Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > CORDLESS IMPACT WRENCHES
Sort By:
1
Black & Decker AS6NG Cordless Screwdriver Black & Decker LI2000 Cordless Screwdriver SCREWDRIVER 3.6V LITHIUM W/LED
Spindle lock for manual use if desired and for greater control when starting and finishing screws. Forward/reverse slide switch for easy screwdriving and screw removal. Rubber grips provide comfort and control. Narrow nose piece for extended reach in tight places. Specs: 130 RPM, 20 in/lbs of torque An inline grip and compact design makes this 4 volt Max cordless rechargeable screwdriver ideal for tackling a variety of household tasks. Comfortable to use and fits in tight spaces. 180 rpms and 35 in-lbs of torque provide plenty of power for a variety of applications. 3.6 volt Lithium screwdriver, 180 rpm provides good speed with 35.6 in. lbs of torque. Built-in LED light for visibility inside cabinets, closets or outside after dark. Compact size and very light weight at 1.06 lbs. Includes USB charger and screwdriver bit.
SCREWDRIVER 7.2V LITHIUM-ION  SCREWDRIVER 4V STORAGE W/8BITS Rockwell WX252L  Cordless Screwdrivers
Lithium-Ion battery for more power and run time. Holds a charge up to 18 months. 1/4" Hex quick-change chuck. Two speeds (200/400 rpm) for versatility. 16 torque/clutch settings. Built-in LED work light. Battery charge level indicator. Torque: 46 in-lbs. Battery capacity: 1300 mAh. Recharging time: 3-5 hours. Adaptor: UL listed. Includes: charger, (4) quick-change hex-shank drill bits and (4) screwdriver bits. On-board eight-bit storage plus long lasting Lithium power keeps it all ready at your fingertips making screw driving tasks quicker and easier. From assembling furniture and toys to hanging photos on your walls, on-board bit storage plus cordless convenience helps you finish in a flash. Extended reach screwdriver allows for reaching in tight spots. 4 volt lithium 1.5 Ahr battery. 36 in lbs of torque. LED light. Forward and reverse switch. Includes 6 bit tips and a 5 hour charger. Weighs only 1.1 lbs.
Black & Decker LDX172C Cordless Drill/Driver DRILL/DRIVER VSR 18V          SmartSelect LI4000 Cordless Screwdriver
Mid-handle design for balance and control. Fan-cooled motor extends drill life. Lithium battery is integrated into the drill. Specs: 60 in-lbs torque, 550 rpm, and weighs 2.77 lbs. Includes charger and double ended bit. 3/8" keyless chuck; 16 torque/clutch settings. Variable speed; 0-550 rpm reversible. Electric brake. LED work light. Includes Ni-Cad battery, charger, 13 piece drill/driver bit set and storage case. This 4 volt Max rechargeable cordless screwdriver is powerful and convenient. Compatible with most micro USB chargers. Features magnetic bit storage and an LED light to illuminate work surfaces. 180 rpm motor; 40 in-lbs torque. Pistol grip for access into tight areas.
CIRCULAR SAW 13AMP CORDED     DRILL/DRIVER 12V L-ION 2-SPEED SAW CIRCULAR 13A 7-1/4IN
SAW CIRCULAR 13A 7-1/4IN
Our Price: $45.01
The 13 amp 7-1/4" circular saw with laser cut line guide has the power you need to tackle tough jobs. The laser cut line guide provides you with added confidence to make clean and accurate cuts. This circular saw is also equipped with a convenient spindle lock, allowing for easy blade changes. Easy bevel adjustment allows for accurate 0-45 degree angled cuts. Depth adjust to 2.5" at 90 degrees. Lightweight design for enhanced control. 0-5,300 rpm. Includes Circular saw blade and wrench. Compact, lightweight and powerful 250 in-lbs of torque. 0-350, 0-1300 rpm speed ranges, reversible. Built-in LED work light. 3/8" single-sleeve keyless chuck. Includes Lithium-Ion battery, charger and double-ended screwdriver bit. Powerful 13 amp motor. Spindle lock for easy blade changes. Comfort rubber insert in "D" handle. Externally replaceable brushes. Specs: 5,500 RPM no-load speed, Cutting Depth: 90 degrees - 2-7/16" and 45 degrees - 1-13/16", 832 lbs. weight. Includes: 24T Carbide-tipped Blade, Rip Guide, and Blade Wrench.
Skil 2240-01 Cordless Drill/Driver SCREWDRIVER 4VLITH W/SCREWHOLD Rockwell SS2504 Cordless Drill/Driver Kit
Features 15+1 application settings, on-tool bit storage and soft grip handle. Specs: 0-700 rpm no load speed and with battery weighs 4.5 lbs. Includes battery, double ended bit, charger & carrying bag. Screw holder attachment holds screws firmly in place for one-handed operation and easy access to hard to reach spaces. Rapid reloadable cartridge allows you to store 6 bits in the tool; eliminating lost bits and time spent looking for them. Advance the correct bit with a simple slide action; no more fumbling around with small bits. Front mounted LED light means no more working in the dark. Powerful 4 volt MaxLithium battery holds a charge for up to 18 months. Side-mounted switch allows you to operate in reverse and the rubber handle provides a comfortable grip. No load speed of 230/min. Charging time only 5 hours. 1/4" hex chuck size. Weighs only 1.1 lbs. Includes Worx Screwdriver with screw holder, 1 reloadable cartridge with 6 bits (PH1, PH2, SL4, SL6, SQ1 and SQ2) and a 4 volt MaxLithium charger. Lithium drill/driver with 18 plus 1 clutch settings. 0-700 rpm; 110 in lbs of torque. Weighs only 2.1 lbs. Includes 3-5 hour charger and (1) 12 volt Lithium battery. Also includes a built in LED work light that is activated by the drill trigger. The 3/8" keyless chuck allows for easy bit changes.
Black & Decker LDX112C Cordless Drill/Driver SAW CIRCULAR 14A 7-1/4IN      CIRCULAR SAW 7-1/4 INCH
For drilling and screwdriving through wood, metal and plastic. LED work light illuminates the surface for drilling in dark places. Soft grip handle provides added comfort during use. Specs: 11 position clutch, 100 in-lbs torque, 0-600 rpm and weighs 3.5 lbs. Includes 12 volt lithium ion battery, charger and double-ended bit. Upgraded 14 amp motor for longer saw life. Spindle lock makes blade changes a breeze. 51? Bevel with Positive Stop at 45? for added cutting capacity. 2 point line of sight cuts straight lines with ease. Improved dust blower keeps line of cut free of sawdust. Power-On indicator for powered tool alert. Lighter weight design for less user fatigue. On-tool wrench storage for quick and easy blade changes. Safety Lock/Guarded trigger minimizes accidental starts. Anti-Snag Lower Guard reduces snags when making narrow cut-offs. Rear Lever Depth Adjustment quickly assures desired cut depth. Includes: (1) 5180 Circular Saw, (1) 20-tooth Carbide Blade and (1) Blade Wrench. 7-1/4" Circular saw with 12 amp motor and 5,500 rpm. 2-1/2" cut capacity at 90?; 1-49/64" at 45?. Spindle lock for easy blade change. 10' cord to allow most uses without an extension cord. Lightweight at only 8.8 lbs. Includes 7-1/4" carbide tipped blade, arbor wrench and rip fence.
SAW CIRCULAR 7-1/4IN 15A STEEL Black & Decker GCO18SFB Cordless Drill Rockwell RC2804K2 Cordless Drill/Driver
15 amp motor running at 5,500 rpm provides power and speed through applications. Steel shoe, along with metal upper and lower guards that provide added durability. It offers spindle lock and depth adjustment and a 45 degree max bevel adjust to provide ease of use. An Aux handle provides comfort and clear line of sight. At only 9.5 lbs this unit is convenient to use. Includes Circular Saw, 7-1/4" 18 tooth carbide tipped blade and Allen wrench. Drill has variable speed reverse for drilling and driving control, keyless chuck makes bit changing quick and simple, 24 position clutch prevents screws from stripping, 0-750 RPM, soft grips for comfort, slide pack battery provides easy installation and removal of the battery. Stud sensor detects studs through walls up to 3/4" thick. Includes cordless drill with stud sensor, (1) battery pack, (1) DC plug charger and storage bag. Variable speed, 15 clutch positions plus drilling mode to easily dial in the correct torque required for the job. Ergonomic soft grip handle for improved comfort, battery capacity indicator clearly displays the status of the battery, LED light increases visibility. Specs: 0-600 rpm no load speed, 135 in-lbs max torque, 15+1 clutch positions, 3-5 hr charging time and weighs 3.7 lbs. Includes charger, (2) Ni-Cd batteries, (2) double ended bits and carry bag.
SAW CIRCULAR COMPACT 4.5INCH  DRILL/DRIVER LITHIUM-ION 20V  SAW CIRCULAR 7-1/4IN
Compact saw with a maximum cutting depth of 46mm. Powerful 4 amp motor cuts through a variety of materials with ease. Bevel adjustment for special work conditions. Designed for easy one-handed operation. Quick cutting depth adjustment for easy setting depth. Spindle lock button for easy blade changes. Dust extraction facility with built-in dust port. 3700/min no load speed. Blade size: 120 mm. 45 degree bevel capacity. Compact, lightweight and powerful. More power and double the run time of Ni-Cad drills. Battery holds its charge up to 18 months in storage. High performance motor produces up to 350 in-lbs of torque. Two variable speed ranges for versatility. Electric brake. Built-in LED work light. On-board battery power indicator. 3/8" (10mm) single sleeve keyless chuck. 21+1 torque/clutch settings. Includes battery, charger and double ended screwdriver bit. Upgraded 15 amp motor for longer saw life. Single beam laser for accurate cuts. Spindle lock makes blade changes a breeze. 51? Bevel with Positive Stop at 45? for added cutting capacity. Improved dust blower keeps line of cut free of sawdust. Power-On indicator for powered tool alert. Carry bag for convenient portability and storage. On-tool wrench storage for quick and easy blade changes. Safety Lock/Guarded trigger minimizes accidental starts. Anti-Snag Lower Guard reduces snags when making narrow cut-offs. Rear View Depth Adjustment for clear visibility and quick cut-depth changes. Ball Bearing Motor Construction for twice the life compared to the previous model. Includes: (1) 5280 Circular Saw, (1) 24-tooth Carbide Blade, (1) Blade Wrench and a carrying bag.
Black & Decker LDX120C Cordless Drill/Driver Black & Decker BDCDMT120 Lightweight Cordless Drill Rockwell SS2800 Cordless Drill/Driver
Use for drilling and screwdriving through wood, metal and plastic. LED work light illuminates the surface for easier drilling in dark places. Compact and lightweight. Specs: 115 in-lbs torque, 650 rpm, 11 clutch settings and weighs 4.25 lbs. Includes: drill/driver, 20V max lithium ion charger, 20V max lithium ion battery, 2" double ended bit tip and storage bag. Cordless drill with matrix quick connect drill attachment. Compact and lightweight design allows you to carry out drilling/driving tasks in confined spaces with ease. Lithium Ion battery holds a charge for up to 18 months. 20 volts; 0-800 rpm; 10 clutch settings and 3/8'' chuck size. Drill includes double sided bit tip, 20v max power unit, drill/driver attachment, 20v max battery and charger. Specs: 200 in lbs of torque, 2 speed gear box that allows for high torque or high speed applications, 0-350 rpm/0-1,250 rpm, 16 position clutch, LED light, battery charge indicator and weighs 2.8 lbs. Includes a 18V lithium battery and 3 to 5 hour charger. Free Batteries For Life.
HXP DB3DL2 Adjustable Inline Dual Speed Cordless Screwdriver Kit DRILL/DRV CORDLESS 20V 3/8IN  Dewalt DW920K-2 Adjustable Inline Cordless Screwdriver Kit
Reversing trigger switch, compact and lightweight fits easily into tight spaces, 21-Stage clutch, integrated LED lights work areas, Bit Lock  for fast and easy bit changes, adjustable 2-position handle, non-slip elastomer grip. Specs: 44 in/lbs torque, no load speed 200/600 RPM, 1/4" hex chuck,1.5Ah Lithium Ion batteries, 30 min. charging time, weighs 0.9lbs. Includes: 3.6V HXP 1.5Ah Lithium Ion batteries, charger, case. Drive more screws flush the first try with the Lithium cordless drill that powers through wood, metal and plastic. AutoSense technology means you'll have less stripped screws, less work surface damage and ideal accuracy. Eliminates the guesswork with a cutting-edge electronic clutch that automatically stops when a screw is in place.  An LED light illuminates work surfaces for easier drilling in dark places. Compact and versatile. Lithium Ion battery is always ready, holds a charge up to 18 months. Active depth control for precise adjustments. 0-800 rpm. Includes: (1) 20 volt max Drill/Driver, (1) 20 volt Max Lithium-Ion battery, (1) charger and (1) double ended bit. Variable speed and reversing trigger, adjustable two-position handle allows for operation as both in-line and pistol-grip, electric brake provides increased productivity, heavy duty metal hinge provides secure and sustained two position lock, quick screwdriver bit change. Specs: no load speed 0-500RPM, 1/4" hex drive, 80 in/lbs. of max torque, weighs 3.5lbs. Includes: (1) one hour charger, (2) 7.2V compact batteries, (2) screwdriver bits, kit box.
Makita 5740NB Corded Circular Saw Hitachi C7ST Corded Circular Saw Porter-Cable PCC601LA Cordless Drill/Driver Kit
Heavy gauge aluminum wraparound base ensures stable support, ruler markings on base for precise cutting, only 84dB for quiet operation. Specs: 5/8" arbor, 7-1/4" blade diameter, max cutting capacity: 90 degrees-2-1/2", 45 degrees-1-5/8", no load RPM-5,200, 11-3/4" long, weighs 8.0lbs. Includes: 7-1/4" 24T Framing Blade - General Contractor and Hex wrench. Powerful 15 amp motor to tackle tough cutting jobs. Blade speed of 6,000 rpm for smoother, faster, burn-free cuts. Soft grip handle for reduced vibration and increased comfort. Integrated dust blower for a clear line of sight and clean work surface while cutting. Dust chute efficiently expels dust, chips and debris. Low center of gravity keeps the saw close to the work piece for more accurate cuts. Single handed bevel adjustment with small set screw to set the saw perfectly square. Single handed depth of cut lever for quick and simple adjustments. Cutting depth: 45? 1-7/8"; cutting depth: 90? 2-7/16". Lightweight at just 9.5 lbs for superior maneuverability. Cord length of 8'. Includes blade (320843), case (333557) and box wrench (940543). High performance motor delivers 283 units watts out, with a 2 speed gear box (0-350/0-1500 rpms). 1/2" keyless chuck for fast and easy bit changes. LED light brightens dark work areas. Compact (8.25" long) and lightweight (3.5 lbs). Includes: (1) Drill/Driver, (1) 1.3 aH battery and (1) charger.
Milwaukee 2401-22 Compact Cordless Screwdriver Kit Skil 2888-03 Cordless Drill/Driver Dewalt DC820B Cordless Impact Wrench
Features variable speed trigger for output power control, quick bit-loading, battery fuel gauge displays remaining run-time, metal gear housing, built in led for illumination of dark work spots and over mold side and grip. Specs: 0-500 rpm no load speed, 175 in-lbs. torque, spindle lock, 14+1 clutch settings, capacity in: steel 1/4", wood 1/2" and weighs 2.0 lbs. Includes: (2) 12V Red Lithium battery packs, 12V charger, and compact driver storage bag. Variable speed trigger controls users drilling speed. 2-speed gear box for high speed drilling and high torque applications. Matches driving power to specific applications and prevents screw stripping. Batteries included delivers double the run time. Specs: 0-400/0-1,250 no load rpm, 25+1 clutch settings, on-tool bit storage and weighs 4.5 lbs with battery. Includes two batteries, charger, double-ended bit and carrying case. Frameless motor for extended tool durability and life, compact size and weight, replaceable brushes for increased serviceability, textured anti-slip comfort grip, durable magnesium gear case and all metal transmission for extended durability, heavy duty impacting mechanism directs torque to fastener without kickback. Specs: 18V, drive size is 1/2" square with detent pin retention, no load speed is 0-2,400RPM, impacts/min. 0-2,700IPM, 1,740 in/lbs max torque, 145 in/lbs max torque, 5-3/4" long, weighs 2.2 (tool only)lbs. Includes: tool only (batteries and charger sold separately).
Rockwell RK3441K  Circular Saws Hitachi DS10DFL2 Drill/Driver Kit Max DCF610S2 Single Speed Standard Cordless Screwdriver Kit
4-1/2" Compact Circular saw. 3,500 rpm, 5 amp motor, 1-11/16" max cutting depth at 90 degrees; 1-1/8" cutting depth at 45 degrees. Weighs only 5 lbs. Left handed blade design for great cut-line visibility. Includes (1) 24 teeth TCT saw blade, rip fence, vacuum adapter and a hex key for changing blades. Ergonomically designed for accurate one handed cutting. Allows the user to hold the material for secure cutting. Durable steel shoe resists scratching when cutting tile and masonry. Powered by Lithium-Ion battery for fade-free power and lighter weight (2.2 lbs)  which helps reduce fatigue during extended or elevated use. 300 in/lbs of torque to handle tough jobs in tight spaces. Two-speed gear setting to match the appropriate speed to the application. 21 plus 1 clutch with 21 torch settings and a drill mode for ultimate precision and control. Optimized handle dimensions for a secure grip and ergonomic comfort in all hand sizes. LED light effectively illuminates dark work spaces. Free-standing design allows drill to stand on its own when not in use. Charger circuitry prevents overheating and power loss. Balanced tool weight ensures proper wrist alignment. 3/8" keyless chuck for simple bit replacements and a variety of applications. No load speed 0-350/1,300 rpm. Responsive variable speed trigger for complete control during operation. Kit includes (2) 12 volt peak Lithium-Ion batteries, (1) 12 volt peak 25 minute quick charger, (1) No. 2 Phillips Driver bit, (1) 7 piece bit set and (1) carrying case. Compact, lightweight tool at only 2.2 lbs is designed to fit into tight areas. One-handed loading 1/4" hex chuck accepts 1" bit tips. 3 LEDs provide light and increased visibility without shadows. 15.0 clutch settings. 160 UWO max power. No load speed: 0-1,050 rpm. The kit includes: (1) 1/4" Screwdriver, (2) 12V Max Lithium Ion battery packs, (1) fast charger, (1) belt hook and (1) contractor bag for convenient storage.
Hitachi C7SB2 Corded Circular Saw Black and Decker DCF680N1 Cordless Screwdriver Kit Versa Cut RK3440K Compact Mini Corded Circular Saw
Lightweight, easy to maneuver and transport, bevel capacity from 0-55 degrees. Heavy-duty die cast aluminum alloy, one piece base, offers easy to read front and side scales, cutting depth lever, non-slip elastomer grip handle, carbon brush access. Specs: 5/8" arbor, no load speed 6,000RPM, spindle lock, bevel capacity 55 degrees, depth of cut at: 90 degrees-2-7/16", 45 degrees-1-7/8", 7-1/4" blade diameter, weighs 9.5lbs. Includes: 24 tooth carbide tipped blade, blade wrench, carrying case. Motion activation variable speed and reversing control for precise fastening control. Variable speed 0-430 rpm for fastening into wood, plastic and light gauge metal. Adjustable two-position handle allows for operation in either in-line or pistol grip. Allows control when completing light fastening applications. Allows illumination in confined areas without shadowing. Battery state of charge on tools allows end users to know when to charge packs. Allows for quick screwdriver bit change and holds 1" bit tips. 8 volt max battery pack allows for longer run time and charges in one hour. Tool weighs only 1.1 lbs. Includes: 1 charger, (1) 8 volt max compact battery and kit bag. Cuts a variety of materials including tile. Plunge cut depth settings for accurate, precision cutting. Includes (3) 3-3/8" blades: carbide blade for wood; diamond blade for tile; HSS for metal and rip fence and plastic shoe guard to prevent scratches on fine wood. 1-1/16" max depth of cut. Laser cutting guide. 3,500 rpm provides high torque and quick cutting. 10' rubber cord. Weight 3.3 lbs.
Bosch PS21-2A Compact Cordless Pocket Driver DRILL/DRIVER 20V LITH W/2-BATT Makita 5007F Corded Circular Saw
Features a bright LED light. Includes 30 minute charger, (2) lithium-ion 12V max batteries and carrying case. Specs: 5.6" length, 0-350/0-1,300, 12V max rating, 265 in lbs torque and weighs 1.8 lbs. Worx 20 volt lithium batteries fit a wide range of Worx cordless lawn and workshop tools. MaxLithium battery provides maximum run time and holds its charge up to 18 months. Variable 2-speed design covers a wide range of drilling and fastening applications. Extremely compact and lightweight for fatigue-free work. 3/8" keyless chuck for fast bit changes. 15 plus 1 position clutch allows precise torque management. 265 in-lbs of torque makes quick work of tough drilling and driving jobs around the house or workshop. LED light with low battery indicator. No load speed: 0-350/0-1350/min. Rubber over mold grip for improved comfort and control. Weighs only 2.8 lbs. Includes: Cordless drill and driver, (2) 20 volt MaxLithium batteries and a 20 volt MaxLithium charger. Powerful 15 amp motor delivers 5,800 rpm for proven performance and jobsite durability. Lower guard design improves performance when making bevel and narrow cuts. Large cutting capacity (2-3/8" at 90 degrees, 1/-3/4" at 45 degrees). Two built-in L.E.D. Heavy gauge aluminum wrap-around base for improved durability. Two lights illuminate the line of cut for increased accuracy. Well balanced design for superior handling and performance. AC/DC switch allows for use with alternative power sources. Bevel cuts 0-45 degrees for the most common angles. Large easy to read markings on depth and bevel scales. Flat motor housing design increases stability when changing blades. Conveniently located shaft lock for easy blade replacement. All ball bearing construction for longer life. Ideal for framers, builders, masons and siding contractors.
HAMMER DRV-DRL 18V 1/2IN      Dewalt DWE575 Lightweight Corded Circular Saw Porter-Cable PCC606LA Drill/Driver Kit
HAMMER DRV-DRL 18V 1/2IN
Our Price: $120.54
Anti-snag ball bearing lower guard provides smooth guard operation and long life in harsh environments. Toughcord provides longer durability against cord pull outs. Includes carbide tipped blade, blade wrench and instruction user manual. Specs: 1950 W max watts outage, 5200 rpm no load speed, 57-degree bevel capacity, 22.5 and 45-degree bevel stops, 2-9/16" depth of cut and weighs 8.8 lbs. High performance motor delivers 330 unit watts out. 2 speed gear box (0-400/0-1,600) delivers the power needed to complete large or small applications. Metal ratcheting chuck minimizes bits slipping in chuck. Battery gauge displays charge remaining in the battery. LED light brightens dark work areas. 20 volt max Lithium Ion batteries with 1.5 amp/hour cells delivers more power and run time in a smaller package. Compact size (7-3/4" length) and light weight (3.5 lbs) allows tool to work in tight areas and minimizes user fatigue.
Bosch CS10 Corded Circular Saw Dremel Saw-Max Circular Corded Saw Kit Milwaukee 2101-21 Cordless Screwdriver Kit
Unmatched durability and flatness, 56 degree level, powerful blower to clear dust in line of cut, High strength and lightweight magnesium upper guard, anti-snag lower guard, adjustable bevel and depth levers, on-tool wrench storage, removable end cap,easy, serviceable brushes, textured soft grip, heavy duty 22 amp switch, spindle lock. Specs: 120V, 5/8" arbor, bevel-56 degrees, bevel stops-22.5/45 degrees, 7-1/4" blade diameter, depth of cut at: 90 degrees-2-7/16", 45 degrees-1-7/8", 50 degrees 1-5/8", no load RPM-5,600, 10ft cord, weighs 10.2lbs. Includes: 24 tooth carbide blade, carrying bag. Makes quick straight cuts, flush cuts and plunge cuts in a wide variety of materials. Includes 2in x4in  cutting guide, 10 dust port adapter, multi-purpose carbide wheel, metal cut-off wheel, tile diamond wheel, multi-purpose flush cut carbide wheel, storage case and owner's manual. Specs: Worm Drive gearing, 7 ft. cord length, 17,000 rpm, 120V - 60Hz and weighs 3.85 lbs. Features 21 position clutch setting with auto shut-off and 44" pounds of torque. 2-speed gearbox 200/600 rpm. 45 minute charge time. 1/4" hex drive size. Kit includes: (1) M4 1/4" hex screwdriver, (1) M4 2.0 battery and (1) M4 charger.
North American Tool 52224 Double Cut Saw Milwaukee 0370-20 Right Angle Close Quarter Corded Drill Milwaukee M12 Cordless Hammer Drill/Driver
Lubricating system cuts through soft metals like aluminum, copper and stainless steel without overheating or warping. Less splintering and breaking. Tungsten carbide tips. Kerf .131". Arbor: 5/8". Provides a unique chuck angle for reaching into tight areas. Large paddle trigger, textured grip with convenient forward/reverse lever. Angled cord exit keeps cord out of work area. Specs: 120 volts AC, 0-1,300rpm, 1/2in.-20 spindle, 3/8" metal twist bit capacity, double insulated construction, double gear train, 8 ft. fixed cord and weighs 3.9 lbs. Includes chuck key with holder. Lightweight and versatile for longer life. Powerstate brushless motor delivers up to 350 in-lbs of peak torque with maximum sustained torque to complete a variety of applications. Redlink plus intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. Runs cooler and quieter with no wearable components. Onboard fuel gauge helps you monitor the charge precisely, so there's less downtime on the job and a built-in LED light illuminates the work surface. All metal ratcheting locking chuck provides maximum grip, bit retention and durability. New contoured soft grip gives you ultimate comfort during prolonged use. Speed 0-450/0-1,700 rpm. 7.75" length.
7-1/4 CIRC SAW WITH CASE      S-B PS11-102 Right Angle Cordless Drill/Driver Kit Dewalt DCD740B Right Angle Compact Cordless Drill/Driver Kit
7-1/4 CIRC SAW WITH CASE
Our Price: $131.29
Powerful 15 amp motor for a high power-to-weight ratio. Large ball bearings and gears for longer tool life. Lower guard design improves performance when making bevel and narrow cuts. Large cutting capacity 2-1/2" at 90 degrees, 1-3/4" at 45 degrees and 1-3/8" at 56 degrees. Large and easy to read marking on depth and bevel scales. Heavy gauge aluminum wrap-around base for more accurate cuts. Large ball bearings and gears for longer tool life. Built-in dust blower clears the line of cut for greater accuracy. Ergonomic rubberized grip provides added comfort. Includes: 7-1/4" Carbide tipped blade, blade wrench and tool case. A 12 volt motor provides 1,300 rpm as well as 115 in-lbs. max torque. 5 position pivoting head articulates from 90 degrees to 180 degrees, making it ideal for working in tight areas and corners. 3/8" auto lock chuck for simple bit replacements and a variety of applications. Variable speed trigger for perfect speed regulation. Motor brake for exact serial screw driving. Kit also includes (1) high capacity battery, charger and soft case. Compact front to back length. Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger. Specs: 360UWO, 2 speed settings, 0-650/0-2,000, plastic ratcheting chuck and weighs 3 lbs. Includes tool only with belt hook and 2" Phillips tip bit.
Dewalt DCD780B Cordless Drill/Driver Kit Dewalt DCD790B Brushless Drill/Driver Kit Hitachi DS18DGL Drill/Driver Kit
Compact, lightweight design fits into tight areas. High speed transmission delivers 2 speeds for a range of fastening and drilling applications. Specs: 350UWO, 2000 max rpm, 15 clutch settings, 0-600/0-2000 rpm ratcheting chuck and weighs 2.7 lbs. Includes belt hook and on-board bit holder. Tool only. Brushless motor delivers more run time. Compact (7.2" front to back), lightweight design fits into tight areas. High speed transmission delivers 2 speed settings (0-600/0-2,000 rpm) improving speed and torque control across a range fastening and drilling applications. Ergonomic comfort grip handle provides ideal balance and tool control. Metal 1/2" ratcheting chuck for superior bit gripping strength. LED light with 20 second trigger release delay to increase visibility in dark or confined spaces, LED placement on tool foot eliminates chuck shadows. Battery And Charger Not Included. Powered by Lithium-Ion battery for less weight (3.7 lbs) and fade-free power. Powerful 400 in/lbs of torque to handle tough jobs in tight spaces. Two speed gear setting to match the appropriate speed to the application. 22 plus 1 stage clutch delivers 22 torque settings and a drill model for ultimate precision and control. LED light effectively illuminates dark work spaces. 1/2" keyless ratcheting chuck for quick and simple bit replacements. Responsive variable speed trigger provides complete control during operation. No load speed 0-450/1,250 rpm. Kit includes: (2) 18 volt Lithium-Ion batteries, (1) 18 volt 35 minute charger, (1) double-sided Phillips bit and (1) carrying case.
Milwaukee M12 Cordless Drill/Driver Kit Tilt-Lok 6390-21 Double Insulated Corded Circular Saw Makita 5477NB Hypoid Corded Circular Saw
Delivers up to 275 in. lbs of torque. On-board battery fuel gauge displays remaining run time. New ergonomic handle design for increased comfort. Metal ratcheting chuck for maximum durability. 7-3/8" length. Weighs only 2.5 lbs. LED light. Kit contains: (1) M12 3/8" drill/driver, (2) M12 RedLithium battery, (1)M12 Lithium-Ion battery charger, (1) belt clip and (1) carrying case. Tilt-Lok main handle adjusts to the work or most comfortable work position, cuts tough materials, clear sight line with superior blade visibility from either side, 3.25 maximum horsepower, blade can bevel to 50 degrees, helical steel gears and a 22 amp switch. Specs: 7-1/4" blade diameter, 5/8" arbor, blade side is right, 5/8" spindle, metal/wood cutting- wood, spindle lock, adjustable soft grip handle, blade position is right, depth of cut at: 90 degrees-2-7/16", 45 degrees-1-13/16", 50 degrees 1-11/16", 9 ft. fixed cord, double insulated, 13-3/4" long, weighs 10.4lbs. Includes: circular saw blade, hex blade wrench and a carrying case. Efficient hypoid gears deliver more power and greater surface contact than conventional worm drive gears, oil bath technology and sealed gear housing for less maintenance, ergonomic rubberized grip, 0-51.5 degree bevel capacity with positive stops at 45 and 51.5 degree, ideal for truss and rafter cut-outs, lower guard design, blade wrench is attached to the saw, externally accessible brushes. Specs: 7-1/4" blade diameter, 5/8" arbor, max cutting capacity: 90 degrees-2-3/8", 45 degrees-1-3/4", 50 degrees 1-9/16", no load RPM-4,500, weighs 14.3lbs. Includes: carbide tipped blade, blade wrench.
DRILL/DRIVER BRSHLS 1/2IN 20V Dewalt DCD950B Cordless Hammer Drill/Driver Kit Dewalt DCD710S2 Cordless Drill/Driver Kit
Brushless motor provides 50 percent more run time. Powerful motor has 370 MWO of power for heavy duty Applications with minimal stall. Transmission has 1,800 max rpm for speed of drilling and fastening applications. 1/2" Ratcheting chuck for improved and reliable bit retention. Compact size of 7.4" for work in tight spaces. Lightweight design at only 3.3 lbs for less fatigue. mode Collar allows you to switch from drilling to fastening mode without losing your clutch setting. Variable speed and reversible this drill is compatible with the existing system of DeWalt 18 volt power tools. Heavy-duty 1/2" self tightening chuck tightens throughout operation providing superior bit gripping strength. Three speed all-metal transmission for fastest application speed and improved run time and LED work light. High power, high efficiency motor delivers 450 unit watts for superior performance in all drilling and fastening applications. Specs: max power 450 uwo, (3) speed settings, max rpm 0-500/0-1,250/0-2,000, max bpm 0-8,500/0-21,250/0-34,000, clutch settings 22, chuck type metal, self-tightening, tool weight 3.9 lbs. Includes: Tool only (batteries and charger sold separately), 360 degree side handle. Compact, lightweight, two speed transmission for optimal speed and torque control. LED light provides visibility in dark areas. Specs: 180UWO max power, 0-400/0-1500 rpm no load speed, 25 nm max torque, max. drilling capacity [wood] 19 mm, max. drilling  capacity [metal] 10 mm, spindle thread and weighs 2.2lbs. Includes two 12V max lithium ion battery packs, fast charger, belt hook and contractor bag.
Dewalt DCF813S2 Lightweight Cordless Impact Wrench Kit Porter-Cable PCCK600LB Cordless Drill/Driver Kit HAMMER DRIVER-DRILL 18V 1/2IN
Compact and lightweight for ease of use in tight areas with a slim handle and contoured grip, three LED lights that provide visibility without shadows in dark work areas, a battery that has been placed at the bottom of the handle that allows the tool to stand up between uses. Specs: 3/8-inch hog ring anvil, 1,150 in/lbs max torque, weighs 2.0lbs. Includes: (2) 12 Volt Max Lithium-Ion battery packs, (1) 40 minute charger and a contractor bag. High performance motor delivers 330 unit watts out. Metal ratcheting chuck minimizes bits slipping in chuck. 2 speed gear box (0-400/0-1,600) delivers the power needed to complete large and small applications. Battery gauge displays charge remaining in the battery. LED light brightens dark work areas. 20 volt Max Lithium Ion batteries with 1.5 amp/hour cells delivers more power and runtime in a smaller package. Compact size (7-3/4" length) and lightweight (3.5 lbs) allows tool to work in tight areas and minimizes user fatigue.
Dewalt DWE575SB Circular Saws Makita 5007MG Corded Circular Saw Bostitch BTC400LB Compact Cordless Drill/Driver Kit
Lightweight circular saw with electric brake weighs only 8.8 lbs. Electric brake stops the blade after trigger is released. 15 amp motor delivers power for  the toughest applications. 57 degree beveling capacity with stops at 45 degree and 22.5 degrees. Depth of cut capacity of 2-9/16". Ball bearing lower guard provides long life in harsh environments. Durable high grade aluminum smooth base for accurate cuts. Lower guard design improves performance when making bevel cuts and cutting shims. An integrated dust blower allows the user to clear its line of sight while cutting. Tough cord protection system provides durability against cord pull-out. On-board blade wrench storage allows for easy storage and convenience for blade changes. Powerful 15.0 amp motor delivers 5,800 rpm for proven performance and jobsite durability. Magnesium components create a lightweight saw (10.6 lbs) that is well balanced and jobsite tough. Make quick, one-handed adjustments using large, rubberized levers. Better fit and more control with comfortable rubber grip handle. Settings are easy to read with oversized number and ruler markings. Large cutting capacity (2-1/2" at 90 degrees) and bevel capacity (0-56 degrees) with positive stops at 22.5 and 45 degrees. Two built-in L.E.D. lights illuminate the line of cut for increased accuracy. Built-in dust blower clears the line of cut for greater accuracy. Blade wrench is attached to saw for fast and convenient blade changing. Reinforced power cord withstands jobsite abuse and lower repair costs. Includes a premium 7-1/4" carbide tipped framing blade that cuts faster and lasts longer. 2 speed gear box (0-350, 0-1500 rpm) covers a wide range of drilling and driving applications. High output motor delivers 480 in. - lbs. of max torque. 1/2" keyless metal locking chuck provides improved durability and bit retention. 24 position clutch reduces stripping of fasteners by properly adjusting the torque setting. Integral LED work light provides greater visibility to work area. Includes: (1) BTC400 18 volt Lithium Drill/Driver, (2) BTC480L Lithium Ion batteries, (1) BTC492L 18 volt Lithium Ion charger, (1) PH #2 Screw Driving bit and (1) Bit tip storage.
M12 2415-21 Right Angle Cordless Drill/Driver Kit WRENCH DRV IMPACT 18V 3/8INSQ Milwaukee M12 Cordless Hammer Drill/Driver Kit
Built in electronics include variable speed control, an electronic clutch, 11 settings plus drill mode, fuel gauge,and overload protection, single sleeve ratcheting chuck, extended paddle switch, LED's illuminates work surface. Specs: 12V. no load speed is 800RPM, 100 in/lbs torque, head length is 3-3/4", single sleeve, ratcheting, Lituium-Ion battery, 11.75" long, weighs 2.43lbs. Includes: (1) M12 Red Lithium battery, (1) 30-minute charger, (1) carrying case. Delivers up to 275 in lbs of torque. On-board battery fuel gauge displays remaining run time. New ergonomic handle design for increased comfort. Metal ratcheting chuck for maximum durability offers ideal bit grip, so you won't have to stop for bit re-tightening or lost bits. 7-1/2" overall length and weighs only 2.7 lbs. 30 minutes charge time. Kit includes: (1) M12 3/8" hammer drill/driver, (2) M12 Red-Lithium batteries, (1) M12 Lithium-Ion battery charger, (1) belt clip and (1) carrying case.
DRILL HAMMER CDLSS 1/2IN 20V  IMPACT WRENCH 20V MAX LITH    Dewalt DW160V Right Angle Corded Drill
IMPACT WRENCH 20V MAX LITH
Our Price: $161.11
Compact size (7-3/4" length) and lightweight at only 3.5 lbs. Allows tool to work in tight areas and minimize user fatigue. High performance motor delivers 330 unit watts out. 2 speed gear box (0-400/0-1,600) delivers the power needed to complete large and small applications. LED light brightens dark work areas. Metal ratcheting chuck minimizes bit slipping in chuck. Battery gauge displays charge remaining in the battery. Kit includes: (1) Drill driver, (2) Lithium Ion compact batteries, (1) Lithium Ion charger, (1) Double-ended bit tip and (1) Kit box. Powerful motor produces 260 ft-lbs of torque for heavy applications. Maximum of 1,650 rpm's for driving large fasteners quickly. Full variable speed trigger for precision control. Includes the Cordless Impact Wrench, 20 volt Max Lithium Ion battery and Charger. Compact for easy access in tight places with variable speed reversing, paddle switch, shielded chuck, 100 percent ball bearing construction, double gear reduction increases torque performance, decreases gear stress, pistol grip handle. Specs: no load speed 0-1,200RPM, max watts out 200W, capacity in: wood (spade bit)-1-1/8", wood (hole saw)-1-1/8", steel (twist bit)-3/8", (hole saw)-3/4", gear reduction double , anti-slip grip, anti-lock control, spindle lock , weighs 3.75lbs. Includes: chuck key with holder.
ANGLE DRILL CORDLESS 18V 3/8IN Dewalt DCD771C2 Cordless Drill/Driver Kit DRILL/DRIVER CMPT BRSHLESS 20V
Designed with a high performance motor that delivers 300 unit watts out (UWO) of power for completing a wide range of applications. Compact, lightweight design fits into tight spaces. High speed transmission delivers 2 speeds (0-450 and 1,500 rpm) for a range of fastening and drilling applications. 1/2" single sleeve ratcheting chuck provides tight bit gripping strength. Ergonomic handle delivers comfort and control. Kit includes: 2 Lithium-Ion batteries, battery charger and convenient bag to carry tool. Ergonomic comfort grip handle provides ideal balance and tool control. Compact (7.52" front to back), lightweight design fits into tight areas. LED light with 20 second trigger release delay provides increased visibility in dark or confined spaces. Weighs only 2.6 lbs. Also included with the Compact Drill/Driver: (2) Li-Ion batteries, (1) charger and (1) kit bag.
Skilsaw SHD77 Worm Drive Corded Circular Saw Milwaukee M12 Cordless Drill/Driver Kit DRILL DRIVER KIT SUB-CMPCT 18V
Die-cast aluminum motor and gear housings for durability. Push button blade lock for easy blade changes and anti-snag lower guard reduces snags. Two position saw hook for safe rafter placement. Oil indicator level and relief bellows. 8' cord length. UL, CSA Certifications.  STANDARD EQUIPMENT: 7-1/4", 24T Carbide blade, blade wrench, saw hook. SPECIFICATIONS: 120V, 15 amp, 7-1/4" blade diameter, diamond arbor, 4,400 no load RPM. Depth of cut at 45 degrees: 1-15/16", Depth of cut at 90 degrees: 2-3/8". Features Powerstate brushless motor which delivers up to 350 in-lbs of peak torque with maximum sustained torque to complete a variety of applications. Redlithium battery technology for superior pack construction, electronics and performance deliver more work per charge and more over pack life. Redlink plus intelligence for optimized performance and overload protection using total system communication between tool, battery and charger. 30 minutes total charge time. Chuck type: 1/2" metal single sleeve - ratcheting lock. Speed: 0-450/0-1,700 rpm. Lightweight and versatile. Kit includes: (1) M12 Fuel 1/2" drill/driver, (1) M12 Redlithium 2.0 compact battery pack, (1) M12 Redlithium XC 4.0 extended capacity battery pack, (1) belt clip and (1) carrying case. Sub-Compact Brushless Cordless Impact Driver Drill is a drilling and driving solution with significantly less weight and is part of a class of compact tools, with the size and weight of lower voltage tools but with the performance, power and compatibility of 18 volt. Efficient brushless motor with two speed settings and dual L.E.D. lights illuminate the work area. Innovative Assist Mode (A-mode) helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins, and is ideal for driving longer fasteners. Ergonomically designed handle with rubberized soft grip provides increased comfort. Ideal for working in tight spaces. Specs: 0-500/0-1,700 RPM, 0-1,600/0-3,900 IPM, 350 in. lbs. maximum torque, 6-3/8" length, and 2.8 lbs. weight. The Kit Includes: 18 volt 1/2" Sub Compact Brushless Driver Drill, 18 volt Lithium-Ion battery, 18 volt charger, and 14" Contractor Tool bag.
DRILL/DRIVER 18V COMPACT KIT  Milwaukee M12 Cordless Impact Wrench DRIVER DRIL CPT 2.0AH BATT 18V
Makita-built 4-pole motor delivers 480 in. lbs. of Max torque. 2 speed transmission (0-600 & 1,900 rpm) for a wide range of drilling and driving applications. Dual L.E.D. lights with afterglow illuminate the work area. Ergonomically designed handle with rubberized soft grip provides increased comfort. Compact design weighs only 3.3 lbs. with battery for reduced operator fatigue. 7-1/4" long. All metal gear construction for increased durability. Ratcheting chuck engineered to prevent bit slippage and improve bit retention. Kit includes: Drill driver, (2) 18V compact Lithium-Ion batteries, (1) rapid charger and a bag. Impact mechanism delivers 1,200 in-lbs of torque. New ergonomic handle design for increased comfort. On-board battery fuel gauge displays remaining run time. 3/8" anvil with friction ring for fast and easy socket changes. No load IPM 0-3,300. Charge time of only 30 minutes. Kit includes (1) M12 3/8" Impact wrench, (2) M12 Red-Lithium batteries, (1) M12 Lithium-Ion battery charger, (1) belt clip and (1) carrying case. Delivers a powerful performance, with 600 in-lbs of torque and two drilling speeds (0-1,700 rpm for high speed and 0-500 rpm for torque). This cordless drill was engineered with a heavy duty chuck that allows for increased robustness and torque transfer, as well as the Bosch Compact Tough design for the shortest head length in class (7.0" long) and a weight of only 3.5 lbs. This is a durable and beefy drill that can power through the toughest materials and has an LED for visibility in hard to see areas. This kit includes: (1) 18 volt Compact Tough 1/2" Drill/Driver, (2) 18 volt 2.0 Ah Lithium Ion SlimPack batteries, (1) 18 volt fast charger, (1) double sided Phillips Drive bit and (1) carrying bag.
WRENCH IMPCT 3-SPD 18V 1/2IN  DRILL/DRVR HAM CDLSS 1/2IN 12V Dewalt DCD780C2 Cordless Drill/Driver Kit
Compact, lightweight design fits into tight areas. High speed transmission delivers 2 speeds for a range of fastening and drilling applications. Ergonomic handle delivers comfort and control. Heavy-duty ratcheting chuck provides superior bit gripping strength. Specs: 20V Max, 350UWO max power, 2000 max rpm, 15 clutch settings and 0-600/0-2000 rpm. Includes two 20V max lithium ion battery packs, 30 minute fast charger, belt hook, on-board bit holder and kit box.
DRILL/DRIVER CRDLS/BRUSHLS 18V Dewalt DCD790D2 Brushless Drill/Driver Kit Milwaukee M18 Cordless Drill/Driver Kit
Brushless motor delivers more run time. XR Li-ion batteries with fuel gauge provide more capacity over standard packs. Compact (7.2" front to back), lightweight (3.5 lb) design fits into tight areas. High speed transmission delivers 2-speed settings (0-600/0-2,000 rpm) improving speed and torque control across a range fastening and drilling applications. Ergonomic comfort grip handle provides ideal balance and tool control. Metal 1/2" ratcheting chuck for superior bit gripping strength. LED light with 20 second trigger release delay provides increased visibility in dark or confined spaces. LED placement on tool foot eliminates chuck shadows. Built with a Milwaukee 4-pole frameless motor, the M18 compact 1/2" drill driver delivers 500 in-lbs of torque and up to 1,800 rpm. At only 7-1/4" length, this drill driver allows you access to the tightest work spaces. Advanced overload protects the tool against abusive situations and provides maximum life. All metal gear case and 1/2" metal chuck provides maximum durability, even on the most challenging worksites. LED light. 30 minutes charge time. Kit comes with (1) M18 compact 1/2" drill driver, (2) M18 Red Lithium compact batteries, (1) M18 & M12 multi-voltage charger and a carrying case.
Dewalt DCD740C1 Right Angle Compact Cordless Drill/Driver Kit HAMMER DRILL 12V 3/8IN BL KIT SCREWGUN DRYWALL 20V MAX XR
Dual speed ranges for increased user flexibility providing a wide range of applications. Compact front to back length allowing users to fit into hard to reach spaces. Multi-grip trigger provides comfort and convenience. Spec: 360 UWO, 2 speed settings, 0-650/0-2000 rpm, 3/8" plastic ratcheting chuck. Includes 20V max 1.5 Ah compact li-ion battery, 30 minute fast charger, belt hook, 2" phillips tip bit and kit box. Compact and ergonomic design at only 6-5/8" long. Weighs only 2.4 lbs. with battery for reduced operator fatigue. BL Brushless motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life. It's also electronically controlled to optimize battery energy use and longer run time per charge. Mechanical 2-speed transmission (0-450 and 0-1,500 rpm) for a wide range of drilling and driving applications. 0-6,750/0-22,500 BPM for fast hammer drilling in masonry materials. 12V slide battery design enables the tool to stand on its own for user convenience. Ergonomically designed handle with rubberized soft grip provides increased comfort. Built-in L.E.D. light illuminates the work area. Convenient 3/8" keyless chuck for quick bit changes. Battery protection circuit protects against overloading, over-discharging and over-heating. 12V max CXT Lithium-Ion 2.0 Ah battery BL1021B, features an integrated L.E.D. battery charge level indicator. Not compatible with 12V max pod-style tools, batteries and chargers. Kit includes: (2) 12 volt max CXT Lithium-Ion 2.0 Ah batteries, (1) 12 volt max CXT Lithium-Ion charger and (1) tool case. Up to 4,400 rpm provides greater speed. Brushless motor delivers maximum run time. Balanced and ergonomic. Nosecone locks on securely and is easily removed while maintaining consistent screw depth. 1/4" hex drive; 8.75" tool length. Weighs only 3.3 lbs. Kit includes: (1) Max XR Li-Ion brushless drywall screw gun, (1) Multi-voltage charger, (2) 20 volt Max XR compact Li-Ion batteries (2.0 Ah) and a handy bag to carry it all.
DRILL/DRIVER KIT 1/2IN 18V    DRILL/DRIVER 1/2IN COMP KIT18V SAW CIRC WORM DRIVE 7-1/4 15A
Brushless motor optimized for efficiency. Provides long run-time and longer tool life. Delivers 500 in-lbs of torque and 0-450/0-1,800 rpm for a wide range of drilling and fastening applications. Compact design provides ideal balance and control. Also ideal for overhead applications or work in tight spaces. All metal gear case and 1/2" metal chuck provide maximum impact and shock durability. RedLink intelligence provides advanced overload protection against abusive applications and monitors the temperature to prevent damage and ensure maximum tool and battery life. RedLithium battery for more work per charge. Weighs only 3.7 lbs with battery. On board fuel gauge on battery. 6-7/8" tool length. Kit includes: (1) M18 1/2" Compact brushless Drill/Driver, (2) M18 RedLithium 2.0 compact battery packs, (1) M18 and M12 Multi-voltage charger and (1) carrying case. Built with a Milwaukee 4-pole frameless motor, the M18 compact 1/2" drill driver delivers 500 in-lbs of torque and up to 1,800 rpm. At only 7-1/4" length, and weighing only 2.9 lbs, this drill driver allows you to access tight work spaces. All metal gear case and 1/2" metal chuck provides maximum durability, even on the most challenging work sites. RedLink intelligence provides advanced protection in abusive situations and manages the tool's temperature to provide maximum life. The RedLithium battery pack delivers more work per charge and more work over pack life. The kit includes (1) M18 Compact 1/2" drill driver (Bare Tool), (2) M18 Compact RedLithium batteries, (1) M18 and M12 Multi-voltage charger (1) measuring tape, (1) 42 piece accessory kit, (1) Milwaukee INZALL marker and (1) carrying case. 15 amp motor provides power for a variety of cutting applications. Features an enormous rearing ration in a compact size. Lightweight magnesium motor housing and foot plate construction reduces user fatigue for less down time. Built-in saw hook allows convenient saw storage between cuts. Feather board multi-function wrench for blade and brush change, lever adjustments and blade diamond center knockout. Accurate depth of cut system allows for quick accurate adjustment. Left side blade design for clarity of cut line. Anti-snag lower guard provides smooth operation for small cut-off pieces. Soft-grip handles for comfort and control. 53? bevel capacity with positive detent stop at 45?. Large adjustment levers for fast, accurate bevel and depth adjustments. Easy access spindle lock for easy blade changes. Includes: (1) 7-1/4" Magnesium Worm Drive, (1) Multi-function blade wrench, (1) carbide blade and (1) built-in saw hook.
Skilsaw SHD77M Magnetic Worm Drive Corded Circular Saw Skilsaw HD5860 Worm Drive Corded Circular Saw TOOL CONNECT DRILL TOOL 20V
Light magnesium housing, impact resistant carbide blade for optimal use, anti snag lower guard, 20 amp switch and heavy gauge cord, die cast aluminum motor and gear housings, push button spindle lock, oil indicator level and relief bellows, aluminum Foot for less user fatigue, two position saw hook, twist lock plug. Specs: 120V, 7 1/4" blade diameter, diamond arbor, UL, CSA certifications, 8 ft. cord, depth of cut at: 90 degrees-2-3/8", 45 degrees-1-15/16", no load 4,400RPM, weighs 14.0lbs. Includes: 24-tooth carbide blade, blade wrench. Die-cast aluminum motor and gear housings. Precision-machined worm drive gears for max. power and durability. Oil indicator level and relief bellows. 22-amp switch and heavy-gauge cord. STANDARD EQUIPMENT: 8-1/4" worm drive skilsaw, blade wrench, 40T combination blade. SPECIFICATIONS: 13 Amp, 120 Volt, 8-1/4" blade diameter, 4,300 No Load RPM, 1-1/2" depth of cut at 60 degrees, 2-1/4" depth of cut at 45 degrees, 2-7/8" depth of cut at 90 degrees. 8' length cord. 18.8 lbs. weight. Pairing the tool with the Tool Connect app enables you to access the last seen location of the device and diagnostics. Brushless motor delivers up to 75 percent more runtime vs. 18V NiCad brushed motors. Dewalt Home mode and 3 programmable modes to customize speed and light brightness. Ergonomic comfort grip handle provides the ideal balance and comfort. Specs: 1/2" chuck, 0-2,000 RPM, 460 UWO max power, 4 speed settings, 3.4 lbs. tool weight. 15 clutch settings. Includes: DCD792 Tool Connect Compact Drill/Driver, (2) Lithium-Ion batteries, charger, and kit box.
Skil MAG77LT Skilsaw Circular Saws Dewalt DW384 Lightweight Corded Circular Saw with Electric Brake Makita DA3010F Right Angle Corded Drill
Lighter magnesium construction, reduces user fatigue for less down time. Cut-Ready depth of cut system helps with quick, accurate depth measurements. 53 degree bevel allows users to complete a wider variety of cuts. A multi-function wrench has a variety of uses for convenience on the job site. 15 amps of power gives users the power to rip through more lumber in less time. Impact resistant carbide blade can withstand challenging cuts. Saw hook provides safe rafter placement. The anti-snag lower guard provides smooth operation for small cut-off pieces. A durable magnesium foot is designed to endure jobsite abuse. Oil lubricated worm drive gears provide ultimate durability and long saw life in addition to quiet running. Soft grip handle for comfort and control. More accessible spindle lock for quick and easy blade changes. 120 volts. 8' cord. Actual weight is 11.5 lbs without blade, cord and wrench. Rear pivot depth of cut adjustment allows your hand to remain behind the tool at all depth of cuts, high torque motor for increased productivity, 50 degree bevel capacity increases range of applications, heavy gauge, high-strength aluminum alloy base for increased durability on worksite, electric brake stops blade after use. Specs: 15Amps, 8-1/4" blade diameter, max watts out 2,075W, no load speed 5,800RPM, bevel capacity 50 degrees, rear pivot, electric brake, depth of cut at:90 degrees- 2-15/16", 45 degrees-2-1/4", weighs 12.75lbs. Includes: carbide tipped blade, blade wrench. Compact, easy use between framing studs or any other close quarter application with variable speed for controlled drilling in wood/metal and speedy fastening, built in shock proof, high output, white LED light illuminates drilling area with a bulb that never needs replacing throughout the life of the tool, paddle switch with speed limiting dial, reduced head height, ball bearing construction. Specs: capacity in: wood-13/16", steel-3/8", no load RPM is 0-2,400, 10-5/8" long, weighs 3.1lbs. Includes: grip complete, chuck key, key holder.
Dewalt DCD785C2 Cordless Hammer Drill/Driver Kit DRYWALL SCREW GUN KIT COMPACT Dewalt DCD795D2  Hammer Drill Kits
Compact, lightweight design fits into tight areas. High speed transmission delivers 2 speeds for a range of fastening and drilling applications. Heavy-duty 1/2" ratcheting chuck with carbide inserts provides superior bit gripping strength. Specs: 350UWO max power, 2 speed settings, 0-600/0-2000 max rpm, 34000 max BPM, 15 clutch settings. Includes (2) 20V Max lithium ion battery packs, 30 minute fast charger, belt hook, on-board bit holder and kit box. The M18 FUEL Drywall Screw Gun is faster than corded models and features AUTO START functionality and delivers up to 3X longer run time than other cordless competitors. The POWERSTATE Brushless motor spins at 4,500 RPM resulting in faster productivity. AUTO START feature automatically starts the motor on contact with drywall providing less noise between screws and 3X longer run time. Includes: M18 Drywall Screw Gun, M18 Red Lithium battery pack, contractor bag, M18 & M12 multi-voltage charger, PR2 bit, and belt clip. Brushless motor delivers more run time. XR Li-Ion battery with fuel gauge provides more capacity. Compact (7.8" front to back), lightweight (3.6 lb) design fits into tight areas. High speed transmission delivers 2-speed settings (0-600/0-2,000 rpm) improving speed and torque control across a range fastening and drilling applications, 0-34,000 BPM for fast drilling in masonry materials. Ergonomic comfort grip handle provides ideal balance and tool control. Metal 1/2" ratcheting chuck for superior bit gripping strength. LED light with 20 second trigger release delay provides increased visibility in dark or confined spaces, LED placement on tool foot eliminates chuck shadows.
COMPACT HAM DRL BASE 20V      Milwaukee 2615-21CT Right Angle Cordless Drill Kit DRILL/DRIVE HAMMER 1/2IN 18V
COMPACT HAM DRL BASE 20V
Our Price: $240.67
Pairing the tool using Bluetooth technology wtih the Tool Connect app enables you to see last seen location of the device and diagnostics. The Brushless motor delivers up to 75 percent more runtime vs. 18V NiCad brushed motors. Ergonomic comfort grip handle provides the ideal balance and comfort. Specs: 1/2" chuck, 0-2,000 RPM, 460 UWO max power, 2 speed settings, 3.6 lbs. tool weight. 15 clutch settings. Includes: DCD792 Tool Connect Compact Hammerdrill, (2) Lithium-Ion batteries, charger, and kit box. Features 3.75" head length, electronic clutch with 11 settings plus drill mode for complete control in fastening applications, extended multi-position handle and built in LED's. SPEC: 0-1500 no load speed, 100 in-lbs torque, multi-position trigger, 30 min charge time and weighs 3.7 lbs. Includes M18 Compact Red Lithium battery pack, 30 minute charger and carrying case. This brushless hammer drill/driver is optimized for efficiency with longer run-time and tool life. Delivers 500 in-lbs of torque and 0-450/0-1,800 rpm for a wide range of drilling and fastening applications. Compact design provides ideal balance and control. Also ideal for overhead applications or work in tight spaces. RedLink Intelligence provides advanced overload protection and defends against abusive applications and monitors the temperature to prevent damage and ensure maximum tool and battery life. RedLithium battery delivers more work per charge. All metal gear case and 1/2" metal chuck provide maximum impact and shock durability. Weighs only 3.9 lbs. On board fuel gauge on battery. 7-3/8" tool length. Includes (1) M18 1/2" compact brushless hammer drill/driver, (2) M18 RedLithium 2.0 compact battery packs, (1) M18 and M12 Multi-voltage charger and (1) carrying case.
DRIVER DRIL W/2 BATT 18V 1/2IN Duraspin 7W0001N Auto-Feed Cordless Screwdriver DuraSpin 2P0001N Cordless Collated Screwdriver
Compact Tough 1/2" Hammer Drill/Driver kit provides a lighter drill with a more compact design but the same driving power as the previous generation. 18 volt canned motor. The tool features a keyless 1/2" auto lock chuck that prevents drill bits from slipping during high torque applications, thanks to high clamping force. It is a powerful tool, with 600 in-lbs of torque and two drilling speeds (0-1,700 rpm for high speed and 0-500 rpm for torque). It also delivers up to 27,000 bpm in hammer mode for masonry. This cordless drill was engineered with the Bosch Compact Tough design for an extremely maneuverable tool with a short head length (7.6" long) and a weight of only 3.5 lbs. It has an electronic motor protection system to protect it from overload. LED for visibility in hard to see areas. Includes (1)18 volt Compact Tough 1/2 Inch Hammer Drill/Driver, (2)18 volt 4.0 Ah FatPack batteries, (1) 18 volt charger, (1) Double sided Phillips Drive Screwdriver bit and (1) carrying bag. Li-Ion auto feed screwdriver. 5000 rpm high speed motor. Corner-fit feed system. Tool-free screw length adjustment. Precise depth of drive adjustment with depth lock. Quick slide button bit change. Variable speed trigger with lock and reverse. Belt hook right or left handed adjustable. Drives #6 - #8, Screw lengths: 1" - 2". Includes (2) 18 volt Li-Ion batteries, (1) charger, (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag and (2) drive bits. High torque motor for heavy-duty applications, jobsite portability, fully integrated (no attachments) design for better balance, smoother operation, and less user fatigue, no more stripped out heads and improved bit life, adjustable depth-of-drive. Specs: 2500RPM, weighs 6.0lbs. Includes: (2) 18 volt Li-Ion batteries, (1) charger, (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag, (1) square bit and (1) Phillips bit.
Dewalt DCD980M2 Drill Kit Milwaukee 3107-6 Right Angle Corded Drill Kit XRP DCD940KX Cordless Drill/Driver Kit
Max XR Premium Lithium Ion batteries offer longer tool run time and enhanced durability. 3 speed all-metal transmission matches the tool to task for fastest application speed and improved run time. Heavy-duty 1/2" metal ratcheting chuck with carbide inserts provides superior bit gripping strength. LED light with 20 second delay after trigger release. High power, high efficiency motor delivers 535 unit watts out of max power for superior performance in all drilling and fastening applications. D-handle right angle drill kit with a powerful 7 amp motor. Delivers trigger speed control in two ranges: 0-335/0-750 rpm plus reverse. Torque offers 1/2" capacity in steel. Heavy duty 1/2" keyed chuck with holder provides an industrial hold during drilling and fastening. Versatile: handles up to a 4-5/8" Self feed bit. Quik-Lok 8 ft 3-wire grounded rubber cord provides easy storage and field replacement. Weighs 10.3 lbs. 120V AC. No load rpm 0-500. This kit includes: (1) 1/2" D-Handle right angle drill, (1) 3/16" socket wrench, (1) 9/16" open end wrench, (1) RAD assembly and (1) side handle. Features extended run-time batteries, 3-speed all-metal transmission, heavy duty ratcheting chuck helps prevent bits from slipping and falling out and LED worklight. High power, high efficiency motor for superior performance in all drilling and fastening applications. Specs: 450UWO max power, 0-500/0-1,250/0-2,000 max rpm, 22 clutch settings and weighs 6.25lbs. Includes one hour charger, two 18V XRP batteries, 360 degree side handle and kit box.
DRIVER DRIL HMER FTPK BATT 18V DRILL STUD/JOIST 60V MAX BARE Dewalt DW120K Right Angle Corded Drill Kit
18 volt EC Brushless Compact Tough 1/2 Inch Hammer Drill/Driver features KickBack control, which reduces the risk of sudden tool reactions in binding conditions. This integrated acceleration sensor automatically shuts the tool down when a potentially dangerous rotational torque reaction occurs in a bind up scenario. Engineered with an upgraded, heavy duty all metal chuck that furnished increased robustness and high torque transfer. With an efficient EC Brushless motor, this drill/driver provides longer tool life as well as great run time. Compact design with a short head length and light weight but plenty of muscle. Delivers a powerful performance with 531 in-lbs of torque, two drilling speeds (0-1,900 rpm for high speed and 0-600 rpm for high torque), an impact rate of 28,500 bpm for masonry applications and 20+1 precision clutch settings for reduced fastener damage. This tool provides an ergonomic grip zone and Bosch's electronic motor protection and Electronic cell protection, to protect the tool and batteries from overload and overheating. Kit includes (1) 18 Volt EC Brushless Compact Tough 1/2" Hammer Drill/Driver, (2) Lithium-Ion FatPack batteries, (1) charger, (1) magnetic bit holder, (1) 4x bit holder, (4) bit tips, (1) belt clip for a more secure hold and (1) carrying bag. The Dewalt 60 Volt Max VSR stud and Joist Drill with E-Clutch system features a 1/2" chuck and brushless motor that provides corded power in a cordless solution. Ideal for plumbers, electricians and HVAC installers who need to drill large diameter holes in wood. This drill provides exceptional power, control, durability and run time with its 60 volt brushless motor, E-Clutch system, mechanical clutch and 2 variable speed ranges. Equipped with the innovative bind up control feature called E-Clutch system this drill increases user control in bind-up/stall situations by sensing a stall during use and managing torque accordingly. Adjustable handle and 2 position side handle for leverage and control. 2 variable speed ranges (0-300/ 0-1250 rpm) to match appropriate speed to the application. E-Clutch is a Perform and Protect feature that detects reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained. Tool length 6.83"; Tool length 16". Designed to provide a high level of one or more of the following; control, dust containment, or low vibration without sacrificing performance. Includes the Cordless Stud and Joist Drill, Chuck key and holder, 2 position side handle and adjustable bail handle. Three speed ranges offer versatility of matching the appropriate speed to the application, right angle drilling and straight drilling, die cast metal gear housing, 5-position side handle, 360 degree right angle attachment, triple gear reduction provides increased torque and reduces gear stress, double insulated, meets OSHA Standards, U. L. Listed. Specs: no load speed is 400/600/900RPM, max watts out is 580W, capacity in: wood (spade bit)-1-1/2", (self-feed)-2-9/16", (hole saw)-4", Wood (auger bit)-1-1/2", in metal: (twist bit)-1/2",  (hole saw)-5", triple gear reduction, weighs 9.75lbs. Includes: chuck key with holder, 5-position side handle, Allen wrench, kit box.
Dewalt DCD985M2 Cordless Hammerdrill Kit Ingersoll-Rand W5130-K1 Cordless Impact Wrench Kit Milwaukee 2602-22 Cordless Hammer Drill/Driver Kit
3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time. Heavy-duty 1/2" metal ratcheting chuck with carbide inserts provides superior bit gripping strength. LED light with 20 second delay after trigger release. High power, high efficiency motor delivers 535 unit watts out of max power for ideal performance in all drilling and fastening applications. DeWalt 20V Max XR premium Lithium Ion batteries offer longer tool runtime and enhanced durability. Ideal for professional service technicians. The 20 volt mid-torque cordless impact wrench delivers the power you need, where you need it. All metal drive train and hammer mechanism. Robust, durable and optimized for maximum power and efficiency. Lightweight, balanced, ergonomic handle with rubber over molded grip minimizes vibration, reduces fatigue and enhances user comfort during extended use. Tough housing protects against fluids, chemicals and repeated drops. Compact and durable motor for optimum performance and long life. Easy to use battery interface makes changing the battery quick and simple. Kit includes: (1) bare tool, (1) 20 volt Lithium Ion 1.5 Ah battery, (1) charger and (1) blow molded case. Milwaukee 4-pole frameless motor features a robust design, combined with rare earth magnets for longer life. 525 in-lbs of torque and 0-400/0-1,800 rpm. All-metal gear case and chuck provide maximum impact and shock durability. Compact design allows greater accessibility in tight work spaces. Red Link intelligence with advanced overload protects the tool against abusive situations and provides maximum life. The kit includes: (1) M18 Compact 1/2" Hammer drill/driver (Bare Tool), (2) M18 Red Lithium XC Extended capacity batteries, (1) M18 & M12 Multi-Voltage charger and (1) carrying case.
WRENCH DRV IMP KIT 18V 1/2INSQ XRP DCD950KX Cordless Hammer Drill/Driver Kit IMPACT WRNCH 3/8IN 20V MAX LED
Variable speed with extended run time batteries provide long run-time and battery life, high power, high efficiency motor delivers max power for superior performance in all drilling and fastening applications, 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time, heavy duty self-tightening chuck tightens throughout operation providing superior bit gripping strength, LED worklight provides increased visibility in confined spaces. Specs: 18V, 450UWO  max power, 3 speed settings, Max RPM 0-500/0-1,250/0-2,000, Max BPM 0-8,500/0-21,250/0-34,000, 22 clutch settings, self tightening 1/2" metal chuck, weighs 6.25lbs. Includes: (1) one hour charger, (2) 18V XRP batteries, 360 degree side handle. kit box. Compact and ergonomic with only 5.5" head length and 2 lbs (Tool Only). Dewalt built brushless motor for increased efficiency and run time. Max torque of 150 ft-lbs in a compact package for a variety of different fastening applications. 3 LEDs and a belt clip for additional ease of use. 3/8" anvil size. No load speed 0-2800. Impacts/min 0-3200 IPM. Kit includes: (1) 20 Volt Max XR 3/8" Compact Impact Wrench Tool, (2) 20 Volt Max XR Lithium Ion batteries, (1) Fast charger, a belt clip and convenient Tool bag.
HAMMERDRILL 3-SPD 20V LI-ION  Hole-Hawg 1675-6 Right Angle Corded Drill HAMMER DRILL KIT 1/2IN
HAMMER DRILL KIT 1/2IN
Our Price: $313.80
DeWalt built high power, high efficiency brushless motor delivers more run time. Heavy-duty 1/2" ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength. LED Spotlight mode features 20 minute shut-off function allowing for extended work time in dark or confined spaces. XR Lithium Ion batteries with fuel gauge provide more capacity over standard packs. 1/2" chuck size. 11 clutch settings. 0-450/0-1300/0-2000 rpm in drill mode; 0-500/0-1500/0-2250 rpm in hammerdrill mode; 0-38,250 bpm for fast drilling in masonry materials. Kit includes: (1) DCD996 20 volt max XR Lithium Ion Brushless Premium 3-speed Hammerdrill, (2) DCB205 20 volt max XR High Capacity Li-Ion batteries (5.0 Ah), (1) Charger, (1) Belt Hook, (1) 360 degree side handle and (1) handy Kit Box. Powerful, yet compact for large hole drilling between joists and studs, two speed ranges increase the versatility of this drill, hi-torque and hi-speed for the heavy duty user with an extra long pipe handle that helps you control the power. Specs: 120AC, no load RPM is 300/1,200, capacity in: wood-(auger bit)-1-1/2", (self-feed bit)-4-5/8", metal (twist bit)-1/2", spindles 5/8"-16, triple gear train, 8 ft. fixed cord, grounded, weighs 11.5lbs. Includes: pipe handle.
Makita LXT Cordless Hammer Drill Kit SAW METAL CUTTING 8IN W/DIABLO WRENCH IMPACT 4.0AH 1/2IN 20V
Brushless motor delivers 1,090 in. lbs. of max. torque. 0-31,500 BPM for fast hammer drilling in masonry materials. Efficient motor is electronically controlled to optimize battery energy use for up to 50 percent longer run time per charge. Eliminates carbon brushes, enabling the brushless motor to run cooler and more efficient for longer life. Variable 2-speed transmission for a wide range of drilling, fastening and hammer drilling applications. All metal gears and gear housing for maximum job site durability. All metal 1/2" self-ratcheting chuck for improved bit gripping strength and durability. Compact and ergonomic design at only 8-1/8" long. Weighs only 5.9 lbs. with battery for reduced operator fatigue. 3-stage L.E.D. gauge indicator battery charge level. Extreme Protection technology for improved dust and water resistance for operation in harsh conditions. Rubberized soft grip provides increased operator comfort. Dual L.E.D. lights illuminate work area. 18 volt LXT Lithium-Ion 4.0 Ah battery provides more run time per charge and reaches a full charge in 40 minutes or less. Equipped with star protection computer controls to protect against overloading, over-discharging and over-heating. Rapid optimum charger has a built-in fan to cool the battery for faster, more efficient charging. Compatible with Makita 18 volt Lithium-Ion batteries with a star symbol. Kit includes: (1) 18 volt LXT BL 1/2" Hammer driver-drill (tool only), (2) 18 volt LXT Lithium-Ion 4.0 Ah batteries, (1) 18 volt Lithium-Ion rapid optimum charger, (1) tool belt clip, (1) depth gauge, (1) XPH07 side handle and (1) tool case. Worm drive gearing optimized for metal. Blade window gives you the ability to make true and accurate cuts. Comes with a large chip tray so you can stay productive. The Diablo Cermet blade cuts quickly and virtually spark-free, with minimal burrs; showing metal no mercy. Weighs 15.4 lbs. 400 ft-lbs of maximum torque to perform a wide range of heavy-duty fastening applications. XR Li-Ion batteries with fuel gauge. Variable speed trigger with electric brake provides user improved control. LED light provides user greater visibility when working in dark environments. Durable magnesium gear case and all metal transmission for extra extended durability. Drive size: 1/2"; 4.0 Ah amps per hour. No load speed: 0-1500 rpm. Tool weighs only 6.8 lbs. Includes fast charger, (2) Li-Ion batteries (4.0 Ah) and kit bag.
XRP DCD959KX Cordless Hammer Drill/Driver Kit WRENCH IMPACT CRDLS/BRSHLS 18V Milwaukee 6370-21 Grounded Corded Circular Saw Kit
Variable speed with extended run time batteries provide long run-time and battery life, 3-speed all metal transmission matches the tool to task application for fastest application speed, heavy duty self tightening chuck tightens throughout operation providing superior bit gripping strength, high power, high efficiency motor delivers max power for superior performance in all drilling and fastening applications. Specs: 18V, 420UWO  max power, 3 speed settings, Max RPM 0-450/0-1,450/0-2,000, Max BPM 0-7,650/0-24,650/0-34,000, 22 clutch settings, self tightening 1/2" metal chuck, weighs 6lbs. (1) one hour charger, (2) 18V XRP batteries, 360 degree side handle. kit box. Faster, cleaner, more affordable metal cutting, durable blade shield with integral chip tank deflects/collects hot chips and sparks, plunge lever for fast, effective plunge cut, exclusive quick release shield latch for fast waste disposal and blade changes, premium cermet tipped blades cut faster, cleaner, and longer than other carbide tipped or friction blades. Specs: Voltage  120 AC; 8" blade, no load speed- 3,700 RPM, spindle-5/8",15 ft. fixed cord, grounded, metal/wood cutting-metal, spindle lock, soft grip handle, blade position-right, depth of cut at: 90 degrees 2-9/16", 6-1/2" long, weighs 13.3 lbs. Includes: hex blade wrench, circular saw blade, carrying case.
Milwaukee M18 Red Lithium REDLINK Plus Cordless Impact Wrench WRENCH IMPACT CRDLSS 1/2IN 20V Super Hawg 1680-21 Right Angle Corded Drill
Cordless 3/8" compact impact wrench. 4-pole frameless motor and optimized impact mechanism, delivers up to 2,450 rpm, 3,350 ipm and 167 ft-lbs of fastening torque for ideal performance. RedLink intelligence provides overload protection using total system communication between tool, battery and charger. LED light to illuminate work surfaces and includes and all metal, reversible belt clip for temporary tool storage. Includes (1) M18 3/8" impact wrench with friction ring, (2) M18 Red Lithium XC extended capacity batteries, (1) M18 & M12 multi-voltage charger, (1) belt clip and carrying case. Up to 700 ft-lbs of max torque and 1200 ft-lbs of max break-away torque. Multi-speed control for a variety of applications (0-400/1,200/1,900 rpm). LED light with 20 second delay for increased visibility. Compact design of 8-13/16" in length and weighs only 7.2 lbs. Included with the Brushless High Torque Impact Wrench with detent pin anvil tool is (1) 5.0 Ah battery and (1) multi voltage charger. Two operating speeds with a clutch in the low gear range, speed shifting is easy, easy turn gear shift knob, comfort grip handle features 3 positions with 90 degree left-right rotation for maximum operator comfort for all applications. Specs: 120A, no load RPM is 450/1,750, low speed clutch, capacity in: wood (self-feed bit)-4-5/8", (hole saw)-6", metal (twist bit)-1/2", spindle  5/8 in.-16, triple gear train, 8 ft. fixed cord, grounded, 22" long, weighs 14.7lbs. Includes: side handle.
Ingersoll-Rand W5350-K1 Cordless Impact Wrench Kit DRILL STD/JST 1/2 VSR 60V MAX 10-1/4IN WD CIRC SAW
10-1/4IN WD CIRC SAW
Our Price: $403.79
180 ft-lbs of torque in a slim, lightweight design that offers the reach of a ratchet while packing the incredible power of an impact. Ideal use for hard to reach jobs, with a head only 2.2" in height, the impact tool can go places other impact wrenches can't. From 0-1900 rpm instantly. With the variable speed trigger for more control and a conveniently located forward reverse switch, you can keep one hand on the trigger and let the tool do the rest. Designed with a steel-lined aluminum hammer case and a super tough nylon housing. Includes: (1) W5350 1/2", (1) BL2012 20 volt 2.5 aH Lithium Ion battery, (1) BC1121 Universal Lithium Ion Charger and (1) case. The 60 volt Max VSR Stud and Joist Drill with E-Clutch system features a 1/2" chuck and brushless motor that provides corded power in a cordless tool. Ideal for plumbers, electricians and HVAC installers who need to drill large diameter holes in wood. This drill provides exceptional power, control durability and runtime with its 60V brushless motor, E-Clutch system, mechanical clutch and 2 variable speed ranges. Equipped with the innovative bind-up control, this drill increases user control in bind-up/stall situations by sensing a stall during use and managing torque accordingly. Adjustable ball handle and 2 position side handle for leverage and control. Metal gear housing for jobsite durability and increased reliability. Larger for cutting 4x cleanly and efficiently in 1 pass. 15 amp dual-field motor designed for more power and durability. Magnesium construction. Keyed blade change. Includes 10-1/4" Diablo blade so you're ready to make perfect cuts right out of the box. Includes blade wrench stored on tool.
Milwaukee 2663-22 Compact Cordless Impact Wrench Ingersoll-Rand W7150-K2 Cordless Impact Wrench Kit DRILL RIGHT ANGLE 18V LITHIUM
Features 4-pole frameless motor and one-handed socket change. Specs: 1/2" square friction ring anvil, 450 ft-lbs torque, 0-1,900 rpm, 02,200 ipm, 8-7/8" length and weighs 6.7 lbs. Includes two M18 XC high capacity Red Lithium batteries, M18 lithium-ion battery charger and carrying case. High impact cordless impact wrench can produce 780 ft-lb reverse torque and 1,100 ft-lb of nut-busting torque. Steel lined aluminum hammer case is designed to be strong and lightweight. Metal reinforced housing keeps your tool in working order even after repeated drops. 9.4" from tip to tail. (2) 20 volt batteries included. Includes: drill with Quik-Lok, M18 Redlithium SX 4.0 extended capacity battery pack, M18 & M12 multi-voltage charger, contractor's bag. Powerstate brushless moter provides constant power under heavy load, 17"L, 8.5Lbs., 0-1,200 RPM. Capacity in wood: auger bits up to 1-1/4" and self-feed bits up to 2".
WRENCH IMPT W/FRCT RG KT 1/2IN KIT HAMMER ROTARY D-HANDLE 1IN KIT HAMMERDRILL 18V 1-9/16IN
High Torque 1/2" Impact Wrench with friction ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts. POWERSTATE brushless motor delivers up to 1,000 ft.-lbs. of fastening torque and 1,400 ft.-lbs. of nut-busting torque. Provides maximum productivity by removing stubborn and high torque fasteners up to 2X faster. 4-mode drive control with bolt removal mode, allowing for ultimate control. 0 to 550/1,400/1,750/1,750-750 RPM and 0-950/1,750/2, 100/2,100 IPM. 4-Mode drive control. REDLINK PLUS intelligence prevents damage to the tool and battery due to overloading or overheating. Premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials. Includes: Impact Wrench, battery, charger and kit box. POWERSTATE brushless motor delivers constant power under heavy load for maximum performance. Mechanical clutch prevents motor burnout if the clutch binds. Variable position chisel stop allows bit to be adjusted regardless of orientation. Integrated LED light illuminates the workpiece for improved visibility. Includes: 1" SDS-Plus D-Handle Hammer, (2) M18 Red Lithium High Demand battery packs, M12/M18 Multi-Voltage charger, and carrying case. FUEL Technology delivers as fast as corded speed, corded durability, and over 20 minutes of continuous chipping on one charge. POWERSTATE brushless motor provides 5 ft.-lbs. of impact energy, 0-450 RPM AND 0-3,000 BPM. AVS Anti-Vibration system minimizes vibration for maximum comfort. Includes: M18 Lithium-Ion 1-9/16" Rotary Hammer, M18 Red Lithium High Demand battery pack, charger, side handle, depth rod, and carrying case.
Makita 5402NA Corded Circular Saw
Electric brake for maximum productivity, low noise level at only 87dB for quiet operation, blade stabilizer for stable blade rotation and cutting performance, depth control lever for convenience and secure adjustments, large support handle for increased operator comfort and control, carbide tipped blade. Specs: 15.0 AMP, 16-5/16" blade diameter, 1" arbor, max cutting capacity: 90 degrees- 6-1/4", 45 degrees-4-3/16", no load 2,200RPM, 1,800 watts out, 24-1/4" long, weighs 32.1bs. Includes: (1) 32 tooth carbide tipped blade, #6 hex wrench, rip fence.
   
 
1