Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > WELDING SUPPLIES > WIREBRUSHES AND CLEANERS
Sort By:
1
MINI WELDERS SS BRUSH         MINI WELDERS NYLON BRUSH      MINI WELDERS BRASS BRUSH
7-1/4" Polypropylene handle; Made in the U.S.A. 7-1/4" Polypropylene handle; Made in the U.S.A. 7-1/4" Polypropylene handle; Made in the U.S.A.
BRSH WIRE 8-1/2IN MTL         BRUSH WIRE BRASS 7-3/4X3/8IN  GLASSES SAFETY VISITORS CLEAR
Tube brush with wire loop-end handle. Single stem/single spiral with .005" (.127mm) nylon bristles. Ideal for cleaning bottles, carburetors, brake cylinders, radiator hoses, engine blocks, blocked hoses, drains, etc. Strong and durable with solidly imbedded bristles. Will not rust. Long wood handle with pre-drilled hang hole. Ideal for general purpose cleaning and excellent for cleaning stainless steel. Features .006" (.15mm) brass wire in 3 x 7 rows. Features high impact scratch resistant polycarbonate lenses and non-slip temples. Provides 99.9% UV protection. Meets ANSI Z87.1+safety standards.
BRUSH WIRE SS/NYLON 7-1/4X.006 BRUSH WIRE BRASS 7.25X.006IN  BRUSH WIRE SS/WD 8-5/8X.006IN
Small, strong and durable with solidly imbedded bristles; 7-1/4" (184.1mm) long plastic handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Features .006" (.15mm) wire in 3 x 7 rows. Small, strong and durable with solidly imbedded bristles; 7-1/4" (184.1mm) long plastic handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Features .006" (.15mm) wire in 3 x 7 rows. Strong and durable with solidly imbedded stainless steel (SS) bristles. Long curved wood handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Angled head design eliminates cut and bruised knuckles. Features .006" (.15mm) diameter.
BRUSH TUBE NYLON/WIRE .75X8.5 BRUSH TUBE NYLON 1.25INX15.5IN BRUSH WIRE 3X7IN WOODEN HNDL
Tube brush with wire loop-end handle. Single stem/single spiral with .005" (.127mm) nylon bristles. Ideal for cleaning bottles, carburetors, brake cylinders, radiator hoses, engine blocks, blocked hoses, drains, etc. Tube brush with wire loop-end handle. Single stem/single spiral with .005" (.127mm) nylon bristles. Ideal for cleaning bottles, carburetors, brake cylinders, radiator hoses, engine blocks, blocked hoses, drains, etc. Strong and durable with solidly imbedded bristles. Will not rust. Long wood handle with pre-drilled hang hole. Ideal for general purpose cleaning and excellent for cleaning stainless steel. Features .006" (.15mm) brass wire in 3 x 7 rows.
BRUSH WIRE BRASS 8-5/8X1/2IN  BRUSH WIRE CRVD 13-3/4X.014IN BRUSH WIRE STEEL 10-1/4X.014IN
Strong and durable with solidly imbedded brass bristles. Will not rust. Long curved wood handle with pre-drilled hang hole. Ideal for general purpose cleaning and excellent for finish or delicate cleaning of stainless or polished steel. Angle head design eliminates cut or bruised knuckles. Features .006" (.15mm) brass wire in 2 x 9 rows. Strong and durable with solidly imbedded carbon steel (CS) bristles. Curved wood handle with pre-drilled hang hole. Ideal for aggressive cleaning and removing rust and paint from most surfaces. Angled head design eliminates cut and bruised knuckles. Feature .014" (.36mm) CS wire. Strong and durable with solidly imbedded carbon steel (CS) bristles. Curved wood handle with pre-drilled hang hole. Ideal for aggressive cleaning and removing rust and paint from most surfaces. Angled head design eliminates cut and bruised knuckles. Feature .014" (.36mm) CS wire.
BRUSH BRASS SCRATCH SHOE HNDL JIG WELDING MAGNETIC LIFT 25LB BRUSH WIRE STL 13-11/16X.014IN
Strong and durable, solidly imbedded brass bristles, with pre-drilled hang hole. Will not rust. Ideal for general purpose cleaning and excellent for cleaning stainless steel. Features .012" (.33mm) brass wire in 4 x 16 rows. Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks. Strong and durable with solidly imbedded carbon steel (CS) bristles. Long curved wood handle with pre-drilled hang hole. Ideal for aggressive cleaning and removing rust and paint from most surfaces. Angled head design eliminates cut and bruised knuckles. Features .014" (.36mm) diameter. Includes metal scraper.
GLASSES SAFETY CLEAR/PINK     BRUSH WIRE WDN 10-1/2IN       BRUSH WIRE STEEL 10-1/4X.014IN
Specifically designed to fit smaller, narrower faces. These include a deep temple design that provides good side impact protection. The clear lens is best used indoors or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Durable, with a polypropylene handle and bristles. Resistant to most auto parts cleaning solutions. One-piece unitized brush vulcanized in rubber. Metal ferrule for more support and durability plus a slightly heavier fill. Use to clean motors, machinery and metal parts. Good for removing gasket material or baked-on varnish. Strong and durable with solidly imbedded carbon steel (CS) bristles. Long curved wood handle with pre-drilled hang hole. Ideal for aggressive cleaning and removing rust and paint from most surfaces. Angled head design eliminates cut and bruised knuckles. Features .014" (.36mm) diameter. Includes metal scraper.
BRUSH WIRE SS/WD 13-3/4X.013IN BRUSH BRASS SCRATCH WD HANDLE BRUSH WIRE SS/WD 10-1/4X.013IN
Strong and durable with solidly imbedded stainless steel (SS) bristles. Long curved wood handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Angled head design eliminates cut and bruised knuckles. Features .006" (.15mm) diameter. Strong and durable, solidly imbedded brass bristles, with pre-drilled hang hole. Will not rust. Ideal for general purpose cleaning and excellent for cleaning stainless steel. Features .012" (.33mm) brass wire in 3 x 19 rows. Strong and durable with solidly imbedded stainless steel (SS) bristles. Long curved wood handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Angled head design eliminates cut and bruised knuckles. Features .006" (.15mm) diameter.
BRUSH STEEL V-GROOVE WD HNDL  TIP CNTCT 0.030IN 4/PK        TIP CNTCT 0.035IN 4/PK
For cleaning tight hard-to-reach areas such as tee welds, concrete, driveway joints, auto body seams, removing paint in corners, etc. With pre-drilled hang hole and .014" (.36mm) carbon steel wire in 3 x 19 rows. MIG contact tips are compatible with "Forney" (00306 and 00308), "Tweco", "Binzel" or "Clarke" MIG guns. It is precision machined. 4-pack. MIG contact tips are compatible with "Forney" (00306 and 00308), "Tweco", "Binzel" or "Clarke" MIG guns. It is precision machined. 4-pack.
TIP CNTCT 0.045IN 4/PK        TIP CONTACT MIG REPLACE .023IN TIP CONTACT MIG .024/.025IN
MIG contact tips are compatible with "Forney" (00306 and 00308), "Tweco", "Binzel" or "Clarke" MIG guns. It is precision machined. 4-pack. MIG contact tips are compatible with "Forney" (00306 and 00308), "Tweco", "Binzel" or "Clarke" MIG guns. It is precision machined. 4-pack. Replacement MIG contact tip for "Hobart Handler" 135, 140 ("Forney" 00355), 175 and 187 ("Forney" 00356) and "Ironman 210" ("Forney" 00362) and 250 ("Forney 00361). 3-pack.
TIP CNTCT 0.03IN HOBART/MILLER TIPCNTCT 0.035IN HOBART/MILLER TIP CNTCT 0.03IN HOBART/MILLER
Replacement MIG contact tip for "Hobart Handler" 135, 140 ("Forney" 00355), 175 and 187 ("Forney" 00356) and "Ironman 210" ("Forney" 00362) and 250 ("Forney 00361). 3-pack. Replacement MIG contact tip for "Hobart Handler" 135, 140 ("Forney" 00355), 175 and 187 ("Forney" 00356) and "Ironman 210" ("Forney" 00362) and 250 ("Forney 00361). 3-pack. For Hobart, Handler 135, 140 (Forney 00355), 175 and 187 (Forney 00356), and Ironman 210 (Forney 00362) and 250 (Forney 00361). 3-pack.
CLNR TIP SZ KING STANDARD     CLNR TIP SZ KING XLG          SHIELD FACE CLEAR REPL15.5X8IN
Tip cleaner kit provides as many as 60 or more cleaning edges per inch of cleaner. Fits all tip sizes. Light and easy to use. Contains 11 sizes - 6 through 26. Aluminum case includes dressing tool. Tip cleaner kit provides as many as 60 or more cleaning edges per inch of cleaner. Fits all tip sizes. Light and easy to use. Contains 11 sizes - 6 through 26. Aluminum case includes dressing tool. Replacement clear grinding shield for "Forney" 58600 (sku # 891.0275) and 58605 grinding shield assemblies. Meets ANSI Z87.1 safety standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING.
GLASSES SAFETY BLUE MIRROR    BRUSH STAINLESS STEEL V-GROOVE FACE SHIELD GREEN UNIV8X15-1/2
Sleek and compact; weighs less than one ounce; offers serious all-day comfort with a stylish look and extreme durability; independently certified; provides 99.9% UV protection; meets ANSI Z87.1+ safety standards. For cleaning tight hard-to-reach areas in cook-out grills, dairy operations, restaurants, boats and areas where humidity is a problem. Ideal for cleaning most aluminum. Features pre-drilled hang hole and .014" (.36mm) stainless steel wire in 3 x 19 rows. 15-1/2" (393.7mm) x 8" (203.2mm) replacement green grinding shield for Forney 58604 and 58606 grinding shield assemblies. Meets ANSI Z87.1 Safety Standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING.
STORAGE ROD RED 10LBS 14-3/8IN SPRY ANTI-SPLATTER 13OZ       GEL WELDING NOZZLE16OZ NO SILI
Made of high impact polypropylene plastic. Includes four (4) internal compartments to separate rod. Screw-type cap and rubber o-ring provide clean, dry, air-tight storage for electrodes. Store up to 10 Lbs. Prevents weld spatter from adhering to MIG nozzles, contact tips, weld area and work surface. Eliminates erratic operation with a film that will not clog orifices and threads on MIG nozzles and contact tips. Suitable for use on fixtures of semi- and automatic welders. Odorless, non-flammable, non-toxic and silicone free, it will not cause porosity.
PICK SET REPAIR 4-WAY 4-PIECE GLASSES SAFETY GRAY/GRAY FLEX MGNT ALL PUR 6-1/4IN 1/PK
A general purpose repair kit containing (1) each easy-pick hook (o-ring remover), easy-pick 90 degree scribe, easy-pick double scribe and easy-pick straight scribe. Features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks.
GOGGLES OXY/ACET NUM 5SHD 50MM GLASSES SAFETY CLR/BLK FLEX   GLASSES SAFETY CLR/PINK FLEX
Features two separate 50mm round #5 shaded hardened eye-pieces. Equipped with cover lenses. Folds up to pocket size for storage and carrying. Meets ANSI Z87.1 safety standards. "Forney" 56900 (shaded) and 56901 (clear) replacement 50mm eye-pieces are available separately. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY. Includes patented flex temple technology designed to relieve pressure on the ear while providing excellent stability and comfort. Additional features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. The clear lens is best used indoors or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Include patented temple technology designed to relieve pressure on the ear while providing excellent stability and comfort. Additional features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. These clear lenses are best used for indoor/outdoor use or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
JIG SUPPORT MAG LRG 45/90/135 GLASSES SAFETY CLR/BLK FLEX   GLASSES SAFETY BLUEMIRROR/BLUE
Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks. Include patented temple technology designed to relieve pressure on the ear while providing excellent stability and comfort. Additional features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. These clear lenses are best used for indoor/outdoor use or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
GLASSES SAFETY CLR/GRAY FRAME WLDG GOGGLES CYCLOPS UNIV     PLIERS LOCKING 4-PRONG 8-3/8IN
Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Featuring 2" (50.8mm) x 4-1/4" (107.95mm) #5 shade hardened lens with clear glass cover lens. Meets ANSI Z87.1 safety standards. Conforms comfortably to the head and allows ample room to fit over regular eye glasses. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY. 8-3/8" (212.8mm) long with 2" (50.8mm) maximum jaw opening and 2-1/2" - 3" (63.5mm - 76.2mm) depth. Designed to grip a few inches from the end of the metal. Allows weld to start or finish at the end of the joint. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING.
GLASSES SAFETY GRAY/BLK FRAME GLASSES SAFETY BLUE MIRROR/BLK GLASSES SAFETY CLR/CAMO FRAME
Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards.
GLASSES SAFETY GRAY/CAMO FRAME GLASSES SAFETY AMBER/CAMO FRM GLASSES SAFETY BRNZ/CAMO FRAME
Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards. Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards. Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards.
PLIERS LOCKING CCLAMP 10-1/2IN GLASSES/GOGGLE SAFETY CLEAR   DRILL TIP SET HI CARBON STL 12
10-1/2" (266.7mm) long with 3-3/4" (95.3mm) maximum opening and 3" (76.2mm) depth. Extra clamping capacity for large objects. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING. Clear lens and anti-fog coating. Includes temple and head straps which allow an individual to swap between safety glasses and goggles. Soft foam lining around the frame which block out debris. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards. Twelve (12) high carbon steel tip drills stored in a barrel. Sizes #52 through 74 within a pencil compatible design. Includes pocket clip. Used to clean and true most standard orifices of acetylene welding and cutting tips. Use "Forney" 86139 for replacement cleaning drills.    
PLIERS MIG 7 IN 1 INSULATED   GOGGLES WELDING FLIP 2X4-1/4IN SHIELD FACE CLEAR LIGHTWEIGHT
These MIG pliers includes seven features for MIG welding applications. The features include: (1) Needle nose pliers grip for pulling, (2) Small serrated hole for MIG tips, (3) Flat surfaces for hammering, (4) Cutter to trim MIG wire, (5) large serrated hole for nozzle, (6) Spring loaded handle and (7) Heavy insulated comfort grip. Featuring 2" (50.8mm) x 4-1/4" (107.95mm) #5 shade hardened lens with clear glass cover lens. Meets ANSI Z87.1 safety standards. Conforms comfortably to the head and allows ample room to fit over regular eye glasses. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY. Complete assembly with pin-type headgear and 15-1/2" (393.7mm) x 8" (203.2mm) clear grinding shield. Lightweight design for maximum comfort. Tough non-warping red polyethylene visor. Meets ANSI Z87.1 safety standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING. "Forney" 58602 (sku # 891.0283) is replacement clear shield.
C-CLAMP LOCKING JAWPAW10-1/2IN COUPLER AB BRASS OXY/ACETYLENE FACE SHIELD CLEAR GRINDING
10-1/2" (266.7mm) long with 3-3/4" (95.3mm) maximum opening and 3" (76.2mm) depth. Extra clamping capacity for large objects. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING. Use to connect "A" size fittings to "B" size fittings. Complete assembly with ratcheting-type headgear and 15-1/2" (393.7mm) x 8" (203.2mm) grinding shield. Lightweight design for maximum comfort. Tough non-warping polyethylene visor. Meets ANSI Z87.1 Safety Standards. Forney 58608 is replacement ratcheting-type headgear. Forney 58602 is replacement clear shield. NOT TO BE USED FOR OXY-ACETYLENE WELDING.
Irwin 25 Welding Clamp GUIDE PIPE CUTTING 2-3/8TC 4-1 GUIDE PIPE CUTTING 2-7/8TC 4-1
For use in welding applications or for holding awkward shapes in place. U- shaped jaws provide enhanced visibility and more working space. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Throat depth 1-3/4", Jaw capacity 1-5/8"; Jaw depth 1-3/4". Made from high grade steel so it's reusable. Four different cuts from each guide: Saddle cut, 45 degree, 22-1/2 degree and 90 degree. Includes a spring loaded hinge. Painted red. Made from high grade steel so it's reusable. Four different cuts from each guide: Saddle cut, 45 degree, 22-1/2 degree and 90 degree. Includes a spring loaded hinge. Painted red.
HOSE OXY/ACET 1/4X25FT R-GRADE HOSE OXT/ACET 1/4X50FT R-GRADE HOSE OXY/ACETYLENE 1/4INX25FT
Suitable for use with oxygen-acetylene only. Red hose for acetylene. Green hose for oxygen. use with acetylene fuel gas only. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 minutes. Couple with one inch ferrules only. Includes standard "B" fittings. Suitable for use with oxygen-acetylene only. Red hose for acetylene. Green hose for oxygen. use with acetylene fuel gas only. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 minutes. Couple with one inch ferrules only. Includes standard "B" fittings. Suitable for use with propane, propylene and MAPP gas. Features neoprene coating inside and out to resist corrosion from oil and petroleum-based fuel gases. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 minutes. Couple with one inch ferrules only. Includes standard "B" fittings.
WHEEL/HANDLE KIT-313/314WELDRS HOSE OXY/ACETYLENE 1/4INX50FT CART WELDER PTBL 11.5X27.5 BLK
Wheel and handle kit for "Forney" 00313 & 00314 ARC Welders (sku #: 890.9400). Suitable for use with propane, propylene and MAPP gas. Features neoprene coating inside and out to resist corrosion from oil and petroleum-based fuel gases. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 minutes. Couple with one inch ferrules only. Includes standard "B" fittings. Fits "Forney" 300 series welders and plasma cutters and all similar sized welders. 11-1/2" wide x 27-1/2" tall. 3-levels. Four casters included. 1.0mm thick steel. Max recommended weight capacity: 90 lbs (40.8 Kg).
   
 
1