Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > MISC HAND POWER TOOLS & ACC
Sort By:
1
BIT MASONRY IMP RDY 5/32X4X6IN Irwin 1870541 1-Piece Impact Masonry Bit Irwin 1870542 1-Piece Impact Masonry Bit
Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. For use in impact drivers. 2 cutter heads. Impact ready. Percussion rates. Carbide tipped cutting edge material. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Irwin 1870543 1-Piece Impact Masonry Bit Dewalt DW2572 Masonry Drill Bit Irwin 1870544 1-Piece Impact Masonry Bit
Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Irwin 1870545 1-Piece Impact Masonry Bit Dewalt DW2573 Masonry Drill Bit Irwin 1870546 1-Piece Impact Masonry Bit
Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
BIT MASONRY IMP RDY 3/16X4X6IN Irwin 1870547 1-Piece Impact Masonry Bit Skil 80111 Gear Oil
Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. 1/4" hex shank for use in impact drivers. 2 cutter heads. Impact ready. Percussion rates. Carbide tipped cutting edge material. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. For all Worm Drive circular saws.
Dewalt DW2574 Masonry Drill Bit BIT MASONRY IMPT RDY 1/4X4X6IN Tapcon 1870565 1-Piece Impact Drill Bit
Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping. Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. 1/4" hex shank for use in impact drivers. 2 cutter heads. Impact ready. Percussion rated. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Tapcon 1870567 1-Piece Impact Drill Bit Tapcon 1870566 1-Piece Impact Drill Bit Tapcon 1870568 1-Piece Impact Drill Bit
Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Tapcon 1870569 1-Piece Impact Drill Bit Skil 95105L On/Off Replacement Wormdrive Switch Kit BIT DRILL W/CS 13PC 1/16-1/4IN
Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Replacement switch for Skil wormdrive models SHD77 (SKU #464.0025), and SHD77M (SKU #888.9016). Super hard coating reduces friction and heat build-up and 135 degree split point eliminates the need for a center punch and keeps the drill from skating on the hard materials. All sizes 3/16" and larger have 3 flats on the shank for a better chuck to drill bit grip. All sizes 13/32" and above have a 3/8" reduced shank. Includes (1) each: 1/6", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4" and case with pilfer proof tab.
Skil 95111L Replacement Wormdrive Assembly Dewalt DW2571 Rotary Drill Bit Set Dewalt DW1363 Drill Bit Set
For Skil wormdrive models SHD77 (SKU #464.0025), and SHD77M (SKU #888.9016). Carbide tipped for applications such as drilling in brick, block and concrete, rapid load quick change; universal 1/4" hex shank prevents slipping. Includes (1) one each: 5/32", 3/16", and 1/4" bits. Made of industrial grade steel with extra hard titanium coating for maximum service. Split point drill bits used in applications such as drilling in light gauge metals. Includes: 1/16", 5/64", (2) 3/32", 7/64", (2)1/8", 9/64", 5/32", 3/16", 7/32", 1/4" and case.
BIT DRILL TITANIUM SET 17PC   BATTERY NI-CAD 18VOLT         ROTARY TOOL V-SPEED W/ACC
Super hard coating reduces friction and heat build-up. Surface drills cooler, lessens torque and downward drilling pressure. All sizes 3/16" and larger have 3 flats on the shank for a better grip on the drill bit. All sizes 13/32" and above have a 3/8" reduced shank; 135 degree split point eliminates the need for a center punch and keeps the drill from skating. Includes (1) one each: 5/64", 3/32", 7/64", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 5/16", and 3/8" and (2) two each: 1/16", 1/8", plastic case with rubberized grip panels. Replacement battery for GCD18BK and GCD18CP. 1001 household, hobby and project uses: cut, saw, sand, grind, drill, polish, buff, sharpen, clean and more. Variable speed: 8000 - 30,000 rpm. 1/8" Collet accepts all standard rotary tool accessories. Separate on/off and speed control switches. Spindle lock for quick bit changes. Rated voltage: 120V/60 Hz, 1.0 Amp, No load speed: 8000 - 30,000 RPM, Collet size: 1/8". Weighs only 1.2 lbs. 40 piece accessory set includes: (10) aluminum oxide grinding stones, (7) cut-off wheels, (8) sanding discs, (1) aluminum oxide grinding wheel, (1) 1/2" sanding drum, (3) sanding bands, (2) felt polishing wheels, (3) engraving cutters, (2) mandrels, (1) 1/8" (3mm) drill bit, (1) dressing stone, (1) wrench and (1) accessory storage case.
Skil 95104L Replacement Wormdrive Cord Assembly TRACKER TICK TOOL/ EQUIPMT 1PK Irwin 1881078 1-Piece Impact Drill Bit Set
Replacement cord for 120 volt skil circular saws. Heavy-duty with a 3-prong plug. 15 amp, 120 volt capacity. 8' cord. The Milwaukee Tick tool and equipment tracker is a versatile Bluetooth tracker with multiple attachment options and a low profile design. Users can glue, screw, rivet or strap on the Tick on anything. Weather, water and dust proof ratings ensure that the Tick Tool and Equipment Tracker will survive any environment. Using the One-Key network, the Tick will provide location updates when it comes within a 100' range of any phone with the One-Key app, providing the last seen date, time and location. Powered by a 3 volt Lithium-Ion coin cell battery that provides over 1 year of run time. The app will provide low battery alerts when the coin cell needs to be replaced. Dimensions: 2.13"L x 1.88"W x 0.49"H. Weight: 0.05 lbs. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One-piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
DRIL BIT ST TTNM PP 14PC 1/2IN Dewalt DW1341 Speed Tip Drill Bit Set POWER SOURCE CORDLS LI-ON 18V
Titanium pilot point for longer life. Starts on contacts for cleaner holes. No spin shanks. Ideal for drilling in wood and plastic. Includes bit sizes: (2) 1/16", 5/64", 3/32, 7/64", (2) 1/8", 9/64", 1/2", 3/8", 5/18", 1/4", 3/16", 5/32", and a plastic tough case. Titanium coating for longer life. Speed tip reduces walking on start. Ideal use in commercial and residential applications for drilling in metal, wood and plastics. No spin shanks keeps the bit secure in the drill . Included tough case container to keep bits organized. Set includes bits sized from 1/16 to 1/2''. Charges up to 2 USB compatible electronic devices where AC power is not available. 2.1A output from each USB port, 4.2A total output when both USB ports are connected. Built-in belt clip attaches to belt or holster.
Dremel 7000-N/5 2-Speed Rotary Tool Kit Quik-Lok 48-76-4008 Grade Hi-Flex Extension Cord Thunderbolt 48-89-0011 Drill Bit Set
Ready to go on a minute's notice. This 2-speed cordless alkaline tool is ideal for a variety of do-it-yourself jobs inside or out. Includes 5 accessories and a wrench. Rotates at 2 speeds: 6,000 rpm or 12,000 rpm. Weighs only 6 ounces. Requires 4 AA batteries, Not Included. Three wire grounded 8 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the 'Quik-Lok'cord feature. 5-15P NEMA type plug. 18 gauge; 10 A; 125 volts, 1250 W; Type S cord for Milwaukee tools with grounded 'Quick Lock' cords only. Thunderbolt web, provides longer life and faster driller times. Parabolic flute, clears chips faster. 135 degree split point, precision start no walking. Titanium coating keeps the bits sharp. 14 piece Thunderbolt Titanium Coated drill bit set contains: (1) 1/16", (1) 5/64", (1) 3/32", (1) 7/64", (2) 1/8", (1) 9/64", (1) 5/32", (1) 3/16", (1) 7/32", (1) 1/4", (1) 5/16", (1) 3/8" and (1) 1/2".
Dewalt DW9057 Compact Battery Pack Black & Decker HPB12 Spring Loaded Slide Battery Pack FireStorm FSMVC Fast Battery Charger
For use with the entire line of Dewalt 7.2 Volt tools except for Univolt tools.. Provides up to 500 recharges, spring-loaded. For use with all spring-loaded battery style FireStorm and Black and Decker products. Maintenance mode, fast charging feature, multi-voltage charging lets you charge multiple slide-pack batteries up to 24V with one charger. Fast charging feature recharges slide-pack batteries in ninety minutes or less. Charges all FireStorm and Black and Decker spring-loaded style batteries 9.6V through 24V.
M18 49-24-2371 Power Source North American Tool 51832 Corded Rotary Tool Kit Black & Decker RTX 3-Speed Rotary Tool Kit With Case
Powered USB port charges cell phones, mp3 players, digital cameras and other portable electronic devices. Compatible with M18 Compact and XC batteries. Also compatible with M12 Heated Jackets with the expandable battery pocket. Specs: 10,000 - 32,000 rpm, 135 W, and 60 Hz. Includes 10 grinder stone, 2 diamond bits, 3 mandrel, 36 cutting disk, sanding drum, 3 sanding drum paper, 4 polishing wheel, 2 drill bits, collet, wet stone, 36 sanding paper and spanner. Gets the job done faster and won't bog down under load. Flip-Lock spindle lock for quick and easy accessory changes. Universal collet accepts all standard rotary tool accessories. Soft grip for no-slip comfort and control. Three speeds: 12,000 rpm. 24,000 rpm and 30,000 rpm for the best results for each job.
BATTERY LI-ION 12V GLCD122P   Firestorm PS130 Battery Pack Makita A-83951  Punch Nibbler
Replacement battery for Genesis GLCD122P, GLID12B and combo kit GL12DIDK2. For use with FireStorm and other Black and Decker 12V products with battery design that fits up inside (stem type) the actual tool. Replacement punch for Makita JN1601 metal nibbler. Designed to make clean and precise work in keystone plate, deck plate and other corrugated sheet materials.
Skil SB18A Rechargeable Battery Pack Skil 120BAT Dual Source Battery Pack BATTERY REPLACEMENT LI-ION 20V
Slide style, holds a charge for up to 18 months. Recharges in 1 hour, 1.2 Ah, for Skil 12V tools (model No. 2467 02, 2468 04, and 2467 03). Replacement 20 volt Lithium-Ion battery pack for Genesis Lithium-Ion cordless tools, Including GLCD2038A and GLID20A. 1500 mAH.
Firestorm PS140 Battery Pack ADAPTER BATTERY 18-20VOLT     BIT DRILL TITANIUM SET 21PC
For use with FireStorm and other Black and Decker 12V products with battery design that fits up inside (stem type) the actual tool. Allows for use of 20 volt max compact batteries in most DeWalt 18 volt tools. Adapter will not fit into DeWalt 18 volt chargers. Requires use of DeWalt 20 volt max charger. Battery and charger sold separately. Super hard coating reduces friction and heat build-up, lasts longer than standard drills. Surface drills cooler, lessens torque and downward drilling pressure. All sizes 3/16" and larger have 3 flats on the shank for a better grip on the drill bit. All sizes 13/32" and above have a 3/8" reduced shank. The 135 degree split point eliminates the need for a center punch and keeps the drill from skating on the hard materials. Includes (1) one each: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/16", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8" and metal case with pilfer proof tab.
Black & Decker HPB14 Spring Loaded Slide Battery Pack Black & Decker HPB18 Spring Loaded Slide Battery Pack Skil 180BAT Rechargeable Type O Battery Pack
Provides up to 500 recharges, spring-loaded. For use with all spring-loaded battery style FireStorm and Black and Decker products. Provides up to 500 recharges, spring-loaded. For use with all spring-loaded battery style FireStorm and Black and Decker products. Pod style 1.2 Ah,  recharges in 1 hour.
Dremel 100-N/7 Corded Rotary Tool Kit Skil 144BAT Dual Source Battery Pack Essex Silver Line 7516D100 Sanding Disc
Lightweight, single speed tool with ball bearing construction allow for cool running, quiet, smooth operation. Specs Cord length 6', speed 35,000 rpm, voltage 120 AC/50-60 Hz. Includes  Mandrel, coarse 1/2", sanding drum, dressing stone, heavy duty emery cut off wheel, 1/2" 120 grit sanding band, aluminum oxide grinding stone, silicon carbide grinding stone. Pod style nickel cadmium, 1.2 Ah,  recharges in one hour. For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit.
Black & Decker LBXR20 Battery Pack Essex Silver Line 7516D60 Sanding Disc Essex Silver Line 1218THKW Floor Stripping Pad 12 in L x 18 in W
Max extended run time with 1.5Ah battery cells; use with 568.4741. For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit. For high gloss polishing where highest luster is desired. Use with sandscreen.
Essex Silver Line 1218THKB Floor Stripping Pad 12 in L x 18 in W Essex Silver Line 1218THKG Floor Stripping Pad 12 in L x 18 in W RedLithium M12 48-11-2401 Compact Battery Pack
For heavy duty wet stripping of floors. For general duty scrubbing and spot removal on floors. For use with Milwaukee M12 cordless tools. 1.4 Ah.
Dewalt DW9061 High Capacity Replacement Battery Pack Porter-Cable PC18B Battery Pack Hitachi UC18YRL Battery Charger
For use with the entire line of Dewalt 9.6V tools except for Univolt tools; allows users to run multiple tools off of the same battery pack. Slide style battery with up to 500 recharges; 1.5 Ah cells provide extended run time on each charge. Fits: PC418C-2, PC180HDK-2, and PC218C-2. Cooling fan to increase life. 45 minute maximum charge time. For use with all 7.2 to18 volt post style cordless tools.
Dewalt Max DCB120 Compact Battery Pack Dremel 200-1/21 Corded Rotary Tool Kit M18 M12 48-59-1812 Multi-Voltage Battery Charger
For use with 12V Max tools, 40 minute charge time, requires 12V Max compatible charger DCB100 (346.3049). Multipurpose cutting guide attachment, used for multiple applications on a variety of materials. Specs: 15,000 or 35,000 RPM, voltage 120/AC, 50-60/Hz, 6 ft. cord. Includes: 21 genuine Dremel accessories. Charges 12 and 18 volt batteries. This charger accepts all M18 and M12 batteries, so you'll always be prepared and productive, especially on jobs that require a mix of M12 and M18 Milwaukee cordless power tools. This versatile unit charges batteries sequentially, reducing your time to manage charge cycles. The charger communicates directly with the battery pack to monitor cell voltage, temperature and charge status to ensure a full charge. Power up your Milwaukee compact batteries in 30 minutes and extended capacity batteries in 60 minutes, without the need for extra chargers on the jobsite.
Red Lithium 48-11-2420 Compact Battery Pack CHARGER TRAVEL                M12 48-59-2401 Battery Charger
CHARGER TRAVEL
Our Price: $60.72
Provides optimized performance and overload protection using total system communication between tool, battery and charger. Long lasting performance and durability. Fuel gauge onboard displays remaining runtime for less downtime on the job. All weather performance delivers fade-free power in extreme jobsite conditions. 2.0 amp hours of runtime. The M12 Compact Charger and Power Source provides convenient, on-the-go charging for all M12 Batteries both on and off the jobsite. Using the included Jobsite Tough Micro-USB cable and 2.1A Wall Plug, the Compact Charger expands the portability of all M12 products. When not near an outlet, the Compact Charger is compatible with any USB output, including in-vehicle USB ports. Delivering additional functionality, the M12 Compact Charger and Power Source combines with any M12 Battery to provide fast, portable charging for electronic devices. It can also be used to power all models of M12 Heated Gear for increased functionality. M12 Compact Charger and Power Source provides convenient portable charging for batteries and devices. Charges 12 volt compact lithium-ion batteries in thirty minutes, compatible With: M12 Lithium Ion batteries.
Senco VB0156 Battery Charger Essex Silver Line SL8 Velcro Sheet Porter-Cable PCC680L Slide-On Lithium Battery
Battery charger can be used interchangeably with Senco VB0155, VB0161 and VB0118 batteries. Quick charging system reaches 80 percent in just 15-20 minutes. Battery charge indicators display the charge status of your battery. For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit. 1.5 amp/hours for additional runtime on the job. High energy flow cells improves performance of tools. No memory and minimal self discharge so battery is ready when you are.
Makita DC1804 Multi-Voltage Battery Charger Dremel 3000/300-1/24 Corded Rotary Tool Kit V28 M28 48-59-2819 Battery Charger
Universal voltage super high capacity charger; for all 7.2V to  18V batteries, stick and pod styles. Lightweight, comfort grip housing with variable speed, circle cutter/straight edge guide. Specs: voltage 120/AC, 50-60/Hz, 5,000 to 35,000 RPM, 6 ft. cord. Includes: storage case and 24 accessories. LED light displays easy to see charge status, pass-through plug conserves outlet space. Charges Lithium-Ion batteries in one hour or less.
RedLithium M12 48-11-2402 High Capacity Battery Pack Essex Silver Line SL8 Velcro Sheet Painteater 513040 Corded Finish Sander
Red lithium extra capacity XC. For use with Milwaukee M12 cordless tools. Battery fuel gauge displays charge status on tool. For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit. Use on wood, masonite, steel, brick and concrete. Removes paint and smoothes or feathers the edges for a better surface before painting. Lightweight. Gets in tight spaces. Flexible disc system enables disc to conform to uneven surfaces. Rotary action. No tools required to install/remove abrasive disc. Comes with a retractable handle with lock button and hand strap for holding in different positions. Disc size: 4.5" Specs: 120/AC, 60 HZ, 2000 RPM. Uses replacement disc 250.8356.
Dremel 8000-03 Cordless Rotary Tool Kit Essex Silver Line 7516D40 Sanding Disc Dewalt XRP DC9071 Rechargeable Cordless Battery Pack
8 volt Lithium-Ion cordless rotary tool is ideal for hands on projects around the home such as finishing, intricate sanding, polishing, cleaning, engraving and more. Variable speed control allows you to set the speed of the tool to match a particular accessory to the task at hand and is designed to be used with all Dremel accessories and most threaded attachments. Variable speed from 5,000 to 33,000 rpm to match the proper speed required. High capacity battery for longer run time. Comfort grip housing for easier handling and better tool control. Includes: 401 Mandrel, 402 Mandrel, 403 Bristle brush, 407 1/2" Drum sander, 414 Felt polishing wheel (2), 421 Polishing compound, 445 1/2" 240 Grit sanding band (2), 408 1/2" 60 Grit sanding band (3), 432 1/2" 120 Grit sanding band (3), 540 1-1/4" Cut-off wheel (3), 84922 Silicon carbide grinding stone, 932 Aluminum oxide grinding stone, 952 Aluminum oxide grinding stone and wrench. For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit. For use with the entire line of Dewalt 12V tools except for Univolt tools; allows users to run multiple tools off of the same battery pack.
Dewalt DCB101 Battery Charger RedLithium M18 48-11-1815 Rechargeable Compact Battery Pack BATTERY/CHARGER STARTER KIT
Charges all Dewalt 12V/20V Max Li-Ion batteries in 1 hour or less. Diagnostics with LED indicator communicates battery charge status: charged, charging, power line problem, replace pack and battery too hot or too cold. Works with charger 48-59-1801 only, 1.4 Ah. M12 Charger accepts all M12 batteries. Power up your compact batteries in 30 minutes and extended capacity batteries in 60 minutes, without the need for extra charges on the jobsite. M12 Red Lithium 2.0 provides up to 2X more run-time, 20 percentage more power and 2X more recharges than a standard Lithium-Ion battery. Delivers best-in-class performance in extreme job-site conditions. Red Lithium 2.0 battery operates cooler and performs in climates below -18-degree Celsius/0-degree Fahrenheit with fade free power.
FAN JOBSITE W/AC ADPTR 18V    Red Lithium 48-11-1820 Compact Battery Pack RedLithium M12 48-11-2411 Compact Battery Pack
Includes AC adapter. BATTERY NOT INCLUDED.  Circulates air over 40 ft., provides up to 17 hours of runtime on a Redlithium XC5.0 battery, adjustable head and 9 stopping positions, four keyhole hangers and two hanging holes allow for multiple hanging orientations. 20.29"L, 14.07 H, 7.15" W., 5.2 Lbs. 2,350 REMS high, 1,370 RPM low, 284 CFM airflow. Features superior pack construction, electronics and performance to deliver more work per charge and more work over pack life. 2.0 amp-hours runtime. Runs cooler and performs in climates below 0 degrees F/-18 degrees C. All weather performance delivers fade-free power in extreme jobsite conditions. Fuel gauge onboard displays the remaining runtime for less downtime on the job. Its compact, lightweight design fits in tight work spaces and reduces user fatigue. Lithium-Ion battery delivers long life and run time with fade-free power. Battery fuel gauge displays charge status on tool. 1.5 Amp hour - 16 Watt hours battery. Lightweight. For use with Milwaukee M12 cordless tools.
CHARGER 20V                   BATTERY COMPACT LI-ON 20AH 18V Dewalt DC9310 3-Stage Fast Battery Charger
CHARGER 20V
Our Price: $81.95
Charges batteries in 60 minutes or less. Equipped with hot/cold pack delay feature where charger will automatically suspend charging if it detects that the battery is too hot or too cold to ensure optimum battery life. LED notifications for pack charging, charging complete and hot/cold pack delay. Designed to be wall mounted or to sit upright on a table or work surface. Provides up to 50 percent more run time per charge compared to BL1815. Battery reaches full charge in 25 minutes or less. Integrated LED battery charge level indicator allows user to monitor battery charge. Compatible only with Star Protection tools, indicated by the Star Symbol and/or Yellow Battery Receiver under the tool. Three stage charging system, LED indicator communicates battery charge status, charges all Dewalt 7.2V/18V NiCd/NiMH/Li-Ion batteries (except Univolt batteries) in 1 hour or less.
Essex Silver Line 17SC150 Screen-Bak Sanding Disc Dremel 4000-2/30 Corded Rotary Tool Kit Dewalt XRP DC9091 Rechargeable Cordless Battery Pack
For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings. Variable speed for greater versatility. High performance motor for maximum performance at all speeds. Electronic feedback for consistent speed under load. Can be used with all Dremel accessories and attachments. Specs: Cord length 6', speed 5,000 to 35,000 rpm, voltage 120 AC/50-60 Hz, weight 18.8 oz. Includes: Dremel 4000 rotary tool, circle cutter/straight edge guide, sanding/grinding guide, storage case, quick start book. For use with the entire line of Dewalt 14.4 tools.
Red Lithium 48-11-2440 Extended Capacity Battery Pack Screenbak 1218SC150 Sandpaper Essex Silver Line 1218100 Sandpaper
XC 4.0 extended capacity battery pack features superior pack construction, electronics and performance to deliver more work per charge and more work over pack. 4.0 amp-hours of runtime. Runs cooler and performs in climates below 0 degrees F/-18 degrees C. Features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. The temperature management system and individual cell monitoring help maximize battery life. Fuel gauge onboard displays remaining runtime for less downtime on the job. For removing fine scratch marks prior to applying new coatings. For light sanding between surface coatings. Rental. 20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings.
Dewalt Max DCB201 Compact Battery Pack Makita 193157-5 Rechargeable Battery Pack Dewalt DCB203 Compact XR Slide Lithium Battery
Lightweight design. 1.5 Ah. Compatible with the entire line of Dewalt 20V Max tools. 30 minute charge time. Pod style, 2.6 Ah. Compact XR Lithium Ion pack provides 33 percent longer run time. 3-LED fuel gauge system allows immediate feedback on state of charge. No memory and virtually no self-discharge for maximum productivity and less downtime. Lightweight design and quick 35 minute charge time. 2.0 Ah high capacity battery pack.
Dewalt XRP DC9096 High Capacity Battery Pack Senco VB0155 Lithium Battery Makita 193158-3 Rechargeable Battery Pack
For use with the entire line of Dewalt 18 volt tools; allows users to run multiple tools off of the same battery pack. For use with Senco Fusion cordless nailers and DuraSpin 18 volt Li-Ion tools. Reaches 80 percent in approximately 15 minutes. Battery charges even when hot. Quick release for easy battery charging. Pod style, nickel-metal hydride battery, 2.6 Ah, for all Makita 14.4-volt cordless tools.
Makita BL1830 Battery Pack Dewalt DCB103 Combination Fast Battery Charger KIT STARTER W/CHGR&AH BATT 18V
3.0 Ah, Lithium-Ion battery and optimum charging system has built-in shock absorbing features, charges at any time and has sixteen firm holding contact terminals reducing the risk of power loss/fluctuation in high vibration work environments. Dual Port charges batteries in 1 hour or less. Port 1 charges all Dewalt 12V - 20V MAX Li-Ion batteries. Port 2 charges all Dewalt 7.2V - 18V NiCd/NiMH/Li-Ion batteries (except univolt batteries). Diagnostics with LED indicator communicates battery charge status: charged, charging, power line problem, battery too hot or too cold and problem pack or charger. Weighs 3 lbs. Design and build your very own Bosch 18v combo kit or expand your current system with a state-of-the-art Bosch 18v Lithium-Ion battery and charger. The ideal way to kick off your Bosch cordless system. The Bosch 3.0 Ah battery features electronic cell protection which guards against overheating, over mold and deep discharge. Cool pack technology pulls heat away from the battery to increase overall battery life by 100 percent. Compatible with any Bosch 18 volt Lithium-Ion tool, making it extremely convenient across tools. Features a visible battery fuel gauge, so you no longer have to guess when you need to charge the battery. High performance cells that are extremely robust and supply high currents with a minimum energy loss.
Dewalt DC9320 3-Stage Battery Charger RedLithium M18 48-11-1828 High Capacity Slide-On Battery Pack Dewalt Max DCB200 Battery Pack
Dual port, three stage charging system, LED indicator communicates battery charge status. Charges (2) Dewalt 7.2V/18V NiCd/NiMH/Li-Ion batteries (except Univolt batteries) in one hour or less. Red lithium extra capacity XC. Digital power management, overload protection, temperature management system keeps battery in ideal temperature range. Individual cell voltage monitoring ensures optimal charge and discharge for maximum life. Discharge protection prevents cell damage from over-discharge and battery fuel gauge displays remaining run time. Features 3.0 Ah high capacity extended run-time. Compatible with entire line of Dewalt 20V Max tools.
Dewalt DC9319 Shut Off Vehicle Charger CHARGER RAPID 20V/60V FANCOOL Essex Silver Line 7516D20 Sanding Disc
Heavy duty charger is compatible with 7.2V-18V NiCd/NiMH/Li-Ion DeWalt batteries (except 'Univolt'), charge time of 1 hour or less, automatic shut off protects excessive discharge of the vehicle's battery as well. 20 volt max fan cooled fast charger is compatible with 20 volt max batteries and the new 20v/60v max battery. The fan assisted cooling results in faster charge times and reduced downtime in the field. Charges a DCB606 Flex Volt battery in 60 minutes. Internal fan pulls air across the battery to cool and reduce hot/cold pack delays. The charge rate is 8 amps for premium batteries and 4 amps for compact batteries. For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit.
Essex Silver Line 17SC100 Screen-Bak Sanding Disc Makita DC18RC  Battery Chargers Essex Silver Line 121860 Sandpaper
For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings. The Rapid Optimum charger monitors battery and actively controls the current, voltage and temperature for faster charging and longer battery life. 20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings.
Makita 193159-1 Battery Pack Dewalt DCB119 Vehicle Charger ROTARY TOOL VARIBLE SPEED
ROTARY TOOL VARIBLE SPEED
Our Price: $114.60
Pod style, nickel metal-hydride, 2.6 Ah battery for extended battery life in Makita 18-volt tools. Charges all Dewalt 12V - 20V Max Li-Ion batteries from a vehicle's power outlet enabling batteries to be charged while driving to work or on a jobsite. Automatic shut-off protects excessive discharge of vehicle's battery. Diagnostics with LED indicator communicates battery charge status: charged, charging, power line problem, replace pack, and battery too hot or too cold. Allows tool-less and collet-less accessory changes with the inclusion of the three jaw chuck. The chuck accepts all Dremel accessory shank sizes for fast and convenient accessory changes without ever using a wrench. Featuring the all new Pivot Light, your projects are will lit with an optimum line of sight since the light pivots to direct illumination where you want it. Variable speed and electronic feedback circuitry. The slim, ergonomic body design provides a comfortable 360 degree grip zone no matter how you hold it for extended ease of use. The completely redesigned air flow system lets the Dremel 4300 run cool, quiet and smooth so completing projects are more enjoyable than ever. 6' cord. Variable speed: 5,000 - 35,000 rpm.
JOBSITE FAN CORDLESS 20V      Dewalt DCB203-2 Cordless Tool Batteries Dewalt DCB204 Cordless Tool Batteries
JOBSITE FAN CORDLESS 20V
Our Price: $115.60
Operate corded or cordless (extension cord sold separately). Multiple hanging options ? freestanding, hang hooks, tripod mount (sold separately), and wall mount. Wide-range, variable speed control. Provides up to 7 hours of runtime at maximum speed with 4.0 Ah Dewalt 20V Max battery. Specs:  12" L, 17? H, 6.7 Lbs., 500 CFM airflow. Compact XR Lithium Ion pack provides 33 percent longer run time. 3-LED fuel gauge system allows immediate feedback on state of charge. No memory and virtually no self-discharge for maximum productivity and less downtime. Lightweight design and quick 35 minute charge time. 2.0 Ah high capacity battery pack. Premium XR Lithium Ion pack provides up to 33 percent more run time. 3-LED fuel gauge system allows immediate feedback on state of charge. No memory and virtually no self-discharge for maximum productivity and less downtime. Individual pack weighs 1.42 lbs allowing user maximum run time in a lightweight battery. 4.0 Ah high capacity battery pack.
RedLithium M12 48-11-2412 High Capacity Battery Pack Milwaukee 48-59-1806 M18 Battery Chargers RedLithium M18 48-11-1811 Compact Battery Pack
Lithium-Ion battery delivers long life and run time with fade-free power. Battery fuel gauge displays charge status on tool. 1.5 Amp hour - 16 Watt hours battery. Compact and lightweight. For use with Milwaukee M12 cordless tools. Six pack sequential charger offers a compact design, integrated hang holes for vertical mounting and a pass through plug to conserve outlet space. The unit will charge M18 compact batteries in 30 minutes and extended capacity (XC) batteries in 60 minutes. With this six pack charger, users can reduce the amount of time spent charging batteries, increasing productivity on the jobsite. Lithium-Ion battery delivers long life and run time with fade-free power. 1.5 Amp hour - 27 Watt hour battery. Battery fuel gauge displays remaining run time. Overload protection prevents user from damaging their cordless power tool investment in abusive situations. Temperature management systems keeps battery in ideal temperature range to provide maximum life. Individual cell monitoring ensures optimal charge and discharge for long life. Discharge protection prevents cell damage from over-discharge. Integrated weld frame. Impact and vibration protective rubber. For use with M18 cordless tools.
Makita BL1840 Lithium Battery Milwaukee 2460-21 M12 Cordless Rotary Tool Kits Essex Silver Line 17SC80 Screen-Bak Sanding Disc
Engineered for more run time and faster charging. Reaches a full charge in only 40 minutes. Lithium Ion 4.0 Ah battery. Fully compatible with 18 volt LXT and 18 volt Compact cordless tools that carry the star symbol. Compact and lightweight. Tool runs from 5,000-32,000 RPM. Managed by a variable speed dial for fluid control. 1/8" Collet is compatible with all 1/32" - 1/8" shank accessories providing the user access to any cutting, grinding, sanding and polishing solutions. Includes rotary tool, M12 Redlithium battery, 5 cutting wheels and mandrel, wrench and 30-minute charger and carrying case. For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings.
BATTERY CMPT/CHGR START PK 18V Red Lithium 48-11-1840 Extended Capacity Battery Pack BATTERY LITHIUM 5.0AH 18V
Provides up to 50 percent more run time per charge compared to BL1815. Battery reaches full charge in 25 minutes or less. Integrated LED battery charge level indicator allows user to monitor battery charge. Compatible only with Star Protection tools, indicated by the Star Symbol and/or Yellow Battery Receiver under the tool. Includes: (1) 18V LXT Lithium-Ion Compact battery and (1) rapid charger. XC 4.0 extended capacity battery pack features superior pack construction, electronics and performance to deliver more work per charge and more work over pack life. 4.0 amp-hours of runtime. Runs cooler and performs in climates below 0 degrees F/-18 degrees C. All weather performance delivers fade-free power in extreme jobsite conditions. Features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. The temperature management system and individual cell monitoring help maximize battery life. Fuel gauge onboard displays remaining runtime for less downtime on the job. The XC5.0 extended capacity battery provides optimized performance and overload protection using total system communication between tool, battery and charger. Durable and long lasting performance. Fuel gauge onboard displays remaining runtime for less downtime on the job. Advanced design to protect the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack. Extends life and prevents pack failures from vibration or drops. This unique design also allows the battery to operate in extreme cold weather conditions. REDLINK intelligence features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. Includes: (1) M18 RedLithium XC5.0  extended capacity battery pack.
BATTERY 20V 4AH               Screenbak 1218SC80 Sandpaper Black & Decker BDCD220IA-1 Cordless Drill Kit
BATTERY 20V 4AH
Our Price: $131.23
LED fuel gauge displays charge remaining. Charges in 60 minutes or less using Bostitch 20V MAX charger. For removing fine scratch marks prior to applying new coatings. For light sanding between surface coatings. Rental. Drill/driver features 310 in-lbs of torque, two speed gear box for increased versatility, LED work light, 11 position clutch is lightweight for easier use. Impact driver features high performance transmission (torque 1375). Compact and lightweight for ease of use and Quick Release 1/4" hex chuck. Includes (1) LDX220 drill/driver, (1) BDC1202 Impact driver, (1) 20 volt max battery, (1) charger, (2) screwdriver bits and (1) soft bag.
BATTERY 50AH LITHIUM-ION 18V  DRILL/DRVR KIT CMB LT-ION 20V ADAPTER 18-20V 2A BATT W/CHARG
Engineered for more run time and faster charging. Lithium Ion 5.0 Ah battery reaches full charge in only 45 minutes. Fully compatible with 18 volt LXT and 18 volt Compact cordless tools that carry the star symbol. Compact, lightweight and powerful. Powered by lithium-ion; more power and double the run time of ni-cad. Batteries hold a charge for up to 18 months in storage. Includes drill, impact driver, (2) 20 volt batteries, charger, storage bag and (1) #2 Phillips bit. DRILL/DRIVER; high performance motor produces up to 350 in-lbs of torque. Variable speed trigger switch. 3/8" (10mm) single sleeve keyless chuck. 22 torque/clutch settings. Two variable speed ranges for versatility (0-350/0-1300 RPM). Built in LED work light. On-board battery power indicator. Electric brake. IMPACT DRIVER; 1/4" hex quick change locking collet. Variable speed switch (0-2200 rpm). Rubberized non-slip pistol grip. Cast aluminum gear housing. Incredible 1062 in-lbs of torque. Built-in LED work light. On-board battery power indicator. Electric brake. Allows for us of 20 volt Max batteries in most DeWalt 18 volt tools. Adapter requires the use of 20 volt Max chargers. Adapter will not fit in DeWalt 18 volt chargers. Includes: (1) 18 volt-20 volt Max Adapter, (2) DCB203 Max XR Lithium Ion batteries (2.0Ah) and (1) 12v/20v Max Charger.
CHARGER 2-PORT LITHIUM-ION 18V Dewalt Max DCB200-2 Battery Pack QEP 21660 Power Mixer With Paddle
The 18V Dual Port Rapid Optimum Charger has an exclusive built-in fan that cools the battery during the charging process for faster charging. The charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. Charges (2) 18V Compact Lithium-Ion 2.0Ah batteries in only 25 minutes; (2) 18V LXT Lithium-Ion 3.0Ah batteries in only 30 minutes; (2) 18V LXT Lithium-Ion 4.0Ah batteries in only 40 minutes; (2) 18V LXT Lithium-Ion 5.0Ah batteries in only 45 minutes; (2) 18V LXT Lithium-Ion 6.0Ah batteries in only 55 minutes. Features 3.0 Ah high capacity extended run-time. Compatible with entire line of Dewalt 20V Max tools. Lightweight and impact resistant, variable speed dial controls RPM's, ergonomic handle grip, mix viscous materials with minimal effort. Specs: Motor: 110V/1300 Watts, 2-speed (1st gear) 180-460 RPM, (2nd gear) 300 -700 RPM, Weighs 13 lbs. Includes: (1) male threaded paddle specially designed to completely mix full bucket loads of viscous materials and a chuck kit for use with non-threaded mixer paddles.
Dewalt XRP DC9096-2 Rechargeable Cordless Battery Pack Dremel 4000-6/50 Corded Rotary Tool Kit Makita BL1830-2 Battery Pack
Powers entire Dewalt line of 18V tools; run multiple tools off of the same battery pack. Includes: (2) 18V XRP batteries. Variable speed rotary tool with a slim, ergonomic body provides a 360-degree grip zone for comfort and control in any grip position. Tool can use all existing Dremel accessories and attachments plus high-performance attachments to complete the widest range of projects. Specs: Amperage 1.6 amps, Cord Length 6 ft., Speed 5,000 to 35,000 RPM, Voltage 120 AC, 50-60 Hz,Weight (lbs.) 18.8 oz. Includes: 50 assorted accessories 3.0 Ah, Lithium-Ion battery and optimum charging system has built-in shock absorbing features, charges at any time and has sixteen firm holding contact terminals reducing the risk of power loss/fluctuation in high vibration work environments.
DRILL/DRIVER 12V KIT LITH-ION BATTERY 20/60V MAX FLEXVOLT   RedLithium M18 48-11-1822 High Capacity Battery Pack
3/8" driver-drill with 2 speeds (0-450 and 0-1,700 rpm) delivers up to 210 in. lbs of max torque. Features a compact design at only 7-716" long and weighs only 2.8 lbs with battery for reduced operator fatigue. Impact Driver with variable speed (0-2,600 rpm and 0-2,400 ipm) delivers up to 970 in. lbs of max torque. Features a compact design at only 6-1/8" long and weighs only 2.2 lbs with battery for reduced operator fatigue. Ergonomically designed handles with rubberized soft grips provide increased comfort. 12 volt slide battery design enables tool to stand for convenience. 12 volt compact Lithium -Ion 2.0 Ah battery BL1021B features in integrated L.E.D. battery charge level indicator. Built-in L.E.D. light illuminated the work area. Part of the expanding 12 volt CXT series, combining performance with superior ergonomics in a compact size. Not compatible with 12 volt max pod-style tools, batteries and chargers. The 2 piece combo kit includes: (1) 12 volt max CXT Impact Driver (Tool Only) (DT03Z), (1) 12 volt max CXT 3/8" Driver-Drill (Tool Only) (FD05Z), (1) 12 volt max CXT Lithium-Ion charger (DC10WD), (2) 12 volt max CXT Lithium-Ion 2.0 Ah batteries (BL1021B) and (1) tool case. Features the power of corded with the freedom of cordless. The 20v/60v Max battery pack changes voltage when you change tools, powering a line of powerful 60V Max tools, 120V Max tools and backwards compatible to existing 20V Max tools and chargers. The battery pack is smart enough to know when to provide runtime for 20V Max tools (6.0Ah) and power in the new 60V max and 120V Max tools. LED state of charge display. Durable construction with a single piece cell holder. Lithium-Ion battery deliver long life and run-time with fade-fee power. 1.5 Amp hour - 16 Watt hours battery. Battery fuel gauge displays remaining run-time. Overload protection prevents user from damaging their cordless power tool investment in abusive situations. Temperature management system keeps battery in ideal temperature range for maximum life. Discharge protection prevents cell damage from over discharge. Integrated weld frame. Impact and vibration protective rubber.
Porter-Cable PCCK604L2  Cordless Impact Drill/Driver Kits Dewalt DCT414S1 Infrared Thermometer Kit BATTERY CHRG START PK 50AH 18V
20 volt cordless Lithium-Ion 1/2" drill driver. Two speed gear box between 0-350 and 0-1,500 rpm. Compact and lightweight design. Keyless 1/2" metal ratcheting chuck. Powerful 1,450 in-lbs of torque providing 3,100 BPM. 0-2,800 RPM variable speed to match speed to the application. One handed 1/4" hex chuck for bit changes on the fly. Includes 20 volt cordless Lithium-Ion 1/2" drill driver, 20 volt cordless Lithium-Ion 1/4" Impact driver, (2) 1.3 Ah Li-Ion batteries, Li-Ion standard charger, double ended screwdriver bit, no. 2 Phillips bit tip and kit bag. Features a LED hot (red) and cold (blue) spot indicator to quickly locate temperature changes, provides audio alarms to alert contractors in noisy work conditions. The IR thermometer measures temperatures from negative 20 degrees Fahrenheit to 932 degrees Fahrenheit, records maximum/minimum and average temperatures and features a bright green backlit display for easy-to-read recordings, has adjustable emissivity, offers accuracy across a wide range of materials. Includes: infrared thermometer, (1) 12V max Lithium-Ion battery, (1) 40 minute charger (1) kit box. Lithium Ion 5.0 Ah battery reaches a full charge in only 45 minutes or less. Integrated LED battery charge level indicator allows user to monitor battery charge. Includes: (1) 18V Li-Ion battery and (1) rapid charger.
Hitachi KC10DFL2  Cordless Impact Drill/Driver Kits Milwaukee M28 48-11-2830 Battery Pack Essex Silver Line 121836 Sandpaper
Compact stature makes these tools ideal for hard to reach jobs. Lithium-Ion charger recharges the batteries. 12 volt drill driver with a 3/8" keyless chuck and 21 clutch plus 1 clutch with 21 torque settings and a drill mode for ultimate precision and control. 12 volt impact driver with 955 in/lbs of torque, up to 2,700 rpm, ideal for driving stubborn bolts and screws. Kit includes: (2) 12 volt Peak Lithium-Ion batteries that deliver steady power for the duration of every charge, (1) 12 volt Peak Lithium-Ion Driver drill, (1) 12 volt Peak Lithium-Ion Impact driver, (1) flashlight, (1) 40 minute quick charger and (1) lightweight padded nylon carrying bag. Lithium-Ion battery packs power the entire Milwaukee M28 and V28 cordless power tools. LED indicators display remaining charge left. 20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings.
BATTERY CDLSS STARTER KIT M18 DRILL/IMPACT DRIVER COMBO 20V Milwaukee 2471-21 M12 Series Cordless Tube Cutters
The M18 Redlithium XC5.0 extended capacity battery pack features ideal pack construction and performance to deliver more work per charge and more work over the life of the pack. Advanced design offers protection to the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack. Extends run-time and life by minimizing heat and prevents pack failures from vibration or drops. The design allows the battery to operate in extreme cold weather conditions. Overload protection prevents you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. Includes: (1) M18 REDLITHIUM XC5.0 extended capacity battery pack and (1) M18 and M12 multi-voltage charger. Power and versatility to tackle projects throughout the home and workshop. Compact and lightweight to improve comfort, control and access to tight spaces. Lithium Ion batteries for maximum run time and stay charged up to 18 months. Worx 20 volt lithium batteries fit a wide range of Worx cordless lawn and workshop tools. Includes 20 volt cordless drill/driver and impact drivers, (2) 1.5 Ah Lithium Ion batteries, a 1 hour charger, belt hook and carry bag. Close quarter rotating cutting head cuts pipe in confined spaces, automatic adjustment from 3/8"-1" tubing, auto locking mechanism delivers up to 200 cuts per charge, water resistant sealed metal cutter head, battery fuel gauge displays remaining run-time, built-in LED light illuminates line of cut. Specs: 12V, 500 RPM, trigger set:  cut/reset to open, copper cutting wheel, capacity 1/2" to 1-1/8" O.D., 14" long, weighs 3.2 lbs. Includes: (1) 12V Red Lithium battery, (1) 30 minute charger, (1) carrying case.
DRILL/DRIVER 18V KIT LITH-ION Milwaukee 2494-22 Kit Milwaukee 2441-21 M12 Caulk and Adhesive Gun Kit
1/2" driver-drill with 2 speeds (0-600 and 0-1,900 rpm) delivers up to 480 in. lbs of max torque. Features a compact design at only 7-1/4" long and weighs only 3.3 lbs with battery for reduced operator fatigue. Impact driver with variable speed (0-2,900 rpm and 0-3.500 ipm) delivers up to 1,460 in. lbs of max torque. Features a compact design at only 5-3/8" long and weighs only 2.8 lbs with battery for reduced operator fatigue. Ergonomically designed handles with rubberized soft grips provide increased comfort. Built-in L.E.D. light illuminates the work area. 18 volt compact Lithium-Ion battery BL1820B provides more run time per charge and features an integrated L.E.D. battery charge level indicator. The 2.0 Ah battery reaches full charge in 25 minutes or less and is compatible with 18 volt LXT tools. Equipped with Star Protection computer controls to protect against overloading, over-discharging and over-heating. Rapid optimum charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. The charger has a built-in fan to cool the battery which helps produce more lifetime work. Compatible with Makita 18 volt Lithium Ion batteries with a Star symbol. Combo kit includes: (1) 18 volt LXT Cordless 1/2" Driver-Drill (Tool Only) (XFD10Z), (1) 18 volt Compact Impact driver (Tool Only) (XDT11Z), (1) 18 volt Lithium-Ion Rapid Optimum charger (DC18RC), (2) 18 volt Compact Lithium-Ion 2.0 Ah batteries (BL1820B) and (1) tool bag (831274-0). Drill driver delivers 275 in-lbs of peak torque, 3/8", 0-400/0-1,500 RPM. Impact driver delivers 850 in-lbs of torque, 1/4" hex, and 0-2,000 RPM for fast driving. Kit also includes two M12 Redlithium batteries, 30-minute charger and contractor bag. Light, compact cordless powered caulk gun. With up to 400 lbs. of pushing force it easily dispenses everyday construction sealants and adhesives. The combination variable speed trigger and max speed dial allow for total application speed control. The 360 degree rotating collar delivers maximum control around turns. The tool also features auto reversing anti-drip, a seal puncture tool and durable hang hook for versatility on the job. Powered by the M12 Redlithium battery, the M12 will dispense up to 150 10 oz. tubes of building sealant on one charge. 30 minutes charge time. Weighs only 4.11 lbs. Kit comes with a battery and charger.
CHARGER 4-PORT LITHIUM-ION 18V BATTERY 20VOLT MAX 5AH 2-PACK Dewalt DCB204-2 Cordless Tool Batteries
18V Lithium-Ion 4-Port Charger (model DC18SF) compact size is ideal for job site or shop use, and will accommodate up to (4) 18V Lithium-Ion batteries at one time for increased efficiency and less downtime Charger indicators provide updates on charging progress or charging status. It also monitors each battery and actively controls the current, voltage and temperature for faster charging and longer battery life. Charges (2) 18V LXT 3.0 Ah batteries in 60 minutes, (4) 18V LXT 3.0 Ah batteries in 120 minutes, (2) 18V LXT compact 2.0Ah batteries in 30 minutes and (4) 18V LXT compact 2.0Ah batteries in 60 minutes. The 20 volt max 5.0 Ah Lithium Ion battery pack provides immediate feedback on state of charge with the 3-LED fuel gauge system and has a lightweight 1.4 lb design for easy transporting. No memory and virtually no self-discharge for maximum productivity and less downtime. Premium XR Lithium Ion pack provides up to 33 percent more run time. 3-LED fuel gauge system allows immediate feedback on state of charge. No memory and virtually no self-discharge for maximum productivity and less downtime. Individual pack weighs 1.42 lbs allowing user maximum run time in a lightweight battery. 4.0 Ah high capacity battery pack.
Dewalt DCK211S2 Kit Milwaukee 2457-21 Cordless Ratchet Kit TOOL COMBO KIT 4PC 20V
TOOL COMBO KIT 4PC 20V
Our Price: $186.81
Drill/driver features a two-speed transmission that delivers 0-400/0-1,500 RPM, 3/8" keyless chuck, impact driver delivers 950 in/lb of torque and 1/4" hex chuck, three LED lights that provide visibility without shadows in dark work areas, a battery that has been placed at the bottom of the handle that allows the tool to stand up between uses. Includes: 2 tools, (2) 12V max Lithium-Ion battery packs, (1) bit tip, (2) belt hooks, (1) 40 minute charger, (1) contractor bag. Features compact low-profile head design: 3/4" head for tight spaces. Specs: 12 V, 35 ft-lbs torque, 250 RPM speed, 3/8" ball detent anvil, variable speed, metal trigger, on board fuel gauge, LED light, Red Lithium battery, 30 minute charge time and 19 lbs weight. Includes M12 Red Lithium battery, 3/8" to 1/4" adapter, 30-minute charger and carrying case. 3/8? Drill/Driver features 0-620 max RPM, 115 in-lbs torque and 11 clutch positions; Mouse Sander with 12,000 OPM and 3-position grip control; Circular saw with 5-1/2? cutting capacity and bevel adjustments of 45 and 90 degrees; LED Work light with luminous intensity of 70 and up to 11 hours runtime. Includes: Drill/Driver, Circular Saw, MOUSE Detail Sander, LED Work light, battery, charger, Double Ended Driver Bit, and (3) Sand Paper Sheets.
BATTERY 20/60V MAX 9.0/3.0AH  BATTERY 20/60V FLEXVOLT 2PK K BATTERY M18 9.0 AMP LITHIUM
BATTERY 20V/60V MAX 9.0AH
Our Price: $188.60
180 watt hours for energy in each battery pack for longer run time. 9.0 Ah capacity when used in a 20 volt Max tool. Compatible with all 20 volt Max chargers. The power of corded with the freedom of cordless. 20v/60v Max battery pack changes voltage when you change tools, powering a line of 60v Max tools, 120V Max tools and backwards compatible to existing 20v Max tools and chargers. The battery pack is smart enough to know when to provide runtime for 20V Max tools (6.0Ah) and power in the new 60V Max and 120V Max tools. LED state of charge display. Tri-Platform compatibility 20V Max, 60V Max and 120V Max. Durable construction with a single piece cell holder. The M18 RedLithium High Demand 9.0 battery pack delivers more run time, more power and runs 60 percent cooler than standard 18V Lithium-Ion batteries. RedLink intelligence provides optimized performance and overload protection using total system communications between tool, battery and charger. Fuel gauge onboard displays remaining run time for less downtime on the job. All weather performance delivers fade free power in extreme job site conditions. Versatility to power more than 100 Milwaukee M18 cordless power tools.
Makita BL1840-2 Lithium Battery M12 2446-21XC Cordless Grease Gun Kit DRILL/DRIVER 2TOOL COMBO KIT
Engineered for more run time and faster charging. Reaches a full charge in only 40 minutes. Lithium Ion 4.0 Ah battery. Fully compatible with 18 volt LXT and 18 volt Compact cordless tools that carry the star symbol. Delivers over 8,000 PSI maximum operating pressure for heavy duty applications and dispenses up to seven grease cartridges per battery charge. Also features a lightweight, ergonomic handle design for greater user comfort during prolonged use and an on board hose storage and shoulder strap loop for added convenience with less mess. Air bleeder valve priming mechanism for quick flow. High pressure flex hose with spring guard. Three way loading, bulk, cartridge, and suction. 14" long and 7.2 pounds. Kit includes 2446-20 grease gun, (1) M12 Lithium-Ion XC battery pack 48-11-2402, 30-minute charger, 36" flex hose with spring guard, grease coupler and carrying case. Drill brushless motor provides extended runtime. Drill brushless motor provides 360 MWO for heavy and fast applications. Drill high performance 2-speed transmission with rpm's of 0-430 and 0-1700 for speed of fastening. Drill compact size of 8" for work in tight areas. Drill lightweight of 3.2 lbs is 14 percent lighter than brushed PCC601. Impact Driver brushless motor provides 50 percent more runtime. Impact Driver provides 1400 in-lbs torque for driving large fasteners. Impact Driver max rpm's of 2700 for speed of fastening. Impact Driver compact (5.8") and lightweight design (2.9 lbs) for ease of use. (2) Pro grade lithium ion batteries for maximum performance included.
M12 2470-21 Cordless Shear Kit Milwaukee 2691-22 Compact Kit BATTERY M18 9AMP STARTER KIT
Variable speed trigger with reverse, cuts up to 2" schedule 40 PVC in 3 seconds, ultra sharp blade with pierce point, offset blade, quick return blade, all metal planetary drive delivers over 200 cuts per charge, stainless steel blade and aluminum jaw, impact, water and rust resistant, on board fuel gauge displays remaining run-time. Specs: 12V, 1,900 in/lbs torque, cut capacity:  2" PVC (2-3/8" O.D.), 3mm reinforced stainless steel blade, on board storage, 14-3/8" long, weighs 4.7 lbs. Includes: (1) M12 Red Lithium battery, (1) 30-minute charger, (1) carrying case. Compact 1/2" drill/driver with 425 in-lbs of torque, weighs 4 lbs., 1/4" hex impact driver with 4-pole frameless motor with 1400 In/lbs. of torque. Includes: 2 tools, (2) 18V Red Lithium compact battery packs, (1) 18V charger, (1) carrying case. RedLink Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. Fuel gauge onboard displays remaining runtime for less downtime on the job. All-weather performance delivers fade free power in extreme jobsite conditions. Versatile to power more than 100 Milwaukee M18 cordless power tools. Weighs 3.4 lbs. The Starter Kit includes: (1) M18 RedLithium High Demand 9.0 battery pack and (1) M18 and M12 Rapid Charger.
M-Spector M12 2313-21 Cordless Inspection Camera Kit BATTERY 50AH LITHIUM-ION 18V  Essex Silver Line 121820 Sandpaper
Features: screen rotates providing user fluid image control; Optimized 2.7" high resolution color LCD; 9mm 640x480 pixel digital image sensor; 4 LED lights, 5 settings; 3' cable length, 320 x 240 display resolution aluminum head and improved flexibility deliver unmatched durability and pipe maneuverability. Includes M12 Red Lithium battery, 30 minute charger, hook, magnet and mirror attachments and carrying case. Engineered for more run time and faster charging. Lithium Ion 5.0 Ah battery reaches full charge in only 45 minutes. Fully compatible with 18 volt LXT and 18 volt Compact cordless tools that carry the star symbol. 20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings.
DRILL DRIVER KT BRSHLS 2PC 18V Dewalt DCK280C2 Kit Porter-Cable PCCK615L4  Cordless Kits
Brushless motor optimizes battery energy use for up to 50% longer run time. Variable speed (0-1,300/0-3,000 RPM and 0-1,600/0-3,900 IPM) for a wide range of fastening applications. Includes: XFD11ZB, XDT15ZB, (2) 18V Compact LXT Lithium-Ion battery, Rapid Optimum charger, and toolbag. Two speed transmission drill/driver features 20V Max, 1/2" ratcheting chuck, 0-600/0-2,000 no load speed, and 15 clutch settings. Impact driver features 3 LED lights with 20 second delay to provide visibility without shadows, 1/4" hex chuck, 2800 rpm no load speed, 3200 ipm, and 1400 in-lbs max torque. Includes: 2 tools, 20V Max lithium ion 1.5 Ah battery packs, fast charger, (2) belt hooks, bit holder and contractor bag. The kit includes the following: (1) PCC601 1/2" drill driver, (1) PCC641 1/4" impact driver, (1) PCC670 reciprocating tiger saw, (1) PCC700 LED flashlight, (2) PCC680L 20 volt Lithium-Ion batteries, (1) PCC691L charger and (1) kit bag.
GREASE GUN KIT CORDLESS 20V   BATTERY PACK HI-OUTPUT HD 12.0 DRILL/IMPACT CMPT BRSHLESS 20V
Powerful motor delivers 10,000 max psi to power through clogged grease fittings. High volume pump pushes up to 5.0 oz/min high flow applications. Up to 16 cartridges per charge with a single Dewalt 20 volt max battery (4.0 Ah). Variable speed trigger offers precise control of the grease flow. 42" extra long and flexible hose designed for reaching hard to access grease fittings. Bright LED light assists in locating hard to see grease fittings in low light situations. Innovative pump filter screen prevents dirt and contamination from clogging the pump mechanism. Integrated no-mar foot design allows operators to rest the tool on flat surfaces. Air-bleeder valve assists in pump priming after cartridge changes. Cartridge capacity 14.5 oz. Tool weight 9.5 lbs.  Kit includes: Premium Li-Ion battery (4.0 Ah), a fast charger, shoulder strap and kit box. The M18 Red Lithium high output HD12.0 battery pack provides 50 percent more power and runs 50 percent cooler vs M18 Red Lithium HD battery packs. The massive increase in power elevates the performance of the entire M18 system and drives the next breakthrough in M18 FUEL, delivering the power of 15A corded product. It delivers fade free power and runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before. The M18 Red Lithium high output HD12.0 provides increased power in extreme cold weather conditions (below 0F/-18C). It is fully compatible with 150+ M18 solutions. Dewalt brushless motor delivers up to 57 percent more run time over brushed. Compact (7.52" front to back), lightweight Drill/Driver design fits into tight areas. LED light with 20 second trigger delay provides increased visibility in dark or confined spaces. Compact (5.4" front to back), lightweight (2.0 lbs) Impact Driver design fits into tight areas. Ergonomic comfort grip handle provides ideal balance and tool control. Impact driver's one-handed loading 1/4" hex chuck accepts 1" bit tips. Includes: (1) 20 v compact brushless Drill/Driver, (1) 20 v compact brushless 1/4" Impact Driver, (2) 20 v Max Li-Ion battery packs, (1) charger and (1) kit bag.
Milwaukee 2498-24 Kit Makita LXT211 Cordless Kit Essex Silver Line SL8 Velcro Sheet
Screwdriver delivers 175 in-lbs of torque, 15 position clutch and 0-500 RPM. Impact delivers best-in-class 850 in-lbs of torque, 1/4 hex and 0-2000 RPM. Hackzall reciprocating saw delivers 0-3000 SPM, and 11" for quick cutting in tight spaces. Work light features a 90-degree rotating head and an integrated magnet for hands-free. Kit also includes two 12V Redlithium battery packs. 30 minute charger, two Hackzall blades and contractor bag. Two speed 1/2" hammer driver/rill (0-400/0-1,500 RPM) with 4-pole motor delivers 450 in/lbs. of max torque and weighs only 4.2 lbs., variable speed impact driver (0-2,300 RPM) provides 1,330 in/lbs. of max torque and weighs only 3.4 lbs. Includes: 2 tools, (2) 18V LXT Lithium-Ion batteries, (1) 30 minute rapid optimum charger, (1) tool case. For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit.
BATTERY 20/60V MAX 9/3AH 2PK  Milwaukee M18 Cordless Grease Gun Kit COMBO KIT 40AH 2PC 18V
COMBO KIT 40AH 2PC 18V
Our Price: $277.58
180 watt hours for energy in each battery pack for longer run time. 9.0 Ah capacity when used in a 20 volt Max tool. Compatible with all 20 volt Max chargers. 18 volt, 2 speed grease gun kit delivers10,000 psi max operating pressure. Max flow rate of up to 10 oz./minute. Pre-set grease counter dial. 48" flexible hose offers greater access to difficult to reach fittings. Air bleeder valve for quick priming. Lock-on/Lock-off trigger dellivers added user convenience. 30 minutes charge time. Kit includes battery and charger. The 18V LXT Lithium-Ion Cordless 2-Piece Combo Kit packs two compact cordless tools with efficient brushless motors for a full range of drilling, driving, and fastening applications. 1/2" Hammer Driver-Drill features all-metal gear construction for applications in wood, metal and masonry. Delivers (0-500 & 0-2,000 RPM), (0-7,500 & 0-30,000 BPM) and 530 in.lbs. of max torque for drilling, driving and hammer. Impact Driver delivers 0-3,400 RPM, 0-3,600 IPM and 1,500 in.lbs. max torque. Both tools are equipped with an efficient and compact brushless motor that is engineered for longer run time, increased power and speed, and longer tool life. The 18V LXT 4.0Ah battery has a category-leading charge time of only 40 minutes for less downtime and increased productivity, and includes an on-board LED charge level indicator for increased convenience. Includes (1) 18V Compact Brushless 1/2? Hammer Deriver-Drill (XPH12Z), (1) Brushless Impact Driver (XDT13Z), (2) 18V Lithium-Ion 4.0Ah batteries (BL1840B), (1) 18V charger (DC18RC) and tool case.
Essex Silver Line SL8 Velcro Sheet Dewalt DCK285C2 Kit Dewalt DCK413S2 Kit
For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit. Hammerdrill features two speed transmission, 0-600/0-2000 max rpm, 34000 max bpm, 15 clutch settings, 1/2" ratcheting chuck and 350UWO. Impact driver features 3 LED lights with 20 second delay to provide visibility without shadows, 1/4" hex chuck, 2800rpm no load speed, 3200ipm, and 1400in-lbs max torque. Includes: 2 tools, (20) 20V Max lithium ion 1.5 Ah battery packs, fast charger, (2) belt hooks, on-board bit holder and a handy zippered bag. Drill/driver delivers 189UWO max power, 2 speed settings, 1,500 max rpm, 15 clutch settings, 3/8" one sleeve chuck, 0-400/0-1,500 rpm no load speed and weighs 2.4 lbs. Pivot reciprocating saw with keyless blade clamp, 0-2,700 spm, 9/16" stroke length, electric brake, adjustable 3-position handle, LED light, and weighs 3.1 lbs. 1/4" Impact driver delivers 950in-lbs/79ft-lbs of max torque, 0-2,450rpm no load speed, 0-3,400ipm, 3 LED lights, belt hook, one-handed loading and weighs 2.3 lbs. LED worklight provides 4 hour run time, 130 lumens output, kick stand, pivoting head rotates 360-degrees and weighs .5 lbs. Includes two 12 Max Li-Ion batteries, fast charger, bit tip, two belt hooks, 4" 6 tpi wood cutting recip blade, 4" 18 tpi metal cutting recip blade and kit bag.
DRAIN SNAKE TOOL ONLY 20V     STARTER KIT HI-OUTPUT HD 12.0 Dewalt DCT410S1 Cordless Inspection Cameras
DRAIN SNAKE TOOL ONLY 20V
Our Price: $290.47
Clear drains with less setup. Removable drum accepts up to 3/8" x 35' cable for use in up to 3" pipes. Pivoting LED light with 3 brightness modes help provide illumination. Ergonomic handle for comfortable grip. Fixed outer shroud helps protect surfaces from rotating drum. Sliding nose cone allows for quick locking/releasing of cable. Variable speed trigger with drill-style inline forward/reverse. Includes Drain Snake and 5/16" x 25' Black Oxide Drain Cable with Bulb Head. The M18 Red Lithium High Output HD12.0 Battery Pack provides 50 percent more power and runs 50 percent cooler vs M18 Red Lithium HD9.0 battery packs. It delivers fade free power and runs substantially cooler through heavy applications. Includes M18 Red Lithium High Output HD12.0 Battery Pack (48-11-1812) and M18/M12 Rapid Charger (48-59-1808). Camera features a wireless 3.5-inch LCD screen that is removable to provide visibility in tight areas, a waterproof, 3' cable and the ability to instantly capture videos and photos, offers increased visibility with a 3x zoom capability. Includes:  (1) 12V Max battery, hook and magnet tools to aid in retrieval of objects.
Makita JN1601  Nibbler Milwaukee 2697-22 Cordless Kit DeWalt DCK281D2 Cordless Drill Kit
Clean and precise work in keystone plate, deck plate and other corrugated sheet materials. Die rotates 360 degrees. Large 1/4" stroke. Ergonomic, slim body design for easy gripping. Extremely light (weighs only 3.6 lbs) for easy handling. Lock-on sliding switch for continuous operation. Built-in thickness gauge for convenience. Easy punch and die replacement for reduced down time. Double insulated. 2,200 strokes per minute. Minimum cutting radius for outside edge 2" outside edge; Inside edge 1-3/4". Overall length 10-1/4". Included wrench and hex wrench. Hammer drill/driver with 4-pole frameless motor delivers 525 in-lbs of peak torque, 0-550/0-1,700 rpm, 29,000 bpm, all metal 1/2" single sleeve ratcheting chuck and weighs 3.5 lbs. Compact impact driver with 4-pole frameless motor delivers 1,400 in-lbs of torque, 0-2,200 rpm, 0-3,200 ipm, 1/4" hex quick change chuck and weighs 2.6 lbs. Includes two M18 XC high capacity Red Lithium batteries, 1-hour charger and contractor bag. Brushless motor delivers more run time. XR Li-Ion batteries with fuel gauge provides more capacity. DCD790 20V Max 1/2" drill/driver compact (7.2" front to back), lightweight (3.5 lb) design fits into tight areas. DCF886 20V Max 1/4" impact driver compact (5.6" front to back) design fits into tight areas. Both tools feature LED lights with 20 second trigger release delay providing increased visibility in dark or confined spaces.
Dewalt DCK290L2 Kit DeWalt DCK286D2 Cordless Drill Kit Milwaukee M12 Cordless Cable Cutter
Hammerdrill features 3-speed all-metal transmission, 0-575/0-1,350/0-2,000 max rpm, 0-9,775/0-22,950/0-34,000 max bpm, 22 clutch settings, 1/2" all metal ratcheting chuck delivers 535UWO. Impact driver features 3 LED lights with 20 second delay to provide visibility without shadows, 1/4" hex chuck, 2800rpm no load speed, 3200ipm, and 1400in-lbs max torque. Includes: 2 tools, (2) 20V Max lithium ion 3.0 Ah battery packs, fast charger, belt hooks, 360-degree side handle and contractor bag. DeWalt brushless motor delivers up to 57 percent run t