Home > POWER TOOLS & ACC > INDUSTRIAL GRADE FASTENERS > DRILL HOLDERS
Sort By:
1 2
Solder Seal Gunk M2713 Power Steering Fluid with Stop Leak STP 66046 Power Steering and Stop Leak

Product price is not filled in. This product cannot be purchased.

Stops leaks, revitalizes old seals, prevents wear, foam and oxidation. In a plastic bottle. Formulated to stop or reduce fluid loss caused by seals which leak due to wear or shrinkage (not for use with broken or scored seals). One treatment helps stop most wear and shrinkage. Can be used instead of regular power steering fluid as preventive maintenance. Compatible with all approved power steering fluids. Helps protect against wear and pump breakdown.
Solder Seal Gunk DE1 Windshield De-Icer Honeywell AS-262 Power Steering Fluid Prestone AS-242 Windshield De-icer
Defrosts car windows instantly. Helps free frozen locks. Spray in advance to help prevent frost formation. One treatment stops or reduces most fluid loss caused by leaky seals. Conditioners revitalize dried, shrunken, and hardened seals. Mixes with all approved power steering fluid and should be used for preventative maintenance. Meets requirements for GM, Ford, Chrysler, AMC, and most foreign cars. Prevents refreezing and smearing. A concentrated formula with a high powered propellant for windows, locks and wipers.
Solder Seal Gunk Steer Seal M1712 Power Steering Sealer Solder Seal Gunk M2732 Power Steering Fluid with Stop Leak No-Leak 20301 Power Steering Treatment
Rejuvenates seals, for most domestic and foreign vehicles, for aging systems. 2 oz treats unit. In a plastic bottle. Non-corrosive top off fluid designed for vehicles requiring non synthetic fluid to keep power steering fluids at proper levels. Helps prevent leaks by protecting seals and hoses. Formulated with detergent additives and anti-foaming agents. Intermixes with factory fluids, making steering easier and smoother. In a plastic bottle. Stops and prevents power steering leaks. Safe, compatible with all power steering fluids. Stops squeaks and repairs o-rings and seals.
No-Leak 20302 Power Steering Treatment Lucas Oil 10008 Power Steering Stop Leak Lucas Oil 10011 Power Steering Stop Leak
Stops and prevents power steering leaks. Stops squeaks. Conditions seals. Safe and compatible with other power steering fluids. Stops leaks in power steering unit seals. Reduces slack, squeals and hard spots in worn rack and pinions. Stops leaks in power steering unit seals. Reduces slack, squeals and hard spots in worn rack and pinions.
Thermoid 334050 Vacuum Hose Abbott Rubber SPVAC1850 Auto Vacuum Tubing Abbott Rubber SPVAC3650 Auto Vacuum Tubing
Similar to the SAE J1037 specification. Will not deteriorate from heat, weathering, or ozone. Maintains its flexibility even at low temperatures. EPDM tube construction. 7/64"  fits 1/8" nipple, 5/32" fits 3/16" nipple. Mainly used for windshield wiper tubes but used for a variety of applications where low pressure is present. Bulk self-dispensing 50' spool. Mainly used for windshield wiper tubes but used for a variety of applications where low pressure is present. Bulk self-dispensing 50' spool.
Abbott Rubber SPVAC1450 Auto Vacuum Tubing Thermoid 24078 Fuel Line Hose Thermoid 25060 Fuel Line Hose
Mainly used for windshield wiper tubes but used for a variety of applications where low pressure is present. Bulk self-dispensing 50' spool. Designed for conveying most modern fuels in cars, trucks, buses, etc. Withstands oil, grease, abrasion, and ozone. Exceeds the burst requirements of the SAE specification. Designed for conveying most modern fuels in cars, trucks, buses, etc. Withstands oil, grease, abrasion, and ozone. Exceeds the burst requirements of the SAE specification.
Thermoid 24088 Fuel Line Hose Coastal 22243 Coastal Power Steering Fluid Abbott Rubber SFIE Fuel Line Hose
Designed for conveying most modern fuels in cars, trucks, buses, etc. Withstands oil, grease, abrasion, and ozone. Exceeds the burst requirements of the SAE specification. Formulated with quality virgin base oils and a superior additive package designed to inhibit rust and corrosion, provide antiwear protection, resist oxidation and suppress foaming. Pre-cut fuel/vapor/PVC hose.
Rain?X RX44014 De-Icer Fill-Rite FRH07512 Fuel Transfer Hose with Static Wire Prestone AS-260 Power Steering Fluid
Aerosol spray quickly melts snow and ice on contact. Also applies Rain-X glass treatment making your windshield ice, snow, and sleet repellant. Used with all electric pumps with 3/4" outlets. For dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils. Nitrile inner tube, external is a blend of Nitrile and PVC materials for protection against cuts, abrasions and snags, and for puncture resistance. 8" internal spring guard protects the hose from exceeding its bend radius, to last longer. Braided copper static ground wire. Threaded fittings. Made in the USA. Formulated for use in GM, Ford, Chrysler, and most foreign cars and light trucks. Protects against pump breakdown caused by wear, oxidation, and foaming. Pours at sub-zero temps to help assure cold weather protection.
Abbott Rubber RUFEC Micro Fuel Line Hose Abbott Rubber RUFE Micro Fuel Line Hose Fill-Rite FRH07520 Fuel Transfer Hose
Marked every foot with a notch mark and UPC code. Marked every foot with a notch mark and UPC code. Used with all electric pumps with 3/4" outlets. For dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils. Nitrile inner tube, external is a blend of Nitrile and PVC materials for protection against cuts, abrasions and snags, and for puncture resistance. 8" internal spring guard protects the hose from exceeding its bend radius, to last longer. Braided copper static ground wire. Threaded fittings. Made in the USA.
Fill-Rite FRH10014 Fuel Transfer Hose with Static Wire Abbott Rubber SP2300-50 Fuel Line Hose Fill-Rite FRH10020 Fuel Transfer Hose
Used with pumps with 1" outlets. For dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils. Threaded fittings. Made in the USA. Fuel line/vapor emission hose is manufactured to meet the specifications for multiple types of gasoline, including those enhanced with alcohol up to 15 percent. The tube and cover are resistant to oil, ozone, and gasoline. The inner reinforcement is a spiral synthetic cord. Rated at 40 PSI. Used with pumps with 1" outlets. For dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils. Threaded fittings. Made in the USA.
   
 
1 2