Home > POWER TOOLS & ACC > POWER TOOLS > HOBBY TOOLS/ENGRAVERS > ROTARY HOBBY TOOLS
Sort By:
1
Irwin 61108 Economy Light Duty Rotary Masonry Drill Bit Irwin 61112 Economy Light Duty Rotary Masonry Drill Bit Irwin 5026000 Rotary Percussion Masonry Drill Bit
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Irwin 5026001 Rotary Percussion Masonry Drill Bit Irwin 61116 Economy Light Duty Rotary Masonry Drill Bit Irwin 5026002 Rotary Percussion Masonry Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Dewalt DW5224 Percussion Masonry Drill Bit Dewalt DW5221 Percussion Masonry Drill Bit BIT MASONRY PERCUSSION 1/8X3IN
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
Irwin 5026003 Rotary Percussion Masonry Drill Bit BIT MASONRY 5/32X4.5IN        Dewalt DW5222 Percussion Masonry Drill Bit
BIT MASONRY 5/32X4.5IN
Our Price: $3.23
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 61120 Economy Light Duty Rotary Masonry Drill Bit Dewalt DW5225 Percussion Masonry Drill Bit Western States 80240 Masonry Drill Bit
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile.
BIT MASONRY PERCSN 3/16X3/8IN Dewalt DW5223 Percussion Masonry Drill Bit Dewalt DW5227 Percussion Masonry Drill Bit
Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Western States 80241 Masonry Drill Bit Dewalt DW5228 Percussion Masonry Drill Bit Secure-Grip 48-20-8810 Hammer Drill Bit
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Western States 80242 Masonry Drill Bit BIT MASONRY PERCUSSION 1/4X4IN Bluegranite HCBG01 Hammer Drill Bit
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Western States 80244 Masonry Drill Bit Bluegranite HCBG02 Hammer Drill Bit Bluegranite HCBG03T/HCBG03 Hammer Drill Bit
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Secure-Grip 48-20-8811 Hammer Drill Bit Western States 80243 Masonry Drill Bit Irwin 5026006 Rotary Percussion Masonry Drill Bit
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
BIT MASONRY PERCUSSION 1/4X6IN Western States 80245 Masonry Drill Bit Bluegranite HCBG04 Hammer Drill Bit
Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Bluegranite HCBG06 Hammer Drill Bit Irwin 61124 Economy Light Duty Rotary Masonry Drill Bit BIT MASONRY PRCUSSION 5/16X6IN
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
Tapcon 11256 Masonry Drill Bit Irwin 326000 Rotary Percussion Masonry Drill Bit Irwin 326005 Rotary Percussion Masonry Drill Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Tapcon 11248 Masonry Drill Bit Irwin 326001 Rotary Percussion Masonry Drill Bit Irwin 326002 Rotary Percussion Masonry Drill Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Tapcon 11257 Masonry Drill Bit Tapcon 11247 Masonry Drill Bit Irwin 326008 Rotary Percussion Masonry Drill Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Irwin 326003 Rotary Percussion Masonry Drill Bit Irwin 326006 Rotary Percussion Masonry Drill Bit Secure-Grip 48-20-8816 Hammer Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Dewalt DW5230 Percussion Masonry Drill Bit BIT MASONRY PERCUSSION 3/8X6IN Tapcon 11363 Masonry Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.
Tapcon 11362 Masonry Drill Bit Irwin 5026009 Rotary Percussion Masonry Drill Bit Irwin 61128 Economy Light Duty Rotary Masonry Drill Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
Bluegranite HCBG09 Hammer Drill Bit Irwin 326009 Rotary Percussion Masonry Drill Bit Skil 80111 Gear Oil
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. For all Worm Drive circular saws.
Secure-Grip 48-20-8821 Hammer Drill Bit BIT MASONRY PERCUSSION 1/2X6IN Dremel 9924 Replacement Engraving Point
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Replaceable bit for the 290 Dremel (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving.
Irwin 61132 Economy Light Duty Rotary Masonry Drill Bit Irwin 50128 Percussion Masonry Drill Bit Irwin 326011 Rotary Percussion Masonry Drill Bit
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Bluegranite HCBG12 Hammer Drill Bit Secure-Grip 48-20-8800 Hammer Drill Bit Dewalt DW5234 Percussion Masonry Drill Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Artu 1006 1-Piece Concrete Screw Drill Bit Secure-Grip 48-20-8801 Hammer Drill Bit Secure-Grip 48-20-8805 Hammer Drill Bit
Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Artu 1014 1-Piece Concrete Screw Drill Bit Dewalt DW5235 Percussion Masonry Drill Bit Secure-Grip 48-20-8806 Hammer Drill Bit
Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Artu 1011 1-Piece Concrete Screw Drill Bit Dewalt DW5226 Percussion Masonry Drill Bit Irwin 5026015 Rotary Percussion Masonry Drill Bit
Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Bluegranite HCBG15 Hammer Drill Bit Artu 1021 1-Piece Concrete Screw Drill Bit Artu 1023 1-Piece Concrete Screw Drill Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards.
Cobra 589U Masonry Drill Bit BIT HAMMER DRILL 1/4X10X12IN  Dewalt DW5229 Percussion Masonry Drill Bit
Used in applications such as drilling in brick, cinder block and tile. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 5026011 Rotary Percussion Masonry Drill Bit Artu 1031 1-Piece Concrete Screw Drill Bit Secure-Grip 48-20-8830 Hammer Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Irwin 326015 Rotary Percussion Masonry Drill Bit Irwin 326007 Rotary Percussion Masonry Drill Bit Bluegranite HCBG16 Hammer Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Bluegranite HCBG08 Hammer Drill Bit Irwin 5026019 Rotary Percussion Masonry Drill Bit Artu 1041 1-Piece Concrete Screw Drill Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards.
Dewalt DW5231 Percussion Masonry Drill Bit Dewalt DW5241 Percussion Masonry Drill Bit Cobra 589Z Masonry Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Used in applications such as drilling in brick, cinder block and tile.
Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill
High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated).
Irwin 631 Jobber Length Drill Dewalt DW5236 Percussion Masonry Drill Bit BIT HAMMER DRILL 5/8X4X6IN
High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications.
Irwin 326019 Rotary Percussion Masonry Drill Bit BIT HAMMER DRILL 3/4X4X6IN    Bluegranite HCBG20 Hammer Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Irwin 326012 Rotary Percussion Masonry Drill Bit Skil 95105L On/Off Replacement Wormdrive Switch Kit Tapcon 11249 Masonry Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Replacement switch for Skil wormdrive models SHD77 (SKU #464.0025), and SHD77M (SKU #888.9016). Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.
Irwin 5026021 Rotary Percussion Masonry Drill Bit Dewalt DW5242 Percussion Masonry Drill Bit BIT HAMMER DRILL 3/8X10X12IN
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications.
Tapcon 11250 Masonry Drill Bit Irwin 631 Jobber Length Drill Bluegranite HCBG18T/HCBG18 Hammer Drill Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Irwin 631 Jobber Length Drill Irwin 326016 Rotary Percussion Masonry Drill Bit Dewalt DW5244 Percussion Masonry Drill Bit
High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Skil 95111L Replacement Wormdrive Assembly Bluegranite HCBG21 Hammer Drill Bit Irwin 326020 Rotary Percussion Masonry Drill Bit
For Skil wormdrive models SHD77 (SKU #464.0025), and SHD77M (SKU #888.9016). Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
DRILL BIT HAMMER 5/32X3X6IN   Irwin 631 Jobber Length Drill BIT HAMMER DRILL 1/2X10X12IN
Robust head for longer life. Various useable lengths. Milled u-flutes with deep cut-spiral for fast dust removal. Diamond ground carbide tip for precise starts to avoid scratching and skating in tile and hard stone. PowerGrip shank for aggressive gripping power. Shank diameter 0.1562; Diameter 5/32"; Flute length 3.0"; Overall length 6.0". High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications.
Dewalt DW5245 Percussion Masonry Drill Bit DRILL BIT HAMMER 3/16X4X6IN   Irwin 631 Jobber Length Drill
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Robust head provides longer life. Steel teeth that extend from the shank are designed to catch between the jaws of power tool chucks. Bit is easy to chuck in the tool and won't slip. Various useable lengths. Milled u-flutes with deep-cut spiral for fast dust removal. Diamond ground carbide tip for precise starts in tile and hard stone. PowerGrip shank for aggressive gripping power. High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated).
DRILL BIT HAMMER 1/4X4X6IN    Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill
PowerGrip shank for aggressive gripping power. Steel teeth extend from the shank to catch between the jaws of power tool chucks. Easy to chuck in the tool and won't slip. The tip of the BlueGranite turbo bit is Bosch carbide, diamond ground for precise starts to avoid scratching and skating in tile and hard stone. Robust head provides longer life. Various usable lengths. Milled u-flutes with deep-cut spiral for fast dust removal. Diamond ground carbide tip for precise starts in tile and hard stone. High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated).
Bluegranite HCBG22 Hammer Drill Bit Irwin 326022 Rotary Percussion Masonry Drill Bit ROTARY TOOL V-SPEED W/ACC
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. 1001 household, hobby and project uses: cut, saw, sand, grind, drill, polish, buff, sharpen, clean and more. Variable speed: 8000 - 30,000 rpm. 1/8" Collet accepts all standard rotary tool accessories. Separate on/off and speed control switches. Spindle lock for quick bit changes. Rated voltage: 120V/60 Hz, 1.0 Amp, No load speed: 8000 - 30,000 RPM, Collet size: 1/8". Weighs only 1.2 lbs. 40 piece accessory set includes: (10) aluminum oxide grinding stones, (7) cut-off wheels, (8) sanding discs, (1) aluminum oxide grinding wheel, (1) 1/2" sanding drum, (3) sanding bands, (2) felt polishing wheels, (3) engraving cutters, (2) mandrels, (1) 1/8" (3mm) drill bit, (1) dressing stone, (1) wrench and (1) accessory storage case.
Irwin 631 Jobber Length Drill Irwin 5026023 Rotary Percussion Masonry Drill Bit Bluegranite HCBG24 Hammer Drill Bit
High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Skil 95104L Replacement Wormdrive Cord Assembly Dremel 9929 Engraving Point TRACKER TICK TOOL/ EQUIPMT 1PK
Replacement cord for 120 volt skil circular saws. Heavy-duty with a 3-prong plug. 15 amp, 120 volt capacity. 8' cord. Use this point for continuous duty or commercial work. Can also be used for decorative engraving. Use on steel, chrome, titanium, granite, and other hard substrates. Use with Dremel 290 (619.9319) engraver. The Milwaukee Tick tool and equipment tracker is a versatile Bluetooth tracker with multiple attachment options and a low profile design. Users can glue, screw, rivet or strap on the Tick on anything. Weather, water and dust proof ratings ensure that the Tick Tool and Equipment Tracker will survive any environment. Using the One-Key network, the Tick will provide location updates when it comes within a 100' range of any phone with the One-Key app, providing the last seen date, time and location. Powered by a 3 volt Lithium-Ion coin cell battery that provides over 1 year of run time. The app will provide low battery alerts when the coin cell needs to be replaced. Dimensions: 2.13"L x 1.88"W x 0.49"H. Weight: 0.05 lbs.
Irwin 326024 Rotary Percussion Masonry Drill Bit Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill
Bit is shot peened, double tempered finish reduces breakage and chrome vanadiam spring steel shaft. The round shank fits all hammer drills with 3 jaw chuck; 1/2 inch shank. High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated).
Bluegranite HCBG26 Hammer Drill Bit Dremel 290 Electric Engraver Kit Irwin 326023 Rotary Percussion Masonry Drill Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Stroke adjustment dial regulates engraving depth from fine lines to deep grooves. Replaceable carbide points lets you engrave on most surfaces. Soft grip adds extra comfort and control. Letter/number template helps etch words and numbers. Light and compact design provides comfortable use for precision engraving performance. Amperage: 0.2; Hertz: 60; Speed: 7,200 (spm). Includes Engraver tool, Letter/number template and 9924 Carbide point. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Dremel 7000-N/5 2-Speed Rotary Tool Kit Irwin 631 Jobber Length Drill Irwin 326026 Rotary Percussion Masonry Drill Bit
Ready to go on a minute's notice. This 2-speed cordless alkaline tool is ideal for a variety of do-it-yourself jobs inside or out. Includes 5 accessories and a wrench. Rotates at 2 speeds: 6,000 rpm or 12,000 rpm. Weighs only 6 ounces. Requires 4 AA batteries, Not Included. High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). Bit is shot peened, double tempered finish reduces breakage and chrome vanadiam spring steel shaft. The round shank fits all hammer drills with 3 jaw chuck; 1/2 inch shank.
Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill Dewalt DW5249 Percussion Masonry Drill Bit
High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 326027 Rotary Percussion Masonry Drill Bit Irwin 631 Jobber Length Drill Quik-Lok 48-76-4008 Grade Hi-Flex Extension Cord
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). Three wire grounded 8 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the 'Quik-Lok'cord feature. 5-15P NEMA type plug. 18 gauge; 10 A; 125 volts, 1250 W; Type S cord for Milwaukee tools with grounded 'Quick Lock' cords only.
Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill North American Tool 51832 Corded Rotary Tool Kit
High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). Specs: 10,000 - 32,000 rpm, 135 W, and 60 Hz. Includes 10 grinder stone, 2 diamond bits, 3 mandrel, 36 cutting disk, sanding drum, 3 sanding drum paper, 4 polishing wheel, 2 drill bits, collet, wet stone, 36 sanding paper and spanner.
Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill Black & Decker RTX 3-Speed Rotary Tool Kit With Case
High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). Gets the job done faster and won't bog down under load. Flip-Lock spindle lock for quick and easy accessory changes. Universal collet accepts all standard rotary tool accessories. Soft grip for no-slip comfort and control. Three speeds: 12,000 rpm. 24,000 rpm and 30,000 rpm for the best results for each job.
Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill Makita A-83951  Punch Nibbler
High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). Replacement punch for Makita JN1601 metal nibbler. Designed to make clean and precise work in keystone plate, deck plate and other corrugated sheet materials.
DRILL BIT PERCUSN SET 7/8X12IN Irwin 631 Jobber Length Drill Dremel 100-N/7 Corded Rotary Tool Kit
Use to power through masonry, concrete, rock, and more with DEWALT Hammer Drill Bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a four flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Two cutter carbide tip maximizes carbide surface contact for longer bit life. High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). Lightweight, single speed tool with ball bearing construction allow for cool running, quiet, smooth operation. Specs Cord length 6', speed 35,000 rpm, voltage 120 AC/50-60 Hz. Includes  Mandrel, coarse 1/2", sanding drum, dressing stone, heavy duty emery cut off wheel, 1/2" 120 grit sanding band, aluminum oxide grinding stone, silicon carbide grinding stone.
Irwin 631 Jobber Length Drill Essex Silver Line 7516D100 Sanding Disc Essex Silver Line 7516D60 Sanding Disc
High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit. For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit.
Essex Silver Line 1218THKW Floor Stripping Pad 12 in L x 18 in W Essex Silver Line 1218THKB Floor Stripping Pad 12 in L x 18 in W Essex Silver Line 1218THKG Floor Stripping Pad 12 in L x 18 in W
For high gloss polishing where highest luster is desired. Use with sandscreen. For heavy duty wet stripping of floors. For general duty scrubbing and spot removal on floors.
Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill Irwin 631 Jobber Length Drill
High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated). High speed steel with M-35, five percent cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated).
Dremel 200-1/21 Corded Rotary Tool Kit Essex Silver Line SL8 Velcro Sheet Dremel 3000/300-1/24 Corded Rotary Tool Kit
Multipurpose cutting guide attachment, used for multiple applications on a variety of materials. Specs: 15,000 or 35,000 RPM, voltage 120/AC, 50-60/Hz, 6 ft. cord. Includes: 21 genuine Dremel accessories. For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit. Lightweight, comfort grip housing with variable speed, circle cutter/straight edge guide. Specs: voltage 120/AC, 50-60/Hz, 5,000 to 35,000 RPM, 6 ft. cord. Includes: storage case and 24 accessories.
Essex Silver Line SL8 Velcro Sheet Painteater 513040 Corded Finish Sander Dremel 8000-03 Cordless Rotary Tool Kit
For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit. Use on wood, masonite, steel, brick and concrete. Removes paint and smoothes or feathers the edges for a better surface before painting. Lightweight. Gets in tight spaces. Flexible disc system enables disc to conform to uneven surfaces. Rotary action. No tools required to install/remove abrasive disc. Comes with a retractable handle with lock button and hand strap for holding in different positions. Disc size: 4.5" Specs: 120/AC, 60 HZ, 2000 RPM. Uses replacement disc 250.8356. 8 volt Lithium-Ion cordless rotary tool is ideal for hands on projects around the home such as finishing, intricate sanding, polishing, cleaning, engraving and more. Variable speed control allows you to set the speed of the tool to match a particular accessory to the task at hand and is designed to be used with all Dremel accessories and most threaded attachments. Variable speed from 5,000 to 33,000 rpm to match the proper speed required. High capacity battery for longer run time. Comfort grip housing for easier handling and better tool control. Includes: 401 Mandrel, 402 Mandrel, 403 Bristle brush, 407 1/2" Drum sander, 414 Felt polishing wheel (2), 421 Polishing compound, 445 1/2" 240 Grit sanding band (2), 408 1/2" 60 Grit sanding band (3), 432 1/2" 120 Grit sanding band (3), 540 1-1/4" Cut-off wheel (3), 84922 Silicon carbide grinding stone, 932 Aluminum oxide grinding stone, 952 Aluminum oxide grinding stone and wrench.
Essex Silver Line 7516D40 Sanding Disc COMPRESSOR INFLATOR/AIR       FAN JOBSITE W/AC ADPTR 18V
COMPRESSOR INFLATOR/AIR
Our Price: $77.21
For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit. M12 Compact Inflator delivers fast, accurate, easy inflation with the portability to take anywhere. With Capable to complete demanding applications like car, LT truck, and compact equipment tires, the M12 Compact Inflator gives users ultimate power and efficiency. Rated to deliver over 120 PSI. The high efficiency motor and pump top-off car tires in under 1 minute. The TrueFill auto shut-off technology delivers highly accurate pressure, protects from overfill, and automatically senses speed of fill to deliver precise shut-off at the desired PSI. Additionally, the unit includes a large easy to read back-lit LCD, anti-vibration feet, and 26" hose with an all brass Schrader chuck. Includes: (1) ball inflation needle, (1) Presta Chuck, (1) Schrader chuck and (1) inflator nozzle. Includes AC adapter. BATTERY NOT INCLUDED.  Circulates air over 40 ft., provides up to 17 hours of runtime on a Redlithium XC5.0 battery, adjustable head and 9 stopping positions, four keyhole hangers and two hanging holes allow for multiple hanging orientations. 20.29"L, 14.07 H, 7.15" W., 5.2 Lbs. 2,350 REMS high, 1,370 RPM low, 284 CFM airflow.
Essex Silver Line 17SC150 Screen-Bak Sanding Disc Dremel 4000-2/30 Corded Rotary Tool Kit Screenbak 1218SC150 Sandpaper
For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings. Variable speed for greater versatility. High performance motor for maximum performance at all speeds. Electronic feedback for consistent speed under load. Can be used with all Dremel accessories and attachments. Specs: Cord length 6', speed 5,000 to 35,000 rpm, voltage 120 AC/50-60 Hz, weight 18.8 oz. Includes: Dremel 4000 rotary tool, circle cutter/straight edge guide, sanding/grinding guide, storage case, quick start book. For removing fine scratch marks prior to applying new coatings. For light sanding between surface coatings. Rental.
Essex Silver Line 1218100 Sandpaper Essex Silver Line 7516D20 Sanding Disc Essex Silver Line 17SC100 Screen-Bak Sanding Disc
20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings. For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit. For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings.
INFLATOR AIR CORDLESS 20V     Essex Silver Line 121860 Sandpaper ROTARY TOOL VARIBLE SPEED
INFLATOR AIR CORDLESS 20V
Our Price: $110.09
ROTARY TOOL VARIBLE SPEED
Our Price: $114.60
Can run on any one of three power sources for maximum versatility: 20V MAX battery, 12V DC, or 110V AC. Use on jobsite, or on the go. Features a high-pressure rubber hose for durability. The threaded chuck and included onboard accessories make it easy to inflate items from tires to footballs. Setting desired air pressure is simple with the digital gauge, and the auto-shutoff provides accurate inflation. The high-volume hose allows fast inflation of mattresses and other inflatables with the push of a button. Move the hose to the deflation port for quick and easy take down. An onboard LED light helps to provide illumination in dark spaces. Heavy-duty rubber feet help reduce walking while in use. Includes: Air inflator, 12V DC power cord, high-pressure tapered nozzle, Presta valve adapter, and inflator needle. Battery, charger and AC power adapter sold separately. 20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings. Allows tool-less and collet-less accessory changes with the inclusion of the three jaw chuck. The chuck accepts all Dremel accessory shank sizes for fast and convenient accessory changes without ever using a wrench. Featuring the all new Pivot Light, your projects are will lit with an optimum line of sight since the light pivots to direct illumination where you want it. Variable speed and electronic feedback circuitry. The slim, ergonomic body design provides a comfortable 360 degree grip zone no matter how you hold it for extended ease of use. The completely redesigned air flow system lets the Dremel 4300 run cool, quiet and smooth so completing projects are more enjoyable than ever. 6' cord. Variable speed: 5,000 - 35,000 rpm.
JOBSITE FAN CORDLESS 20V      Milwaukee 2460-21 M12 Cordless Rotary Tool Kits Essex Silver Line 17SC80 Screen-Bak Sanding Disc
JOBSITE FAN CORDLESS 20V
Our Price: $115.60
Operate corded or cordless (extension cord sold separately). Multiple hanging options ? freestanding, hang hooks, tripod mount (sold separately), and wall mount. Wide-range, variable speed control. Provides up to 7 hours of runtime at maximum speed with 4.0 Ah Dewalt 20V Max battery. Specs:  12" L, 17? H, 6.7 Lbs., 500 CFM airflow. Compact and lightweight. Tool runs from 5,000-32,000 RPM. Managed by a variable speed dial for fluid control. 1/8" Collet is compatible with all 1/32" - 1/8" shank accessories providing the user access to any cutting, grinding, sanding and polishing solutions. Includes rotary tool, M12 Redlithium battery, 5 cutting wheels and mandrel, wrench and 30-minute charger and carrying case. For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings.
Screenbak 1218SC80 Sandpaper Black & Decker BDCD220IA-1 Cordless Drill Kit DRILL/DRVR KIT CMB LT-ION 20V
For removing fine scratch marks prior to applying new coatings. For light sanding between surface coatings. Rental. Drill/driver features 310 in-lbs of torque, two speed gear box for increased versatility, LED work light, 11 position clutch is lightweight for easier use. Impact driver features high performance transmission (torque 1375). Compact and lightweight for ease of use and Quick Release 1/4" hex chuck. Includes (1) LDX220 drill/driver, (1) BDC1202 Impact driver, (1) 20 volt max battery, (1) charger, (2) screwdriver bits and (1) soft bag. Compact, lightweight and powerful. Powered by lithium-ion; more power and double the run time of ni-cad. Batteries hold a charge for up to 18 months in storage. Includes drill, impact driver, (2) 20 volt batteries, charger, storage bag and (1) #2 Phillips bit. DRILL/DRIVER; high performance motor produces up to 350 in-lbs of torque. Variable speed trigger switch. 3/8" (10mm) single sleeve keyless chuck. 22 torque/clutch settings. Two variable speed ranges for versatility (0-350/0-1300 RPM). Built in LED work light. On-board battery power indicator. Electric brake. IMPACT DRIVER; 1/4" hex quick change locking collet. Variable speed switch (0-2200 rpm). Rubberized non-slip pistol grip. Cast aluminum gear housing. Incredible 1062 in-lbs of torque. Built-in LED work light. On-board battery power indicator. Electric brake.
QEP 21660 Power Mixer With Paddle Dremel 4000-6/50 Corded Rotary Tool Kit DRILL/DRIVER 12V KIT LITH-ION
Lightweight and impact resistant, variable speed dial controls RPM's, ergonomic handle grip, mix viscous materials with minimal effort. Specs: Motor: 110V/1300 Watts, 2-speed (1st gear) 180-460 RPM, (2nd gear) 300 -700 RPM, Weighs 13 lbs. Includes: (1) male threaded paddle specially designed to completely mix full bucket loads of viscous materials and a chuck kit for use with non-threaded mixer paddles. Variable speed rotary tool with a slim, ergonomic body provides a 360-degree grip zone for comfort and control in any grip position. Tool can use all existing Dremel accessories and attachments plus high-performance attachments to complete the widest range of projects. Specs: Amperage 1.6 amps, Cord Length 6 ft., Speed 5,000 to 35,000 RPM, Voltage 120 AC, 50-60 Hz,Weight (lbs.) 18.8 oz. Includes: 50 assorted accessories 3/8" driver-drill with 2 speeds (0-450 and 0-1,700 rpm) delivers up to 210 in. lbs of max torque. Features a compact design at only 7-716" long and weighs only 2.8 lbs with battery for reduced operator fatigue. Impact Driver with variable speed (0-2,600 rpm and 0-2,400 ipm) delivers up to 970 in. lbs of max torque. Features a compact design at only 6-1/8" long and weighs only 2.2 lbs with battery for reduced operator fatigue. Ergonomically designed handles with rubberized soft grips provide increased comfort. 12 volt slide battery design enables tool to stand for convenience. 12 volt compact Lithium -Ion 2.0 Ah battery BL1021B features in integrated L.E.D. battery charge level indicator. Built-in L.E.D. light illuminated the work area. Part of the expanding 12 volt CXT series, combining performance with superior ergonomics in a compact size. Not compatible with 12 volt max pod-style tools, batteries and chargers. The 2 piece combo kit includes: (1) 12 volt max CXT Impact Driver (Tool Only) (DT03Z), (1) 12 volt max CXT 3/8" Driver-Drill (Tool Only) (FD05Z), (1) 12 volt max CXT Lithium-Ion charger (DC10WD), (2) 12 volt max CXT Lithium-Ion 2.0 Ah batteries (BL1021B) and (1) tool case.
Porter-Cable PCCK604L2  Cordless Impact Drill/Driver Kits Dewalt DCT414S1 Infrared Thermometer Kit Hitachi KC10DFL2  Cordless Impact Drill/Driver Kits