Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > CORDLESS SCREWDRIVERS
Sort By:
1
Black & Decker AS6NG Cordless Screwdriver Black & Decker LI2000 Cordless Screwdriver SCREWDRIVER 3.6V LITHIUM W/LED
Spindle lock for manual use if desired and for greater control when starting and finishing screws. Forward/reverse slide switch for easy screwdriving and screw removal. Rubber grips provide comfort and control. Narrow nose piece for extended reach in tight places. Specs: 130 RPM, 20 in/lbs of torque An inline grip and compact design makes this 4 volt Max cordless rechargeable screwdriver ideal for tackling a variety of household tasks. Comfortable to use and fits in tight spaces. 180 rpms and 35 in-lbs of torque provide plenty of power for a variety of applications. 3.6 volt Lithium screwdriver, 180 rpm provides good speed with 35.6 in. lbs of torque. Built-in LED light for visibility inside cabinets, closets or outside after dark. Compact size and very light weight at 1.06 lbs. Includes USB charger and screwdriver bit.
Black & Decker LDX172C Cordless Drill/Driver SCREWDRIVER 7.2V LITHIUM-ION  SCREWDRIVER 4V STORAGE W/8BITS
Mid-handle design for balance and control. Fan-cooled motor extends drill life. Lithium battery is integrated into the drill. Specs: 60 in-lbs torque, 550 rpm, and weighs 2.77 lbs. Includes charger and double ended bit. Lithium-Ion battery for more power and run time. Holds a charge up to 18 months. 1/4" Hex quick-change chuck. Two speeds (200/400 rpm) for versatility. 16 torque/clutch settings. Built-in LED work light. Battery charge level indicator. Torque: 46 in-lbs. Battery capacity: 1300 mAh. Recharging time: 3-5 hours. Adaptor: UL listed. Includes: charger, (4) quick-change hex-shank drill bits and (4) screwdriver bits. On-board eight-bit storage plus long lasting Lithium power keeps it all ready at your fingertips making screw driving tasks quicker and easier. From assembling furniture and toys to hanging photos on your walls, on-board bit storage plus cordless convenience helps you finish in a flash.
SmartSelect LI4000 Cordless Screwdriver Rockwell WX252L  Cordless Screwdrivers DRILL/DRIVER VSR 18V
This 4 volt Max rechargeable cordless screwdriver is powerful and convenient. Compatible with most micro USB chargers. Features magnetic bit storage and an LED light to illuminate work surfaces. 180 rpm motor; 40 in-lbs torque. Pistol grip for access into tight areas. Extended reach screwdriver allows for reaching in tight spots. 4 volt lithium 1.5 Ahr battery. 36 in lbs of torque. LED light. Forward and reverse switch. Includes 6 bit tips and a 5 hour charger. Weighs only 1.1 lbs. 3/8" keyless chuck; 16 torque/clutch settings. Variable speed; 0-550 rpm reversible. Electric brake. LED work light. Includes Ni-Cad battery, charger, 13 piece drill/driver bit set and storage case.
DRILL HAMMER 1/2 INCH         Black & Decker LDX112C Cordless Drill/Driver DRILL/DRIVER 12V L-ION 2-SPEED
Powerful 6.0 amp motor, variable speed (0-3300 rpm). Hammer: 0-43,500 BPM. Lock-On button for extended use. Die-cast aluminum gear housing. 360? assist handle. Includes: depth rod, auxiliary handle and chuck key. For drilling and screwdriving through wood, metal and plastic. LED work light illuminates the surface for drilling in dark places. Soft grip handle provides added comfort during use. Specs: 11 position clutch, 100 in-lbs torque, 0-600 rpm and weighs 3.5 lbs. Includes 12 volt lithium ion battery, charger and double-ended bit. Compact, lightweight and powerful 250 in-lbs of torque. 0-350, 0-1300 rpm speed ranges, reversible. Built-in LED work light. 3/8" single-sleeve keyless chuck. Includes Lithium-Ion battery, charger and double-ended screwdriver bit.
SCREWDRIVER 4VLITH W/SCREWHOLD Rockwell SS2504 Cordless Drill/Driver Kit Skil 6445-01 Corded Hammer Drill
Screw holder attachment holds screws firmly in place for one-handed operation and easy access to hard to reach spaces. Rapid reloadable cartridge allows you to store 6 bits in the tool; eliminating lost bits and time spent looking for them. Advance the correct bit with a simple slide action; no more fumbling around with small bits. Front mounted LED light means no more working in the dark. Powerful 4 volt MaxLithium battery holds a charge for up to 18 months. Side-mounted switch allows you to operate in reverse and the rubber handle provides a comfortable grip. No load speed of 230/min. Charging time only 5 hours. 1/4" hex chuck size. Weighs only 1.1 lbs. Includes Worx Screwdriver with screw holder, 1 reloadable cartridge with 6 bits (PH1, PH2, SL4, SL6, SQ1 and SQ2) and a 4 volt MaxLithium charger. Lithium drill/driver with 18 plus 1 clutch settings. 0-700 rpm; 110 in lbs of torque. Weighs only 2.1 lbs. Includes 3-5 hour charger and (1) 12 volt Lithium battery. Also includes a built in LED work light that is activated by the drill trigger. The 3/8" keyless chuck allows for easy bit changes. Variable speed trigger lets user control drilling speed, two finger trigger for increased control. Accepts large diameter bits designed for woodworking and cutting, side-assist handle for controlled, accurate drilling, horizontal bubble level for precise drilling and driving. Specs: no load BPM is 51,000, no load RPM is 3,000, 120V/50 -60 Hz. Includes hammer drill, chuck key side and assist handle.
Rockwell RC3136 Corded Hammer Drill DRILL ROTARY HAMMER 1/2IN 7A  Black & Decker BDCDMT120 Lightweight Cordless Drill
Features hammer function for drilling concrete and brick, magnesium gear housing for strength and prolonged life, keyed chuck secures the bit for heavy-duty use and soft grip handle. Specs: 120V/60Hz, 0-2800RPM no-load speed, 0-44800BPM impact rate, max drilling capacity in: wood- 1-1/4", masonry- 1/2", steel- 1/2" and weighs 5 lbs. Includes: 10 ft. cord, auxiliary handle, depth gauge and chuck key. 7.0 amp motor delivers the power and durability to complete the toughest drilling applications. 0-3100 rpm. Cast metal gear housing helps dissipate heat from internal components for additional durability. Hammer drill and drill modes provide versatility for drilling into metal, wood, concrete, brick, block and other masonry materials. Two finger locking trigger provides ease of use during extended use. Beats/Min: 52700 bpm. Side handle provides more control in heavy applications and bind up situations. Includes (1) side handle, (1) depth rod, (1) chuck and key holder. Weighs only 4.5 lbs. Cordless drill with matrix quick connect drill attachment. Compact and lightweight design allows you to carry out drilling/driving tasks in confined spaces with ease. Lithium Ion battery holds a charge for up to 18 months. 20 volts; 0-800 rpm; 10 clutch settings and 3/8'' chuck size. Drill includes double sided bit tip, 20v max power unit, drill/driver attachment, 20v max battery and charger.
Black & Decker DR670 Corded Hammer Drill Black & Decker LDX120C Cordless Drill/Driver Black & Decker GCO18SFB Cordless Drill
Variable speed/reversing switch, soft grip handle, reversing brush system and mid-handle design for balance and comfort, ROC hammer technology for high speed masonry drilling, hammer drill or drill mode for masonry, wood or steel drilling, two speed selector, metal gear housing, 360-degree side handle with depth rod. Specs: 0-1,000 and 0-3,000 RPM, 51,000 BPM, cutting capacity: steel- 1/2", 1-1/4 "- wood, 1/2" -concrete.  Includes:  (1) chuck key & holder, side handle, depth rod, kit box. Use for drilling and screwdriving through wood, metal and plastic. LED work light illuminates the surface for easier drilling in dark places. Compact and lightweight. Specs: 115 in-lbs torque, 650 rpm, 11 clutch settings and weighs 4.25 lbs. Includes: drill/driver, 20V max lithium ion charger, 20V max lithium ion battery, 2" double ended bit tip and storage bag. Drill has variable speed reverse for drilling and driving control, keyless chuck makes bit changing quick and simple, 24 position clutch prevents screws from stripping, 0-750 RPM, soft grips for comfort, slide pack battery provides easy installation and removal of the battery. Stud sensor detects studs through walls up to 3/4" thick. Includes cordless drill with stud sensor, (1) battery pack, (1) DC plug charger and storage bag.
Rockwell RC2804K2 Cordless Drill/Driver DRILL/DRIVER LITHIUM-ION 20V  Rockwell SS2800 Cordless Drill/Driver
Variable speed, 15 clutch positions plus drilling mode to easily dial in the correct torque required for the job. Ergonomic soft grip handle for improved comfort, battery capacity indicator clearly displays the status of the battery, LED light increases visibility. Specs: 0-600 rpm no load speed, 135 in-lbs max torque, 15+1 clutch positions, 3-5 hr charging time and weighs 3.7 lbs. Includes charger, (2) Ni-Cd batteries, (2) double ended bits and carry bag. Compact, lightweight and powerful. More power and double the run time of Ni-Cad drills. Battery holds its charge up to 18 months in storage. High performance motor produces up to 350 in-lbs of torque. Two variable speed ranges for versatility. Electric brake. Built-in LED work light. On-board battery power indicator. 3/8" (10mm) single sleeve keyless chuck. 21+1 torque/clutch settings. Includes battery, charger and double ended screwdriver bit. Specs: 200 in lbs of torque, 2 speed gear box that allows for high torque or high speed applications, 0-350 rpm/0-1,250 rpm, 16 position clutch, LED light, battery charge indicator and weighs 2.8 lbs. Includes a 18V lithium battery and 3 to 5 hour charger. Free Batteries For Life.
HXP DB3DL2 Adjustable Inline Dual Speed Cordless Screwdriver Kit Prograde Pro Corded Hammer Drill Dewalt DWE5010 Hammer Drills
Reversing trigger switch, compact and lightweight fits easily into tight spaces, 21-Stage clutch, integrated LED lights work areas, Bit Lock  for fast and easy bit changes, adjustable 2-position handle, non-slip elastomer grip. Specs: 44 in/lbs torque, no load speed 200/600 RPM, 1/4" hex chuck,1.5Ah Lithium Ion batteries, 30 min. charging time, weighs 0.9lbs. Includes: 3.6V HXP 1.5Ah Lithium Ion batteries, charger, and case. Compact and lightweight hammer drill with variable speed control dial, push button reverse switch, one-piece cylindrical housing and aluminum die-cast inner cover and gear cover, oversize trigger switch, elastomer, non-slip grip, removable side handle, 1-1/16" center height that allows better reach into narrow work spaces. Specs: rated power input-590 Watts, 0.80 HP, rated power output-310W, 0.42HP, max power output- 650W, 0.88HP, no load speed 0-2,900/min, no load impact rate 0-46,400/BPM, 111.6in/lbs max torque, capacity in: concrete-5/8", wood-1", steel 1/2", 10-19/32" long, weighs 3.7lbs. Includes: side handle, depth gauge and plastic case. Single speed hammer drill. 7.0 amp motor provides high performance and overload protection. Dual mode: hammer drill/drill for wood, steel or masonry applications. Lightweight design for extended use and less user fatigue weighs only 4.3 lbs. Two-finger, rubber trigger for user comfort. 360 degree side handle with depth rod offers greater control, versatility and increased depth accuracy. Variable speed allows for precise hole placement on work surface. Compact design (10.3" length) allows for comfortable use and easy access to tight spaces. Lock-on trigger gives the option to keep the drill running continuously when doing repetitive applications.
Hitachi FDV16VB2 Corded Hammer Drill Porter-Cable PCC601LA Cordless Drill/Driver Kit VACUUM WALL MOUNT WET/DRY 5G
Variable speed control dial located on trigger, push button reversing switch, impact to drilling switch, low noise cooling air-flow design, removable side handle, Ball and needle bearing construction for longer tool life, industrial grade keyed chuck, provides greater bit retention, elastomer, non-slip grip. Specs: straight shank, keyed 3-jaw chuck, impact rate is 0-46,400BPM, no load speed is 0-2900RPM, capacity in: concrete-5/8", wood-1", steel-1/2", 2 modes of operation, switch is EVS, reversible, 11-11/32 long, weighs 3.5lbs. Includes: side handle, depth gauge, chuck key, and plastic case. High performance motor delivers 283 units watts out, with a 2 speed gear box (0-350/0-1500 rpms). 1/2" keyless chuck for fast and easy bit changes. LED light brightens dark work areas. Compact (8.25" long) and lightweight (3.5 lbs). Includes: (1) Drill/Driver, (1) 1.3 aH battery and (1) charger. Utility Vacuum is the perfect centralized cleaning for garage, work shop, hobby area, laundry room or anywhere a hands free vacuum center is desired. 6' cord length. Includes 18' x 1/2" LockOn hose, (2) 1/2" extension wands, 12" floor nozzle, dual service nozzle, gulper nozzle, crevice tool, a round brush, adaptor, tool storage bag with wall hook, wall bracket, small cartridge filter, foam sleeve filter and filter bag.
DRILL/DRV CORDLESS 20V 3/8IN  Richpower PAVC101 Corded Ash Vacuum Porter-Cable PC70THD Corded Hammer Drill Kit
Drive more screws flush the first try with the Lithium cordless drill that powers through wood, metal and plastic. AutoSense technology means you'll have less stripped screws, less work surface damage and ideal accuracy. Eliminates the guesswork with a cutting-edge electronic clutch that automatically stops when a screw is in place.  An LED light illuminates work surfaces for easier drilling in dark places. Compact and versatile. Lithium Ion battery is always ready, holds a charge up to 18 months. Active depth control for precise adjustments. 0-800 rpm. Includes: (1) 20 volt max Drill/Driver, (1) 20 volt Max Lithium-Ion battery, (1) charger and (1) double ended bit. Specifically designed to clean warm and cool ash out of fireplaces, wood stoves, pellet stoves and barbecue grills. The washable, replaceable and fire resistant 2-layer filter system, together with the heat-resistant metal hose and metal canister, withstands high temperature and prevents fire hazards. A layer of micro filter catches the finest ash and dust. Canister holds up to 3 gallons of ashes. Powerful but quiet 10 amp motor with a noise level less than 79 db. Additional accessories, casters and a 16 foot cord allow use as a regular shop vacuum. Can also be used as a blower. Dual speed transmissions provides maximum torque in setting one and maximum speed in setting two. Hammer drill and drill modes provides versatility for drilling into metal, wood, concrete, brick, block and many other materials. Cast metal gear housing helps dissipate heat from internal components for additional durability. Includes cast metal side handle, depth rod, chuck key and holder. Specs: 0-1,100 & 0-3,100 rpm, 52,700 bpm, 1/2" capacity in steel, 1-1/4" capacity in wood, 1/2" capacity in concrete, 6' power cord, variable-speed trigger, anti-slip comfort grip and 5.1 lbs weight.
Skil 2888-03 Cordless Drill/Driver Shop-Vac 4041100 Corded Ash Vacuum Dewalt DC820B Cordless Impact Wrench
Variable speed trigger controls users drilling speed. 2-speed gear box for high speed drilling and high torque applications. Matches driving power to specific applications and prevents screw stripping. Batteries included delivers double the run time. Specs: 0-400/0-1,250 no load rpm, 25+1 clutch settings, on-tool bit storage and weighs 4.5 lbs with battery. Includes two batteries, charger, double-ended bit and carrying case. Lets you clean your fireplace, barbecue or wood stove without making a dusty mess. Designed to remove cold ashed. Thermal protective device for user safety. Durable vinyl covered flexible lock-on steel hose with metal intake nozzle. 3 ply metal screen filter. Aluminum deflector. Efficient HPEA cartridge filter stops ultra fine dust and resists clogging. 2 stage filtration system stops ashes from discharging out the exhaust. Includes 4' x 1-1/2'' wire hose with metal nozzle and metal crevice tool. Frameless motor for extended tool durability and life, compact size and weight, replaceable brushes for increased serviceability, textured anti-slip comfort grip, durable magnesium gear case and all metal transmission for extended durability, heavy duty impacting mechanism directs torque to fastener without kickback. Specs: 18V, drive size is 1/2" square with detent pin retention, no load speed is 0-2,400RPM, impacts/min. 0-2,700IPM, 1,740 in/lbs max torque, 145 in/lbs max torque, 5-3/4" long, weighs 2.2 (tool only)lbs. Includes: tool only (batteries and charger sold separately).
Max DCF610S2 Single Speed Standard Cordless Screwdriver Kit Black and Decker DCF680N1 Cordless Screwdriver Kit Milwaukee 5376-20 Corded Hammer Drill
Compact, lightweight tool at only 2.2 lbs is designed to fit into tight areas. One-handed loading 1/4" hex chuck accepts 1" bit tips. 3 LEDs provide light and increased visibility without shadows. 15.0 clutch settings. 160 UWO max power. No load speed: 0-1,050 rpm. The kit includes: (1) 1/4" Screwdriver, (2) 12V Max Lithium Ion battery packs, (1) fast charger, (1) belt hook and (1) contractor bag for convenient storage. Motion activation variable speed and reversing control for precise fastening control. Variable speed 0-430 rpm for fastening into wood, plastic and light gauge metal. Adjustable two-position handle allows for operation in either in-line or pistol grip. Allows control when completing light fastening applications. Allows illumination in confined areas without shadowing. Battery state of charge on tools allows end users to know when to charge packs. Allows for quick screwdriver bit change and holds 1" bit tips. 8 volt max battery pack allows for longer run time and charges in one hour. Tool weighs only 1.1 lbs. Includes: 1 charger, (1) 8 volt max compact battery and kit bag. Equipped with a removable 360 degree side handle that also assists in setting the depth rod for pre-set hole drilling. Metal gear housing. 2-mode operation, hammer drill and drill only modes for concrete, wood, and metal. Over-mold increases grip and reduces user felt vibration. Specs: 0-2,800 no load rpm, 0-48,000 no load bpm, 1-1/4" wood capacity-hole saw, 1/2" metal capacity-twist bit, 5/8" concrete capacity, 8 ft fixed cord type, trigger lock, and weighs 4.9 lbs.
DRILL/DRIVER 20V LITH W/2-BATT Hitachi DS10DFL2 Drill/Driver Kit Dewalt DW511 Corded Hammer Drill
Worx 20 volt lithium batteries fit a wide range of Worx cordless lawn and workshop tools. MaxLithium battery provides maximum run time and holds its charge up to 18 months. Variable 2-speed design covers a wide range of drilling and fastening applications. Extremely compact and lightweight for fatigue-free work. 3/8" keyless chuck for fast bit changes. 15 plus 1 position clutch allows precise torque management. 265 in-lbs of torque makes quick work of tough drilling and driving jobs around the house or workshop. LED light with low battery indicator. No load speed: 0-350/0-1350/min. Rubber over mold grip for improved comfort and control. Weighs only 2.8 lbs. Includes: Cordless drill and driver, (2) 20 volt MaxLithium batteries and a 20 volt MaxLithium charger. Powered by Lithium-Ion battery for fade-free power and lighter weight (2.2 lbs)  which helps reduce fatigue during extended or elevated use. 300 in/lbs of torque to handle tough jobs in tight spaces. Two-speed gear setting to match the appropriate speed to the application. 21 plus 1 clutch with 21 torch settings and a drill mode for ultimate precision and control. Optimized handle dimensions for a secure grip and ergonomic comfort in all hand sizes. LED light effectively illuminates dark work spaces. Free-standing design allows drill to stand on its own when not in use. Charger circuitry prevents overheating and power loss. Balanced tool weight ensures proper wrist alignment. 3/8" keyless chuck for simple bit replacements and a variety of applications. No load speed 0-350/1,300 rpm. Responsive variable speed trigger for complete control during operation. Kit includes (2) 12 volt peak Lithium-Ion batteries, (1) 12 volt peak 25 minute quick charger, (1) No. 2 Phillips Driver bit, (1) 7 piece bit set and (1) carrying case. Lightweight for extended use with variable speed, dual mode hammerdrill/drill for wood, steel or masonry applications, 360 degree side handle with depth rod, two-finger, rubber trigger. Specs: max watts out 650W, no load speed 0-2,700RPM, blows/Min 0-46,000BPM, capacity in: steel 1/2", wood 1-1/4", concrete optimum 5/32-3/8", 11-1/2" long, weighs 4.3lbs. Includes: side handle, depth rod, chuck key with holder.
Makita HP1641K Industrial Corded Hammer Drill Kit DRILL HAMMER 2/SPD 8.5A 1/2IN Porter-Cable PCC606LA Drill/Driver Kit
Lightweight, all ball bearing construction for longer tool life with two modes of operation, hammering with rotation and rotation only, ergonomic handle with rubberized soft grip, extended service life of carbon brushes, recessed lock on button for continuous use. Specs: capacities in: concrete-5/8", steel 1/2", wood-1-3/16", no load RPM 0-2,800, BPM 0-44,800, 11-7/8" long, weighs 4.3lbs. Includes: side handle, depth gauge, keyless drill chuck, plastic case. Features a muscular 8.5 amp motor that handles all masonry drilling applications, delivering a max of 51,000 BPM for muscles and durability. The tool's drilling capacities range from 3/4" for masonry applications to 1-1/2" for wood. The HG 18-2 features a torque control auxiliary handle, which locks into place; the handle has a built-in depth gauge. The dual mode selector easily converts from rotation only to hammer drill mode. A rotating brush plate allows users to easily back out bound-up bits. It has two speed settings, one for high speed and one for high torque. Because of its heavy duty three jaw 1/2" chuck, the tool has a high clamping force that prevents drill bits from slipping. This robust drill has a metal front housing for longer life, a pistol grip handle with soft-grip design and an integral slip clutch for security against recoil. Includes (1) 360? auxiliary handle and (1) depth gauge. High performance motor delivers 330 unit watts out. 2 speed gear box (0-400/0-1,600) delivers the power needed to complete large or small applications. Metal ratcheting chuck minimizes bits slipping in chuck. Battery gauge displays charge remaining in the battery. LED light brightens dark work areas. 20 volt max Lithium Ion batteries with 1.5 amp/hour cells delivers more power and run time in a smaller package. Compact size (7-3/4" length) and light weight (3.5 lbs) allows tool to work in tight areas and minimizes user fatigue.
Dewalt DCD710S2 Cordless Drill/Driver Kit MK Diamond 158252 Bench Top Corded Tile Saw Milwaukee 2101-21 Cordless Screwdriver Kit
Compact, lightweight, two speed transmission for optimal speed and torque control. LED light provides visibility in dark areas. Specs: 180UWO max power, 0-400/0-1500 rpm no load speed, 25 nm max torque, max. drilling capacity [wood] 19 mm, max. drilling  capacity [metal] 10 mm, spindle thread and weighs 2.2lbs. Includes two 12V max lithium ion battery packs, fast charger, belt hook and contractor bag. Light weight and compact saw with detachable table stop that prevents saw from moving away from operator when pushing material into blade, rips ceramic and stone tiles up to 12", immersion blade cooling system requires no pump, built in 45 degree miter table, easy alignment rip guide, 45 degree rip guide, safeswitch prevents saw from being operated when locking key is removed. Specs: 120V, 5,500 RPM, blade capacity  4-1/2", depth of cut (4-1/2" blade) 1", weight 12 lbs., 18"Lx16"Wx7"H, UL approved. Includes: internal cord storage, 4-1/2" wet diamond blade included, rip guide, 45 degree rip guide, table stop. Features 21 position clutch setting with auto shut-off and 44" pounds of torque. 2-speed gearbox 200/600 rpm. 45 minute charge time. 1/4" hex drive size. Kit includes: (1) M4 1/4" hex screwdriver, (1) M4 2.0 battery and (1) M4 charger.
Dewalt DCD790B Brushless Drill/Driver Kit Milwaukee 0370-20 Right Angle Close Quarter Corded Drill M-D 48190 Portable Corded Tile Saw
Brushless motor delivers more run time. Compact (7.2" front to back), lightweight design fits into tight areas. High speed transmission delivers 2 speed settings (0-600/0-2,000 rpm) improving speed and torque control across a range fastening and drilling applications. Ergonomic comfort grip handle provides ideal balance and tool control. Metal 1/2" ratcheting chuck for superior bit gripping strength. LED light with 20 second trigger release delay to increase visibility in dark or confined spaces, LED placement on tool foot eliminates chuck shadows. Battery and charger not included. Provides a unique chuck angle for reaching into tight areas. Large paddle trigger, textured grip with convenient forward/reverse lever. Angled cord exit keeps cord out of work area. Specs: 120 volts AC, 0-1,300rpm, 1/2in.-20 spindle, 3/8" metal twist bit capacity, double insulated construction, double gear train, 8 ft. fixed cord and weighs 3.9 lbs. Includes chuck key with holder. For cutting a variety of ceramic, porcelain, and stone tile, diamond coated edge to cut through hard material, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, carrying handle, tilting table allows for miter cuts. Adjustable rip guide. Specs: : Motor: 3/4 HP, 3.5 AMPS. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 13" x 14-3/4". Weight: 20lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-3/8".  Use replacement blade 5542840
Dewalt DCD740B Right Angle Compact Cordless Drill/Driver Kit Dewalt DCD780B Cordless Drill/Driver Kit Milwaukee M12 Cordless Drill/Driver Kit
Compact front to back length. Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger. Specs: 360UWO, 2 speed settings, 0-650/0-2,000, plastic ratcheting chuck and weighs 3 lbs. Includes tool only with belt hook and 2" Phillips tip bit. Compact, lightweight design fits into tight areas. High speed transmission delivers 2 speeds for a range of fastening and drilling applications. Specs: 350UWO, 2000 max rpm, 15 clutch settings, 0-600/0-2000 rpm ratcheting chuck and weighs 2.7 lbs. Includes belt hook and on-board bit holder. Tool only. Delivers up to 275 in. lbs of torque. On-board battery fuel gauge displays remaining run time. New ergonomic handle design for increased comfort. Metal ratcheting chuck for maximum durability. 7-3/8" length. Weighs only 2.5 lbs. LED light. Kit contains: (1) M12 3/8" drill/driver, (2) M12 RedLithium battery, (1)M12 Lithium-Ion battery charger, (1) belt clip and (1) carrying case.
DRILL/DRIVER BRSHLS 1/2IN 20V Dewalt DW505 Corded Hammer Drill Milwaukee 5378-21 Corded Hammer Drill Kit
Brushless motor provides 50 percent more run time. Powerful motor has 370 MWO of power for heavy duty Applications with minimal stall. Transmission has 1,800 max rpm for speed of drilling and fastening applications. 1/2" Ratcheting chuck for improved and reliable bit retention. Compact size of 7.4" for work in tight spaces. Lightweight design at only 3.3 lbs for less fatigue. mode Collar allows you to switch from drilling to fastening mode without losing your clutch setting. High/low gear for high speed drilling, or high toque applications. Dual mode for hammerdrill/drill used  in wood, steel or masonry applications. Features two finger, rubber trigger. Specs: 6500W max watts out, 0-1,200/0-2,700rpm no load speed, 0-19,000/0-46,000bpm, capacity in: optimum- 5/32- 3/8", steel- 1-1/2", wood- 1/2" and weighs 4.8lbs. Includes 360-degree locking side handle, steel depth rod, chuck key with holder and kit box. Features variable speed, reversing, two mode selection for hammer with rotation or rotation only, synchronized gear shift, ergonomic soft grip handle, two finger trigger switch, self stop brush system. Specs: 120 AC, 0-1,350/0-2,500rpm no load, 0-20,000/0-40,000 bpm, capacities in: wood- 3-3/4", metal-twist bit- 1/2", concrete- 3/4", self-feed bit- 1-3/4", 10 ft. fixed cord, trigger lock and weighs 6.0 lbs. Includes side handle, depth gauge, chuck key and impact resistant carrying case.
Hitachi DS18DGL Drill/Driver Kit Milwaukee 5378-20 Corded Hammer Drill Dewalt DCF813S2 Lightweight Cordless Impact Wrench Kit
Powered by Lithium-Ion battery for less weight (3.7 lbs) and fade-free power. Powerful 400 in/lbs of torque to handle tough jobs in tight spaces. Two speed gear setting to match the appropriate speed to the application. 22 plus 1 stage clutch delivers 22 torque settings and a drill model for ultimate precision and control. LED light effectively illuminates dark work spaces. 1/2" keyless ratcheting chuck for quick and simple bit replacements. Responsive variable speed trigger provides complete control during operation. No load speed 0-450/1,250 rpm. Kit includes: (2) 18 volt Lithium-Ion batteries, (1) 18 volt 35 minute charger, (1) double-sided Phillips bit and (1) carrying case. Features variable speed, reversing with dual range speed control, hammer with rotation or rotation only, removable side handle and self-stop brush system. Specs: 120 AC, 0-1,350/0-2,500rpm no load, 0-20,000/0-40,000 bpm no load, capacities in: concrete- 3/4", metal/twist bit- 1/2", wood- 3-3/4", self-feed bit capacity- 1-3/4", 10ft. fixed cord, trigger lock and weighs 6.0lbs. Includes side handle, depth gauge and chuck key. Compact and lightweight for ease of use in tight areas with a slim handle and contoured grip, three LED lights that provide visibility without shadows in dark work areas, a battery that has been placed at the bottom of the handle that allows the tool to stand up between uses. Specs: 3/8-inch hog ring anvil, 1,150 in/lbs max torque, weighs 2.0lbs. Includes: (2) 12 Volt Max Lithium-Ion battery packs, (1) 40 minute charger and a contractor bag.
Porter-Cable PCCK600LB Cordless Drill/Driver Kit Makita HP2050F Corded Hammer Drill DRILL/DRIVER 18V COMPACT KIT
High performance motor delivers 330 unit watts out. Metal ratcheting chuck minimizes bits slipping in chuck. 2 speed gear box (0-400/0-1,600) delivers the power needed to complete large and small applications. Battery gauge displays charge remaining in the battery. LED light brightens dark work areas. 20 volt Max Lithium Ion batteries with 1.5 amp/hour cells delivers more power and runtime in a smaller package. Compact size (7-3/4" length) and lightweight (3.5 lbs) allows tool to work in tight areas and minimizes user fatigue. Drill has variable speed, reversing, built in LED light illuminates drilling edge and increases visibility with a bulb that never needs replacing, two modes, hammering with rotation and rotation only, positive stop mode selector prevents accidental mode disengagement, built in torque limiter, large trigger switch and 360 degree swivel side handle, recessed lock-on button, ball bearing construction, ergonomic shape with rubberized grip, air vent holes supply required ventilation. Specs: capacities in: concrete-3/4", steel (low) 1/2" (high) 5/16", wood-1-9/16", no load RPM (low) 0-1,200 (high) 0-2,900, BPM (low) 0-24,000 (high) 0-58,000, 14-1/4' long, weighs 5.6lbs. Includes: side handle, depth gauge, chuck key, tool case. Makita-built 4-pole motor delivers 480 in. lbs. of Max torque. 2 speed transmission (0-600 & 1,900 rpm) for a wide range of drilling and driving applications. Dual L.E.D. lights with afterglow illuminate the work area. Ergonomically designed handle with rubberized soft grip provides increased comfort. Compact design weighs only 3.3 lbs. with battery for reduced operator fatigue. 7-1/4" long. All metal gear construction for increased durability. Ratcheting chuck engineered to prevent bit slippage and improve bit retention. Kit includes: Drill driver, (2) 18V compact Lithium-Ion batteries, (1) rapid charger and a bag.
Bostitch BTC400LB Compact Cordless Drill/Driver Kit Dewalt DCD771C2 Cordless Drill/Driver Kit M12 2415-21 Right Angle Cordless Drill/Driver Kit
2 speed gear box (0-350, 0-1500 rpm) covers a wide range of drilling and driving applications. High output motor delivers 480 in. - lbs. of max torque. 1/2" keyless metal locking chuck provides improved durability and bit retention. 24 position clutch reduces stripping of fasteners by properly adjusting the torque setting. Integral LED work light provides greater visibility to work area. Includes: (1) BTC400 18 volt Lithium Drill/Driver, (2) BTC480L Lithium Ion batteries, (1) BTC492L 18 volt Lithium Ion charger, (1) PH #2 Screw Driving bit and (1) Bit tip storage. Designed with a high performance motor that delivers 300 unit watts out (UWO) of power for completing a wide range of applications. Compact, lightweight design fits into tight spaces. High speed transmission delivers 2 speeds (0-450 and 1,500 rpm) for a range of fastening and drilling applications. 1/2" single sleeve ratcheting chuck provides tight bit gripping strength. Ergonomic handle delivers comfort and control. Kit includes: 2 Lithium-Ion batteries, battery charger and convenient bag to carry tool. Built in electronics include variable speed control, an electronic clutch, 11 settings plus drill mode, fuel gauge,and overload protection, single sleeve ratcheting chuck, extended paddle switch, LED's illuminates work surface. Specs: 12V. no load speed is 800RPM, 100 in/lbs torque, head length is 3-3/4", single sleeve, ratcheting, Lituium-Ion battery, 11.75" long, weighs 2.43lbs. Includes: (1) M12 Red Lithium battery, (1) 30-minute charger, (1) carrying case.
IMPACT WRENCH 20V MAX LITH    Dewalt DW160V Right Angle Corded Drill ANGLE DRILL CORDLESS 18V 3/8IN
IMPACT WRENCH 20V MAX LITH
Our Price: $161.11
Powerful motor produces 260 ft-lbs of torque for heavy applications. Maximum of 1,650 rpm's for driving large fasteners quickly. Full variable speed trigger for precision control. Includes the Cordless Impact Wrench, 20 volt Max Lithium Ion battery and Charger. Compact for easy access in tight places with variable speed reversing, paddle switch, shielded chuck, 100 percent ball bearing construction, double gear reduction increases torque performance, decreases gear stress, pistol grip handle. Specs: no load speed 0-1,200RPM, max watts out 200W, capacity in: wood (spade bit)-1-1/8", wood (hole saw)-1-1/8", steel (twist bit)-3/8", (hole saw)-3/4", gear reduction double , anti-slip grip, anti-lock control, spindle lock , weighs 3.75lbs. Includes: chuck key with holder. Delivers cordless drilling power into tough-to-reach spaces. Packs plenty of torque for a wide range of drilling and driving tasks, yet it weighs only 4.0 lbs. with a slim design and over 1' of tool extension.  It?s ideal for assembly, garage door installation, steel framing, woodworking, electrical, and any other job that requires a more compact drilling solution in close-quarters applications. Built-in LED light with afterglow illuminates the work area. Specs: Variable speed is 0-1,800 RPM, 3/8" keyless chuck, 121 in.lbs. max torque, 12-3/8" long. Battery and charger not included.
Dewalt DWD520K Corded Hammer Drill Kit DRILL/DRIVER CMPT BRSHLESS 20V WRENCH DRV IMPACT 18V 3/8INSQ
Generates 50 percent more power with increased overload protection for added durability. Dual mode for versatility in masonry, wood, or steel drilling applications. Features two speed range, high speed or high torque, soft grip handle, two finger trigger and metal gear housing. Specs: 980W max watt out, 0-1,200/0-3,500rpm no load speed, 0-56,000bpm, capacity in: steel- 1/2", wood- 1-1/2", concrete optimum 5/32-7/16", 14" long and weighs 6.0lbs. Includes 360 locking side handle, steel depth rod, chuck key with holder and kit box. Ergonomic comfort grip handle provides ideal balance and tool control. Compact (7.52" front to back), lightweight design fits into tight areas. LED light with 20 second trigger release delay provides increased visibility in dark or confined spaces. Weighs only 2.6 lbs. Also included with the Compact Drill/Driver: (2) Li-Ion batteries, (1) charger and (1) kit bag. 2-Speed Impact Wrench with 3/8" square drive provides fastening control for a wide range of applications. Dual LED lights illuminate the work area. Reverse Rotation Auto-Stop Mode stops rotation and impact when fastener is loosened adequately. Ergonomically designed handle with rubberized soft grip provides increased comfort. Compatible with Makita 18V Lithium-Ion batteries with a Star symbol. Specs: 0-1,300/0-2,400 RPM & 0-2,000/0-3,600 IPM, and 130 ft.lbs. max torque. Tool only (battery and charger not included).
DRILL/DRIVER 1/2IN COMP KIT18V Makita HR2475 Corded Rotary Hammer Drill Milwaukee M12 Cordless Drill/Driver Kit
Built with a Milwaukee 4-pole frameless motor, the M18 compact 1/2" drill driver delivers 500 in-lbs of torque and up to 1,800 rpm. At only 7-1/4" length, and weighing only 2.9 lbs, this drill driver allows you to access tight work spaces. All metal gear case and 1/2" metal chuck provides maximum durability, even on the most challenging work sites. RedLink intelligence provides advanced protection in abusive situations and manages the tool's temperature to provide maximum life. The RedLithium battery pack delivers more work per charge and more work over pack life. The kit includes (1) M18 Compact 1/2" drill driver (Bare Tool), (2) M18 Compact RedLithium batteries, (1) M18 and M12 Multi-voltage charger (1) measuring tape, (1) 42 piece accessory kit, (1) Milwaukee INZALL marker and (1) carrying case. Variable speed with 3-Mode operation rotation only, hammering with rotation and hammering only, ergonomic D-shaped handle with rubberized soft grip, accepts SDS-PLUS bits, one touch sliding chuck, built-in torque limiter, 'No hammering when idling' function, extended service life of carbon brushes, recessed lock on button, 40 different bit angle settings. Specs: 7AMP, impact energy is 2.7 ft./lbs., no load BPM is 0-4,500, no load RPM is 0-1,100, capacity in: concrete 1", steel-1/2", wood-1-1/4", 16-7/8" long, weighs 6.6lbs. Includes: (1) rotary hammer, (1) 360 degree auxiliary handle, (1) depth gauge, (1) carrying case. Includes: (1) rotary hammer, (1) auxiliary handle, (1) depth gauge, (1) plastic tool case. Features Powerstate brushless motor which delivers up to 350 in-lbs of peak torque with maximum sustained torque to complete a variety of applications. Redlithium battery technology for superior pack construction, electronics and performance deliver more work per charge and more over pack life. Redlink plus intelligence for optimized performance and overload protection using total system communication between tool, battery and charger. 30 minutes total charge time. Chuck type: 1/2" metal single sleeve - ratcheting lock. Speed: 0-450/0-1,700 rpm. Lightweight and versatile. Kit includes: (1) M12 Fuel 1/2" drill/driver, (1) M12 Redlithium 2.0 compact battery pack, (1) M12 Redlithium XC 4.0 extended capacity battery pack, (1) belt clip and (1) carrying case.
DRILL DRIVER KIT SUB-CMPCT 18V Milwaukee M12 Cordless Impact Wrench Bosch HD21-2 Duel Corded Hammer Drill
Sub-Compact Brushless Cordless Impact Driver Drill is a drilling and driving solution with significantly less weight and is part of a class of compact tools, with the size and weight of lower voltage tools but with the performance, power and compatibility of 18 volt. Efficient brushless motor with two speed settings and dual L.E.D. lights illuminate the work area. Innovative Assist Mode (A-mode) helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins, and is ideal for driving longer fasteners. Ergonomically designed handle with rubberized soft grip provides increased comfort. Ideal for working in tight spaces. Specs: 0-500/0-1,700 RPM, 0-1,600/0-3,900 IPM, 350 in. lbs. maximum torque, 6-3/8" length, and 2.8 lbs. weight. The Kit Includes: 18 volt 1/2" Sub Compact Brushless Driver Drill, 18 volt Lithium-Ion battery, 18 volt charger, and 14" Contractor Tool bag. Impact mechanism delivers 1,200 in-lbs of torque. New ergonomic handle design for increased comfort. On-board battery fuel gauge displays remaining run time. 3/8" anvil with friction ring for fast and easy socket changes. No load IPM 0-3,300. Charge time of only 30 minutes. Kit includes (1) M12 3/8" Impact wrench, (2) M12 Red-Lithium batteries, (1) M12 Lithium-Ion battery charger, (1) belt clip and (1) carrying case. Dual-mode selector converts from rotation only to hammer drill mode. Ergonomic pistol-grip handle. Integral slip clutch helps minimize torque reaction. Features rotating brush plate, metal gear housing and 2 speeds. Specs: 3-jaw chuck, max hole in: concrete- 7/8", wood- 1-5/8", metal- 5/8", 0-900/0-3000 no load rpm, 0-18000/0-54000 no load bpm, 13.5" long and weighs 10.9 lbs. Includes 360-degree auxiliary handle, depth gauge and carrying case.
Milwaukee 5262-21 Corded Rotary Hammer Kit DRIVER DRIL CPT 2.0AH BATT 18V WRENCH IMPCT 3-SPD 18V 1/2IN
Features a lightweight design to provide ease of use and reduce user fatigue. Mechanical clutch protects tool when bit binds up. 3-mode operation: rotary hammer, hammer only and rotation only. Variable position chisel stop allows steel to be adjusted for work in any orientation. Specs:1.8 ft-lbs impact energy, 0-1,500 no load rpm, 0-5625 no load bpm, 10 ft cord length, double insulated, D-handle style, 2-1/2" thin wall core bit capacity, and weighs 5.8 lbs. Delivers a powerful performance, with 600 in-lbs of torque and two drilling speeds (0-1,700 rpm for high speed and 0-500 rpm for torque). This cordless drill was engineered with a heavy duty chuck that allows for increased robustness and torque transfer, as well as the Bosch Compact Tough design for the shortest head length in class (7.0" long) and a weight of only 3.5 lbs. This is a durable and beefy drill that can power through the toughest materials and has an LED for visibility in hard to see areas. This kit includes: (1) 18 volt Compact Tough 1/2" Drill/Driver, (2) 18 volt 2.0 Ah Lithium Ion SlimPack batteries, (1) 18 volt fast charger, (1) double sided Phillips Drive bit and (1) carrying bag. Brushless 3-Speed 1/2" Impact Wrench combines extended run time and speed control for unmatched fastening performance. Built-in LED light with an independent on/off switch illuminates the work area. Rubberized soft grip provides increased comfort on the job. Reverse rotation auto-stop mode stops rotation and impact in two seconds when fastener is loosened adequately. Compatible with Makita 18V Lithium-Ion batteries with a Star symbol. Specs: 0-1,600/0-2,100/0-2,800 RPM & 0-1,800/0-2,600/0-3,500 IPM, and 210 ft.lbs. max torque. Tool only (battery and charger not included).
DRILL HAMMER SDS1IN PISTOL GRP DRILL HAMMER 1IN SDS ROTARY   Makita HP2070F Corded Hammer Drill
Pistol grip hammer drill. 2.6 Joules of impact energy for fast drilling and chipping speed. 8.0 amp high performance motor. Rotating brush ring delivers full speed/torque in forward and reverse. Integral clutch reduces sudden, high torque reactions if bit jams. No load speed: 0-1500 rpm. Variable speed switch. Tool length: 13.25"; Tool weight: 5.8 lbs. Kit includes 360 degree side handle, depth rod and kit box. 2.8 joules of impact energy for fast drilling and chipping speed. Shocks - active vibration control, reduced vibration felt in the handles. 8.0 amp high performance motor. Rotating brush ring delivers full speed/torque in forward and reverse. Integral clutch reduces sudden, high torque reactions if bit jams. Variable speed switch. No load speed 0-1500 rpm. Tool length: 16.75"; Tool weight: 6.6 lbs. Includes 360 degree side handle, depth rod and kit box. Drill has variable speed, conveniently located reverse slide switch, built in LED light illuminates drilling edge and increases visibility with a bulb that never needs replacing, two modes, hammering with rotation and rotation only, positive stop mode selector prevents accidental mode disengagement, built in torque limiter, large trigger switch and 360 degree swivel side handle, recessed lock-on button, ball bearing construction, ergonomic shape with rubberized grip, air vent holes supply required ventilation. Specs: capacities in: concrete-3/4", steel (low) 5/8" (high) 5/16", wood (low)-1-9/16" (high) 1", no load RPM (low) 0-1,200 (high) 0-2,900, BPM (low) 0-24,000 (high) 0-58,000, 14-1/4' long, weighs 5.6lbs. Includes: side handle, depth gauge, chuck key, tool case.
Dewalt DCD780C2 Cordless Drill/Driver Kit Milwaukee M18 Cordless Drill/Driver Kit Dewalt DCD740C1 Right Angle Compact Cordless Drill/Driver Kit
Compact, lightweight design fits into tight areas. High speed transmission delivers 2 speeds for a range of fastening and drilling applications. Ergonomic handle delivers comfort and control. Heavy-duty ratcheting chuck provides superior bit gripping strength. Specs: 20V Max, 350UWO max power, 2000 max rpm, 15 clutch settings and 0-600/0-2000 rpm. Includes two 20V max lithium ion battery packs, 30 minute fast charger, belt hook, on-board bit holder and kit box. Built with a Milwaukee 4-pole frameless motor, the M18 compact 1/2" drill driver delivers 500 in-lbs of torque and up to 1,800 rpm. At only 7-1/4" length, this drill driver allows you access to the tightest work spaces. Advanced overload protects the tool against abusive situations and provides maximum life. All metal gear case and 1/2" metal chuck provides maximum durability, even on the most challenging worksites. LED light. 30 minutes charge time. Kit comes with (1) M18 compact 1/2" drill driver, (2) M18 Red Lithium compact batteries, (1) M18 & M12 multi-voltage charger and a carrying case. Dual speed ranges for increased user flexibility providing a wide range of applications. Compact front to back length allowing users to fit into hard to reach spaces. Multi-grip trigger provides comfort and convenience. Spec: 360 UWO, 2 speed settings, 0-650/0-2000 rpm, 3/8" plastic ratcheting chuck. Includes 20V max 1.5 Ah compact li-ion battery, 30 minute fast charger, belt hook, 2" phillips tip bit and kit box.
Milwaukee 5387-22 Corded Hammer Drill Kit Bosch 11255VSR Bulldog Rotary Hammer Drills DRILL/DRIVER KIT 1/2IN 18V
Motor provides overload protection. Metal gear case can withstand daily jobsite abuse. Lightweight balanced design reduces operator fatigue. Dual speed motor optimized for concrete fastening. Specs: 120 AC, 0-16,000/0-40,000 bpm no load, 0-1,000/0-2,500 rpm no load speed, capacity in: steel- 1/2", concrete- 3/4", 10 ft. Quik-Lok cord, and weighs 6.4 lbs. Includes side handle, depth gauge, chuck key and carrying case. HammerHook allows quick tool storage during the job. 0-1,300 rpm; 0-5,800 bpm. Multi-function selector provides 3 modes of operation: rotation only, rotary hammer and hammer-only mode. Vario-Lock positioning rotates and locks chisel into 36 different positions to optimize working angle. Rotating brush plate provides equal power in forward and reverse. Cord Turret 35" pivot for added flexibility and longer cord life. SDS-plus bit system tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. D-handle design is ideal for overhead and downward drilling applications. Variable speed reversing trigger for accurate bit starting as well as removing fasteners or bound bits. Integral clutch helps minimize torque reaction. Brushless motor optimized for efficiency. Provides long run-time and longer tool life. Delivers 500 in-lbs of torque and 0-450/0-1,800 rpm for a wide range of drilling and fastening applications. Compact design provides ideal balance and control. Also ideal for overhead applications or work in tight spaces. All metal gear case and 1/2" metal chuck provide maximum impact and shock durability. RedLink intelligence provides advanced overload protection against abusive applications and monitors the temperature to prevent damage and ensure maximum tool and battery life. RedLithium battery for more work per charge. Weighs only 3.7 lbs with battery. On board fuel gauge on battery. 6-7/8" tool length. Kit includes: (1) M18 1/2" Compact brushless Drill/Driver, (2) M18 RedLithium 2.0 compact battery packs, (1) M18 and M12 Multi-voltage charger and (1) carrying case.
Dewalt DCD790D2 Brushless Drill/Driver Kit SCREWGUN DRYWALL 20V MAX XR   DRYWALL SCREW GUN KIT COMPACT
Brushless motor delivers more run time. XR Li-ion batteries with fuel gauge provide more capacity over standard packs. Compact (7.2" front to back), lightweight (3.5 lb) design fits into tight areas. High speed transmission delivers 2-speed settings (0-550/0-2,000 rpm) improving speed and torque control across a range fastening and drilling applications. Ergonomic comfort grip handle provides ideal balance and tool control. Metal 1/2" ratcheting chuck for superior bit gripping strength. LED light with 20 second trigger release delay provides increased visibility in dark or confined spaces. LED placement on tool foot eliminates chuck shadows. Includes (1) 1/2" drill/driver, (2) 20V battery packs, (1) charger, (1) belt hook, and (1) kit box. Up to 4,400 rpm provides greater speed. Brushless motor delivers maximum run time. Balanced and ergonomic. Nosecone locks on securely and is easily removed while maintaining consistent screw depth. 1/4" hex drive; 8.75" tool length. Weighs only 3.3 lbs. Kit includes: (1) Max XR Li-Ion brushless drywall screw gun, (1) Multi-voltage charger, (2) 20 volt Max XR compact Li-Ion batteries (2.0 Ah) and a handy bag to carry it all. The M18 FUEL Drywall Screw Gun is faster than corded models and features AUTO START functionality and delivers up to 3X longer run time than other cordless competitors. The POWERSTATE Brushless motor spins at 4,500 RPM resulting in faster productivity. AUTO START feature automatically starts the motor on contact with drywall providing less noise between screws and 3X longer run time. Includes: M18 Drywall Screw Gun, M18 Red Lithium battery pack, contractor bag, M18 & M12 multi-voltage charger, PR2 bit, and belt clip.
MK Diamond 157222 Table Corded Tile Saw Makita DA3010F Right Angle Corded Drill TOOL CONNECT DRILL TOOL 20V
Versatile and compact tabletop tile with high torque universal motor, high impact thermoplastic water reservoir, safeswitch prevents saw from being operated when locking key is removed. Specs: 120V, 5,500 RPM, blade capacity 7", arbor size 5/8", length of cut 12", depth of cut 2", LxWxH 17" x 14" x 12", weight 15 lbs. Includes: 7" wet cutting diamond blade, water pump, rip guide. Compact, easy use between framing studs or any other close quarter application with variable speed for controlled drilling in wood/metal and speedy fastening, built in shock proof, high output, white LED light illuminates drilling area with a bulb that never needs replacing throughout the life of the tool, paddle switch with speed limiting dial, reduced head height, ball bearing construction. Specs: capacity in: wood-13/16", steel-3/8", no load RPM is 0-2,400, 10-5/8" long, weighs 3.1lbs. Includes: grip complete, chuck key, key holder. Pairing the tool with the Tool Connect app enables you to access the last seen location of the device and diagnostics. Brushless motor delivers up to 75 percent more runtime vs. 18V NiCad brushed motors. Dewalt Home mode and 3 programmable modes to customize speed and light brightness. Ergonomic comfort grip handle provides the ideal balance and comfort. Specs: 1/2" chuck, 0-2,000 RPM, 460 UWO max power, 4 speed settings, 3.4 lbs. tool weight. 15 clutch settings. Includes: DCD792 Tool Connect Compact Drill/Driver, (2) Lithium-Ion batteries, charger, and kit box.
Milwaukee 2615-21CT Right Angle Cordless Drill Kit Makita HP2010N Corded Hammer Drill M-D Building 48191 M-D Fusion Wet Tile Saws
Features 3.75" head length, electronic clutch with 11 settings plus drill mode for complete control in fastening applications, extended multi-position handle and built in LED's. SPEC: 0-1500 no load speed, 100 in-lbs torque, multi-position trigger, 30 min charge time and weighs 3.7 lbs. Includes M18 Compact Red Lithium battery pack, 30 minute charger and carrying case. Variable speed switch, 2-speed gear change, depth gauge, all ball and needle bearings for long tool life, adjustable side handle, double insulated. Specs: capacity in: concrete-(high) 1/2" (low)-3/4", steel-(high) 1/4"  (low)-1/2" , wood-(high)-3/4" (low)-1-1/2", no load RPM (high) 0-2,300 (low) 0-900, BPM (high) 0-46,000 (low) 0-18,000, 13-3/4" long, weighs 6.4lbs. Includes: drill chuck, chuck key, side handle, depth gauge, steel tool case. For cutting a variety of ceramic, porcelain, and stone tile, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, large carrying handles, tilting table allows for miter cuts. Heavy-duty cast aluminum cutting table, drain plug makes for easy water change, adjustable rip guide mounts securely. Secs: Motor: 1 HP, 6.25 Amps. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 18" x 22". Weight: 33lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-1/16".  Use replacement blade 554.2840
Duraspin 7W0001N Auto-Feed Cordless Screwdriver DuraSpin 2P0001N Cordless Collated Screwdriver Dewalt DCD980M2 Drill Kit
Li-Ion auto feed screwdriver. 5000 rpm high speed motor. Corner-fit feed system. Tool-free screw length adjustment. Precise depth of drive adjustment with depth lock. Quick slide button bit change. Variable speed trigger with lock and reverse. Belt hook right or left handed adjustable. Drives #6 - #8, Screw lengths: 1" - 2". Includes (2) 18 volt Li-Ion batteries, (1) charger, (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag and (2) drive bits. High torque motor for heavy-duty applications, jobsite portability, fully integrated (no attachments) design for better balance, smoother operation, and less user fatigue, no more stripped out heads and improved bit life, adjustable depth-of-drive. Specs: 2500RPM, weighs 6.0lbs. Includes: (2) 18 volt Li-Ion batteries, (1) charger, (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag, (1) square bit and (1) Phillips bit. Max XR Premium Lithium Ion batteries offer longer tool run time and enhanced durability. 3 speed all-metal transmission matches the tool to task for fastest application speed and improved run time. Heavy-duty 1/2" metal ratcheting chuck with carbide inserts provides superior bit gripping strength. LED light with 20 second delay after trigger release. High power, high efficiency motor delivers 535 unit watts out of max power for superior performance in all drilling and fastening applications.
Milwaukee 3107-6 Right Angle Corded Drill Kit XRP DCD940KX Cordless Drill/Driver Kit DRILL STUD/JOIST 60V MAX BARE
D-handle right angle drill kit with a powerful 7 amp motor. Delivers trigger speed control in two ranges: 0-335/0-750 rpm plus reverse. Torque offers 1/2" capacity in steel. Heavy duty 1/2" keyed chuck with holder provides an industrial hold during drilling and fastening. Versatile: handles up to a 4-5/8" Self feed bit. Quik-Lok 8 ft 3-wire grounded rubber cord provides easy storage and field replacement. Weighs 10.3 lbs. 120V AC. No load rpm 0-500. This kit includes: (1) 1/2" D-Handle right angle drill, (1) 3/16" socket wrench, (1) 9/16" open end wrench, (1) RAD assembly and (1) side handle. Features extended run-time batteries, 3-speed all-metal transmission, heavy duty ratcheting chuck helps prevent bits from slipping and falling out and LED worklight. High power, high efficiency motor for superior performance in all drilling and fastening applications. Specs: 450UWO max power, 0-500/0-1,250/0-2,000 max rpm, 22 clutch settings and weighs 6.25lbs. Includes one hour charger, two 18V XRP batteries, 360 degree side handle and kit box. The Dewalt 60 Volt Max VSR stud and Joist Drill with E-Clutch system features a 1/2" chuck and brushless motor that provides corded power in a cordless solution. Ideal for plumbers, electricians and HVAC installers who need to drill large diameter holes in wood. This drill provides exceptional power, control, durability and run time with its 60 volt brushless motor, E-Clutch system, mechanical clutch and 2 variable speed ranges. Equipped with the innovative bind up control feature called E-Clutch system this drill increases user control in bind-up/stall situations by sensing a stall during use and managing torque accordingly. Adjustable handle and 2 position side handle for leverage and control. 2 variable speed ranges (0-300/ 0-1250 rpm) to match appropriate speed to the application. E-Clutch is a Perform and Protect feature that detects reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained. Tool length 6.83"; Tool length 16". Designed to provide a high level of one or more of the following; control, dust containment, or low vibration without sacrificing performance. Includes the Cordless Stud and Joist Drill, Chuck key and holder, 2 position side handle and adjustable bail handle.
Bosch RH328VC Corded Rotary Hammer WRENCH DRV IMP KIT 18V 1/2INSQ Ingersoll-Rand W5130-K1 Cordless Impact Wrench Kit
Variable speed 3 finger trigger, SDS-Plus tool-free bit changes, 3 modes of operation, rotation only, rotary hammer and hammer only mode, vario-lock positioning rotates and locks chisel into 36 different positions, padded rear handle, 360 degree auxiliary handle with built-in depth gauge, integral clutch, double insulated, UL listed, complies to OSHA. Specs: 120V, impact energy is  2.6 ft./lbs., optimal concrete capacity range: 1/4"-7/8",max. hole diameter in: concrete-1-1/8", concrete-thin wall core bit-3", steel-1/2", wood-1-1/4", no load BPM 0-3,900, no load RPM 0-850 ,  weighs 9.3lbs., 12' cord, 15-1/4" long. Includes: (1) rotary hammer, (1) auxiliary handle, (1) depth gauge, (1) carrying case High torque Impact Wrench features a 1/2" square drive that will fit impact-rated socket sets. Delivers 325 ft.lbs. max torque, with 1,600 RPM and 2,200 IPM for superior fastening power. Shock absorbent handle protects battery housing for extra durability. Rocker switch for forward/reverse operation. Rubberized soft grip handle provides increased comfort on the job. Compact and ergonomic design at only 10-1/2" long. Weighs only 7.5 lbs. with battery for reduced operator fatigue. Built-in LED light illuminates the work area. 18V Lithium-Ion 3.0Ah battery features an integrated LED battery charge level indicator and reaches a full charge in 30 minutes or less. Compatible with Makita 18V Lithium-Ion batteries with a Star symbol. Includes: (1) 18V LXT 1/2" Impact Wrench, (1) Lithium-Ion battery, rapid charger and tool bag. Ideal for professional service technicians. The 20 volt mid-torque cordless impact wrench delivers the power you need, where you need it. All metal drive train and hammer mechanism. Robust, durable and optimized for maximum power and efficiency. Lightweight, balanced, ergonomic handle with rubber over molded grip minimizes vibration, reduces fatigue and enhances user comfort during extended use. Tough housing protects against fluids, chemicals and repeated drops. Compact and durable motor for optimum performance and long life. Easy to use battery interface makes changing the battery quick and simple. Kit includes: (1) bare tool, (1) 20 volt Lithium Ion 1.5 Ah battery, (1) charger and (1) blow molded case.
Hole-Hawg 1675-6 Right Angle Corded Drill IMPACT WRNCH 3/8IN 20V MAX LED WRENCH IMPACT 4.0AH 1/2IN 20V
Powerful, yet compact for large hole drilling between joists and studs, two speed ranges increase the versatility of this drill, hi-torque and hi-speed for the heavy duty user with an extra long pipe handle that helps you control the power. Specs: 120AC, no load RPM is 300/1,200, capacity in: wood-(auger bit)-1-1/2", (self-feed bit)-4-5/8", metal (twist bit)-1/2", spindles 5/8"-16, triple gear train, 8 ft. fixed cord, grounded, weighs 11.5lbs. Includes: pipe handle. Compact and ergonomic with only 5.5" head length and 2 lbs (Tool Only). Dewalt built brushless motor for increased efficiency and run time. Max torque of 150 ft-lbs in a compact package for a variety of different fastening applications. 3 LEDs and a belt clip for additional ease of use. 3/8" anvil size. No load speed 0-2800. Impacts/min 0-3200 IPM. Kit includes: (1) 20 Volt Max XR 3/8" Compact Impact Wrench Tool, (2) 20 Volt Max XR Lithium Ion batteries, (1) Fast charger, a belt clip and convenient Tool bag. 400 ft-lbs of maximum torque to perform a wide range of heavy-duty fastening applications. XR Li-Ion batteries with fuel gauge. Variable speed trigger with electric brake provides user improved control. LED light provides user greater visibility when working in dark environments. Durable magnesium gear case and all metal transmission for extra extended durability. Drive size: 1/2"; 4.0 Ah amps per hour. No load speed: 0-1500 rpm. Tool weighs only 6.8 lbs. Includes fast charger, (2) Li-Ion batteries (4.0 Ah) and kit bag.
Milwaukee M18 Red Lithium REDLINK Plus Cordless Impact Wrench WRENCH IMPACT CRDLSS 1/2IN 20V QEP 83200 Corded Bridge Saw
Cordless 3/8" compact impact wrench. 4-pole frameless motor and optimized impact mechanism, delivers up to 2,450 rpm, 3,350 ipm and 167 ft-lbs of fastening torque for ideal performance. RedLink intelligence provides overload protection using total system communication between tool, battery and charger. LED light to illuminate work surfaces and includes and all metal, reversible belt clip for temporary tool storage. Includes (1) M18 3/8" impact wrench with friction ring, (2) M18 Red Lithium XC extended capacity batteries, (1) M18 & M12 multi-voltage charger, (1) belt clip and carrying case. Up to 700 ft-lbs of max torque and 1200 ft-lbs of max break-away torque. Multi-speed control for a variety of applications (0-400/1,200/1,900 rpm). LED light with 20 second delay for increased visibility. Compact design of 8-13/16" in length and weighs only 7.2 lbs. Included with the Brushless High Torque Impact Wrench with detent pin anvil tool is (1) 5.0 Ah battery and (1) multi voltage charger. Use to cut marble, granite, porcelain, stone and tile. Dual internal water delivery system for maximum dispersion. Adjustable pivoting rail allows easy angle positioning from 90? to 45?. Angle/rip guide for consistent cuts. Automatic thermal overload protection prevents saw from overheating. Child-proof, locking on/off switch and key for safety. Power cords are encapsulated in a protective tube and attached to a flexible rod; keeps the cutting table safe and clear. Specs: motor: 1 HP, 120V-60Hz/9.5 Amps, 1100 watts, rpm: 3420 rpm, 8" blade capacity, 5/8" arbor, rip cuts 24" tile, diagonal cut on 18" tile, depth of cut: 1-3/8", dimensions: 37" L x 18" W x 47-1/2" H (w/legs), weight 82.32 lbs ( w/legs). Includes: transport handle and fold-out stand with wheels, 8" porcelain rated continuous rim wet diamond blade, high volume water pump and angle/rip cutting guide.
WRENCH IMPACT CRDLS/BRSHLS 18V Super Hawg 1680-21 Right Angle Corded Drill Hitachi DH38YE2 Corded Rotary Hammer
For light load work installing pipe supports, scaffolding, heavy load work assembling steel frames and delicate work tightening small diameter screws. Features brushless motor technology for more run time, increased power and extended durability with essentially no maintenance. More torque, more power. Compact design for better handling. Highly efficient. Tightening mode selector for a variety of applications. Smooth socket changes with a friction ring anvil; the friction ring holds a socket on the anvil, making it easier to install a pin and O-ring to securely lock the socket in place. Newly designed air flow system for optimal cooling efficiency. The rear fan efficiently cools down the motor and hammer case for more durability. Well balanced weight distribution for better work efficiency. Less user fatigue due to the well balanced design with the center of gravity positioned at the middle finger of the grip hand. Dust and water resistant. Smooth control electronic switch allows for finer adjustments in the low speed range, it is also more efficient in transferring energy resulting in longer tool life. 0 - 2700 rpm max no load speed. Includes 2 batteries, a charger and a carrying case. Two operating speeds with a clutch in the low gear range, speed shifting is easy, easy turn gear shift knob, comfort grip handle features 3 positions with 90 degree left-right rotation for maximum operator comfort for all applications. Specs: 120A, no load RPM is 450/1,750, low speed clutch, capacity in: wood (self-feed bit)-4-5/8", (hole saw)-6", metal (twist bit)-1/2", spindle  5/8 in.-16, triple gear train, 8 ft. fixed cord, grounded, 22" long, weighs 14.7lbs. Includes: side handle. Two modes of operation, hammer only and hammer drilling, low vibration levels, 18.8m/s2 (full load), low noise levels of only 95.2 dB (full load), safety clutch shuts down rotation in the event of a bound bit, dust proof cover, auto-stop carbon brushes, sealed grease system, soft elastomer handle, adjustable 360 degree side handle. Specs: full-load speed is 510RPM, full-load impact is 2,800BPM, solid bit capacity is 1-1/2", core bit capacity is 4-1/8", 16-11/32" long, weighs 14.1 lbs. Includes side handle, dust cover, depth stopper and case.
Ingersoll-Rand W5350-K1 Cordless Impact Wrench Kit MK Diamond 160028 Corded Tile Saw WRENCH IMPACT KIT W/RING 1/2IN
180 ft-lbs of torque in a slim, lightweight design that offers the reach of a ratchet while packing the incredible power of an impact. Ideal use for hard to reach jobs, with a head only 2.2" in height, the impact tool can go places other impact wrenches can't. From 0-1900 rpm instantly. With the variable speed trigger for more control and a conveniently located forward reverse switch, you can keep one hand on the trigger and let the tool do the rest. Designed with a steel-lined aluminum hammer case and a super tough nylon housing. Includes: (1) W5350 1/2", (1) BL2012 20 volt 2.5 aH Lithium Ion battery, (1) BC1121 Universal Lithium Ion Charger and (1) case. Wet cutting tile saw. High torque, universal motor. Runs on standard house current and draws only 5 amps at 120 volts. Engineered for cutting ceramic, travertine and slate. MK Safe-switch prevents saw from being operated when locking key is removed. Chrome guide-bar and linear bearing assembly ensures accurate tracking and alignment. Single piece zinc-plated steel frame for rigidity, strength and durability. Hinged blade guard for easy blade changes. Fully submersible, thermally protected water pump. High impact removable thermoplastic water reservoir will not rust or bend out shape. 7" blade capacity. Includes 7" diamond blade, water pump, wrenches and rip guide. Depth of cut 2"; length of cut 18"; diagonally cuts 13" tile. Dimensions of saw: 33"L x 18-1/2"W x 12-5/8"H. Delivers 450 ft-lbs fastening torque and 600 ft-lbs nut-busting torque. The POWERSTATE brushless motor delivers up to 0-2,400 RPM resulting in increased productivity. REDLINK PLUS intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM compact batteries or extended capacity batteries, the M18 FUEL mid-torque delivers more work per charge and more work over the life of the pack than competitive batteries on the market. The 3-mode DRIVE CONTROL provides greater control over output speed and power for greater versatility. This tool offers quick, tool-free socket changes with a 1/2" friction ring anvil. 6.7" in length and weighs 5.3 lbs. Includes: (1) M18 FUEL 1/2" Mid-Torque Wrench with Friction Ring, (2) 18 volts M18 Red Lithium extended capacity battery packs, (1) M18 & M12 multi-voltage charger, (1) belt clip and (1) carrying case.
DRILL STD/JST 1/2 VSR 60V MAX Milwaukee 2663-22 Compact Cordless Impact Wrench HAMMER ROTARY SDS 1-9/16IN
HAMMER ROTARY SDS 1-9/16IN
Our Price: $432.00
The 60 volt Max VSR Stud and Joist Drill with E-Clutch system features a 1/2" chuck and brushless motor that provides corded power in a cordless tool. Ideal for plumbers, electricians and HVAC installers who need to drill large diameter holes in wood. This drill provides exceptional power, control durability and runtime with its 60V brushless motor, E-Clutch system, mechanical clutch and 2 variable speed ranges. Equipped with the innovative bind-up control, this drill increases user control in bind-up/stall situations by sensing a stall during use and managing torque accordingly. Adjustable ball handle and 2 position side handle for leverage and control. Metal gear housing for jobsite durability and increased reliability. Features 4-pole frameless motor and one-handed socket change. Specs: 1/2" square friction ring anvil, 450 ft-lbs torque, 0-1,900 rpm, 02,200 ipm, 8-7/8" length and weighs 6.7 lbs. Includes two M18 XC high capacity Red Lithium batteries, M18 lithium-ion battery charger and carrying case. Two modes of operation, hammer only and hammer drilling. Designed to take on a variety of tasks including drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods. Features large change lever, oversize trigger switch, soft over-molded handle, and 360 degree side handle. Specs: Vibration Level 16.5m/sec2, No Load Speed 620/RPM, Impact Rate 2,800/BPM, Impact Energy 6.3ft/lbs., Drill Bit Capacity: 1-9/16", Core Bit Capacity: 4-1/8", Weight: 15.6lbs. Includes: side handle, depth stopper rod, grease and carrying case.
MK Diamond 159943 Corded Tile Saw DRILL RIGHT ANGLE 18V LITHIUM WRENCH IMPT W/FRCT RG KT 1/2IN
The powerful 7.4 amp, high-torque motor has maintenance-free, self-lubricating pinion and gear-box assembly. Tilting head allows for precise 45 degree miter cuts and variable height cutting head allows for plunge cutting. Sliding aluminum die-cast cutting table rips 18" tile and diagonally cuts 13" tiles. Linear bearing and chrome plated guide-bar assembly ensure precise cutting. The frame is single piece zinc-plated steel for rigidity, strength and durability. Hinged blade guard allows for easy blade changes. Motor incorporates the heavy duty on/off MK-Safeswitch and a built-in water pump receptacle. Removable thermoplastic water reservoir, 7" diamond blade, submersible water pump and rip guide are all included. Weight 33 pounds. Dimensions: 33" long x 19" wide x 20" high. CSA approved. Includes: drill with Quik-Lok, M18 Redlithium SX 4.0 extended capacity battery pack, M18 & M12 multi-voltage charger, contractor's bag. Powerstate brushless moter provides constant power under heavy load, 17"L, 8.5Lbs., 0-1,200 RPM. Capacity in wood: auger bits up to 1-1/4" and self-feed bits up to 2". High Torque 1/2" Impact Wrench with friction ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts. POWERSTATE brushless motor delivers up to 1,000 ft.-lbs. of fastening torque and 1,400 ft.-lbs. of nut-busting torque. Provides maximum productivity by removing stubborn and high torque fasteners up to 2X faster. 4-mode drive control with bolt removal mode, allowing for ultimate control. 0 to 550/1,400/1,750/1,750-750 RPM and 0-950/1,750/2, 100/2,100 IPM. 4-Mode drive control. REDLINK PLUS intelligence prevents damage to the tool and battery due to overloading or overheating. Premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials. Includes: Impact Wrench, battery, charger and kit box.
Ingersoll-Rand W7150-K2 Cordless Impact Wrench Kit Dewalt D25553K Combination Corded Rotary Hammer Kit TILE SAW 800W
TILE SAW 800W
Our Price: $597.18
High impact cordless impact wrench can produce 780 ft-lb reverse torque and 1,100 ft-lb of nut-busting torque. Steel lined aluminum hammer case is designed to be strong and lightweight. Metal reinforced housing keeps your tool in working order even after repeated drops. 9.4" from tip to tail. (2) 20 volt batteries included. Motor provides high performance and overload protection while impact energy provides fast drilling and powerful chipping, rear handle mount for increased user comfort in down drilling applications, factory set clutch reduces sudden, high torque reactions if bit jams, trigger lock on, rubber grip. Specs: 120V/AC, optimal concrete drilling-3/8-1-1/4", 8.0 ft-lbs of impact energy, no load speed 490 RPM, blows/min 3300 BPM, length 18.6", weight 13.5lbs. Includes: side handle, carrying case. Light-weight and compact saw for high performance cutting. Heavy-duty table with measuring guide. Angle guide plate holds the work piece at various angles. Easily-adjustable cutting guide remains parallel at all times. Easy mounting water tray. Quick-release, tool-free table mount release for easy cleaning and blade replacement. Specs: 120 volt single phase electric motor, 800 watts, arbor 1", max cutting depth 1-7/8", max cutting depth at 45 degrees - 1-7/16", weighs 34 lbs. Includes: parallel cutting guide, angle guide plate, M8 and M19 combination wrench.
Bosch 11264EVS Corded Rotary Hammer Dewalt D24000 Professional Corded Tile Saw Diamond Products 65020 Corded Tile Saw
Variable speed dial, vibration reduction in the hammer mechanism and the grip area provides maximum user comfort for extended periods of work, maintains speed under load and overload protection, delivers 20 percent more power in hammer only mode, rotates and locks chisel into 12 different positions, service light indicates when preventative maintenance is required, cord turret reduces cord wear. Specs: impact energy (ft. lbs.) 7.4 Ft. Lbs./8.1 (turbo), 18" long, max. hole dia. in: concrete-1-5/8", concrete-core bit-4-1/8", no load  BPM is 1,700-2,900, no load  RPM is 170-340, 120V, weighs, 15.1lbs. Includes: (1) 360 degree auxiliary side handle with depth stop, (1) carrying case. Integrated cantilevering rail/cart system allows for 24" ripping capacity, 18" tile on diagonal, stainless steel rail system is integrated into the saw frame, integrated 45/22.5 degree miter feature for quick angled cuts, plunge feature, adjustable dual water nozzles, rear and side water attachments help contain water run-off and blade spray, removable cutting cart for easy cleaning, 5 gallon water pan, edge guide with 2-position,45/90, degree guide, will cut hard materials such as porcelain and stone. Specs: 15.0Amps, blade diameter 10", max rip capacity 24" tile, diagonal cut capacity 18" tile, max depth of cut 3-1/8", pan material, ABS plastic, removable water containment tray, 34"Lx26"W(housing only), weight 69 lbs. Portable, light weight, with easy clean water tray and liquid cooled bearing housing, blade guard includes brush for additional blade cooling protection and overspray. Solid steel frame with convenient carrying handles. Specs: 15amp/115V, rip cut up to 20", diagonal cut to 14", up to 10" blade capacity  with 5/8" arbor, dimensions 39"Lx24"Wx24"H, weighs 43 lbs. Includes: 10" blade, water pump and 45 degree and 90 degree rip guide/miter block.
   
 
1