Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > POWER SHEARS/SIDING SHEARS
Sort By:
1
TOOL OSCILLATING MULTI-PURPOSE Black & Decker BDCMTR Matrix Router Attachment OSCILLATING TOOL V-SPD 2 AMP
Incredibly versatile tool for home projects, repairs and remodeling. 21,000 OPM for fast sanding, grinding, cutting, sawing and scraping. 4 pin flange design holds accessories firmly in place. Includes 3" delta sanding pad, assorted sandpaper, scraping blade, 30mm E-cut saw blades, HSS segment saw blade, Allen wrench and accessory storage box. Powerful performance for most trimming, small edge forming, decorative woodworking and hinge routing applications. Quick adjust button that allows for quick adjustment up to 1''. Spindle lock button allows for single wrench bit changes. Allows for quick depth adjustment up to 5/8''. Variable speed allows for precision performance that's right for each job. Oscillating tool with Universal Fit blade system. Variable speed 11,000-20,000 oscillations provide the right speed for various tasks. 3.2? oscillation angle. 10 ft cord to allow most uses without an extension cord. Lightweight at only 2 lbs. Included accessories: (1) end cut blade, (1) semi circle blade, (1) key and (1) sanding pad with 3 sheets of paper.
Skil 7510-01 Corded Sander with Pressure Control OSCILLATING TOOL VS 2.5A QUICK OSCILLATING TOOL V-SPD 2.5AMP
Sands any type of wood surface, micro filter dust canister helps keep work area clean, auto track belt alignment keeps belt centered, soft grip, flush edge sanding, Lock-on on/off switch, attachment for shop vacuum controls dust as you sand. Specs: 120V, RPM (loaded) 1050, 6 ft. cord length, weight 8.2 lbs. Includes: (1) sanding belt, dust collection canister, vacuum adaptor. For home repair, remodeling and restoration. Use as a detail sander, flush and plunge cut saw, drywall cut-out tool, power scraper, grout removal tool and more. Tool-free quick-change accessory system. Powerful 2.5 amp motor. Variable speed (15,000-22,000 OPM) for versatility. 6-pin flange design holds accessories firmly in place. Weighs only 3.2 lbs. Die-cast aluminum gear housing. Includes: 3" delta sanding pad, (12) sanding triangles, rigid scraper blade, 1-3/8" (35mm) Bi-metal flush cut blade, HSS segmented saw blade, 1-3/4" coarse tooth flush cut blade and accessory storage box. 2.5 amp oscillating tool with Universal Fit blade system. Variable speed 11,000  to 20,000 oscillations provide the right speed for various tasks. 3.2 degree oscillation angle. 6.5 ft. cord to allow most uses without an extension cord. Lightweight at only 2.5 lbs. Includes: (1) end cut blade, (1) semi circle blade, (1) sanding pad with 3 sheets of paper and (1) key.
Dewalt DW660 Corded Cut Out Tool Dragster DS321 Corded Sander Rotozip SS355-10 Corded Spiral Saw
Tool free bit change for fast and easy bit changing without a wrench, turn on/bump-off switch, slim body design for less fatigue over prolonged use, dust-Sealed Switch protects against dust ingestion for longer switch life. Specs: 5.0Amps no load speed 30,000 RPM, collet diameter 1/8", 1/4", adjustable guide, spindle lock, 10" length, weight 3.2lbs. Includes: (1) drywall cutting bit, 1/4", 1/8" collets. Angled belt sands three times closer to the edge of the adjoining surfaces, retractable hood exposes top of sanding belt for use in a variety of applications, three position adjustable handle, dust collection with easy empty dust bag. Specs: ft/min 800 fpm. Includes: sander, medium grit sanding belt, dust bag, manual. Designed to tackle plunge and feehand cuts in nearly any building material. Compatible with all XBits and ZipBits. Specs: 30,000 rpm MagnaCore motor, dual grip zones, spiral system, bump switch, dust victoring exhaust vents. Weighs 3 lbs. Includes a drywall guidepoint ZipBits, a multipurpose ZipBits, and 1/8",  5/32", and 1/4" collets.
Rockwell SS4300K Shop Series Belt Sanders Black & Decker BD200MTB Corded Multi-Tool Kit OSCILATING TOOL 3.5AMP F30 KIT
Variable speed for optimum finish. 3" x 21" - 3" x 5-1/2" platen; variable speed 790 - 1,300 sfpm. Rubber grips for comfort and control. 10' power cord. Includes dust bag and sturdy plastic carrying case. Tool free release lever eliminates the need for a hex key. Variable speed dial has six speed settings. Includes rigid scraper, 1 in wood/metal blade, 12 sandpaper sheets, sanding base and carrying bag. Specifications: 120 voltage, 10,000-20,000 rpm, AC power source and 1.4 degrees oscillating angle. Weighs 4.5 Lbs. Hyperlock tool-free blade change system provides 1 ton of clamping force to prevent blade slippage. Universal Fit System accepts other major brand accessories. Higher oscillation angle provides unrivaled speed of cut. Powerful 3.5 amp motor with constant speed control won't stall. Variable speed dial for precision control. 32 piece kit includes a variety of blades and sanding attachments for a wide range of applications. Voltage 120V-60Hz. Oscillation speed 11000-20000 opm. Oscillation angle 5". Cord length 10 feet. Tool weighs only 3.3 lbs. Voltage 120V-60Hz. Oscillation speed 11000-20000 opm. Oscillation angle 4?. Cord length 10 feet. Tool weighs only 2.9 lbs.
Rockwell RK5121K Sonicrafter Oscillating Tools TOOL OSCILLATING KIT 3.3A     SAW SPIRAL VS 6AMP
TOOL OSC 3.3AMP KIT
Our Price: $97.14
Hyper-lock tool-free change system provides 1 ton of clamping force to prevent blade slippage. Variable speed dial for precision control. Universal fit system accepts other brands accessories without the need for an adaptor. Use to cut, saw, scrape, sand, shape, polish and remove grout. New, slimmer rear profile allows for better control and comfort, while still maintaining a powerful motor. 3.2 degree oscillating angle allows for faster, more aggressive cuts. Variable speed 11,000 to 21,000 opm; 10 ft. cord; 30 accessories. Includes nylon storage bag. Quick release on-tool integrated wrench. Extra-wide 3.2 degree oscillation angle provides faster cutting and performance. Quick hold magnet holds the accessory in place making tightening the clamping screw significantly easier for the user. Ergonomically optimized soft grip for comfort and control. 10,000-23,000 OPM. Includes a carry bag to store tool and accessories. Powerful 6.0 amp motor designed to tackle the toughest materials. Lightweight dust vault attachment reduces 90 percent of dust and debris, keeping your work space clean. Variable speed, 15,000 to 30,000 rpm provides maximum accessory performance and tool control. Collect dust without the use of a vacuum and no hose is required. Constant Speed Technology maintains power and speed under load. Kit contains: (1) Roto Saw, Spiral and Tool, (1) Dust vault attachment, (1) Drywall Guidepoint ZipBits and (1) 1/8", 5/32" and 1/4" Collets.
Porter-Cable PCE606K Oscillating Multi-Tool Kit Colt PR10E Electronic Single Speed Corded Palm Router Makita RT0701C Compact Router
3 amp motor delivers power to complete applications fast. Tool free system blade change allows quick changes and adjustments. Variable speed dial (10,000 - 22,000 opm). 3 position over mold handle. 8' cord. Rugged aluminum fixed base, fast and precise depth adjustment system, unique finger support pockets, fixed base accepts bits up to 1-5/16"  diameter, soft-start, monitors and maintains speed under load for consistent performance and provides overload protection, versatile bit-changing system, quick-clamp system, palm-grip, angled cord exit. Specs: 1-9/16" base opening, 1/4" collet capacity, no load RPM: 35,000, 1-3/16" plunge depth, 7.5" high, weighs 3.2lbs. Includes: (1) 1/4" self-releasing collet chuck, (1) 17 mm collet wrench, (1) 10 mm shaft wrench, (1) fixed base. Variable speed control dial (10,000-30,000 rpm) enables user to match the speed to the application. Smooth rack and pinion fine depth adjustment system for more precise settings. Slim and ergonomically designed body for increased comfort and control. Quick release cam lock system for easy depth adjustments and base removal/installation. Electronic speed control maintains constant speed under load. Soft start feature for smooth start ups. Base accepts industry standard template guides. High visibility base design for improved handling and performance. Base can be removed quickly to install other bases (plunge, tilt and offset). Heavy duty aluminum motor housing engineered for increased durability. Shaft lock for quick and easy bit changes. Durable flat top design for added convenience when changing bits. Non-marring high durability base insert for increased work place protection. Easy to read depth scales. Uses 1/4 shank router bits. Double insulated. Ideal for routing small profiles, dovetailing, door hinges and more.
OSCILATING TOOL 4.0AMP F50 KIT ROUTER COMPACT 18V            Pactool SS201 Corded Sheet Metal Shear
ROUTER COMPACT 18V
Our Price: $128.94
Hyperlock tool-free blade change system provides 1 ton of clamping force to prevent blade slippage. Universal Fit System accepts other major brand accessories. Higher oscillation angle provides unrivaled speed of cut. Powerful 4.0 amp motor with constant speed control won't stall. Variable speed dial for precision control. 33 piece kit includes a variety of blades and sanding attachments for a wide range of applications. Voltage 120V-60Hz. Oscillation speed 11000-20000 opm. Oscillation angle 5?. Cord length 10 feet. Tool weighs only 3.3 lbs. Cuts mild steel sheet metal up to 18 gauge with a rugged 4.8 amp motor; cuts smooth, fast and there is no dust or shards to clean up.
Porter-Cable Tradesman PCE605K Corded Multi-Tool Kit Dewalt DW616 Fixed Base Corded Router Porter-Cable 9690LR Round Base Corded Router Kit
Tool free system blade change allows quick changes and adjustments for specific applications without wrenches and bolts. Depth and cutting guide helps complete plunge and cutting tasks faster and with more control. 3 position over mold provides gripping are on the front, middle and rear to improve comfort by reducing vibration. Includes a depth/cutting guide, precision wood end-cut, flush cut blade, sanding platen, 25 sandpaper sheets, flexible scraper and kit box. Specs: 10,000-22,000 opm, 2.8 Oscillation angle, 11" length, 10 ft cord and weighs 3.7 lbs. Micro-fine depth adjustment ring in 1/64" increment, adjustable tool-free steel motor cam lock with quick release motor latches, adjustable, tool free steel motor cam lock, quick release motor latches, detachable cordset, clear, Lexan sub base, rubber overmolded handles, right or left switch and cordset location, flat top, self releasing, long, eight slotted collets. Specs: 24,500 RPM, collet diameter 1/2", 1/4", depth stop micro-fine ring, 6" base dimension, 7.1lbs. tool weight. Includes: fixed base router, 1/4" and 1/2" one piece self-releasing collets, (2) wrenches and sub base concentricity gauge. Micrometer depth adjustor accurate to 1/128", cam lock lever enables simple coarse height adjustments and motor release (fixed base), dust sealed switch and sealed ball bearing construction, precision machined aluminum motor housing and base, auto release collet system for easy bit removal after use, collets included to accept 1/4" and 1/2" shank bits, under table stop, overmolded grips. Specs: 1-3/4 peak HP, 120V/AC, 25-60 Hz, 27,500RPM, 3-1/2" motor diameter, 1/4" & 1/2" collets, round base, LxWxH is 12"x5.5"x8-5/8", weighs 8lbs. Includes: router motor, fixed base, 1/4" & 1/2" collets, (1) collet wrench, carrying case, operating manual.
Porter-Cable 690LR Round Base Corded Router TOOL OSCILLATING W/ACCESS KIT OSCILATING TOOL 4.2AMP KIT
OSCILATING TOOL 4.2AMP KIT
Our Price: $158.72
Micrometer depth adjustor accurate to 1/128", Cam lock lever enables simple coarse height adjustments and motor release, precision machined aluminum motor housing and base, dust sealed switch and sealed ball bearing construction, auto release collet system allows for easy bit removal, collets included to accept 1/4" and 1/2" shank bits, Under table stop prevents motor from inadvertently rotating out of base, Over molded grips for greater comfort. Specs: 120V/AC, 25-60Hz, 27,500RPM, 3-1/2" motor diameter, 1/4" & 1/2" collets, 5-3/4" round base, LxWxH (12"x5.5"x8-5/8"), weighs 8lbs. Includes: router motor,1/4" & 1/2" collets, collet wrench, operating manual. Powerful 250 watt Fein high performance motor for optimal cutting speeds and maximum work progress. . High quality and stability thanks to metal gear case and consistent use of ball or needle bearings. 11,000-20,000 OPM. Lightweight cutting at only 3.1 lbs. Tool cord length is 16'4". Convenient quick change clamping system. Electronic speed control with generator for constant speed, even under load. Integrated interface for mounting additional accessories. Starlock mounting for ideal torque transfer. Kit includes: 1 FEIN MultiMaster FMM250QSL, 1 backing pad, 3 of each sanding sheets (80, 120, 180 grit), 1 Universal E-Cut blade 1-3/4" long and a nylon bag for storage. 3.4 degree and 5 degree Duotech Oscillation technology puts speed and control into one tool ensuring you have the proper power and precision no matter what type of cut you're making. Lets you select between 2 modes: power and precision, to fit your job. Use the 3.4 degree angle for controlled cuts or switch to the 5 degree angle for faster cuts. Universal fit system accepts other major brand accessories. Powerful 4.2 amp motor with constant speed control. Hyperlock tool-free clamp provides 1 ton of force to prevent slipping. Variable speed dial allows for precision control, while Rockwell's Vibrafree counterweight offsets vibration for a smooth cut. Includes 10 accessories, plus a hard carrying case.
Dewalt DWP611 Compact Corded Router Pactool SS204 Corded Siding Shear Bosch 1617EVS Electronic Fixed Base Corded Router
Variable speed control with soft starting motor features full time electronic feedback that maintains motor speed through the cut. Dual LED's and clear sub base ensure maximum visibility, adjustment ring enables controlled bit depth changes, large, low-pressure spindle lock button, multiple shaft lock detents, depth ring, clamping mechanism and spring loaded release tabs. Specs: 7.0 amps, 16,000-27,000 RPM no load speed, 1/4" collet diameter, 1.5" plunge stroke, 4" base dimension, 12 position spindle lock, weighs 4.1 lbs. Includes: motor, standard base, wrench and instruction manual. Cuts fiber cement siding up to 5/16" thick. Smooth, fast, and dust-free operation. Reversible blades, machined from solid tool steel. Variable speed dial for matching speed to workpiece and task. Macro and microfine bit depth adjustment system with re-settable depth indicator. Precision centering design makes it easy to keep bit on intended cutline when using jigs, templets, dovetail fixtures and similar guidance devices. Right or left switch location for user preference and consistency. Classic hardwood handles. One-piece armature shaft. Soft start reduces start-up torque. Constant Response circuitry maintains constant speed under load. Provides overload protection. RA1161 Fixed base with system has threaded holes for mounting to router table positioned in common 3-hole pattern. Includes 1/4" and 1/2" S.R. collet chuck, 16mm shaft wrench, collet nut wrench, chip shield, 10 ft. flexible rubber cord and t-handle hex height adjustment wrench. Spec: 6" base diameter, 3-3/4" base opening, 1/4", 1/2", and 8mm collet capacity, 10' cord length, 8,000 - 25,000, 120 V AC rating, and 2" subbase opening.
Porter-Cable 352VS Corded Sander Milwaukee 5615-21 Double Insulated Corded Router Kit DeWalt DWE315K Oscillating Multi-Tool Kit
Variable speed dial, motor is located over platen for performance and balance, belt and gear drive system transfers power from the motor to the sanding belt, flush sanding up to vertical surfaces, dust bag swivels 360 degrees, fingertip belt tracking knob, quick release belt change lever. Specs: 120V/AC, 25-60 Hz, SFPM 850-1,300, 12.5"Lx5.75"Wx10.38"H, weight 10.75 lbs. Includes: (1) 100g ceramic aluminum oxide belt, dust bag assembly. Linear depth adjustment features a large steel motor lock lever and depth adjustment gearing via a durable threaded screw integral to the motor itself; both coarse and microfine adjustments are fast and accurate, over molded rubber grip with an adjustable handstrap that allows for left and right handed operation, and two over molded palm grip side handles for superior comfort, router sub base includes a special access hole for a common 3/8" hex extension wrench for above the table depth adjustments. Specs: Max HP  1.7, no load RPM  24,000, collet diameter  1/4"-1/2", depth adjustment range  1-21/32", 6" base dimensions, 8ft, fixed cord, double insulated, rocker switch, 8-1/2" high, weighs 8.8lbs. Includes: (1) router, (2) 1-1/8" collet wrenches, 1/2" & 1/4" collets, carrying case. Rental. Powerful 3.0 amp motor provides strong performance for cutting and sanding. Quick change accessory system allows blades and attachments to be changed quickly without wrenches. Dual-Grip variable speed trigger gives users ultimate speed and application control. Bright LED light illuminates dark work surfaces for accurate cutting. Allow users to set the depth or height for accurate repeatability. 29 piece accessory kit includes: wood with nails blade, fast cut wood blade, semi-circle blade, sanding pad, 25 sheets of sand paper, Dewalt Oscillating tool guide system, accessory storage box, multi-brand accessory adaptor and contractor bag.
Milwaukee 6852-20 Corded Swivel Power Shear Porter-Cable 691 Round Base Corded Router Dewalt DW890 Corded Swivel Head Shear
Variable speed trigger, lightweight, heavy-duty magnesium gear case, 360 degree swivel head, ergonomic tactile grip. Specs: 120V/AC, 0-2,500 SPM, Capacity in: (steel-18 gauge) (stainless-20 gauge), double insulated, trigger lock, 7" minimum cutting radius, 10 ft. fixed cord, 12-1/4" long, weighs 4.1 lbs. Includes: hex wrench. Micrometer depth adjustor accurate to 1/128", GripVac handle allows for both single hand gripping and enhanced router control when used in conjunction with standard knob, D-handle incorporates trigger switch with lock-on feature, precision machined aluminum motor housing and base, dust sealed switch and sealed ball bearing construction enhance tool durability, auto release collet system allows for easy bit removal, collets included to accept 1/4" and 1/2" shank bits. Specs: 120V/AC, 25-60Hz, 27,500RPM, 3-1/2" motor diameter, 1/4" & 1/2" collets, round base, trigger switch, LxWxH (10.5"x7.75"x8-5/8"), weighs 9.25lbs. Includes: router motor, D-handle base, 1/4" & 1/2" collets, collet wrench, operating manual. Variable speed dial, all ball-bearing motor for long life, head swivels 360 degrees, cuts 7/32" strip which continuously curls out of cutting area for clear line of sight, cuts radius of 5-1/2" and larger. Specs: max watts out 470W, strokes/min 0-2,500 SPM, capacity in: (mild steel) 18 gauge (stainless steel) 20 gauge, replacement parts: left/right blade, center blade, 9.1" long, weighs 5.0 lbs.
Q.E.P. 10-56  Jamb Saws Fein Multimaster Start Q Kit Porter-Cable 892 Round Base Corded Router Kit
Extended "tail" for maximum leverage against torque. Powerful, 1100 watt industrial grade power unit, 120 volt. Adjustable cutting depth guide prevents cutting into plaster or wall board when trimming base boards. Design enables saw to cut full inside corners in molding up to 1/2" thick. Precision height adjustment from "flush" to 1-1/16". Convenient 1-1/2" vacuum port for optimal dust containment. Self-supporting motor with vibration decoupling for ideal vibration and noise reduction. Powerful 350 watt Fein high performance motor for optimal cutting speeds and maximum work progress. High quality and stability thanks to metal gear case and consistent use of ball or needle bearings. Lightweight cutting at only 3.1 lbs. Tool cord length is 16'4". Convenient quick change clamping system. Electronic speed control with generator for constant speed, even under load. Integrated interface for mounting additional accessories. Soft-grip zone provides optimal handling. Starlock mounting for ideal torque transfer. Kit includes: 1 FEIN MultiMaster FMM350QSL, 1 backing pad, 3 of each sanding sheets (80, 120, 180 grit), 1 universal E-Cut blade 1-3/4" long and a nylon bag for storage. Variable speed control enables bit speed to be optimized for changing applications, rack and pinion adjustment provides fine depth, settings to 1/128", dual position switch allows user to cut power while maintaining control of the router, overmolded grips for greater comfort in extended use, spindle lock for single wrench bit changes, durable latch lever, collets included to accept 1/4" and 1/2" shank bits. Specs: 120V/AC, 60Hz, no load speed 10,000-23,000RPM, 3-1/2" motor diameter, 1/4" & 1/2" collets, round base, 9"l x6"w, height: At Zero-9.9", tallest-11.1", weighs 9lbs. Includes: router motor, fixed base, 1/4" & 1/2" collets, collet wrench, carrying case, operating manual.
Dewalt DW616PK Fixed Base Corded Router Kit Bosch 1617EVSPK Corded Router Kit Dewalt D28605 Corded Siding Shear
Clear, Lexan sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings, heavy duty, machined die-cast aluminum base and motor housing, sub base concentricity gauge included to ensure bit concentricity, machined brass bushings, case-hardened steel guide rods, quick release motor latches, detachable cordset, adjustable, tool free steel motor cam lock, dust-Sealed Switch, easy to reach plunge lever and switch, five position, adjustable turret, micro-fine depth adjustment on plunge base,  flat top, self-releasing, long, eight slotted collets, right or left switch and cordset location, rubber overmolded handles and low center of gravity. Specs: no load speed 24,500RPM, collet diameter-1/2", 1/4", plunge stroke - 2-1/2", depth stop- micro-fine depth adjustment ring, base dimension 6", weighs 10.0lbs. Includes: motor pack of (1) fixed base, (1) plunge base routers, 1/4" and 1/2" collets, (2) wrenches, sub base concentricity gauge, vacuum adapter, kit box. Variable speed dial, soft-start, maintains constant speed under load, quick clamp system on both bases, includes fixed base with system for adjusting bit height from above a router table, precision centering makes it easy to keep bit on intended cutline when using jigs, templets, dovetail fixtures and similar guidance devices, fixed base has threaded holes for mounting to router table positioned in Bosch 4-hole pattern and common 3-hole pattern, microfine, bit, depth adjustment system on both bases, wide base openings and 2" subbase openings and provides better visibility, right or left. switch, location, dust sealed power switch, contoured soft grip handles, double insulated. Specs: 120V/AC, base diameter: 6" fixed/6-11/16" plunge, 1/4, 3/8", 1/2", 8mm collet capacity, no load RPM: 8,000-25,000, 10ft. cord, weighs 19.5lbs. Includes: plunge base, fixed base, fixed base chip shield, plunge base chip shield, 1/4" self-releasing collet chuck, 1/2" self-releasing collet chuck, 16mm shaft wrench, 24mm collet nut wrench, T-handle hex height adjustment wrench, carrying case. Variable speed, all ball-bearing motor for increased power when cutting 5/16" cement fiber siding, head swivels 360 degrees, reversible dual cutting edge, replaceable center and side blades. Specs: max watts out 800W, strokes/min 0-2,500 SPM, 9.1 long, weighs 4.5 lbs.
Dewalt DW618PK Fixed Base Corded Router Kit Makita 9903 Corded Sander Hitachi M12VE Plunge Corded Router
Electronic variable speed with full feedback control for constant speed under load and soft start to reduce start up torque, micro fine depth adjustment ring provides precise depth adjustments in 1/64" increments, adjustable, tool free steel motor cam lock, through-the-column dust collection, quick release motor latches, detachable cordset, subbase concentricity gauge, machined brass bushings and case-hardened steel guide rods, spindle lock button, clear, Lexan subbase provides enhanced base durability, bit visibility, and accepts standard template guide bushings, rubber overmolded handles and low center of gravity, dust sealed switch, heavy duty, precision machined, die-cast aluminum base and motor housing, nickel plated motor housing. Right or left switch and cordset location, flat top, self-releasing, long, eight slotted collets, five position, adjustable turret, micro fine depth adjustment on plunge base 5/128" per turn for precise routing in veneer and inlays, easy to reach plunge lever and switch. Specs: no load speed 8,000-24,000RPM, 1/4" & 1/2" collets, plunge stroke-2-1/2", depth stop micro fine depth adjustment ring, 6" base dimension, spindle lock, weighs 10.1lbs. Includes: motor pack, fixed base, plunge base, 1/4" & 1/2" collets, wrench, sub-base concentricity gauge, large hole sub base, vacuum adapter, kit box. Variable speed control dial matches the speed to the application, auto tracking belt system, sands flush to wall with nose and side of sander, front grip, dust bag. Specs: 120V, only 85dB, ft./min. 690-1,440 , 11-5/8"L, 16.4 ft. power cord, double insulated, weight  9.5 lbs. Includes: (1) #80 abrasive belt, dust bag. Heavy-duty power for fast, clean cuts. Multi-slide scale and index system for accurate plunge depth adjustment. Variable electronic speed control with soft start switch prevents torque kick-back. Three position adjustable handles provides more comfort and control during use. Lightweight design facilitates maneuverability and ease of use. Optimal for fine milling applications. Exclusive accessory pack comes standard. STANDARD EQUIPMENT: Straight guide, bar holder, feed screw, 3 wing bolts, 11/16" template guide, wrench, straight bit, chuck sleeve, template guide adapter, 2 lock springs. SPECIFICATIONS: 15 Amps, 3.25 horsepower, 1/2" max collet capacity, 8,000-20,000rpm no-load speed, 2-7/16" plunge stroke, spindle lock, base dimensions 7-3/32" x 2-3/4".
Pactool SS404 Corded Snapper Shear Dewalt DW621 Plunge Corded Router Porter-Cable 7518 Round Base 5-Speed Corded Router
Cuts fiber cement siding up to 5/16" thick with a smooth, fast, and dust-free operation. Based on a 1/2", 6.5-amp motor. Reversible blades machined from solid tool steel. Full wave electronic variable speed motor with soft start runs, rack and pinion depth adjuster, integral dust collection system, spindle lock button, rubber-coated knobs have plunge-lock and on/off built-in, one-piece motor shaft and spindle ensures perpendicularity and accuracy, guide Bushing adapter plate accepts standard guide bushings for template work, phosphorous bronze bushings provide a smooth and accurate plunge, micro-fine depth adjuster. Specs: no load speed 8,000-24,000RPM, 1/2", 1/4"  collet dia., 2-1/8" plunge stroke, depth stop 3 stage turret stop, base dimension 4-5/16 x 6-1/4", spindle lock, weighs 9lbs. Includes: 1/4" and 1/2" collets, template guide bushing adapter, wrench. Electronic five speed motor accommodates various router bit cutting diameters and applications, soft start feature reduces torque at star up and motor maintains constant speed under load, auto release collet system allows for easy bit removal after use, precision machined aluminum motor housing and base, base includes large integrated cast handles for stability and durability, dust sealed switch and sealed ball bearing construction. Specs: 120/AC, 60Hz, no load speed: soft starting 5 speed at 10,000, 13,000, 16,000, 19,000, and 21,000 RPM, 4.2" motor diameter, 1/2" collets, 7" round base, LxWxH (11"x7"x11") weighs 14.5lbs. Includes: router motor, fixed base, 1/2" collets, collet wrench, operating manual.
Fein Multimaster Multi-Tool Kit
Self-supporting motor with vibration decoupling for ideal vibration and noise reduction. Powerful 350 watt Fein high performance motor for optimal cutting speeds and maximum work progress. High quality and stability thanks to metal gear case and consistent use of ball or needle bearings. Lightweight tool at only 3.1 lbs. Tool cord length of 16.4'. Convenient Quick-In rapid-clamping system. Electronic speed control with generator for constant speed, even under load. Integrated interface for mounting additional accessories. Soft-grip zone provides optimal handling. Starlock tool mounting for ideal torque transfer. Kit includes: 1 Fein MultiMaster FMM 350QSL, 1 backing pad, 3 of each sanding sheets (grits 60, 80, 120 and 180 perforated), 6 sanding sheets 4-1/2" perforated (2 of each grits 60, 80 and 180), 1 dust extraction assembly, 1 rigid scraper blade, 1 E-Cut long life saw blade (35mm), 1 Universal E-Cut saw blade 1-3.4" (44mm) (type 152), 1 E-Cut long life saw blade (65 mm), 1 HSS segment saw blade, 1 carbide segment saw blade, 1 carbide rasp (triangular) and 1 hard tool case.
   
 
1