Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > WELDING SUPPLIES > ACETYLENE HOSE
Sort By:
1
JIG WELDING MAGNETIC LIFT 25LB STORAGE ROD RED 10LBS 14-3/8IN SPRY ANTI-SPLATTER 13OZ
Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks. Made of high impact polypropylene plastic. Includes four (4) internal compartments to separate rod. Screw-type cap and rubber o-ring provide clean, dry, air-tight storage for electrodes. Store up to 10 Lbs. Prevents weld spatter from adhering to MIG nozzles, contact tips, weld area and work surface.
GEL WELDING NOZZLE16OZ NO SILI MGNT ALL PUR 6-1/4IN 1/PK     JIG SUPPORT MAG LRG 45/90/135
Eliminates erratic operation with a film that will not clog orifices and threads on MIG nozzles and contact tips. Suitable for use on fixtures of semi- and automatic welders. Odorless, non-flammable, non-toxic and silicone free, it will not cause porosity. Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks. Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks.
PLIERS LOCKING 4-PRONG 8-3/8IN PLIERS LOCKING CCLAMP 10-1/2IN PLIERS MIG 7 IN 1 INSULATED
8-3/8" (212.8mm) long with 2" (50.8mm) maximum jaw opening and 2-1/2" - 3" (63.5mm - 76.2mm) depth. Designed to grip a few inches from the end of the metal. Allows weld to start or finish at the end of the joint. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING. 10-1/2" (266.7mm) long with 3-3/4" (95.3mm) maximum opening and 3" (76.2mm) depth. Extra clamping capacity for large objects. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING. These MIG pliers includes seven features for MIG welding applications. The features include: (1) Needle nose pliers grip for pulling, (2) Small serrated hole for MIG tips, (3) Flat surfaces for hammering, (4) Cutter to trim MIG wire, (5) large serrated hole for nozzle, (6) Spring loaded handle and (7) Heavy insulated comfort grip.
C-CLAMP LOCKING JAWPAW10-1/2IN COUPLER AB BRASS OXY/ACETYLENE Irwin 25 Welding Clamp
10-1/2" (266.7mm) long with 3-3/4" (95.3mm) maximum opening and 3" (76.2mm) depth. Extra clamping capacity for large objects. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING. Use to connect "A" size fittings to "B" size fittings. For use in welding applications or for holding awkward shapes in place. U- shaped jaws provide enhanced visibility and more working space. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Throat depth 1-3/4", Jaw capacity 1-5/8"; Jaw depth 1-3/4".
GUIDE PIPE CUTTING 2-3/8TC 4-1 GUIDE PIPE CUTTING 2-7/8TC 4-1 HOSE OXY/ACET 1/4X25FT R-GRADE
Made from high grade steel so it's reusable. Four different cuts from each guide: Saddle cut, 45 degree, 22-1/2 degree and 90 degree. Includes a spring loaded hinge. Painted red. Made from high grade steel so it's reusable. Four different cuts from each guide: Saddle cut, 45 degree, 22-1/2 degree and 90 degree. Includes a spring loaded hinge. Painted red. Suitable for use with oxygen-acetylene only. Red hose for acetylene. Green hose for oxygen. use with acetylene fuel gas only. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 minutes. Couple with one inch ferrules only. Includes standard "B" fittings.
HOSE OXT/ACET 1/4X50FT R-GRADE HOSE OXY/ACETYLENE 1/4INX25FT WHEEL/HANDLE KIT-313/314WELDRS
Suitable for use with oxygen-acetylene only. Red hose for acetylene. Green hose for oxygen. use with acetylene fuel gas only. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 minutes. Couple with one inch ferrules only. Includes standard "B" fittings. Suitable for use with propane, propylene and MAPP gas. Features neoprene coating inside and out to resist corrosion from oil and petroleum-based fuel gases. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 minutes. Couple with one inch ferrules only. Includes standard "B" fittings. Wheel and handle kit for "Forney" 00313 & 00314 ARC Welders (sku #: 890.9400).
HOSE OXY/ACETYLENE 1/4INX50FT CART WELDER PTBL 11.5X27.5 BLK
Suitable for use with propane, propylene and MAPP gas. Features neoprene coating inside and out to resist corrosion from oil and petroleum-based fuel gases. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 minutes. Couple with one inch ferrules only. Includes standard "B" fittings. Fits "Forney" 300 series welders and plasma cutters and all similar sized welders. 11-1/2" wide x 27-1/2" tall. 3-levels. Four casters included. 1.0mm thick steel. Max recommended weight capacity: 90 lbs (40.8 Kg).
   
 
1