Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > WELDING SUPPLIES > WELDING ELECTRODES
Sort By:
1
GLASSES SAFETY VISITORS CLEAR ROD WELDING 1LB 1/8IN MILD STL ROD WELDING AC/DC 3/32INCH 1LB
Features high impact scratch resistant polycarbonate lenses and non-slip temples. Provides 99.9% UV protection. Meets ANSI Z87.1+safety standards. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
ROD WELDING 1LB 3/32IN MILDSTL ROD WELDING LOW H 3/32IN 1LB  ROD WELDING LOW H 1/8INCH 1LB
E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz).
ROD WELDING AC/DC 1/8 INCH 1LB ROD/ELECTRD WELDING 3/32IN 1LB ROD/ELECTRD WELDING 1/8IN 1LB
E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160.
GLASSES SAFETY CLEAR/PINK     SHIELD FACE CLEAR REPL15.5X8IN GLASSES SAFETY BLUE MIRROR
Specifically designed to fit smaller, narrower faces. These include a deep temple design that provides good side impact protection. The clear lens is best used indoors or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Replacement clear grinding shield for "Forney" 58600 (sku # 891.0275) and 58605 grinding shield assemblies. Meets ANSI Z87.1 safety standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING. Sleek and compact; weighs less than one ounce; offers serious all-day comfort with a stylish look and extreme durability; independently certified; provides 99.9% UV protection; meets ANSI Z87.1+ safety standards.
GLOVE WELDING UNLND LEATHER LG FACE SHIELD GREEN UNIV8X15-1/2 Drill Doctor WSSA0002012 Replacement Abrasive Belt Kit
Split leather palm and back. 4" safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. "Forney" imprint on glove. 15-1/2" (393.7mm) x 8" (203.2mm) replacement green grinding shield for Forney 58604 and 58606 grinding shield assemblies. Meets ANSI Z87.1 Safety Standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING. For use with Work Sharp Knife & Tool Sharpener only, Orgill SKU# 775.2801. Includes two each: P80 coarse grit belts, P220 medium grit belt, and 6000 fine grit belts.
HEADGEAR REPL RCHT WELD HELMET Drill Doctor WSSA0002703C Replacement Abrasive Belt Kit Drill Doctor WSSA0002704C Replacement Abrasive Belt Kit
Replacement ratcheting-type headgear for "Fornery" 55666 (sku # 891.0069), 55673 (sku # 891.0077), 55697 ("Insta-Shade II") and old-style 55699 ("Insta-Shade III" - two control knobs on outside of helmet) welding helmets. Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with: (6) P80 Coarse grit belts for tool grinding and sharpening. Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with (6) P220 Medium grit belts.
Drill Doctor WSSA0002705C Replacement Abrasive Belt Kit ROD WELD GEN PURP 1LB 5/64IN  GOGGLES OXY/ACET NUM 5SHD 50MM
Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with (6) 6000 Fine grit belts. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. Features two separate 50mm round #5 shaded hardened eye-pieces. Equipped with cover lenses. Folds up to pocket size for storage and carrying. Meets ANSI Z87.1 safety standards. "Forney" 56900 (shaded) and 56901 (clear) replacement 50mm eye-pieces are available separately. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY.
GLASSES SAFETY CLR/BLK FLEX   GLASSES SAFETY CLR/PINK FLEX  GLASSES SAFETY CLR/BLK FLEX
Includes patented flex temple technology designed to relieve pressure on the ear while providing excellent stability and comfort. Additional features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. The clear lens is best used indoors or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Include patented temple technology designed to relieve pressure on the ear while providing excellent stability and comfort. Additional features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. These clear lenses are best used for indoor/outdoor use or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Include patented temple technology designed to relieve pressure on the ear while providing excellent stability and comfort. Additional features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. These clear lenses are best used for indoor/outdoor use or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
GLASSES SAFETY BLUEMIRROR/BLUE GLASSES SAFETY CLR/GRAY FRAME WLDG GLV LTHR HVYD L
Features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Split leather palm and back. Extended gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove. "Forney" imprint on glove.
GLOVE WELDING BLK MENS LARGE  GLOVE WELDING GREY X-LARGE    WLDG GOGGLES CYCLOPS UNIV
Split Leather palm and back. Extended Gauntlet safety cuff offers extra wrist and forearm protection. Fortified with heat resistant Kevlar thread for added durability and wear. Cotton fleece lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove. Forney?s emblem imprint on glove. Extended gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength. Forney imprint on glove. Featuring 2" (50.8mm) x 4-1/4" (107.95mm) #5 shade hardened lens with clear glass cover lens. Meets ANSI Z87.1 safety standards. Conforms comfortably to the head and allows ample room to fit over regular eye glasses. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY.
ELECTRODE STEEL 1LB 1/16IN    GLOVE WELD LEATHER LARGE BROWN GLOVE WELDING BROWN MEN XLRG
General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. Split leather palm and back. Extended gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove. "Forney" imprint on glove. Extended Gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove. Forney?s emblem imprint on glove.
GLASSES SAFETY GRAY/BLK FRAME GLASSES SAFETY BLUE MIRROR/BLK GLASSES SAFETY CLR/CAMO FRAME
Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards.
GLASSES SAFETY AMBER/CAMO FRM GLASSES SAFETY BRNZ/CAMO FRAME GLASSES/GOGGLE SAFETY CLEAR
Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards. Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards. Clear lens and anti-fog coating. Includes temple and head straps which allow an individual to swap between safety glasses and goggles. Soft foam lining around the frame which block out debris. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards.
ROD BRAZING BRZ FLUX 3/32X18IN CAP WELDING COTTON REV SIZE 7 CAP WELDING CTN REV SIZE 7-1/4
Formulated for high tensile strength and ductility. Smooth flowing. Excellent for most brazing uses. Flux coated for best cleaning action. Yellow color coded. Tensile Strength: 65,000 PSI. Melting Point: 1,598? F (870? C). Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available. Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.
CAP WELDING CTN REV SIZE 7-3/8 CAP WELDING CTN REV SIZE 7-1/2 CAP WELDING CTN REV SIZE 7-3/4
Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available. Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available. Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.
ROD AC LOW HYDROGEN 5/32IN 5LB ROD WELD MILD STL 5/32IN 5LBS ROD WELDING 5LB 1/8IN MILD STL
Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Diameter (Inches): 5/32" Weight Lbs. (Kg): 5 (2.26) Tensile Strength (PSI): 84,000 Amperage: 140-190 General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
ROD/ELECTRD WELDING 1/8IN 5LB GOGGLES WELDING FLIP 2X4-1/4IN ROD WELD 7018 MILD 5/32IN 5LB
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. Featuring 2" (50.8mm) x 4-1/4" (107.95mm) #5 shade hardened lens with clear glass cover lens. Meets ANSI Z87.1 safety standards. Conforms comfortably to the head and allows ample room to fit over regular eye glasses. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
ROD/ELECTRD WELDING 5LB 3/32IN ROD WELDING AC/DC 1/8 INCH 5LB ELECTRODE CAST IRON 1LB 1/8IN
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. Nomacast hard cast iron features a non-conductive coating; great for welding dirty, heat affected and oxidized cast iron; ideally suited to cladding contaminated casting prior to joining with high nickel alloys; non-machinable; RC 39 hardness.
ROD/ELECTRD WELDING 5/32IN 5LB GLOVES WELDING HD BLUE MENS LR GLOVES WELDING HD BLUE MENS XL
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. Premium side-split leather palm and back. Heat and abrasion resistant reinforced patches in key strategic areas for added protection. Extended Gauntlet safety cuff offers extra wrist and forearm protection. Fortified with heat resistant Kevlar thread for added durability and wear. Cotton foam lining for moisture absorption and heat protection. Self-hemmed welting in seams to provide extra strength to seams adding durability and strength. Forney?s emblem imprint on glove. Premium side-split leather palm and back. Heat and abrasion resistant reinforced patches in key strategic areas for added protection. Extended Gauntlet safety cuff offers extra wrist and forearm protection. Fortified with heat resistant Kevlar thread for added durability and wear. Cotton foam lining for moisture absorption and heat protection. Self-hemmed welting in seams to provide extra strength to seams adding durability and strength. Forney?s emblem imprint on glove.
ROD WELDING MILDSTL 5LB 3/32IN ELCTRD F/AC WLDR 5LB          ELCTRODE 3/32IN 5LB F/SM WLDRS
E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
ROD WELDING LOW H 1/8INCH 5LB SHIELD FACE CLEAR LIGHTWEIGHT Darex/Drill Doctor DA313020GF Drill Replacement Parts
E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). Complete assembly with pin-type headgear and 15-1/2" (393.7mm) x 8" (203.2mm) clear grinding shield. Lightweight design for maximum comfort. Tough non-warping red polyethylene visor. Meets ANSI Z87.1 safety standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING. "Forney" 58602 (sku # 891.0283) is replacement clear shield. Replaces sharpening wheel of 3/32" to 1/2" drill bits for Drill Doctor. Fits all GenX model drill bit sharpeners. 3 layers of nickel/diamond plating to provide long life; lasts for 200 or more sharpenings.
FACE SHIELD CLEAR GRINDING    HLMT WLDG FLIP FRONT 2X4-1/4IN ROD WELDING DC ALUM 1/8IN .5LB
Complete assembly with ratcheting-type headgear and 15-1/2" (393.7mm) x 8" (203.2mm) grinding shield. Lightweight design for maximum comfort. Tough non-warping polyethylene visor. Meets ANSI Z87.1 Safety Standards. Forney 58608 is replacement ratcheting-type headgear. Forney 58602 is replacement clear shield. NOT TO BE USED FOR OXY-ACETYLENE WELDING. Includes ratcheting-type headgear, lift front 2" (50.8mm) x 4-1/4" (107.95mm) heat treated #10 shade lens and clear glass protective lens. Lightweight, tough and durable; UV/IR protection. Meets ANSI Z87.1 safety standards. "Forney" 55674 (sku # 891.0085) is replacement ratcheting-type headgear. E4043 DC aluminum "AluminArc" specialty welding electrodes are the highest strength alloy for arc and torch welding of low alloy aluminum. Excellent for cast, wrought and extruded aluminum in all positions. Can also be used as a torch brazing alloy. Typical applications include truck beds, loading ramps and docks, banisters, stairs, diamond plate, irrigation piping, engine blocks, transmission housings and railroad frogs. Recommended Polarity: DC Reverse. Weight Lbs. (Kg): .5 (.22). Amperage: 70-120.
ROD/ELCTRD WELDING 5/32IN 10LB WLDG HLMT BLK BANDIT          ROD WELD MILD STL 5/32IN 10LBS
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. Includes ratcheting-type headgear, 5-1/4" (133.35mm) x 4-1/2" (114.3mm) heat treated #10 shade lens and clear glass protective lens. Lightweight, tough and durable; UV/IR protection. Meets ANSI Z87.1 safety standards.  "Forney" 55674 (sku # 891.0085) is replacement ratcheting-type headgear. General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110.
WELDING ROD 1/8IN 7014 10LB   ROD WELDING MILDSTL 10LB 1/8IN RD WLDG 1/8IN MILD STL 10LB
"High Deposition" is an iron powder-type electrode with medium to shallow penetration. It is known for smooth arc characteristics, good arc stability and low spatter. Excellent for sheet metal and ornmental iron work on poorly fitted joints. Use anywhere ease of operation and good appearance are required. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000; Amperage: 110-140. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz).
ELCTRODE F/SM WLDRS 10LB 1/8IN RD WLDG 1/8IN MILD STL 10LB   ROD WELD 7018 MILD 5/32IN 10LB
E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
ELECTRODE STNLSS STL 1LB 1/8IN ROD WELDING LOW H 5/32IN 10LB ROD WELDING STEEL 1/8INCH 10LB
Stainless steel Easy-All 312-16. Weld construction and pre-hardened tool steels and specialized iron-base castings w/high-carbon content. Mineral coated high-alloy steel that can be used by anyone - regardless of experience. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E6010 an all-purpose electrode used in all positions; a deep penetrating rod for carbon and galvanized steel; E6010 is for use with a DC welder and runs on DCEP; ideal for welding through light to medium amounts of dirt, rust or paint. Recommended Polarity: DCEP (Reverse Polarity). Tensile Strength (PSI): 80,000. Amperage: 35-125.
GLOVES WELDING MENS X-LARGE   GLOVE WELDING MENS LEATHER LRG Drill Doctor DD350X Drill Bit Sharpener
Full grain palm and back. Heat and abrasion resistant reinforced patches in key strategic areas for added protection. 5" split leather reinforced safety cuff offers extra wrist and forearm protection. Fortified with heat resistant Kevlar thread for added durability and wear. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove.  Forney?s emblem imprint on glove. Premium grade full grain palm and back; heat and abrasion resistant reinforced patches in key strategic areas for added protection; 5" split leather reinforced safety cuff offers extra wrist and forearm protection; fortified with heat resistant Kevlar thread for added durability and wear; self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove; "Forney" embossed on glove. Sharpens HSS, Carbide, Cobalt tin coated and Masonry bits. Sharpens bits in less than 30 seconds. Easily replaceable diamond grinding wheel sharpens 118 degree point angle size 3/32" to 1/2". On chuck alignment for simplified sharpening process.
KNIFE-SHARPENER COMBO         GRINDER BENCH 6IN W/LIGHT     Rockwell RK7867 Bench Grinder
KNIFE-SHARPENER COMBO
Our Price: $55.19
Work Sharp Combo Knife Sharpener is a complete benchtop solution for sharpening outdoor knives, pocket knives, kitchen knives, serrated knives and more. It is designed to be a fast and easy sharpener. It combines power sharpening technology (flexible abrasive belts) with manual sharpening technology (angle-guided ceramic honing guides) to get the perfect angle every time, making it very fast and easy. Restores a dull knife to a perfect, sharp-as-new edge in just one minute, with ease. 1/2 hp induction motor for quiet smooth performance. Two flexible gooseneck lights for better illumination. Adjustable tool rests. Eye shields for safety. No load speed: 3.550 rpm. Pre-drilled heavy-duty cast iron base. Wheel size: 6" x 4/5" x 1/2". Shaft diameter: 1/2". Includes (1) 36G wheel, (1) 60G wheel and light bulbs. Net weight: 25 lbs. Adjustable tool rests. No Load Speed 3450/min, magnifying eye shields and spindle lock. Wheel dimensions: 6"x3/4"x1/2" arbor hole grinding wheels, wheel grit left 36#/right 60#; machine weight 29 lbs. Accessories include: (2) Work rest and (2) Abrasive grinding wheels.
WELD HLMET BLK MATTE AUTO-DARK SPEAKER WIRELESS W/USB M10    Work Sharp WSKTS Knife and Tool Sharpener
Ideal helmets for hobbyists and beginner welders; SHELL AND HEADGEAR FEATURES: Lightweight (less than 1 lb.), impact resistant, fireproof shell; quick-fit, 5-point adjustable geared headband with sweatband mechanism greatly reudces head/neck strain and general fatigue caused by repeated lowering of the helmet during day-to-day welding operations. AUTO-DARKENING FILTER (ADF) FEATURES: - 5.97 sq. in. (3.62" x 1.65") viewing area; DIN 9 to 13 variable shade selection (TIG operable to 15 amps); two optical arc sensors help protect against the hazards of arc flash; 1/1/1/2 optical clarity rating; UV/IR coating to reduce scratching and discoloration of the lens; 1/16,000 per second switching speed; cheater/magnifying lens compatible design. ADDITIONAL FEATURES: - external shade selector knob with grind option allows for quick shade modifications. Internal switch controls include both sensitivity (high-low) and delay (min.-max.) adjustments. Solar cells with non-replaceable 3V lithium batteries and automatic on/off technology. Meets all related CE standards (DIN and ISO), EN166, EN175, EN379, ANSI Z87.1, CSA Z94.3, AS/NZS1337 and AS/NZS1338 safety standards. Bluetooth connect with portable electronic devices up to 30' away. Premium speaker with integrated Bass Port delivers loud, clear sound at all volumes. Jobsite durability with rugged over-mold and metal speaker grill to withstand drops, water and debris. 2.1Amp USB charger for phones, media players and tablets. 3.5mm Auxiliary in port for wired playback (Cable Not Included). Integrated loop for easy hanging and transport. M12 RedLithium Battery Not Included. Multi position grinding head with belt that conforms to cutting edge of any knife or tool, appropriate angle for specific knives. Flexible abrasive belts in multiple grits, creates a taper grind. Includes: Work Sharp Power Platform, belt sharpening module, kitchen knife guide, outdoor knife guide, abrasive belt kit: (P80 coarse, P220 medium, 6000 fine honing, quick start guide and instructional DVD.
WELDING HELMET CAMO AUTO-DARK WELDING HELMET EDGE AUTO-DARK SPEAKER BLUETOOTH 12V/20V MAX
Ideal helmets for hobbyists and beginner welders; SHELL AND HEADGEAR FEATURES: Lightweight (less than 1 lb.), impact resistant, fireproof shell; quick-fit, 5-point adjustable geared headband with sweatband mechanism greatly reudces head/neck strain and general fatigue caused by repeated lowering of the helmet during day-to-day welding operations. AUTO-DARKENING FILTER (ADF) FEATURES: - 5.97 sq. in. (3.62" x 1.65") viewing area; DIN 9 to 13 variable shade selection (TIG operable to 15 amps); two optical arc sensors help protect against the hazards of arc flash; 1/1/1/2 optical clarity rating; UV/IR coating to reduce scratching and discoloration of the lens; 1/16,000 per second switching speed; cheater/magnifying lens compatible design. ADDITIONAL FEATURES: - external shade selector knob with grind option allows for quick shade modifications. Internal switch controls include both sensitivity (high-low) and delay (min.-max.) adjustments. Solar cells with non-replaceable 3V lithium batteries and automatic on/off technology. Meets all related CE standards (DIN and ISO), EN166, EN175, EN379, ANSI Z87.1, CSA Z94.3, AS/NZS1337 and AS/NZS1338 safety standards. Ideal helmets for hobbyists and beginner welders; SHELL AND HEADGEAR FEATURES: Lightweight (less than 1 lb.), impact resistant, fireproof shell; quick-fit, 5-point adjustable geared headband with sweatband mechanism greatly reudces head/neck strain and general fatigue caused by repeated lowering of the helmet during day-to-day welding operations. AUTO-DARKENING FILTER (ADF) FEATURES: - 5.97 sq. in. (3.62" x 1.65") viewing area; DIN 9 to 13 variable shade selection (TIG operable to 15 amps); two optical arc sensors help protect against the hazards of arc flash; 1/1/1/2 optical clarity rating; UV/IR coating to reduce scratching and discoloration of the lens; 1/16,000 per second switching speed; cheater/magnifying lens compatible design. ADDITIONAL FEATURES: - external shade selector knob with grind option allows for quick shade modifications. Internal switch controls include both sensitivity (high-low) and delay (min.-max.) adjustments. Solar cells with non-replaceable 3V lithium batteries and automatic on/off technology. Meets all related CE standards (DIN and ISO), EN166, EN175, EN379, ANSI Z87.1, CSA Z94.3, AS/NZS1337 and AS/NZS1338 safety standards. AC/DC powered and Auxiliary ports. Runs off Dewalt 12v/20v Max battery packs. Bluetooth 4.0 with up to 100 ft. range. Compact size for portability and storage. Rubber over mold and feet.
SPEAKER 18V/12V               ELECTRODE STEEL 40LB 1/8IN    ELECTRODE STEEL 40LB 5/32IN
SPEAKER 18V/12V
Our Price: $100.53
ELECTRODE STEEL 40LB 1/8IN
Our Price: $103.07
Equipped with Bluetooth to wirelessly connect mobile devices. Up to 32 hours of continuous operation in auxiliary mode and 31 hours with Bluetooth function enabled. Features one auxiliary port for MP3 compatibility and one USB port for charging mobile devices. Delivers rich sound; woofer for low sounds and tweeter for high sounds. Control panel for easy operation of connected mobile devices. Protective bumpers are engineered for increased durability. Water and dust resistant construction is engineered for improved operation in harsh job site conditions. Compatible with Makita 12V max CXT and 18V LXT batteries (not included). General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110.
Dewalt DW756 Bench Grinder RADIO JOBSITE 20V W/BLUETOOTH M12 2590-20 Jobsite Radio
The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 3,450 rpm no load speed, 6" wheel diameter, 1/2" spindle diameter, adjustable tool resets, length 15", weight 25.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench. Two high performance speakers provide loud sound and clear reception. Enhances sound quality with equalizer feature. Radio features AM/FM/AUX and 12 presets to save favorite stations. Bluetooth compatibility allows users to wirelessly stream music from any smart device. Durable and compact radio withstands jobsite elements and is easy to transport. Operates on any 20 volt max Lithium Ion battery. Also, an AC wall adaptor is included to provide an alternate source. Weighs only 3.2 lbs. Battery And Charger Sold Separately. Features digital signal processor, weatherproof aluminum speakers, weather sealed MP3 compartment, shock absorbing ABS polymer housing, and ultra slim size. Powered by M12 Red Lithium battery packs (sold separately) or AC adaptor. Specs: 12 V, AM/FM/AUX modes, digital display, custom EQ, backlit LCD, clock, 10 presets and weighs 3.5 lbs. Includes Auxiliary input cord, AC adaptor and 2 AAA batteries.
Drill Doctor DD500X Drill Bit Sharpener WELDING HELMET ADV AUTO-DARK  Milwaukee 2790-20 Jobsite Radio
The model 500x is designed for durability and has the flexibility required to sharpen the largest range and most popular sizes of dull or broken bits including split points and masonry bits. With its popular "push to stop" design, the 500x splitting port won't allow your point to be over split. Ideal for a serious DIYer, hobbyist and the professional drill bit user who sharpens frequently and who works in wood and metal. The large bit and reverse twist (left hand) chucks increase this models already powerful capacities. Ideal helmets for intermediate or advance welders; SHELL AND HEADGEAR FEATURES: Lightweight (approximately 1 lb.), high impact resistant nylon shell, quick-fit, 5-point adjustable geared headband with sweatband mechanism greatly reudces head/neck strain and general fatigue caused by repeated lowering of the helmet during day-to-day welding operations. AUTO-DARKENING FILTER (ADF) FEATURES: - 7.70 sq. in. (3.93" x 1.96") viewing area; DIN 9 to 13 variable shade selection (TIG operable to 8 amps); four optical arc sensors optimize arc detection and reduce the risk of blocked sensors during out-of-position welding detection; 1/1/1/2 optical clarity rating; UV/IR coating to reduce scratching and discoloration of the lens; 1/16,000 per second switching speed; cheater/magnifying lens compatible design. ADDITIONAL FEATURES: - external shade selector knob with grind option allows for quick shade modifications. Internal switch controls include both sensitivity (high-low) and delay (min.-max.) adjustments. Solar cells with 2-each replaceable 3V lithium batteries and automatic on/off technology. Meets all related CE standards (DIN and ISO), EN166, EN175, EN379, ANSI Z87.1, CSA Z94.3, AS/NZS1337 and AS/NZS1338 safety standards. Exclusive AM/FM tuner with digital processor, premium speakers and 40 Watt amplifier, weather sealed auxiliary compartment to run MP3/IPODS etc., shock absorbing ABS polymer and steel construction, customizable equalizer and 10-station preset, built-in bottle opener, durable cord wrap stores the 6 ft. AC cord. Powered by A/C power or M18 batteries (not included). Specs: 120V/AC, amplifier 40 Watts, 4" speakers high performance poly, digital display, customizable bass and treble equalizer, digital reception with signal processor tuner, auxiliary input 1/8" stereo jack, dimensions 19.5"x9.5"x11", weighs  17.5 lbs.
RADIO WORKSITE CMPCT 18/20/12V Dewalt DW758 Bench Grinder Drill Doctor DD750X Drill Bit Sharpener
Can be powered by 18v NiCad/Li-ion, 12v max or 20v max DeWalt power tool batteries. AC/DC power allowing the flexibility to be powered by AC power cord or DeWalt power batteries. Devices storage box protects digital audio devices  from jobsite debris and damage. USB power port allows device to be charged via USB when radio is plugged into AC wall outlet. 3.5mm aux. input allows for connection to CD, MP3, portable satellite receivers and other digital audio devices (aux cable included). Heavy duty design with roll cage increases durability to withstand jobsite conditions. Radio Only (Charger Sold Separately). The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 4.2 amps, 3/4HP, 3,600 rpm no load speed, 8" wheel diameter, 5/8" spindle diameter, adjustable tool resets, length 16", weight 39.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench. Permanent magnet motor produces consistent power. Push to Stop feature will not allow you to over split the bit point, adjustable material take-off, replaceable diamond sharpening wheel. Custom Point angle sharpening, choose any angle from 115 degree to 140 degrees. One chuck sharpens all sizes, 3/32"-3/4", HSS, carbide, cobalt, TiN-coated and masonry bits. Includes:  professional hard shell carrying case.
SPEAKER WRLS M12/M18          RADIO 18V/12V                 WELDING HELMET EDGE MASTER
SPEAKER WRLS M12/M18
Our Price: $150.36
RADIO 18V/12V
Our Price: $151.22
WELDING HELMET EDGE MASTER
Our Price: $154.07
Stream any audio wirelessly from any Bluetooth device. Connects up to 100 feet or use auxiliary connection. Loudest volume, lowest distortion. Two high definition mid-woofers maximize clarity at loudest volumes. Two high range tweeters drive high range of treble. Two passive radiators maximize clarity and volume of bass. 40 watt digital amplifier delivers stereo quality sound. Heavy duty construction. Water and dust protection. Impact resistant roll cage. Reinforced side caps and grill enhances impact resistance. Powered by Milwaukee M18/M12 batteries or AC outlet. USB power outlet quickly charges electronic devices in both AC and DC mode. Weighs 5.3 lbs. Dimensions: 7.5"L x 13.75"W x 6.5"H. Equipped with Bluetooth to wirelessly connect your mobile device to play music. Delivers rich sound from two powerful 3.5" side-firing speakers. It is a perfect addition to the workshop or job site. Protective bumpers are engineered for increased durability. One auxiliary port for MP3 compatibility and one USB port for charging your mobile device. Water and dust resistant construction is engineered for improved operation in harsh job site conditions. Runs up to 35 hours with an 18V LXT Lithium-Ion 5.0Ah battery and 14 hours with an 18V Compact Lithium-Ion 2.0Ah battery. Compatible with 7.2V, 12V max, 12V max CXT, 14.4V, and 18V LXT Lithium-Ion batteries. Battery and charger sold separately. The optimal helmets for professional welders; SHELL AND HEADGEAR FEATURES: Lightweight (approximately 1 lb.), high impact resistant nylon shell, quick-fit, 5-point adjustable geared headband with sweatband mechanism greatly reudces head/neck strain and general fatigue caused by repeated lowering of the helmet during day-to-day welding operations. AUTO-DARKENING FILTER (ADF) FEATURES: - 9.144 sq. in. (3.81" x 2.4") large viewing area; advanced optical technology provides ultra-high viewing definition of arc and puddle; DIN 5 to 8 cutting, low current welding; adjustable shades 5 to 9 for TIG process low intensity, oxyacetylene welding - 9 to 13 variable shade selection (TIG operable to 5 amps); four optical arc sensors optimize arc detection and reduce the risk of blocked sensors during out-of-position welding detection; 1/1/1/1 optical clarity rating; UV/IR coating to reduce scratching and discoloration of the lens; 1/20,000 per second switching speed; cheater/magnifying lens compatible design. ADDITIONAL FEATURES: - internal shade selector with grind option improves chances of accidental setting changes. Internal step-less controls include both sensitivity (high-low) and delay (min.-max.) adjustments. Solar cells with 2-each replaceable 3V lithium batteries and automatic on/off technology. Meets all related CE standards (DIN and ISO), EN166, EN175, EN379, ANSI Z87.1, CSA Z94.3, AS/NZS1337 and AS/NZS1338 safety standards.
Dewalt DC012 Worksite Charger/Radio RADIO/CHARGER JBSITE 18V AM/FM BOX DGTL PWR 3FUNC W/BLU-TH
Auxiliary port allows connection to CD Players, MP3 Players, and portable satellite receivers with an audio cable (cable not included) AM/FM digital tuner with LCD display, built-in clock, 15 station memory presets, high efficiency weather resistant speakers, dual bass ports, pivoting 11" flexible antenna, runs off of 7.2V to 18V Dewalt batteries making it a cordless radio, 3-stage charging system provides maximum run-time, power outlets, one hour charger for 7.2V to 18V Dewalt battery packs (except Univolt). Specs: charge time is one hour or less, weighs 14.25 lbs Includes: Radio/Charger, 16" auxiliary input cords. 2- AAA batteries. Digital bluetooth receiver streams audio wirelessly from over 100 ft. away., USB power port, premium speakers and 40- watt amplifier, customizable equalizer and 10-station preset, reinforced roll cage, metal handles, on-board bottle opener. 12"L, 15:H, 12"W., 17Lbs. The jobsite radio/charger/digital media stereo features Bluetooth technology to connect to the user's smart device (with a range of up to 150 ft) and stream internet radio and stored music. This portable, high performance, weather resistant entertainment system delivers 360? enriched stereo sound. Its four way speakers and a subwoofer provide outstanding sound quality in all directions. Durable, with an aluminum/rubber roll cage and a weather resistant design. The portable radio features a powered USB port. Can be powered by Bosch 18V Lithium-Ion batters or plugging into a 120 V outlet. Its built-in battery charger will charge the user's Lithium_ion batteries as well. Also features (4) 120 V power outlets for connecting tools or other devices. Includes (1) 6" male to male Aux cable and (2) AA batteries.
RADIO/CHARGER TOUGH SYSTEM    CHARGER RADIO BLUTOOTH 12V/20V DeWalt DCR015 Worksite Charger Radio
RADIO/CHARGER TOUGH SYSTEM
Our Price: $211.89
Highly durable, portable and stackable solution designed to supply crisp, clear sound through either the radio functionality or wirelessly through any Bluetooth connectivity. 4 full range tweeters, 1 Subwoofer and 1 assisted bass resonator. IP54 rated for water and dust resistance. TouchSystem carrier cart compatible. Can run on a 12 volt max or 20 volt max Dewalt Li-Ion power tool battery or can be plugged into a wall outlet. Charging capability; built-in charger ensures jobsite productivity by charging 12 volt max and 20 volt max Dewalt power tools. Connectivity to Bluetooth, 3.5mm aux. Input, 5V/1A USB charger. Can be stacked to other ToughSystem modules. Designed to be the most versatile Jobsite radio charger. This charger radio is able to run off and charge all DeWalt slide pack battery packs including 12 volt, 20 volt and FlexVolt packs at 3 amps when plugged into an AC outlet. The unit is designed to include woofers, tweeters and air ports to provide clear and rich sound at all volume levels. An oversized device storage box protects devices from worksite conditions and includes an auxiliary and 2.1 amp USB charging port for convenient device charging. 2 AC power outlets on the side of the unit allow you to plug in additional tools or chargers without occupying additional outlets on the wall. Audio Visual Remote Control Protocol (AVRCP) allows you to control your device from the radio interface so you can keep the device in a safe place and skip to the next song or hit replay on the radio interface. Also contains a bottle opener for convenience. 2 amp charger for 12V Max and 20V Max Dewalt battery packs allows for quick and convenient battery charging. Runs of 12V Max and 20V Max DeWalt batteries making it a cordless radio capable of running off rechargeable and reusable battery power. 2 AC power outlets offer more versatility for jobsite power. Auxiliary and USB ports allows for connection to cd, mp3, portable satellite receivers and other digital audio devices. USB port allows device to be charged via USB ports. Class D amplifier, woofers and tweeters provide full range of high and low sound for optimum sound quality.
   
 
1