Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > ELECTRIC IMPACT WRENCHES
Sort By:
1
DRILL ELECTRIC VSR 3/8 INCH   Skil 6238-02 Corded Drill Black & Decker DR260B Compact Corded Drill
3/8" (10mm) keyless chuck. Powerful 4.2 amp motor. Variable speed (0-3,000 rpm). Lock-On button; built-in belt clip. Drills through mild steel, hardwood and softwood. Features mid-grip design for balance and control, keyless chuck for fast and easy bit changes, two-finger variable speed trigger for control between low to high speeds. Specs: 6 ft. cord length, max. hole diameter in: hardwood- 3/8"; softwood- 3/4", 120V-50-60Hz, 2,600 no load speed, and weighs 3.2 lbs. Includes carrying bag. Features variable speed reversing for controlled drilling and driving, bubble level, on-board bit storage. Specs: 0-1,500 rpm, capacity in: steel- 3/8", wood- 1". Includes one double ended screwdriving bit and storage bag..
DRILL HAMMER 1/2 INCH         DRILL 3/8 INCH VSR 4.5 AMP    Black & Decker BDCMTI Matrix Cordless Impact Driver Attachment
Powerful 6.0 amp motor, variable speed (0-3300 rpm). Hammer: 0-43,500 BPM. Lock-On button for extended use. Die-cast aluminum gear housing. 360? assist handle. Includes: depth rod, auxiliary handle and chuck key. 3/8" VSR drill with powerful 4.5 amp motor. VSR switch for drilling, driving screws, sanding and many other applications. 0 - 3,000 rpm. Maximum drilling capacity 3/8" in steel; 3/4" in wood. Large trigger with infinite speed control. 3/8" keyless chuck for convenience when changing bits. 10' cord to allow most uses without an extension cord. Weighs 3.96 lbs. Ideal for driving screws,large fasteners such as lag bolts, decking and drilling/driving in tight areas. Impact attachment fits 20 volt Black & Decker cordless drill (Orgill sku 983.7014).
Black & Decker BDEDMT Lightweight Compact Corded Drill Skil 6277-02 Corded Drill Black & Decker DR560 Compact Corded Drill
Quick connect system allows for tool free change of a variety of tool attachments. Powerful 4.0 amp motor provides enough power for a full range of applications and attachments. Compact and lightweight design allows user to carry out drilling/driving tasks in confined spaces and with ease. 11 position clutch provides extra level of control to prevent stripping and overdriving screws. Features variable speed trigger for control of drilling speed, keyless chuck for fast and easy bit changes, built-in level for precise horizontal and vertical drilling, lock-on button for extended drilling and soft grip handle. Specs: 0-2,000 rpm no load speed, 120v. cut capacity in: soft wood-3/4", hardwood-3/8", 6' cord and weighs 3.5 lbs. Includes bit index, double-ended driver bit and carrying bag. For drilling holes through and driving large fasteners in wood, metal and plastic. Features variable speed reversing, all metal gear housing, reversing brush system and 360 degree side handle. Specs: 0-900 rpm, capacity in: steel- 1/2", wood- 1-1/2". Includes side handle, chuck key and holder.
Skil 6445-01 Corded Hammer Drill Hitachi D10VH Lightweight Corded Drill Rockwell RC3136 Corded Hammer Drill
Variable speed trigger lets user control drilling speed, two finger trigger for increased control. Accepts large diameter bits designed for woodworking and cutting, side-assist handle for controlled, accurate drilling, horizontal bubble level for precise drilling and driving. Specs: no load BPM is 51,000, no load RPM is 3,000, 120V/50 -60 Hz. Includes hammer drill, chuck key side and assist handle. Features variable speed reversing dial located in switch, lightweight, compact, maximum torque of 108.1 in-lbs, form fit palm grip with minimal vibration. Specs:  0-2,500 rpm no load speed, 108.1 in-lbs maximum torque, cut capacity in: wood 1", steel 3/8" and weighs 3.1 lbs. Features hammer function for drilling concrete and brick, magnesium gear housing for strength and prolonged life, keyed chuck secures the bit for heavy-duty use and soft grip handle. Specs: 120V/60Hz, 0-2800RPM no-load speed, 0-44800BPM impact rate, max drilling capacity in: wood- 1-1/4", masonry- 1/2", steel- 1/2" and weighs 5 lbs. Includes: 10 ft. cord, auxiliary handle, depth gauge and chuck key.
Porter-Cable PC600D Corded Drill DRIVER IMPACT 12V LITHIUM-ION DRILL ROTARY HAMMER 1/2IN 7A
Belt clip holds drill securely while working. Lock-on button provides easier control during prolonged use. Soft grip handle improves user comfort and control. Specs: 0-2,500 rpm no load speed, 6 ft power cord, variable-speed trigger, anti-slip comfort grip and weighs 3.2 lbs. 708 in-lbs of torque. Torque transfers to the work, not the user. 1/4" hex quick-change locking collet. More power and double the run time of Ni-Cad drivers. Battery holds its charge up to 18 months in storage. Built-in LED work light. Metal belt clip. Electric brake. 12 volt DC motor input. No load speed:0-2,300 rpm, reversible. Charger input: 120v - 60 Hz, with a charging time of 3-5 hrs. Includes (1) battery, charger and (1) #2 Phillips screwdriver bit. 7.0 amp motor delivers the power and durability to complete the toughest drilling applications. 0-3100 rpm. Cast metal gear housing helps dissipate heat from internal components for additional durability. Hammer drill and drill modes provide versatility for drilling into metal, wood, concrete, brick, block and other masonry materials. Two finger locking trigger provides ease of use during extended use. Beats/Min: 52700 bpm. Side handle provides more control in heavy applications and bind up situations. Includes (1) side handle, (1) depth rod, (1) chuck and key holder. Weighs only 4.5 lbs.
Bosch 1006VSR Corded Drill Black & Decker DR670 Corded Hammer Drill Dewalt D21002 Corded Drill
Features variable speed reversing with ratcheting keyless chuck for minimal slipping, lock-on switch recessed in handle to prevent accidental lock-on, soft grip handle, oversized 2-finger trigger, service minder brushes, and sturdy belt clip. Specs: 8 ft. cord length, 0-2,600 no load rpm, 120V ac rating and weighs 3.4 lbs. Variable speed/reversing switch, soft grip handle, reversing brush system and mid-handle design for balance and comfort, ROC hammer technology for high speed masonry drilling, hammer drill or drill mode for masonry, wood or steel drilling, two speed selector, metal gear housing, 360-degree side handle with depth rod. Specs: 0-1,000 and 0-3,000 RPM, 51,000 BPM, cutting capacity: steel- 1/2", 1-1/4 "- wood, 1/2" -concrete.  Includes:  (1) chuck key & holder, side handle, depth rod, kit box. Powerful 7.0 amp motor gives the user the power to get the job done. Compact design allows for user comfort. Lightweight design decreases user fatigue. Variable speed trigger switch gives you greater versatility. Lock-on switch reduces fatigue. No load speed: 0-2,800 rpm. Maximum watts out: 440. Tool weighs only 3.55 lbs. Capacity in wood (spade bit): 1". Capacity in wood (hole saw): 1-1/8". Capacity in steel (twist bit) 3/8". Includes chuck key.
Dewalt DWD112 Corded Drill WRENCH IMPACT KIT 1/2 INCH    Porter-Cable PC700D Corded Drill
Variable speed reversing trigger for versatility in drilling and fastening applications with a soft grip handle and all ball-bearing construction that delivers high performance in heavy-duty applications. All metal ratcheting keyless chuck for greater bit retention. Specs: 650w max watts out, capacity in: wood (spade bit) 1", wood (hole saw) 1-1/8" and steel (twist bit) 3/8", single gear reduction, pistol grip handle, anti-slip grip and weighs 4.1lbs. Quickly tighten and loosen large nuts, bolts and other fasteners. 1/2" square drive , 220 ft-lbs maximum torque. Die-cast aluminum gear housing for durability. Rocker style switch for one-handed operation. Rated power: 120 v; 60 Hz; 7.5 amp; no load speed: 0-2100 rpm. Impacts per minute: 0-2700 IPM. Includes: 4 sockets 11/16", 3/4", 13/16", 7/8" and heavy duty storage case. Triple gear reduction provides torque for demanding drilling applications. Soft grip mid handle provides balance and control. Specs: 0-800 rpm, drilling capacity in: steel- 1/2", wood- 1-1/12", 6 ft power cord, variable speed trigger, anti-slip comfort grip, and weighs 4.8 lbs. Includes cast metal side handle, chuck key and holder.
Milwaukee 0240-20 Right Angle Corded Drill Prograde Pro Corded Hammer Drill Hitachi FDV16VB2 Corded Hammer Drill
Variable speed trigger for fast drilling in wood and metal. All metal gear case provides superior gear support in high torque applications. Soft grip handle and two finger trigger. Specs: Voltage 120 AC only, 0-2800 rpm no load speed, keyless metal chuck, 2-wire 8' cord and weighs 4.25 lbs. Compact and lightweight hammer drill with variable speed control dial, push button reverse switch, one-piece cylindrical housing and aluminum die-cast inner cover and gear cover, oversize trigger switch, elastomer, non-slip grip, removable side handle, 1-1/16" center height that allows better reach into narrow work spaces. Specs: rated power input-590W,0.80HP,  rated power output-310W, 0.42HP, max.power output- 650W, 0.88HP, no load speed 0-2,900/min, no load impact rate 0-46,400/BPM, 111.6in/lbs max. torque, capacity in: concrete-5/8", wood-1", steel 1/2", 10-19/32" long, weighs 3.7lbs. Includes: side handle, depth gauge, injection molded plastic case. Variable speed control dial located on trigger, push button reversing switch, impact to drilling switch, low noise cooling air-flow design, removable side handle, Ball and needle bearing construction for longer tool life, industrial grade keyed chuck, provides greater bit retention, elastomer, non-slip grip. Specs: straight shank, keyed 3-jaw chuck, impact rate is 0-46,400BPM, no load speed is 0-2900RPM, capacity in: concrete-5/8", wood-1", steel-1/2", 2 modes of operation, switch is EVS, reversible, 11-11/32 long, weighs 3.5lbs. Includes: side handle, depth gauge, chuck key, injection molded plastic case.
DRIVER IMPACT LITHIUM-ION 20V Dewalt DWE5010 Hammer Drills Makita 6408K Corded Drill
Compact, lightweight and powerful. Incredible 1062 in-lbs of torque. More power and double the run time of Ni-Cad. Battery holds its charge up to 18 months in storage. 1/4" hex Quick-Change locking collet. Built-in LED work light. On-board battery power indicator. No load speed: 0-2200 rpm, reversible. Impacts per minute: 0-3800. Charger input: 120 v/60 Hz. Weighs only 2.5 lbs. Electric brake. Includes battery, charger and #2 Phillips Impact Driver Bit. Single speed hammer drill. 7.0 amp motor provides high performance and overload protection. Dual mode: hammer drill/drill for wood, steel or masonry applications. Lightweight design for extended use and less user fatigue weighs only 4.3 lbs. Two-finger, rubber trigger for user comfort. 360 degree side handle with depth rod offers greater control, versatility and increased depth accuracy. Variable speed allows for precise hole placement on work surface. Compact design (10.3" length) allows for comfortable use and easy access to tight spaces. Lock-on trigger gives the option to keep the drill running continuously when doing repetitive applications. Features variable speed /reversing for drilling in a wide variety of materials, low decibel rating (79dB). in-line handle, large recessed lock-on button, all-ball bearing construction and large trigger switch. Specs: 0-2,500 rpm no load speed, capacity in: steel- 3/8", wood- 1" and weighs 3.1 lbs. Includes keyless chuck and plastic tool case.
Dewalt DW255 Corded Screwdriver Hitachi D13VF Corded Drill Porter-Cable PC70THD Corded Hammer Drill Kit
Lightweight, variable speed reversing, with depth-sensitive nosepiece for consistent fastener depth, two finger, rubber trigger for increased comfort, hi-speed transmission for production drywall hanging, heat-treated steel gears for long life and durability, excellent ergonomics. Specs: No Load Speed 0-5,300RPM, standard clutch, 60 in/lbs max torque, max fastener size #8, weighs 2.9lbs. Features variable speed control trigger, cast aluminum gear housing, double gear reduction, oversized reversible switch and trigger lock, removable side handle, and belt hook. Designed to fit in hand for improved control with minimal vibration. Specs: 0 to 850 rpm no-load speed, 416 in-lbs max torque, drilling capacity in: wood- 2-9/16", steel- 1/2", hole saw- 4-1/2" and weighs 4.6lbs. Includes chuck key, side handle, handle joint, injection molded carrying case. Dual speed transmissions provides maximum torque in setting one and maximum speed in setting two. Hammer drill and drill modes provides versatility for drilling into metal, wood, concrete, brick, block and many other materials. Cast metal gear housing helps dissipate heat from internal components for additional durability. Includes cast metal side handle, depth rod, chuck key and holder. Specs: 0-1,100 & 0-3,100 rpm, 52,700 bpm, 1/2" capacity in steel, 1-1/4" capacity in wood, 1/2" capacity in concrete, 6' power cord, variable-speed trigger, anti-slip comfort grip and 5.1 lbs weight.
Milwaukee 6742-20 Standard Straight Corded Screwdriver Makita FS4200 Standard Corded Screwdriver Milwaukee 2401-22 Compact Cordless Screwdriver Kit
Variable speed control, ergonomic tactile grip and two finger trigger, ramp off depth locator for easy depth adjustments, all metal gear case and diaphragm, removable belt clip with bit storage, soft grip handle. Specs: 120AC, no loadRPM is 0-4,000, Snap-Action clutch, 1/4" hex drive, max HP  0.9, 10 ft. 2-wire rubber, fixed cord, double insulated, trigger lock, 0.92" spindle offset, 12-3/4" long, weighs 3.5lbs. U.L. Listed. Rental. Includes: belt clip. Large variable speed trigger with lock on button for continuous use, adjustable depth locator and LED light, cast aluminum gear housing,ergonomic grip and bit storage on base. Used in framing and hanging applications. Specs: 0-4,000 no load rpm, 11-1/8" long, weighs 2.9 lbs, 8' standard cord. Includes one each: #2 phillips insert bit and magnetic bit holder. Features variable speed trigger for output power control, quick bit-loading, battery fuel gauge displays remaining run-time, metal gear housing, built in led for illumination of dark work spots and over mold side and grip. Specs: 0-500 rpm no load speed, 175 in-lbs. torque, spindle lock, 14+1 clutch settings, capacity in: steel 1/4", wood 1/2" and weighs 2.0 lbs. Includes: (2) 12V Red Lithium battery packs, 12V charger, and compact driver storage bag.
Dewalt DC825B Cordless Impact Driver Dewalt DW235G Corded Drill Dewalt DW257 All-Purpose Standard Corded Screwdriver
Compact size and weight allows access into tighter areas and perform a wide range of fastening applications, frameless motor, replaceable brushes, textured anti-slip comfort grip, durable magnesium gear case and all metal transmission, heavy duty impacting mechanism. Specs: 18V, 1/4" hex shank quick release, 111 in/lbs torque, 1,330 in/lbs torque, 0-2,400RPM/0-2,700IPM, 5-3/4" long, weighs 2.2 (tool only)lbs. Includes: tool only (batteries and charger sold separately). Variable speed and reversing switch, metal gear housing for jobsite durability, made of helical cut steel, heat treated gears, two finger trigger for increased comfort.  Specs: 0-850 rpm no-load speed, 600 watts maximum output power, 360 degree side handle, double gear reduction. Includes: chuck key with holder. Variable speed reversing, two-finger, rubber trigger for increased comfort, heat-treated steel gears for long life and durability, high torque for deck building, drywall and heavy gauge steel stud framing, depth sensitive nosepiece for consistent fastener depth, excellent ergonomics. Specs: no load speed 0-2,500RPM ,standard clutch, 132 in/bs torque, max fastener size #12, weighs 3.5lbs.
Makita HP1641K Industrial Corded Hammer Drill Kit Hitachi WH10DFL2 Cordless Impact Driver Kit Bosch PS21-2A Compact Cordless Pocket Driver
Lightweight, all ball bearing construction for longer tool life with two modes of operation, hammering with rotation and rotation only, ergonomic handle with rubberized soft grip, extended service life of carbon brushes, recessed lock on button for continuous use. Specs: capacities in: concrete-5/8", steel 1/2", wood-1-3/16", no load RPM 0-2,800, BPM 0-44,800, 11-7/8" long, weighs 4.3lbs. Includes: side handle, depth gauge, keyless drill chuck, plastic case. Powered by Lithium-Ion battery for fade-free power. 955 in/lbs of driving torque for heavy applications like tightening carriage bolts, and sinking deck screws. Drills into wood, metal and concrete. Tightens and loosens small screws, tapping screws, bolts and nuts. Impressively lightweight at only 2.2 lbs and compact at less than 6" in length. Faster impact driving and no-load speed of up to 2,700 rpm and a 3,200 bpm impact rate. Optimized handle for a secure grip and ergonomic comfort in all hand sizes. Free-standing design allows drill to stand on its own when not in use. Balanced tool weight for proper wrist alignment and reduced fatigue. Charger circuitry prevents overheating and power loss. LED light effectively illuminates dark work areas. Quick change 1/4" hex chuck for simple bit replacements. Responsive variable speed trigger for precise control during operation. Kit includes: (2) 12 volt Peak Lithium-Ion batteries, (1) 12 volt Peak 25 minute quick charger, (1) No. 2 driver bit and (1) carrying case. Features a bright LED light. Includes 30 minute charger, (2) lithium-ion 12V max batteries and carrying case. Specs: 5.6" length, 0-350/0-1,300, 12V max rating, 265 in lbs torque and weighs 1.8 lbs.
Milwaukee 5376-20 Corded Hammer Drill Dewalt DW272 Standard Corded Screwdriver Dewalt DW511 Corded Hammer Drill
Equipped with a removable 360 degree side handle that also assists in setting the depth rod for pre-set hole drilling. Metal gear housing. 2-mode operation, hammer drill and drill only modes for concrete, wood, and metal. Over-mold increases grip and reduces user felt vibration. Specs: 0-2,800 no load rpm, 0-48,000 no load bpm, 1-1/4" wood capacity-hole saw, 1/2" metal capacity-twist bit, 5/8" concrete capacity, 8 ft fixed cord type, trigger lock, and weighs 4.9 lbs. Lightweight with variable speed reversing, excellent ergonomics, metal gear housing for jobsite durability and increased reliability, depth-sensitive nosepiece for consistent fastener depth, rubber grip and two-finger trigger for increased comfort and greater control, heat treated steel gears for long life and durability. Specs: no load speed 0-4,000RPM, standard clutch, 81 in/lbs max torque, max fastener size #8, weighs 3.1lbs. Lightweight for extended use with variable speed, dual mode hammerdrill/drill for wood, steel or masonry applications, 360 degree side handle with depth rod, two-finger, rubber trigger. Specs: max watts out 650W, no load speed 0-2,700RPM, blows/Min 0-46,000BPM, capacity in: steel 1/2", wood 1-1/4", concrete optimum 5/32-3/8", 11-1/2" long, weighs 4.3lbs. Includes: side handle, depth rod, chuck key with holder.
IMPACT DRIVER 20VLITH W/1-BATT DRILL HAMMER 2/SPD 8.5A 1/2IN Magnum 0299-20 Corded Drill
Compact and lightweight, yet fast and powerful. LED work light is ideal for dark and enclosed areas. Temperature overload function which shuts unit down automatically if it overheats. Reverse function. No load speed 2500 rpm. 6mm keyless chuck. Worx 20 volt lithium batteries fit a wide range of Worx cordless lawn and workshop tools. Charge time 3-5 hours. Weighs only 2.64 lbs. Features a muscular 8.5 amp motor that handles all masonry drilling applications, delivering a max of 51,000 BPM for muscles and durability. The tool's drilling capacities range from 3/4" for masonry applications to 1-1/2" for wood. The HG 18-2 features a torque control auxiliary handle, which locks into place; the handle has a built-in depth gauge. The dual mode selector easily converts from rotation only to hammer drill mode. A rotating brush plate allows users to easily back out bound-up bits. It has two speed settings, one for high speed and one for high torque. Because of its heavy duty three jaw 1/2" chuck, the tool has a high clamping force that prevents drill bits from slipping. This robust drill has a metal front housing for longer life, a pistol grip handle with soft-grip design and an integral slip clutch for security against recoil. Includes (1) 360? auxiliary handle and (1) depth gauge. Features an all metal gear case and diaphragm, heavy-duty chuck, 360-degree locking side handle, ergonomic textured grip and two finger trigger for user comfort and balance. Specs: 120V AC, 0-850 rpm no load speed, drilling capacity in: wood (auger bit)- 1-1/2", wood (self-feed bit)- 2-9/16", metal (hole saw)- 2", 1/2in-20 spindle, double gear train, 8 ft. fixed 3-wire rubber cord and weighs 5.4 lb. Includes side handle and chuck key with holder.
HAMMER DRV-DRL 18V 1/2IN      Magnum 0300-20 Corded Drill Dewalt DWD210G Corded Drill
HAMMER DRV-DRL 18V 1/2IN
Our Price: $120.54
Features an all metal gear case and diaphragm, heavy-duty chuck, 360-degree locking side handle, ergonomic textured grip and two finger trigger for user comfort and balance. Specs: 120V AC, 0-850 rpm no load speed, drilling capacity in: wood (auger bit)- 1-1/2", wood (self-feed bit)- 2-9/16", metal (hole saw)- 2", 1/2in-20 spindle, double gear train, 8 ft. fixed 3-wire rubber cord, soft grip handle and weighs 5.4 lb. Includes side handle and chuck key with holder. Features a variable speed reversing switch, motor generates 50 percent more power with increased overload protection for added durability, soft grip handle and two-finger trigger, 360 degree locking side handle for greater control and versatility, metal gear housing for jobsite durability and increased reliability. Specs: 980W max watts out, drill capacity in: wood (spade bit) 1-1/2", wood (hole saw) 3-5/8", steel (twist bit) 1/2", wood (self-feed) 2-9/16", wood (auger bit) 1-1/2", steel (hole saw) 2", double gear reduction, handle style pistol grip design, anti-slip grip and weighs 4.9lbs. Includes 360 degree locking side handle with soft grip and chuck key with holder.
Dewalt DCF885B Cordless Impact Driver Magnum 0201-20 Right Angle Corded Drill Milwaukee M12 Cordless Hammer Drill/Driver
Compact design fits into tight areas. Three LED lights with 20 second delay after trigger release, provide visibility without shadows.  One-handed loading hex chuck accepts 1" bit tips. Specs: 0-2,800 rpm no load speed, 0-3,200 ipm, 1,400 in-lbs/117 ft-lbs max torque and weighs 2 lbs. Includes tool only with belt hook. All metal gear case and diaphragm. 360-degree locking side handle. All metal Grip-Lok, 2-sleeve keyless metal chuck. Ergonomic tactile soft grip and 2-finger trigger. Specs: 0-2500 rpm no load speed, capacity in: wood (flat boring bit) 1-1/2", wood (hole saw) 2-1/4", metal (twist bit) 1/2", 3/8in.-24 spindle, double gear train, 10' fixed 2-wire rubber cord, double insulated and weighs 4.1 lbs. Includes side handle. Lightweight and versatile for longer life. Powerstate brushless motor delivers up to 350 in-lbs of peak torque with maximum sustained torque to complete a variety of applications. Redlink plus intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. Runs cooler and quieter with no wearable components. Onboard fuel gauge helps you monitor the charge precisely, so there's less downtime on the job and a built-in LED light illuminates the work surface. All metal ratcheting locking chuck provides maximum grip, bit retention and durability. New contoured soft grip gives you ultimate comfort during prolonged use. Speed 0-450/0-1,700 rpm. 7.75" length.
DRIVER IMPACT CMPCT 1/4IN 20V Dewalt DCF886B Cordless Impact Driver Kit Milwaukee 6790-20 Self Drill Corded Screwdriver
Compact (6.9" length) and lightweight at only 3.3 lbs. Allows the tool to work in tight areas and minimizes user fatigue. Quick release 1/4" hex head chuck for easy 1-handed bit changes. High torque motor delivers 1,450 in-lbs of torque. High performance motor (0-2,800 rpm and 0-3,100 ipm) for quick fastening applications. Battery user gauge displays remaining charge. LED light brightens dark work areas. Includes Impact driver, (2) Li-Ion batteries, (1) charger and (1) storage bag. DeWalt brushless motor delivers more run time. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Tool Only, Battery Not Included. Variable speed control, ergonomic tactile grip and two finger trigger for user comfort and balance, ramp off depth locator for easy depth adjustments, all metal gear case and diaphragm, removable belt clip with bit storage, used for controlled depth fastening. Specs: 120AC, no load RPM is 0-2,500, Snap-Action clutch, 1/4" hex drive, max HP is 0.9, double insulated, switch trigger type, trigger lock, soft grip handle, spindle offset  0.92 in., fixed 10 ft. 2-wire rubber cord, 12-1/8" long, weighs 3.7 lbs. UL listed. Includes: belt clip.
Milwaukee M12 Cordless Impact Driver Kit IMPACT DRIVER BRSHLS 1/4IN 20V Dewalt DW505 Corded Hammer Drill
Milwaukee impact mechanism delivers 1,000 in-lbs of torque. 0-2,500 rpm for increased fastening speed. New ergonomic handle design for increased comfort. On-board battery fuel gauge displays remaining run time. 6-1/2" length. Weighs only 2.3 lbs. Kit contains: (1) M12 1/4" Hex Impact driver, (2) M12 RedLithium battery, (1)M12 Lithium-Ion battery charger, (1) belt clip and (1) carrying case. Brushless motor provides 50 percent more run time. Powerful motor provides 1,400 in-lbs of torque for large fastening applications. Transmission provides 2,700 max rpm's for speed of fastening applications. 1/4" Quick change hex for one handed quick and easy bit changes. Lithium Ion battery. Tool weighs 2.9 lbs. Tool length: 5.8". High/low gear for high speed drilling, or high toque applications. Dual mode for hammerdrill/drill used  in wood, steel or masonry applications. Features two finger, rubber trigger. Specs: 6500W max watts out, 0-1,200/0-2,700rpm no load speed, 0-19,000/0-46,000bpm, capacity in: optimum- 5/32- 3/8", steel- 1-1/2", wood- 1/2" and weighs 4.8lbs. Includes 360-degree locking side handle, steel depth rod, chuck key with holder and kit box.
Milwaukee 5378-21 Corded Hammer Drill Kit Senco 7T0001N Auto-Feed Corded Screwdriver DRIVER IMPACT MODE 3-SPEED 18V
Features variable speed, reversing, two mode selection for hammer with rotation or rotation only, synchronized gear shift, ergonomic soft grip handle, two finger trigger switch, self stop brush system. Specs: 120 AC, 0-1,350/0-2,500rpm no load, 0-20,000/0-40,000 bpm, capacities in: wood- 3-3/4", metal-twist bit- 1/2", concrete- 3/4", self-feed bit- 1-3/4", 10 ft. fixed cord, trigger lock and weighs 6.0 lbs. Includes side handle, depth gauge, chuck key and impact resistant carrying case. 2" corded 5000 rpm auto-feed screwdriver with AC motor. Corner fit feed system. Tool-free screw length adjustment. Precise depth of drive adjustment with depth lock. Quick slide button bit change. Variable speed trigger with lock and reverse. Belt hook right or left handed adjustable. Includes (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag and (1) Phillips bit.
Hitachi WH18DGL Cordless Impact Driver Kit Dewalt DCD950B Cordless Hammer Drill/Driver Kit Milwaukee 5378-20 Corded Hammer Drill
Powerful 1,280 in/lbs of turning torque to handle tough jobs in tight spaces. Powered by Lithium-Ion battery for less weight and fade-free power. Up to 2,400 rpm and 3,200 bpm for maximum driving speed and fastening capabilities. Lightweight design at only 3.1 lbs reduce fatigue during extended or elevated use. LED light effectively illuminates dark work spaces. 1/4" quick-change chuck for quick and simple bit replacements. Responsive variable speed trigger provides complete control during operation. Kit includes: (2) 18 volt Lithium-Ion batteries, (1) 18 volt 35 minute charger, (1) 18 volt Impact driver and (1) carrying case. Variable speed and reversible this drill is compatible with the existing system of DeWalt 18 volt power tools. Heavy-duty 1/2" self tightening chuck tightens throughout operation providing superior bit gripping strength. Three speed all-metal transmission for fastest application speed and improved run time and LED work light. High power, high efficiency motor delivers 450 unit watts for superior performance in all drilling and fastening applications. Specs: max power 450 uwo, (3) speed settings, max rpm 0-500/0-1,250/0-2,000, max bpm 0-8,500/0-21,250/0-34,000, clutch settings 22, chuck type metal, self-tightening, tool weight 3.9 lbs. Includes: Tool only (batteries and charger sold separately), 360 degree side handle. Features variable speed, reversing with dual range speed control, hammer with rotation or rotation only, removable side handle and self-stop brush system. Specs: 120 AC, 0-1,350/0-2,500rpm no load, 0-20,000/0-40,000 bpm  no load, capacities in: concrete- 3/4", metal/twist bit- 1/2", wood- 3-3/4", self-feed bit capacity- 1-3/4", 10ft. fixed cord, trigger lock and weighs 6.0lbs. Includes side handle, depth gauge and chuck key.
Dewalt DCF815S2 Cordless Impact Driver Kit DRIVER HYDRAULIC 1/4IN HEX    Makita HP2050F Corded Hammer Drill
DRIVER HYDRAULIC 1/4IN HEX
Our Price: $145.54
Compact and lightweight with a slim handle and contoured grip, three LED lights that provide visibility without shadows in work areas, a battery that has been placed at the bottom of the handle that allows the tool to stand up between uses. Specs: 950 inch/pounds of torque, 1/4-inch hex chuck that allows users to push the bit in with one hand to lock it in place and accepts 1-inch bit tips and weighs two pounds. Includes one impact driver, two 12 Volt Max Lithium Ion battery packs, one belt clip, one 40 minute, charger, one bit tip, one belt hook and a contractor bag. Brushless motor provides more power, more run-time, and longer life. Electronic Intelligence enables advanced communication between the batteries and tool, allowing for unmatched levels of performance, protection, and productivity. Features SURGE Hydraulic Driver technology and LED light. Weight: 2.3 lbs. Includes: M18 FUEL SURGE 1/4" Hex Hydraulic Driver, Belt Clip and Bit Holder. Drill has variable speed, reversing, built in LED light illuminates drilling edge and increases visibility with a bulb that never needs replacing, two modes, hammering with rotation and rotation only, positive stop mode selector prevents accidental mode disengagement, built in torque limiter, large trigger switch and 360 degree swivel side handle, recessed lock-on button, ball bearing construction, ergonomic shape with rubberized grip, air vent holes supply required ventilation. Specs: capacities in: concrete-3/4", steel (low) 1/2" (high) 5/16", wood-1-9/16", no load RPM (low) 0-1,200 (high) 0-2,900, BPM (low) 0-24,000 (high) 0-58,000, 14-1/4' long, weighs 5.6lbs. Includes: side handle, depth gauge, chuck key, tool case.
HAMMER DRIVER-DRILL 18V 1/2IN Senco 7U0001N Auto-Feed Corded Screwdriver Porter-Cable PCCK640LB Cordless Impact Driver Kit
2" corded 2500 rpm high torque AC motor. Drives: screw diameters #6 - #12, screw lengths: 1" - 2". Variable speed trigger with reverse. Corner access feed system. Tool-free screw length adjustment. Precise depth of adjustment with depth lock. Slide button bit change. Belt hook right or left handed adjustable. Includes: (1) Drywall nosepiece, (1) wood nosepiece, (1) storage bag, (1) square bit and (1) Phillips bit. High torque motor delivers 1,495 in/lbs of torque. High performance transmission (0-2,900 rpm, 0-3,100 bpm) for quick fastening applications. Compact tool (6.2" in length, 3.2 lbs) easily fits in tight spaces and reduces fatigue. Easy load chuck allows user to insert bit with one hand. Battery fuel gauge displays charge remaining in the battery. LED work light provides additional light in dark work areas. 20V Max Lithium Ion batteries with 1.5 amp/hour cells delivers more power and run time in a smaller package. Kit contains: (1) Lithium Ion Impact driver, (2) Lithium Ion compact batteries, (1)Lithium Ion charger, kit box and No. 2 PH Screwdriving bit.
Dewalt DW245 Corded Drill Dewalt DWD215G Corded Drill Milwaukee M12 Cordless Hammer Drill/Driver Kit
Drill has variable speed reversing and is made from helical-cut steel with heat-treated steel gears for long life and durability, metal gear housing for jobsite durability and increased reliability, two-finger, rubber trigger for increased comfort, triple gear reduction, 360 degree side handle. Specs: 0-600rpm no load speed, max watts out 600W, capacity in wood (spade bit) 1-1/2", (hole saw) 4", (self-feed) 2-9/16", (auger bit) 1-1/2", capacity in steel (twist bit) 1/2", (hole saw) 2-3/4", triple gear reduction, handle style pistol grip, weighs 4.4lbs. Includes: 360 degree side handle, chuck key with holder Features variable speed reversing switch for increased versatility, 1/2" all metal single sleeve ratcheting keyless chuck with automatic spindle lock, soft mid handle grip. Specs: 0-1,200 rpm no load speed, 980 W max watts out, drilling capacity in: wood: (spade bit)- 1-1/2", (hole saw)- 3-5/8", (self-feed)- 2-9/16", (auger bit)- 1-1/2", steel: (twist bit)- 1/2", (hole saw)- 2", double gear reduction, anti-slip grip and weighs 5.2 lbs. Includes 360 degree locking side handle with soft grip. Delivers up to 275 in lbs of torque. On-board battery fuel gauge displays remaining run time. New ergonomic handle design for increased comfort. Metal ratcheting chuck for maximum durability offers ideal bit grip, so you won't have to stop for bit re-tightening or lost bits. 7-1/2" overall length and weighs only 2.7 lbs. 30 minutes charge time. Kit includes: (1) M12 3/8" hammer drill/driver, (2) M12 Red-Lithium batteries, (1) M12 Lithium-Ion battery charger, (1) belt clip and (1) carrying case.
DRILL HAMMER CDLSS 1/2IN 20V  Magnum 0234-6 Corded Drill Milwaukee M12 Cordless Impact Driver Kit
Compact size (7-3/4" length) and lightweight at only 3.5 lbs. Allows tool to work in tight areas and minimize user fatigue. High performance motor delivers 330 unit watts out. 2 speed gear box (0-400/0-1,600) delivers the power needed to complete large and small applications. LED light brightens dark work areas. Metal ratcheting chuck minimizes bit slipping in chuck. Battery gauge displays charge remaining in the battery. Kit includes: (1) Drill driver, (2) Lithium Ion compact batteries, (1) Lithium Ion charger, (1) Double-ended bit tip and (1) Kit box. Features trigger speed control, reversing, a Quik-Lok cord that can be removed from drill for storage or service replacement, brush cartridge system with a set of spare brushes.  Specs: 120v AC, 0-950rpm no load speed, capacity in: wood (auger bit) 1-1/2", (self feed bit)  2", metal (hole saw)  2", 1/2 in.-20 spindle, double gear train, 8ft cord, grounded, trigger lock and weighs 4.8 lbs. Includes side handle, chuck key with holder. Hex impact driver kit delivers maximum performance in a compact size. Provides extended motor life, more runtime and proprietary drive control. Brushless motor with constant power output, yet runs cooler with no wearable components. Red Lithium 2.0 compact battery pack. M12 Fuel impact driver offers fastening speed. Compact weight and size allow access to tighter areas and reduce user fatigue. The built-in LED light illuminates work surfaces in dark work spots. Includes a 12 volt lithium-ion battery charger. Kit includes (1) M12 Fuel 1/4" hex impact driver (2453-20), (2) M12 Redlithium 2.0 compact battery pack (48-11-2420), (1) M12 Lithium-ion battery charger (48-59-2401), (1) belt clip and (1) carrying case.
Senco 7V0001N Auto-Feed Corded Screwdriver Dewalt DWD520K Corded Hammer Drill Kit DRIVER IMPACT 1/4IN
DRIVER IMPACT 1/4IN
Our Price: $170.56
2" corded 2500 rpm high torque AC motor. Corner fit feed system. Variable speed trigger with lock and reverse. Tool-free screw length adjustment. Sliding screw guide. Precise depth of drive adjustment with depth lock. Quick slide button bit change. Belt hook right or left handed adjustable. Includes (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag, (1) square bit and (1) Phillips bit. Generates 50 percent more power with increased overload protection for added durability. Dual mode for versatility in masonry, wood, or steel drilling applications. Features two speed range, high speed or high torque, soft grip handle, two finger trigger and metal gear housing. Specs: 980W max watt out, 0-1,200/0-3,500rpm no load speed, 0-56,000bpm, capacity in: steel- 1/2", wood- 1-1/2", concrete optimum 5/32-7/16", 14" long and weighs 6.0lbs. Includes 360 locking side handle, steel depth rod, chuck key with holder and kit box.
Makita DP4000 Lightweight Corded Drill Makita DS4011 Corded Drill Makita HR2475 Corded Rotary Hammer Drill
Reversible, variable speed. Retractable belt clip, ergonomic rubberized grips, large trigger switch, comfortable side handle rotates 360 degrees, all ball and needle bearing construction, brushes are easily accessible, double insulated. Specs: capacity in:  steel 1/2", wood 1-1/2"; 0-900 RPM no load speed, weighs 4.8 lbs. Includes: chuck key, side handle. Powerful motor engineered for improved drilling and mixing performance; provides increased speed and torque for drilling large holes, balanced for reduced operator fatigue. D-handle rotates 360 degrees with 24 positive stops for multi position operation. Specs: AMPS (120V), capacities in wood: (auger bit 1-7/16"), (self feed-2-9/16"), (hole saw-5"), in steel: (twist bit) 1/2", (hole saw) 3", no load speed 600 RPM, overall length  13-3/8", weighs 6.3 lbs. Includes: (1) 1/2" spade handle drill, (1) drill chuck, (1) chuck key, (1) side handle and On-board chuck key storage for fast and convenient bit changes. Variable speed with 3-Mode operation rotation only, hammering with rotation and hammering only, ergonomic D-shaped handle with rubberized soft grip, accepts SDS-PLUS bits, one touch sliding chuck, built-in torque limiter, 'No hammering when idling' function, extended service life of carbon brushes, recessed lock on button, 40 different bit angle settings. Specs: 7AMP, impact energy is 2.7 ft./lbs., no load BPM is 0-4,500, no load RPM is 0-1,100, capacity in: concrete 1", steel-1/2", wood-1-1/4", 16-7/8" long, weighs 6.6lbs. Includes: (1) rotary hammer, (1) 360 degree auxiliary handle, (1) depth gauge, (1) carrying case. Includes: (1) rotary hammer, (1) auxiliary handle, (1) depth gauge, (1) plastic tool case.
DRIVER IMPCT BRSHLS SB-CPT 18V DRIVER IMPACT COMPACT 18V     Bosch HD21-2 Duel Corded Hammer Drill
DRIVER IMPACT COMPACT 18V
Our Price: $179.48
Sub-Compact Brushless Cordless Impact Driver is a fastening solution with superior comfort and handling and is part of a class of compact tools, with the size and weight of lower voltage tools but with the performance, power and compatibility of 18 volt. Efficient brushless motor with two speed settings and dual L.E.D. lights illuminate the work area. Innovative Assist Mode (A-mode) helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins, and is ideal for driving longer fasteners. Ergonomically designed handle with rubberized soft grip provides increased comfort. Specs: 1/4" Hex shank, 0-1,300/0-3,000 RPM, 0-1,600/0-3,900 IPM, 1,240 in. lbs. maximum torque. 5-5/16" length, and 2.6 lbs. weight. The Kit Includes: 18 volt 1/4" Brushless Impact Driver, 18 volt LXT battery, 18 volt charger, and 14" Contractor Tool bag. Makita 4-pole motor with 4 brush design delivers more rpm without decreasing torque. Variable speed (0-2,900 rpm and 0-3,500 ipm) and 1,460 in lbs. of torque for a wide range of fastening applications. All metal gear housing for increased job site durability. Compact and ergonomic design at only 5-3/8" long. Weighs only 2.8 lbs. with battery for reduced operator fatigue. Convenient one-touch 1/4" hex chuck for quick bit changes. Ergonomically designed handle with rubberized soft grip provides increased comfort. Dual L.E.D. lights with afterglow illuminate the work area. Makita's proprietary hammer and anvil impact mechanism is manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power. Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions. 18V compact Lithium-Ion 2.0 Ah battery 1820B, features and integrated L.E.D. battery charge level indicator, provides up to 50 percent more run time per charge, reaches full charge in 25 minutes or less and is compatible with 18V LXT tools. Equipped with Star Protection computer controls to protect against overloading, over-discharging and overheating. Rapid Optimum charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. The charger has a built-in fan to cool the battery for faster more efficient charging. Kit Includes: (2) 18 volt LXT Lithium-Ion compact 2.0 AH batteries, (1) 18 volt Lithium-Ion Rapid Optimum charger and (1) tool case. Dual-mode selector converts from rotation only to hammer drill mode. Ergonomic pistol-grip handle. Integral slip clutch helps minimize torque reaction. Features rotating brush plate, metal gear housing and 2 speeds. Specs: 3-jaw chuck, max hole in: concrete- 7/8", wood- 1-5/8", metal- 5/8", 0-900/0-3000 no load rpm, 0-18000/0-54000 no load bpm, 13.5" long and weighs 10.9 lbs. Includes 360-degree auxiliary handle, depth gauge and carrying case.
Dewalt DW293 Corded Impact Wrench Milwaukee 5262-21 Corded Rotary Hammer Kit Dewalt DW292 Corded Impact Wrench
Ball bearing construction for increased durability with variable speed reversing,  AC/DC forward/reverse rocking switch, oft grip handle. Specs: no load speed 2,100RPM, 345 ft/lbs max torque , impacts/min 2,700IPM, 11-1/4" long,  weighs 7.0lbs. Meets OSHA Standards. U. L. Listed. Features a lightweight design to provide ease of use and reduce user fatigue. Mechanical clutch protects tool when bit binds up. 3-mode operation: rotary hammer, hammer only and rotation only. Variable position chisel stop allows steel to be adjusted for work in any orientation. Specs:1.8 ft-lbs impact energy, 0-1,500 no load rpm, 0-5625 no load bpm, 10 ft cord length, double insulated, D-handle style, 2-1/2" thin wall core bit capacity, and weighs 5.8 lbs. Ball bearing construction for increased durability with variable speed reversing,  AC/DC forward/reverse rocking switch, oft grip handle. Specs: no load speed 2,100RPM, 345 ft/lbs max torque , impacts/min 2,700IPM, 11-1/4" long,  weighs 7.0lbs. Meets OSHA Standards. U. L. Listed.
Dewalt DCF885C2 Cordless Impact Driver Kit DRILL HAMMER SDS1IN PISTOL GRP DRILL HAMMER 1IN SDS ROTARY
Compact (5.5" front to back), light weight design fits into tight areas. Three LED lights with 20 second delay after trigger release, provide visibility without shadows. One-handed loading 1/4 hex chuck accepts 1" bit tips. Spec: 1/4in drive size, 2800rpm no load speed, 3200ipm, 1400in-lbs max torque, 117ft-lbs max torque. Includes (2) 20v Max lithium ion 1.5 Ah battery packs, 30 minute fast charger, belt hook and kit box. Pistol grip hammer drill. 2.6 Joules of impact energy for fast drilling and chipping speed. 8.0 amp high performance motor. Rotating brush ring delivers full speed/torque in forward and reverse. Integral clutch reduces sudden, high torque reactions if bit jams. No load speed: 0-1500 rpm. Variable speed switch. Tool length: 13.25"; Tool weight: 5.8 lbs. Kit includes 360 degree side handle, depth rod and kit box. 2.8 joules of impact energy for fast drilling and chipping speed. Shocks - active vibration control, reduced vibration felt in the handles. 8.0 amp high performance motor. Rotating brush ring delivers full speed/torque in forward and reverse. Integral clutch reduces sudden, high torque reactions if bit jams. Variable speed switch. No load speed 0-1500 rpm. Tool length: 16.75"; Tool weight: 6.6 lbs. Includes 360 degree side handle, depth rod and kit box.
DRILL/DRVR HAM CDLSS 1/2IN 12V Makita HP2070F Corded Hammer Drill DRIVER IMPACT CRDLS/BRSHLS 18V
Drill has variable speed, conveniently located reverse slide switch, built in LED light illuminates drilling edge and increases visibility with a bulb that never needs replacing, two modes, hammering with rotation and rotation only, positive stop mode selector prevents accidental mode disengagement, built in torque limiter, large trigger switch and 360 degree swivel side handle, recessed lock-on button, ball bearing construction, ergonomic shape with rubberized grip, air vent holes supply required ventilation. Specs: capacities in: concrete-3/4", steel (low) 5/8" (high) 5/16", wood (low)-1-9/16" (high) 1", no load RPM (low) 0-1,200 (high) 0-2,900, BPM (low) 0-24,000 (high) 0-58,000, 14-1/4' long, weighs 5.6lbs. Includes: side handle, depth gauge, chuck key, tool case.
Milwaukee 9072-20 Corded Impact Wrench Dewalt DW268 Corded Screwdriver Milwaukee 5387-22 Corded Hammer Drill Kit
Pin-detent system to securely retain sockets or adapters, and AC-only variable speed reversing switch with speed setting dial, ergonomically shaped handle with a soft cushioned grip, light weight. Specs: 120AC, anvil  1/2" pin detent, 300 ft/lbs  peak torque, no load RPM is 600-1,800, no load IMP is 1,000-2,600, trigger  switch, soft grip, socket retention  flat end detent pin, 10 ft. Quik-Lok2-wire cord, 11-5/8? long, weighs 6.0lbs. Includes: carrying case. High power motor for metal fastening applications. Helical-cut steel, heat-treated gears for smooth operation and longer life. Rubber-grip and two-finger trigger for increased comfort. Versa-clutch torque adjustment system to dial the proper torque needed to efficiently drive fasteners without stripping or breaking fastener. High power motor for increased durability and longer life. Metal nose and gear case for durability on the job. Designed for steel stud framing, general framing decking/phillips screws and self-drilling hex head screws. SPECIFICATIONS: 6.5 amp motor, 0-2,500 RPM, 132 in. lbs. torque, #14 max. fastener. 3.2 lbs. tool weight. Motor provides overload protection. Metal gear case can withstand daily jobsite abuse. Lightweight balanced design reduces operator fatigue. Dual speed motor optimized for concrete fastening. Specs: 120 AC, 0-16,000/0-40,000 bpm no load, 0-1,000/0-2,500 rpm no load speed, capacity in: steel- 1/2", concrete- 3/4", 10 ft. Quik-Lok cord, and weighs 6.4 lbs. Includes side handle, depth gauge, chuck key and carrying case.
Dewalt DCF886D2 Brushless Cordless Impact Driver Kit Bosch 25618-02 Cordless Impact Driver Kit HAMMER DRILL 12V 3/8IN BL KIT
DeWalt brushless motor delivers more run time. XR Li-Ion batteries with fuel gauge provides more capacity. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back), lightweight (2.9 lbs) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Belt hook included for portability. Variable speed trigger, 1/4" hex drive with Quick Release, high performance motor and all metal gears, hammer and anvil system, increased maneuverability in tight spaces and extended comfort, built-in LED light, spring loaded impact mechanism that reduces user fatigue, externally accessible brushes. Specs: 18V, 1/4" hex drive, impact rate is 0-3,200, no load speed is 0-2,800RPM/3200BPM, 1,500 in/lbs max torque, 5.7" long, weighs 3.3lbs. Includes: (2) 18V, Litheon slimpack batteries, (1) 60-minute Litheon battery charger, (1) double-ended Phillips bit , (1) belt clip, (1) carrying case. Compact and ergonomic design at only 6-5/8" long. Weighs only 2.4 lbs. with battery for reduced operator fatigue. BL Brushless motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life. It's also electronically controlled to optimize battery energy use and longer run time per charge. Mechanical 2-speed transmission (0-450 and 0-1,500 rpm) for a wide range of drilling and driving applications. 0-6,750/0-22,500 BPM for fast hammer drilling in masonry materials. 12V slide battery design enables the tool to stand on its own for user convenience. Ergonomically designed handle with rubberized soft grip provides increased comfort. Built-in L.E.D. light illuminates the work area. Convenient 3/8" keyless chuck for quick bit changes. Battery protection circuit protects against overloading, over-discharging and over-heating. 12V max CXT Lithium-Ion 2.0 Ah battery BL1021B, features an integrated L.E.D. battery charge level indicator. Not compatible with 12V max pod-style tools, batteries and chargers. Kit includes: (2) 12 volt max CXT Lithium-Ion 2.0 Ah batteries, (1) 12 volt max CXT Lithium-Ion charger and (1) tool case.
Bosch 11255VSR Bulldog Rotary Hammer Drills Dewalt DW130V Corded Drill DRIVER IMPCT KIT HEX 1/4IN 18V
HammerHook allows quick tool storage during the job. 0-1,300 rpm; 0-5,800 bpm. Multi-function selector provides 3 modes of operation: rotation only, rotary hammer and hammer-only mode. Vario-Lock positioning rotates and locks chisel into 36 different positions to optimize working angle. Rotating brush plate provides equal power in forward and reverse. Cord Turret 35" pivot for added flexibility and longer cord life. SDS-plus bit system tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. D-handle design is ideal for overhead and downward drilling applications. Variable speed reversing trigger for accurate bit starting as well as removing fasteners or bound bits. Integral clutch helps minimize torque reaction. Features variable speed reversing switch avoids air bubbles when mixing mud and offers greater control when drilling. Specs: 600 watts max power output, 0-550 rpm no-load speed, triple gear reduction, drilling capacity in: wood (spade bit) 1-1/2", wood (self-feed) 2-9/16", wood (hole saw) 5", wood (auger bit) 1-1/2", steel (twist bit) 1/2", steel (hole saw) 3" and weighs 7.5 lbs. Includes 3 position side handle, 2-position rear spade handle chuck key and holder. Brushless motor optimized for efficiency, longer run-time and longer tool life. Delivers 1,500 in-lbs of torque and 0-2,800 rpm for a wide range of fastening applications. Compact design provides ideal balance and control. Also ideal for overhead applications or work in tight spaces. RedLink intelligence provides advanced overload protection against abusive applications and monitors the temperature to prevent damage and ensure maximum tool and battery life. RedLithium battery pack delivers more work per charge and more work over battery pack life. Weighs only 3.1 lbs. On board fuel gauge on battery. 5-3/8" tool length. Kit includes (1) M18 1/4" Hex brushless impact driver, (2) M18 RedLithium 2.0 compact battery packs, (1) M18 and M12 Multi-voltage charger and (1) carrying case.
Senco 6Y0011N Auto Feed Collated Corded Screwdriver IMPACT DRIVER 1/4IN 20V       Makita TW0350 Corded Impact Wrench
IMPACT DRIVER 1/4IN 20V
Our Price: $220.53
For sheathing, subflooring, underlayment, cement board, fencing, and wood or composite decking. Drives screws from 5/8" to 3" in lengths. Use stand-up mode for horizontal surfaces or hand-held for vertical surfaces. "Feed-on-return" functionality. Use screw gun with or without extension or drive loose screws with nose cone. Fast depth-of-drive adjustment. Includes auto-feed attachment, extension pole (for standing applications), adjustable handle, toe-nail nose piece (installed), no-mar nose piece, #2 Phillips, #2 square bits, rex drive bits and  nylon storage bag. Specs: 4000 RPM. Pairing the tool with the Tool Connect app enables you to access the last seen location of the device and diagnostics. Brushless motor delivers up to 75 percent more runtime vs. 18V NiCad brushed motors. Includes a Dewalt Home mode and 3 programmable modes to customize speed and light brightness. Specs: 1/4" Quick Release Hex Shank, 3,250 RPM, 4 speed settings, 1,825 In.-Lbs. max torque, 5.3" length, 2.8 Lbs. weight. Includes: DCF888 Too Connect Impact Driver, (2) Brushless Lithium Ion batteries, charger, and kit box. Greater impact power for framework, curtain walling or structural steel framing with 47 percent larger, more efficient hammer, rocker switch provides easy forward and reversing. Specs: capacities: standard bolt M12-M22, high tensile bolt M12-M16, square drive 12.7mm, impacts/minute is 2,000IPM, continuous rating input is 400W, no load speed is 2,000RPM, max. fastening torque 350Nm, weighs 2.9kg, 2m power supply cord, carbon brush. Included: standard-socket, carry case.
Milwaukee M18 Cordless Impact Driver Kit Dewalt DCD785C2 Cordless Hammer Drill/Driver Kit Milwaukee 1660-6 Compact Corded Drill
Milwaukee 4-pole frameless motor. Features a robust design for longer life, more power and more run time. Delivers maximum power and application speed for greater efficiency on the job. RedLink intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. Proprietary 2-mode drive control. Two speed/torque modes. 1/4" hex quick connect chuck. Red Lithium battery delivers more work per charge. Delivers up to 2,750 rpm, 3,450 ipm and 1,500 in-lbs of fastening torque for ideal performance. LED light to illuminate work surfaces and includes an all metal, reversible belt clip for temporary tool storage. 5-1/2" length and weighs only 3.1 lbs. Charge time 30 minutes. Kit includes (1) M18 2-speed 1/4" hex impact driver, (2) M18 Red Lithium compact batteries, (1) M18 & M12 Multi-voltage charger, (1) belt clip and carrying case. Compact, lightweight design fits into tight areas. High speed transmission delivers 2 speeds for a range of fastening and drilling applications. Heavy-duty 1/2" ratcheting chuck with carbide inserts provides superior bit gripping strength. Specs: 350UWO max power, 2 speed settings, 0-600/0-2000 max rpm, 34000 max BPM, 15 clutch settings. Includes (2) 20V Max lithium ion battery packs, 30 minute fast charger, belt hook, on-board bit holder and kit box. Extra long handles, two handed operation for large hole drilling or material mixing, 450 rpm operating speed, for large bits or any hi-torque application. Heat treated gears are helical-cut for quiet performance. Specs: voltage  120 AC , wood capacity: (auger bit) 1-1/2", (hole saw) 4", metal capacity (twist bit)  1/2", spindle  5/8 in.-16, triple gear train, 8 ft. fixed cord, grounded, weighs 11.4 lbs. Includes: pipe handle, chuck key, flexible key holder.
Dewalt DCD795D2  Hammer Drill Kits COMPACT HAM DRL BASE 20V      Senco 6Y0012N Auto Feed Collated Corded Screwdriver
COMPACT HAM DRL BASE 20V
Our Price: $240.67
Brushless motor delivers more run time. XR Li-Ion battery with fuel gauge provides more capacity. Compact (7.8" front to back), lightweight (3.6 lb) design fits into tight areas. High speed transmission delivers 2-speed settings (0-600/0-2,000 rpm) improving speed and torque control across a range fastening and drilling applications, 0-34,000 BPM for fast drilling in masonry materials. Ergonomic comfort grip handle provides ideal balance and tool control. Metal 1/2" ratcheting chuck for superior bit gripping strength. LED light with 20 second trigger release delay provides increased visibility in dark or confined spaces, LED placement on tool foot eliminates chuck shadows. Pairing the tool using Bluetooth technology wtih the Tool Connect app enables you to see last seen location of the device and diagnostics. The Brushless motor delivers up to 75 percent more runtime vs. 18V NiCad brushed motors. Ergonomic comfort grip handle provides the ideal balance and comfort. Specs: 1/2" chuck, 0-2,000 RPM, 460 UWO max power, 2 speed settings, 3.6 lbs. tool weight. 15 clutch settings. Includes: DCD792 Tool Connect Compact Hammerdrill, (2) Lithium-Ion batteries, charger, and kit box. Drives flexible strips of 50 screws from a standing position, or remove the extension for close-up work. Capable of working with or without the extension pole. Easy depth-of-drive screw adjustment. Quick release for easy bit access. Flooring extension snaps on and off. Kit includes: 2,500 rpm screwdriver, 1/2"-3" auto-feed attachment, 21" extension pole, nylon storage bag, adjustable handle. "No-mar" nose piece, #2 Phillips, #2 square, and hex drive bit (specialized head configuration). Weighs 7.0 lb with extension and 5.5 lb without extension.
Milwaukee 2653-22CT Cordless Impact Driver Kit DRIVER IMPACT HEX CP KIT 1/4IN DRILL/DRIVE HAMMER 1/2IN 18V
Features a Powerstate Brushless motor. Redlink Plus allows operator to choose between 3 fastening modes: Mode #1 for precision work (0-850 RPM, 200 in-lbs of torque), Mode #2 helps prevent damage to fasteners and material (0-2,100 RPM, 700 in-lbs of torque) and Mode #3 delivers maximum performance for the toughness application (0-2,900 RPM, 1600 in-lbs of torque). Specs: 1600 in-lbs peak torque, 0-2,900 max rmp, 0-3,600 max ipm, M18 and M12 multi-voltage charger, fuel gauge on battery, LED light and weighs 3.0 lbs with battery. Includes two M18 Redlithium compact capacity battery packs, 30-minute multi-voltage charger, belt clip and carrying case. This brushless hammer drill/driver is optimized for efficiency with longer run-time and tool life. Delivers 500 in-lbs of torque and 0-450/0-1,800 rpm for a wide range of drilling and fastening applications. Compact design provides ideal balance and control. Also ideal for overhead applications or work in tight spaces. RedLink Intelligence provides advanced overload protection and defends against abusive applications and monitors the temperature to prevent damage and ensure maximum tool and battery life. RedLithium battery delivers more work per charge. All metal gear case and 1/2" metal chuck provide maximum impact and shock durability. Weighs only 3.9 lbs. On board fuel gauge on battery. 7-3/8" tool length. Includes (1) M18 1/2" compact brushless hammer drill/driver, (2) M18 RedLithium 2.0 compact battery packs, (1) M18 and M12 Multi-voltage charger and (1) carrying case.
Makita HP2010N Corded Hammer Drill Duraspin 7X0001N Auto-Feed Cordless Screwdriver DRIVER DRIL HMER FTPK BATT 18V
Variable speed switch, 2-speed gear change, depth gauge, all ball and needle bearings for long tool life, adjustable side handle, double insulated. Specs: capacity in: concrete-(high) 1/2" (low)-3/4", steel-(high) 1/4"  (low)-1/2" , wood-(high)-3/4" (low)-1-1/2", no load RPM (high) 0-2,300 (low) 0-900, BPM (high) 0-46,000 (low) 0-18,000, 13-3/4" long, weighs 6.4lbs. Includes: drill chuck, chuck key, side handle, depth gauge, steel tool case. 2500 rpm high-torque motor. Corner-fit feed system. Tool-free screw length adjustment. Precise depth of drive adjustment with depth lock. Quick slide button bit change. Variable speed trigger with lock and reverse. Belt hook right or left handed adjustable. Includes (2) 18 volt Li-Ion batteries, (1) charger, (1) drywall nosepiece, (1) storage bag and (2) drive bits. 18 volt EC Brushless Compact Tough 1/2 Inch Hammer Drill/Driver features KickBack control, which reduces the risk of sudden tool reactions in binding conditions. This integrated acceleration sensor automatically shuts the tool down when a potentially dangerous rotational torque reaction occurs in a bind up scenario. Engineered with an upgraded, heavy duty all metal chuck that furnished increased robustness and high torque transfer. With an efficient EC Brushless motor, this drill/driver provides longer tool life as well as great run time. Compact design with a short head length and light weight but plenty of muscle. Delivers a powerful performance with 531 in-lbs of torque, two drilling speeds (0-1,900 rpm for high speed and 0-600 rpm for high torque), an impact rate of 28,500 bpm for masonry applications and 20+1 precision clutch settings for reduced fastener damage. This tool provides an ergonomic grip zone and Bosch's electronic motor protection and Electronic cell protection, to protect the tool and batteries from overload and overheating. Kit includes (1) 18 Volt EC Brushless Compact Tough 1/2" Hammer Drill/Driver, (2) Lithium-Ion FatPack batteries, (1) charger, (1) magnetic bit holder, (1) 4x bit holder, (4) bit tips, (1) belt clip for a more secure hold and (1) carrying bag.
Dewalt DCD985M2 Cordless Hammerdrill Kit Bosch RH328VC Corded Rotary Hammer Milwaukee 2602-22 Cordless Hammer Drill/Driver Kit
3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time. Heavy-duty 1/2" metal ratcheting chuck with carbide inserts provides superior bit gripping strength. LED light with 20 second delay after trigger release. High power, high efficiency motor delivers 535 unit watts out of max power for ideal performance in all drilling and fastening applications. DeWalt 20V Max XR premium Lithium Ion batteries offer longer tool runtime and enhanced durability. Variable speed 3 finger trigger, SDS-Plus tool-free bit changes, 3 modes of operation, rotation only, rotary hammer and hammer only mode, vario-lock positioning rotates and locks chisel into 36 different positions, padded rear handle, 360 degree auxiliary handle with built-in depth gauge, integral clutch, double insulated, UL listed, complies to OSHA. Specs: 120V, impact energy is  2.6 ft./lbs., optimal concrete capacity range: 1/4"-7/8",max. hole diameter in: concrete-1-1/8", concrete-thin wall core bit-3", steel-1/2", wood-1-1/4", no load BPM 0-3,900, no load RPM 0-850 ,  weighs 9.3lbs., 12' cord, 15-1/4" long. Includes: (1) rotary hammer, (1) auxiliary handle, (1) depth gauge, (1) carrying case Milwaukee 4-pole frameless motor features a robust design, combined with rare earth magnets for longer life. 525 in-lbs of torque and 0-400/0-1,800 rpm. All-metal gear case and chuck provide maximum impact and shock durability. Compact design allows greater accessibility in tight work spaces. Red Link intelligence with advanced overload protects the tool against abusive situations and provides maximum life. The kit includes: (1) M18 Compact 1/2" Hammer drill/driver (Bare Tool), (2) M18 Red Lithium XC Extended capacity batteries, (1) M18 & M12 Multi-Voltage charger and (1) carrying case.
XRP DCD950KX Cordless Hammer Drill/Driver Kit DRIVER IMPACT SCKT RDY W/2BATT Hitachi WR18DSDL Cordless Impact Wrench
Variable speed with extended run time batteries provide long run-time and battery life, high power, high efficiency motor delivers max power for superior performance in all drilling and fastening applications, 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time, heavy duty self-tightening chuck tightens throughout operation providing superior bit gripping strength, LED worklight provides increased visibility in confined spaces. Specs: 18V, 450UWO  max power, 3 speed settings, Max RPM 0-500/0-1,250/0-2,000, Max BPM 0-8,500/0-21,250/0-34,000, 22 clutch settings, self tightening 1/2" metal chuck, weighs 6.25lbs. Includes: (1) one hour charger, (2) 18V XRP batteries, 360 degree side handle. kit box. The 18 V EC Brushless 1/4" and 1/2" socket ready impact driver delivers result, with the socket ready adapter that has a 1/4" hex and 1/2" square drive in one tool. Performance control system provides three speed and torque settings for maximum effectiveness. The tool is powered by a hassle free EC brushless motor. The hammer and anvil system that delivers maximum impact endurance, and the tool provides superior ergonomics, with the smallest grip diameter in the class. The impact driver kit includes (1) 18 volt EC brushless 1/4" and 1/2" Socket Ready Impact Driver, (2) 18 volt Lithium Ion long lasting 4.0Ah FatPack batteries, (1) 18 volt charger, (1) double ended bit, (1) belt clip and (1) soft bag. Powered by Lithium Ion slide-type battery technology for fade free power, less weight and longer battery life. Industrial grade 2-piece motor with up to 188 ft-lbs of torque to handle the toughest jobs. 1/2" square drive for quick and easy socket replacement. Two-step power switch to alternate between full power and power saving modes. Metal belt hook keeps the tool close at hand. Bright LED light for increased visibility in enclosed workspaces. Externally accessible carbon brush for quick and easy maintenance. Lightweight at only 3.7 lbs. Cross compatible with all other Hitachi slide type 18 volt battery systems. Includes: (2) Lithium Ion 3.0 Ah slide type batteries (330067), (1) rapid Lithium slide battery charger (UC18YRSL) and (1) carrying case (330592).
Dewalt DCF886M2 Cordless Impact Driver Kit Dewalt DCF885M2 Cordless Impact Driver Kit HAMMERDRILL 3-SPD 20V LI-ION
DeWalt brushless motor delivers more run time. XR Lithium-Ion batteries (2) with fuel gauge provides more capacity. Charger included; 45 minute charge time. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back), lightweight (3.4 lbs) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Belt hook included for portability. XR Li-Ion batteries with fuel gauge provides more capacity. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back), lightweight (3.4 lbs) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Belt hook included for portability. DeWalt built high power, high efficiency brushless motor delivers more run time. Heavy-duty 1/2" ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength. LED Spotlight mode features 20 minute shut-off function allowing for extended work time in dark or confined spaces. XR Lithium Ion batteries with fuel gauge provide more capacity over standard packs. 1/2" chuck size. 11 clutch settings. 0-450/0-1300/0-2000 rpm in drill mode; 0-500/0-1500/0-2250 rpm in hammerdrill mode; 0-38,250 bpm for fast drilling in masonry materials. Kit includes: (1) DCD996 20 volt max XR Lithium Ion Brushless Premium 3-speed Hammerdrill, (2) DCB205 20 volt max XR High Capacity Li-Ion batteries (5.0 Ah), (1) Charger, (1) Belt Hook, (1) 360 degree side handle and (1) handy Kit Box.
Hitachi WH18DSDL Brushless Cordless Impact Driver Kit HAMMER DRILL KIT 1/2IN        Makita LXT Cordless Hammer Drill Kit
HAMMER DRILL KIT 1/2IN
Our Price: $313.80
Lithium Ion slide-type battery technology for fade free power, less weight and longer battery life. Industrial grade 2-piece motor with up to 1,510 in-lbs of torque to handle the toughest jobs. 1/4 inch Hex quick-change chuck for quick and easy bit replacement. Two-step power switch to alternate between full power and power saving modes. Metal belt hook keeps the tool close at hand. Bright LED light for increases visibility in enclosed work spaces. Externally accessible carbon brush for quick and easy maintenance. Lightweight at only 3.7 lbs. Cross compatible with all other Hitachi slide type 18 volt battery systems. Includes: (2) Lithium Ion 3.0 Ah slide type batteries (330067), (1) rapid Lithium Ion slide battery charger (UC18YRSL) and (1) carrying case (323230). Brushless motor delivers 1,090 in. lbs. of max. torque. 0-31,500 BPM for fast hammer drilling in masonry materials. Efficient motor is electronically controlled to optimize battery energy use for up to 50 percent longer run time per charge. Eliminates carbon brushes, enabling the brushless motor to run cooler and more efficient for longer life. Variable 2-speed transmission for a wide range of drilling, fastening and hammer drilling applications. All metal gears and gear housing for maximum job site durability. All metal 1/2" self-ratcheting chuck for improved bit gripping strength and durability. Compact and ergonomic design at only 8-1/8" long. Weighs only 5.9 lbs. with battery for reduced operator fatigue. 3-stage L.E.D. gauge indicator battery charge level. Extreme Protection technology for improved dust and water resistance for operation in harsh conditions. Rubberized soft grip provides increased operator comfort. Dual L.E.D. lights illuminate work area. 18 volt LXT Lithium-Ion 4.0 Ah battery provides more run time per charge and reaches a full charge in 40 minutes or less. Equipped with star protection computer controls to protect against overloading, over-discharging and over-heating. Rapid optimum charger has a built-in fan to cool the battery for faster, more efficient charging. Compatible with Makita 18 volt Lithium-Ion batteries with a star symbol. Kit includes: (1) 18 volt LXT BL 1/2" Hammer driver-drill (tool only), (2) 18 volt LXT Lithium-Ion 4.0 Ah batteries, (1) 18 volt Lithium-Ion rapid optimum charger, (1) tool belt clip, (1) depth gauge, (1) XPH07 side handle and (1) tool case.
Milwaukee 2653-22 Cordless Impact Driver Kit XRP DCD959KX Cordless Hammer Drill/Driver Kit SCREW GUN COLLATED DECK SYSTEM
Features a Powerstate Brushless motor. Redlink Plus allows operator to choose between 3 fastening modes: Mode #1 for precision work (0-850 RPM, 200 in-lbs of torque), Mode #2 helps prevent damage to fasteners and material (0-2,100 RPM, 700 in-lbs of torque) and Mode #3 delivers maximum performance for the toughest application (0-2,900 RPM, 1600 in-lbs of torque). Specs: 1600 in-lbs peak torque, 0-2,900 max rmp, 0-3,600 max ipm, M18 and M12 multi-voltage charger, fuel gauge on battery, LED light and weighs 3.6 lbs with battery. Includes two M18 Redlithium XC high capacity battery packs, one-hour multi-voltage charger, belt clip and carrying case. Variable speed with extended run time batteries provide long run-time and battery life, 3-speed all metal transmission matches the tool to task application for fastest application speed, heavy duty self tightening chuck tightens throughout operation providing superior bit gripping strength, high power, high efficiency motor delivers max power for superior performance in all drilling and fastening applications. Specs: 18V, 420UWO  max power, 3 speed settings, Max RPM 0-450/0-1,450/0-2,000, Max BPM 0-7,650/0-24,650/0-34,000, 22 clutch settings, self tightening 1/2" metal chuck, weighs 6lbs. (1) one hour charger, (2) 18V XRP batteries, 360 degree side handle. kit box. Expanded depth settings for high-density flooring materials. Reversible and replaceable non-skid teeth. Uniform toe-nailing and countersink on slick surfaces. Sure-grip guide tube increases stability for a broad range of screws. Uses include: Decking on decks and docks, subfloor to wood or steel, wall plates, stair treads, sheathing and fiber-cement siding to steel. Includes: (1) PRO300S Decking attachment, (1) extension for stand-up driving, (1) Quiver for keeping screws at your fingertips, (1) decking nose clip, (1) DeWalt, Makita or Milwaukee screwdriver motor and (1) tool case.
Hitachi DH38YE2 Corded Rotary Hammer HAMMER ROTARY SDS 1-9/16IN    Dewalt D25553K Combination Corded Rotary Hammer Kit
HAMMER ROTARY SDS 1-9/16IN
Our Price: $416.98
Two modes of operation, hammer only and hammer drilling, low vibration levels, 18.8m/s2 (full load), low noise levels of only 95.2 dB (full load), safety clutch shuts down rotation in the event of a bound bit, dust proof cover, auto-stop carbon brushes, sealed grease system, soft elastomer handle, adjustable 360 degree side handle. Specs: full-load speed is 510RPM, full-load impact is 2,800BPM, solid bit capacity is 1-1/2", core bit capacity is 4-1/8", 16-11/32" long, weighs 14.1 lbs. Includes side handle, dust cover, depth stopper and case. Two modes of operation, hammer only and hammer drilling. Designed to take on a variety of tasks including drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods. Features large change lever, oversize trigger switch, soft over-molded handle, and 360 degree side handle. Specs: Vibration Level 16.5m/sec2, No Load Speed 620/RPM, Impact Rate 2,800/BPM, Impact Energy 6.3ft/lbs., Drill Bit Capacity: 1-9/16", Core Bit Capacity: 4-1/8", Weight: 15.6lbs. Includes: side handle, depth stopper rod, grease and carrying case. Motor provides high performance and overload protection while impact energy provides fast drilling and powerful chipping, rear handle mount for increased user comfort in down drilling applications, factory set clutch reduces sudden, high torque reactions if bit jams, trigger lock on, rubber grip. Specs: 120V/AC, optimal concrete drilling-3/8-1-1/4", 8.0 ft-lbs of impact energy, no load speed 490 RPM, blows/min 3300 BPM, length 18.6", weight 13.5lbs. Includes: side handle, carrying case.
Bosch 11264EVS Corded Rotary Hammer KIT HAMMER ROTARY D-HANDLE 1IN KIT HAMMERDRILL 18V 1-9/16IN
Variable speed dial, vibration reduction in the hammer mechanism and the grip area provides maximum user comfort for extended periods of work, maintains speed under load and overload protection, delivers 20 percent more power in hammer only mode, rotates and locks chisel into 12 different positions, service light indicates when preventative maintenance is required, cord turret reduces cord wear. Specs: impact energy (ft. lbs.) 7.4 Ft. Lbs./8.1 (turbo), 18" long, max. hole dia. in: concrete-1-5/8", concrete-core bit-4-1/8", no load  BPM is 1,700-2,900, no load  RPM is 170-340, 120V, weighs, 15.1lbs. Includes: (1) 360 degree auxiliary side handle with depth stop, (1) carrying case. POWERSTATE brushless motor delivers constant power under heavy load for maximum performance. Mechanical clutch prevents motor burnout if the clutch binds. Variable position chisel stop allows bit to be adjusted regardless of orientation. Integrated LED light illuminates the workpiece for improved visibility. Includes: 1" SDS-Plus D-Handle Hammer, (2) M18 Red Lithium High Demand battery packs, M12/M18 Multi-Voltage charger, and carrying case. FUEL Technology delivers as fast as corded speed, corded durability, and over 20 minutes of continuous chipping on one charge. POWERSTATE brushless motor provides 5 ft.-lbs. of impact energy, 0-450 RPM AND 0-3,000 BPM. AVS Anti-Vibration system minimizes vibration for maximum comfort. Includes: M18 Lithium-Ion 1-9/16" Rotary Hammer, M18 Red Lithium High Demand battery pack, charger, side handle, depth rod, and carrying case.
   
 
1