Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > RIGHT ANGLE DRILLS
Choose a sub category:
ELECTRIC DRILLS POWER TOOLS POWER TOOLS
CORDLESS DRILLS POWER TOOL ACCESSORIES POWER TOOL ACCESSORIES
ELECTRIC HAMMER DRILLS PNEUMATIC TOOLS & ACCESSORIES PNEUMATIC TOOLS & ACCESSORIES
CORDLESS HAMMER DRILLS POWER EQUIPMENT POWER EQUIPMENT
RIGHT ANGLE DRILLS ELECTRIC SCREWGUNS CORDLESS SCREWDRIVERS
ELECTRIC IMPACT WRENCHES CORDLESS IMPACT WRENCHES CORDLESS IMPACT DRIVERS
ELECTRIC CIRCULAR SAWS CORDLESS CIRCULAR SAWS PORTABLE CUT-OFF SAWS
ELECTRIC JIG SAWS CORDLESS JIG SAWS POWER HANDSAWS
ELECTRIC RECIPROCATING SAWS CORDLESS RECIPROCATING SAWS PORTABLE BAND SAWS
ELECTRIC PLANERS PLATE JOINERS ROUTERS
TILE SAWS JAMB SAWS OSCILLATING TOOLS
CORDLESS OSCILLATING TOOLS ELECTRIC SPIRAL CUTOUT SAWS CORDLESS SPIRAL CUTOUT SAWS
POWER SHEARS/SIDING SHEARS PAD SANDERS BELT SANDERS
DETAIL SANDERS POLISHERS ANGLE SANDERS
ROTARY GRINDERS CORDLESS WORK LIGHTING CORDLESS INSPECTION CAMERAS
CORDLESS VACUUMS AND BLOWERS CORDLESS MULTI-TOOL KITS BATTERY PACKS/CHARGERS
INDUST. CONCRETE POWER TOOLS FLOOR SANDING EQUIPMENT JOB SITE RADIOS
MISC HAND POWER TOOLS & ACC
Sort By:
1
Black & Decker AS6NG Cordless Screwdriver Black & Decker LI2000 Cordless Screwdriver SCREWDRIVER 3.6V LITHIUM W/LED
Spindle lock for manual use if desired and for greater control when starting and finishing screws. Forward/reverse slide switch for easy screwdriving and screw removal. Rubber grips provide comfort and control. Narrow nose piece for extended reach in tight places. Specs: 130 RPM, 20 in/lbs of torque An inline grip and compact design makes this 4 volt Max cordless rechargeable screwdriver ideal for tackling a variety of household tasks. Comfortable to use and fits in tight spaces. 180 rpms and 35 in-lbs of torque provide plenty of power for a variety of applications. 3.6 volt Lithium screwdriver, 180 rpm provides good speed with 35.6 in. lbs of torque. Built-in LED light for visibility inside cabinets, closets or outside after dark. Compact size and very light weight at 1.06 lbs. Includes USB charger and screwdriver bit.
SCREWDRIVER 7.2V LITHIUM-ION  DRILL ELECTRIC VSR 3/8 INCH   SCREWDRIVER 4V STORAGE W/8BITS
Lithium-Ion battery for more power and run time. Holds a charge up to 18 months. 1/4" Hex quick-change chuck. Two speeds (200/400 rpm) for versatility. 16 torque/clutch settings. Built-in LED work light. Battery charge level indicator. Torque: 46 in-lbs. Battery capacity: 1300 mAh. Recharging time: 3-5 hours. Adaptor: UL listed. Includes: charger, (4) quick-change hex-shank drill bits and (4) screwdriver bits. 3/8" (10mm) keyless chuck. Powerful 4.2 amp motor. Variable speed (0-3,000 rpm). Lock-On button; built-in belt clip. On-board eight-bit storage plus long lasting Lithium power keeps it all ready at your fingertips making screw driving tasks quicker and easier. From assembling furniture and toys to hanging photos on your walls, on-board bit storage plus cordless convenience helps you finish in a flash.
Rockwell WX252L  Cordless Screwdrivers Skil 6238-02 Corded Drill Black & Decker DR260B Compact Corded Drill
Extended reach screwdriver allows for reaching in tight spots. 4 volt lithium 1.5 Ahr battery. 36 in lbs of torque. LED light. Forward and reverse switch. Includes 6 bit tips and a 5 hour charger. Weighs only 1.1 lbs. Drills through mild steel, hardwood and softwood. Features mid-grip design for balance and control, keyless chuck for fast and easy bit changes, two-finger variable speed trigger for control between low to high speeds. Specs: 6 ft. cord length, max. hole diameter in: hardwood- 3/8"; softwood- 3/4", 120V-50-60Hz, 2,600 no load speed, and weighs 3.2 lbs. Includes carrying bag. Features variable speed reversing for controlled drilling and driving, bubble level, on-board bit storage. Specs: 0-1,500 rpm, capacity in: steel- 3/8", wood- 1". Includes one double ended screwdriving bit and storage bag..
DRILL HAMMER 1/2 INCH         DRILL 3/8 INCH VSR 4.5 AMP    SmartSelect LI4000 Cordless Screwdriver
Powerful 6.0 amp motor, variable speed (0-3300 rpm). Hammer: 0-43,500 BPM. Lock-On button for extended use. Die-cast aluminum gear housing. 360? assist handle. Includes: depth rod, auxiliary handle and chuck key. 3/8" VSR drill with powerful 4.5 amp motor. VSR switch for drilling, driving screws, sanding and many other applications. 0 - 3,000 rpm. Maximum drilling capacity 3/8" in steel; 3/4" in wood. Large trigger with infinite speed control. 3/8" keyless chuck for convenience when changing bits. 10' cord to allow most uses without an extension cord. Weighs 3.96 lbs. This 4 volt Max rechargeable cordless screwdriver is powerful and convenient. Compatible with most micro USB chargers. Features magnetic bit storage and an LED light to illuminate work surfaces. 180 rpm motor; 40 in-lbs torque. Pistol grip for access into tight areas.
Black & Decker BDEDMT Lightweight Compact Corded Drill Skil 6277-02 Corded Drill SCREWDRIVER 4VLITH W/SCREWHOLD
Quick connect system allows for tool free change of a variety of tool attachments. Powerful 4.0 amp motor provides enough power for a full range of applications and attachments. Compact and lightweight design allows user to carry out drilling/driving tasks in confined spaces and with ease. 11 position clutch provides extra level of control to prevent stripping and overdriving screws. Features variable speed trigger for control of drilling speed, keyless chuck for fast and easy bit changes, built-in level for precise horizontal and vertical drilling, lock-on button for extended drilling and soft grip handle. Specs: 0-2,000 rpm no load speed, 120v. cut capacity in: soft wood-3/4", hardwood-3/8", 6' cord and weighs 3.5 lbs. Includes bit index, double-ended driver bit and carrying bag. Screw holder attachment holds screws firmly in place for one-handed operation and easy access to hard to reach spaces. Rapid reloadable cartridge allows you to store 6 bits in the tool; eliminating lost bits and time spent looking for them. Advance the correct bit with a simple slide action; no more fumbling around with small bits. Front mounted LED light means no more working in the dark. Powerful 4 volt MaxLithium battery holds a charge for up to 18 months. Side-mounted switch allows you to operate in reverse and the rubber handle provides a comfortable grip. No load speed of 230/min. Charging time only 5 hours. 1/4" hex chuck size. Weighs only 1.1 lbs. Includes Worx Screwdriver with screw holder, 1 reloadable cartridge with 6 bits (PH1, PH2, SL4, SL6, SQ1 and SQ2) and a 4 volt MaxLithium charger.
Black & Decker DR560 Compact Corded Drill Skil 6445-01 Corded Hammer Drill Hitachi D10VH Lightweight Corded Drill
For drilling holes through and driving large fasteners in wood, metal and plastic. Features variable speed reversing, all metal gear housing, reversing brush system and 360 degree side handle. Specs: 0-900 rpm, capacity in: steel- 1/2", wood- 1-1/2". Includes side handle, chuck key and holder. Variable speed trigger lets user control drilling speed, two finger trigger for increased control. Accepts large diameter bits designed for woodworking and cutting, side-assist handle for controlled, accurate drilling, horizontal bubble level for precise drilling and driving. Specs: no load BPM is 51,000, no load RPM is 3,000, 120V/50 -60 Hz. Includes hammer drill, chuck key side and assist handle. Features variable speed reversing dial located in switch, lightweight, compact, maximum torque of 108.1 in-lbs, form fit palm grip with minimal vibration. Specs:  0-2,500 rpm no load speed, 108.1 in-lbs maximum torque, cut capacity in: wood 1", steel 3/8" and weighs 3.1 lbs.
Rockwell RC3136 Corded Hammer Drill Porter-Cable PC600D Corded Drill DRILL ROTARY HAMMER 1/2IN 7A
Features hammer function for drilling concrete and brick, magnesium gear housing for strength and prolonged life, keyed chuck secures the bit for heavy-duty use and soft grip handle. Specs: 120V/60Hz, 0-2800RPM no-load speed, 0-44800BPM impact rate, max drilling capacity in: wood- 1-1/4", masonry- 1/2", steel- 1/2" and weighs 5 lbs. Includes: 10 ft. cord, auxiliary handle, depth gauge and chuck key. Belt clip holds drill securely while working. Lock-on button provides easier control during prolonged use. Soft grip handle improves user comfort and control. Specs: 0-2,500 rpm no load speed, 6 ft power cord, variable-speed trigger, anti-slip comfort grip and weighs 3.2 lbs. 7.0 amp motor delivers the power and durability to complete the toughest drilling applications. 0-3100 rpm. Cast metal gear housing helps dissipate heat from internal components for additional durability. Hammer drill and drill modes provide versatility for drilling into metal, wood, concrete, brick, block and other masonry materials. Two finger locking trigger provides ease of use during extended use. Beats/Min: 52700 bpm. Side handle provides more control in heavy applications and bind up situations. Includes (1) side handle, (1) depth rod, (1) chuck and key holder. Weighs only 4.5 lbs.
Bosch 1006VSR Corded Drill Black & Decker DR670 Corded Hammer Drill Dewalt D21002 Corded Drill
Features variable speed reversing with ratcheting keyless chuck for minimal slipping, lock-on switch recessed in handle to prevent accidental lock-on, soft grip handle, oversized 2-finger trigger, service minder brushes, and sturdy belt clip. Specs: 8 ft. cord length, 0-2,600 no load rpm, 120V ac rating and weighs 3.4 lbs. Variable speed/reversing switch, soft grip handle, reversing brush system and mid-handle design for balance and comfort, ROC hammer technology for high speed masonry drilling, hammer drill or drill mode for masonry, wood or steel drilling, two speed selector, metal gear housing, 360-degree side handle with depth rod. Specs: 0-1,000 and 0-3,000 RPM, 51,000 BPM, cutting capacity: steel- 1/2", 1-1/4 "- wood, 1/2" -concrete.  Includes:  (1) chuck key & holder, side handle, depth rod, kit box. Powerful 7.0 amp motor gives the user the power to get the job done. Compact design allows for user comfort. Lightweight design decreases user fatigue. Variable speed trigger switch gives you greater versatility. Lock-on switch reduces fatigue. No load speed: 0-2,800 rpm. Maximum watts out: 440. Tool weighs only 3.55 lbs. Capacity in wood (spade bit): 1". Capacity in wood (hole saw): 1-1/8". Capacity in steel (twist bit) 3/8". Includes chuck key.
Dewalt DWD112 Corded Drill Porter-Cable PC700D Corded Drill Milwaukee 0240-20 Right Angle Corded Drill
Variable speed reversing trigger for versatility in drilling and fastening applications with a soft grip handle and all ball-bearing construction that delivers high performance in heavy-duty applications. All metal ratcheting keyless chuck for greater bit retention. Specs: 650w max watts out, capacity in: wood (spade bit) 1", wood (hole saw) 1-1/8" and steel (twist bit) 3/8", single gear reduction, pistol grip handle, anti-slip grip and weighs 4.1lbs. Triple gear reduction provides torque for demanding drilling applications. Soft grip mid handle provides balance and control. Specs: 0-800 rpm, drilling capacity in: steel- 1/2", wood- 1-1/12", 6 ft power cord, variable speed trigger, anti-slip comfort grip, and weighs 4.8 lbs. Includes cast metal side handle, chuck key and holder. Variable speed trigger for fast drilling in wood and metal. All metal gear case provides superior gear support in high torque applications. Soft grip handle and two finger trigger. Specs: Voltage 120 AC only, 0-2800 rpm no load speed, keyless metal chuck, 2-wire 8' cord and weighs 4.25 lbs.
HXP DB3DL2 Adjustable Inline Dual Speed Cordless Screwdriver Kit Prograde Pro Corded Hammer Drill Hitachi FDV16VB2 Corded Hammer Drill
Reversing trigger switch, compact and lightweight fits easily into tight spaces, 21-Stage clutch, integrated LED lights work areas, Bit Lock  for fast and easy bit changes, adjustable 2-position handle, non-slip elastomer grip. Specs: 44 in/lbs torque, no load speed 200/600 RPM, 1/4" hex chuck,1.5Ah Lithium Ion batteries, 30 min. charging time, weighs 0.9lbs. Includes: 3.6V HXP 1.5Ah Lithium Ion batteries, charger, case. Compact and lightweight hammer drill with variable speed control dial, push button reverse switch, one-piece cylindrical housing and aluminum die-cast inner cover and gear cover, oversize trigger switch, elastomer, non-slip grip, removable side handle, 1-1/16" center height that allows better reach into narrow work spaces. Specs: rated power input-590W,0.80HP,  rated power output-310W, 0.42HP, max.power output- 650W, 0.88HP, no load speed 0-2,900/min, no load impact rate 0-46,400/BPM, 111.6in/lbs max. torque, capacity in: concrete-5/8", wood-1", steel 1/2", 10-19/32" long, weighs 3.7lbs. Includes: side handle, depth gauge, injection molded plastic case. Variable speed control dial located on trigger, push button reversing switch, impact to drilling switch, low noise cooling air-flow design, removable side handle, Ball and needle bearing construction for longer tool life, industrial grade keyed chuck, provides greater bit retention, elastomer, non-slip grip. Specs: straight shank, keyed 3-jaw chuck, impact rate is 0-46,400BPM, no load speed is 0-2900RPM, capacity in: concrete-5/8", wood-1", steel-1/2", 2 modes of operation, switch is EVS, reversible, 11-11/32 long, weighs 3.5lbs. Includes: side handle, depth gauge, chuck key, injection molded plastic case.
Dewalt DWE5010 Hammer Drills Makita 6408K Corded Drill Dewalt DW920K-2 Adjustable Inline Cordless Screwdriver Kit
Single speed hammer drill. 7.0 amp motor provides high performance and overload protection. Dual mode: hammer drill/drill for wood, steel or masonry applications. Lightweight design for extended use and less user fatigue weighs only 4.3 lbs. Two-finger, rubber trigger for user comfort. 360 degree side handle with depth rod offers greater control, versatility and increased depth accuracy. Variable speed allows for precise hole placement on work surface. Compact design (10.3" length) allows for comfortable use and easy access to tight spaces. Lock-on trigger gives the option to keep the drill running continuously when doing repetitive applications. Features variable speed /reversing for drilling in a wide variety of materials, low decibel rating (79dB). in-line handle, large recessed lock-on button, all-ball bearing construction and large trigger switch. Specs: 0-2,500 rpm no load speed, capacity in: steel- 3/8", wood- 1" and weighs 3.1 lbs. Includes keyless chuck and plastic tool case. Variable speed and reversing trigger, adjustable two-position handle allows for operation as both in-line and pistol-grip, electric brake provides increased productivity, heavy duty metal hinge provides secure and sustained two position lock, quick screwdriver bit change. Specs: no load speed 0-500RPM, 1/4" hex drive, 80 in/lbs. of max torque, weighs 3.5lbs. Includes: (1) one hour charger, (2) 7.2V compact batteries, (2) screwdriver bits, kit box.
Hitachi D13VF Corded Drill Porter-Cable PC70THD Corded Hammer Drill Kit Dewalt DW235G Corded Drill
Features variable speed control trigger, cast aluminum gear housing, double gear reduction, oversized reversible switch and trigger lock, removable side handle, and belt hook. Designed to fit in hand for improved control with minimal vibration. Specs: 0 to 850 rpm no-load speed, 416 in-lbs max torque, drilling capacity in: wood- 2-9/16", steel- 1/2", hole saw- 4-1/2" and weighs 4.6lbs. Includes chuck key, side handle, handle joint, injection molded carrying case. Dual speed transmissions provides maximum torque in setting one and maximum speed in setting two. Hammer drill and drill modes provides versatility for drilling into metal, wood, concrete, brick, block and many other materials. Cast metal gear housing helps dissipate heat from internal components for additional durability. Includes cast metal side handle, depth rod, chuck key and holder. Specs: 0-1,100 & 0-3,100 rpm, 52,700 bpm, 1/2" capacity in steel, 1-1/4" capacity in wood, 1/2" capacity in concrete, 6' power cord, variable-speed trigger, anti-slip comfort grip and 5.1 lbs weight. Variable speed and reversing switch, metal gear housing for jobsite durability, made of helical cut steel, heat treated gears, two finger trigger for increased comfort.  Specs: 0-850 rpm no-load speed, 600 watts maximum output power, 360 degree side handle, double gear reduction. Includes: chuck key with holder.
Max DCF610S2 Single Speed Standard Cordless Screwdriver Kit Black and Decker DCF680N1 Cordless Screwdriver Kit Makita HP1641K Industrial Corded Hammer Drill Kit
Compact, lightweight tool at only 2.2 lbs is designed to fit into tight areas. One-handed loading 1/4" hex chuck accepts 1" bit tips. 3 LEDs provide light and increased visibility without shadows. 15.0 clutch settings. 160 UWO max power. No load speed: 0-1,050 rpm. The kit includes: (1) 1/4" Screwdriver, (2) 12V Max Lithium Ion battery packs, (1) fast charger, (1) belt hook and (1) contractor bag for convenient storage. Motion activation variable speed and reversing control for precise fastening control. Variable speed 0-430 rpm for fastening into wood, plastic and light gauge metal. Adjustable two-position handle allows for operation in either in-line or pistol grip. Allows control when completing light fastening applications. Allows illumination in confined areas without shadowing. Battery state of charge on tools allows end users to know when to charge packs. Allows for quick screwdriver bit change and holds 1" bit tips. 8 volt max battery pack allows for longer run time and charges in one hour. Tool weighs only 1.1 lbs. Includes: 1 charger, (1) 8 volt max compact battery and kit bag. Lightweight, all ball bearing construction for longer tool life with two modes of operation, hammering with rotation and rotation only, ergonomic handle with rubberized soft grip, extended service life of carbon brushes, recessed lock on button for continuous use. Specs: capacities in: concrete-5/8", steel 1/2", wood-1-3/16", no load RPM 0-2,800, BPM 0-44,800, 11-7/8" long, weighs 4.3lbs. Includes: side handle, depth gauge, keyless drill chuck, plastic case.
Milwaukee 5376-20 Corded Hammer Drill Dewalt DW511 Corded Hammer Drill DRILL HAMMER 2/SPD 8.5A 1/2IN
Equipped with a removable 360 degree side handle that also assists in setting the depth rod for pre-set hole drilling. Metal gear housing. 2-mode operation, hammer drill and drill only modes for concrete, wood, and metal. Over-mold increases grip and reduces user felt vibration. Specs: 0-2,800 no load rpm, 0-48,000 no load bpm, 1-1/4" wood capacity-hole saw, 1/2" metal capacity-twist bit, 5/8" concrete capacity, 8 ft fixed cord type, trigger lock, and weighs 4.9 lbs. Lightweight for extended use with variable speed, dual mode hammerdrill/drill for wood, steel or masonry applications, 360 degree side handle with depth rod, two-finger, rubber trigger. Specs: max watts out 650W, no load speed 0-2,700RPM, blows/Min 0-46,000BPM, capacity in: steel 1/2", wood 1-1/4", concrete optimum 5/32-3/8", 11-1/2" long, weighs 4.3lbs. Includes: side handle, depth rod, chuck key with holder. Features a muscular 8.5 amp motor that handles all masonry drilling applications, delivering a max of 51,000 BPM for muscles and durability. The tool's drilling capacities range from 3/4" for masonry applications to 1-1/2" for wood. The HG 18-2 features a torque control auxiliary handle, which locks into place; the handle has a built-in depth gauge. The dual mode selector easily converts from rotation only to hammer drill mode. A rotating brush plate allows users to easily back out bound-up bits. It has two speed settings, one for high speed and one for high torque. Because of its heavy duty three jaw 1/2" chuck, the tool has a high clamping force that prevents drill bits from slipping. This robust drill has a metal front housing for longer life, a pistol grip handle with soft-grip design and an integral slip clutch for security against recoil. Includes (1) 360? auxiliary handle and (1) depth gauge.
Magnum 0299-20 Corded Drill Magnum 0300-20 Corded Drill Dewalt DWD210G Corded Drill
Features an all metal gear case and diaphragm, heavy-duty chuck, 360-degree locking side handle, ergonomic textured grip and two finger trigger for user comfort and balance. Specs: 120V AC, 0-850 rpm no load speed, drilling capacity in: wood (auger bit)- 1-1/2", wood (self-feed bit)- 2-9/16", metal (hole saw)- 2", 1/2in-20 spindle, double gear train, 8 ft. fixed 3-wire rubber cord and weighs 5.4 lb. Includes side handle and chuck key with holder. Features an all metal gear case and diaphragm, heavy-duty chuck, 360-degree locking side handle, ergonomic textured grip and two finger trigger for user comfort and balance. Specs: 120V AC, 0-850 rpm no load speed, drilling capacity in: wood (auger bit)- 1-1/2", wood (self-feed bit)- 2-9/16", metal (hole saw)- 2", 1/2in-20 spindle, double gear train, 8 ft. fixed 3-wire rubber cord, soft grip handle and weighs 5.4 lb. Includes side handle and chuck key with holder. Features a variable speed reversing switch, motor generates 50 percent more power with increased overload protection for added durability, soft grip handle and two-finger trigger, 360 degree locking side handle for greater control and versatility, metal gear housing for jobsite durability and increased reliability. Specs: 980W max watts out, drill capacity in: wood (spade bit) 1-1/2", wood (hole saw) 3-5/8", steel (twist bit) 1/2", wood (self-feed) 2-9/16", wood (auger bit) 1-1/2", steel (hole saw) 2", double gear reduction, handle style pistol grip design, anti-slip grip and weighs 4.9lbs. Includes 360 degree locking side handle with soft grip and chuck key with holder.
Milwaukee 2101-21 Cordless Screwdriver Kit Magnum 0201-20 Right Angle Corded Drill Dewalt DCD740B Right Angle Compact Cordless Drill/Driver Kit
Features 21 position clutch setting with auto shut-off and 44" pounds of torque. 2-speed gearbox 200/600 rpm. 45 minute charge time. 1/4" hex drive size. Kit includes: (1) M4 1/4" hex screwdriver, (1) M4 2.0 battery and (1) M4 charger. All metal gear case and diaphragm. 360-degree locking side handle. All metal Grip-Lok, 2-sleeve keyless metal chuck. Ergonomic tactile soft grip and 2-finger trigger. Specs: 0-2500 rpm no load speed, capacity in: wood (flat boring bit) 1-1/2", wood (hole saw) 2-1/4", metal (twist bit) 1/2", 3/8in.-24 spindle, double gear train, 10' fixed 2-wire rubber cord, double insulated and weighs 4.1 lbs. Includes side handle. Compact front to back length. Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger. Specs: 360UWO, 2 speed settings, 0-650/0-2,000, plastic ratcheting chuck and weighs 3 lbs. Includes tool only with belt hook and 2" Phillips tip bit.
Dewalt DW505 Corded Hammer Drill Milwaukee 5378-21 Corded Hammer Drill Kit Milwaukee 5378-20 Corded Hammer Drill
High/low gear for high speed drilling, or high toque applications. Dual mode for hammerdrill/drill used  in wood, steel or masonry applications. Features two finger, rubber trigger. Specs: 6500W max watts out, 0-1,200/0-2,700rpm no load speed, 0-19,000/0-46,000bpm, capacity in: optimum- 5/32- 3/8", steel- 1-1/2", wood- 1/2" and weighs 4.8lbs. Includes 360-degree locking side handle, steel depth rod, chuck key with holder and kit box. Features variable speed, reversing, two mode selection for hammer with rotation or rotation only, synchronized gear shift, ergonomic soft grip handle, two finger trigger switch, self stop brush system. Specs: 120 AC, 0-1,350/0-2,500rpm no load, 0-20,000/0-40,000 bpm, capacities in: wood- 3-3/4", metal-twist bit- 1/2", concrete- 3/4", self-feed bit- 1-3/4", 10 ft. fixed cord, trigger lock and weighs 6.0 lbs. Includes side handle, depth gauge, chuck key and impact resistant carrying case. Features variable speed, reversing with dual range speed control, hammer with rotation or rotation only, removable side handle and self-stop brush system. Specs: 120 AC, 0-1,350/0-2,500rpm no load, 0-20,000/0-40,000 bpm  no load, capacities in: concrete- 3/4", metal/twist bit- 1/2", wood- 3-3/4", self-feed bit capacity- 1-3/4", 10ft. fixed cord, trigger lock and weighs 6.0lbs. Includes side handle, depth gauge and chuck key.
Makita HP2050F Corded Hammer Drill Dewalt DW245 Corded Drill Dewalt DWD215G Corded Drill
Drill has variable speed, reversing, built in LED light illuminates drilling edge and increases visibility with a bulb that never needs replacing, two modes, hammering with rotation and rotation only, positive stop mode selector prevents accidental mode disengagement, built in torque limiter, large trigger switch and 360 degree swivel side handle, recessed lock-on button, ball bearing construction, ergonomic shape with rubberized grip, air vent holes supply required ventilation. Specs: capacities in: concrete-3/4", steel (low) 1/2" (high) 5/16", wood-1-9/16", no load RPM (low) 0-1,200 (high) 0-2,900, BPM (low) 0-24,000 (high) 0-58,000, 14-1/4' long, weighs 5.6lbs. Includes: side handle, depth gauge, chuck key, tool case. Drill has variable speed reversing and is made from helical-cut steel with heat-treated steel gears for long life and durability, metal gear housing for jobsite durability and increased reliability, two-finger, rubber trigger for increased comfort, triple gear reduction, 360 degree side handle. Specs: 0-600rpm no load speed, max watts out 600W, capacity in wood (spade bit) 1-1/2", (hole saw) 4", (self-feed) 2-9/16", (auger bit) 1-1/2", capacity in steel (twist bit) 1/2", (hole saw) 2-3/4", triple gear reduction, handle style pistol grip, weighs 4.4lbs. Includes: 360 degree side handle, chuck key with holder Features variable speed reversing switch for increased versatility, 1/2" all metal single sleeve ratcheting keyless chuck with automatic spindle lock, soft mid handle grip. Specs: 0-1,200 rpm no load speed, 980 W max watts out, drilling capacity in: wood: (spade bit)- 1-1/2", (hole saw)- 3-5/8", (self-feed)- 2-9/16", (auger bit)- 1-1/2", steel: (twist bit)- 1/2", (hole saw)- 2", double gear reduction, anti-slip grip and weighs 5.2 lbs. Includes 360 degree locking side handle with soft grip.
M12 2415-21 Right Angle Cordless Drill/Driver Kit Magnum 0234-6 Corded Drill Dewalt DW160V Right Angle Corded Drill
Built in electronics include variable speed control, an electronic clutch, 11 settings plus drill mode, fuel gauge,and overload protection, single sleeve ratcheting chuck, extended paddle switch, LED's illuminates work surface. Specs: 12V. no load speed is 800RPM, 100 in/lbs torque, head length is 3-3/4", single sleeve, ratcheting, Lituium-Ion battery, 11.75" long, weighs 2.43lbs. Includes: (1) M12 Red Lithium battery, (1) 30-minute charger, (1) carrying case. Features trigger speed control, reversing, a Quik-Lok cord that can be removed from drill for storage or service replacement, brush cartridge system with a set of spare brushes.  Specs: 120v AC, 0-950rpm no load speed, capacity in: wood (auger bit) 1-1/2", (self feed bit)  2", metal (hole saw)  2", 1/2 in.-20 spindle, double gear train, 8ft cord, grounded, trigger lock and weighs 4.8 lbs. Includes side handle, chuck key with holder. Compact for easy access in tight places with variable speed reversing, paddle switch, shielded chuck, 100 percent ball bearing construction, double gear reduction increases torque performance, decreases gear stress, pistol grip handle. Specs: no load speed 0-1,200RPM, max watts out 200W, capacity in: wood (spade bit)-1-1/8", wood (hole saw)-1-1/8", steel (twist bit)-3/8", (hole saw)-3/4", gear reduction double , anti-slip grip, anti-lock control, spindle lock , weighs 3.75lbs. Includes: chuck key with holder.
ANGLE DRILL CORDLESS 18V 3/8IN Dewalt DWD520K Corded Hammer Drill Kit Makita DP4000 Lightweight Corded Drill
Generates 50 percent more power with increased overload protection for added durability. Dual mode for versatility in masonry, wood, or steel drilling applications. Features two speed range, high speed or high torque, soft grip handle, two finger trigger and metal gear housing. Specs: 980W max watt out, 0-1,200/0-3,500rpm no load speed, 0-56,000bpm, capacity in: steel- 1/2", wood- 1-1/2", concrete optimum 5/32-7/16", 14" long and weighs 6.0lbs. Includes 360 locking side handle, steel depth rod, chuck key with holder and kit box. Reversible, variable speed. Retractable belt clip, ergonomic rubberized grips, large trigger switch, comfortable side handle rotates 360 degrees, all ball and needle bearing construction, brushes are easily accessible, double insulated. Specs: capacity in:  steel 1/2", wood 1-1/2"; 0-900 RPM no load speed, weighs 4.8 lbs. Includes: chuck key, side handle.
Makita DS4011 Corded Drill Makita HR2475 Corded Rotary Hammer Drill Bosch HD21-2 Duel Corded Hammer Drill
Powerful motor engineered for improved drilling and mixing performance; provides increased speed and torque for drilling large holes, balanced for reduced operator fatigue. D-handle rotates 360 degrees with 24 positive stops for multi position operation. Specs: AMPS (120V), capacities in wood: (auger bit 1-7/16"), (self feed-2-9/16"), (hole saw-5"), in steel: (twist bit) 1/2", (hole saw) 3", no load speed 600 RPM, overall length  13-3/8", weighs 6.3 lbs. Includes: (1) 1/2" spade handle drill, (1) drill chuck, (1) chuck key, (1) side handle and On-board chuck key storage for fast and convenient bit changes. Variable speed with 3-Mode operation rotation only, hammering with rotation and hammering only, ergonomic D-shaped handle with rubberized soft grip, accepts SDS-PLUS bits, one touch sliding chuck, built-in torque limiter, 'No hammering when idling' function, extended service life of carbon brushes, recessed lock on button, 40 different bit angle settings. Specs: 7AMP, impact energy is 2.7 ft./lbs., no load BPM is 0-4,500, no load RPM is 0-1,100, capacity in: concrete 1", steel-1/2", wood-1-1/4", 16-7/8" long, weighs 6.6lbs. Includes: (1) rotary hammer, (1) 360 degree auxiliary handle, (1) depth gauge, (1) carrying case. Includes: (1) rotary hammer, (1) auxiliary handle, (1) depth gauge, (1) plastic tool case. Dual-mode selector converts from rotation only to hammer drill mode. Ergonomic pistol-grip handle. Integral slip clutch helps minimize torque reaction. Features rotating brush plate, metal gear housing and 2 speeds. Specs: 3-jaw chuck, max hole in: concrete- 7/8", wood- 1-5/8", metal- 5/8", 0-900/0-3000 no load rpm, 0-18000/0-54000 no load bpm, 13.5" long and weighs 10.9 lbs. Includes 360-degree auxiliary handle, depth gauge and carrying case.
Milwaukee 5262-21 Corded Rotary Hammer Kit DRILL HAMMER SDS1IN PISTOL GRP DRILL HAMMER 1IN SDS ROTARY
Features a lightweight design to provide ease of use and reduce user fatigue. Mechanical clutch protects tool when bit binds up. 3-mode operation: rotary hammer, hammer only and rotation only. Variable position chisel stop allows steel to be adjusted for work in any orientation. Specs:1.8 ft-lbs impact energy, 0-1,500 no load rpm, 0-5625 no load bpm, 10 ft cord length, double insulated, D-handle style, 2-1/2" thin wall core bit capacity, and weighs 5.8 lbs. Pistol grip hammer drill. 2.6 Joules of impact energy for fast drilling and chipping speed. 8.0 amp high performance motor. Rotating brush ring delivers full speed/torque in forward and reverse. Integral clutch reduces sudden, high torque reactions if bit jams. No load speed: 0-1500 rpm. Variable speed switch. Tool length: 13.25"; Tool weight: 5.8 lbs. Kit includes 360 degree side handle, depth rod and kit box. 2.8 joules of impact energy for fast drilling and chipping speed. Shocks - active vibration control, reduced vibration felt in the handles. 8.0 amp high performance motor. Rotating brush ring delivers full speed/torque in forward and reverse. Integral clutch reduces sudden, high torque reactions if bit jams. Variable speed switch. No load speed 0-1500 rpm. Tool length: 16.75"; Tool weight: 6.6 lbs. Includes 360 degree side handle, depth rod and kit box.
Makita HP2070F Corded Hammer Drill Dewalt DCD740C1 Right Angle Compact Cordless Drill/Driver Kit Milwaukee 5387-22 Corded Hammer Drill Kit
Drill has variable speed, conveniently located reverse slide switch, built in LED light illuminates drilling edge and increases visibility with a bulb that never needs replacing, two modes, hammering with rotation and rotation only, positive stop mode selector prevents accidental mode disengagement, built in torque limiter, large trigger switch and 360 degree swivel side handle, recessed lock-on button, ball bearing construction, ergonomic shape with rubberized grip, air vent holes supply required ventilation. Specs: capacities in: concrete-3/4", steel (low) 5/8" (high) 5/16", wood (low)-1-9/16" (high) 1", no load RPM (low) 0-1,200 (high) 0-2,900, BPM (low) 0-24,000 (high) 0-58,000, 14-1/4' long, weighs 5.6lbs. Includes: side handle, depth gauge, chuck key, tool case. Dual speed ranges for increased user flexibility providing a wide range of applications. Compact front to back length allowing users to fit into hard to reach spaces. Multi-grip trigger provides comfort and convenience. Spec: 360 UWO, 2 speed settings, 0-650/0-2000 rpm, 3/8" plastic ratcheting chuck. Includes 20V max 1.5 Ah compact li-ion battery, 30 minute fast charger, belt hook, 2" phillips tip bit and kit box. Motor provides overload protection. Metal gear case can withstand daily jobsite abuse. Lightweight balanced design reduces operator fatigue. Dual speed motor optimized for concrete fastening. Specs: 120 AC, 0-16,000/0-40,000 bpm no load, 0-1,000/0-2,500 rpm no load speed, capacity in: steel- 1/2", concrete- 3/4", 10 ft. Quik-Lok cord, and weighs 6.4 lbs. Includes side handle, depth gauge, chuck key and carrying case.
SCREWGUN DRYWALL 20V MAX XR   Bosch 11255VSR Bulldog Rotary Hammer Drills Dewalt DW130V Corded Drill
Up to 4,400 rpm provides greater speed. Brushless motor delivers maximum run time. Balanced and ergonomic. Nosecone locks on securely and is easily removed while maintaining consistent screw depth. 1/4" hex drive; 8.75" tool length. Weighs only 3.3 lbs. Kit includes: (1) Max XR Li-Ion brushless drywall screw gun, (1) Multi-voltage charger, (2) 20 volt Max XR compact Li-Ion batteries (2.0 Ah) and a handy bag to carry it all. HammerHook allows quick tool storage during the job. 0-1,300 rpm; 0-5,800 bpm. Multi-function selector provides 3 modes of operation: rotation only, rotary hammer and hammer-only mode. Vario-Lock positioning rotates and locks chisel into 36 different positions to optimize working angle. Rotating brush plate provides equal power in forward and reverse. Cord Turret 35" pivot for added flexibility and longer cord life. SDS-plus bit system tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. D-handle design is ideal for overhead and downward drilling applications. Variable speed reversing trigger for accurate bit starting as well as removing fasteners or bound bits. Integral clutch helps minimize torque reaction. Features variable speed reversing switch avoids air bubbles when mixing mud and offers greater control when drilling. Specs: 600 watts max power output, 0-550 rpm no-load speed, triple gear reduction, drilling capacity in: wood (spade bit) 1-1/2", wood (self-feed) 2-9/16", wood (hole saw) 5", wood (auger bit) 1-1/2", steel (twist bit) 1/2", steel (hole saw) 3" and weighs 7.5 lbs. Includes 3 position side handle, 2-position rear spade handle chuck key and holder.
Makita DA3010F Right Angle Corded Drill Milwaukee 1660-6 Compact Corded Drill DRYWALL SCREW GUN KIT COMPACT
Compact, easy use between framing studs or any other close quarter application with variable speed for controlled drilling in wood/metal and speedy fastening, built in shock proof, high output, white LED light illuminates drilling area with a bulb that never needs replacing throughout the life of the tool, paddle switch with speed limiting dial, reduced head height, ball bearing construction. Specs: capacity in: wood-13/16", steel-3/8", no load RPM is 0-2,400, 10-5/8" long, weighs 3.1lbs. Includes: grip complete, chuck key, key holder. Extra long handles, two handed operation for large hole drilling or material mixing, 450 rpm operating speed, for large bits or any hi-torque application. Heat treated gears are helical-cut for quiet performance. Specs: voltage  120 AC , wood capacity: (auger bit) 1-1/2", (hole saw) 4", metal capacity (twist bit)  1/2", spindle  5/8 in.-16, triple gear train, 8 ft. fixed cord, grounded, weighs 11.4 lbs. Includes: pipe handle, chuck key, flexible key holder. The M18 FUEL Drywall Screw Gun is faster than corded models and features AUTO START functionality and delivers up to 3X longer run time than other cordless competitors. The POWERSTATE Brushless motor spins at 4,500 RPM resulting in faster productivity. AUTO START feature automatically starts the motor on contact with drywall providing less noise between screws and 3X longer run time. Includes: M18 Drywall Screw Gun, M18 Red Lithium battery pack, contractor bag, M18 & M12 multi-voltage charger, PR2 bit, and belt clip.
Milwaukee 2615-21CT Right Angle Cordless Drill Kit Makita HP2010N Corded Hammer Drill Duraspin 7W0001N Auto-Feed Cordless Screwdriver
Features 3.75" head length, electronic clutch with 11 settings plus drill mode for complete control in fastening applications, extended multi-position handle and built in LED's. SPEC: 0-1500 no load speed, 100 in-lbs torque, multi-position trigger, 30 min charge time and weighs 3.7 lbs. Includes M18 Compact Red Lithium battery pack, 30 minute charger and carrying case. Variable speed switch, 2-speed gear change, depth gauge, all ball and needle bearings for long tool life, adjustable side handle, double insulated. Specs: capacity in: concrete-(high) 1/2" (low)-3/4", steel-(high) 1/4"  (low)-1/2" , wood-(high)-3/4" (low)-1-1/2", no load RPM (high) 0-2,300 (low) 0-900, BPM (high) 0-46,000 (low) 0-18,000, 13-3/4" long, weighs 6.4lbs. Includes: drill chuck, chuck key, side handle, depth gauge, steel tool case. Li-Ion auto feed screwdriver. 5000 rpm high speed motor. Corner-fit feed system. Tool-free screw length adjustment. Precise depth of drive adjustment with depth lock. Quick slide button bit change. Variable speed trigger with lock and reverse. Belt hook right or left handed adjustable. Drives #6 - #8, Screw lengths: 1" - 2". Includes (2) 18 volt Li-Ion batteries, (1) charger, (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag and (2) drive bits.
DuraSpin 2P0001N Cordless Collated Screwdriver Milwaukee 3107-6 Right Angle Corded Drill Kit Dewalt DW120K Right Angle Corded Drill Kit
High torque motor for heavy-duty applications, jobsite portability, fully integrated (no attachments) design for better balance, smoother operation, and less user fatigue, no more stripped out heads and improved bit life, adjustable depth-of-drive. Specs: 2500RPM, weighs 6.0lbs. Includes: (2) 18 volt Li-Ion batteries, (1) charger, (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag, (1) square bit and (1) Phillips bit. D-handle right angle drill kit with a powerful 7 amp motor. Delivers trigger speed control in two ranges: 0-335/0-750 rpm plus reverse. Torque offers 1/2" capacity in steel. Heavy duty 1/2" keyed chuck with holder provides an industrial hold during drilling and fastening. Versatile: handles up to a 4-5/8" Self feed bit. Quik-Lok 8 ft 3-wire grounded rubber cord provides easy storage and field replacement. Weighs 10.3 lbs. 120V AC. No load rpm 0-500. This kit includes: (1) 1/2" D-Handle right angle drill, (1) 3/16" socket wrench, (1) 9/16" open end wrench, (1) RAD assembly and (1) side handle. Three speed ranges offer versatility of matching the appropriate speed to the application, right angle drilling and straight drilling, die cast metal gear housing, 5-position side handle, 360 degree right angle attachment, triple gear reduction provides increased torque and reduces gear stress, double insulated, meets OSHA Standards, U. L. Listed. Specs: no load speed is 400/600/900RPM, max watts out is 580W, capacity in: wood (spade bit)-1-1/2", (self-feed)-2-9/16", (hole saw)-4", Wood (auger bit)-1-1/2", in metal: (twist bit)-1/2",  (hole saw)-5", triple gear reduction, weighs 9.75lbs. Includes: chuck key with holder, 5-position side handle, Allen wrench, kit box.
Bosch RH328VC Corded Rotary Hammer Hole-Hawg 1675-6 Right Angle Corded Drill Super Hawg 1680-21 Right Angle Corded Drill
Variable speed 3 finger trigger, SDS-Plus tool-free bit changes, 3 modes of operation, rotation only, rotary hammer and hammer only mode, vario-lock positioning rotates and locks chisel into 36 different positions, padded rear handle, 360 degree auxiliary handle with built-in depth gauge, integral clutch, double insulated, UL listed, complies to OSHA. Specs: 120V, impact energy is  2.6 ft./lbs., optimal concrete capacity range: 1/4"-7/8",max. hole diameter in: concrete-1-1/8", concrete-thin wall core bit-3", steel-1/2", wood-1-1/4", no load BPM 0-3,900, no load RPM 0-850 ,  weighs 9.3lbs., 12' cord, 15-1/4" long. Includes: (1) rotary hammer, (1) auxiliary handle, (1) depth gauge, (1) carrying case Powerful, yet compact for large hole drilling between joists and studs, two speed ranges increase the versatility of this drill, hi-torque and hi-speed for the heavy duty user with an extra long pipe handle that helps you control the power. Specs: 120AC, no load RPM is 300/1,200, capacity in: wood-(auger bit)-1-1/2", (self-feed bit)-4-5/8", metal (twist bit)-1/2", spindles 5/8"-16, triple gear train, 8 ft. fixed cord, grounded, weighs 11.5lbs. Includes: pipe handle. Two operating speeds with a clutch in the low gear range, speed shifting is easy, easy turn gear shift knob, comfort grip handle features 3 positions with 90 degree left-right rotation for maximum operator comfort for all applications. Specs: 120A, no load RPM is 450/1,750, low speed clutch, capacity in: wood (self-feed bit)-4-5/8", (hole saw)-6", metal (twist bit)-1/2", spindle  5/8 in.-16, triple gear train, 8 ft. fixed cord, grounded, 22" long, weighs 14.7lbs. Includes: side handle.
Hitachi DH38YE2 Corded Rotary Hammer HAMMER ROTARY SDS 1-9/16IN    DRILL RIGHT ANGLE 18V LITHIUM
HAMMER ROTARY SDS 1-9/16IN
Our Price: $416.98
Two modes of operation, hammer only and hammer drilling, low vibration levels, 18.8m/s2 (full load), low noise levels of only 95.2 dB (full load), safety clutch shuts down rotation in the event of a bound bit, dust proof cover, auto-stop carbon brushes, sealed grease system, soft elastomer handle, adjustable 360 degree side handle. Specs: full-load speed is 510RPM, full-load impact is 2,800BPM, solid bit capacity is 1-1/2", core bit capacity is 4-1/8", 16-11/32" long, weighs 14.1 lbs. Includes side handle, dust cover, depth stopper and case. Two modes of operation, hammer only and hammer drilling. Designed to take on a variety of tasks including drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods. Features large change lever, oversize trigger switch, soft over-molded handle, and 360 degree side handle. Specs: Vibration Level 16.5m/sec2, No Load Speed 620/RPM, Impact Rate 2,800/BPM, Impact Energy 6.3ft/lbs., Drill Bit Capacity: 1-9/16", Core Bit Capacity: 4-1/8", Weight: 15.6lbs. Includes: side handle, depth stopper rod, grease and carrying case. Includes: drill with Quik-Lok, M18 Redlithium SX 4.0 extended capacity battery pack, M18 & M12 multi-voltage charger, contractor's bag. Powerstate brushless moter provides constant power under heavy load, 17"L, 8.5Lbs., 0-1,200 RPM. Capacity in wood: auger bits up to 1-1/4" and self-feed bits up to 2".
Dewalt D25553K Combination Corded Rotary Hammer Kit Bosch 11264EVS Corded Rotary Hammer
Motor provides high performance and overload protection while impact energy provides fast drilling and powerful chipping, rear handle mount for increased user comfort in down drilling applications, factory set clutch reduces sudden, high torque reactions if bit jams, trigger lock on, rubber grip. Specs: 120V/AC, optimal concrete drilling-3/8-1-1/4", 8.0 ft-lbs of impact energy, no load speed 490 RPM, blows/min 3300 BPM, length 18.6", weight 13.5lbs. Includes: side handle, carrying case. Variable speed dial, vibration reduction in the hammer mechanism and the grip area provides maximum user comfort for extended periods of work, maintains speed under load and overload protection, delivers 20 percent more power in hammer only mode, rotates and locks chisel into 12 different positions, service light indicates when preventative maintenance is required, cord turret reduces cord wear. Specs: impact energy (ft. lbs.) 7.4 Ft. Lbs./8.1 (turbo), 18" long, max. hole dia. in: concrete-1-5/8", concrete-core bit-4-1/8", no load  BPM is 1,700-2,900, no load  RPM is 170-340, 120V, weighs, 15.1lbs. Includes: (1) 360 degree auxiliary side handle with depth stop, (1) carrying case.
   
 
1