Home > POWER TOOLS & ACC > INDUSTRIAL GRADE FASTENERS > SOCKET HEAD BITS
Choose a sub category:
AUTOMOTIVE BELT ACCESSORIES CLAMPS & HANGERS COMPRESSORS/INFLATORS
COMPRESSORS/INFLATORS COMPRESSORS/INFLATORS
Sort By:
1 2 3 4
Alumaseal ASBPI12 Radiator Sealer Perm-O-Seal DS114 Stop Leak APEX FASTENERS 185-2X Bit 1/4 Hex Drive Insert # 1/8
Stops leaks safely, quickly, and easily. Compatible with all antifreeze and coolants. Safe for all metal, plastic, and rubber cooling system parts. On a card. Mixture of seven organic ingredients designed to permanently seal holes and cracks in radiators, water jackets, and cylinder heads. Just pour into the radiator while the engine is running, it seeks out holes, and swells shut as soon as it comes in contact with air. Will not re-dissolve, and draining or flushing will not affect the seal. On a card. Bit 1/4 Hex Drive Insert # 1/8
APEX FASTENERS 185-3X Bit 1/4 Hex Drive Insert # 5/32 APEX FASTENERS 185-4X Bit 1/4 Hex Drive Insert # 3/16 APEX FASTENERS 185-10X Bit 1/4 Hex Drive Insert # 9/64
Bit 1/4 Hex Drive Insert # 5/32 Bit 1/4 Hex Drive Insert # 3/16 Bit 1/4 Hex Drive Insert # 9/64
APEX FASTENERS 185-1X Bit 1/4 Hex Drive Insert # 3/32 STOP LEAK RADIATOR            APEX FASTENERS 185-3MM Bit 1/4 Hex Drive Insert # 3mm
Bit 1/4 Hex Drive Insert # 3/32 Seals even large leaks without interfering with the flow through the radiator and heater core tubes. Bit 1/4 Hex Drive Insert # 3mm
APEX FASTENERS 185-4MM Bit 1/4 Hex Drive Insert # 4mm APEX FASTENERS 185-5MM Bit 1/4 Hex Drive Insert # 5mm APEX FASTENERS 185-9X Bit 1/4 Hex Drive Insert # 7/64
Bit 1/4 Hex Drive Insert # 4mm Bit 1/4 Hex Drive Insert # 5mm Bit 1/4 Hex Drive Insert # 7/64
APEX FASTENERS 185-5X Bit 1/4 Hex Drive Insert # 7/32 Indian Head 20539 Gasket Shellac Compound SEALANT PUMP/THERMOSTAT .5OZ
Bit 1/4 Hex Drive Insert # 7/32 Hard setting, seals all common gasketing materials in low temperatures and low pressure applications. -65 to 350 degrees Fahrenheit temperature range. Resists diesel fuels and most shop fluids. Use for hose connections and paper/cardboard gaskets. RTV (room temperature vulcanized) silicone gasketing material designed for use in mechanical assemblies and sealing and bonding uneven surfaces. Upon curing, which occurs when the product is exposed to the moisture in air, the silicone forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering, is sensor safe, has good temperature resistance up to 500 degrees F intermittent and is great for many automotive applications. 1 hour cure time.
SEALANT SILICONE BLACK .5OZ   Radiator Specialty C105 Sealant/Conditioner Alumaseal ASLC 16 Radiator Sealer
RTV (room temperature vulcanized) silicone gasketing material designed for use in mechanical assemblies and sealing and bonding uneven surfaces. Upon curing, which occurs when the product is exposed to the moisture in air, the silicone forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering, is sensor safe, has good temperature resistance up to 500 degrees F intermittent and is great for many automotive applications. 1 hour cure time. Circulates through the cooling system., Seals leaks, stops head gasket and combustion chamber seepage, prevents rust and lime from forming. In a plastic bottle. Stops leaks safely, quickly, and easily. Compatible with all antifreeze and coolants. Safe for all metal, plastic, and rubber cooling system parts.
APEX FASTENERS 185-2MM Bit 1/4 Hex Drive Insert # 2mm Ultra Black 22072 Spray Sealant Permatex 22071 Gasket Maker
Bit 1/4 Hex Drive Insert # 2mm OEM specified. For dealership warranty requirements, ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistance properties. Temperature range -65 to 500 degreesF (-54 to 260 degreesC) intermittent. Resists auto and shop fluids and vibration. Non-flammable, non-toxic. Single component, room temperature vulcanizing compound designed to provide "formed-in-place" gaskets for mechanical assemblies. Replaces most cut gaskets, can be used as a gasket maker or dressing. Temperature range of -65 to 500 degrees F intermittent. Cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket that resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Non-flammable and non-toxic.
Form-A-Gasket 80008 Fast Drying Gasket Sealant Form-A-Gasket 80016 Gasket Sealant SEALANT SILICONE BLUE RTV 3OZ
Fast drying, hard-setting sealant designed for sealing rigid materials and flanges, or patching holes and joints where permanent assembly is desired. -65 to 400 degrees Fahrenheit temperature range. Resists common shop fluids and fuels. Use for freeze plugs, threaded connections and manifold gaskets. Use on cork, metal, plastic, gaskets, pipes and flanges. Slow drying, non-hardening sealant designed  for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. -65 to 400 degrees Fahrenheit temperature range. Resists common shop fluids and fuels. Use where sealing is more important than adhesion for valve cover and oil pan gaskets. Use on gaskets, flanges, pipe joints and threaded connections. RTV (room temperature vulcanized) silicone gasketing material designed for use in mechanical assemblies and sealing and bonding uneven surfaces. Upon curing, which occurs when the product is exposed to the moisture in air, the silicone forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering, is sensor safe and is great for many automotive applications.
SEALANT SILICONE CLEAR 3OZ    Form-A-Gasket 80015 Gasket Sealant SEALANT SILICONE WHITE 3OZ
General purpose sealant adhesive, RTV (room temperature vulcanized)  silicone designed for use in household or mechanical assembly applications. Upon curing, which occurs when the product is exposed to the moisture in air, the silicone forms a tough, waterproof, mildew and mold resistant seal on most surfaces. It will not shrink or crack, resists weathering, is sensor safe and is great for many household and automotive applications. Slow drying, non-hardening sealant designed  for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. -65 to 400 degrees Fahrenheit temperature range. Resists common shop fluids and fuels. Use where sealing is more important than adhesion for valve cover and oil pan gaskets. Use on gaskets, flanges, pipe joints and threaded connections. General purpose sealant adhesive, RTV (room temperature vulcanized)  silicone designed for use in household or mechanical assembly applications. Upon curing, which occurs when the product is exposed to the moisture in air, the silicone forms a tough, waterproof, mildew and mold resistant seal on most surfaces. It will not shrink or crack, resists weathering, is sensor safe and is great for many household and automotive applications.
Form-A-Gasket 80007 Gasket Sealant Permatex 81158 Silicon Adhesive Sealant Permatex 80022 Gasket Maker
Fast drying, hard-setting sealant designed for sealing rigid materials and flanges, or patching holes and joints where permanent assembly is desired. -65 to 400 degrees Fahrenheit temperature range. Resists common shop fluids and fuels. Use for freeze plugs, threaded connections and manifold gaskets. Use on cork, metal, plastic, gaskets, pipes and flanges. Seals, bonds, insulates, repairs, mends, and secures glass, metal, plastic, fabrics, vinyl weatherstripping and vinyl tops. Protects and repairs electrical wiring. May be applied to horizontal or vertical surfaces. Waterproof, flexible and shock resistant. -60 to 204 degrees C, -80 to 450 degrees F temperature range. Resists oil, water, weather, vibration, grease and shop fluids. Use for windshields, door frames, electrical connections, seams and roofs, vinyl tops and weatherstripping. Will not foul oxygen sensors. Replaces almost any cut gasket, makes reliable formed-in-place gaskets that withstand high temperatures and high pressures. Resists cracking, shrinking and migrating. Coats pre-cut gaskets to increase reliability. First generation 1970-1980 gasket maker. Withstands temperatures -65 to 500 degrees Fahrenheit intermittent. Resists auto and shop fluids. Use for valve covers, oil pans, timing covers, water pumps, thermostat housings and transmission pans.
   
 
1 2 3 4