Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > CORDLESS IMPACT DRIVERS
Sort By:
1
DRILL HAMMER 1/2 INCH         Black & Decker BDCMTI Matrix Cordless Impact Driver Attachment Black & Decker BDCMTTS Matrix Trim Saw Attachment
Powerful 6.0 amp motor, variable speed (0-3300 rpm). Hammer: 0-43,500 BPM. Lock-On button for extended use. Die-cast aluminum gear housing. 360? assist handle. Includes: depth rod, auxiliary handle and chuck key. Ideal for driving screws,large fasteners such as lag bolts, decking and drilling/driving in tight areas. Impact attachment fits 20 volt Black & Decker cordless drill (Orgill sku 983.7014). Powerful performance for use on plywood, paneling and fence boards. Lightweight, compact design for comfort and control. Spindle lock button that allows for single wrench bit changes. Rpm (12v Max). (1) 3-3/8'' Carbide blade - 24T. Cutting capacity - 90 degrees, cut 0.8267''.
Skil 6445-01 Corded Hammer Drill Rockwell RC3136 Corded Hammer Drill DRIVER IMPACT 12V LITHIUM-ION
Variable speed trigger lets user control drilling speed, two finger trigger for increased control. Accepts large diameter bits designed for woodworking and cutting, side-assist handle for controlled, accurate drilling, horizontal bubble level for precise drilling and driving. Specs: no load BPM is 51,000, no load RPM is 3,000, 120V/50 -60 Hz. Includes hammer drill, chuck key side and assist handle. Features hammer function for drilling concrete and brick, magnesium gear housing for strength and prolonged life, keyed chuck secures the bit for heavy-duty use and soft grip handle. Specs: 120V/60Hz, 0-2800RPM no-load speed, 0-44800BPM impact rate, max drilling capacity in: wood- 1-1/4", masonry- 1/2", steel- 1/2" and weighs 5 lbs. Includes: 10 ft. cord, auxiliary handle, depth gauge and chuck key. 708 in-lbs of torque. Torque transfers to the work, not the user. 1/4" hex quick-change locking collet. More power and double the run time of Ni-Cad drivers. Battery holds its charge up to 18 months in storage. Built-in LED work light. Metal belt clip. Electric brake. 12 volt DC motor input. No load speed:0-2,300 rpm, reversible. Charger input: 120v - 60 Hz, with a charging time of 3-5 hrs. Includes (1) battery, charger and (1) #2 Phillips screwdriver bit.
DRILL ROTARY HAMMER 1/2IN 7A  Black & Decker DR670 Corded Hammer Drill SAW CIRCULAR 6-1/2IN LITH 20V
7.0 amp motor delivers the power and durability to complete the toughest drilling applications. 0-3100 rpm. Cast metal gear housing helps dissipate heat from internal components for additional durability. Hammer drill and drill modes provide versatility for drilling into metal, wood, concrete, brick, block and other masonry materials. Two finger locking trigger provides ease of use during extended use. Beats/Min: 52700 bpm. Side handle provides more control in heavy applications and bind up situations. Includes (1) side handle, (1) depth rod, (1) chuck and key holder. Weighs only 4.5 lbs. Variable speed/reversing switch, soft grip handle, reversing brush system and mid-handle design for balance and comfort, ROC hammer technology for high speed masonry drilling, hammer drill or drill mode for masonry, wood or steel drilling, two speed selector, metal gear housing, 360-degree side handle with depth rod. Specs: 0-1,000 and 0-3,000 RPM, 51,000 BPM, cutting capacity: steel- 1/2", 1-1/4 "- wood, 1/2" -concrete.  Includes:  (1) chuck key & holder, side handle, depth rod, kit box. High performance motor delivers 4,000 rpm's for aggressive cutting. 6-1/2" carbide tooth blade delivers a 2-1/8" cutting capacity for a variety of cutting applications. Beveling shoe pivots up to 50 degrees for non-traditional cutting applications. Contoured over molded handle optimized for increased comfort. Weighs only 6.5 lbs which helps reduce jobsite fatigue. 20 volt max system cordless platform. Battery And Charger Sold Separately.
WRENCH IMPACT KIT 1/2 INCH    Prograde Pro Corded Hammer Drill Hitachi FDV16VB2 Corded Hammer Drill
Quickly tighten and loosen large nuts, bolts and other fasteners. 1/2" square drive , 220 ft-lbs maximum torque. Die-cast aluminum gear housing for durability. Rocker style switch for one-handed operation. Rated power: 120 v; 60 Hz; 7.5 amp; no load speed: 0-2100 rpm. Impacts per minute: 0-2700 IPM. Includes: 4 sockets 11/16", 3/4", 13/16", 7/8" and heavy duty storage case. Compact and lightweight hammer drill with variable speed control dial, push button reverse switch, one-piece cylindrical housing and aluminum die-cast inner cover and gear cover, oversize trigger switch, elastomer, non-slip grip, removable side handle, 1-1/16" center height that allows better reach into narrow work spaces. Specs: rated power input-590W,0.80HP,  rated power output-310W, 0.42HP, max.power output- 650W, 0.88HP, no load speed 0-2,900/min, no load impact rate 0-46,400/BPM, 111.6in/lbs max. torque, capacity in: concrete-5/8", wood-1", steel 1/2", 10-19/32" long, weighs 3.7lbs. Includes: side handle, depth gauge, injection molded plastic case. Variable speed control dial located on trigger, push button reversing switch, impact to drilling switch, low noise cooling air-flow design, removable side handle, Ball and needle bearing construction for longer tool life, industrial grade keyed chuck, provides greater bit retention, elastomer, non-slip grip. Specs: straight shank, keyed 3-jaw chuck, impact rate is 0-46,400BPM, no load speed is 0-2900RPM, capacity in: concrete-5/8", wood-1", steel-1/2", 2 modes of operation, switch is EVS, reversible, 11-11/32 long, weighs 3.5lbs. Includes: side handle, depth gauge, chuck key, injection molded plastic case.
DRIVER IMPACT LITHIUM-ION 20V Dewalt DWE5010 Hammer Drills Dewalt DW255 Corded Screwdriver
Compact, lightweight and powerful. Incredible 1062 in-lbs of torque. More power and double the run time of Ni-Cad. Battery holds its charge up to 18 months in storage. 1/4" hex Quick-Change locking collet. Built-in LED work light. On-board battery power indicator. No load speed: 0-2200 rpm, reversible. Impacts per minute: 0-3800. Charger input: 120 v/60 Hz. Weighs only 2.5 lbs. Electric brake. Includes battery, charger and #2 Phillips Impact Driver Bit. Single speed hammer drill. 7.0 amp motor provides high performance and overload protection. Dual mode: hammer drill/drill for wood, steel or masonry applications. Lightweight design for extended use and less user fatigue weighs only 4.3 lbs. Two-finger, rubber trigger for user comfort. 360 degree side handle with depth rod offers greater control, versatility and increased depth accuracy. Variable speed allows for precise hole placement on work surface. Compact design (10.3" length) allows for comfortable use and easy access to tight spaces. Lock-on trigger gives the option to keep the drill running continuously when doing repetitive applications. Lightweight, variable speed reversing, with depth-sensitive nosepiece for consistent fastener depth, two finger, rubber trigger for increased comfort, hi-speed transmission for production drywall hanging, heat-treated steel gears for long life and durability, excellent ergonomics. Specs: No Load Speed 0-5,300RPM, standard clutch, 60 in/lbs max torque, max fastener size #8, weighs 2.9lbs.
Porter-Cable PC70THD Corded Hammer Drill Kit Milwaukee 6742-20 Standard Straight Corded Screwdriver Makita FS4200 Standard Corded Screwdriver
Dual speed transmissions provides maximum torque in setting one and maximum speed in setting two. Hammer drill and drill modes provides versatility for drilling into metal, wood, concrete, brick, block and many other materials. Cast metal gear housing helps dissipate heat from internal components for additional durability. Includes cast metal side handle, depth rod, chuck key and holder. Specs: 0-1,100 & 0-3,100 rpm, 52,700 bpm, 1/2" capacity in steel, 1-1/4" capacity in wood, 1/2" capacity in concrete, 6' power cord, variable-speed trigger, anti-slip comfort grip and 5.1 lbs weight. Variable speed control, ergonomic tactile grip and two finger trigger, ramp off depth locator for easy depth adjustments, all metal gear case and diaphragm, removable belt clip with bit storage, soft grip handle. Specs: 120AC, no loadRPM is 0-4,000, Snap-Action clutch, 1/4" hex drive, max HP  0.9, 10 ft. 2-wire rubber, fixed cord, double insulated, trigger lock, 0.92" spindle offset, 12-3/4" long, weighs 3.5lbs. U.L. Listed. Rental. Includes: belt clip. Large variable speed trigger with lock on button for continuous use, adjustable depth locator and LED light, cast aluminum gear housing,ergonomic grip and bit storage on base. Used in framing and hanging applications. Specs: 0-4,000 no load rpm, 11-1/8" long, weighs 2.9 lbs, 8' standard cord. Includes one each: #2 phillips insert bit and magnetic bit holder.
Milwaukee 2401-22 Compact Cordless Screwdriver Kit Dewalt DC825B Cordless Impact Driver Dewalt DW257 All-Purpose Standard Corded Screwdriver
Features variable speed trigger for output power control, quick bit-loading, battery fuel gauge displays remaining run-time, metal gear housing, built in led for illumination of dark work spots and over mold side and grip. Specs: 0-500 rpm no load speed, 175 in-lbs. torque, spindle lock, 14+1 clutch settings, capacity in: steel 1/4", wood 1/2" and weighs 2.0 lbs. Includes: (2) 12V Red Lithium battery packs, 12V charger, and compact driver storage bag. Compact size and weight allows access into tighter areas and perform a wide range of fastening applications, frameless motor, replaceable brushes, textured anti-slip comfort grip, durable magnesium gear case and all metal transmission, heavy duty impacting mechanism. Specs: 18V, 1/4" hex shank quick release, 111 in/lbs torque, 1,330 in/lbs torque, 0-2,400RPM/0-2,700IPM, 5-3/4" long, weighs 2.2 (tool only)lbs. Includes: tool only (batteries and charger sold separately). Variable speed reversing, two-finger, rubber trigger for increased comfort, heat-treated steel gears for long life and durability, high torque for deck building, drywall and heavy gauge steel stud framing, depth sensitive nosepiece for consistent fastener depth, excellent ergonomics. Specs: no load speed 0-2,500RPM ,standard clutch, 132 in/bs torque, max fastener size #12, weighs 3.5lbs.
Makita HP1641K Industrial Corded Hammer Drill Kit Hitachi WH10DFL2 Cordless Impact Driver Kit Bosch PS21-2A Compact Cordless Pocket Driver
Lightweight, all ball bearing construction for longer tool life with two modes of operation, hammering with rotation and rotation only, ergonomic handle with rubberized soft grip, extended service life of carbon brushes, recessed lock on button for continuous use. Specs: capacities in: concrete-5/8", steel 1/2", wood-1-3/16", no load RPM 0-2,800, BPM 0-44,800, 11-7/8" long, weighs 4.3lbs. Includes: side handle, depth gauge, keyless drill chuck, plastic case. Powered by Lithium-Ion battery for fade-free power. 955 in/lbs of driving torque for heavy applications like tightening carriage bolts, and sinking deck screws. Drills into wood, metal and concrete. Tightens and loosens small screws, tapping screws, bolts and nuts. Impressively lightweight at only 2.2 lbs and compact at less than 6" in length. Faster impact driving and no-load speed of up to 2,700 rpm and a 3,200 bpm impact rate. Optimized handle for a secure grip and ergonomic comfort in all hand sizes. Free-standing design allows drill to stand on its own when not in use. Balanced tool weight for proper wrist alignment and reduced fatigue. Charger circuitry prevents overheating and power loss. LED light effectively illuminates dark work areas. Quick change 1/4" hex chuck for simple bit replacements. Responsive variable speed trigger for precise control during operation. Kit includes: (2) 12 volt Peak Lithium-Ion batteries, (1) 12 volt Peak 25 minute quick charger, (1) No. 2 driver bit and (1) carrying case. Features a bright LED light. Includes 30 minute charger, (2) lithium-ion 12V max batteries and carrying case. Specs: 5.6" length, 0-350/0-1,300, 12V max rating, 265 in lbs torque and weighs 1.8 lbs.
Milwaukee 5376-20 Corded Hammer Drill Dewalt DC390B Cordless Circular Saw Dewalt DW272 Standard Corded Screwdriver
Equipped with a removable 360 degree side handle that also assists in setting the depth rod for pre-set hole drilling. Metal gear housing. 2-mode operation, hammer drill and drill only modes for concrete, wood, and metal. Over-mold increases grip and reduces user felt vibration. Specs: 0-2,800 no load rpm, 0-48,000 no load bpm, 1-1/4" wood capacity-hole saw, 1/2" metal capacity-twist bit, 5/8" concrete capacity, 8 ft fixed cord type, trigger lock, and weighs 4.9 lbs. Fan cooled motor with replaceable brushes, carbide tipped blade for 2X cutting capacity at 90 degrees and 45 degrees, high strength magnesium shoe and upper guard. Specs: no load speed 3,700RPM, bevel capacity 0-50 degrees, 5/8" arbor, depth of cut at: 45 degrees 1- 5/8", 90 degrees 2-1/4", weighs 6.3 lbs. Includes: carbide tipped blade, blade wrench, tool only (batteries and charger sold separately). Lightweight with variable speed reversing, excellent ergonomics, metal gear housing for jobsite durability and increased reliability, depth-sensitive nosepiece for consistent fastener depth, rubber grip and two-finger trigger for increased comfort and greater control, heat treated steel gears for long life and durability. Specs: no load speed 0-4,000RPM, standard clutch, 81 in/lbs max torque, max fastener size #8, weighs 3.1lbs.
Dewalt DW511 Corded Hammer Drill IMPACT DRIVER 20VLITH W/1-BATT Milwaukee 2630-20 M18 Cordless Circular Saws
Lightweight for extended use with variable speed, dual mode hammerdrill/drill for wood, steel or masonry applications, 360 degree side handle with depth rod, two-finger, rubber trigger. Specs: max watts out 650W, no load speed 0-2,700RPM, blows/Min 0-46,000BPM, capacity in: steel 1/2", wood 1-1/4", concrete optimum 5/32-3/8", 11-1/2" long, weighs 4.3lbs. Includes: side handle, depth rod, chuck key with holder. Compact and lightweight, yet fast and powerful. LED work light is ideal for dark and enclosed areas. Temperature overload function which shuts unit down automatically if it overheats. Reverse function. No load speed 2500 rpm. 6mm keyless chuck. Worx 20 volt lithium batteries fit a wide range of Worx cordless lawn and workshop tools. Charge time 3-5 hours. Weighs only 2.64 lbs. Heavy duty magnesium blade guard for maximum durability. Ergonomic, compact and lightweight design with soft grip handle for operator comfort. Max bevel capacity 50 degrees. Electronic brake stops blade quickly. Aircraft aluminum shoe provides greater accuracy. 1 hour charge time. Easy to read Aluminum aircraft shoe provides a light weight durable shoe and greater accuracy in rip cuts. 5/8" arbor size. Weighs only 8.5 lbs. Provides powerful lightweight cutting for a variety of applications including plumbing, electrical, framing, finishing and carpentry. Quickly and easily cuts tough material such as LVL headers. Includes: (1) M18 Cordless Lithium-Ion 6-1/2" Circular saw and (1) Circular saw blade.
DRILL HAMMER 2/SPD 8.5A 1/2IN Makita BSS611Z Tool Only Cordless Circular Saw Dewalt DCF885B Cordless Impact Driver
Features a muscular 8.5 amp motor that handles all masonry drilling applications, delivering a max of 51,000 BPM for muscles and durability. The tool's drilling capacities range from 3/4" for masonry applications to 1-1/2" for wood. The HG 18-2 features a torque control auxiliary handle, which locks into place; the handle has a built-in depth gauge. The dual mode selector easily converts from rotation only to hammer drill mode. A rotating brush plate allows users to easily back out bound-up bits. It has two speed settings, one for high speed and one for high torque. Because of its heavy duty three jaw 1/2" chuck, the tool has a high clamping force that prevents drill bits from slipping. This robust drill has a metal front housing for longer life, a pistol grip handle with soft-grip design and an integral slip clutch for security against recoil. Includes (1) 360? auxiliary handle and (1) depth gauge. Tool only. Heavy gauge, precision machined base for smooth, accurate cutting and added durability. Soft grip handle. Specs: 5/8" arbor, 3,700 RPM, Max cutting depth at: 90-degrees- 2-1/4", 45-degrees- 1-9/16" and 50-degrees- 1-7/16", uses 18V LXT lithium-ion battery (battery and charger not included) and weighs 7.3 lbs. Compact design fits into tight areas. Three LED lights with 20 second delay after trigger release, provide visibility without shadows.  One-handed loading hex chuck accepts 1" bit tips. Specs: 0-2,800 rpm no load speed, 0-3,200 ipm, 1,400 in-lbs/117 ft-lbs max torque and weighs 2 lbs. Includes tool only with belt hook.
Dewalt DCS391B Tool Only Cordless Circular Saw Milwaukee 0370-20 Right Angle Close Quarter Corded Drill DRIVER IMPACT CMPCT 1/4IN 20V
High strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy. Optimized rubber overmolded comfort grip delivers optimal balance and control. Specs: 3,700 rpm, 50-degree bevel capacity, 5/8" arbor size, 1-5/8" depth of cut at 45-degree, 2-1/4" depth of cut at 90-degree and weighs 7 lbs. Includes tool only with 6-1/2" carbide-tipped blade. Provides a unique chuck angle for reaching into tight areas. Large paddle trigger, textured grip with convenient forward/reverse lever. Angled cord exit keeps cord out of work area. Specs: 120 volts AC, 0-1,300rpm, 1/2in.-20 spindle, 3/8" metal twist bit capacity, double insulated construction, double gear train, 8 ft. fixed cord and weighs 3.9 lbs. Includes chuck key with holder. Compact (6.9" length) and lightweight at only 3.3 lbs. Allows the tool to work in tight areas and minimizes user fatigue. Quick release 1/4" hex head chuck for easy 1-handed bit changes. High torque motor delivers 1,450 in-lbs of torque. High performance motor (0-2,800 rpm and 0-3,100 ipm) for quick fastening applications. Battery user gauge displays remaining charge. LED light brightens dark work areas. Includes Impact driver, (2) Li-Ion batteries, (1) charger and (1) storage bag.
S-B PS11-102 Right Angle Cordless Drill/Driver Kit Dewalt DCD740B Right Angle Compact Cordless Drill/Driver Kit Dewalt DCF886B Cordless Impact Driver Kit
A 12 volt motor provides 1,300 rpm as well as 115 in-lbs. max torque. 5 position pivoting head articulates from 90 degrees to 180 degrees, making it ideal for working in tight areas and corners. 3/8" auto lock chuck for simple bit replacements and a variety of applications. Variable speed trigger for perfect speed regulation. Motor brake for exact serial screw driving. Kit also includes (1) high capacity battery, charger and soft case. Compact front to back length. Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger. Specs: 360UWO, 2 speed settings, 0-650/0-2,000, plastic ratcheting chuck and weighs 3 lbs. Includes tool only with belt hook and 2" Phillips tip bit. DeWalt brushless motor delivers more run time. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Tool Only, Battery Not Included.
Milwaukee 6790-20 Self Drill Corded Screwdriver Milwaukee M12 Cordless Impact Driver Kit IMPACT DRIVER BRSHLS 1/4IN 20V
Variable speed control, ergonomic tactile grip and two finger trigger for user comfort and balance, ramp off depth locator for easy depth adjustments, all metal gear case and diaphragm, removable belt clip with bit storage, used for controlled depth fastening. Specs: 120AC, no load RPM is 0-2,500, Snap-Action clutch, 1/4" hex drive, max HP is 0.9, double insulated, switch trigger type, trigger lock, soft grip handle, spindle offset  0.92 in., fixed 10 ft. 2-wire rubber cord, 12-1/8" long, weighs 3.7 lbs. UL listed. Includes: belt clip. Milwaukee impact mechanism delivers 1,000 in-lbs of torque. 0-2,500 rpm for increased fastening speed. New ergonomic handle design for increased comfort. On-board battery fuel gauge displays remaining run time. 6-1/2" length. Weighs only 2.3 lbs. Kit contains: (1) M12 1/4" Hex Impact driver, (2) M12 RedLithium battery, (1)M12 Lithium-Ion battery charger, (1) belt clip and (1) carrying case. Brushless motor provides 50 percent more run time. Powerful motor provides 1,400 in-lbs of torque for large fastening applications. Transmission provides 2,700 max rpm's for speed of fastening applications. 1/4" Quick change hex for one handed quick and easy bit changes. Lithium Ion battery. Tool weighs 2.9 lbs. Tool length: 5.8".
Dewalt DW505 Corded Hammer Drill Milwaukee 5378-21 Corded Hammer Drill Kit Senco 7T0001N Auto-Feed Corded Screwdriver
High/low gear for high speed drilling, or high toque applications. Dual mode for hammerdrill/drill used  in wood, steel or masonry applications. Features two finger, rubber trigger. Specs: 6500W max watts out, 0-1,200/0-2,700rpm no load speed, 0-19,000/0-46,000bpm, capacity in: optimum- 5/32- 3/8", steel- 1-1/2", wood- 1/2" and weighs 4.8lbs. Includes 360-degree locking side handle, steel depth rod, chuck key with holder and kit box. Features variable speed, reversing, two mode selection for hammer with rotation or rotation only, synchronized gear shift, ergonomic soft grip handle, two finger trigger switch, self stop brush system. Specs: 120 AC, 0-1,350/0-2,500rpm no load, 0-20,000/0-40,000 bpm, capacities in: wood- 3-3/4", metal-twist bit- 1/2", concrete- 3/4", self-feed bit- 1-3/4", 10 ft. fixed cord, trigger lock and weighs 6.0 lbs. Includes side handle, depth gauge, chuck key and impact resistant carrying case. 2" corded 5000 rpm auto-feed screwdriver with AC motor. Corner fit feed system. Tool-free screw length adjustment. Precise depth of drive adjustment with depth lock. Quick slide button bit change. Variable speed trigger with lock and reverse. Belt hook right or left handed adjustable. Includes (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag and (1) Phillips bit.
DRIVER IMPACT MODE 3-SPEED 18V Hitachi WH18DGL Cordless Impact Driver Kit Milwaukee 5378-20 Corded Hammer Drill
Powerful 1,280 in/lbs of turning torque to handle tough jobs in tight spaces. Powered by Lithium-Ion battery for less weight and fade-free power. Up to 2,400 rpm and 3,200 bpm for maximum driving speed and fastening capabilities. Lightweight design at only 3.1 lbs reduce fatigue during extended or elevated use. LED light effectively illuminates dark work spaces. 1/4" quick-change chuck for quick and simple bit replacements. Responsive variable speed trigger provides complete control during operation. Kit includes: (2) 18 volt Lithium-Ion batteries, (1) 18 volt 35 minute charger, (1) 18 volt Impact driver and (1) carrying case. Features variable speed, reversing with dual range speed control, hammer with rotation or rotation only, removable side handle and self-stop brush system. Specs: 120 AC, 0-1,350/0-2,500rpm no load, 0-20,000/0-40,000 bpm  no load, capacities in: concrete- 3/4", metal/twist bit- 1/2", wood- 3-3/4", self-feed bit capacity- 1-3/4", 10ft. fixed cord, trigger lock and weighs 6.0lbs. Includes side handle, depth gauge and chuck key.
Dewalt DCF815S2 Cordless Impact Driver Kit DRIVER HYDRAULIC 1/4IN HEX    Makita HP2050F Corded Hammer Drill
DRIVER HYDRAULIC 1/4IN HEX
Our Price: $145.54
Compact and lightweight with a slim handle and contoured grip, three LED lights that provide visibility without shadows in work areas, a battery that has been placed at the bottom of the handle that allows the tool to stand up between uses. Specs: 950 inch/pounds of torque, 1/4-inch hex chuck that allows users to push the bit in with one hand to lock it in place and accepts 1-inch bit tips and weighs two pounds. Includes one impact driver, two 12 Volt Max Lithium Ion battery packs, one belt clip, one 40 minute, charger, one bit tip, one belt hook and a contractor bag. Brushless motor provides more power, more run-time, and longer life. Electronic Intelligence enables advanced communication between the batteries and tool, allowing for unmatched levels of performance, protection, and productivity. Features SURGE Hydraulic Driver technology and LED light. Weight: 2.3 lbs. Includes: M18 FUEL SURGE 1/4" Hex Hydraulic Driver, Belt Clip and Bit Holder. Drill has variable speed, reversing, built in LED light illuminates drilling edge and increases visibility with a bulb that never needs replacing, two modes, hammering with rotation and rotation only, positive stop mode selector prevents accidental mode disengagement, built in torque limiter, large trigger switch and 360 degree swivel side handle, recessed lock-on button, ball bearing construction, ergonomic shape with rubberized grip, air vent holes supply required ventilation. Specs: capacities in: concrete-3/4", steel (low) 1/2" (high) 5/16", wood-1-9/16", no load RPM (low) 0-1,200 (high) 0-2,900, BPM (low) 0-24,000 (high) 0-58,000, 14-1/4' long, weighs 5.6lbs. Includes: side handle, depth gauge, chuck key, tool case.
Senco 7U0001N Auto-Feed Corded Screwdriver Porter-Cable PCCK640LB Cordless Impact Driver Kit M12 2415-21 Right Angle Cordless Drill/Driver Kit
2" corded 2500 rpm high torque AC motor. Drives: screw diameters #6 - #12, screw lengths: 1" - 2". Variable speed trigger with reverse. Corner access feed system. Tool-free screw length adjustment. Precise depth of adjustment with depth lock. Slide button bit change. Belt hook right or left handed adjustable. Includes: (1) Drywall nosepiece, (1) wood nosepiece, (1) storage bag, (1) square bit and (1) Phillips bit. High torque motor delivers 1,495 in/lbs of torque. High performance transmission (0-2,900 rpm, 0-3,100 bpm) for quick fastening applications. Compact tool (6.2" in length, 3.2 lbs) easily fits in tight spaces and reduces fatigue. Easy load chuck allows user to insert bit with one hand. Battery fuel gauge displays charge remaining in the battery. LED work light provides additional light in dark work areas. 20V Max Lithium Ion batteries with 1.5 amp/hour cells delivers more power and run time in a smaller package. Kit contains: (1) Lithium Ion Impact driver, (2) Lithium Ion compact batteries, (1)Lithium Ion charger, kit box and No. 2 PH Screwdriving bit. Built in electronics include variable speed control, an electronic clutch, 11 settings plus drill mode, fuel gauge,and overload protection, single sleeve ratcheting chuck, extended paddle switch, LED's illuminates work surface. Specs: 12V. no load speed is 800RPM, 100 in/lbs torque, head length is 3-3/4", single sleeve, ratcheting, Lituium-Ion battery, 11.75" long, weighs 2.43lbs. Includes: (1) M12 Red Lithium battery, (1) 30-minute charger, (1) carrying case.
Dewalt DW160V Right Angle Corded Drill Milwaukee M12 Cordless Impact Driver Kit ANGLE DRILL CORDLESS 18V 3/8IN
Compact for easy access in tight places with variable speed reversing, paddle switch, shielded chuck, 100 percent ball bearing construction, double gear reduction increases torque performance, decreases gear stress, pistol grip handle. Specs: no load speed 0-1,200RPM, max watts out 200W, capacity in: wood (spade bit)-1-1/8", wood (hole saw)-1-1/8", steel (twist bit)-3/8", (hole saw)-3/4", gear reduction double , anti-slip grip, anti-lock control, spindle lock , weighs 3.75lbs. Includes: chuck key with holder. Hex impact driver kit delivers maximum performance in a compact size. Provides extended motor life, more runtime and proprietary drive control. Brushless motor with constant power output, yet runs cooler with no wearable components. Red Lithium 2.0 compact battery pack. M12 Fuel impact driver offers fastening speed. Compact weight and size allow access to tighter areas and reduce user fatigue. The built-in LED light illuminates work surfaces in dark work spots. Includes a 12 volt lithium-ion battery charger. Kit includes (1) M12 Fuel 1/4" hex impact driver (2453-20), (2) M12 Redlithium 2.0 compact battery pack (48-11-2420), (1) M12 Lithium-ion battery charger (48-59-2401), (1) belt clip and (1) carrying case.
Senco 7V0001N Auto-Feed Corded Screwdriver Dewalt DWD520K Corded Hammer Drill Kit Makita HR2475 Corded Rotary Hammer Drill
2" corded 2500 rpm high torque AC motor. Corner fit feed system. Variable speed trigger with lock and reverse. Tool-free screw length adjustment. Sliding screw guide. Precise depth of drive adjustment with depth lock. Quick slide button bit change. Belt hook right or left handed adjustable. Includes (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag, (1) square bit and (1) Phillips bit. Generates 50 percent more power with increased overload protection for added durability. Dual mode for versatility in masonry, wood, or steel drilling applications. Features two speed range, high speed or high torque, soft grip handle, two finger trigger and metal gear housing. Specs: 980W max watt out, 0-1,200/0-3,500rpm no load speed, 0-56,000bpm, capacity in: steel- 1/2", wood- 1-1/2", concrete optimum 5/32-7/16", 14" long and weighs 6.0lbs. Includes 360 locking side handle, steel depth rod, chuck key with holder and kit box. Variable speed with 3-Mode operation rotation only, hammering with rotation and hammering only, ergonomic D-shaped handle with rubberized soft grip, accepts SDS-PLUS bits, one touch sliding chuck, built-in torque limiter, 'No hammering when idling' function, extended service life of carbon brushes, recessed lock on button, 40 different bit angle settings. Specs: 7AMP, impact energy is 2.7 ft./lbs., no load BPM is 0-4,500, no load RPM is 0-1,100, capacity in: concrete 1", steel-1/2", wood-1-1/4", 16-7/8" long, weighs 6.6lbs. Includes: (1) rotary hammer, (1) 360 degree auxiliary handle, (1) depth gauge, (1) carrying case. Includes: (1) rotary hammer, (1) auxiliary handle, (1) depth gauge, (1) plastic tool case.
DRIVER IMPCT BRSHLS SB-CPT 18V DRIVER IMPACT COMPACT 18V     Bosch HD21-2 Duel Corded Hammer Drill
DRIVER IMPACT COMPACT 18V
Our Price: $179.48
Sub-Compact Brushless Cordless Impact Driver is a fastening solution with superior comfort and handling and is part of a class of compact tools, with the size and weight of lower voltage tools but with the performance, power and compatibility of 18 volt. Efficient brushless motor with two speed settings and dual L.E.D. lights illuminate the work area. Innovative Assist Mode (A-mode) helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins, and is ideal for driving longer fasteners. Ergonomically designed handle with rubberized soft grip provides increased comfort. Specs: 1/4" Hex shank, 0-1,300/0-3,000 RPM, 0-1,600/0-3,900 IPM, 1,240 in. lbs. maximum torque. 5-5/16" length, and 2.6 lbs. weight. The Kit Includes: 18 volt 1/4" Brushless Impact Driver, 18 volt LXT battery, 18 volt charger, and 14" Contractor Tool bag. Makita 4-pole motor with 4 brush design delivers more rpm without decreasing torque. Variable speed (0-2,900 rpm and 0-3,500 ipm) and 1,460 in lbs. of torque for a wide range of fastening applications. All metal gear housing for increased job site durability. Compact and ergonomic design at only 5-3/8" long. Weighs only 2.8 lbs. with battery for reduced operator fatigue. Convenient one-touch 1/4" hex chuck for quick bit changes. Ergonomically designed handle with rubberized soft grip provides increased comfort. Dual L.E.D. lights with afterglow illuminate the work area. Makita's proprietary hammer and anvil impact mechanism is manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power. Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions. 18V compact Lithium-Ion 2.0 Ah battery 1820B, features and integrated L.E.D. battery charge level indicator, provides up to 50 percent more run time per charge, reaches full charge in 25 minutes or less and is compatible with 18V LXT tools. Equipped with Star Protection computer controls to protect against overloading, over-discharging and overheating. Rapid Optimum charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. The charger has a built-in fan to cool the battery for faster more efficient charging. Kit Includes: (2) 18 volt LXT Lithium-Ion compact 2.0 AH batteries, (1) 18 volt Lithium-Ion Rapid Optimum charger and (1) tool case. Dual-mode selector converts from rotation only to hammer drill mode. Ergonomic pistol-grip handle. Integral slip clutch helps minimize torque reaction. Features rotating brush plate, metal gear housing and 2 speeds. Specs: 3-jaw chuck, max hole in: concrete- 7/8", wood- 1-5/8", metal- 5/8", 0-900/0-3000 no load rpm, 0-18000/0-54000 no load bpm, 13.5" long and weighs 10.9 lbs. Includes 360-degree auxiliary handle, depth gauge and carrying case.
Dewalt DW293 Corded Impact Wrench Milwaukee 5262-21 Corded Rotary Hammer Kit Dewalt DW292 Corded Impact Wrench
Ball bearing construction for increased durability with variable speed reversing,  AC/DC forward/reverse rocking switch, oft grip handle. Specs: no load speed 2,100RPM, 345 ft/lbs max torque , impacts/min 2,700IPM, 11-1/4" long,  weighs 7.0lbs. Meets OSHA Standards. U. L. Listed. Features a lightweight design to provide ease of use and reduce user fatigue. Mechanical clutch protects tool when bit binds up. 3-mode operation: rotary hammer, hammer only and rotation only. Variable position chisel stop allows steel to be adjusted for work in any orientation. Specs:1.8 ft-lbs impact energy, 0-1,500 no load rpm, 0-5625 no load bpm, 10 ft cord length, double insulated, D-handle style, 2-1/2" thin wall core bit capacity, and weighs 5.8 lbs. Ball bearing construction for increased durability with variable speed reversing,  AC/DC forward/reverse rocking switch, oft grip handle. Specs: no load speed 2,100RPM, 345 ft/lbs max torque , impacts/min 2,700IPM, 11-1/4" long,  weighs 7.0lbs. Meets OSHA Standards. U. L. Listed.
Dewalt DCF885C2 Cordless Impact Driver Kit DRILL HAMMER SDS1IN PISTOL GRP DRILL HAMMER 1IN SDS ROTARY
Compact (5.5" front to back), light weight design fits into tight areas. Three LED lights with 20 second delay after trigger release, provide visibility without shadows. One-handed loading 1/4 hex chuck accepts 1" bit tips. Spec: 1/4in drive size, 2800rpm no load speed, 3200ipm, 1400in-lbs max torque, 117ft-lbs max torque. Includes (2) 20v Max lithium ion 1.5 Ah battery packs, 30 minute fast charger, belt hook and kit box. Pistol grip hammer drill. 2.6 Joules of impact energy for fast drilling and chipping speed. 8.0 amp high performance motor. Rotating brush ring delivers full speed/torque in forward and reverse. Integral clutch reduces sudden, high torque reactions if bit jams. No load speed: 0-1500 rpm. Variable speed switch. Tool length: 13.25"; Tool weight: 5.8 lbs. Kit includes 360 degree side handle, depth rod and kit box. 2.8 joules of impact energy for fast drilling and chipping speed. Shocks - active vibration control, reduced vibration felt in the handles. 8.0 amp high performance motor. Rotating brush ring delivers full speed/torque in forward and reverse. Integral clutch reduces sudden, high torque reactions if bit jams. Variable speed switch. No load speed 0-1500 rpm. Tool length: 16.75"; Tool weight: 6.6 lbs. Includes 360 degree side handle, depth rod and kit box.
Makita HP2070F Corded Hammer Drill DRIVER IMPACT CRDLS/BRSHLS 18V Milwaukee 9072-20 Corded Impact Wrench
Drill has variable speed, conveniently located reverse slide switch, built in LED light illuminates drilling edge and increases visibility with a bulb that never needs replacing, two modes, hammering with rotation and rotation only, positive stop mode selector prevents accidental mode disengagement, built in torque limiter, large trigger switch and 360 degree swivel side handle, recessed lock-on button, ball bearing construction, ergonomic shape with rubberized grip, air vent holes supply required ventilation. Specs: capacities in: concrete-3/4", steel (low) 5/8" (high) 5/16", wood (low)-1-9/16" (high) 1", no load RPM (low) 0-1,200 (high) 0-2,900, BPM (low) 0-24,000 (high) 0-58,000, 14-1/4' long, weighs 5.6lbs. Includes: side handle, depth gauge, chuck key, tool case. Pin-detent system to securely retain sockets or adapters, and AC-only variable speed reversing switch with speed setting dial, ergonomically shaped handle with a soft cushioned grip, light weight. Specs: 120AC, anvil  1/2" pin detent, 300 ft/lbs  peak torque, no load RPM is 600-1,800, no load IMP is 1,000-2,600, trigger  switch, soft grip, socket retention  flat end detent pin, 10 ft. Quik-Lok2-wire cord, 11-5/8? long, weighs 6.0lbs. Includes: carrying case.
Dewalt DW268 Corded Screwdriver Dewalt DCD740C1 Right Angle Compact Cordless Drill/Driver Kit Milwaukee 5387-22 Corded Hammer Drill Kit
High power motor for metal fastening applications. Helical-cut steel, heat-treated gears for smooth operation and longer life. Rubber-grip and two-finger trigger for increased comfort. Versa-clutch torque adjustment system to dial the proper torque needed to efficiently drive fasteners without stripping or breaking fastener. High power motor for increased durability and longer life. Metal nose and gear case for durability on the job. Designed for steel stud framing, general framing decking/phillips screws and self-drilling hex head screws. SPECIFICATIONS: 6.5 amp motor, 0-2,500 RPM, 132 in. lbs. torque, #14 max. fastener. 3.2 lbs. tool weight. Dual speed ranges for increased user flexibility providing a wide range of applications. Compact front to back length allowing users to fit into hard to reach spaces. Multi-grip trigger provides comfort and convenience. Spec: 360 UWO, 2 speed settings, 0-650/0-2000 rpm, 3/8" plastic ratcheting chuck. Includes 20V max 1.5 Ah compact li-ion battery, 30 minute fast charger, belt hook, 2" phillips tip bit and kit box. Motor provides overload protection. Metal gear case can withstand daily jobsite abuse. Lightweight balanced design reduces operator fatigue. Dual speed motor optimized for concrete fastening. Specs: 120 AC, 0-16,000/0-40,000 bpm no load, 0-1,000/0-2,500 rpm no load speed, capacity in: steel- 1/2", concrete- 3/4", 10 ft. Quik-Lok cord, and weighs 6.4 lbs. Includes side handle, depth gauge, chuck key and carrying case.
Dewalt DCF886D2 Brushless Cordless Impact Driver Kit Bosch 25618-02 Cordless Impact Driver Kit SAW CIRCULAR 60V MAX 7-1/4IN
DeWalt brushless motor delivers more run time. XR Li-Ion batteries with fuel gauge provides more capacity. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back), lightweight (2.9 lbs) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Belt hook included for portability. Variable speed trigger, 1/4" hex drive with Quick Release, high performance motor and all metal gears, hammer and anvil system, increased maneuverability in tight spaces and extended comfort, built-in LED light, spring loaded impact mechanism that reduces user fatigue, externally accessible brushes. Specs: 18V, 1/4" hex drive, impact rate is 0-3,200, no load speed is 0-2,800RPM/3200BPM, 1,500 in/lbs max torque, 5.7" long, weighs 3.3lbs. Includes: (2) 18V, Litheon slimpack batteries, (1) 60-minute Litheon battery charger, (1) double-ended Phillips bit , (1) belt clip, (1) carrying case. Delivers the power of a corded saw with the portability and convenience of cordless through Dewalt's revolutionary FlexVolt technology. Delivers up to 339 cuts per charge in 2" x 4' SPF lumber. Electronic brake stops the blade after the trigger is released. 2-9/16" depth of cut. Brushless motor maximized for run time and durability. 5800 rpm optimized speed for quality cuts with speed. 7-1/4" blade diameter. Includes the Circular Saw, blade and blade change wrench. (Battery, Charger And 120 Volt Adapter Not Included).
Bosch 11255VSR Bulldog Rotary Hammer Drills DRIVER IMPCT KIT HEX 1/4IN 18V Senco 6Y0011N Auto Feed Collated Corded Screwdriver
HammerHook allows quick tool storage during the job. 0-1,300 rpm; 0-5,800 bpm. Multi-function selector provides 3 modes of operation: rotation only, rotary hammer and hammer-only mode. Vario-Lock positioning rotates and locks chisel into 36 different positions to optimize working angle. Rotating brush plate provides equal power in forward and reverse. Cord Turret 35" pivot for added flexibility and longer cord life. SDS-plus bit system tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. D-handle design is ideal for overhead and downward drilling applications. Variable speed reversing trigger for accurate bit starting as well as removing fasteners or bound bits. Integral clutch helps minimize torque reaction. Brushless motor optimized for efficiency, longer run-time and longer tool life. Delivers 1,500 in-lbs of torque and 0-2,800 rpm for a wide range of fastening applications. Compact design provides ideal balance and control. Also ideal for overhead applications or work in tight spaces. RedLink intelligence provides advanced overload protection against abusive applications and monitors the temperature to prevent damage and ensure maximum tool and battery life. RedLithium battery pack delivers more work per charge and more work over battery pack life. Weighs only 3.1 lbs. On board fuel gauge on battery. 5-3/8" tool length. Kit includes (1) M18 1/4" Hex brushless impact driver, (2) M18 RedLithium 2.0 compact battery packs, (1) M18 and M12 Multi-voltage charger and (1) carrying case. For sheathing, subflooring, underlayment, cement board, fencing, and wood or composite decking. Drives screws from 5/8" to 3" in lengths. Use stand-up mode for horizontal surfaces or hand-held for vertical surfaces. "Feed-on-return" functionality. Use screw gun with or without extension or drive loose screws with nose cone. Fast depth-of-drive adjustment. Includes auto-feed attachment, extension pole (for standing applications), adjustable handle, toe-nail nose piece (installed), no-mar nose piece, #2 Phillips, #2 square bits, rex drive bits and  nylon storage bag. Specs: 4000 RPM.
IMPACT DRIVER 1/4IN 20V       Makita TW0350 Corded Impact Wrench Milwaukee M18 Cordless Impact Driver Kit
IMPACT DRIVER 1/4IN 20V
Our Price: $220.53
Pairing the tool with the Tool Connect app enables you to access the last seen location of the device and diagnostics. Brushless motor delivers up to 75 percent more runtime vs. 18V NiCad brushed motors. Includes a Dewalt Home mode and 3 programmable modes to customize speed and light brightness. Specs: 1/4" Quick Release Hex Shank, 3,250 RPM, 4 speed settings, 1,825 In.-Lbs. max torque, 5.3" length, 2.8 Lbs. weight. Includes: DCF888 Too Connect Impact Driver, (2) Brushless Lithium Ion batteries, charger, and kit box. Greater impact power for framework, curtain walling or structural steel framing with 47 percent larger, more efficient hammer, rocker switch provides easy forward and reversing. Specs: capacities: standard bolt M12-M22, high tensile bolt M12-M16, square drive 12.7mm, impacts/minute is 2,000IPM, continuous rating input is 400W, no load speed is 2,000RPM, max. fastening torque 350Nm, weighs 2.9kg, 2m power supply cord, carbon brush. Included: standard-socket, carry case. Milwaukee 4-pole frameless motor. Features a robust design for longer life, more power and more run time. Delivers maximum power and application speed for greater efficiency on the job. RedLink intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. Proprietary 2-mode drive control. Two speed/torque modes. 1/4" hex quick connect chuck. Red Lithium battery delivers more work per charge. Delivers up to 2,750 rpm, 3,450 ipm and 1,500 in-lbs of fastening torque for ideal performance. LED light to illuminate work surfaces and includes an all metal, reversible belt clip for temporary tool storage. 5-1/2" length and weighs only 3.1 lbs. Charge time 30 minutes. Kit includes (1) M18 2-speed 1/4" hex impact driver, (2) M18 Red Lithium compact batteries, (1) M18 & M12 Multi-voltage charger, (1) belt clip and carrying case.
Makita DA3010F Right Angle Corded Drill Senco 6Y0012N Auto Feed Collated Corded Screwdriver Milwaukee 2653-22CT Cordless Impact Driver Kit
Compact, easy use between framing studs or any other close quarter application with variable speed for controlled drilling in wood/metal and speedy fastening, built in shock proof, high output, white LED light illuminates drilling area with a bulb that never needs replacing throughout the life of the tool, paddle switch with speed limiting dial, reduced head height, ball bearing construction. Specs: capacity in: wood-13/16", steel-3/8", no load RPM is 0-2,400, 10-5/8" long, weighs 3.1lbs. Includes: grip complete, chuck key, key holder. Drives flexible strips of 50 screws from a standing position, or remove the extension for close-up work. Capable of working with or without the extension pole. Easy depth-of-drive screw adjustment. Quick release for easy bit access. Flooring extension snaps on and off. Kit includes: 2,500 rpm screwdriver, 1/2"-3" auto-feed attachment, 21" extension pole, nylon storage bag, adjustable handle. "No-mar" nose piece, #2 Phillips, #2 square, and hex drive bit (specialized head configuration). Weighs 7.0 lb with extension and 5.5 lb without extension. Features a Powerstate Brushless motor. Redlink Plus allows operator to choose between 3 fastening modes: Mode #1 for precision work (0-850 RPM, 200 in-lbs of torque), Mode #2 helps prevent damage to fasteners and material (0-2,100 RPM, 700 in-lbs of torque) and Mode #3 delivers maximum performance for the toughness application (0-2,900 RPM, 1600 in-lbs of torque). Specs: 1600 in-lbs peak torque, 0-2,900 max rmp, 0-3,600 max ipm, M18 and M12 multi-voltage charger, fuel gauge on battery, LED light and weighs 3.0 lbs with battery. Includes two M18 Redlithium compact capacity battery packs, 30-minute multi-voltage charger, belt clip and carrying case.
Milwaukee 2615-21CT Right Angle Cordless Drill Kit Makita HP2010N Corded Hammer Drill Duraspin 7X0001N Auto-Feed Cordless Screwdriver
Features 3.75" head length, electronic clutch with 11 settings plus drill mode for complete control in fastening applications, extended multi-position handle and built in LED's. SPEC: 0-1500 no load speed, 100 in-lbs torque, multi-position trigger, 30 min charge time and weighs 3.7 lbs. Includes M18 Compact Red Lithium battery pack, 30 minute charger and carrying case. Variable speed switch, 2-speed gear change, depth gauge, all ball and needle bearings for long tool life, adjustable side handle, double insulated. Specs: capacity in: concrete-(high) 1/2" (low)-3/4", steel-(high) 1/4"  (low)-1/2" , wood-(high)-3/4" (low)-1-1/2", no load RPM (high) 0-2,300 (low) 0-900, BPM (high) 0-46,000 (low) 0-18,000, 13-3/4" long, weighs 6.4lbs. Includes: drill chuck, chuck key, side handle, depth gauge, steel tool case. 2500 rpm high-torque motor. Corner-fit feed system. Tool-free screw length adjustment. Precise depth of drive adjustment with depth lock. Quick slide button bit change. Variable speed trigger with lock and reverse. Belt hook right or left handed adjustable. Includes (2) 18 volt Li-Ion batteries, (1) charger, (1) drywall nosepiece, (1) storage bag and (2) drive bits.
Milwaukee 3107-6 Right Angle Corded Drill Kit DRILL STUD/JOIST 60V MAX BARE Dewalt DW120K Right Angle Corded Drill Kit
D-handle right angle drill kit with a powerful 7 amp motor. Delivers trigger speed control in two ranges: 0-335/0-750 rpm plus reverse. Torque offers 1/2" capacity in steel. Heavy duty 1/2" keyed chuck with holder provides an industrial hold during drilling and fastening. Versatile: handles up to a 4-5/8" Self feed bit. Quik-Lok 8 ft 3-wire grounded rubber cord provides easy storage and field replacement. Weighs 10.3 lbs. 120V AC. No load rpm 0-500. This kit includes: (1) 1/2" D-Handle right angle drill, (1) 3/16" socket wrench, (1) 9/16" open end wrench, (1) RAD assembly and (1) side handle. The Dewalt 60 Volt Max VSR stud and Joist Drill with E-Clutch system features a 1/2" chuck and brushless motor that provides corded power in a cordless solution. Ideal for plumbers, electricians and HVAC installers who need to drill large diameter holes in wood. This drill provides exceptional power, control, durability and run time with its 60 volt brushless motor, E-Clutch system, mechanical clutch and 2 variable speed ranges. Equipped with the innovative bind up control feature called E-Clutch system this drill increases user control in bind-up/stall situations by sensing a stall during use and managing torque accordingly. Adjustable handle and 2 position side handle for leverage and control. 2 variable speed ranges (0-300/ 0-1250 rpm) to match appropriate speed to the application. E-Clutch is a Perform and Protect feature that detects reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained. Tool length 6.83"; Tool length 16". Designed to provide a high level of one or more of the following; control, dust containment, or low vibration without sacrificing performance. Includes the Cordless Stud and Joist Drill, Chuck key and holder, 2 position side handle and adjustable bail handle. Three speed ranges offer versatility of matching the appropriate speed to the application, right angle drilling and straight drilling, die cast metal gear housing, 5-position side handle, 360 degree right angle attachment, triple gear reduction provides increased torque and reduces gear stress, double insulated, meets OSHA Standards, U. L. Listed. Specs: no load speed is 400/600/900RPM, max watts out is 580W, capacity in: wood (spade bit)-1-1/2", (self-feed)-2-9/16", (hole saw)-4", Wood (auger bit)-1-1/2", in metal: (twist bit)-1/2",  (hole saw)-5", triple gear reduction, weighs 9.75lbs. Includes: chuck key with holder, 5-position side handle, Allen wrench, kit box.
SAW CIRC BRUSHLESS 20V 7-1/4IN Bosch RH328VC Corded Rotary Hammer SAW KIT BRSHLS CIRC 7-1/4IN
7-1/4" (184mm) 20 volt circular saw with brake kit provides the power and depth of cut delivered by corded circular saws with the portability and convenience of cordless. Brushless motor provides 5200 rpm and maintains speed under load. Blade provides 2-9/16" depth of cut. Run-time: 330 cross cuts in a 2x4 (pine). Kit includes: 7-1/4" (184mm) circular saw, (1) 7-1/4" blade, (1) blade changing wrench, (1) 20 volt Lithium Ion battery and (1) 12 volt Max 20 volt Max Lithium Ion battery charger. Variable speed 3 finger trigger, SDS-Plus tool-free bit changes, 3 modes of operation, rotation only, rotary hammer and hammer only mode, vario-lock positioning rotates and locks chisel into 36 different positions, padded rear handle, 360 degree auxiliary handle with built-in depth gauge, integral clutch, double insulated, UL listed, complies to OSHA. Specs: 120V, impact energy is  2.6 ft./lbs., optimal concrete capacity range: 1/4"-7/8",max. hole diameter in: concrete-1-1/8", concrete-thin wall core bit-3", steel-1/2", wood-1-1/4", no load BPM 0-3,900, no load RPM 0-850 ,  weighs 9.3lbs., 12' cord, 15-1/4" long. Includes: (1) rotary hammer, (1) auxiliary handle, (1) depth gauge, (1) carrying case
DRIVER IMPACT SCKT RDY W/2BATT Dewalt DCF886M2 Cordless Impact Driver Kit SAW CIRC 60V BRSHLS 7-1/4 1BAT
The 18 V EC Brushless 1/4" and 1/2" socket ready impact driver delivers result, with the socket ready adapter that has a 1/4" hex and 1/2" square drive in one tool. Performance control system provides three speed and torque settings for maximum effectiveness. The tool is powered by a hassle free EC brushless motor. The hammer and anvil system that delivers maximum impact endurance, and the tool provides superior ergonomics, with the smallest grip diameter in the class. The impact driver kit includes (1) 18 volt EC brushless 1/4" and 1/2" Socket Ready Impact Driver, (2) 18 volt Lithium Ion long lasting 4.0Ah FatPack batteries, (1) 18 volt charger, (1) double ended bit, (1) belt clip and (1) soft bag. DeWalt brushless motor delivers more run time. XR Lithium-Ion batteries (2) with fuel gauge provides more capacity. Charger included; 45 minute charge time. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back), lightweight (3.4 lbs) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Belt hook included for portability. 15 Amp circular saw with brake is maximized for run-time and durability. It delivers the power and cut capacity of a corded circular saw with the portability and convenience of a cordless saw. Delivers up to 339 cuts per charge in 2" x 4" SPF lumber. Depth of cut 2-9/16". The electronic brake stops the blade after the trigger is released. 5800 rpm. The saw weighs 7.6 lbs.  Includes: (1) DCS575 7-1/4" (184mm) Circular saw, (1) 60 volt Max Lithium Ion battery pack, (1) Fast Charger, (1) Dewalt 7-1/4" (184mm) diameter blade and (1) Blade wrench and bag.
Dewalt DCF885M2 Cordless Impact Driver Kit Hitachi WH18DSDL Brushless Cordless Impact Driver Kit Hole-Hawg 1675-6 Right Angle Corded Drill
XR Li-Ion batteries with fuel gauge provides more capacity. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back), lightweight (3.4 lbs) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Belt hook included for portability. Lithium Ion slide-type battery technology for fade free power, less weight and longer battery life. Industrial grade 2-piece motor with up to 1,510 in-lbs of torque to handle the toughest jobs. 1/4 inch Hex quick-change chuck for quick and easy bit replacement. Two-step power switch to alternate between full power and power saving modes. Metal belt hook keeps the tool close at hand. Bright LED light for increases visibility in enclosed work spaces. Externally accessible carbon brush for quick and easy maintenance. Lightweight at only 3.7 lbs. Cross compatible with all other Hitachi slide type 18 volt battery systems. Includes: (2) Lithium Ion 3.0 Ah slide type batteries (330067), (1) rapid Lithium Ion slide battery charger (UC18YRSL) and (1) carrying case (323230). Powerful, yet compact for large hole drilling between joists and studs, two speed ranges increase the versatility of this drill, hi-torque and hi-speed for the heavy duty user with an extra long pipe handle that helps you control the power. Specs: 120AC, no load RPM is 300/1,200, capacity in: wood-(auger bit)-1-1/2", (self-feed bit)-4-5/8", metal (twist bit)-1/2", spindles 5/8"-16, triple gear train, 8 ft. fixed cord, grounded, weighs 11.5lbs. Includes: pipe handle.
Milwaukee 2653-22 Cordless Impact Driver Kit Milwaukee 2730-21 M 18 Fuel Circular Saw Kit SCREW GUN COLLATED DECK SYSTEM
Features a Powerstate Brushless motor. Redlink Plus allows operator to choose between 3 fastening modes: Mode #1 for precision work (0-850 RPM, 200 in-lbs of torque), Mode #2 helps prevent damage to fasteners and material (0-2,100 RPM, 700 in-lbs of torque) and Mode #3 delivers maximum performance for the toughest application (0-2,900 RPM, 1600 in-lbs of torque). Specs: 1600 in-lbs peak torque, 0-2,900 max rmp, 0-3,600 max ipm, M18 and M12 multi-voltage charger, fuel gauge on battery, LED light and weighs 3.6 lbs with battery. Includes two M18 Redlithium XC high capacity battery packs, one-hour multi-voltage charger, belt clip and carrying case. The saw's Redlink Plus intelligence ensures optimized performance and protection from overloading, overheating and over-discharging. The 18 v lithium Ion circular saw's guards and shoe are built of cast magnesium to provide a durable, lightweight base. The saw also features an integrated LED light and a rafter hook for convenient storage on the job. Weighs only 8 lbs. 5,000 rpm.  5/8" arbor size. 50 degrees max bevel capacity. The kit includes (1) M18 Fuel 6-1/2" circular saw, (1) M18 Redlithium XC 4.0 extended capacity battery pack, (1) M18 & M12 multi-voltage charger, (1) blade, (1) blade wrench and (1) contractor bag. Expanded depth settings for high-density flooring materials. Reversible and replaceable non-skid teeth. Uniform toe-nailing and countersink on slick surfaces. Sure-grip guide tube increases stability for a broad range of screws. Uses include: Decking on decks and docks, subfloor to wood or steel, wall plates, stair treads, sheathing and fiber-cement siding to steel. Includes: (1) PRO300S Decking attachment, (1) extension for stand-up driving, (1) Quiver for keeping screws at your fingertips, (1) decking nose clip, (1) DeWalt, Makita or Milwaukee screwdriver motor and (1) tool case.
Super Hawg 1680-21 Right Angle Corded Drill SAW CIRCULAR KIT REAR-HNDL 36V Hitachi DH38YE2 Corded Rotary Hammer
Two operating speeds with a clutch in the low gear range, speed shifting is easy, easy turn gear shift knob, comfort grip handle features 3 positions with 90 degree left-right rotation for maximum operator comfort for all applications. Specs: 120A, no load RPM is 450/1,750, low speed clutch, capacity in: wood (self-feed bit)-4-5/8", (hole saw)-6", metal (twist bit)-1/2", spindle  5/8 in.-16, triple gear train, 8 ft. fixed cord, grounded, 22" long, weighs 14.7lbs. Includes: side handle. Features the blade-left and rear-handle design. The electronically-controlled brushless motor delivers a full 5,100 RPM for efficient cutting. In internal testing, the XSR01PT made up to 558 cross-cuts per charge in 2x4 SPF lumber using two fully-charged 5.0Ah batteries. Large 2-9/16" cutting capacity at 90 degrees will cut 3X lumber in a single pass, and an electric brake for maximum productivity. Die-cast magnesium base and blade guard with die-cast aluminum blade cover and motor housing. Specs: 0-53 degrees bevel capacity with positive stops at 22.5, 45, and 53 degrees, 5,100 no load RPM, 17-1/2" length, and 24.2 lbs. weight. Kit Includes: 18 volt Brushless Rear Handle 7-1/4 Circular Saw, 18 volt Lithium-Ion battery, 18 volt dual port charger, 7-14" saw blade, wrench, and tool bag. Two modes of operation, hammer only and hammer drilling, low vibration levels, 18.8m/s2 (full load), low noise levels of only 95.2 dB (full load), safety clutch shuts down rotation in the event of a bound bit, dust proof cover, auto-stop carbon brushes, sealed grease system, soft elastomer handle, adjustable 360 degree side handle. Specs: full-load speed is 510RPM, full-load impact is 2,800BPM, solid bit capacity is 1-1/2", core bit capacity is 4-1/8", 16-11/32" long, weighs 14.1 lbs. Includes side handle, dust cover, depth stopper and case.
SAW CIRC 60V BRSHLS 7-1/4 2BAT HAMMER ROTARY SDS 1-9/16IN    SAW KIT CIRCULAR 7-1/4IN
HAMMER ROTARY SDS 1-9/16IN
Our Price: $416.98
SAW KIT CIRCULAR 7-1/4IN
Our Price: $461.48
15 Amp, brushless motor circular saw with brake delivers the power and cut capacity of a corded circular saw with the power and convenience of a cordless saw. Delivers up to 339 cuts per charge in 2" x 4" pine. Depth of cut 1-5/8". The electronic brake stops the blade after the trigger is released. 5800 rpm. The saw weighs 7.6 lbs.  Includes: (1) DCS575 7-1/4" (184mm) Circular saw, (2) 60 volt Max Lithium Ion battery packs, (1) Fast Charger, (1) 7-1/4" (184mm) diameter blade and (1) Blade wrench and bag. Two modes of operation, hammer only and hammer drilling. Designed to take on a variety of tasks including drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods. Features large change lever, oversize trigger switch, soft over-molded handle, and 360 degree side handle. Specs: Vibration Level 16.5m/sec2, No Load Speed 620/RPM, Impact Rate 2,800/BPM, Impact Energy 6.3ft/lbs., Drill Bit Capacity: 1-9/16", Core Bit Capacity: 4-1/8", Weight: 15.6lbs. Includes: side handle, depth stopper rod, grease and carrying case.
DRILL RIGHT ANGLE 18V LITHIUM Dewalt D25553K Combination Corded Rotary Hammer Kit Bosch 11264EVS Corded Rotary Hammer
Includes: drill with Quik-Lok, M18 Redlithium SX 4.0 extended capacity battery pack, M18 & M12 multi-voltage charger, contractor's bag. Powerstate brushless moter provides constant power under heavy load, 17"L, 8.5Lbs., 0-1,200 RPM. Capacity in wood: auger bits up to 1-1/4" and self-feed bits up to 2". Motor provides high performance and overload protection while impact energy provides fast drilling and powerful chipping, rear handle mount for increased user comfort in down drilling applications, factory set clutch reduces sudden, high torque reactions if bit jams, trigger lock on, rubber grip. Specs: 120V/AC, optimal concrete drilling-3/8-1-1/4", 8.0 ft-lbs of impact energy, no load speed 490 RPM, blows/min 3300 BPM, length 18.6", weight 13.5lbs. Includes: side handle, carrying case. Variable speed dial, vibration reduction in the hammer mechanism and the grip area provides maximum user comfort for extended periods of work, maintains speed under load and overload protection, delivers 20 percent more power in hammer only mode, rotates and locks chisel into 12 different positions, service light indicates when preventative maintenance is required, cord turret reduces cord wear. Specs: impact energy (ft. lbs.) 7.4 Ft. Lbs./8.1 (turbo), 18" long, max. hole dia. in: concrete-1-5/8", concrete-core bit-4-1/8", no load  BPM is 1,700-2,900, no load  RPM is 170-340, 120V, weighs, 15.1lbs. Includes: (1) 360 degree auxiliary side handle with depth stop, (1) carrying case.
   
 
1