Home > POWER TOOLS & ACC > POWER TOOLS > HOBBY TOOLS/ENGRAVERS > WOOD-BURNING TOOLS
Choose a sub category:
ROTARY HOBBY TOOLS ROTARY HOBBY TOOL ACCESSORIES ENGRAVERS
WOOD-BURNING TOOLS
Sort By:
1
Dremel 560 Cutting Bit Dremel 402 Mandrel Dremel 429 Felt Polishing Wheel
Makes fast clean cuts in drywall for electrical boxes, air vents and other wall features. Do not run in excess of 30,000 RPM. To be used with all cutting wheels, sanding discs and polishing wheels. Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM.
Dremel 432 Drum Sander Band Dremel 422 Felt Polishing Tip Dremel 408 Drum Sander Band
Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. Polishing point is made to take a semi-rough finish and polish it to a smooth finish on most ferrous metals, stones, glass and ceramics. Used with 401 mandrel. Do not run in excess of 30,000 RPM. Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM.
Dremel 430 Drum Sander Band Dremel 8193 Grinding Stone Dremel 480 Collet
Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237.
Dremel 83322 Grinding Stone Dremel 481 Collet Dremel 462 Polishing Point
Industrial abrasive made for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non ferrous metals or for working with conical and flat surfaces. Do not run in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237. Rubber polishing points are impregnated with abrasive and used on on ferrous metals to remove rough areas, small burrs and scratch marks. Point is ideal for cleaning and defining grooves.
Bosch Accessories 113 Engraving Cutters Dremel 932 Grinding Stone Dremel 952 Grinding Stone
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Specially designed for working with conic surfaces. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM.
Bosch 431  Oscillating Tool Accessories Dremel 561 Spiral Cutting Bit EZ-Lock 423E/423 Polishing Wheel
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8" shank. For rough shaping and smoothing wood and fiberglass. Ideal for removing rust from metal surfaces. Also ideal for shaping rubber surfaces. 1/4" bit diameter (6.4 mm). Pack of 6. Cuts wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. Do not run in excess of 30,000 RPM. Polish silverware to high luster, car detailing and restore door and window hardware. Compatible with all Dremel rotary tools, EZ402 EZ Lock mandrel and standard 402 mandrel (619.9400). Do not run in excess of 30,000 RPM.
Dremel 512E Finishing Abrasive Buff Dremel 540 Cut-Off Wheel BRUSH CARBON STEEL 3/4IN 2PK
For cleaning, light sanding and removing tarnish from brass. Use on metal, glass, wood, aluminum and plastics. For use with the EZ402 EZ lock mandrel (SKU #482.4447) or standard 402 mandrel (SKU #619.9400). Includes 2 fine 320 grit buffs. Easily cuts off slots bolts, screws, sheet metal, thin wood and plastic, trim castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No. 402 mandrel. Ideal for cleaning and removing rust and corrosion from items made of brass, copper, gold or other soft ferrous metals. Perfect for getting into hard to reach places like slots. You can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces.
BRUSH CARBON STEEL 1/2IN 2PK  Dremel 107 Engraving Cutter Dremel 407 Drum Sander Band
Ideal for cleaning and removing rust and corrosion. Use on items made of brass, copper, gold or other soft ferrous metals such as tools, door knobs, automobile parts and electrical contacts. Can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces and getting into hard to reach places like slots. Dremel Engraving Cutter, 3/32 in Diameter, 9-9/16 in Length, Ball Shape, 1/8 in Arbor/Shank, Carbon Steel, Silver, Applicable Materials: Wood, Fiberglass, Plastic and Soft Metals, 3/32 in Shank Diameter, Single Cut Tooth, For Engraving, Carving and Routing Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM.
Dremel 454 Precision Ground Sharpening Stone Dremel 455 Precision Ground Sharpening Stone Bosch 90930 Carbon Motor Brush
Used for sharpening chain saw blades, quickly and easily. Used for sharpening chain saw blades, quickly and easily. For No. 275, No. 285, and No. 395 Type 3, 4 and 5 Moto-Tools.
Dremel 953 Grinding Stone Dremel 453 Precision Ground Sharpening Stone DISC SANDING 240GRIT
DISC SANDING 240GRIT
Our Price: $5.92
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. Used for sharpening chain saw blades, quickly and easily. Great for light shaping and sanding. EZ Lock for faster accessory changes.
Dremel EZ Lock Finishing Abrasive Buff Set Dremel 420 Cut-Off Wheel WHEEL EMERY IMPREGNATED 1IN
Compatible with both No.EZ402 EZ lock mandrel and standard No.402 mandrel and all Dremel rotary tools. Refinish furniture, clean grills, remove paint, tarnish and more. Includes 2 buffs, 1 coarse, 180 grit and 1 medium, 280 grit. For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. Emery impregnated disc is ideal for general polishing of most ferrous metals, stones, glass and ceramics. Also ideal to clean and define grooves. Use it to remove small burrs and scratch marks left by grinding and sanding.
BRUSH NYLON BRISTLE 3/4IN 2PK BRUSH NYLON BRISTLE 1/8IN 2PK Dremel 199 High Speed Cutter
Ideal for light deburring, general cleaning and polishing in hard to reach places such as slotted surfaces. Long wearing nylon bristles. Can also be used for cleaning hard plastic such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. Ideal for light deburring, cleaning and polishing in hard to reach places such as slotted surfaces. Nylon bristles make it great for polishing silverware, jewelry and other precious metals. Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
BRUSH CARBON STEEL 1/8IN 2PK  Skil 80111 Gear Oil BRUSH STAINLESS STEEL 3/4IN
Versatile brush for removing rust and corrosion. For use on items made of brass, copper, gold or other soft ferrous metals such as tools, door knobs, automobile parts and electrical contacts. Can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces and getting into hard to reach places like slots. For all Worm Drive circular saws. Ideal for cleaning, deburring and surface finishing. Use on items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles.
BRUSH STAINLESS STEEL 1/2IN   BRUSH STAINLESS STEEL 1/8IN   BRUSH BRASS 3/4 INCH 2PK
Ideal for cleaning, deburring and surface finishing. Use on items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Ideal for cleaning, deburring and surface finishing items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Great for polishing and cleaning. Ideal for cleaning and surface finishing. Use on items made from gold, bronze, copper or brass. Use a brass brush to create a soft, sating or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel).
BRUSH BRASS 1/2 INCH 2PK      BRUSH BRASS 1/8 INCH 2PK      WHEEL SIC IMPREGNATED 1/2IN
Ideal for cleaning and surface finishing items made from gold, bronze, copper or brass. Use a brass brush to create a soft, satin or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel). Ideal for cleaning and surface finishing items made from gold, bronze, copper or brass. Use a brass brush to create a soft, satin or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel). Designed for light stock removal and high luster polishing. Works on a variety of surfaces including steel, aluminum, brass, silver, hard plastics, gold and other metals. Impregnated with silicone abrasive and lubricant. Eliminates the need for polishing compound.
Dremel 118 High Speed Cutter Dremel 124 Rotary Tool Bit Dremel 144 Rotary Tool Bit
Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
Dremel 193 High Speed Cutter Dremel 409 Cut-Off Wheel Quik-Change 4485 Collet Nut Kit
Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. Kit consisting of a special collet nut and four collets for use with a variety of Dremel tools, attachments and handpieces. Allows you to quickly change collets to accept bits with shanks of 1/32" to 1/8". Kit contains (1) each 1/8" Collet, 3/32" Collet, 1/16" Collet, 1/32" Collet and Collet Nut.
Dremel 7134 Abrasive Wheel Point Dremel 7144 Wheel Point Bit Dremel 502 Flap Wheel
High-speed cutter tipped with diamond particles tapered to a fine point for detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel. High-speed cutter tipped with diamond particles tapered to a bullet point for fine detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel. A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic.
Dremel 115 Rotary Tool Bit WHEEL KIT DIAMOND 3PIECE 3/4IN Dremel 504 Flap Wheel
Dremel Rotary Tool Bit, 5/16 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 25000 - 30000 rpm Maximum, Cylinder Shape, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes Diamond wheel kit includes (2) 3/4" (19.05 mm) diamond wheels and (1) 1/8" Mandrel. For cutting metal, glass, ceramics and plastics. Max rpm: 30,000. A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic.
Dremel 426 Cut-Off Wheel Dremel 503 Flap Wheel Dremel EZ471SA Detail Coarse Abrasive Brush
Fiberglass reinforced, use for slicing and cutting metal, wood and plastic.  Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic. For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
Dremel EZ472SA Detail Medium Abrasive Brush Dremel EZ473SA Detail Fine Abrasive Brush Dremel 654 Router Bit
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Do not run in excess of 30,000 RPM.
Dremel 9901 High Speed Cutter Dremel 9903 Rotary Tool Bit Dremel 9904 Rotary Tool Bit
Shapes, smooths or grinds especially hard materials such as hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 RPM. Shapes, smooths or grinds especially hard materials such as hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 RPM. Dremel Rotary Tool Bit, 3/32 in Diameter, 1/8 in Shank Diameter, Tungsten Carbide Cutting Edge, Applicable Materials: Stainless Steel, Hard Steel, Cast Iron, Ceramics, Non-Ferrous Soft Metal and Plastic, 35000 rpm Maximum, For Shaping, Smoothening and Grinding
Dremel 650 Router Bit Dremel Saw-Max Type 1A Cut-Off Wheel Dremel 192 High Speed Cutter
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Do not run in excess of 30,000 RPM. Cuts a variety of ferrous and nonferrous materials. 3/4" cut depth. .05" wheel thickness. For use on SKU# 454.6933. High speed versatile, carving and engraving cutter. Made of high quality steel for use on wood, plastic and soft metals. Ideal for shaping, hollowing, grooving, slotting and inlaying. Appropriate for curved surfaces. Bit diameter: 3/16" (4.8mm).
Dremel 125 Rotary Tool Bit Dremel 628-01 Drill Bit Set Dremel EZ Lock EZ Lock Mandrel
Dremel Rotary Tool Bit, 1/4 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 25000 - 30000 rpm Maximum, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes Bits are made of high speed steel and used for drilling into soft materials. Includes: 1/32", 3/64" bits (use #483 collet), 1/16" bit (use #482 collet), 5/64", 3/32" bits (use #481 collet) and 7/64", 1/8" bits (use #480 collet). One piece mandrel design simplifies the process of changing accessories and makes it easy to cut through a range of materials from metal to plastic. For use with exclusive EZ Lock Accessories.
Dremel 4486 Keyless Chuck Dremel EZ476 Cut-Off Wheel Dremel 615 Round Router Bit
Allows you to quickly and easily change accessory bits on  rotary tools 9.6V without changing collets. Accepts all accessory bits with 1/32" to 1/8" shanks. For cutting plastics. Compatible with all Dremel rotary tools. Pull-twist-release accessory changes. For use with the EZ402 EZ lock mandrel (SKU #482.4447). For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel.
Dremel Saw-Max Type 1A Cut-Off Wheel Black & Decker RT1022 Rotary Tool Accessory Kit Dremel 562 Tile Cutting Bit
Cuts a variety of materials such as wood, laminate flooring, drywall, PVC and plastic. 3/4" cut depth. .075" wheel thickness. For use on SKU# 454.6933. Universal system works on all rotary tools, including RTX and Wizard. Grinds, shapes and smooths most materials. Engraves most materials. Cuts nails, screws, bolts, chain, wire, pipe and closet maid shelving. High-speed cutter shapes ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes or create decorative wall tile by cutting a design.
Dremel 569 Grout Removal Bit Dremel EZ409 Cut-Off Wheel Dremel 9931 High Speed Cutter
Solid carbide bit removes wall and floor grout 3/8" below the face surface. Compatible with 275, 285, 395, 381, 398, and 380. Cuts through metal. Pull-twist-release accessory change. Use with either EZ402 (SKU #482.4447). Fast cutting, structured tooth-tape, for greater material removal on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile.
Dremel EZ456 Cut-Off Wheel Skil 95105L On/Off Replacement Wormdrive Switch Kit Dremel EZ Lock Grinding Wheel
One piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal. Cut off wheels labeled for easy identification. Compatible with all Dremel rotary tools . Replacement switch for Skil wormdrive models SHD77 (SKU #464.0025), and SHD77M (SKU #888.9016). Designed to flush-grind a surface. Domed shape and extra-thick reinforced aluminum oxide material allows the grinding wheel to be used on either its side or face for surface grinding, shaping, smoothing, deburring, rust removal sharpening, and flush-grinding. Applications include extended general-purpose grinding on metals, castings, welded joints, rivets and rust.  Use with either EZ402 (SKU #482.4447).
Bosch EZ407SA  Oscillating Tool Accessories Bosch 687-01 Rotary Tool Bit Set POINT SET DIAMOND 20PC 1/8INCH
The EZ drum mandrel makes sanding band changes easy; just pull, place and secure. The one-piece mandrel design simplifies the process of changing bands and makes it easy to sand flat surfaces and edges. Provides a quicker and easier alternative to using a traditional sanding mandrel. Allows for flat sanding and edge sanding. Compatible with all Dremel rotary tools. Compatible with all Dremel 1/2" sanding bands. Bit diameter 12.7 mm. Set contains: mandrel, (2) 1/2" felt polishing wheel, high-speed cutter, 1-1/4" fiberglass-reinforced cut-off wheel, aluminum oxide grinding stone, silicon carbide grinding stone, mandrel, nylon brush, (36) 409 15/16" emery cut-off wheel, 1/2" drum sander, 1/2" coarse sanding band, polishing compound, (2) 1/2" fine sanding band, (2) 1" felt polishing wheel and storage box. Applications: cutting, grinding, carving, engraving, shaping, sanding, cleaning and polishing.. 20 piece set with assorted shapes and sizes of nickel bonded diamond points. 1/8" (3.18mm) shank. Excellent for deburring, etching and smoothing of glass, plastic, ceramics and metals. Max rpm: 30,000.
Skil 95111L Replacement Wormdrive Assembly Dremel SM540 Circular Saw Blade Dremel EZ Lock Mandrel Starter Kit
For Skil wormdrive models SHD77 (SKU #464.0025), and SHD77M (SKU #888.9016). Cuts most tiles and masonry materials such as wall tile, floor tile, porcelain, slate, stone and cement backer board. 3/4" cut depth. .075 wheel thickness. For use on SKU# 454.6933. For cutting metal.  One-piece mandrel design simplifies process of changing cutting wheels, eliminates the need for screw and screwdriver. Effortless locking and loading, no tiny mandrel to lose. Compatible with all Dremel rotary tools. Includes No.EZ402 Mandrel and (5) No.EZ456 cutting wheels. Color code red. Do not run in excess of 35,000 RPM.
Dremel EZ544 Cut-Off Wheel Dremel A679-02 Sharpening Kit Dremel 543 Cutting Wheel
Use to cut 1/2" wood and laminate. Pull-twist-release accessory change. For use with the EZ402 EZ lock mandrel (SKU #482.4447). Guides help restore edge on garden tools, sharpens all lawn mower blades and sharpens dull, slow-cutting chain saw blades. Includes garden tool, lawn mower and chain saw sharpening attachment, gauge, spacers, wrench, (4) sharpening stones and instruction manual. Fits tool models 4000, 3000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 780, 770, and 7700. For use all dremel tools. Powerful shaping tool that quickly and efficiently removes material. Easily creates compound curves and works on a variety of materials including woods, fiberglass, laminates, plastic and leather.o.Cuts and finishes in one operation. Use the edge of the wheel for cutting and slotting. Use the "face" of the wheel for shaping. Cuts 33 percent deeper than former cutting/shaping wheels up to 1/2". DO NOT USE ON METAL
Dremel 545 Abrasive Wheel Dremel 565 Cutting Guide Kit Dremel A577 Rotary Detailers Grip Attachment Kit
Long lasting, does not break, will not lose it's shape. Coated with fine diamond particles, smooth fine cut. Hole design to minimize heat buildup. Applications: cutting, sawing, carving, sharpening and filing hard materials including marble, concrete, brick, porcelain, ceramics, hard epoxy, soft and hard wood. Includes: No. 402 mandrel. Provides controlled cuts in a variety of materials. Depth adjustment sets correct cutting depth up to 3/4". Easy screw-on mounting and large window provides excellent visibility. Specs: fits tool models 400, 398, 395, 300, 285, 275, 200, 100, 800 and 780. Includes: multipurpose cutting guide attachment, (2) drywall cutting bits, (1) multi purpose cutting bit and instructions. Offers enhanced grip and comfort for detailed applications. Provides optimal tool control when precision is required. Repositions the weight of the tool into the palm of your hand for a balanced feel and less fatigue. Attaches onto a rotary tool in place of its nose piece for quick and easy installation. Includes detailer's grip attachment, engraving cutter, tracing stencil and instructions.
Dremel Saw-Max Dome Shaped Type 27A Flush Cut Wheel TRACKER TICK TOOL/ EQUIPMT 1PK Dremel 662DR Core Glass Drilling Bit
For making flush cuts on a variety of materials such as wood, laminate flooring, drywall, PVC and plastic. Dome-shaped. 3/4" cut depth. .075" wheel thickness. For use on SKU# 454.6933. The Milwaukee Tick tool and equipment tracker is a versatile Bluetooth tracker with multiple attachment options and a low profile design. Users can glue, screw, rivet or strap on the Tick on anything. Weather, water and dust proof ratings ensure that the Tick Tool and Equipment Tracker will survive any environment. Using the One-Key network, the Tick will provide location updates when it comes within a 100' range of any phone with the One-Key app, providing the last seen date, time and location. Powered by a 3 volt Lithium-Ion coin cell battery that provides over 1 year of run time. The app will provide low battery alerts when the coin cell needs to be replaced. Dimensions: 2.13"L x 1.88"W x 0.49"H. Weight: 0.05 lbs. For use on glass, ceramic wall tile, glass block, glass bottles, and jewelry. For drilling in both flat and contoured surfaces. Diamond-impregnated cutting bit. Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed. Holes on the side of the bit allow the removal of material. Includes cutting oil and instructions.
Dremel 196 High Speed Cutter WHEEL EZ LOCK PREMIUM 1-1/2IN Skil 95104L Replacement Wormdrive Cord Assembly
A versatile, high quality cutter made of high grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. Appropriate for curved surfaces. 7/32" bit diameter (5.6 mm). Cutting wheel features a super abrasive grit called cubic boron nitride or CBN. CBN used on a cut-off wheel allows the wheel to remain sharp longer, stay cool and it won't shrink; wheels have constant diameter during use for a full range depth of cut. Lasts at least 20 times longer than our fiberglass reinforced cutting wheels based on internal testing. In addition, with the Dremel premium metal cutting wheel you'll spend less time changing wheels. Saves space storing replacement wheels and saves money buying replacement wheels. 35000 rpm. For use with the EZ402 EZ Lock Mandrel that makes accessory changes as easy as Pull - Twist - Release. 1-1/2" diameter; Kerf: 0.041". Blade Thickness: .40 Replacement cord for 120 volt skil circular saws. Heavy-duty with a 3-prong plug. 15 amp, 120 volt capacity. 8' cord.
Dremel EZ456B Cut-Off Wheel Dremel EZ Lock Mini Polishing/Sanding Kit KIT EZ SANDING/GRINDING DREMEL
Use to cut through metal. Pull-twist-release accessory change. Compatible with all Dremel rotary tools. For use with the EZ402 EZ lock mandrel (SKU #482.4447). Includes (3) 180, 280, & 320 grit abrasive buffs, (2) 36 & 120 grit detail abrasive wheels, (1) cloth polishing wheel and polishing compound. Sharpen lawn tools, remove rust, sand a sticker, engrave glass, plus more. Contains 31 genuine Dremel accessories for most every sanding, smoothing, shaping or grinding need. Includes a reusable storage box with removable organizer tray. Kerf: 0.05"; Blade thickness: 0.05"; Grit: 60, 120, 180 and 220. Color code: Blue.
Dremel 663DR Core Glass Drilling Bit Bosch 1550 Wood Burning Tool Quik-Lok 48-76-4008 Grade Hi-Flex Extension Cord
For use on glass, ceramic wall tile, glass block, glass bottles, and jewelry. For drilling in both flat and contoured surfaces. Diamond-impregnated cutting bit. Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed. Holes on the side of the bit allow the removal of material. Includes cutting oil and instructions. Features a high-efficiency bronze core heating element that heats quickly with a maximum tip temperature of 1,050 degrees F for burning and soldering capabilities. Tool stand protects tool from marking work surface. Ergonomic, stay cool design for control and comfort and a short shaft length for control of tip. Specs: 110/120 V/AC, watts 30/W, weighs 2.5 ozs. Includes: multipurpose tool, tool stand, convenient tip storage tube, general purpose tip, script tip, cutting tip, hot knife tip, soldering tip. Three wire grounded 8 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the 'Quik-Lok'cord feature. 5-15P NEMA type plug. 18 gauge; 10 A; 125 volts, 1250 W; Type S cord for Milwaukee tools with grounded 'Quick Lock' cords only.
Dremel 194 High Speed Cutter Dremel 568 Grout Removal Kit Dremel EZ Lock Abrasive Wheel
A versatile, high-quality cutter made of high grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. 1/8" bit diameter (3.2 mm). Attachments unique shape keeps the bit at the perfect cutting angle and keeps the cutting bit centered between the tiles, 30 degree cutting angle provides controlled cutting along the grout line. Special guides keep the bit centered between tiles. Large window for cut line visibility. Depth adjustment controls cutting depth up to 3/8" below the tile surface. Removes both wall and floor grout. Includes: grout removal attachment, 1/16" carbide grout removal bit and instructions. Cuts through metal. Pull-twist-release accessory change. Use with either EZ402 (SKU #482.4447).
Dremel 575 Right Angle Attachment Dremel EZ Lock Mini Cutting Kit Dremel Multipro Flexible Shaft
Coupling system allows you to rotate the attachment on your tool making hard to reach areas instantly accessible with the Right Angle Attachment. Specs: ball bearings and spiral bevel gears, quick connect system no tools required, compact, long-lasting and versatile. Fits tool models 400, 398, 395, 300, 285, 275, 800 and 780. Includes: right angle attachment and instructions. Includes (4) 1-1/2" metal-cutting wheels, (3) 1-1/2" thin-cut wheels and (3) 1-1/2" plastic cutting-wheels. Use with either EZ402 (SKU #482.4447). The flexible, 36" shaft attaches easily, new 5" bend radius provides more flexibility during use. Specs: comfort grip hand piece, integrated shaft lock button, Quick connect, accepts up to 1/8" shank accessories, works with collet system and the dremel chuck. Fits tool models 400, 398, 395, 300, 285, 275 and 800. Includes: flex shaft attachment, square drive nut and instructions
CUTTING SAW MULTI-PRPS KIT 7PC KIT ROTARY ASSY DREMEL 130PC  Dremel 709-01 Super Accessory Kit
Use to cut drywall, wood, plastic, metal, cement, brick, and more. Includes (7) genuine Dremel Saw-Max cutting wheels: (1) SM500 wood and plastic carbide wheel, (1) SM540 tile diamond wheel, (2) SM520 masonry cut-off wheels and (3) SM510 metal cut-off wheels. Inside this accessory set are assorted bits for cutting, carving, engraving, grinding, drilling, sharpening, sanding, cleaning and polishing. The kit consists of regular cut off wheels, sanding bands, sandpaper discs, felt polishing wheels, carbon steel brush, aluminum oxide grinding stones, silicon carbide grinding stones, dressing stone, mandrels, wrench and a re-usable storage case. Versatile and reusable accessory kit includes everything you need to cut, grind, sand, polish, drill, sharpen and clean. Includes:  1-1/4" cut off wheel, 3/4" carbon steel brush, polishing compound, (4)-four-1" felt polishing wheel, silicon carbide grinding stone, high speed cutter, 1/2"/60 grit sanding drum with mandrel, 1/4"/60 grit sanding band with mandrel, mandrel, wrench, aluminum oxide grinding stone, silicon carbide grinding stone, aluminum oxide grinding stone, (12)-twelve-15/16" emery cut off wheel, (12)-twelve-15/16" heavy duty emery .-cut off wheel, 1-1/4" fiberglass reinforced cut off wheel, (4)-four-small felt wheel, cone polishing tip, (6)-six-1/2"/60 grit sanding band, (12)-twelve- 3/4" 180 grit sanding disc, (12)-twelve- 3/4"/220 grit sanding disc, (12)-twelve- 3/4"/.240 grit sanding disc, (6)-six-1/4"/60 grit sanding band, (6)-six-1/2"/120 grit sanding band, (6)-six- 1/4"/ 120 grit sanding band, mandrel, dressing stone, bristle brush and 180 grit abrasive buff.
Dremel 670-01 Mini Saw Attachment KIT ACCESSORY ALL/PURP 160PC  Makita A-83951  Punch Nibbler
Attaches to the rotary tool in seconds with Quick Connect System. Specs: makes clean, straight perpendicular cuts up to 1/4" thick, angled throat allows for straight, perpendicular cuts, clear housing for better visibility, directional guide and lower guard retracts when not in use. Includes: mini saw attachment, rip/crosscut blade, drive adapter and instruction manual. Comes with re-usable storage case and 160 accessories. Lift out trays for easy organization of the included bits. This kit is ready for cutting, grinding, polishing, sanding, cleaning and more. The kit also includes sanding bands, sandpaper discs, polishing compound, felt polishing wheels, aluminum oxide grinding stone, silicone carbide grinding stone, mandrels, wire brush and wrench. A complete start-up kit offering a breadth of accessories helpful for a wide assortment of tasks. Replacement punch for Makita JN1601 metal nibbler. Designed to make clean and precise work in keystone plate, deck plate and other corrugated sheet materials.
COFFEE MAKER CORDLSS/CORDD 18V Essex Silver Line 7516D100 Sanding Disc Essex Silver Line 1218THKW Floor Stripping Pad 12 in L x 18 in W
For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit. For high gloss polishing where highest luster is desired. Use with sandscreen.
Essex Silver Line 1218THKB Floor Stripping Pad 12 in L x 18 in W Essex Silver Line 1218THKG Floor Stripping Pad 12 in L x 18 in W Essex Silver Line 7516D60 Sanding Disc
For heavy duty wet stripping of floors. For general duty scrubbing and spot removal on floors. For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit.
Dremel 220-01 Drill Press Essex Silver Line SL8 Velcro Sheet Essex Silver Line SL8 Velcro Sheet
Dremel 220-01 Drill Press
Our Price: $48.87
Drill press, tool holder and flex shaft holder all in one, drills accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 16 and 29 inches. Specs: base 56 square inches, drill depth 2 inches, fits tool models 275, 285, 300, 395, 398, 400, 780 & 800. Includes: work station attachment, mounting wrench and instructions. For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit. For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit.
Painteater 513040 Corded Finish Sander COMPRESSOR INFLATOR/AIR       Essex Silver Line 7516D40 Sanding Disc
COMPRESSOR INFLATOR/AIR
Our Price: $70.55
Use on wood, masonite, steel, brick and concrete. Removes paint and smoothes or feathers the edges for a better surface before painting. Lightweight. Gets in tight spaces. Flexible disc system enables disc to conform to uneven surfaces. Rotary action. No tools required to install/remove abrasive disc. Comes with a retractable handle with lock button and hand strap for holding in different positions. Disc size: 4.5" Specs: 120/AC, 60 HZ, 2000 RPM. Uses replacement disc 250.8356. For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit.
FAN JOBSITE W/AC ADPTR 18V    Essex Silver Line 17SC150 Screen-Bak Sanding Disc Screenbak 1218SC150 Sandpaper
Includes AC adapter. BATTERY NOT INCLUDED.  Circulates air over 40 ft., provides up to 17 hours of runtime on a Redlithium XC5.0 battery, adjustable head and 9 stopping positions, four keyhole hangers and two hanging holes allow for multiple hanging orientations. 20.29"L, 14.07 H, 7.15" W., 5.2 Lbs. 2,350 REMS high, 1,370 RPM low, 284 CFM airflow. For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings. For removing fine scratch marks prior to applying new coatings. For light sanding between surface coatings. Rental.
Essex Silver Line 1218100 Sandpaper Essex Silver Line 7516D20 Sanding Disc Essex Silver Line 17SC100 Screen-Bak Sanding Disc
20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings. For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit. For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings.
Essex Silver Line 121860 Sandpaper JOBSITE FAN CORDLESS 20V      Essex Silver Line 17SC80 Screen-Bak Sanding Disc
JOBSITE FAN CORDLESS 20V
Our Price: $115.60
20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings. Operate corded or cordless (extension cord sold separately). Multiple hanging options ? freestanding, hang hooks, tripod mount (sold separately), and wall mount. Wide-range, variable speed control. Provides up to 7 hours of runtime at maximum speed with 4.0 Ah Dewalt 20V Max battery. Specs:  12" L, 17? H, 6.7 Lbs., 500 CFM airflow. For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings.
Rockwell RK7323 Table Saw Screenbak 1218SC80 Sandpaper QEP 21660 Power Mixer With Paddle
Cuts wood, metal, plastic, aluminum and ceramic tile with ease. Sets up in seconds. Weighs only 13 lbs. 5.5 amp motor; 2,800 spm. 3/4" stroke length using a "T" shank jig saw blade. Includes blade holder, (5) T-shank assorted blades and allen key. For removing fine scratch marks prior to applying new coatings. For light sanding between surface coatings. Rental. Lightweight and impact resistant, variable speed dial controls RPM's, ergonomic handle grip, mix viscous materials with minimal effort. Specs: Motor: 110V/1300 Watts, 2-speed (1st gear) 180-460 RPM, (2nd gear) 300 -700 RPM, Weighs 13 lbs. Includes: (1) male threaded paddle specially designed to completely mix full bucket loads of viscous materials and a chuck kit for use with non-threaded mixer paddles.
Rockwell Corded Scroll Saw Essex Silver Line 121836 Sandpaper Dewalt DCT414S1 Infrared Thermometer Kit
Powerful 15 amp motor with 1.2 amp no load speed makes this a great machine for the workshop or the jobsite. Throat depth=16"; Stroke=4/5";  Cutting depth=2"; Table bevel =0-45 degrees left; Weight: 30.8 lbs; Dust blower; Dust port; Blade guard; Variable speed.  Accessories include ; Blade guard; Blade holder; Allen key; 2 blades:(1) 15 TPI;(1) 18TPI; 20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings. Features a LED hot (red) and cold (blue) spot indicator to quickly locate temperature changes, provides audio alarms to alert contractors in noisy work conditions. The IR thermometer measures temperatures from negative 20 degrees Fahrenheit to 932 degrees Fahrenheit, records maximum/minimum and average temperatures and features a bright green backlit display for easy-to-read recordings, has adjustable emissivity, offers accuracy across a wide range of materials. Includes: infrared thermometer, (1) 12V max Lithium-Ion battery, (1) 40 minute charger (1) kit box.
Milwaukee 2471-21 M12 Series Cordless Tube Cutters Milwaukee 2441-21 M12 Caulk and Adhesive Gun Kit Milwaukee 2457-21 Cordless Ratchet Kit
Close quarter rotating cutting head cuts pipe in confined spaces, automatic adjustment from 3/8"-1" tubing, auto locking mechanism delivers up to 200 cuts per charge, water resistant sealed metal cutter head, battery fuel gauge displays remaining run-time, built-in LED light illuminates line of cut. Specs: 12V, 500 RPM, trigger set:  cut/reset to open, copper cutting wheel, capacity 1/2" to 1-1/8" O.D., 14" long, weighs 3.2 lbs. Includes: (1) 12V Red Lithium battery, (1) 30 minute charger, (1) carrying case. Light, compact cordless powered caulk gun. With up to 400 lbs. of pushing force it easily dispenses everyday construction sealants and adhesives. The combination variable speed trigger and max speed dial allow for total application speed control. The 360 degree rotating collar delivers maximum control around turns. The tool also features auto reversing anti-drip, a seal puncture tool and durable hang hook for versatility on the job. Powered by the M12 Redlithium battery, the M12 will dispense up to 150 10 oz. tubes of building sealant on one charge. 30 minutes charge time. Weighs only 4.11 lbs. Kit comes with a battery and charger. Features compact low-profile head design: 3/4" head for tight spaces. Specs: 12 V, 35 ft-lbs torque, 250 RPM speed, 3/8" ball detent anvil, variable speed, metal trigger, on board fuel gauge, LED light, Red Lithium battery, 30 minute charge time and 19 lbs weight. Includes M12 Red Lithium battery, 3/8" to 1/4" adapter, 30-minute charger and carrying case.
M12 2446-21XC Cordless Grease Gun Kit M12 2470-21 Cordless Shear Kit Essex Silver Line 121820 Sandpaper
Delivers over 8,000 PSI maximum operating pressure for heavy duty applications and dispenses up to seven grease cartridges per battery charge. Also features a lightweight, ergonomic handle design for greater user comfort during prolonged use and an on board hose storage and shoulder strap loop for added convenience with less mess. Air bleeder valve priming mechanism for quick flow. High pressure flex hose with spring guard. Three way loading, bulk, cartridge, and suction. 14" long and 7.2 pounds. Kit includes 2446-20 grease gun, (1) M12 Lithium-Ion XC battery pack 48-11-2402, 30-minute charger, 36" flex hose with spring guard, grease coupler and carrying case. Variable speed trigger with reverse, cuts up to 2" schedule 40 PVC in 3 seconds, ultra sharp blade with pierce point, offset blade, quick return blade, all metal planetary drive delivers over 200 cuts per charge, stainless steel blade and aluminum jaw, impact, water and rust resistant, on board fuel gauge displays remaining run-time. Specs: 12V, 1,900 in/lbs torque, cut capacity:  2" PVC (2-3/8" O.D.), 3mm reinforced stainless steel blade, on board storage, 14-3/8" long, weighs 4.7 lbs. Includes: (1) M12 Red Lithium battery, (1) 30-minute charger, (1) carrying case. 20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings.
Essex Silver Line SL8 Velcro Sheet GREASE GUN KIT CORDLESS 20V   Milwaukee M18 Cordless Grease Gun Kit
For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit. Powerful motor delivers 10,000 max psi to power through clogged grease fittings. High volume pump pushes up to 5.0 oz/min high flow applications. Up to 16 cartridges per charge with a single Dewalt 20 volt max battery (4.0 Ah). Variable speed trigger offers precise control of the grease flow. 42" extra long and flexible hose designed for reaching hard to access grease fittings. Bright LED light assists in locating hard to see grease fittings in low light situations. Innovative pump filter screen prevents dirt and contamination from clogging the pump mechanism. Integrated no-mar foot design allows operators to rest the tool on flat surfaces. Air-bleeder valve assists in pump priming after cartridge changes. Cartridge capacity 14.5 oz. Tool weight 9.5 lbs.  Kit includes: Premium Li-Ion battery (4.0 Ah), a fast charger, shoulder strap and kit box. 18 volt, 2 speed grease gun kit delivers10,000 psi max operating pressure. Max flow rate of up to 10 oz./minute. Pre-set grease counter dial. 48" flexible hose offers greater access to difficult to reach fittings. Air bleeder valve for quick priming. Lock-on/Lock-off trigger dellivers added user convenience. 30 minutes charge time. Kit includes battery and charger.
RATCHET 2BATTERY 3/8IN        Essex Silver Line SL8 Velcro Sheet RATCHET 2BATTERY 1/4IN
RATCHET 2BATTERY 3/8IN
Our Price: $256.74
RATCHET 2BATTERY 1/4IN
Our Price: $266.12
FUEL technology and investment cast steel yoke housing provides greater durability for the professional user. Low profile head design allows users for more access in tight spaces. LED light illuminates the work area while the on-board fuel gauge displays remaining run time. Brushless motor delivers up to 2x longer motor life. Specs: 3/8" head, 12 V, 55 ft-lbs torque, 200 RPM speed. Includes: 3/8" Ratchet Tool, charger, carry case, and (2) 2.0Ah M12 batteries. For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit. FUEL technology and investment cast steel yoke housing provides greater durability for the professional user. Low profile head design allows users for more access in tight spaces. LED light illuminates the work area while the on-board fuel gauge displays remaining run time. Brushless motor delivers up to 2x longer motor life. Specs: 1/4" head, 12 V, 30 ft-lbs torque, 250 RPM speed. Includes: 1/4" Ratchet Tool, charger, carry case, and (2) 2.0Ah M12 batteries.
RATCHET 2BATTERY 1/2IN        DRAIN SNAKE TOOL ONLY 20V     Makita JN1601  Nibbler
RATCHET 2BATTERY 1/2IN
Our Price: $287.60
DRAIN SNAKE TOOL ONLY 20V
Our Price: $290.47
FUEL technology and investment cast steel yoke housing provides greater durability for the professional user. Low profile head design allows users for more access in tight spaces. LED light illuminates the work area while the on-board fuel gauge displays remaining run time. Brushless motor delivers up to 2x longer motor life. Specs: 1/2" head, 12 V, 60 ft-lbs torque, 175 RPM speed. Includes: 1/2" Ratchet Tool, charger, carry case, and (2) 2.0Ah M12 batteries. Clear drains with less setup. Removable drum accepts up to 3/8" x 35' cable for use in up to 3" pipes. Pivoting LED light with 3 brightness modes help provide illumination. Ergonomic handle for comfortable grip. Fixed outer shroud helps protect surfaces from rotating drum. Sliding nose cone allows for quick locking/releasing of cable. Variable speed trigger with drill-style inline forward/reverse. Includes Drain Snake and 5/16" x 25' Black Oxide Drain Cable with Bulb Head. Clean and precise work in keystone plate, deck plate and other corrugated sheet materials. Die rotates 360 degrees. Large 1/4" stroke. Ergonomic, slim body design for easy gripping. Extremely light (weighs only 3.6 lbs) for easy handling. Lock-on sliding switch for continuous operation. Built-in thickness gauge for convenience. Easy punch and die replacement for reduced down time. Double insulated. 2,200 strokes per minute. Minimum cutting radius for outside edge 2" outside edge; Inside edge 1-3/4". Overall length 10-1/4". Included wrench and hex wrench.
Milwaukee M12 Cordless Cable Cutter PEX EXPANSION TOOL KIT 20V    Dewalt Corded Scroll Saw
PEX EXPANSION TOOL KIT 20V
Our Price: $445.89
Powerful open jaws cut effortlessly through 600 MCM copper and 750 MCM aluminum. Blade geometry delivers a round and installation ready cut. Fits into tight panels for more effective cutting. (12 volt M12 Red Lithium battery Not Included) delivers more power per charge and more work over pack life. Auto release lever to cut, reload and quickly repeat for maximum productivity. 2-speed gear box delivers power for large cables and speed for common smaller cables. Built-in LED light illuminates the line of cut. Full trigger actuation for use in tight spaces. Automatic head action for even expansion. Dual-sided hang and belt hooks, Bright LED work light, rubber overmold and ergonomic grip. Spec: 3/8" - 1" PEX TYPE-A tubing, 3.93 lbs. weight. Speed: 60. Includes: DCE400 PEX Expander, (2) batteries, charger, (3) Expander Heads (1/2", 3/4", 1"), PEX Expander Grease, and kit box. Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16" x 23-3/4". Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Included.
Essex Silver Line SL-7 Corded Floor Edger with Hook and Loop Essex Silver Line SL-1218R Corded Floor Polisher Essex Silver Line SL-8V Line Floor Corded Sander with Hook and Loop
Oversized vacuum fan and chamber work together to achieve superior dust pick up. Light helps brighten dark corners and closets. Takes 7" x 5/16" standard paper attached with bolt and washer. Specs: accurately machined interchangeable parts of highly polished aluminum alloys, 1.5 hp motor with easy access brushes, 7" rubber filled disc runs at 3600 RPM with a free-wheeling non marking disc guard. All ball bearings are lubricated and sealed. 10" diameter, 13" H, and weighs 30 lbs. Includes 25' power cord with twist lock connectors and standard plug, dust bac and wrench. Orbital floor polisher has a 1hp, cast aluminum base with weight built into the chassis for low center of gravity, sealed Baldor motor protected from dust, fan cooled, thermal overload on motor, heavy duty rubber towers in four corners support the base and plate protecting the motor shaft and allowing for easier operation. Larger (5/8") orbital action, armature has a 50lb pre-load to absorb shock and start easier. NOTE: 12"x18" Essex Silver line 1218thkw thick white pad (550.9948) MUST be used with this item to ensure proper use and outcomes. Can be used for sanding, polishing, waxing, recoating on decks, floors and tile. Constant speed motor and soft rubber drum with unique Hook & Loop system. The slow constant speed of the drum and tilt action allows for more controlled and even sanding. Specs: 1.5 HP capacitor motor, 115 volt, AC only, 60 Cycle, single phase, runs on 11 amps. Drum - standard 8" width, high density foam rubber cover on aluminum core with Hook & Loop cover, takes 8x17-5/8" paper, drum speed - 1800 RPM, (constant speed), dimensions 28"Lx15"Wx34"H, weighs 115 lbs. Includes: 25 ft. power cord with twist lock connectors and standard plug, dust bag and wrenches.
   
 
1