Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > ELECTRIC DRILLS
Choose a sub category:
HAND POWER TOOLS HAND POWER TOOLS HAND POWER TOOLS
HAND POWER TOOLS HOBBY TOOLS/ENGRAVERS HOBBY TOOLS/ENGRAVERS
HOBBY TOOLS/ENGRAVERS HOBBY TOOLS/ENGRAVERS BENCH & STATIONARY
BENCH & STATIONARY BENCH & STATIONARY BENCH & STATIONARY
STATIONARY POWER TOOL ACC STATIONARY POWER TOOL ACC STATIONARY POWER TOOL ACC
STATIONARY POWER TOOL ACC HEAVY DUTY VACUUMS & ACCESS HEAVY DUTY VACUUMS & ACCESS
HEAVY DUTY VACUUMS & ACCESS HEAVY DUTY VACUUMS & ACCESS POWER/PRESSURE WASHERS & ACCES
POWER/PRESSURE WASHERS & ACCES POWER/PRESSURE WASHERS & ACCES POWER/PRESSURE WASHERS & ACCES
Sort By:
1
ROD WELDING 1LB 1/8IN MILD STL ROD WELDING AC/DC 3/32INCH 1LB ROD WELDING 1LB 3/32IN MILDSTL
E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
ROD WELDING LOW H 3/32IN 1LB  ROD WELDING LOW H 1/8INCH 1LB ROD WELDING AC/DC 1/8 INCH 1LB
E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
ROD/ELECTRD WELDING 3/32IN 1LB ROD/ELECTRD WELDING 1/8IN 1LB ROD WELD GEN PURP 1LB 5/64IN
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
ELECTRODE STEEL 1LB 1/16IN    WIRE MIG 0.035 MILD STL       WIRE WELDING MIG .030INCH 2LB
General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. ER 70S-6 mild steel. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Yellow color coding on label. Required shielding gas: Argon/CO2. Recommended Polarity: DCEP Reverse Polarity. Tensile Strength (PSI): 70,000. Wt. 2 lb. ER 70S-6 mild steel. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Yellow color coding on label. Required shielding gas: Argon/CO2. Recommended Polarity: DCEP Reverse Polarity. Tensile Strength (PSI): 70,000. Wt. 2 lb.
ROD BRAZING BRZ FLUX 3/32X18IN WIRE MIG 0.023 MILD STL       ROD AC LOW HYDROGEN 5/32IN 5LB
Formulated for high tensile strength and ductility. Smooth flowing. Excellent for most brazing uses. Flux coated for best cleaning action. Yellow color coded. Tensile Strength: 65,000 PSI. Melting Point: 1,598? F (870? C). ER 70S-6 mild steel. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Yellow color coding on label. Required shielding gas: Argon/CO2. Recommended Polarity: DCEP Reverse Polarity. Tensile Strength (PSI): 70,000. Wt. 2 lb. Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Diameter (Inches): 5/32" Weight Lbs. (Kg): 5 (2.26) Tensile Strength (PSI): 84,000 Amperage: 140-190
ROD WELD MILD STL 5/32IN 5LBS ROD WELDING 5LB 1/8IN MILD STL ROD/ELECTRD WELDING 1/8IN 5LB
General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160.
ROD WELD 7018 MILD 5/32IN 5LB ROD/ELECTRD WELDING 5LB 3/32IN ROD WELDING AC/DC 1/8 INCH 5LB
E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
ELECTRODE CAST IRON 1LB 1/8IN ROD/ELECTRD WELDING 5/32IN 5LB ROD WELDING MILDSTL 5LB 3/32IN
Nomacast hard cast iron features a non-conductive coating; great for welding dirty, heat affected and oxidized cast iron; ideally suited to cladding contaminated casting prior to joining with high nickel alloys; non-machinable; RC 39 hardness. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
ELCTRD F/AC WLDR 5LB          ELCTRODE 3/32IN 5LB F/SM WLDRS WIRE WELD ALUM MIG .030IN 1LB
E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. Features 5% magnesium content and a bright finish. It flows freely at 1,180 degrees F (637.8 degrees C) and provides less "bird-nesting" on push-type MIG welders. Applications include diesel engine bases, truck frames, cargo tanks and gun mount bases. Light Grey color coding on label. Required Shielding Gas: Argon. Recommended Polarity: DCEP Reverse. Tensile Strength (PSI): 63,000.
ROD WELDING LOW H 1/8INCH 5LB WIRE MIG 0.035 MILD STL       WIRE MIG 0.03 MILD STL
E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). A self-shielded mild steel all position flux cored MIG welding wire. Suited to single pass applications with high travel speed. Moderate to low spatter. Although no gas is required, an Argon/CO2 mix will reduce spatter. Excellent on thin gauge mild steel. Pink color coding on label. Required Shielding Gas: None. Recommended Polarity: DCEN Straight. Tensile Strength (PSI): 79,000. E71T-GS flux core MIG (GMAW) welding wire for mild steel. Best suited to single pass applications with high travel speed. Moderate to low spatter. Although no gas is required, an Argon/CO2 mix will reduce spatter. Excellent on thin gauge mild steel. Pink color coding on label. Required Shielding Gas: None. Recommended Polarity: DCEN Straight. Tensile Strength (PSI): 79,000. Wt 2 lb.
ROD WELDING DC ALUM 1/8IN .5LB ROD/ELCTRD WELDING 5/32IN 10LB DRILL ELECTRIC VSR 3/8 INCH
E4043 DC aluminum "AluminArc" specialty welding electrodes are the highest strength alloy for arc and torch welding of low alloy aluminum. Excellent for cast, wrought and extruded aluminum in all positions. Can also be used as a torch brazing alloy. Typical applications include truck beds, loading ramps and docks, banisters, stairs, diamond plate, irrigation piping, engine blocks, transmission housings and railroad frogs. Recommended Polarity: DC Reverse. Weight Lbs. (Kg): .5 (.22). Amperage: 70-120. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. 3/8" (10mm) keyless chuck. Powerful 4.2 amp motor. Variable speed (0-3,000 rpm). Lock-On button; built-in belt clip.
ROD WELD MILD STL 5/32IN 10LBS WELDING ROD 1/8IN 7014 10LB   ROD WELDING MILDSTL 10LB 1/8IN
General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. "High Deposition" is an iron powder-type electrode with medium to shallow penetration. It is known for smooth arc characteristics, good arc stability and low spatter. Excellent for sheet metal and ornmental iron work on poorly fitted joints. Use anywhere ease of operation and good appearance are required. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000; Amperage: 110-140. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
RD WLDG 1/8IN MILD STL 10LB   ELCTRODE F/SM WLDRS 10LB 1/8IN RD WLDG 1/8IN MILD STL 10LB
E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160.
ROD WELD 7018 MILD 5/32IN 10LB ELECTRODE STNLSS STL 1LB 1/8IN ROD WELDING LOW H 5/32IN 10LB
E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. Stainless steel Easy-All 312-16. Weld construction and pre-hardened tool steels and specialized iron-base castings w/high-carbon content. Mineral coated high-alloy steel that can be used by anyone - regardless of experience. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz).
ROD WELDING STEEL 1/8INCH 10LB Skil 6238-02 Corded Drill Black & Decker DR260B Compact Corded Drill
E6010 an all-purpose electrode used in all positions; a deep penetrating rod for carbon and galvanized steel; E6010 is for use with a DC welder and runs on DCEP; ideal for welding through light to medium amounts of dirt, rust or paint. Recommended Polarity: DCEP (Reverse Polarity). Tensile Strength (PSI): 80,000. Amperage: 35-125. Drills through mild steel, hardwood and softwood. Features mid-grip design for balance and control, keyless chuck for fast and easy bit changes, two-finger variable speed trigger for control between low to high speeds. Specs: 6 ft. cord length, max. hole diameter in: hardwood- 3/8"; softwood- 3/4", 120V-50-60Hz, 2,600 no load speed, and weighs 3.2 lbs. Includes carrying bag. Features variable speed reversing for controlled drilling and driving, bubble level, on-board bit storage. Specs: 0-1,500 rpm, capacity in: steel- 3/8", wood- 1". Includes one double ended screwdriving bit and storage bag..
DRILL HAMMER 1/2 INCH         DRILL 3/8 INCH VSR 4.5 AMP    WIRE MIG 0.35 MILD STL
Powerful 6.0 amp motor, variable speed (0-3300 rpm). Hammer: 0-43,500 BPM. Lock-On button for extended use. Die-cast aluminum gear housing. 360? assist handle. Includes: depth rod, auxiliary handle and chuck key. 3/8" VSR drill with powerful 4.5 amp motor. VSR switch for drilling, driving screws, sanding and many other applications. 0 - 3,000 rpm. Maximum drilling capacity 3/8" in steel; 3/4" in wood. Large trigger with infinite speed control. 3/8" keyless chuck for convenience when changing bits. 10' cord to allow most uses without an extension cord. Weighs 3.96 lbs. ER 70S-6 mild steel. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Yellow color coding on label. Required shielding gas: Argon/CO2. Recommended Polarity: DCEP Reverse Polarity. Tensile Strength (PSI): 70,000. Wt. 10 lb.
Black & Decker BDEDMT Lightweight Compact Corded Drill WIRE MIG 0.3 MILD STL         Skil 6277-02 Corded Drill
Quick connect system allows for tool free change of a variety of tool attachments. Powerful 4.0 amp motor provides enough power for a full range of applications and attachments. Compact and lightweight design allows user to carry out drilling/driving tasks in confined spaces and with ease. 11 position clutch provides extra level of control to prevent stripping and overdriving screws. ER 70S-6 mild steel. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Yellow color coding on label. Required shielding gas: Argon/CO2. Recommended Polarity: DCEP Reverse Polarity. Tensile Strength (PSI): 70,000. Wt. 10 lb. Features variable speed trigger for control of drilling speed, keyless chuck for fast and easy bit changes, built-in level for precise horizontal and vertical drilling, lock-on button for extended drilling and soft grip handle. Specs: 0-2,000 rpm no load speed, 120v. cut capacity in: soft wood-3/4", hardwood-3/8", 6' cord and weighs 3.5 lbs. Includes bit index, double-ended driver bit and carrying bag.
WIRE WELD SS MIG .030 IN 2LB  Black & Decker DR560 Compact Corded Drill Skil 6445-01 Corded Hammer Drill
Consists of 20% chromium and 10% nickel. Welds type 301, 302, 304, 308, 321 and 347 stainless steel. Applications include the food and beverage industry, maintenance and repair. Blue color coding on label. Required Shielding Gas: Argon or Argon/CO2. Recommended Polarity: DCEP Reverse. Tensile Strength (PSI): 79,000. For drilling holes through and driving large fasteners in wood, metal and plastic. Features variable speed reversing, all metal gear housing, reversing brush system and 360 degree side handle. Specs: 0-900 rpm, capacity in: steel- 1/2", wood- 1-1/2". Includes side handle, chuck key and holder. Variable speed trigger lets user control drilling speed, two finger trigger for increased control. Accepts large diameter bits designed for woodworking and cutting, side-assist handle for controlled, accurate drilling, horizontal bubble level for precise drilling and driving. Specs: no load BPM is 51,000, no load RPM is 3,000, 120V/50 -60 Hz. Includes hammer drill, chuck key side and assist handle.
Hitachi D10VH Lightweight Corded Drill Rockwell RC3136 Corded Hammer Drill Porter-Cable PC600D Corded Drill
Features variable speed reversing dial located in switch, lightweight, compact, maximum torque of 108.1 in-lbs, form fit palm grip with minimal vibration. Specs:  0-2,500 rpm no load speed, 108.1 in-lbs maximum torque, cut capacity in: wood 1", steel 3/8" and weighs 3.1 lbs. Features hammer function for drilling concrete and brick, magnesium gear housing for strength and prolonged life, keyed chuck secures the bit for heavy-duty use and soft grip handle. Specs: 120V/60Hz, 0-2800RPM no-load speed, 0-44800BPM impact rate, max drilling capacity in: wood- 1-1/4", masonry- 1/2", steel- 1/2" and weighs 5 lbs. Includes: 10 ft. cord, auxiliary handle, depth gauge and chuck key. Belt clip holds drill securely while working. Lock-on button provides easier control during prolonged use. Soft grip handle improves user comfort and control. Specs: 0-2,500 rpm no load speed, 6 ft power cord, variable-speed trigger, anti-slip comfort grip and weighs 3.2 lbs.
DRILL ROTARY HAMMER 1/2IN 7A  Bosch 1006VSR Corded Drill WIRE WELD MIG FLUX .035IN 11LB
7.0 amp motor delivers the power and durability to complete the toughest drilling applications. 0-3100 rpm. Cast metal gear housing helps dissipate heat from internal components for additional durability. Hammer drill and drill modes provide versatility for drilling into metal, wood, concrete, brick, block and other masonry materials. Two finger locking trigger provides ease of use during extended use. Beats/Min: 52700 bpm. Side handle provides more control in heavy applications and bind up situations. Includes (1) side handle, (1) depth rod, (1) chuck and key holder. Weighs only 4.5 lbs. Features variable speed reversing with ratcheting keyless chuck for minimal slipping, lock-on switch recessed in handle to prevent accidental lock-on, soft grip handle, oversized 2-finger trigger, service minder brushes, and sturdy belt clip. Specs: 8 ft. cord length, 0-2,600 no load rpm, 120V ac rating and weighs 3.4 lbs. A self-shielded mild steel all position flux cored MIG welding wire. Suited to single pass applications with high travel speed. Moderate to low spatter. Although no gas is required, an Argon/CO2 mix will reduce spatter. Excellent on thin gauge mild steel. Pink color coding on label. Required Shielding Gas: None. Recommended Polarity: DCEN Straight. Tensile Strength (PSI): 79,000.
Black & Decker DR670 Corded Hammer Drill Dewalt D21002 Corded Drill WIRE MIG MILD STL E71T-GS
Variable speed/reversing switch, soft grip handle, reversing brush system and mid-handle design for balance and comfort, ROC hammer technology for high speed masonry drilling, hammer drill or drill mode for masonry, wood or steel drilling, two speed selector, metal gear housing, 360-degree side handle with depth rod. Specs: 0-1,000 and 0-3,000 RPM, 51,000 BPM, cutting capacity: steel- 1/2", 1-1/4 "- wood, 1/2" -concrete.  Includes:  (1) chuck key & holder, side handle, depth rod, kit box. Powerful 7.0 amp motor gives the user the power to get the job done. Compact design allows for user comfort. Lightweight design decreases user fatigue. Variable speed trigger switch gives you greater versatility. Lock-on switch reduces fatigue. No load speed: 0-2,800 rpm. Maximum watts out: 440. Tool weighs only 3.55 lbs. Capacity in wood (spade bit): 1". Capacity in wood (hole saw): 1-1/8". Capacity in steel (twist bit) 3/8". Includes chuck key. A self-shielded mild steel all position flux cored MIG welding wire. Suited to single pass applications with high travel speed. Moderate to low spatter. Although no gas is required, an Argon/CO2 mix will reduce spatter. Excellent on thin gauge mild steel. Pink color coding on label. Required Shielding Gas: None. Recommended Polarity: DCEN Straight. Tensile Strength (PSI): 79,000.
Dewalt DWD112 Corded Drill Porter-Cable PC700D Corded Drill Milwaukee 0240-20 Right Angle Corded Drill
Variable speed reversing trigger for versatility in drilling and fastening applications with a soft grip handle and all ball-bearing construction that delivers high performance in heavy-duty applications. All metal ratcheting keyless chuck for greater bit retention. Specs: 650w max watts out, capacity in: wood (spade bit) 1", wood (hole saw) 1-1/8" and steel (twist bit) 3/8", single gear reduction, pistol grip handle, anti-slip grip and weighs 4.1lbs. Triple gear reduction provides torque for demanding drilling applications. Soft grip mid handle provides balance and control. Specs: 0-800 rpm, drilling capacity in: steel- 1/2", wood- 1-1/12", 6 ft power cord, variable speed trigger, anti-slip comfort grip, and weighs 4.8 lbs. Includes cast metal side handle, chuck key and holder. Variable speed trigger for fast drilling in wood and metal. All metal gear case provides superior gear support in high torque applications. Soft grip handle and two finger trigger. Specs: Voltage 120 AC only, 0-2800 rpm no load speed, keyless metal chuck, 2-wire 8' cord and weighs 4.25 lbs.
Prograde Pro Corded Hammer Drill Hitachi FDV16VB2 Corded Hammer Drill Dewalt DWE5010 Hammer Drills
Compact and lightweight hammer drill with variable speed control dial, push button reverse switch, one-piece cylindrical housing and aluminum die-cast inner cover and gear cover, oversize trigger switch, elastomer, non-slip grip, removable side handle, 1-1/16" center height that allows better reach into narrow work spaces. Specs: rated power input-590W,0.80HP,  rated power output-310W, 0.42HP, max.power output- 650W, 0.88HP, no load speed 0-2,900/min, no load impact rate 0-46,400/BPM, 111.6in/lbs max. torque, capacity in: concrete-5/8", wood-1", steel 1/2", 10-19/32" long, weighs 3.7lbs. Includes: side handle, depth gauge, injection molded plastic case. Variable speed control dial located on trigger, push button reversing switch, impact to drilling switch, low noise cooling air-flow design, removable side handle, Ball and needle bearing construction for longer tool life, industrial grade keyed chuck, provides greater bit retention, elastomer, non-slip grip. Specs: straight shank, keyed 3-jaw chuck, impact rate is 0-46,400BPM, no load speed is 0-2900RPM, capacity in: concrete-5/8", wood-1", steel-1/2", 2 modes of operation, switch is EVS, reversible, 11-11/32 long, weighs 3.5lbs. Includes: side handle, depth gauge, chuck key, injection molded plastic case. Single speed hammer drill. 7.0 amp motor provides high performance and overload protection. Dual mode: hammer drill/drill for wood, steel or masonry applications. Lightweight design for extended use and less user fatigue weighs only 4.3 lbs. Two-finger, rubber trigger for user comfort. 360 degree side handle with depth rod offers greater control, versatility and increased depth accuracy. Variable speed allows for precise hole placement on work surface. Compact design (10.3" length) allows for comfortable use and easy access to tight spaces. Lock-on trigger gives the option to keep the drill running continuously when doing repetitive applications.
Makita 6408K Corded Drill Hitachi D13VF Corded Drill Porter-Cable PC70THD Corded Hammer Drill Kit
Features variable speed /reversing for drilling in a wide variety of materials, low decibel rating (79dB). in-line handle, large recessed lock-on button, all-ball bearing construction and large trigger switch. Specs: 0-2,500 rpm no load speed, capacity in: steel- 3/8", wood- 1" and weighs 3.1 lbs. Includes keyless chuck and plastic tool case. Features variable speed control trigger, cast aluminum gear housing, double gear reduction, oversized reversible switch and trigger lock, removable side handle, and belt hook. Designed to fit in hand for improved control with minimal vibration. Specs: 0 to 850 rpm no-load speed, 416 in-lbs max torque, drilling capacity in: wood- 2-9/16", steel- 1/2", hole saw- 4-1/2" and weighs 4.6lbs. Includes chuck key, side handle, handle joint, injection molded carrying case. Dual speed transmissions provides maximum torque in setting one and maximum speed in setting two. Hammer drill and drill modes provides versatility for drilling into metal, wood, concrete, brick, block and many other materials. Cast metal gear housing helps dissipate heat from internal components for additional durability. Includes cast metal side handle, depth rod, chuck key and holder. Specs: 0-1,100 & 0-3,100 rpm, 52,700 bpm, 1/2" capacity in steel, 1-1/4" capacity in wood, 1/2" capacity in concrete, 6' power cord, variable-speed trigger, anti-slip comfort grip and 5.1 lbs weight.
Dewalt DW235G Corded Drill ELECTRODE STEEL 40LB 1/8IN    ELECTRODE STEEL 40LB 5/32IN
ELECTRODE STEEL 40LB 1/8IN
Our Price: $103.07
Variable speed and reversing switch, metal gear housing for jobsite durability, made of helical cut steel, heat treated gears, two finger trigger for increased comfort.  Specs: 0-850 rpm no-load speed, 600 watts maximum output power, 360 degree side handle, double gear reduction. Includes: chuck key with holder. General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110.
ELECTRODE STEEL 40LB 1/8IN    ELECTRODE STEEL 40LB 5/32IN   ELECTRODE STEEL 40LB 1/8IN
ELECTRODE STEEL 40LB 1/8IN
Our Price: $103.07
ELECTRODE STEEL 40LB 1/8IN
Our Price: $103.07
Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Diameter (Inches): 5/32" Weight Lbs. (Kg): 5 (2.26) Tensile Strength (PSI): 84,000 Amperage: 140-190 Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Diameter (Inches): 5/32" Weight Lbs. (Kg): 5 (2.26) Tensile Strength (PSI): 84,000 Amperage: 140-190 E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilities welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). 1/8" Diameter,  22.7 Kg, 88,000 PSI tensile strength, 35-125 amperage.
Makita HP1641K Industrial Corded Hammer Drill Kit Milwaukee 5376-20 Corded Hammer Drill Dewalt DW511 Corded Hammer Drill
Lightweight, all ball bearing construction for longer tool life with two modes of operation, hammering with rotation and rotation only, ergonomic handle with rubberized soft grip, extended service life of carbon brushes, recessed lock on button for continuous use. Specs: capacities in: concrete-5/8", steel 1/2", wood-1-3/16", no load RPM 0-2,800, BPM 0-44,800, 11-7/8" long, weighs 4.3lbs. Includes: side handle, depth gauge, keyless drill chuck, plastic case. Equipped with a removable 360 degree side handle that also assists in setting the depth rod for pre-set hole drilling. Metal gear housing. 2-mode operation, hammer drill and drill only modes for concrete, wood, and metal. Over-mold increases grip and reduces user felt vibration. Specs: 0-2,800 no load rpm, 0-48,000 no load bpm, 1-1/4" wood capacity-hole saw, 1/2" metal capacity-twist bit, 5/8" concrete capacity, 8 ft fixed cord type, trigger lock, and weighs 4.9 lbs. Lightweight for extended use with variable speed, dual mode hammerdrill/drill for wood, steel or masonry applications, 360 degree side handle with depth rod, two-finger, rubber trigger. Specs: max watts out 650W, no load speed 0-2,700RPM, blows/Min 0-46,000BPM, capacity in: steel 1/2", wood 1-1/4", concrete optimum 5/32-3/8", 11-1/2" long, weighs 4.3lbs. Includes: side handle, depth rod, chuck key with holder.
DRILL HAMMER 2/SPD 8.5A 1/2IN Magnum 0299-20 Corded Drill Magnum 0300-20 Corded Drill
Features a muscular 8.5 amp motor that handles all masonry drilling applications, delivering a max of 51,000 BPM for muscles and durability. The tool's drilling capacities range from 3/4" for masonry applications to 1-1/2" for wood. The HG 18-2 features a torque control auxiliary handle, which locks into place; the handle has a built-in depth gauge. The dual mode selector easily converts from rotation only to hammer drill mode. A rotating brush plate allows users to easily back out bound-up bits. It has two speed settings, one for high speed and one for high torque. Because of its heavy duty three jaw 1/2" chuck, the tool has a high clamping force that prevents drill bits from slipping. This robust drill has a metal front housing for longer life, a pistol grip handle with soft-grip design and an integral slip clutch for security against recoil. Includes (1) 360? auxiliary handle and (1) depth gauge. Features an all metal gear case and diaphragm, heavy-duty chuck, 360-degree locking side handle, ergonomic textured grip and two finger trigger for user comfort and balance. Specs: 120V AC, 0-850 rpm no load speed, drilling capacity in: wood (auger bit)- 1-1/2", wood (self-feed bit)- 2-9/16", metal (hole saw)- 2", 1/2in-20 spindle, double gear train, 8 ft. fixed 3-wire rubber cord and weighs 5.4 lb. Includes side handle and chuck key with holder. Features an all metal gear case and diaphragm, heavy-duty chuck, 360-degree locking side handle, ergonomic textured grip and two finger trigger for user comfort and balance. Specs: 120V AC, 0-850 rpm no load speed, drilling capacity in: wood (auger bit)- 1-1/2", wood (self-feed bit)- 2-9/16", metal (hole saw)- 2", 1/2in-20 spindle, double gear train, 8 ft. fixed 3-wire rubber cord, soft grip handle and weighs 5.4 lb. Includes side handle and chuck key with holder.
Dewalt DWD210G Corded Drill Magnum 0201-20 Right Angle Corded Drill Milwaukee 0370-20 Right Angle Close Quarter Corded Drill
Features a variable speed reversing switch, motor generates 50 percent more power with increased overload protection for added durability, soft grip handle and two-finger trigger, 360 degree locking side handle for greater control and versatility, metal gear housing for jobsite durability and increased reliability. Specs: 980W max watts out, drill capacity in: wood (spade bit) 1-1/2", wood (hole saw) 3-5/8", steel (twist bit) 1/2", wood (self-feed) 2-9/16", wood (auger bit) 1-1/2", steel (hole saw) 2", double gear reduction, handle style pistol grip design, anti-slip grip and weighs 4.9lbs. Includes 360 degree locking side handle with soft grip and chuck key with holder. All metal gear case and diaphragm. 360-degree locking side handle. All metal Grip-Lok, 2-sleeve keyless metal chuck. Ergonomic tactile soft grip and 2-finger trigger. Specs: 0-2500 rpm no load speed, capacity in: wood (flat boring bit) 1-1/2", wood (hole saw) 2-1/4", metal (twist bit) 1/2", 3/8in.-24 spindle, double gear train, 10' fixed 2-wire rubber cord, double insulated and weighs 4.1 lbs. Includes side handle. Provides a unique chuck angle for reaching into tight areas. Large paddle trigger, textured grip with convenient forward/reverse lever. Angled cord exit keeps cord out of work area. Specs: 120 volts AC, 0-1,300rpm, 1/2in.-20 spindle, 3/8" metal twist bit capacity, double insulated construction, double gear train, 8 ft. fixed cord and weighs 3.9 lbs. Includes chuck key with holder.
Dewalt DW505 Corded Hammer Drill Milwaukee 5378-21 Corded Hammer Drill Kit Milwaukee 5378-20 Corded Hammer Drill
High/low gear for high speed drilling, or high toque applications. Dual mode for hammerdrill/drill used  in wood, steel or masonry applications. Features two finger, rubber trigger. Specs: 6500W max watts out, 0-1,200/0-2,700rpm no load speed, 0-19,000/0-46,000bpm, capacity in: optimum- 5/32- 3/8", steel- 1-1/2", wood- 1/2" and weighs 4.8lbs. Includes 360-degree locking side handle, steel depth rod, chuck key with holder and kit box. Features variable speed, reversing, two mode selection for hammer with rotation or rotation only, synchronized gear shift, ergonomic soft grip handle, two finger trigger switch, self stop brush system. Specs: 120 AC, 0-1,350/0-2,500rpm no load, 0-20,000/0-40,000 bpm, capacities in: wood- 3-3/4", metal-twist bit- 1/2", concrete- 3/4", self-feed bit- 1-3/4", 10 ft. fixed cord, trigger lock and weighs 6.0 lbs. Includes side handle, depth gauge, chuck key and impact resistant carrying case. Features variable speed, reversing with dual range speed control, hammer with rotation or rotation only, removable side handle and self-stop brush system. Specs: 120 AC, 0-1,350/0-2,500rpm no load, 0-20,000/0-40,000 bpm  no load, capacities in: concrete- 3/4", metal/twist bit- 1/2", wood- 3-3/4", self-feed bit capacity- 1-3/4", 10ft. fixed cord, trigger lock and weighs 6.0lbs. Includes side handle, depth gauge and chuck key.
Makita HP2050F Corded Hammer Drill Dewalt DW245 Corded Drill Dewalt DWD215G Corded Drill
Drill has variable speed, reversing, built in LED light illuminates drilling edge and increases visibility with a bulb that never needs replacing, two modes, hammering with rotation and rotation only, positive stop mode selector prevents accidental mode disengagement, built in torque limiter, large trigger switch and 360 degree swivel side handle, recessed lock-on button, ball bearing construction, ergonomic shape with rubberized grip, air vent holes supply required ventilation. Specs: capacities in: concrete-3/4", steel (low) 1/2" (high) 5/16", wood-1-9/16", no load RPM (low) 0-1,200 (high) 0-2,900, BPM (low) 0-24,000 (high) 0-58,000, 14-1/4' long, weighs 5.6lbs. Includes: side handle, depth gauge, chuck key, tool case. Drill has variable speed reversing and is made from helical-cut steel with heat-treated steel gears for long life and durability, metal gear housing for jobsite durability and increased reliability, two-finger, rubber trigger for increased comfort, triple gear reduction, 360 degree side handle. Specs: 0-600rpm no load speed, max watts out 600W, capacity in wood (spade bit) 1-1/2", (hole saw) 4", (self-feed) 2-9/16", (auger bit) 1-1/2", capacity in steel (twist bit) 1/2", (hole saw) 2-3/4", triple gear reduction, handle style pistol grip, weighs 4.4lbs. Includes: 360 degree side handle, chuck key with holder Features variable speed reversing switch for increased versatility, 1/2" all metal single sleeve ratcheting keyless chuck with automatic spindle lock, soft mid handle grip. Specs: 0-1,200 rpm no load speed, 980 W max watts out, drilling capacity in: wood: (spade bit)- 1-1/2", (hole saw)- 3-5/8", (self-feed)- 2-9/16", (auger bit)- 1-1/2", steel: (twist bit)- 1/2", (hole saw)- 2", double gear reduction, anti-slip grip and weighs 5.2 lbs. Includes 360 degree locking side handle with soft grip.
Magnum 0234-6 Corded Drill Dewalt DWD520K Corded Hammer Drill Kit Makita DP4000 Lightweight Corded Drill
Features trigger speed control, reversing, a Quik-Lok cord that can be removed from drill for storage or service replacement, brush cartridge system with a set of spare brushes.  Specs: 120v AC, 0-950rpm no load speed, capacity in: wood (auger bit) 1-1/2", (self feed bit)  2", metal (hole saw)  2", 1/2 in.-20 spindle, double gear train, 8ft cord, grounded, trigger lock and weighs 4.8 lbs. Includes side handle, chuck key with holder. Generates 50 percent more power with increased overload protection for added durability. Dual mode for versatility in masonry, wood, or steel drilling applications. Features two speed range, high speed or high torque, soft grip handle, two finger trigger and metal gear housing. Specs: 980W max watt out, 0-1,200/0-3,500rpm no load speed, 0-56,000bpm, capacity in: steel- 1/2", wood- 1-1/2", concrete optimum 5/32-7/16", 14" long and weighs 6.0lbs. Includes 360 locking side handle, steel depth rod, chuck key with holder and kit box. Reversible, variable speed. Retractable belt clip, ergonomic rubberized grips, large trigger switch, comfortable side handle rotates 360 degrees, all ball and needle bearing construction, brushes are easily accessible, double insulated. Specs: capacity in:  steel 1/2", wood 1-1/2"; 0-900 RPM no load speed, weighs 4.8 lbs. Includes: chuck key, side handle.
Makita DS4011 Corded Drill Makita HR2475 Corded Rotary Hammer Drill Bosch HD21-2 Duel Corded Hammer Drill
Powerful motor engineered for improved drilling and mixing performance; provides increased speed and torque for drilling large holes, balanced for reduced operator fatigue. D-handle rotates 360 degrees with 24 positive stops for multi position operation. Specs: AMPS (120V), capacities in wood: (auger bit 1-7/16"), (self feed-2-9/16"), (hole saw-5"), in steel: (twist bit) 1/2", (hole saw) 3", no load speed 600 RPM, overall length  13-3/8", weighs 6.3 lbs. Includes: (1) 1/2" spade handle drill, (1) drill chuck, (1) chuck key, (1) side handle and On-board chuck key storage for fast and convenient bit changes. Variable speed with 3-Mode operation rotation only, hammering with rotation and hammering only, ergonomic D-shaped handle with rubberized soft grip, accepts SDS-PLUS bits, one touch sliding chuck, built-in torque limiter, 'No hammering when idling' function, extended service life of carbon brushes, recessed lock on button, 40 different bit angle settings. Specs: 7AMP, impact energy is 2.7 ft./lbs., no load BPM is 0-4,500, no load RPM is 0-1,100, capacity in: concrete 1", steel-1/2", wood-1-1/4", 16-7/8" long, weighs 6.6lbs. Includes: (1) rotary hammer, (1) 360 degree auxiliary handle, (1) depth gauge, (1) carrying case. Includes: (1) rotary hammer, (1) auxiliary handle, (1) depth gauge, (1) plastic tool case. Dual-mode selector converts from rotation only to hammer drill mode. Ergonomic pistol-grip handle. Integral slip clutch helps minimize torque reaction. Features rotating brush plate, metal gear housing and 2 speeds. Specs: 3-jaw chuck, max hole in: concrete- 7/8", wood- 1-5/8", metal- 5/8", 0-900/0-3000 no load rpm, 0-18000/0-54000 no load bpm, 13.5" long and weighs 10.9 lbs. Includes 360-degree auxiliary handle, depth gauge and carrying case.
Milwaukee 5262-21 Corded Rotary Hammer Kit DRILL HAMMER SDS1IN PISTOL GRP DRILL HAMMER 1IN SDS ROTARY
Features a lightweight design to provide ease of use and reduce user fatigue. Mechanical clutch protects tool when bit binds up. 3-mode operation: rotary hammer, hammer only and rotation only. Variable position chisel stop allows steel to be adjusted for work in any orientation. Specs:1.8 ft-lbs impact energy, 0-1,500 no load rpm, 0-5625 no load bpm, 10 ft cord length, double insulated, D-handle style, 2-1/2" thin wall core bit capacity, and weighs 5.8 lbs. Pistol grip hammer drill. 2.6 Joules of impact energy for fast drilling and chipping speed. 8.0 amp high performance motor. Rotating brush ring delivers full speed/torque in forward and reverse. Integral clutch reduces sudden, high torque reactions if bit jams. No load speed: 0-1500 rpm. Variable speed switch. Tool length: 13.25"; Tool weight: 5.8 lbs. Kit includes 360 degree side handle, depth rod and kit box. 2.8 joules of impact energy for fast drilling and chipping speed. Shocks - active vibration control, reduced vibration felt in the handles. 8.0 amp high performance motor. Rotating brush ring delivers full speed/torque in forward and reverse. Integral clutch reduces sudden, high torque reactions if bit jams. Variable speed switch. No load speed 0-1500 rpm. Tool length: 16.75"; Tool weight: 6.6 lbs. Includes 360 degree side handle, depth rod and kit box.
Makita HP2070F Corded Hammer Drill Milwaukee 5387-22 Corded Hammer Drill Kit Bosch 11255VSR Bulldog Rotary Hammer Drills
Drill has variable speed, conveniently located reverse slide switch, built in LED light illuminates drilling edge and increases visibility with a bulb that never needs replacing, two modes, hammering with rotation and rotation only, positive stop mode selector prevents accidental mode disengagement, built in torque limiter, large trigger switch and 360 degree swivel side handle, recessed lock-on button, ball bearing construction, ergonomic shape with rubberized grip, air vent holes supply required ventilation. Specs: capacities in: concrete-3/4", steel (low) 5/8" (high) 5/16", wood (low)-1-9/16" (high) 1", no load RPM (low) 0-1,200 (high) 0-2,900, BPM (low) 0-24,000 (high) 0-58,000, 14-1/4' long, weighs 5.6lbs. Includes: side handle, depth gauge, chuck key, tool case. Motor provides overload protection. Metal gear case can withstand daily jobsite abuse. Lightweight balanced design reduces operator fatigue. Dual speed motor optimized for concrete fastening. Specs: 120 AC, 0-16,000/0-40,000 bpm no load, 0-1,000/0-2,500 rpm no load speed, capacity in: steel- 1/2", concrete- 3/4", 10 ft. Quik-Lok cord, and weighs 6.4 lbs. Includes side handle, depth gauge, chuck key and carrying case. HammerHook allows quick tool storage during the job. 0-1,300 rpm; 0-5,800 bpm. Multi-function selector provides 3 modes of operation: rotation only, rotary hammer and hammer-only mode. Vario-Lock positioning rotates and locks chisel into 36 different positions to optimize working angle. Rotating brush plate provides equal power in forward and reverse. Cord Turret 35" pivot for added flexibility and longer cord life. SDS-plus bit system tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. D-handle design is ideal for overhead and downward drilling applications. Variable speed reversing trigger for accurate bit starting as well as removing fasteners or bound bits. Integral clutch helps minimize torque reaction.
Dewalt DW130V Corded Drill Milwaukee 1660-6 Compact Corded Drill Makita HP2010N Corded Hammer Drill
Features variable speed reversing switch avoids air bubbles when mixing mud and offers greater control when drilling. Specs: 600 watts max power output, 0-550 rpm no-load speed, triple gear reduction, drilling capacity in: wood (spade bit) 1-1/2", wood (self-feed) 2-9/16", wood (hole saw) 5", wood (auger bit) 1-1/2", steel (twist bit) 1/2", steel (hole saw) 3" and weighs 7.5 lbs. Includes 3 position side handle, 2-position rear spade handle chuck key and holder. Extra long handles, two handed operation for large hole drilling or material mixing, 450 rpm operating speed, for large bits or any hi-torque application. Heat treated gears are helical-cut for quiet performance. Specs: voltage  120 AC , wood capacity: (auger bit) 1-1/2", (hole saw) 4", metal capacity (twist bit)  1/2", spindle  5/8 in.-16, triple gear train, 8 ft. fixed cord, grounded, weighs 11.4 lbs. Includes: pipe handle, chuck key, flexible key holder. Variable speed switch, 2-speed gear change, depth gauge, all ball and needle bearings for long tool life, adjustable side handle, double insulated. Specs: capacity in: concrete-(high) 1/2" (low)-3/4", steel-(high) 1/4"  (low)-1/2" , wood-(high)-3/4" (low)-1-1/2", no load RPM (high) 0-2,300 (low) 0-900, BPM (high) 0-46,000 (low) 0-18,000, 13-3/4" long, weighs 6.4lbs. Includes: drill chuck, chuck key, side handle, depth gauge, steel tool case.
Bosch RH328VC Corded Rotary Hammer Hitachi DH38YE2 Corded Rotary Hammer HAMMER ROTARY SDS 1-9/16IN
HAMMER ROTARY SDS 1-9/16IN
Our Price: $416.98
Variable speed 3 finger trigger, SDS-Plus tool-free bit changes, 3 modes of operation, rotation only, rotary hammer and hammer only mode, vario-lock positioning rotates and locks chisel into 36 different positions, padded rear handle, 360 degree auxiliary handle with built-in depth gauge, integral clutch, double insulated, UL listed, complies to OSHA. Specs: 120V, impact energy is  2.6 ft./lbs., optimal concrete capacity range: 1/4"-7/8",max. hole diameter in: concrete-1-1/8", concrete-thin wall core bit-3", steel-1/2", wood-1-1/4", no load BPM 0-3,900, no load RPM 0-850 ,  weighs 9.3lbs., 12' cord, 15-1/4" long. Includes: (1) rotary hammer, (1) auxiliary handle, (1) depth gauge, (1) carrying case Two modes of operation, hammer only and hammer drilling, low vibration levels, 18.8m/s2 (full load), low noise levels of only 95.2 dB (full load), safety clutch shuts down rotation in the event of a bound bit, dust proof cover, auto-stop carbon brushes, sealed grease system, soft elastomer handle, adjustable 360 degree side handle. Specs: full-load speed is 510RPM, full-load impact is 2,800BPM, solid bit capacity is 1-1/2", core bit capacity is 4-1/8", 16-11/32" long, weighs 14.1 lbs. Includes side handle, dust cover, depth stopper and case. Two modes of operation, hammer only and hammer drilling. Designed to take on a variety of tasks including drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods. Features large change lever, oversize trigger switch, soft over-molded handle, and 360 degree side handle. Specs: Vibration Level 16.5m/sec2, No Load Speed 620/RPM, Impact Rate 2,800/BPM, Impact Energy 6.3ft/lbs., Drill Bit Capacity: 1-9/16", Core Bit Capacity: 4-1/8", Weight: 15.6lbs. Includes: side handle, depth stopper rod, grease and carrying case.
Dewalt D25553K Combination Corded Rotary Hammer Kit Bosch 11264EVS Corded Rotary Hammer
Motor provides high performance and overload protection while impact energy provides fast drilling and powerful chipping, rear handle mount for increased user comfort in down drilling applications, factory set clutch reduces sudden, high torque reactions if bit jams, trigger lock on, rubber grip. Specs: 120V/AC, optimal concrete drilling-3/8-1-1/4", 8.0 ft-lbs of impact energy, no load speed 490 RPM, blows/min 3300 BPM, length 18.6", weight 13.5lbs. Includes: side handle, carrying case. Variable speed dial, vibration reduction in the hammer mechanism and the grip area provides maximum user comfort for extended periods of work, maintains speed under load and overload protection, delivers 20 percent more power in hammer only mode, rotates and locks chisel into 12 different positions, service light indicates when preventative maintenance is required, cord turret reduces cord wear. Specs: impact energy (ft. lbs.) 7.4 Ft. Lbs./8.1 (turbo), 18" long, max. hole dia. in: concrete-1-5/8", concrete-core bit-4-1/8", no load  BPM is 1,700-2,900, no load  RPM is 170-340, 120V, weighs, 15.1lbs. Includes: (1) 360 degree auxiliary side handle with depth stop, (1) carrying case.
   
 
1