Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > WELDING SUPPLIES > WELDING SAFETY GOGGLES & GLASS
Sort By:
1
LENS REPL 2X4-1/4IN CLR       LENS REPL FORNEY 2X4-1/4IN CLR LENS REPL 2X4-1/4IN SHD5
Replacement 2" (50.8mm) x 4-1/4" (107.95mm) welding helmet cover lens. High quality material offers superior protection from dust, weld spatter and impact. Meets ANSI Z87.1 safety standards. Fits "Forney" 55663 ("Slim Line"), 55666 (sku # 891.0069) and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening. Replacement 2" (50.8mm) x 4-1/4" (107.95mm) welding helmet cover lens. High quality material offers superior protection from dust, weld spatter and impact. Meets ANSI Z87.1 safety standards. Fits "Forney" 55663 ("Slim Line"), 55666 (sku # 891.0069) and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening. Hardened welding lens. Meets ANSI Z87.1 safety standards. Fits "Forney" 55663 ("Slim Line"), 55666 (sku # 891.0069) and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening. UV/IR protection.
LENS SHD WELD N8 REPL 2X4.25IN LENS REPL 2X4-1/4IN SHD9      LENS REPL 2X4-1/4IN SHD10
Hardened welding lens. Meets ANSI Z87.1 safety standards. Fits "Forney" 55663 ("Slim Line"), 55666 (sku # 891.0069) and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening. UV/IR protection. Hardened welding lens. Meets ANSI Z87.1 safety standards. Fits "Forney" 55663 ("Slim Line"), 55666 (sku # 891.0069) and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening. UV/IR protection. Hardened welding lens. Meets ANSI Z87.1 safety standards. Fits "Forney" 55663 ("Slim Line"), 55666 (sku # 891.0069) and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening. UV/IR protection.
LENS HARDENED 4-1/4X2IN NO 11 LENS REPL 4-1/2X5-1/4IN CLR   MINI WELDERS SS BRUSH
Replacement 2"  x 4-1/4". Meets ANSI Z87.1 Safety Standards. Fits Forney 55663 ("Slim Line"), 55666 ("Bandit I"), and 55680 ("Super Slim") welding helmets and most brand name helmets. UV/IR protection. High quality material offers superior protection from dust, weld spatter and impact. Meets ANSI Z87.1 Safety Standards. Fits Forney 55647 ("Patriot"), 55669 ("Finish Line"), 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets. 7-1/4" Polypropylene handle; Made in the U.S.A.
MINI WELDERS NYLON BRUSH      MINI WELDERS BRASS BRUSH      LENS HARDENED 4-1/4X2IN NO 12
7-1/4" Polypropylene handle; Made in the U.S.A. 7-1/4" Polypropylene handle; Made in the U.S.A. Replacement 2"  x 4-1/4". Meets ANSI Z87.1 Safety Standards. Fits Forney 55663 ("Slim Line"), 55666 ("Bandit I"), and 55680 ("Super Slim") welding helmets and most brand name helmets. UV/IR protection.
BRSH WIRE 8-1/2IN MTL         FLINT RFL FORNEY WELDING 5PK  BRUSH WIRE BRASS 7-3/4X3/8IN
Tube brush with wire loop-end handle. Single stem/single spiral with .005" (.127mm) nylon bristles. Ideal for cleaning bottles, carburetors, brake cylinders, radiator hoses, engine blocks, blocked hoses, drains, etc. Replacement flints for single flint striker. Fits "Forney" 86102 (sku #: 891.2586) and all standard screw-on type lighters. 5-pack. Strong and durable with solidly imbedded bristles. Will not rust. Long wood handle with pre-drilled hang hole. Ideal for general purpose cleaning and excellent for cleaning stainless steel. Features .006" (.15mm) brass wire in 3 x 7 rows.
GLASSES SAFETY VISITORS CLEAR BRUSH WIRE SS/NYLON 7-1/4X.006 BRUSH WIRE BRASS 7.25X.006IN
Features high impact scratch resistant polycarbonate lenses and non-slip temples. Provides 99.9% UV protection. Meets ANSI Z87.1+safety standards. Small, strong and durable with solidly imbedded bristles; 7-1/4" (184.1mm) long plastic handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Features .006" (.15mm) wire in 3 x 7 rows. Small, strong and durable with solidly imbedded bristles; 7-1/4" (184.1mm) long plastic handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Features .006" (.15mm) wire in 3 x 7 rows.
LIGHTER OXY/ACETYLENE 1 FLINT BRUSH WIRE SS/WD 8-5/8X.006IN FLINT REPLACEMENT TRIPLE
Features a square hood and round file with a patented assembly. Strong and durable with solidly imbedded stainless steel (SS) bristles. Long curved wood handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Angled head design eliminates cut and bruised knuckles. Features .006" (.15mm) diameter. Includes four (4) replacement triangles for a total of 12 flints.
LENS REPL 4-1/2X5-1/4IN SHD10 LENS CLEAR WELD N10 4.5X5.25IN LENS HARDENED 5-1/4X4-1/2 NO11
Replacement lens. Meets ANSI Z87.1 safety standards. Fits "Forney" 55647 ("Patriot"), 55669 ("Finish Line", 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets using a 5-1/4" (133.35mm) x 4-1/2" (114.3mm) window opening. UV/IR protection. Replacement lens. Meets ANSI Z87.1 safety standards. Fits "Forney" 55647 ("Patriot"), 55669 ("Finish Line", 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets using a 5-1/4" (133.35mm) x 4-1/2" (114.3mm) window opening. UV/IR protection. Replacement Lens, 5-1/4" x 4-1/2". Meets ANSI Z87.1 Safety Standards. Fits Forney 55647 ("Patriot"), 55669 ("Finish Line"), 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets. UV/IR protection.
BRUSH TUBE NYLON/WIRE .75X8.5 LENS WELDING SHADE NO9 4-1/4X2 LENS WELDING SHADE NO10 4-1/4
Tube brush with wire loop-end handle. Single stem/single spiral with .005" (.127mm) nylon bristles. Ideal for cleaning bottles, carburetors, brake cylinders, radiator hoses, engine blocks, blocked hoses, drains, etc. Replacement shade 2" (50.8mm) x 4-1/4" (107.95mm). For prolonged periods of welding and/or to see true flame arc and puddle color. The gold coating reflects 90% of radiated heat for cooler operation and less eye fatigue. Provides UV/IR protection. Meets ANSI Z87.1 Safety Standards. Fits Forney 55663 ("Slim Line"), 55666 ("Bandit I"), and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening. Replacement shade 2" (50.8mm) x 4-1/4" (107.95mm). For prolonged periods of welding and/or to see true flame arc and puddle color. The gold coating reflects 90% of radiated heat for cooler operation and less eye fatigue. Provides UV/IR protection. Meets ANSI Z87.1 Safety Standards. Fits Forney 55663 ("Slim Line"), 55666 ("Bandit I"), and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening.
BRUSH TUBE NYLON 1.25INX15.5IN BRUSH WIRE 3X7IN WOODEN HNDL  LGTR FLNT THREE UNIV
Tube brush with wire loop-end handle. Single stem/single spiral with .005" (.127mm) nylon bristles. Ideal for cleaning bottles, carburetors, brake cylinders, radiator hoses, engine blocks, blocked hoses, drains, etc. Strong and durable with solidly imbedded bristles. Will not rust. Long wood handle with pre-drilled hang hole. Ideal for general purpose cleaning and excellent for cleaning stainless steel. Features .006" (.15mm) brass wire in 3 x 7 rows. Quality tool with a rugged frame and three (3) large flints. Long lasting round file and bright plated finish. Dependable ignition under all working conditions. Release slotted screw to rotate fresh flint into position.
BRUSH WIRE BRASS 8-5/8X1/2IN  BRUSH WIRE CRVD 13-3/4X.014IN LENS SAFETY CLR PLAST F-55652
Strong and durable with solidly imbedded brass bristles. Will not rust. Long curved wood handle with pre-drilled hang hole. Ideal for general purpose cleaning and excellent for finish or delicate cleaning of stainless or polished steel. Angle head design eliminates cut or bruised knuckles. Features .006" (.15mm) brass wire in 2 x 9 rows. Strong and durable with solidly imbedded carbon steel (CS) bristles. Curved wood handle with pre-drilled hang hole. Ideal for aggressive cleaning and removing rust and paint from most surfaces. Angled head design eliminates cut and bruised knuckles. Feature .014" (.36mm) CS wire. Forney Industries Welding Helmet Safety Lens, Replacement, Suitable For Use With: 55652 Welding Helmets, Plastic, Clear
BRUSH WIRE STEEL 10-1/4X.014IN BRUSH BRASS SCRATCH SHOE HNDL LENS HARDENED 5-1/4X4-1/2 NO9
Strong and durable with solidly imbedded carbon steel (CS) bristles. Curved wood handle with pre-drilled hang hole. Ideal for aggressive cleaning and removing rust and paint from most surfaces. Angled head design eliminates cut and bruised knuckles. Feature .014" (.36mm) CS wire. Strong and durable, solidly imbedded brass bristles, with pre-drilled hang hole. Will not rust. Ideal for general purpose cleaning and excellent for cleaning stainless steel. Features .012" (.33mm) brass wire in 4 x 16 rows. Replacement Lens, 5-1/4" x 4-1/2". Meets ANSI Z87.1 Safety Standards. Fits Forney 55647 ("Patriot"), 55669 ("Finish Line"), 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets. UV/IR protection.
JIG WELDING MAGNETIC LIFT 25LB BRUSH WIRE STL 13-11/16X.014IN GLASSES SAFETY CLEAR/PINK
Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks. Strong and durable with solidly imbedded carbon steel (CS) bristles. Long curved wood handle with pre-drilled hang hole. Ideal for aggressive cleaning and removing rust and paint from most surfaces. Angled head design eliminates cut and bruised knuckles. Features .014" (.36mm) diameter. Includes metal scraper. Specifically designed to fit smaller, narrower faces. These include a deep temple design that provides good side impact protection. The clear lens is best used indoors or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
LENS HARDENED 5-1/4X4-1/2 NO12 BRUSH WIRE WDN 10-1/2IN       BRUSH WIRE STEEL 10-1/4X.014IN
Replacement Lens, 5-1/4" x 4-1/2". Meets ANSI Z87.1 Safety Standards. Fits Forney 55647 ("Patriot"), 55669 ("Finish Line"), 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets. UV/IR protection. Durable, with a polypropylene handle and bristles. Resistant to most auto parts cleaning solutions. One-piece unitized brush vulcanized in rubber. Metal ferrule for more support and durability plus a slightly heavier fill. Use to clean motors, machinery and metal parts. Good for removing gasket material or baked-on varnish. Strong and durable with solidly imbedded carbon steel (CS) bristles. Long curved wood handle with pre-drilled hang hole. Ideal for aggressive cleaning and removing rust and paint from most surfaces. Angled head design eliminates cut and bruised knuckles. Features .014" (.36mm) diameter. Includes metal scraper.
LENS SAFETY CLR PLS F-55652/53 BRUSH WIRE SS/WD 13-3/4X.013IN BRUSH BRASS SCRATCH WD HANDLE
Forney Industries Welding Helmet Cover Lens, Replacement, Suitable For Use With: 55652 and 55653 Welding Helmets, Plastic, Clear Strong and durable with solidly imbedded stainless steel (SS) bristles. Long curved wood handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Angled head design eliminates cut and bruised knuckles. Features .006" (.15mm) diameter. Strong and durable, solidly imbedded brass bristles, with pre-drilled hang hole. Will not rust. Ideal for general purpose cleaning and excellent for cleaning stainless steel. Features .012" (.33mm) brass wire in 3 x 19 rows.
BRUSH WIRE SS/WD 10-1/4X.013IN BRUSH STEEL V-GROOVE WD HNDL  CLNR TIP SZ KING STANDARD
Strong and durable with solidly imbedded stainless steel (SS) bristles. Long curved wood handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Angled head design eliminates cut and bruised knuckles. Features .006" (.15mm) diameter. For cleaning tight hard-to-reach areas such as tee welds, concrete, driveway joints, auto body seams, removing paint in corners, etc. With pre-drilled hang hole and .014" (.36mm) carbon steel wire in 3 x 19 rows. Tip cleaner kit provides as many as 60 or more cleaning edges per inch of cleaner. Fits all tip sizes. Light and easy to use. Contains 11 sizes - 6 through 26. Aluminum case includes dressing tool.
CLNR TIP SZ KING XLG          SHIELD FACE CLEAR REPL15.5X8IN GLASSES SAFETY BLUE MIRROR
Tip cleaner kit provides as many as 60 or more cleaning edges per inch of cleaner. Fits all tip sizes. Light and easy to use. Contains 11 sizes - 6 through 26. Aluminum case includes dressing tool. Replacement clear grinding shield for "Forney" 58600 (sku # 891.0275) and 58605 grinding shield assemblies. Meets ANSI Z87.1 safety standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING. Sleek and compact; weighs less than one ounce; offers serious all-day comfort with a stylish look and extreme durability; independently certified; provides 99.9% UV protection; meets ANSI Z87.1+ safety standards.
BRUSH STAINLESS STEEL V-GROOVE FILTER VACUUM CLOTH 3PK       LENS WELDING SHADE NO9 5-1/4IN
FILTER VACUUM CLOTH 3PK
Our Price: $8.23
For cleaning tight hard-to-reach areas in cook-out grills, dairy operations, restaurants, boats and areas where humidity is a problem. Ideal for cleaning most aluminum. Features pre-drilled hang hole and .014" (.36mm) stainless steel wire in 3 x 19 rows. Designed for use with the Makita Cordless Vacuum models BCL180W, XLC02, and LC01 to filter debris. Reusable, easy to clean design. Made of durable cloth for added durability and long life. Includes: (3) cloth vacuum filters. Replacement shade 5-1/4" (133.35mm) x 4-1/2" (114.3mm) glass welding filter lens. For prolonged periods of welding and/or to see true flame arc and puddle color. The gold coating reflects 90% of radiated heat for cooler operation and less eye fatigue. Provides UV/IR protection. Meets ANSI Z87.1 Safety Standards. Fits Forney 55647 ("Patriot"), 55669 ("Finish Line"), 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets using a 5-1/4" (133.35mm) x 4-1/2" (114.3mm) window opening.
LENS WELDING SHADE NO10 5-1/4 FACE SHIELD GREEN UNIV8X15-1/2 STORAGE ROD RED 10LBS 14-3/8IN
Replacement shade 5-1/4" (133.35mm) x 4-1/2" (114.3mm) glass welding filter lens. For prolonged periods of welding and/or to see true flame arc and puddle color. The gold coating reflects 90% of radiated heat for cooler operation and less eye fatigue. Provides UV/IR protection. Meets ANSI Z87.1 Safety Standards. Fits Forney 55647 ("Patriot"), 55669 ("Finish Line"), 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets using a 5-1/4" (133.35mm) x 4-1/2" (114.3mm) window opening. 15-1/2" (393.7mm) x 8" (203.2mm) replacement green grinding shield for Forney 58604 and 58606 grinding shield assemblies. Meets ANSI Z87.1 Safety Standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING. Made of high impact polypropylene plastic. Includes four (4) internal compartments to separate rod. Screw-type cap and rubber o-ring provide clean, dry, air-tight storage for electrodes. Store up to 10 Lbs.
SPRY ANTI-SPLATTER 13OZ       GEL WELDING NOZZLE16OZ NO SILI PICK SET REPAIR 4-WAY 4-PIECE
Prevents weld spatter from adhering to MIG nozzles, contact tips, weld area and work surface. Eliminates erratic operation with a film that will not clog orifices and threads on MIG nozzles and contact tips. Suitable for use on fixtures of semi- and automatic welders. Odorless, non-flammable, non-toxic and silicone free, it will not cause porosity. A general purpose repair kit containing (1) each easy-pick hook (o-ring remover), easy-pick 90 degree scribe, easy-pick double scribe and easy-pick straight scribe.
MGNT ALL PUR 6-1/4IN 1/PK     GOGGLES OXY/ACET NUM 5SHD 50MM GLASSES SAFETY CLR/PINK FLEX
Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks. Features two separate 50mm round #5 shaded hardened eye-pieces. Equipped with cover lenses. Folds up to pocket size for storage and carrying. Meets ANSI Z87.1 safety standards. "Forney" 56900 (shaded) and 56901 (clear) replacement 50mm eye-pieces are available separately. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY. Include patented temple technology designed to relieve pressure on the ear while providing excellent stability and comfort. Additional features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. These clear lenses are best used for indoor/outdoor use or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
JIG SUPPORT MAG LRG 45/90/135 GLASSES SAFETY CLR/BLK FLEX   GLASSES SAFETY BLUEMIRROR/BLUE
Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks. Include patented temple technology designed to relieve pressure on the ear while providing excellent stability and comfort. Additional features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. These clear lenses are best used for indoor/outdoor use or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
GLASSES SAFETY CLR/GRAY FRAME WLDG GOGGLES CYCLOPS UNIV     PLIERS LOCKING 4-PRONG 8-3/8IN
Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Featuring 2" (50.8mm) x 4-1/4" (107.95mm) #5 shade hardened lens with clear glass cover lens. Meets ANSI Z87.1 safety standards. Conforms comfortably to the head and allows ample room to fit over regular eye glasses. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY. 8-3/8" (212.8mm) long with 2" (50.8mm) maximum jaw opening and 2-1/2" - 3" (63.5mm - 76.2mm) depth. Designed to grip a few inches from the end of the metal. Allows weld to start or finish at the end of the joint. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING.
GLASSES SAFETY GRAY/BLK FRAME GLASSES SAFETY BLUE MIRROR/BLK GLASSES SAFETY CLR/CAMO FRAME
Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards.
GLASSES SAFETY AMBER/CAMO FRM GLASSES SAFETY BRNZ/CAMO FRAME LENS MAGNIFY WELD F1/50 DIOP
Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards. Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards. Magnifying Lens, 2" (50.8mm) x 4-1/4" (107.95mm) welding lens. Allows user to weld with or without eye glasses. Meets ANSI Z87.1 Safety Standards. Fits Forney 55680 ("Super Slim") welding helmets and most brand name helmets using 2" (50.8mm) x 4-1/4" (107.95mm) window opening.
LENS MAGNIFY WELD F2/0 DIOP   PLIERS LOCKING CCLAMP 10-1/2IN GLASSES/GOGGLE SAFETY CLEAR
Magnifying Lens, 2" (50.8mm) x 4-1/4" (107.95mm) welding lens. Allows user to weld with or without eye glasses. Meets ANSI Z87.1 Safety Standards. Fits Forney 55680 ("Super Slim") welding helmets and most brand name helmets using 2" (50.8mm) x 4-1/4" (107.95mm) window opening. 10-1/2" (266.7mm) long with 3-3/4" (95.3mm) maximum opening and 3" (76.2mm) depth. Extra clamping capacity for large objects. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING. Clear lens and anti-fog coating. Includes temple and head straps which allow an individual to swap between safety glasses and goggles. Soft foam lining around the frame which block out debris. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards.
DRILL TIP SET HI CARBON STL 12 PLIERS MIG 7 IN 1 INSULATED   GOGGLES WELDING FLIP 2X4-1/4IN
Twelve (12) high carbon steel tip drills stored in a barrel. Sizes #52 through 74 within a pencil compatible design. Includes pocket clip. Used to clean and true most standard orifices of acetylene welding and cutting tips. Use "Forney" 86139 for replacement cleaning drills.     These MIG pliers includes seven features for MIG welding applications. The features include: (1) Needle nose pliers grip for pulling, (2) Small serrated hole for MIG tips, (3) Flat surfaces for hammering, (4) Cutter to trim MIG wire, (5) large serrated hole for nozzle, (6) Spring loaded handle and (7) Heavy insulated comfort grip. Featuring 2" (50.8mm) x 4-1/4" (107.95mm) #5 shade hardened lens with clear glass cover lens. Meets ANSI Z87.1 safety standards. Conforms comfortably to the head and allows ample room to fit over regular eye glasses. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY.
SHIELD FACE CLEAR LIGHTWEIGHT C-CLAMP LOCKING JAWPAW10-1/2IN FACE SHIELD CLEAR GRINDING
Complete assembly with pin-type headgear and 15-1/2" (393.7mm) x 8" (203.2mm) clear grinding shield. Lightweight design for maximum comfort. Tough non-warping red polyethylene visor. Meets ANSI Z87.1 safety standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING. "Forney" 58602 (sku # 891.0283) is replacement clear shield. 10-1/2" (266.7mm) long with 3-3/4" (95.3mm) maximum opening and 3" (76.2mm) depth. Extra clamping capacity for large objects. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING. Complete assembly with ratcheting-type headgear and 15-1/2" (393.7mm) x 8" (203.2mm) grinding shield. Lightweight design for maximum comfort. Tough non-warping polyethylene visor. Meets ANSI Z87.1 Safety Standards. Forney 58608 is replacement ratcheting-type headgear. Forney 58602 is replacement clear shield. NOT TO BE USED FOR OXY-ACETYLENE WELDING.
Irwin 25 Welding Clamp GUIDE PIPE CUTTING 2-3/8TC 4-1 GUIDE PIPE CUTTING 2-7/8TC 4-1
For use in welding applications or for holding awkward shapes in place. U- shaped jaws provide enhanced visibility and more working space. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Throat depth 1-3/4", Jaw capacity 1-5/8"; Jaw depth 1-3/4". Made from high grade steel so it's reusable. Four different cuts from each guide: Saddle cut, 45 degree, 22-1/2 degree and 90 degree. Includes a spring loaded hinge. Painted red. Made from high grade steel so it's reusable. Four different cuts from each guide: Saddle cut, 45 degree, 22-1/2 degree and 90 degree. Includes a spring loaded hinge. Painted red.
WHEEL/HANDLE KIT-313/314WELDRS VACUUM HAND 12V 29MINS 18.5IN BLOWER COMPACT 3SPD 18V 100CFM
Wheel and handle kit for "Forney" 00313 & 00314 ARC Welders (sku #: 890.9400). Includes: vacuum, crevice tool, extension wand, filter assembly, utility nozzle. Deliver 33DFM for use on wide range of materials. Up to 29 minutes on a single charge using Red lithium XC4.0 batteries, reusable 42 pleat filter, lock-on switch reduces user fatigue. 18.5" L., 2.25 lbs. 3-Speed electronic switch and variable speed trigger allow for versatile clearing power, lock-on switch reduces user fatigue, extension nozzle clears dust and debris easily from the ground or overhead without having to lean over or stretch, universal inflator/deflator for easy set-up and take-down of most inflatable products, shock-absorbing polymer and reinforced handle resists drops, nozzle made from soft plastic to resist crushing or cracking. 2.6 lb., 6-1/2" H, 100 CFM max air flow. BATTERY NOT INCLUDED. Works with all Milwaukee M18 Batteries (batteries sold separately).
VACUUM CORDLESS WET/DRY 18VOLT CART WELDER PTBL 11.5X27.5 BLK MK Diamond 158252 Bench Top Corded Tile Saw
Includes: Vacuum, crevice tool, filter assembly, and wide utility nozzle. Working on all Milwaukee 18V slide-on batteries, RED LITHIUM or NiCd, the 0880-20 wet/dry vacuum offers long continuous run time and high air power and suction to provide quick and easy removal of dust, debris and water. A washable, reusable wet/dry HEPA filter delivers excellent fine dust collection and does not need to be changed. 9.4 lb., 11-1/2" H, Max Air Flow 45 CuFt Min. Fits "Forney" 300 series welders and plasma cutters and all similar sized welders. 11-1/2" wide x 27-1/2" tall. 3-levels. Four casters included. 1.0mm thick steel. Max recommended weight capacity: 90 lbs (40.8 Kg). Light weight and compact saw with detachable table stop that prevents saw from moving away from operator when pushing material into blade, rips ceramic and stone tiles up to 12", immersion blade cooling system requires no pump, built in 45 degree miter table, easy alignment rip guide, 45 degree rip guide, safeswitch prevents saw from being operated when locking key is removed. Specs: 120V, 5,500 RPM, blade capacity  4-1/2", depth of cut (4-1/2" blade) 1", weight 12 lbs., 18"Lx16"Wx7"H, UL approved. Includes: internal cord storage, 4-1/2" wet diamond blade included, rip guide, 45 degree rip guide, table stop.
M-D 48190 Portable Corded Tile Saw SAW MITER COMPOUND 10IN       MITERSAW COMPOUND 10IN W/LASER
SAW MITER COMPOUND 10IN
Our Price: $143.64
For cutting a variety of ceramic, porcelain, and stone tile, diamond coated edge to cut through hard material, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, carrying handle, tilting table allows for miter cuts. Adjustable rip guide. Specs: : Motor: 3/4 HP, 3.5 AMPS. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 13" x 14-3/4". Weight: 20lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-3/8".  Use replacement blade 5542840 Large table for better material support with vice clamping system to secure work space. Thumb actuated positive stops for quick miter adjustments. Dust collector attachment minimizes airborne particles. Specs: 5,000 rpm, 0-52 degree miter angle to the left and right for increased flexibility, 0-45 degree bevel angle to the left to provide clean and accurate bevel cuts. Includes: 24T TCT saw blade, dust bag, vise assembly, 5mm hex bar wrench, and holder. Make precision miter cuts up to 45 degrees left and right with 9 stops at commonly used angles. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-Tipped blade installed, hold-down clamp, dust bag, two extension wings, blade wrench and two AAA batteries for laser. No load speed: 4600 rpm. Weighs 24 lbs.
VACUUM KIT 18V COMPCT LITH-ION SAW COMPOUND MITER 10 INCH    VACUUM COMPACT KIT 20AH 18V
Up to 15 minutes of continuous use from a single fully charged 18 volt compact Lithium-Ion battery. Re-designed floor nozzle for improved maneuverability and debris collection. Strong suction power for fast and efficient cleaning. Bag-less 2-stage cloth filtration system allows for easier cleaning and quicker debris disposal. Compact and ergonomic design at only 18-3/4" long. Ergonomic soft grip handle provides increased comfort and control. 18 volt compact battery is compatible with 18 volt LXT tools. Provides more run time per charge, reaches full charge in 25 minutes or less and features an integrated L.E.D. battery charge level indicator. Equipped with Star Protection computer controls to protect against overloading, over-discharging and over heating. Rapid Optimum charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. Weighs only 2.7 lbs with battery for reduced operator fatigue. Kit includes: (1) 18 v Compact Lithium-Ion 2.0Ah battery, (1) 18 v Lithium-Ion rapid optimum charger, (1) extension attachment, (1) floor nozzle, (1) filter and (1) cloth vacuum filter. 10" Compound miter saw with 14 amp motor, 5,200 rpm. Maximum cut capacity at 90? degree miter - 4"x4" and 2"x6" dressed lumber. Maximum cut capacity at 45? miter - 2"x4" and 1"x6" dressed lumber. Maximum cut capacity at 45? bevel - 2"x4". Miters 45 to 90 degrees; bevels 0-45 degrees. Lightweight die cast aluminum base allows for weight of 36.6 lbs. Accepts SS9100 (087.7894) leg stand and material supports. Includes dust bag, work clamp, 40th carbide tipped blade and blade wrench. Up to 13 minutes of continuous use from a single fully charged 18 volt compact Lithium-Ion battery. Re-designed floor nozzle for improved maneuverability and debris collection. Strong suction power for fast and efficient cleaning. Bag-less 2-stage cloth filtration system allows for easier cleaning and quicker debris disposal. Compact and ergonomic design at only 18-3/4" long. Ergonomic soft grip handle provides increased comfort and control. 18 volt compact battery is compatible with 18 volt LXT tools. Provides more run time per charge, reaches full charge in 25 minutes or less and features an integrated L.E.D. battery charge level indicator. Equipped with Star Protection computer controls to protect against overloading, over-discharging and overheating. Rapid Optimum charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. Weighs only 2.7 lbs with battery for reduced operator fatigue. Kit includes: (1) 18 v Vacuum, (1) 18 v Compact Lithium-Ion 2.0Ah battery, (1) 18 v Lithium-Ion rapid optimum charger, (1) extension attachment, (1) floor nozzle, (1) 6" crevice nozzle holder, (1) crevice nozzle, (1) filter, and (1) cloth vacuum filter.
MITERSAW SLIDING COMPOUND 10IN Hitachi C10FCH2 Sliding Compound Corded Miter Saw with Laser Marker Rockwell Shop RK7136.1 Sliding Compound Corded Miter Saw with Leg Stands
Sliding rail system for crosscutting stock up to 12" wide. Make precision miter cut up to 45 degrees left and right. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-tipped blade, hold-down clamp, dust bag, two extension wings, rear support foot bar, blade wrench and two AAA batteries for laser. 4800 rpm. Weighs 40 lbs. Laser marker system for increased cutting accuracy. Horizontal handle, Large table, large extended fence raises to 4" for cutting crown molding vertically. Thumb actuated positive stops for quick miter adjustments. Carbon brush access, allows user to replace brush as needed  Dust collector attachment, to minimize airborne particles. Max work piece capacity is 2-5/16" H, max. by 5-21/32" W. Specs: Single-phase 120VAC 60Hz motor, 0-52 degree miter angle range to the right and left, 0-48 degree bevel angle range to the left with adjustable bevel stops. Includes: 10" tct saw blade, vice assembly with knob bolt, 10mm box wrench, 4mm hex bar wrench. Metal legs attach directly to the saw base. Lightweight, die cast aluminum base for easy transport. Includes adjustable rollers to construct infeed/outfeed support. Depth stops on the rollers allow for unlimited cuts of the same length. Preset detents for setting accurate, repeated miter cuts. Bevel adjusts from 0 to 45 degrees to accommodate most bevel cuts. Includes: dust bag and work clamp.
Dewalt DW713 Single Bevel Compound Corded Miter Saw MK Diamond 157222 Table Corded Tile Saw Makita LS1040 Double Bevel Compound Corded Miter Saw
Two-piece aluminum and Lexan guard design protects against side impact. Lexan allows user to see the blade without the glare, providing a clean line of sight. Base handle design delivers increased comfort and portability to the end user. Positive bevel stops, cam lock miter handle, adjustable stainless detent plate and precise miter system. SPECIFICATIONS: 13 amp motor, 5,000 RPM, negative 3-degree to 48-degree bevel capacity, left and right miter capacity, machined base fence support, tall sliding fence and easy access bevel lock. Versatile and compact tabletop tile with high torque universal motor, high impact thermoplastic water reservoir, safeswitch prevents saw from being operated when locking key is removed. Specs: 120V, 5,500 RPM, blade capacity 7", arbor size 5/8", length of cut 12", depth of cut 2", LxWxH 17" x 14" x 12", weight 15 lbs. Includes: 7" wet cutting diamond blade, water pump, rip guide. Machined aluminum base ensures accurate cuts. Performs compound cutting operations. Dual post compound pivoting arm. Bevel cuts up to 45 degrees to the left. Miter cuts 0-45 degrees left and 0-52 degrees right. Specs: Blade diameters 10", arbor 5/8", max. cutting capacity (bevel/miter) 90 degree/90 degree 2-3/4" x 5-1/8", 45 degree/45 degree 1-3/8" x 3-5/8", no load rpm 4,600, length 18-23/32", weight (lbs.) 24.2. Includes: socket wrench, carbide tipped blade, dust bag and triangular rule.
M-D Building 48191 M-D Fusion Wet Tile Saws Dewalt DW715 Single Bevel Compound Corded Miter Saw Hitachi C12FDH Dual Compound Miter Saw
For cutting a variety of ceramic, porcelain, and stone tile, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, large carrying handles, tilting table allows for miter cuts. Heavy-duty cast aluminum cutting table, drain plug makes for easy water change, adjustable rip guide mounts securely. Secs: Motor: 1 HP, 6.25 Amps. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 18" x 22". Weight: 33lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-1/16".  Use replacement blade 554.2840 Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree to the left and 0-3 degree to the right for increased capacity. 0-50 degree left and right miter capacity for greater versatility. Cam lock miter handle with miter detent override deliver quick, accurate miter angles. 4-hardened steel bevel stops at 0, 33.9, 45 and 48 degrees. Lightweight with built-in carry handle for easy portability. STANDARD EQUIPMENT: Carbide blade, extension kit, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 4,000 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 5-1/4" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat, 6-1/2" horizontal capacity crown molding lying flat, 2 x 8" for 45 degree bevel cut capacity (dimensional lumber), 2 x 8" for 90 degree cross-cut capacity (dimensional lumber), 2 x 8" max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6 dimensional lumber max width for 45 degree miter cut capacity, 42 lbs. tool weight. Stand Not Included. Laser marker system accurately indicates where the blade will cut on the material and can be easily adjusted to the right or the left of the cut mark depending upon the user preference. Powerful 15 amp motor with 1,950 watts of output power smoothly powers through hardwoods with ease. Elastomer compound coats the horizontal handle, reducing vibration, while adding comfort and preventing slippage. Tall, pivoting aluminum fence that stands at a height of 5-1/8" allows crown molding to be cut vertically for convenience. Large base provides better support and balance to prevent material from warping. Externally accessible carbon brushes allow for quick and easy maintenance to prolong tool life. Miter scale ranges from 0-52 degrees, both to the right and left, for a broader range of cuts. Miter angles can be quickly adjusted using Hitachi's thumb actuated positive stops. Bevel scale ranges from 0-48 degrees to the right and left allowing the material to stay in place while the saw head flips to make opposing cuts. After major bevel angle is secured, micro-bevel adjustment knob can be used to dial-in to a precise angle without the weight of the saw head compromising the accuracy. Weighs 46.3 lbs.
QEP 83200 Corded Bridge Saw Hitachi C8FSE Single Bevel Sliding Compound Corded Miter Saw Dewalt DW716 Double Bevel Compound Corded Miter Saw
Use to cut marble, granite, porcelain, stone and tile. Dual internal water delivery system for maximum dispersion. Adjustable pivoting rail allows easy angle positioning from 90? to 45?. Angle/rip guide for consistent cuts. Automatic thermal overload protection prevents saw from overheating. Child-proof, locking on/off switch and key for safety. Power cords are encapsulated in a protective tube and attached to a flexible rod; keeps the cutting table safe and clear. Specs: motor: 1 HP, 120V-60Hz/9.5 Amps, 1100 watts, rpm: 3420 rpm, 8" blade capacity, 5/8" arbor, rip cuts 24" tile, diagonal cut on 18" tile, depth of cut: 1-3/8", dimensions: 37" L x 18" W x 47-1/2" H (w/legs), weight 82.32 lbs ( w/legs). Includes: transport handle and fold-out stand with wheels, 8" porcelain rated continuous rim wet diamond blade, high volume water pump and angle/rip cutting guide. Electronic speed control, positive miter stops for quick adjustments, adjustable pivot fence, splinter guard, externally replaceable carbon brushes, dust collector attachment, precise compound cuts, easy-to-read measurements and quick settings, Linear ball bearing slide system, vertical handle with elastomer grip. Specs: 5,500 RPM, 8-1/2" blade diameter, 5/8" arbor size, bevel angle range: (Right) 0-5 degrees, (Left) 0-48 degrees, miter angle range: (Right) 0-57 degrees, (Left) 0-45 degrees, miter detent stops: (R & L) 15, 22.5, 31.6, 45, degrees, cross cut capacity (90 degrees) 2-9/16"x12", size 21-27/32"Wx31-3/32"Lx19-3/32"H, weighs 31 lbs. Includes: 8-1/2" TCT saw blade, dust bag, vice assembly, box wrench, sub fence. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree with positive stops at 0, 33.9, 45 and 48 degree both left and right allowing user to flip the saw not the material. Back fence design delivers ability to cut 2 x 10" dimensional lumber at 90 degrees and 2 x 8" at 45 degrees. Precise miter system and machined base fence support, innovative gearbox and belt-drive design for increased cutting capacity. Lightweight, head lock-down pine and built-in carrying handle. Cam lock miter handle with detent override. Designed for use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path. STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 3,600 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat (10" with back fence), 6-1/2" horizontal capacity crown molding lying flat,  2 x 8" (2 x 10" with back fence) left and right for 45 degree bevel cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) for 90 degree cross-cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6" (2 x 8" with back fence)  dimensional lumber max width for 45 degree miter cut capacity. 44 lbs. tool weight. Stand Not Included.
SAW MITER SLIDE COMPOUND 10IN SAW MITER W/BATT W/CHARGER 20V MK Diamond 160028 Corded Tile Saw
15 AMP motor tackles tough cutting jobs with ease. Zero rear clearance slide system. Ergonomic upfront bevel lock for quick and easy adjustments of bevel angles. Tool-less, adjustable laser marker for cutting accuracy. Positive stops with miter detent override for faster transitions between miter angles. Equipped with LED light for added visibility. 0-60 degree miter angle to the right and 0-55 degree miter angle to the left, 0-48 degree bevel angle range to the right and left. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 13 mm wrench, and vice assembly. SPECIFICATIONS: 15 AMP belt driven motor, pivoting fence, no-load speed of 3,200 RPM. Utilizes 20 volt Max Battery pack which provides on average, 183 cuts of 2x4 pine or 275 cuts of 3-1/4 pine baseboard. Integrated XPS cross system provides adjustment free cut line indication for better accuracy and visibility. Capacity to cut up to 3-5/8" nested crown and 3-1/2 base vertically. Will cut 2x8 lying flat. Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Oversized bevel scale makes bevel angle adjustments accurate and easy. Compact, lightweight design (31.6 lbs) allows for easy transport and storage. Cam lock miter handle delivers quick and accurate miter angles. Precise miter system and machined base fence support optimized durability and cutting accuracy. 7-1/4" blade diameter. No load speed: 3750 rpm. Includes battery, charger, carbide blade, user's guide, blade wrench and material clamp. Wet cutting tile saw. High torque, universal motor. Runs on standard house current and draws only 5 amps at 120 volts. Engineered for cutting ceramic, travertine and slate. MK Safe-switch prevents saw from being operated when locking key is removed. Chrome guide-bar and linear bearing assembly ensures accurate tracking and alignment. Single piece zinc-plated steel frame for rigidity, strength and durability. Hinged blade guard for easy blade changes. Fully submersible, thermally protected water pump. High impact removable thermoplastic water reservoir will not rust or bend out shape. 7" blade capacity. Includes 7" diamond blade, water pump, wrenches and rip guide. Depth of cut 2"; length of cut 18"; diagonally cuts 13" tile. Dimensions of saw: 33"L x 18-1/2"W x 12-5/8"H.
MK Diamond 159943 Corded Tile Saw Makita LS1018 Dual Slide Compound Miter Saw SAW MITER SLDNG COMPOUND 12IN
The powerful 7.4 amp, high-torque motor has maintenance-free, self-lubricating pinion and gear-box assembly. Tilting head allows for precise 45 degree miter cuts and variable height cutting head allows for plunge cutting. Sliding aluminum die-cast cutting table rips 18" tile and diagonally cuts 13" tiles. Linear bearing and chrome plated guide-bar assembly ensure precise cutting. The frame is single piece zinc-plated steel for rigidity, strength and durability. Hinged blade guard allows for easy blade changes. Motor incorporates the heavy duty on/off MK-Safeswitch and a built-in water pump receptacle. Removable thermoplastic water reservoir, 7" diamond blade, submersible water pump and rip guide are all included. Weight 33 pounds. Dimensions: 33" long x 19" wide x 20" high. CSA approved. Large cutting capacity in a compact design and less weight at only 43.7 lbs. for job site portability. Powerful 13.0 amp direct drive motor requires less maintenance and delivers 4,300 rpm. Cuts up to 12" at 90 degrees and 8-1/2" at 45 degrees. Linear ball bearing system engineered to deliver "dead-on" accurate cuts. Rear handle bevel lock is easily accessible and adjusts 0-45 degrees (left and right) with positive stops at 0 degrees, 45 degrees (left and right).  Soft start feature for smooth start-ups. Ergonomic rubberized D-handle design for better fit and added comfort. Large precision machined aluminum base supports material for more efficient cutting. Electric brake for maximum productivity. See-thru blade guard system for greater visibility of blade and line of cut. Oversized trigger switch for better fit, added comfort and easier operation. Includes extension wings for supporting long work pieces. Ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general contractors and more. Includes: (1) 10" 40T Miter saw blade, (1) triangle rule for miter saws, (1) vice assembly, (1) dust bag assembly, (1) extension wing and (1) wrench 13mm. Features adjustable laser line for accurate and easy cutting. Zero clearance slide structure keeps width of tool 890 mm at any stroke of saw head. Thumb actuated positive miter stops for quick and easy adjustment. Soft grip handle reducing vibration to end user. Sliding sub fences on right and left for support of large stock. Equipped with blade guard for increased user safety. 0-45 degree bevel angle range to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place. Light in weight for easy transportation and maneuverability. High performance dust collection. Compact slide system allows the saw head to slide along fixed rails, eliminating the need for rear clearance.
SAW MITRE DUAL BEVEL 12IN 120V Dewalt DW717 Double Bevel Sliding Compound Corded Miter Saw SAW MITER SLDG CMPD W/LSR 10IN
The DHS716 12" (305mm) 120 volt Max Compound Miter Saw with top handle delivers power and cutting capacity with the portability and convenience of a cordless tool. Flexible power for corded or cordless use. CutLine Blade positioning system delivers adjustment free cutline indicator. Includes the 12" Compound Miter Saw, blade, blade changing wrench, dust bag and a  120 volt AC adapter (Batteries And Dual Port Fast Charger Sold Separately). 45 degree bevel cut capacity; 45 degree miter cut capacity; 90 degree cross-cut capacity. Arbor size: 5/8" (1") IN. Weighs only 44 lbs. Cross cut positive stop for optimal cutting position. XPS Laser Compatible. Tall sliding fence for optimized material support. Bevel detent system with 7 hard stops gives you accurate, repeatable cuts. Adjustable stainless steel miter plate. Cam lock miter system. Sliding fence that supports up to 6" base molding to the left of the blade & up to 3 1/2" to the right of the blade. Machined base fence insures blade perpendicularity to fence. SPECIFICATIONS: Blade Diameter: 10"; Bevel Capacity: 0 degrees - 48 degrees; Miter Capacity: 60 Degrees left, 51 degrees right; Crosscut Capacity at 0 degrees: 2" x 14"; Crosscut Capacity at 45 degrees: 2" x 12"; Vertical Capacity: 6" base molding, 6-1/4" crown molding; Amps: 15 amps; Net Weight: 51 lbs. Stand Not Included. Large cutting capacity in a compact design with less weight at only 57.9 lbs. Powerful 15.0 amp direct drive motor requires less maintenance and delivers 3,200 rpm. Large-sized aluminum base improves stability of material for efficient cutting. Unique 2-steel rail sliding system offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (5-1/4?), crown molding (6-5/8? nested), and crosscut a 4" x12" at 90 degrees. The saw miters 0 to 60 degrees left and right, with positive stops at 0, 15, 22.5, 31.6, 45 and 60 degrees (left or right). The bevel lock allows for easy access and quick adjustments from 0 to 48 degrees (left and right). Includes: (1) 10" x 5/8?60T Micro-polished Miter saw blade, (1) triangle rule, (1) vertical vice, (1) dust bag, (1) Hex wrench.
Hitachi C10FSBP4 Double Bevel Sliding Compound Corded Miter Saw TILE SAW 800W                 Hitachi C10FSHPS Double Bevel Sliding Compound Corded Miter Saw
TILE SAW 800W
Our Price: $597.18
Positive angle stoppers for easy adjustment of teeth, turn table position for miter cutting (at the right and left of the 0-degree center setting, at 15,22.5, 31.6 and 45-degree settings). High sub fence. Legibly labeled angle scale and bevel scale. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for smooth, accurate cutting, fine surface finish and low noise operation. Poly V-belt and motor driving system for longer service life. STANDARD EQUIPMENT: 1 each: Vise Assembly, dust bag, 10mm box wrench, 255mm (10") TCT saw blade. SPECIFICATIONS: 10" diameter, 120V, 12 Amp, 1,400W max. output, 3,800 RPM, soft start and speed control. Max cutting capacities: 0-degree (right angle), miter cut 45-degree (left/right), miter right 57-degree, bevel cut 45-degree (left), bevel cut 45-degree (right), miter left/right 45-degree plus bevel left 45-degree, miter right 45-degree plus bevel right 45-degree. Miter cutting range: 0-45 degree left, 0-57 degree right. Bevel cutting range: 0-45 right and left. 20-3/4W x 41-1/2"L x 24-1/4"H. 43 lbs. tool weight. Light-weight and compact saw for high performance cutting. Heavy-duty table with measuring guide. Angle guide plate holds the work piece at various angles. Easily-adjustable cutting guide remains parallel at all times. Easy mounting water tray. Quick-release, tool-free table mount release for easy cleaning and blade replacement. Specs: 120 volt single phase electric motor, 800 watts, arbor 1", max cutting depth 1-7/8", max cutting depth at 45 degrees - 1-7/16", weighs 34 lbs. Includes: parallel cutting guide, angle guide plate, M8 and M19 combination wrench. 12 AMP belt driven motor with soft start and overload protection. Adjustable laser guide for precise cutting. Soft Start feature reduces noise and recoil during start-up. Electronic speed control keeps RPMs constant as load varies. Linear ball bearing slide system for precision and durability. Left and right positive stops on miter gauge located at 0, 15, 22.5, 31.6, and 45 degrees. Dust collection system collects 100% more dust than previous models. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 10 mm box wrench, and vice assembly. SPECIFICATIONS: 12 AMP belt driven motor, pivoting fence, no-load speed of 3,800 RPM.
MITER SAW KIT 10IN M18 9.0BATT Dewalt DWS780 Double Bevel Sliding Compound Corded Miter Saw SAW MITER SLIDING 12IN 120V
Milwaukee Powerstate brushless motor provides more corded cutting performance, power, more  run-time and longer life. Dual Bevel with 9 detents and easy access bevel lever. Top and side carrying handles for maximum portability. Detent override for easily setting miter locations outside of detents. The RedLink Plus Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection and productivity. Easy access to change blade. Durable RedLithium battery pack delivers more run-time, power and longer battery life with up to 400 cuts per charge. Maximum miter capacity 50/60. Includes: M18 Fuel Dual Bevel Sliding Compound Miter saw, (1) M18 RedLithium High Demand 9.0 battery pack, (1) M18 and M12 Rapid charger, (1) Blade Wrench, (1) Carbide Tipped Blade, (1) Clamp and (1) Dust bag. Adjustable stainless steel miter detent plate with 10-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. Single lever action double bevel design allows saw to easily bevel left and right 0-48 degree with positive stops at 0, 22.5, 33.9 and 45 degree in both directions permitting user to flip the saw and not the material. Back fence design delivers ability to cut 2 x 16" dimensional lumber at 90 degrees and 2 x 12" at 45 degrees. Precise miter system and machined base fence support deliver increased cutting accuracy. Innovative gearbox and belt-drive design for increased vertical cutting capacity. Miters 60 degrees to the left and 50 degrees to the right. Dual horizontal steel rails with clamping mechanism and linear ball bearings. Camlock miter handle with detent override. Compact and lightweight design for quick, easy transport and storage. For use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path.  STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15 amps, 3,800 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 16" horizontal capacity baseboard lying flat, 11-1/4" horizontal capacity crown molding lying flat,  2 x 14" (2 x 16" with back fence) 45-degree bevel cut capacity (dimensional lumber),  2 x 14" (2 x 16" with back fence) for 90-degree cross-cut capacity (dimensional lumber),  16" for 90-degree cross-cut capacity (max width), 2 x 12" max width for 45-degree miter-cut capacity (max height), 2 x 12" for 45-degree miter-cut capacity (max width). 53 lbs. tool weight. Stand Not Included. 120 volt Max Double Bevel Sliding Compound Miter Saw with CutLine delivers capacity, accuracy, power, ease of use and the durability of a corded tool with the portability and convenience of a cordless tool. CutLine blade positioning system delivers accurate line of sight to be cut. Includes the 120 volt AC adaptor. (60 Volt Max Lithium Ion Batteries And Fast Charger Sold Separately).
SAW MITER COMPOUND 12IN BRSHLS Milwaukee 6955-20 Double Bevel Sliding Compound Corded Miter Saw Dewalt D24000 Professional Corded Tile Saw
The 12" (305mm) 120V max compound miter saw delivers the power and cutting capacity that end users have come to expect from Dewalt corded miter saws with the portability and convenience of a cordless. Run time up to 289 cross cuts in baseboard along with the best in class vertical capacity against sliding fence. Tool height 26"; Tool length 32"; Tool weight 44 lbs. No load speed 3,800 rpm. Kit includes: (1) 12" (305mm) Compound miter saw, (1) Dual port fast charger, (1) blade, (1) 120V AC adapter, (2) 60V Max Lithium Ion batteries, (1) blade change wrench and (1) dust bag. The Miter Angle Digital Readout provides repeatable accuracy to 0.1 degree. Miter Angle Fine Adjust with Detent Override makes it simple to dial in precise miter angles. Dual Integral Jobsite Lights fully illuminate the work piece and cut line from either side of the blade. The powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start maintains constant cutting speed under load and decreases start up head movement. The Integral Dust channel captures up to 75 percent of the dust and debris cut. SPECIFICATIONS: Amps:  15.0; No Load Speed:  3,200 RPM; Blade Diameter:  12"; Arbor Size:  5/8" or 1"; Miter Range:  55 degrees  Left to 60 degrees  Right; Bevel Range:  48 degrees  Left to 48 degrees  Right; Miter Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 55 degrees; Right-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 60 degrees; Bevel Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees  Right-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees. Tool Weight  65 lbs. INCLUDES: Carbide Tipped Blade; Dust Bag; Blade Wrench. Integrated cantilevering rail/cart system allows for 24" ripping capacity, 18" tile on diagonal, stainless steel rail system is integrated into the saw frame, integrated 45/22.5 degree miter feature for quick angled cuts, plunge feature, adjustable dual water nozzles, rear and side water attachments help contain water run-off and blade spray, removable cutting cart for easy cleaning, 5 gallon water pan, edge guide with 2-position,45/90, degree guide, will cut hard materials such as porcelain and stone. Specs: 15.0Amps, blade diameter 10", max rip capacity 24" tile, diagonal cut capacity 18" tile, max depth of cut 3-1/8", pan material, ABS plastic, removable water containment tray, 34"Lx26"W(housing only), weight 69 lbs.
SAW SLIDNG MITER 12IN BRSHLS  Diamond Products 65020 Corded Tile Saw
This double bevel sliding compound miter saw offers flexible power options; corded for unlimited run time or cordless for portability powered by Dewalt brushless motor technology. Accuracy is delivered through adjustable miter scale with 11 positive stops and visibility bevel scale the CutLine blade positioning system. Up to 289 cross cuts in 3-1/4" base molding. Compact design weighs only 56 lbs. Includes: (1) DHS 790 Miter saw, (1) Dual port fast charger, (2) 60 volt Max Lithium Ion batteries, (1) blade wrench, (1) 12" blade, (1) DCA 120 volt Max corded power supply and (1) dust bag. Portable, light weight, with easy clean water tray and liquid cooled bearing housing, blade guard includes brush for additional blade cooling protection and overspray. Solid steel frame with convenient carrying handles. Specs: 15amp/115V, rip cut up to 20", diagonal cut to 14", up to 10" blade capacity  with 5/8" arbor, dimensions 39"Lx24"Wx24"H, weighs 43 lbs. Includes: 10" blade, water pump and 45 degree and 90 degree rip guide/miter block.
   
 
1