Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > CORDLESS MULTI-TOOL KITS
Sort By:
1
Black & Decker GCO12SFB Cordless Drill Black & Decker GCO18SFB Cordless Drill Black & Decker BDCD220IA-1 Cordless Drill Kit
Drill has variable speed reverse for drilling and driving control, keyless chuck makes bit changing quick and simple, 24 position clutch prevents screws from stripping, 0-750 RPM, soft grips for comfort, slide pack battery provides easy installation and removal of the battery. Stud sensor detects studs through walls up to 3/4" thick. Includes cordless drill with stud sensor, (1) battery pack, (1) DC plug charger and storage bag. Drill has variable speed reverse for drilling and driving control, keyless chuck makes bit changing quick and simple, 24 position clutch prevents screws from stripping, 0-750 RPM, soft grips for comfort, slide pack battery provides easy installation and removal of the battery. Stud sensor detects studs through walls up to 3/4" thick. Includes cordless drill with stud sensor, (1) battery pack, (1) DC plug charger and storage bag. Drill/driver features 310 in-lbs of torque, two speed gear box for increased versatility, LED work light, 11 position clutch is lightweight for easier use. Impact driver features high performance transmission (torque 1375). Compact and lightweight for ease of use and Quick Release 1/4" hex chuck. Includes (1) LDX220 drill/driver, (1) BDC1202 Impact driver, (1) 20 volt max battery, (1) charger, (2) screwdriver bits and (1) soft bag.
DRILL/DRVR KIT CMB LT-ION 20V DRILL/DRIVER 12V KIT LITH-ION Hitachi KC10DFL2  Cordless Impact Drill/Driver Kits
Compact, lightweight and powerful. Powered by lithium-ion; more power and double the run time of ni-cad. Batteries hold a charge for up to 18 months in storage. Includes drill, impact driver, (2) 20 volt batteries, charger, storage bag and (1) #2 Phillips bit. DRILL/DRIVER; high performance motor produces up to 350 in-lbs of torque. Variable speed trigger switch. 3/8" (10mm) single sleeve keyless chuck. 22 torque/clutch settings. Two variable speed ranges for versatility (0-350/0-1300 RPM). Built in LED work light. On-board battery power indicator. Electric brake. IMPACT DRIVER; 1/4" hex quick change locking collet. Variable speed switch (0-2200 rpm). Rubberized non-slip pistol grip. Cast aluminum gear housing. Incredible 1062 in-lbs of torque. Built-in LED work light. On-board battery power indicator. Electric brake. 3/8" driver-drill with 2 speeds (0-450 and 0-1,700 rpm) delivers up to 210 in. lbs of max torque. Features a compact design at only 7-716" long and weighs only 2.8 lbs with battery for reduced operator fatigue. Impact Driver with variable speed (0-2,600 rpm and 0-2,400 ipm) delivers up to 970 in. lbs of max torque. Features a compact design at only 6-1/8" long and weighs only 2.2 lbs with battery for reduced operator fatigue. Ergonomically designed handles with rubberized soft grips provide increased comfort. 12 volt slide battery design enables tool to stand for convenience. 12 volt compact Lithium -Ion 2.0 Ah battery BL1021B features in integrated L.E.D. battery charge level indicator. Built-in L.E.D. light illuminated the work area. Part of the expanding 12 volt CXT series, combining performance with superior ergonomics in a compact size. Not compatible with 12 volt max pod-style tools, batteries and chargers. The 2 piece combo kit includes: (1) 12 volt max CXT Impact Driver (Tool Only) (DT03Z), (1) 12 volt max CXT 3/8" Driver-Drill (Tool Only) (FD05Z), (1) 12 volt max CXT Lithium-Ion charger (DC10WD), (2) 12 volt max CXT Lithium-Ion 2.0 Ah batteries (BL1021B) and (1) tool case. Compact stature makes these tools ideal for hard to reach jobs. Lithium-Ion charger recharges the batteries. 12 volt drill driver with a 3/8" keyless chuck and 21 clutch plus 1 clutch with 21 torque settings and a drill mode for ultimate precision and control. 12 volt impact driver with 955 in/lbs of torque, up to 2,700 rpm, ideal for driving stubborn bolts and screws. Kit includes: (2) 12 volt Peak Lithium-Ion batteries that deliver steady power for the duration of every charge, (1) 12 volt Peak Lithium-Ion Driver drill, (1) 12 volt Peak Lithium-Ion Impact driver, (1) flashlight, (1) 40 minute quick charger and (1) lightweight padded nylon carrying bag.
Porter-Cable PCCK604L2  Cordless Impact Drill/Driver Kits Milwaukee 2494-22 Kit DRILL/IMPACT DRIVER COMBO 20V
20 volt cordless Lithium-Ion 1/2" drill driver. Two speed gear box between 0-350 and 0-1,500 rpm. Compact and lightweight design. Keyless 1/2" metal ratcheting chuck. Powerful 1,450 in-lbs of torque providing 3,100 BPM. 0-2,800 RPM variable speed to match speed to the application. One handed 1/4" hex chuck for bit changes on the fly. Includes 20 volt cordless Lithium-Ion 1/2" drill driver, 20 volt cordless Lithium-Ion 1/4" Impact driver, (2) 1.3 Ah Li-Ion batteries, Li-Ion standard charger, double ended screwdriver bit, no. 2 Phillips bit tip and kit bag. Drill driver delivers 275 in-lbs of peak torque, 3/8", 0-400/0-1,500 RPM. Impact driver delivers 850 in-lbs of torque, 1/4" hex, and 0-2,000 RPM for fast driving. Kit also includes two M12 Redlithium batteries, 30-minute charger and contractor bag. Power and versatility to tackle projects throughout the home and workshop. Compact and lightweight to improve comfort, control and access to tight spaces. Lithium Ion batteries for maximum run time and stay charged up to 18 months. Worx 20 volt lithium batteries fit a wide range of Worx cordless lawn and workshop tools. Includes 20 volt cordless drill/driver and impact drivers, (2) 1.5 Ah Lithium Ion batteries, a 1 hour charger, belt hook and carry bag.
Dewalt DCK211S2 Kit Makita LCT314W Cordless Kit Milwaukee 2691-22 Compact Kit
Drill/driver features a two-speed transmission that delivers 0-400/0-1,500 RPM, 3/8" keyless chuck, impact driver delivers 950 in/lb of torque and 1/4" hex chuck, three LED lights that provide visibility without shadows in dark work areas, a battery that has been placed at the bottom of the handle that allows the tool to stand up between uses. Includes: 2 tools, (2) 12V max Lithium-Ion battery packs, (1) bit tip, (2) belt hooks, (1) 40 minute charger, (1) contractor bag. Hammer driver-drill features 1/2" chuck, variable 2-speed, 0-400 & 0-1700 RPM, 4-pole motor delivers 560 in lb of max torque and weighs 5.3 lb. Impact driver features variable speed, 0-2,300 RPM & 0-3,200 IPM, provides 1,330 in lb of max torque and weighs 3.4 lb. 30-minute rapid optimum charger communicates with the battery's built-in ship throughout the charging process to optimize battery life. Charger has a built-in fan to cool the battery. Meets Energy Star guidelines. Includes two 18V LXT lithium-ion battery, 30-minute rapid optimum charger and tool case. Compact 1/2" drill/driver with 425 in-lbs of torque, weighs 4 lbs., 1/4" hex impact driver with 4-pole frameless motor with 1400 In/lbs. of torque. Includes: 2 tools, (2) 18V Red Lithium compact battery packs, (1) 18V charger, (1) carrying case.
DRILL/DRIVER 2TOOL COMBO KIT  Hitachi KC18DGL  Cordless Impact Drill/Driver Kits DRILL/DRIVER COMBO KIT 2PC 18V
Drill brushless motor provides extended runtime. Drill brushless motor provides 360 MWO for heavy and fast applications. Drill high performance 2-speed transmission with rpm's of 0-430 and 0-1700 for speed of fastening. Drill compact size of 8" for work in tight areas. Drill lightweight of 3.2 lbs is 14 percent lighter than brushed PCC601. Impact Driver brushless motor provides 50 percent more runtime. Impact Driver provides 1400 in-lbs torque for driving large fasteners. Impact Driver max rpm's of 2700 for speed of fastening. Impact Driver compact (5.8") and lightweight design (2.9 lbs) for ease of use. (2) Pro grade lithium ion batteries for maximum performance included. Powered by Lithium-Ion battery for fade free power and longer battery life. Lithium-Ion charger recharges batteries in just 35 minutes. Driver drill boasts 400 in/lbs of torque in an ergonomic, lightweight design at only 3.7 lbs. The impact driver weighs only 3.1 lbs, yet still delivers 1280 in/lbs of driving torque for heavier applications. Kit includes: (1) Driver drill, (1) impact driver, (2) Lithium-Ion batteries, (1) charger, (1) double ended Phillips driver bit and (1) carrying bag.
DRILL/DRIVER 18V KIT LITH-ION Porter-Cable PCCK615L4  Cordless Kits Dewalt DCK280C2 Kit
1/2" driver-drill with 2 speeds (0-600 and 0-1,900 rpm) delivers up to 480 in. lbs of max torque. Features a compact design at only 7-1/4" long and weighs only 3.3 lbs with battery for reduced operator fatigue. Impact driver with variable speed (0-2,900 rpm and 0-3.500 ipm) delivers up to 1,460 in. lbs of max torque. Features a compact design at only 5-3/8" long and weighs only 2.8 lbs with battery for reduced operator fatigue. Ergonomically designed handles with rubberized soft grips provide increased comfort. Built-in L.E.D. light illuminates the work area. 18 volt compact Lithium-Ion battery BL1820B provides more run time per charge and features an integrated L.E.D. battery charge level indicator. The 2.0 Ah battery reaches full charge in 25 minutes or less and is compatible with 18 volt LXT tools. Equipped with Star Protection computer controls to protect against overloading, over-discharging and over-heating. Rapid optimum charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. The charger has a built-in fan to cool the battery which helps produce more lifetime work. Compatible with Makita 18 volt Lithium Ion batteries with a Star symbol. Combo kit includes: (1) 18 volt LXT Cordless 1/2" Driver-Drill (Tool Only) (XFD10Z), (1) 18 volt Compact Impact driver (Tool Only) (XDT11Z), (1) 18 volt Lithium-Ion Rapid Optimum charger (DC18RC), (2) 18 volt Compact Lithium-Ion 2.0 Ah batteries (BL1820B) and (1) tool bag (831274-0). The kit includes the following: (1) PCC601 1/2" drill driver, (1) PCC641 1/4" impact driver, (1) PCC670 reciprocating tiger saw, (1) PCC700 LED flashlight, (2) PCC680L 20 volt Lithium-Ion batteries, (1) PCC691L charger and (1) kit bag. Two speed transmission drill/driver features 20V Max, 1/2" ratcheting chuck, 0-600/0-2,000 no load speed, and 15 clutch settings. Impact driver features 3 LED lights with 20 second delay to provide visibility without shadows, 1/4" hex chuck, 2800 rpm no load speed, 3200 ipm, and 1400 in-lbs max torque. Includes: 2 tools, 20V Max lithium ion 1.5 Ah battery packs, fast charger, (2) belt hooks, bit holder and contractor bag.
DRILL/IMPACT CMPT BRSHLESS 20V Milwaukee 2498-24 Kit Makita LXT211 Cordless Kit
Dewalt brushless motor delivers up to 57 percent more run time over brushed. Compact (7.52" front to back), lightweight Drill/Driver design fits into tight areas. LED light with 20 second trigger delay provides increased visibility in dark or confined spaces. Compact (5.4" front to back), lightweight (2.0 lbs) Impact Driver design fits into tight areas. Ergonomic comfort grip handle provides ideal balance and tool control. Impact driver's one-handed loading 1/4" hex chuck accepts 1" bit tips. Includes: (1) 20 v compact brushless Drill/Driver, (1) 20 v compact brushless 1/4" Impact Driver, (2) 20 v Max Li-Ion battery packs, (1) charger and (1) kit bag. Screwdriver delivers 175 in-lbs of torque, 15 position clutch and 0-500 RPM. Impact delivers best-in-class 850 in-lbs of torque, 1/4 hex and 0-2000 RPM. Hackzall reciprocating saw delivers 0-3000 SPM, and 11" for quick cutting in tight spaces. Work light features a 90-degree rotating head and an integrated magnet for hands-free. Kit also includes two 12V Redlithium battery packs. 30 minute charger, two Hackzall blades and contractor bag. Two speed 1/2" hammer driver/rill (0-400/0-1,500 RPM) with 4-pole motor delivers 450 in/lbs. of max torque and weighs only 4.2 lbs., variable speed impact driver (0-2,300 RPM) provides 1,330 in/lbs. of max torque and weighs only 3.4 lbs. Includes: 2 tools, (2) 18V LXT Lithium-Ion batteries, (1) 30 minute rapid optimum charger, (1) tool case.
Dewalt DCK413S2 Kit Dewalt DCK285C2 Kit DeWalt DCK281D2 Cordless Drill Kit
Drill/driver delivers 189UWO max power, 2 speed settings, 1,500 max rpm, 15 clutch settings, 3/8" one sleeve chuck, 0-400/0-1,500 rpm no load speed and weighs 2.4 lbs. Pivot reciprocating saw with keyless blade clamp, 0-2,700 spm, 9/16" stroke length, electric brake, adjustable 3-position handle, LED light, and weighs 3.1 lbs. 1/4" Impact driver delivers 950in-lbs/79ft-lbs of max torque, 0-2,450rpm no load speed, 0-3,400ipm, 3 LED lights, belt hook, one-handed loading and weighs 2.3 lbs. LED worklight provides 4 hour run time, 130 lumens output, kick stand, pivoting head rotates 360-degrees and weighs .5 lbs. Includes two 12 Max Li-Ion batteries, fast charger, bit tip, two belt hooks, 4" 6 tpi wood cutting recip blade, 4" 18 tpi metal cutting recip blade and kit bag. Hammerdrill features two speed transmission, 0-600/0-2000 max rpm, 34000 max bpm, 15 clutch settings, 1/2" ratcheting chuck and 350UWO. Impact driver features 3 LED lights with 20 second delay to provide visibility without shadows, 1/4" hex chuck, 2800rpm no load speed, 3200ipm, and 1400in-lbs max torque. Includes: 2 tools, (20) 20V Max lithium ion 1.5 Ah battery packs, fast charger, (2) belt hooks, on-board bit holder and a handy zippered bag. Brushless motor delivers more run time. XR Li-Ion batteries with fuel gauge provides more capacity. DCD790 20V Max 1/2" drill/driver compact (7.2" front to back), lightweight (3.5 lb) design fits into tight areas. DCF886 20V Max 1/4" impact driver compact (5.6" front to back) design fits into tight areas. Both tools feature LED lights with 20 second trigger release delay providing increased visibility in dark or confined spaces.
COMBO KIT 40AH 2PC 18V        Milwaukee 2791-22CT Cordless 2-Tool Kit DeWalt DCK286D2 Cordless Drill Kit
COMBO KIT 40AH 2PC 18V
Our Price: $297.48
The M18 2-tool combo kit includes the 1/2" Compact Brushless Hammer Drill Driver (2702-20) and the 1/4" Hex Brushless Impact Driver (2750-20). The M18 Cordless system's technologies and electronics, innovative motor design and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. The M18 1/2" Compact Brushless Hammer Drill/Driver is the most compact 18 volt drill on the market and delivers over 50 percent longer run-time than drills with brushed motors. The M18 1/4" Hex Brushless Impact Driver is the most compact Impact Driver in its class and delivers over 50 percent longer run-time than Impact Drivers with brushed motors. Both tools feature Milwaukee built brushless motors, REDLINK Electronics and REDLITHIUM batteries that provide more efficient power delivery, for few trips to the charger. This kit includes (1) REDLITHIUM XC 4.0 battery for maximum performance and 2x longer run-time, which is compact and light weight, ideal for fastening applications. The kit also includes a carrying case and a multi-voltage charger. DeWalt brushless motor delivers up to 57 percent run time. XR Li-Ion batteries with fuel gauge provides more capacity over standard pack. DCD795 20V Max 1/2" hammerdrill compact (7.8" front to back), lightweight (3.6 lb) design fits into tight areas. DCF886 20V Max 1/4" impact driver compact (5.6" front to back) design fits into tight areas. Both tools feature LED lights with 20 second trigger release delay providing increased visibility in dark or confined spaces.
Milwaukee 2697-22 Cordless Kit Dewalt DCK290L2 Kit Dewalt DCK292L2 Kit
Hammer drill/driver with 4-pole frameless motor delivers 525 in-lbs of peak torque, 0-550/0-1,700 rpm, 29,000 bpm, all metal 1/2" single sleeve ratcheting chuck and weighs 3.5 lbs. Compact impact driver with 4-pole frameless motor delivers 1,400 in-lbs of torque, 0-2,200 rpm, 0-3,200 ipm, 1/4" hex quick change chuck and weighs 2.6 lbs. Includes two M18 XC high capacity Red Lithium batteries, 1-hour charger and contractor bag. Hammerdrill features 3-speed all-metal transmission, 0-575/0-1,350/0-2,000 max rpm, 0-9,775/0-22,950/0-34,000 max bpm, 22 clutch settings, 1/2" all metal ratcheting chuck delivers 535UWO. Impact driver features 3 LED lights with 20 second delay to provide visibility without shadows, 1/4" hex chuck, 2800rpm no load speed, 3200ipm, and 1400in-lbs max torque. Includes: 2 tools, (2) 20V Max lithium ion 3.0 Ah battery packs, fast charger, belt hooks, 360-degree side handle and contractor bag. Hammerdrill features 3-speed all-metal transmission, 0-575/0-1,350/0-2,000 max rpm, 0-9,775/0-22,950/0-34,000 max bpm, 22 clutch settings, 1/2" all metal ratcheting chuck delivers 535UWO. Reciprocating saw features 4-position keyless blade clamp, 1-1/8" stroke length, variable speed with 0-3000 spm, pivoting adjustable shoe, rubber over molded comfort grip, double oil sealed shaft, and electric brake. Includes: 2 tools, (2) 20V Max lithium ion 3.0 Ah battery packs, fast charger, 360-degree side handle and contractor bag.
DRILL HAMMER/IMPACT 20V MAX XR Milwaukee 2695-24 Cordless Kit HAMMERDRILL/DRIVER CMB KIT 20V
20 volt Max 1/2" 3-speed hammer drill and 1/4" 3-speed impact driver. The 1/2" hammer drill is a high performance 0-2,000 rpm, all-metal transmission optimized tool-to-task for fast application speeds and improved run time. The compact size (8.4" front to back length) and lightweight (4.7 lb) design to fit tight areas. For fast drilling in masonry materials (0-38,250 bpm). Includes 3-mode LED providing lighting in dark or confined spaces up to 20 times brighter than the previous model. The 1/4" Impact driver provides 1,825 in-lbs of max torque at fast 0-3,250 rpm speed and 0-3,600 impacts per minute. The impact driver has a compact size (5.3" front-to-back length) and lightweight (3.4 lb) design. The kit includes: (1) DCD996 20V Max XR 1/2" 3-speed hammer drill, (1) DCF887 20V Max XR 1/4" Impact driver, (1) DCB203 20V Max XR 2.0 Ah Lithium Ion battery, (1) DCB606 20V/60V Max Flexvolt 6.0 Ah/2.0 Ah Lithium Ion battery, (1) DCB118 20V/60V Max Fan-Cooled rapid charger, (2) belt hooks, (1) 360 degree side handle and (1) Contractor bag. Hammer Drill/Driver with 1/2" chuck, milwaukee 4-pole frameless motor delivers 525 in-lbs of peak torque, 0-550/0-1,7000 RPM, and 29,000 BPM. One-Handed reciprocating saw features a dual gear anti-vibration system for unmatched comfort and control. 1/4" Hex Impact with the Milwaukee 4-pole frameless motor delivers 1400 in-lbs of torque. Work light provides a fold-away hook for hands free use and 135-degree rotating head to direct light at the work area. Digital Power Management overload protection prevents damage to the tool and battery in abusive situations. Works with M18 XC High Capacity Red Lithium batteries and M18 compact Red Lithium batteries. Includes (2) M18 XC High Capacity Red Lithium batteries, 1-hour charger, general purpose Sawzall blade and contractor bag. Features a 20 volt Max 1/2" Hammerdrill 3 speed, high performance (0-2250 rpm), all-metal transmission optimizes tool to task for fast application speeds and improved run time. The Hammerdrill has a compact size (8.4" front-to-back length) and lightweight (4.7 lb) design to fit tight areas and fast drilling in masonry materials. The 20 volt max Hammerdrill includes 3 mode LED, providing lighting in dark or confined spaces up to 20 times brighter than the previous model. Also features a 20 volt Max 1/4" Impact driver with 1825 in-lb of max torque at fast 0-3250 rpm speed and 0-3600 impacts per minute. The Kit includes: Hammerdrill, Impact Driver, 360 degree side handle, kit box (2) 20 volt Max XR high capacity Li-Ion batteries (5Ah), charger and (2) belt hooks. CSA certified; 1-UL listed.
Milwaukee 2797-22 Cordless 2-Tool Kit TOOL KIT COMPACT COMBO 4PC 20V HAMMER DEMOLITION 10AMP VS SDS
2 tool combo kit includes: (1) M18 Fuel 1/2" hammer drill/driver, (1) M18 Fuel 1/4" hex impact driver, (2) M18 Redlithium XC 4.0 extended capacity battery pack, (1) M18 and M12 multi-voltage charger, (1) belt clip, (1) carrying case and (1) side handle. Brushless motor works harder and lives longer, while reducing noise and cooling more rapidly to deliver years of maintenance free performance. Durable battery pack provides longer life. The 4-tool compact combo kit features a 20 volt max Drill/Driver with two speed transmission and LED lights for working in dark spaces; A 20 volt Max XR brushless 1/4" 3-speed impact driver that is compact for fitting in tight spaces. Three LED lights make it ideal for working in the dark; A 20 volt max XR brushless compact Reciprocating saw that is compact and lightweight to make your jobs easier and the bright Flashlight to illuminate your work area with LED output of 110 lumens. The Kit Includes: (1) 20 volt Max XR Li-Ion brushless compact Drill/Driver (Tool Only), (1) 20 volt Max XR 1/4" 3-speed Impact Driver (Bare Tool Only), (1) 20 volt Max XR brushless Compact Reciprocating Saw (Tool Only), (1) 20 volt Max LED work light, (1) 20 volt Max compact XR Lithium Ion battery pack and a contractor bag to carry your tools. Demolition hammer makes an ideal hammer for hard-to-reach applications. Delivers 5.6 ft-lbs of impact energy and a max of 2,800 BPM. Vario-Lock positioning allows for rotating and locking the chisel with precision. The SDS max chuck system provides tool-free bit changes. The demolition hammer has a 360? rotating auxiliary handle for better grip positioning and an ergonomic grip area for better comfort when chiseling in a wide variety of positions. Includes carrying case. Weighs only 12.4 lbs.
Dewalt DCK490L2 Kit Dewalt DCK491L2 Kit Milwaukee 2694-24 Cordless Kit
Hammerdrill features two speed transmission, 0-600/0-2000 max rpm, 34000 max bpm, 15 clutch settings, 1/2" ratcheting chuck and 350UWO. Reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft. Impact driver features 3 LED lights with 20 second delay to provide visibility without shadows, 1/4" hex chuck, 2800rpm no load speed, 3200ipm, and 1400in-lbs max torque. Flashlight features bright LED output, 11 hours run-time and head rotates 120-degrees. Includes: 4 tools, (2) 20V Max lithium ion 3.0 Ah battery packs, fast charger, 360-degree side handle, belt hook and contractor bag. Hammerdrill features two speed transmission, 0-600/0-2000 max rpm, 34000 max bpm, 15 clutch settings, 1/2" ratcheting chuck and 350UWO. Reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft. Circular saw features 6-1/2" carbide blade that can cut 2x4's at a 45-degree angle in a single pass. Flashlight features bright LED output, 11 hours run-time and head rotates 120-degrees. Includes: 4 tools, (2) 20V Max lithium ion 3.0 Ah battery packs, fast charger, 360-degree side handle, carbide tipped blade and contractor bag. Hammer drill/driver with 1/2" chuck, 4 pole frameless motor, 525 in/lbs of peak torque, 0-550/0-1,700 RPM, and 29,000 BPM, sawzall reciprocating saw with gear protecting clutch and counter balance mechanism, 6-1/2" circular Saw delivers 3,500 RPM with magnesium upper and lower guards for maximum durability, work light provides a fold away hook for hands free use and a 135 degree rotating head to direct light at the work area. Includes: 4 tools, (2) HC high capacity Red Lithium battery packs, (1) one hour charger, (1) general purpose sawzall blade, (1) contractor bag.
Dewalt DCK590L2 Kit TOOL COMBO KIT CDLSS 4PCM18   Bosch 11316EVS Corded Demolition Hammer
Hammerdrill features two speed transmission, 0-600/0-2000 max rpm, 34000 max bpm, 15 clutch settings, 1/2" ratcheting chuck and 350UWO. Impact driver features 3 LED lights with 20 second delay to provide visibility without shadows, 1/4" hex chuck, 2800rpm no load speed, 3200ipm, and 1400in-lbs max torque. Circular saw features 6-1/2" carbide blade that can cut 2x4's at a 45-degree angle in a single pass. Includes: 5 tools, (2) 20V Max lithium ion 3.0 Ah battery packs, fast charger, 360-degree side handle, belt hook, carbide tipped blade and contractor bag. 4 piece kit includes: (1) M18 fuel 1/2" hammer drill driver (Bare Tool 2704-20), (1) M18 Fuel SawZall Reciprocating saw (Bare Tool 2720-20), (1) M18 LED work light (2735-20), (1)M18 Fuel 1/4" Hex impact driver (Bare Tool 2753-20), (2) M18 Redlithium XC5.0 extended capacity battery packs (48-11-1850), (1) M18 & (1) M12 Multi-Voltage charger (48-59-1812), (2) belt clips, (2) bit holders, (1) Contractor bag, (1) SawZall blade and (1) side handle. Variable speed dial, SDS max bit system tool-free bit changes with automatic bit locking, constant response circuitry  provides soft start, maintains constant speed under load, provides overload protection, service minder light indicates when preventative maintenance is required, lock positioning rotates and locks chisel into 12 different positions, padded rear handle, 360 degree auxiliary handle, double insulated, UL listed, complies to OSHA. Specs: 120V, 4.4-18.4 ft./lbs., 900-1,890 BPM, 12 ft. cord, 22.5" long, weighs 22.5 lbs. Includes: auxiliary handle, carrying case.
CUTTER POWER 61CC 14IN        HAMMER DEMOLITION 15AMP VC SDS CUTTER PWR 81CC 16IN
CUTTER POWER 61CC 14IN
Our Price: $831.82
CUTTER PWR 81CC 16IN
Our Price: $1,108.93
Ideal cutting solution for metal decking, angle iron, I-beams, cast iron pipe, brick/masonry, stone/concrete blocks, railroad rails, road curbs, and asphalt. Powered by a 61cc engine with a full 4.4 HP for the most demanding concrete cutting applications. Engineered to start easier and vibrate less. Features Stratified Air Scavenging (SAS) that recovers up to 75 percent of unburned fuel to reduce fuel consumption, and a cyclonic air intake that discards larger debris for increased air filter life and less maintenance. Start capacitor with start support function results in significantly less pull start force. Specs: No Load Speed/Max Spindle Speed: 9850/4400 RPM, Wheel Diameter: 14", Cutting Depth: 5-1/8", Weight: 19.6 lbs. Includes: Universal Wrench, Torx Wrench, Screwdriver, and Adapter Ring. This demolition hammer features an in-line design, for ideal weight distribution while chiseling concrete in downward or horizontal applications. Delivers 17 ft-lbs. of impact energy and a max of 1,700 BIM, yet weighs only 22.4 lbs for excellent power to weight ratio. This hammer provides Constant Response circuitry for constant power under load, as well as smooth starts and overload protection. Variable speed dial allows the operator to match the hammering power to application from 900 BIM to 1,700 BIM. For added user comfort, it features Vario-Lock positioning for rotating and locking the chisel with precision, a 360? rotating auxiliary handle and a padded rear handle for extra comfort. The SDS-max chuck system provides tool-free bit changes. Includes carrying case. Gas power cutter engineered to meet the demand for convenience and performance. It delivers with faster starting, more power, and improved fuel economy. The ignition coil with start-support function stores electrical power with each pull for easier start-ups. It?s engineered for reduced flooding with a carburetor that includes improved deco-valve and metering spring for precise fuel regulation at start up. Efficient fuel consumption with an SLR muffler recycles unburned fuel vapor for reduced scavenging-losses and 15 percent improved consumption. 5-Stage filtration system with advanced directional air flow, for better saw performance. Powered by a 81cc 2-stroke engine with a full 5.6 HP for the most demanding concrete cutting applications. Specs: No Load Speed/Max Spindle Speed: 9350/3820 RPM, Wheel Diameter: 16", Cutting Depth: 5-3/4", Dry Weight: 23.3 lbs. Includes: 16" Abrasive Cut-Off wheel, Universal Wrench, Torx Wrench, Carburetor Screwdriver, Adapter Ring, and Water Attachment Kit.
CUTTER PWR 4-STRK 75.6CC 14IN Bosch 11335K Keyless Corded Breaker Hammer Bosch Brute Corded Breaker Hammer With Basic Cart
CUTTER PWR 4-STRK 75.6CC 14IN
Our Price: $1,119.48
Use for a range of professional concrete cutting applications and is ideal for landscapers, road construction crews, railroad crews, rescue crews, general steel contractors, masons, and welders. Pressure compensated carburetor with vented choke plate reduces flooding. Integrated wheel kit retracts when not in use. Fuel primer bulb for easier cold starts. 5-Stage filtration system for better engine durability. Powered by a 75.6cc 4-stroke engine with a full 4.1 HP for the most demanding concrete cutting applications. Specs: No Load Speed/Max Spindle Speed: 9100/4300 RPM, Wheel Diameter: 14", Cutting Depth: 4-13/16", Dry Weight: 28.3 lbs. Includes: Universal Wrench, Torx Wrench, Screwdriver, Adapter Ring, Maintenance Kit, Water Attachment, and Coupling. All metal housing with active vibration control, shock absorbing top handle reduces vibration by up to 40 percent, tool balance with multiple grip positions in angled, horizontal, and vertical applications, large main handle, well positioned lock on switch, 360 degree articulating auxiliary handle, convenient storage and easy transportation, two way tool retainer; accepts standard 1-1/8" (28mm) hex, air tool steel with retaining collar or Bosch internal locking combo steel. Specs: 120V, 1300 BPM, 34 ft./lbs. impact energy, cULus certifications, 30" long, weighs 38.0 lbs. Includes: (1) pointed chisel (400 mm), (1) articulating auxiliary handle, (1) carrying case with wheels, (1) grease tube, (1) cleaning rag. Plug in hammer does not need a compressor, use with 15 amp outlet or 2500 watt portable generator, 8" foam tires, folding foot plate, truck ramp for easy loading, accessory holders, ServiceMinder brush system, grease packed gear box and hammer mechanism, accepts standard 1-1/8" hex, air tool steel with retaining collar of Bosch internal combo steel, shock mounted handle. Specs: 115/120V AC/DC, 43 ft./lbs.impact energy, 1400 BPM, cULus  certifications, 12 ft. Cord, 29-3/4" long, weighs 64 lbs. Includes: hammer, hammer hauler cart, quick-release strap, moil point chisel (SKU# 866.2843) and  narrow chisel (SKU# 098.6174).
   
 
1