Home > POWER TOOLS & ACC > INDUSTRIAL GRADE FASTENERS > 3/8 SQUARE DRIVE TORX® SOCKETS
Sort By:
1 2
Solder Seal Gunk M2713 Power Steering Fluid with Stop Leak Lubrimatic 05-028 Standard Jaw Hydraulic Grease Gun Coupler STP 66046 Power Steering and Stop Leak
Stops leaks, revitalizes old seals, prevents wear, foam and oxidation. In a plastic bottle. For hand-operated lube equipment only. 4,500 PSI recommended working pressure. Features spring-loaded ball check valve. Fits all 1/8" NPT threads. Formulated to stop or reduce fluid loss caused by seals which leak due to wear or shrinkage (not for use with broken or scored seals). One treatment helps stop most wear and shrinkage. Can be used instead of regular power steering fluid as preventive maintenance. Compatible with all approved power steering fluids. Helps protect against wear and pump breakdown.
Lubrimatic 05-031 Standard Jaw Curved Grease Gun Coupler Honeywell AS-262 Power Steering Fluid Lubrimatic 05-037 Gun Injector Needle Nozzle
For hand-operated lube equipment only. 4,500 PSI recommended working pressure. Features spring-loaded ball check valve. Fits all 1/8" NPT threads. One treatment stops or reduces most fluid loss caused by leaky seals. Conditioners revitalize dried, shrunken, and hardened seals. Mixes with all approved power steering fluid and should be used for preventative maintenance. Meets requirements for GM, Ford, Chrysler, AMC, and most foreign cars. Lubricates in very tight places like universal joints and sealed bearings. Stainless steel 18-gauge x 1-1/2" long needle. Equipped with standard grease fitting and protective plastic holder. For hand-operated grease guns only.
Lubrimatic 05-061 Curved Grease Gun Extension Solder Seal Gunk Steer Seal M1712 Power Steering Sealer Moltan 7508 All Purpose Safety Absorbent
Standard length pipe for most hand operated grease guns. 1/8" NPT each end, 30-degree angle. Rejuvenates seals, for most domestic and foreign vehicles, for aging systems. 2 oz treats unit. In a plastic bottle. Made from Montmorillonite clay, a naturally occurring mineral with superior absorptive ability. Designed for quick clean up of water, oil, and grease. Larger coarse product calcined at a higher temperature producing harder granules for better traction, permitting delayed waste disposal. All-purpose absorbent suitable for commercial or home.
Lubrimatic 10-200 Economy Flexible Grease Gun Hose Lubrimatic 10-214 Economy Flexible Grease Gun Hose Solder Seal Gunk M2732 Power Steering Fluid with Stop Leak
For use on hand operated grease guns only. Steel 1/8" NPT male fittings on each end. For use on hand operated grease guns only. Steel 1/8" NPT male fittings on each end. Non-corrosive top off fluid designed for vehicles requiring non synthetic fluid to keep power steering fluids at proper levels. Helps prevent leaks by protecting seals and hoses. Formulated with detergent additives and anti-foaming agents. Intermixes with factory fluids, making steering easier and smoother. In a plastic bottle.
Lubrimatic 10-201 Economy Flexible Grease Gun Hose Plews 10-219 Flexible Grease Hose No-Leak 20301 Power Steering Treatment
For use on hand operated grease guns only. Steel 1/8" NPT male fittings on each end. For use on hand operated grease guns only. Steel 1/8" NPT male fittings on each end. Stops and prevents power steering leaks. Safe, compatible with all power steering fluids. Stops squeaks and repairs o-rings and seals.
Amrep ZUABS3 All Purpose Instant Spill Absorbent No-Leak 20302 Power Steering Treatment Lubrimatic 05-034 Hydraulic Grease Gun Coupler
All-purpose, absorbs oil, solvents, waste paint and antifreeze. Ultra light weight. Low dust, non clay formulation. Stops and prevents power steering leaks. Stops squeaks. Conditions seals. Safe and compatible with other power steering fluids. For hand-operated grease gun only. Fits all 1/8" NPT threads. 6,000 PSI recommended working pressure. All steel construction. Bulk.
Apex Fasteners TX-3108 Socket 3/8 Female Square drive 8 Female Lucas Oil 10008 Power Steering Stop Leak Thriftysorb 8440 Oil Absorbent
Stops leaks in power steering unit seals. Reduces slack, squeals and hard spots in worn rack and pinions. Made from Montmorillonite clay, a naturally occurring mineral with superior absorptive ability. Designed for quick clean up of water, oil, and grease, smaller particles allow product to be more concentrated permitting quicker absorption. All-purpose absorbent suitable for commercial or home.
Lubrimatic 30-200 2-Way Standard Duty Grease Gun Optisorb 8925 All Purpose Oil Absorbent Plews 30-118 Grease Gun
For household and do-it-yourself automotive use. Uses standard 14 oz. cartridge. Develops up to 6,000 PSI. Delivers 1 oz. of grease/40 strokes. 5-3/8" pipe and coupler. Boxed. Made from diatomaceous earth (DE), a naturally occurring mineral with superior absorptive ability. Industrial grade absorbent, designed for quick clean up of water, oil, and grease. Large particles quickly and easily soak up spills like a sponge, offering less breakdown and better traction in areas where spills have been absorbed. Designed for draining and filling non-corrosive liquids. Barrel holds approximately 1 pint with 9" stroke. Features 12" plastic hose and durable corrosion-resistant finish.
Lucas Oil 10011 Power Steering Stop Leak Plews 30-132 Mini Grease Gun Kit Plews 30-300 Standard Duty Grease Gun
Stops leaks in power steering unit seals. Reduces slack, squeals and hard spots in worn rack and pinions. Develops up to 3,600 PSI for automotive, industrial, farm, RV, and marine use. Tool box size for hard-to-reach jobs. Zinc die-cast head cap and pistol grip for 1-hand operation. 3-oz. tube of LubriMatic grease included. 3-1/2" pipe and coupler. Carded. Develops up to 5,000 PSI with 1-hand operation. 2-way loading, 14-oz. cartridge or suction load. Head cap port for adding air bleeder or bulk loader fitting. Delivers up to 5,000 psi, 1-oz./40 strokes. 3-1/2" pipe and coupler. Boxed.
Lubrimatic 30-475 3-Way Professional Grease Gun Coastal 22243 Coastal Power Steering Fluid Lubrimatic 30-416 Variable HD Grease Gun with Pistol
Develops up to 10,000 PSI, for the day-in/day-out service required by industrial users. Variable/short stroke for easy use in confined areas. Rugged, fully zinc-plated finish. Dual port head cap with bulk loader fitting for 3-way loading (14-oz. cartridge, bulk, or suction) and air bleeder valve. Plated lever with comfortable, oversized grip. Delivers 1.8-oz./40 strokes. 5-3/8" pipe and coupler. Boxed. Formulated with quality virgin base oils and a superior additive package designed to inhibit rust and corrosion, provide antiwear protection, resist oxidation and suppress foaming. Variable stroke for use in tight places. 3-way loading: 14 oz. cartridge, bulk or suction. Includes air bleeder valve and bulk loader fitting. Develops up to 7,000 psi. Delivers 1 oz./40 strokes. Includes 18" flex hose and vinyl handle grip.
   
 
1 2