Home > 3M > Adhesives > Non-Structural Adhesives > Sealants
Choose a sub category:
3M™ Polyurethane and Hybrid Adhesive Sealants Specific Use Sealants
Sort By:
1
  • 3M™ Smoke and Sound Sealant SS 100, White, 20 fl. oz., Sausage, 12/caseA high-performance flexible latex sealant designed to minimize sound transfer and prevent the spread of smoke. Designed to seal construction joints and through penetrations in non-fire-rated wall and floor assemblies. In addition, product acts as a draftstop to prevent unwanted air movement and provides a barrier against dust and other airborne particulates.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant IC 15WB+, 10.1 fl. oz., Cartridge, 12/caseEngineered to form a monolithic seal after drying, 3M™ Fire Barrier Sealant IC 15WB+ is a yellow, one-part, gun-grade, intumescent firestop sealant that provides up to 3-hour fire protection in tested and listed systems. This helps prevent the spread of fire, smoke and noxious gas, while also acting as an acoustic barrier to help minimize noise transfer.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant FD 150+ Blue, 10.1 fl. oz., Cartridge, 12/caseOur 3M™ Fire Barrier Sealant FD 150+ is a gun-grade, latex-based, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. When properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire and exhibits excellent adhesion to a full range of construction substrates.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant FD 150+ Limestone, 10.1 fl. oz., Cartridge, 12/caseOur 3M™ Fire Barrier Sealant FD 150+ is a gun-grade, latex-based, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. When properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire and exhibits excellent adhesion to a full range of construction substrates.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Water Tight Sealant 1000 NS, 10.1 fl. oz., Cartridge, 12/caseOur 3M™ Fire Barrier Water Tight Sealant 1000 NS is a ready-to-use, single component, neutral cure, silicone sealant that cures upon exposure to atmospheric humidity to form a flexible firestop seal. Our water tight sealants help control the spread of fire, smoke and noxious gases before, during and after exposure to fire.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Water Tight Sealant 1003 SL, 10.1 fl. oz., Cartridge, 12/caseOur 3M™ Fire Barrier Water Tight Sealant 1003 SL is a self-leveling silicone sealant firestop that creates a flexible seal and resists moisture across floors and other horizontal surfaces. This ready-to-use, single component neutral cure firestop is tested to ASTM and UL standards to help control the spread of fire, smoke and noxious gasses.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant CP 25WB+, 10.1 fl. oz., Cartridge, 12/caseWe formulated this fire sealant to dry and form a monolithic firestop seal that also acts as a barrier to airborne sound transmission. 3M™ Fire Barrier Sealant CP 25WB+ is a red, one-component, gun-grade, latex-based, intumescent firestop sealant. This fire barrier sealant helps control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Water Tight Sealant 3000 WT, 10.1 fl. oz., Cartridge, 12/case3M™ Fire Barrier Water Tight Sealant 3000 WT is a gun-grade, intumescent, silicone, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. Properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to fire and exhibits good adhesion to a full range of construction substrates.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant IC 15WB+, 20 fl. oz., Sausage, 10/caseEngineered to form a monolithic seal after drying, 3M™ Fire Barrier Sealant IC 15WB+ is a yellow, one-part, gun-grade, intumescent firestop sealant that provides up to 3-hour fire protection in tested and listed systems. This helps prevent the spread of fire, smoke and noxious gas, while also acting as an acoustic barrier to help minimize noise transfer.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant FD 150+Our 3M™ Fire Barrier Sealant FD 150+ is a gun-grade, latex-based, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. When properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire and exhibits excellent adhesion to a full range of construction substrates.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant FD 150+ Limestone, 20 fl. oz., Sausage, 12/caseOur 3M™ Fire Barrier Sealant FD 150+ is a gun-grade, latex-based, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. When properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire and exhibits excellent adhesion to a full range of construction substrates.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Silicone Sealant 2000+, 10.3 fl. oz., Cartridge, 12/case3M™ Fire Barrier Silicone Sealant 2000+ is an elastomeric, ready-to-use, single-component, neutral-cure silicone sealant that cures upon exposure to atmospheric humidity. We designed this sealant to form a flexible firestop seal that also acts as a barrier to airborne sound transmission. This product is firestop tested up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Water Tight Sealant 1003 SL, 20 fl. oz., Sausage, 12/caseOur 3M™ Fire Barrier Water Tight Sealant 1003 SL is a self-leveling silicone sealant firestop that creates a flexible seal and resists moisture across floors and other horizontal surfaces. This ready-to-use, single component neutral cure firestop is tested to ASTM and UL standards to help control the spread of fire, smoke and noxious gasses.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Water Tight Sealant 1000 NS, 20 fl. oz., Sausage, 12/caseOur 3M™ Fire Barrier Water Tight Sealant 1000 NS is a ready-to-use, single component, neutral cure, silicone sealant that cures upon exposure to atmospheric humidity to form a flexible firestop seal. Our water tight sealants help control the spread of fire, smoke and noxious gases before, during and after exposure to fire.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant CP 25WB+, 20 fl. oz., Sausage, 10/caseWe formulated this fire sealant to dry and form a monolithic firestop seal that also acts as a barrier to airborne sound transmission. 3M™ Fire Barrier Sealant CP 25WB+ is a red, one-component, gun-grade, latex-based, intumescent firestop sealant. This fire barrier sealant helps control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Water Tight Sealant 3000 WT, 20 fl. oz., Sausage, 12/case3M™ Fire Barrier Water Tight Sealant 3000 WT is a gun-grade, intumescent, silicone, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. Properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to fire and exhibits good adhesion to a full range of construction substrates.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant FD 150+, Blue, 28 fl. oz., Cartridge, 6/caseOur 3M™ Fire Barrier Sealant FD 150+ is a gun-grade, latex-based, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. When properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire and exhibits excellent adhesion to a full range of construction substrates.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant FD 150+Our 3M™ Fire Barrier Sealant FD 150+ is a gun-grade, latex-based, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. When properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire and exhibits excellent adhesion to a full range of construction substrates.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant CP 25WB+, 27 fl. oz., Cartridge, 6/caseWe formulated this fire sealant to dry and form a monolithic firestop seal that also acts as a barrier to airborne sound transmission. 3M™ Fire Barrier Sealant CP 25WB+ is a red, one-component, gun-grade, latex-based, intumescent firestop sealant. This fire barrier sealant helps control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant CP 25WB+, 2 gallon, Pail, 1/caseWe formulated this fire sealant to dry and form a monolithic firestop seal that also acts as a barrier to airborne sound transmission. 3M™ Fire Barrier Sealant CP 25WB+ is a red, one-component, gun-grade, latex-based, intumescent firestop sealant. This fire barrier sealant helps control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant FD 150+ Limestone, 4.5 gallon., Pail, 1/caseOur 3M™ Fire Barrier Sealant FD 150+ is a gun-grade, latex-based, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. When properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire and exhibits excellent adhesion to a full range of construction substrates.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant FD 150+, Blue, 4.5 gallon, Pail, 1/caseOur 3M™ Fire Barrier Sealant FD 150+ is a gun-grade, latex-based, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. When properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire and exhibits excellent adhesion to a full range of construction substrates.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant IC 15WB+, 4.5 gallon, Pail, 1/caseEngineered to form a monolithic seal after drying, 3M™ Fire Barrier Sealant IC 15WB+ is a yellow, one-part, gun-grade, intumescent firestop sealant that provides up to 3-hour fire protection in tested and listed systems. This helps prevent the spread of fire, smoke and noxious gas, while also acting as an acoustic barrier to help minimize noise transfer.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Sealant CP 25WB+, 5 gallon, Pail, 1/caseWe formulated this fire sealant to dry and form a monolithic firestop seal that also acts as a barrier to airborne sound transmission. 3M™ Fire Barrier Sealant CP 25WB+ is a red, one-component, gun-grade, latex-based, intumescent firestop sealant. This fire barrier sealant helps control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Water Tight Sealant 1000 NS, 4.5 gallon, Pail, 1/caseOur 3M™ Fire Barrier Water Tight Sealant 1000 NS is a ready-to-use, single component, neutral cure, silicone sealant that cures upon exposure to atmospheric humidity to form a flexible firestop seal. Our water tight sealants help control the spread of fire, smoke and noxious gases before, during and after exposure to fire.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Water Tight Sealant 1003 SL, 4.5 gallon, Pail, 1/caseOur 3M™ Fire Barrier Water Tight Sealant 1003 SL is a self-leveling silicone sealant firestop that creates a flexible seal and resists moisture across floors and other horizontal surfaces. This ready-to-use, single component neutral cure firestop is tested to ASTM and UL standards to help control the spread of fire, smoke and noxious gasses.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Water Tight Sealant 3000 WT, 4.5 gallon, Pail, 1/case3M™ Fire Barrier Water Tight Sealant 3000 WT is a gun-grade, intumescent, silicone, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. Properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to fire and exhibits good adhesion to a full range of construction substrates.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  • 3M™ Fire Barrier Silicone Sealant 2000+, 4.5 gallon, Pail, 1/case3M™ Fire Barrier Silicone Sealant 2000+ is an elastomeric, ready-to-use, single-component, neutral-cure silicone sealant that cures upon exposure to atmospheric humidity. We designed this sealant to form a flexible firestop seal that also acts as a barrier to airborne sound transmission. This product is firestop tested up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115.A broad line of firestop sealants used to prevent the spread of fire, smoke, toxic fumes and moisture. Good for both joint and through-penetration applications. Fire ratings of up to 4 hours. Re-enterable/repairable. Moisture cured. Available in nonslump and self leveling.
  •    
     
    1