Home > METAL WORK & DRILLING > COUNTERSINKS > COUNTERSINK
Choose a sub category:
MOBILE HOME HARDWARE MOBILE HOME PLUMBING MOBILE HOME HVAC
MOBILE HOME ELECTRICAL MOBILE HOME TIE-DOWN
Sort By:
1 2 3
American Hardware RV-354C Mounting Block American Hardware WP-9805C Drawer Roller Guide American Hardware WP-1006C Left/Right Hand Drawer Back Socket
Zinc plated steel. For use with metal and plastic 7-way connectors. Low friction disc rollers. Size: 3/8" x 7/8" x 3" x 1-1/4". 1 set per card.
American Hardware WP-9871C Drawer Rear Guide American Hardware RV-496C 4-Way Trailer Connector American Hardware RV-358C 4-Way Flat Molded Cable Adapter
Contains a left and right adjustable two piece rear drawer socket. Adjusts 1/4" - 1-1/2". 1 set per card. Chrome connector. High impact insulators and split brass contacts. Mounting holes 1-34" on centers. Male one end, female on the other.
DrillCo 36E112A 3/16 Countersink 60Deg SINGLE FLUTE DrillCo 36E112B 3/16 Countersinks 82Deg SINGLE FLUTE DrillCo 36E112C 3/16 Countersinks 90Deg SINGLE FLUTE
DrillCo 36E112A 3/16 Countersink 60Deg SINGLE FLUTE
List Price: $11.84
Our Price: $8.88
Savings: $2.96
DrillCo 36E112B 3/16 Countersinks 82Deg SINGLE FLUTE
List Price: $11.84
Our Price: $8.88
Savings: $2.96
DrillCo 36E112C 3/16 Countersinks 90Deg SINGLE FLUTE
List Price: $11.84
Our Price: $8.88
Savings: $2.96
Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman. Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman. Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman.
DrillCo 36E112D 3/16 Countersinks 100Deg SINGLE FLUTE American Hardware RV-360C 6-Way Square Molded Connector DrillCo 36E116A 1/4 Countersink 60Deg SINGLE FLUTE
DrillCo 36E112D 3/16 Countersinks 100Deg SINGLE FLUTE
List Price: $11.84
Our Price: $8.88
Savings: $2.96
DrillCo 36E116A 1/4 Countersink 60Deg SINGLE FLUTE
List Price: $12.47
Our Price: $9.36
Savings: $3.11
Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman. Brown wire to tail light; yellow wire to left turn light; green wire to right turn light; white wire to ground; blue wire to auxiliary light; and red wire to stop light. Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman.
DrillCo 36E116B 1/4 Countersinks 82Deg SINGLE FLUTE DrillCo 36E116C 1/4 Countersinks 90Deg SINGLE FLUTE DrillCo 36E116D 1/4 Countersinks 100Deg SINGLE FLUTE
DrillCo 36E116B 1/4 Countersinks 82Deg SINGLE FLUTE
List Price: $12.47
Our Price: $9.36
Savings: $3.11
DrillCo 36E116C 1/4 Countersinks 90Deg SINGLE FLUTE
List Price: $12.47
Our Price: $9.36
Savings: $3.11
DrillCo 36E116D 1/4 Countersinks 100Deg SINGLE FLUTE
List Price: $12.47
Our Price: $9.36
Savings: $3.11
Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman. Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman. Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman.
American Hardware RV-497C 4-Way Car End Connector Bargman RV-488C 7-Way Trailer Connector DrillCo 36E120A 5/16 Countersink 60Deg SINGLE FLUTE
DrillCo 36E120A 5/16 Countersink 60Deg SINGLE FLUTE
List Price: $13.48
Our Price: $10.11
Savings: $3.37
Chrome connector with polarized chrome plated housing and spring loaded cover. High impact insulators and split brass contacts. Mounting holes 1-3/4" on centers. Brass contacts to prevent corrosion and disconnect. Built-in clamp prevents cable wear. Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman.
DrillCo 36E120B 5/16 Countersinks 82Deg SINGLE FLUTE DrillCo 36E120C 5/16 Countersinks 90Deg SINGLE FLUTE DrillCo 36E120D 5/16 Countersinks 100Deg SINGLE FLUTE
DrillCo 36E120B 5/16 Countersinks 82Deg SINGLE FLUTE
List Price: $13.48
Our Price: $10.11
Savings: $3.37
DrillCo 36E120C 5/16 Countersinks 90Deg SINGLE FLUTE
List Price: $13.48
Our Price: $10.11
Savings: $3.37
DrillCo 36E120D 5/16 Countersinks 100Deg SINGLE FLUTE
List Price: $13.48
Our Price: $10.11
Savings: $3.37
Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman. Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman. Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman.
DrillCo 36E124A 3/8 Countersink 60 DEG SINGLE FLUTE DrillCo 36E124B 3/8 Countersinks 82Deg SINGLE FLUTE DrillCo 36E124C 3/8 Countersinks 90Deg SINGLE FLUTE
DrillCo 36E124A 3/8 Countersink 60 DEG SINGLE FLUTE
List Price: $14.36
Our Price: $10.77
Savings: $3.59
DrillCo 36E124B 3/8 Countersinks 82Deg SINGLE FLUTE
List Price: $14.36
Our Price: $10.77
Savings: $3.59
DrillCo 36E124C 3/8 Countersinks 90Deg SINGLE FLUTE
List Price: $14.36
Our Price: $10.77
Savings: $3.59
Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman. Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman. Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman.
DrillCo 36E124D 3/8 Countersinks 100Deg SINGLE FLUTE Bargman RV-494C 6-Way Trailer End Connector Bargman RV-490B 7-Way Car End Connector
DrillCo 36E124D 3/8 Countersinks 100Deg SINGLE FLUTE
List Price: $14.36
Our Price: $10.77
Savings: $3.59
Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman. Die cast zinc with round brass split pins to ensure positive contact. Floating male pins for easy connect and disconnect. Interchangeable with all popular 6-way connectors. Brass contacts to prevent corrosion. Easy to connect and disconnect. Built-in clamp prevents cable wear.
DrillCo 36E132A 1/2 Countersink 60Deg SINGLE FLUTE DrillCo 36E132B 1/2 Countersinks 82Deg SINGLE FLUTE DrillCo 36E132C 1/2 Countersinks 90Deg SINGLE FLUTE
DrillCo 36E132A 1/2 Countersink 60Deg SINGLE FLUTE
List Price: $18.02
Our Price: $13.52
Savings: $4.50
DrillCo 36E132B 1/2 Countersinks 82Deg SINGLE FLUTE
List Price: $18.02
Our Price: $13.52
Savings: $4.50
DrillCo 36E132C 1/2 Countersinks 90Deg SINGLE FLUTE
List Price: $18.02
Our Price: $13.52
Savings: $4.50
Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman. Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman. Single Flute Countersinks should be used when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. 60° Countersinks are used for centering. 82° Countersinks are used for countersinking flathead screws. 90° Countersinks are used for chamfering and deburring. 100° Countersinks are used to make screw and rivet holes. Must be ordered in multiples of 1, unless cleared with a salesman.
   
 
1 2 3