
SPEAKER WRLS M12/M18
Our Price: $150.36
Variable speed rotary tool with a slim, ergonomic body provides a 360-degree grip zone for comfort and control in any grip position. Tool can use all existing Dremel accessories and attachments plus high-performance attachments to complete the widest range of projects. Specs: Amperage 1.6 amps, Cord Length 6 ft., Speed 5,000 to 35,000 RPM, Voltage 120 AC, 50-60 Hz,Weight (lbs.) 18.8 oz. Includes: 50 assorted accessories Stream any audio wirelessly from any Bluetooth device. Connects up to 100 feet or use auxiliary connection. Loudest volume, lowest distortion. Two high definition mid-woofers maximize clarity at loudest volumes. Two high range tweeters drive high range of treble. Two passive radiators maximize clarity and volume of bass. 40 watt digital amplifier delivers stereo quality sound. Heavy duty construction. Water and dust protection. Impact resistant roll cage. Reinforced side caps and grill enhances impact resistance. Powered by Milwaukee M18/M12 batteries or AC outlet. USB power outlet quickly charges electronic devices in both AC and DC mode. Weighs 5.3 lbs. Dimensions: 7.5"L x 13.75"W x 6.5"H. Powerful 15 amp motor with 1.2 amp no load speed makes this a great machine for the workshop or the jobsite. Throat depth=16"; Stroke=4/5";  Cutting depth=2"; Table bevel =0-45 degrees left; Weight: 30.8 lbs; Dust blower; Dust port; Blade guard; Variable speed.  Accessories include ; Blade guard; Blade holder; Allen key; 2 blades:(1) 15 TPI;(1) 18TPI;
CHOP SAW ABRASIVE 14INCH      RADIO 18V/12V                 Rockwell Bench Top Table Saw Leg Stand
CHOP SAW ABRASIVE 14INCH
Our Price: $151.21
RADIO 18V/12V
Our Price: $151.22
This chop saw for metal is a powerful tool to have with the strength and grit to get the job done. Goes from truck to jobsite and back without adding strain to your day. Designed with a large 11" x 18-1/2" base for dependability and stays tough to make jobs easier. The versatile "D" handle gives you comfort and control cut after cut. Portable and lightweight at only 34 lbs. Aluminum main table with Quick release rip fence, 0-45 degree and blade bevel. Table size 26"  x 16". Max cutting depth at 90 degree = 3" ; Max cutting depth at 45 degree = 2-1/2". Accessories include: Spanner Wrench; Blade: 10" x5/8" x 24T; Rip Fence; 45 degree Miter Gauge; Push Stick.
Rockwell RK7866 Corded Sander Milwaukee 6177-20 Chop Saw SAW COMPOUND MITER 10 INCH
SAW CHOP 15 AMP 14 IN
Our Price: $169.78
Aluminum work table with dust port, adjustable belt tension, quick sanding belt changing. Specs: disc speed-3450/min, belt speed-1700/SFM, table tilt range-0-45degrees, table size-8-29/32" x 6-5/16", belt table tilt range-0-90 degrees. Includes: 45 degree miter gauge, Allen key, belt sander/disc sander. A quick set-up, quick release locking device holds material being cut securely during the cutting process. Material can be angle cut up to 45 degrees. Arm locks down for easy portability. Applications: fast cutting of drywall track in bundles, angle iron, conduit, pipe, channels, tubing, and rebar. Workpiece capacity: cutting pipe 5" O.D., bar stock 3-5/8", square stock 5". Specs:15 amp motor, 120 volts AC only. No load RPM 3900. 1" arbor. 9" maximum opening. Includes: vise, abrasive wheel and hex wrench.  Rental. 10" Compound miter saw with 14 amp motor, 5,200 rpm. Maximum cut capacity at 90? degree miter - 4"x4" and 2"x6" dressed lumber. Maximum cut capacity at 45? miter - 2"x4" and 1"x6" dressed lumber. Maximum cut capacity at 45? bevel - 2"x4". Miters 45 to 90 degrees; bevels 0-45 degrees. Lightweight die cast aluminum base allows for weight of 36.6 lbs. Accepts SS9100 (087.7894) leg stand and material supports. Includes dust bag, work clamp, 40th carbide tipped blade and blade wrench.
Hitachi CC14SFS Cut-Off Saws Rockwell RK7453 Corded Band Saw Hitachi C10FCH2 Sliding Compound Corded Miter Saw with Laser Marker
Powerful Hitachi motor, soft grip D-handle for easy operation and trigger switch with lock-off button and spark chute (diversion guard) for operators safety. Quick-locking vise for fast clamping. Spindle lock for easy wheel replacements. Double insulation. STANDARD EQUIPMENT: 1 cut-off wheel, 1 hex bar wrench. SPECIFICATIONS: 14" wheel diameter, 1" arbor. Capacity: 65mm (2-9/16") bar dia., 120mm (4-47/64") pipe dia., 130mm x 115mm (5-1/8" x 4-1/2") 235mm x 70mm (9-1/4" x 2-49/64") shape steel (W x H). 2,000W/AC 230V, 2,400/AC240V (15 AMP/AC120V power input (Full-Load Current for USA). 3,800/min no-load speed. 603 x 318 x 603mm. 36 lbs. tool weight. Aluminum working table with blade guide adjustment, work light and blade quick tension adjustment. Max cutting depth=3-1/8"; Throat depth=9"; Table Size=11-13/16" x 11-13/16"; Table Bevel=0-45 degree. Accessories include: Parallel Guide; Miter Gauge; Hex key. 59-1/2" blade included. Laser marker system for increased cutting accuracy. Horizontal handle, Large table, large extended fence raises to 4" for cutting crown molding vertically. Thumb actuated positive stops for quick miter adjustments. Carbon brush access, allows user to replace brush as needed  Dust collector attachment, to minimize airborne particles. Max work piece capacity is 2-5/16" H, max. by 5-21/32" W. Specs: Single-phase 120VAC 60Hz motor, 0-52 degree miter angle range to the right and left, 0-48 degree bevel angle range to the left with adjustable bevel stops. Includes: 10" tct saw blade, vice assembly with knob bolt, 10mm box wrench, 4mm hex bar wrench.
Dewalt D28710 Chop Saw MITERSAW SLIDING COMPOUND 10IN TABLE SAW 10INCH 15AMP W/STAND
Quick-lock vise for fast material clamping. Ergonomically designed "D" handle provides comfortable hand position. Top handle allows saw to be easily moved. 45-degree pivoting fence allows for fast and accurate angle cuts. Spindle lock allows users to make wheel changes fast and easy saving time and money. Chain lock-down allows the head of the saw to be locked in the carrying position. Steel base allows users to weld jigs or stops directly onto the base. STANDARD EQUIPMENT: 14" abrasive wheel and wrench. SPECIFICATIONS: 15 amps, 3.2 H.P. No-load speed 3,800 RPM. 1" Arbor. WORKPIECE CAPACITY: Cutting capacity 4" round and 4" x 7-3/4" rectangular. Sliding rail system for crosscutting stock up to 12" wide. Make precision miter cut up to 45 degrees left and right. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-tipped blade, hold-down clamp, dust bag, two extension wings, rear support foot bar, blade wrench and two AAA batteries for laser. 4800 rpm. Weighs 40 lbs. 15 amp motor. 4800 rpm. Extra large 24" x 20" die-cast aluminum table. Self-aligning rip fence automatically locks front and rear. Rips material up to 9-1/2" wide. Tool-free installation of blade guard and anti-kickback pawls. Oversized sliding miter gauge for miter cuts from 0-45 degrees. Bevel cut from 0-45 degrees. Rocker on/off switch. Optional sliding extension table expands rip capacity to 24". Includes: 40T Carbide-Tipped blade and heavy duty metal stand. Weighs 55 lbs.
Rockwell RK7033 Drill Press Dewalt DC012 Worksite Charger/Radio CHARGER RADIO BLUTOOTH 12V/20V
2/3 HP induction motor for dependable performance. 5-speed setting for best results in metal, wood or plastic. Rack and pinion table height adjustment. 2" spindle travel; 1/2" chuck. Table bevels 0 to 45 degrees left and right. Keyed safety switch prevents accidental starting. Includes 1 chuck key and 1 allen key. Weighs 55.5 lbs. Auxiliary port allows connection to CD Players, MP3 Players, and portable satellite receivers with an audio cable (cable not included) AM/FM digital tuner with LCD display, built-in clock, 15 station memory presets, high efficiency weather resistant speakers, dual bass ports, pivoting 11" flexible antenna, runs off of 7.2V to 18V Dewalt batteries making it a cordless radio, 3-stage charging system provides maximum run-time, power outlets, one hour charger for 7.2V to 18V Dewalt battery packs (except Univolt). Specs: charge time is one hour or less, weighs 14.25 lbs Designed to be the most versatile Jobsite radio charger. This charger radio is able to run off and charge all DeWalt slide pack battery packs including 12 volt, 20 volt and FlexVolt packs at 3 amps when plugged into an AC outlet. The unit is designed to include woofers, tweeters and air ports to provide clear and rich sound at all volume levels. An oversized device storage box protects devices from worksite conditions and includes an auxiliary and 2.1 amp USB charging port for convenient device charging. 2 AC power outlets on the side of the unit allow you to plug in additional tools or chargers without occupying additional outlets on the wall. Audio Visual Remote Control Protocol (AVRCP) allows you to control your device from the radio interface so you can keep the device in a safe place and skip to the next song or hit replay on the radio interface. Also contains a bottle opener for convenience.
RADIO/CHARGER JBSITE 18V AM/FM BOX DGTL PWR 3FUNC W/BLU-TH   DeWalt DCR015 Worksite Charger Radio
Includes: Radio/Charger, 16" auxiliary input cords. 2- AAA batteries. Digital bluetooth receiver streams audio wirelessly from over 100 ft. away., USB power port, premium speakers and 40- watt amplifier, customizable equalizer and 10-station preset, reinforced roll cage, metal handles, on-board bottle opener. 12"L, 15:H, 12"W., 17Lbs. The jobsite radio/charger/digital media stereo features Bluetooth technology to connect to the user's smart device (with a range of up to 150 ft) and stream internet radio and stored music. This portable, high performance, weather resistant entertainment system delivers 360? enriched stereo sound. Its four way speakers and a subwoofer provide outstanding sound quality in all directions. Durable, with an aluminum/rubber roll cage and a weather resistant design. The portable radio features a powered USB port. Can be powered by Bosch 18V Lithium-Ion batters or plugging into a 120 V outlet. Its built-in battery charger will charge the user's Lithium_ion batteries as well. Also features (4) 120 V power outlets for connecting tools or other devices. Includes (1) 6" male to male Aux cable and (2) AA batteries. 2 amp charger for 12V Max and 20V Max Dewalt battery packs allows for quick and convenient battery charging. Runs of 12V Max and 20V Max DeWalt batteries making it a cordless radio capable of running off rechargeable and reusable battery power. 2 AC power outlets offer more versatility for jobsite power. Auxiliary and USB ports allows for connection to cd, mp3, portable satellite receivers and other digital audio devices. USB port allows device to be charged via USB ports. Class D amplifier, woofers and tweeters provide full range of high and low sound for optimum sound quality.
Rockwell Shop RK7136.1 Sliding Compound Corded Miter Saw with Leg Stands RADIO/CHARGER TOUGH SYSTEM    Skil Portable Table Saw Folding Stand
RADIO/CHARGER TOUGH SYSTEM
Our Price: $224.60
Metal legs attach directly to the saw base. Lightweight, die cast aluminum base for easy transport. Includes adjustable rollers to construct infeed/outfeed support. Depth stops on the rollers allow for unlimited cuts of the same length. Preset detents for setting accurate, repeated miter cuts. Bevel adjusts from 0 to 45 degrees to accommodate most bevel cuts. Includes: dust bag and work clamp. Highly durable, portable and stackable solution designed to supply crisp, clear sound through either the radio functionality or wirelessly through any Bluetooth connectivity. 4 full range tweeters, 1 Subwoofer and 1 assisted bass resonator. IP54 rated for water and dust resistance. TouchSystem carrier cart compatible. Can run on a 12 volt max or 20 volt max Dewalt Li-Ion power tool battery or can be plugged into a wall outlet. Charging capability; built-in charger ensures jobsite productivity by charging 12 volt max and 20 volt max Dewalt power tools. Connectivity to Bluetooth, 3.5mm aux. Input, 5V/1A USB charger. Can be stacked to other ToughSystem modules. Features heavy-duty folding stand for fast setup and easy transport, 3-1/2" cut height capacity cuts through 4x materials, self-aligning rip fence, miter gauge guides work pieces when making cross cuts, EZ view measurements system for accurate settings and on-tool storage for all accessories and guarding system. Die-cast aluminum table with 20in x 26in table surface extends to 20 in. x 32 in. for longer work pieces. Specs: 5/8" arbor size, neg 2-degrees to 47-degrees bevel angle range, 6' grounded cord length, 2-1/2" depth of cut at 45-degrees, 3-1/2" depth of cut at 90 degrees, 5,000 no load rpm and 120V. Includes heavy-duty folding stand, carbide-tooth blade, 2 blade wrenches, self aligning rip fence and miter gauge.
MK Diamond 157222 Table Corded Tile Saw Dewalt DW713 Single Bevel Compound Corded Miter Saw Dewalt D28715 Chop Saw
Versatile and compact tabletop tile with high torque universal motor, high impact thermoplastic water reservoir, safeswitch prevents saw from being operated when locking key is removed. Specs: 120V, 5,500 RPM, blade capacity 7", arbor size 5/8", length of cut 12", depth of cut 2", LxWxH 17" x 14" x 12", weight 15 lbs. Includes: 7" wet cutting diamond blade, water pump, rip guide. Two-piece aluminum and Lexan guard design protects against side impact. Lexan allows user to see the blade without the glare, providing a clean line of sight. Base handle design delivers increased comfort and portability to the end user. Positive bevel stops, cam lock miter handle, adjustable stainless detent plate and precise miter system. SPECIFICATIONS: 13 amp motor, 5,000 RPM, negative 3-degree to 48-degree bevel capacity, left and right miter capacity, machined base fence support, tall sliding fence and easy access bevel lock. Powerful 15.0 amp motor provides more overload capacity, increasing performance and durability. Quick-Change Blade Change System increases productivity by providing user ability to change wheels without a wrench. Quick-Fence tool-free, 45-degree adjustable fence for fast, accurate angle cuts and Quick-Lock vise for fast clamping on different size materials. Soft start extends gear and motor life. Ergonomically designed ``D" handle for more comfortable hand position reducing user fatigue. Extra wide solid steel base and heavy-duty lock down pin. Heavy-duty compression spring for smooth movement and greater durability. Spindle lock allows user to make quick wheel changes. Large cutting capacity, 5" round, 4-1/2" x 6-1/2" rectangle. Adjustable spark guard allows user to channel sparks. Easily accessible brushes for convenient servicing on worksite. STANDARD EQUIPMENT: 14" abrasive wheel, blade change wrench, blade bolt, blade washer. SPECIFICATIONS: 15.0 AC Amps, 5.5 HP, 1" arbor, 14" wheel diameter, 5" max. capacity (round), 4-1/2" x 6-1/2" max. capacity (rectangular), 4,000 RPM, spindle lock, quick lock vise. 21" tool length. 39 lb. tool weight.
Makita LS1040 Double Bevel Compound Corded Miter Saw M-D Building 48191 M-D Fusion Wet Tile Saws Evolution RAGE3 Multipurpose Sliding Compound Corded Miter Saw
Machined aluminum base ensures accurate cuts. Performs compound cutting operations. Dual post compound pivoting arm. Bevel cuts up to 45 degrees to the left. Miter cuts 0-45 degrees left and 0-52 degrees right. Specs: Blade diameters 10", arbor 5/8", max. cutting capacity (bevel/miter) 90 degree/90 degree 2-3/4" x 5-1/8", 45 degree/45 degree 1-3/8" x 3-5/8", no load rpm 4,600, length 18-23/32", weight (lbs.) 24.2. Includes: socket wrench, carbide tipped blade, dust bag and triangular rule. For cutting a variety of ceramic, porcelain, and stone tile, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, large carrying handles, tilting table allows for miter cuts. Heavy-duty cast aluminum cutting table, drain plug makes for easy water change, adjustable rip guide mounts securely. Secs: Motor: 1 HP, 6.25 Amps. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 18" x 22". Weight: 33lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-1/16".  Use replacement blade 554.2840 Hi-torque gearbox reduces motor stresses, improving performance and durability. Cuts steel, aluminum, wood  and plastics easily, leaves no burr and offers an instantly workable finish, no coolant required and virtually no sparks are produced, 11-13/16" slide action. Compound tilt and slide mechanism offers a solution to almost all common applications, laser guidance, extra-large base, extendable fence guard for long workpieces. Specs: 230V or 110V/50Hz, 2000W (soft start), max depth cut (90 degrees): 3", (45 degrees miter): 1-1/2", (90 degrees miter): 11-13/16", (45 degrees miter): 8-1/4", no load speed-2500 min-1, dimensions are (HxWxL) 25"x20"x30", and weighs 41 lbs. Includes: vertical clamp, laser protector, plug, exhaust port, owner?s manual, dust bag, 5mm hex wrench, (2) extension supports, 6mm hex wrench, extension support stop, slide lock knob, table positioning handle w/thread collar, table locking knob, and blade.
SAW TABLE 10IN 15AMP W/STAND  Hitachi C12FDH Dual Compound Miter Saw Dewalt DW715 Single Bevel Compound Corded Miter Saw
10" table saw with folding leg stand. Powerful 15 amp motor. 4,800 rpm for heavy duty performance. Large cast aluminum table extends from 20" deep - 21 wide to 37" wide. Rip capacity 26" on the right side of the blade; 8-3/4" on the left side. Cut capacity 3" at 90? and 2" at 45?. Quick release rip fence adjusts easily and provides sturdy accurate cuts. Unique folding legs allow the user to easily transport the saw on the job. Wheels built in to the saw allow for easy transport using the right leg as a handle. Includes push stick, miter gauge, blade guard, rip fence blade wrench and 24th carbide blade. Weighs 55 lbs. Laser marker system accurately indicates where the blade will cut on the material and can be easily adjusted to the right or the left of the cut mark depending upon the user preference. Powerful 15 amp motor with 1,950 watts of output power smoothly powers through hardwoods with ease. Elastomer compound coats the horizontal handle, reducing vibration, while adding comfort and preventing slippage. Tall, pivoting aluminum fence that stands at a height of 5-1/8" allows crown molding to be cut vertically for convenience. Large base provides better support and balance to prevent material from warping. Externally accessible carbon brushes allow for quick and easy maintenance to prolong tool life. Miter scale ranges from 0-52 degrees, both to the right and left, for a broader range of cuts. Miter angles can be quickly adjusted using Hitachi's thumb actuated positive stops. Bevel scale ranges from 0-48 degrees to the right and left allowing the material to stay in place while the saw head flips to make opposing cuts. After major bevel angle is secured, micro-bevel adjustment knob can be used to dial-in to a precise angle without the weight of the saw head compromising the accuracy. Weighs 46.3 lbs. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree to the left and 0-3 degree to the right for increased capacity. 0-50 degree left and right miter capacity for greater versatility. Cam lock miter handle with miter detent override deliver quick, accurate miter angles. 4-hardened steel bevel stops at 0, 33.9, 45 and 48 degrees. Lightweight with built-in carry handle for easy portability. STANDARD EQUIPMENT: Carbide blade, extension kit, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 4,000 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 5-1/4" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat, 6-1/2" horizontal capacity crown molding lying flat, 2 x 8" for 45 degree bevel cut capacity (dimensional lumber), 2 x 8" for 90 degree cross-cut capacity (dimensional lumber), 2 x 8" max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6 dimensional lumber max width for 45 degree miter cut capacity, 42 lbs. tool weight. Stand Not Included.
Hitachi C8FSE Single Bevel Sliding Compound Corded Miter Saw SAW MITER SLIDE COMPOUND 10IN MK Diamond 160028 Corded Tile Saw
Electronic speed control, positive miter stops for quick adjustments, adjustable pivot fence, splinter guard, externally replaceable carbon brushes, dust collector attachment, precise compound cuts, easy-to-read measurements and quick settings, Linear ball bearing slide system, vertical handle with elastomer grip. Specs: 5,500 RPM, 8-1/2" blade diameter, 5/8" arbor size, bevel angle range: (Right) 0-5 degrees, (Left) 0-48 degrees, miter angle range: (Right) 0-57 degrees, (Left) 0-45 degrees, miter detent stops: (R & L) 15, 22.5, 31.6, 45, degrees, cross cut capacity (90 degress) 2-9/16"x12", size 21-27/32"Wx31-3/32"Lx19-3/32"H, weighs 31 lbs. Includes: 8-1/2" TCT saw blade, dust bag, vice assembly, box wrench, sub fence. 15 AMP motor tackles tough cutting jobs with ease. Zero rear clearance slide system. Ergonomic upfront bevel lock for quick and easy adjustments of bevel angles. Tool-less, adjustable laser marker for cutting accuracy. Positive stops with miter detent override for faster transitions between miter angles. Equipped with LED light for added visibility. 0-60 degree miter angle to the right and 0-55 degree miter angle to the left, 0-48 degree bevel angle range to the right and left. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 13 mm wrench, and vice assembly. SPECIFICATIONS: 15 AMP belt driven motor, pivoting fence, no-load speed of 3,200 RPM. Wet cutting tile saw. High torque, universal motor. Runs on standard house current and draws only 5 amps at 120 volts. Engineered for cutting ceramic, travertine and slate. MK Safe-switch prevents saw from being operated when locking key is removed. Chrome guide-bar and linear bearing assembly ensures accurate tracking and alignment. Single piece zinc-plated steel frame for rigidity, strength and durability. Hinged blade guard for easy blade changes. Fully submersible, thermally protected water pump. High impact removable thermoplastic water reservoir will not rust or bend out shape. 7" blade capacity. Includes 7" diamond blade, water pump, wrenches and rip guide. Depth of cut 2"; length of cut 18"; diagonally cuts 13" tile. Dimensions of saw: 33"L x 18-1/2"W x 12-5/8"H.
QEP 83200 Corded Bridge Saw Dewalt DW716 Double Bevel Compound Corded Miter Saw TABLE SAW 10IN WORM DRIVE
TABLE SAW 10IN WORM DRIVE
Our Price: $375.94
Use to cut marble, granite, porcelain, stone and tile. Dual internal water delivery system for maximum dispersion. Adjustable pivoting rail allows easy angle positioning from 90? to 45?. Angle/rip guide for consistent cuts. Automatic thermal overload protection prevents saw from overheating. Child-proof, locking on/off switch and key for safety. Power cords are encapsulated in a protective tube and attached to a flexible rod; keeps the cutting table safe and clear. Specs: motor: 1 HP, 120V-60Hz/9.5 Amps, 1100 watts, rpm: 3420 rpm, 8" blade capacity, 5/8" arbor, rip cuts 24" tile, diagonal cut on 18" tile, depth of cut: 1-3/8", dimensions: 37" L x 18" W x 47-1/2" H (w/legs), weight 82.32 lbs ( w/legs). Includes: transport handle and fold-out stand with wheels, 8" porcelain rated continuous rim wet diamond blade, high volume water pump and angle/rip cutting guide. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree with positive stops at 0, 33.9, 45 and 48 degree both left and right allowing user to flip the saw not the material. Back fence design delivers ability to cut 2 x 10" dimensional lumber at 90 degrees and 2 x 8" at 45 degrees. Precise miter system and machined base fence support, innovative gearbox and belt-drive design for increased cutting capacity. Lightweight, head lock-down pine and built-in carrying handle. Cam lock miter handle with detent override. Designed for use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path. STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 3,600 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat (10" with back fence), 6-1/2" horizontal capacity crown molding lying flat,  2 x 8" (2 x 10" with back fence) left and right for 45 degree bevel cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) for 90 degree cross-cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6" (2 x 8" with back fence)  dimensional lumber max width for 45 degree miter cut capacity. 44 lbs. tool weight. Stand Not Included. This wood cutting portable Worm Drive Table Saw is specifically designed for ripping. With the power and torque to tackle difficult cuts, bogging down is a thing of the past. 3-1/2" depth of cut and 25" rip capacity are big enough to rip plywood sheets in half. It also features a Dual-Field motor and smooth start-up for a saw that runs cooler and lasts longer. Weighs 49 lbs.
Dewalt DWE7480 Table Saw SAW TABLE BARE 60V MAX 8-1/4IN SAW MITER W/BATT W/CHARGER 20V
Compact 10" job site table say with Site-Pro modular guarding system. Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate. 24" of rip capacity, easily cuts a variety of larger shelving and trim materials. Site-Pro modular guarding system allows for tool free adjustments of the guarding components appropriate for each application. 15 amp 4800 rpm motor quickly rips through hardwoods with ease. On board storage provides easy access to the Site-Pro guarding components and push stick when not in use. Metal roll cage base offers greater durability than plastic bases. Blade can be adjusted 0-45 degrees for bevel applications. Weighing only 48 lbs., the table saw can easily be moved on and off the job. Rear feet adjust to level the saw on uneven work surfaces. Dust port allows for 2-1/2" vacuum hook up and minimizes clean up. 24T carbide blade enhances cut quality and prolongs blade life. Table coating reduces friction for smoother cutting. Includes: Miter gauge, push stick, 10" carbide blade and blade guard. (DW7450 Stand sold separately Orgill sku 573.9974) Maximized for accuracy, capacity and run-time. The brushless motor delivers the power to cut all common materials. 24" of rip capacity for ripping 4 x 8 plywood or OSB sheets. The rack and pinion fence allows for fast, easy adjustments. Power-loss reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position. Site-Pro Modular Guarding system allows for tool free adjustments of the guarding. Metal roll cage base offers greater durability than plastic bases. Table coating reduces friction for smoother cutting. Table coating reduces friction for smoother cutting. 5/8" arbor size. 1-3/4" depth of cut at 45 degrees. Weighs 45 lbs. Includes table saw, carbide blade, non-thru cut riving knife, push stick, miter gauge, blade guard, rip fence and (2) blade wrenches. Utilizes 20 volt Max Battery pack which provides on average, 183 cuts of 2x4 pine or 275 cuts of 3-1/4 pine baseboard. Integrated XPS cross system provides adjustment free cut line indication for better accuracy and visibility. Capacity to cut up to 3-5/8" nested crown and 3-1/2 base vertically. Will cut 2x8 lying flat. Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Oversized bevel scale makes bevel angle adjustments accurate and easy. Compact, lightweight design (31.6 lbs) allows for easy transport and storage. Cam lock miter handle delivers quick and accurate miter angles. Precise miter system and machined base fence support optimized durability and cutting accuracy. 7-1/4" blade diameter. No load speed: 3750 rpm. Includes battery, charger, carbide blade, user's guide, blade wrench and material clamp.
CHOP SAW DRY CUT 12IN W/DIABLO MK Diamond 159943 Corded Tile Saw Rockwell Portable Table Saw Trolley Stand
This Dry Cut Saw for metal cutting has a 4-1/2" cutting capacity in a compact frame. Handles big jobs and moves easily from the shop to jobsite. Powerful 15 amp motor and no load 1500 rpm cuts faster and cleaner than a chop saw; no debarring needed. Soft-start for a motor that runs smoother and longer for more cuts. Includes a 12" dry cut saw and a Diablo Cermet-tipped 60-tooth blade. Weighs 38.2 lbs. The powerful 7.4 amp, high-torque motor has maintenance-free, self-lubricating pinion and gear-box assembly. Tilting head allows for precise 45 degree miter cuts and variable height cutting head allows for plunge cutting. Sliding aluminum die-cast cutting table rips 18" tile and diagonally cuts 13" tiles. Linear bearing and chrome plated guide-bar assembly ensure precise cutting. The frame is single piece zinc-plated steel for rigidity, strength and durability. Hinged blade guard allows for easy blade changes. Motor incorporates the heavy duty on/off MK-Safeswitch and a built-in water pump receptacle. Removable thermoplastic water reservoir, 7" diamond blade, submersible water pump and rip guide are all included. Weight 33 pounds. Dimensions: 33" long x 19" wide x 20" high. CSA approved. Laser indicator for consistent accuracy. Cuts 4x4 in one pass. Base of the saw incorporates a sturdy fold-down trolley stand with wheels, onboard accessory storage and can be rolled from one jobsite to another by using the outstretched leg as a pull handle. The stand also features an adjustable leg extension for set-up on uneven surfaces. Specs: no-load speed of 5000 rpm, overall table dimensions are 28-1/2"x19" with a 30" rip capacity to the right and 11" on the left, depth of cut is 3-9/16" at 90 degrees and 2-9/16" at 45 degrees, dado width is 1/2" and  weighs 74 lbs. Includes: a rip fence, miter gauge, push stick, riving knife and sawdust collection bag.
Makita LS1018 Dual Slide Compound Miter Saw Dewalt DW734 Portable Reversible Corded Planer SAW MITER SLDNG COMPOUND 12IN
Large cutting capacity in a compact design and less weight at only 43.7 lbs. for job site portability. Powerful 13.0 amp direct drive motor requires less maintenance and delivers 4,300 rpm. Cuts up to 12" at 90 degrees and 8-1/2" at 45 degrees. Linear ball bearing system engineered to deliver "dead-on" accurate cuts. Rear handle bevel lock is easily accessible and adjusts 0-45 degrees (left and right) with positive stops at 0 degrees, 45 degrees (left and right).  Soft start feature for smooth start-ups. Ergonomic rubberized D-handle design for better fit and added comfort. Large precision machined aluminum base supports material for more efficient cutting. Electric brake for maximum productivity. See-thru blade guard system for greater visibility of blade and line of cut. Oversized trigger switch for better fit, added comfort and easier operation. Includes extension wings for supporting long work pieces. Ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general contractors and more. Includes: (1) 10" 40T Miter saw blade, (1) triangle rule for miter saws, (1) vice assembly, (1) dust bag assembly, (1) extension wing and (1) wrench 13mm. 4-column carriage lock for reduced snipe. Extra-long in-feed and out-feed tables provide 33-1/2" of material support. 3-knife cutter- head provides 96 cuts per inch. Material removal gauge and thickness scale for accurate cuts. Turret depth stop allows easy return to most frequently used depths. STANDARD EQUIPMENT: Dust hood. SPECIFICATIONS:  15 amp, 120-Volt AC motor, 10,000 RPM, 1/8" max depth of cut, 6" depth capacity. Feeds 26' per minute. 80 lb. weight.
SAW TABLE W/STAND ROLLING 10IN Makita LC1230 Cutting Saw SAW TABLE 60V W/BATT/CHARGER
Jobsite table saw with folding rolling stand. Engineered for rip-sawing and cross-cutting or ordinary wood, hardwood, plywood and composite wood materials. Soft start function reduces noise and recoil at start-up. Electric brake halts rotation of brake within seconds. Overload protection automatically shuts off motor. Bevel range of 0 degree to 45 degree for cuts ranging from 3-1/8" to 2-1/4". Easy adjustments for blade height or angle. 2-1/2" rear dust port can connect to a shop vac or duct collection system. On-tool accessory storage. 15 amp motor. No load speed 4,500 rpm. 28-3/4" x 22" table extension. Telescoping table extension supports 35" of ripping capacity to the right and 22" to the left.  Stable and durable fold and roll stand with large 8" rubber, all terrain treaded wheels. Includes 10" carbide tipped blade, blade guard assembly, anti-kickback pawl assembly, miter gauge assembly, push stick, rip fence assembly, outfeed support assembly, (2) blade wrenches, 5mm hex bar wrench, 4mm hex bar wrench, and 2.5mm hex bar wrench. Saw features a large cast aluminum base for stability, externally accessible brushes, "tool-less" guide plate, D-shape handle for easy gripping, shavings collection tray, quick release vise and shaft lock for easy blade changes. Applications; cutting light pipe, angle iron, tubing and conduit. Specs: 1" arbor, max. cutting capacities at 90 degrees 4-1/2", at 45 degrees 3-1/2", 1,300 no load rpm, overall length is 20-1/4", weight 41.9 lbs. Includes: carbide tipped blade, socket wrench and switch button. This table saw is maximized for accuracy, capacity and run-time. The brushless motor delivers the power to cut all materials. Rack and pinion telescoping fence rails make fence adjustments smooth and accurate and provides the capacity to rip 4 x 8 sheet goods. Runs off of 20V/60V Flexvolt battery system for maximum portability. Power-loss reset prevents accidental re-starts following a power disruption when the switch is left in the "on" position. On board storage for guard, fence, wrenches and miter gauge. 24" of rip capacity for ripping 4 x 8 plywood or OSB sheets. Site-Pro modular guarding system allows for tool free adjustment of the guarding. Metal roll cage base offer greater durability than plastic bases. Table coating reduces friction for smoother cutting. Depth of cut at 45 degrees 1-3/4". Max width to left of blade 12". Tool weight 48 lbs. Includes: (1) 60 volt Max Table Saw, (1) Non-Thru Cut Riving Knife, (1) 20 volt/60 volt Max Flexvolt battery, (1) push stick, (1) Fast charger, (1) blade guard, (2) blade wrenches, (1) rip fence and (1) miter gauge.
Hitachi C10FSBP4 Double Bevel Sliding Compound Corded Miter Saw Dewalt DWE7490X Table Saw SAW MITRE DUAL BEVEL 12IN 120V
Positive angle stoppers for easy adjustment of teeth, turn table position for miter cutting (at the right and left of the 0-degree center setting, at 15,22.5, 31.6 and 45-degree settings). High sub fence. Legibly labeled angle scale and bevel scale. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for smooth, accurate cutting, fine surface finish and low noise operation. Poly V-belt and motor driving system for longer service life. STANDARD EQUIPMENT: 1 each: Vise Assembly, dust bag, 10mm box wrench, 255mm (10") TCT saw blade. SPECIFICATIONS: 10" diameter, 120V, 12 Amp, 1,400W max. output, 3,800 RPM, soft start and speed control. Max cutting capacities: 0-degree (right angle), miter cut 45-degree (left/right), miter right 57-degree, bevel cut 45-degree (left), bevel cut 45-degree (right), miter left/right 45-degree plus bevel left 45-degree, miter right 45-degree plus bevel right 45-degree. Miter cutting range: 0-45 degree left, 0-57 degree right. Bevel cutting range: 0-45 right and left. 20-3/4W x 41-1/2"L x 24-1/4"H. 43 lbs. tool weight. Rack and pinion telescoping fence rail make fence adjustments fast, smooth and accurate. Material support can be sued for narrow rip cuts. 28-1/2" of rip capacity easily cuts a variety of larger shelving and trim material. On board storage provides easy access to the blade guard assembly, fence, riving knife, push stick, miter gage, wrenches and cord wrap when not in use. Compact folding stand. Blade guard assembly allows for tool free adjustments of the guard for different applications. Flip over fence, allows for narrow rip cuts. Telescoping fence rails retract to create a small portable package. Features a 15.0 amp high torque motor with the power to cut pressure-treated lumber and hardwoods. 2-1/2" dust collection port easily connects to a vacuum for efficient dust extraction. 3-1/8" depth of cut at 90 and 2-1/4" at 45. No load speed 4800 rpm. 21-7/8" x 26-3/8" table provides ideal material support. Includes: 10" 24-tooth carbide blade, folding table saw stand, miter gauge, push stick, folding stand, rip fence, 2x blade wrenches and blade guard assembly. The DHS716 12" (305mm) 120 volt Max Compound Miter Saw with top handle delivers power and cutting capacity with the portability and convenience of a cordless tool. Flexible power for corded or cordless use. CutLine Blade positioning system delivers adjustment free cutline indicator. Includes the 12" Compound Miter Saw, blade, blade changing wrench, dust bag and a  120 volt AC adapter (Batteries And Dual Port Fast Charger Sold Separately). 45 degree bevel cut capacity; 45 degree miter cut capacity; 90 degree cross-cut capacity. Arbor size: 5/8" (1") IN. Weighs only 44 lbs.
Dewalt DW717 Double Bevel Sliding Compound Corded Miter Saw Hitachi C10FSHPS Double Bevel Sliding Compound Corded Miter Saw SAW MITER SLDG CMPD W/LSR 10IN
Cross cut positive stop for optimal cutting position. XPS Laser Compatible. Tall sliding fence for optimized material support. Bevel detent system with 7 hard stops gives you accurate, repeatable cuts. Adjustable stainless steel miter plate. Cam lock miter system. Sliding fence that supports up to 6" base molding to the left of the blade & up to 3 1/2" to the right of the blade. Machined base fence insures blade perpendicularity to fence. SPECIFICATIONS: Blade Diameter: 10"; Bevel Capacity: 0 degrees - 48 degrees; Miter Capacity: 60 Degrees left, 51 degrees right; Crosscut Capacity at 0 degrees: 2" x 14"; Crosscut Capacity at 45 degrees: 2" x 12"; Vertical Capacity: 6" base molding, 6-1/4" crown molding; Amps: 15 amps; Net Weight: 51 lbs. Stand Not Included. 12 AMP belt driven motor with soft start and overload protection. Adjustable laser guide for precise cutting. Soft Start feature reduces noise and recoil during start-up. Electronic speed control keeps RPMs constant as load varies. Linear ball bearing slide system for precision and durability. Left and right positive stops on miter gauge located at 0, 15, 22.5, 31.6, and 45 degrees. Dust collection system collects 100% more dust than previous models. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 10 mm box wrench, and vice assembly. SPECIFICATIONS: 12 AMP belt driven motor, pivoting fence, no-load speed of 3,800 RPM. Large cutting capacity in a compact design with less weight at only 57.9 lbs. Powerful 15.0 amp direct drive motor requires less maintenance and delivers 3,200 rpm. Large-sized aluminum base improves stability of material for efficient cutting. Unique 2-steel rail sliding system offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (5-1/4?), crown molding (6-5/8? nested), and crosscut a 4" x12" at 90 degrees. The saw miters 0 to 60 degrees left and right, with positive stops at 0, 15, 22.5, 31.6, 45 and 60 degrees (left or right). The bevel lock allows for easy access and quick adjustments from 0 to 48 degrees (left and right). Includes: (1) 10" x 5/8?60T Micro-polished Miter saw blade, (1) triangle rule, (1) vertical vice, (1) dust bag, (1) Hex wrench.
TABLE SAW 1-KEY KIT 8-1/4IN   Dewalt Corded Scroll Saw Dewalt DWE7491RS Table Saw
Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16" x 23-3/4". Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Included. Jobsite table saw with rolling stand. Rack and pinion telescoping fence system make fence adjustments fast, smooth and accurate. Material support can be used for narrow rip cuts. 32-1/2" rip capacity easily cuts a variety of larger shelving and trim materials. On board storage system provides easy access to the blade guard assembly, fence, riving knife, miter gage, wrenches, push stick and cord wrap when not in use. Rolling stand designed for easy set up and breakdown with ideal stability. Telescoping fence rails retract to create a small portable package. Flip over ripping fence allows for narrow rip cuts. 15 amp motor quickly rips through hardwoods with ease. 2-1/2" dust collection port easily connects to a vacuum for efficient dust extraction. 3-1/8" depth of cut at 90 and 2-1/4" at 45. No load speed 4800 rpm. 21-7/8" x 26-3/8" table provides superior material support. Includes: 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches and blade guard assembly.
MITER SAW KIT 10IN M18 9.0BATT Dewalt DW735 2-Speed Portable Corded Planer Bosch Table Saw Stand
Milwaukee Powerstate brushless motor provides more corded cutting performance, power, more  run-time and longer life. Dual Bevel with 9 detents and easy access bevel lever. Top and side carrying handles for maximum portability. Detent override for easily setting miter locations outside of detents. The RedLink Plus Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection and productivity. Easy access to change blade. Durable RedLithium battery pack delivers more run-time, power and longer battery life with up to 400 cuts per charge. Maximum miter capacity 50/60. Includes: M18 Fuel Dual Bevel Sliding Compound Miter saw, (1) M18 RedLithium High Demand 9.0 battery pack, (1) M18 and M12 Rapid charger, (1) Blade Wrench, (1) Carbide Tipped Blade, (1) Clamp and (1) Dust bag. Automatic carriage lock for reduction of movement that causes snipe without need for manual engagement by user. 2-speed gear box allows user to change feed speed to optimize cuts per inch at 96 or 79 CPI. Fan assisted chip ejection vacuums chips off the cutter-head and exhausts them out of the machine. Material removal gauge and extra-large thickness scale for accurate cuts. Extra-large turret depth stop. STANDARD EQUIPMENT: Dust hose adapter, dust ejection chute. SPECIFICATIONS:  15- amp, 120-Volt AC motor, 10,000 RPM, 1/8" Max depth of cut 1/8", 6" depth/13" width capacity 6". Width capacity 13". Feeds 14' or 26' feet per minute. The Smart Guard System is the first ever quick and easy-to-use modular blade guard, anti-kickback pawls and riving knife system; provides superior control over the material and maximum visibility while cutting. Engineered for maximum trueness, the 'Squarelock' Rip Fence glides along the rail at a finger's touch or locks into place for solid and consistent cutting performance. Easy set up and take down of your table saw; heavy-duty construction and 8" pneumatic wheels allow the Gravity-Rise stand to handle the toughest jobsites. Integrated Sub-base increases tool life by handling jobsite abuse, while protecting the table saw's base. Built-in sub-base and tabletop carry handles add to the saw's portability from jobsite to jobsite. On tool storage for all saw attachments and tools. Soft Start and 'Constant Response' Circuitry for quiet and smoother start-up, reduced start-up torque and maintaining speed under load. Exclusive Arbor Lock for single wrench blade changes. INCLUDES: 10" Worksite Table Saw; 10" 40-Tooth Carbide Tip Saw Blade; Blade Wrench; Hex Key; Sliding Miter Gauge; 'Gravity-Rise'Table Saw Stand with Pneumatic Wheels; Smart Guard System.
Dewalt DWS780 Double Bevel Sliding Compound Corded Miter Saw Bosch GCM12SD Double Bevel Glide Corded Miter Saw SAW MITER SLIDING 12IN 120V
Adjustable stainless steel miter detent plate with 10-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. Single lever action double bevel design allows saw to easily bevel left and right 0-48 degree with positive stops at 0, 22.5, 33.9 and 45 degree in both directions permitting user to flip the saw and not the material. Back fence design delivers ability to cut 2 x 16" dimensional lumber at 90 degrees and 2 x 12" at 45 degrees. Precise miter system and machined base fence support deliver increased cutting accuracy. Innovative gearbox and belt-drive design for increased vertical cutting capacity. Miters 60 degrees to the left and 50 degrees to the right. Dual horizontal steel rails with clamping mechanism and linear ball bearings. Camlock miter handle with detent override. Compact and lightweight design for quick, easy transport and storage. For use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path.  STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15 amps, 3,800 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 16" horizontal capacity baseboard lying flat, 11-1/4" horizontal capacity crown molding lying flat,  2 x 14" (2 x 16" with back fence) 45-degree bevel cut capacity (dimensional lumber),  2 x 14" (2 x 16" with back fence) for 90-degree cross-cut capacity (dimensional lumber),  16" for 90-degree cross-cut capacity (max width), 2 x 12" max width for 45-degree miter-cut capacity (max height), 2 x 12" for 45-degree miter-cut capacity (max width). 53 lbs. tool weight. Stand Not Included. Up front bevel lock lever and range selector knob, easy access controls for quick and accurate bevel settings, large 25-1/2" base with built in cast sliding extensions for 40" total length, 4-1/2" speed-track sliding fences for easy bevel set ups and increased crown molding cutting capacities. Specs: no load RPM 3,800, bevel angle range is 48 degree left/48 degree right, 12" blade diameter, miter angle range is 52 degree left/60 degree right, weighs 65 lbs.  Includes (1 each): 12" 60T blade, material clamp, dust bag. 120 volt Max Double Bevel Sliding Compound Miter Saw with CutLine delivers capacity, accuracy, power, ease of use and the durability of a corded tool with the portability and convenience of a cordless tool. CutLine blade positioning system delivers accurate line of sight to be cut. Includes the 120 volt AC adaptor. (60 Volt Max Lithium Ion Batteries And Fast Charger Sold Separately).
Milwaukee 6955-20 Double Bevel Sliding Compound Corded Miter Saw SAW MITER COMPOUND 12IN BRSHLS Dewalt D24000 Professional Corded Tile Saw
The Miter Angle Digital Readout provides repeatable accuracy to 0.1 degree. Miter Angle Fine Adjust with Detent Override makes it simple to dial in precise miter angles. Dual Integral Jobsite Lights fully illuminate the work piece and cut line from either side of the blade. The powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start maintains constant cutting speed under load and decreases start up head movement. The Integral Dust channel captures up to 75 percent of the dust and debris cut. SPECIFICATIONS: Amps:  15.0; No Load Speed:  3,200 RPM; Blade Diameter:  12"; Arbor Size:  5/8" or 1"; Miter Range:  55 degrees  Left to 60 degrees  Right; Bevel Range:  48 degrees  Left to 48 degrees  Right; Miter Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 55 degrees; Right-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 60 degrees; Bevel Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees  Right-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees. Tool Weight  65 lbs. INCLUDES: Carbide Tipped Blade; Dust Bag; Blade Wrench. The 12" (305mm) 120V max compound miter saw delivers the power and cutting capacity that end users have come to expect from Dewalt corded miter saws with the portability and convenience of a cordless. Run time up to 289 cross cuts in baseboard along with the best in class vertical capacity against sliding fence. Tool height 26"; Tool length 32"; Tool weight 44 lbs. No load speed 3,800 rpm. Kit includes: (1) 12" (305mm) Compound miter saw, (1) Dual port fast charger, (1) blade, (1) 120V AC adapter, (2) 60V Max Lithium Ion batteries, (1) blade change wrench and (1) dust bag. Integrated cantilevering rail/cart system allows for 24" ripping capacity, 18" tile on diagonal, stainless steel rail system is integrated into the saw frame, integrated 45/22.5 degree miter feature for quick angled cuts, plunge feature, adjustable dual water nozzles, rear and side water attachments help contain water run-off and blade spray, removable cutting cart for easy cleaning, 5 gallon water pan, edge guide with 2-position,45/90, degree guide, will cut hard materials such as porcelain and stone. Specs: 15.0Amps, blade diameter 10", max rip capacity 24" tile, diagonal cut capacity 18" tile, max depth of cut 3-1/8", pan material, ABS plastic, removable water containment tray, 34"Lx26"W(housing only), weight 69 lbs.
SAW SLIDNG MITER 12IN BRSHLS  Diamond Products 65020 Corded Tile Saw
This double bevel sliding compound miter saw offers flexible power options; corded for unlimited run time or cordless for portability powered by Dewalt brushless motor technology. Accuracy is delivered through adjustable miter scale with 11 positive stops and visibility bevel scale the CutLine blade positioning system. Up to 289 cross cuts in 3-1/4" base molding. Compact design weighs only 56 lbs. Includes: (1) DHS 790 Miter saw, (1) Dual port fast charger, (2) 60 volt Max Lithium Ion batteries, (1) blade wrench, (1) 12" blade, (1) DCA 120 volt Max corded power supply and (1) dust bag. Portable, light weight, with easy clean water tray and liquid cooled bearing housing, blade guard includes brush for additional blade cooling protection and overspray. Solid steel frame with convenient carrying handles. Specs: 15amp/115V, rip cut up to 20", diagonal cut to 14", up to 10" blade capacity  with 5/8" arbor, dimensions 39"Lx24"Wx24"H, weighs 43 lbs. Includes: 10" blade, water pump and 45 degree and 90 degree rip guide/miter block.
   
 
1