Home > POWER TOOLS & ACC > INDUSTRIAL GRADE FASTENERS > 3/8 SQUARE DRIVE ADAPTERS
Sort By:
1 2 3 ... 5
STP 78572 All Season Water Remover STP 00203 Brake Fluid Heel 28201 Gas Line Anti-Freeze
Provide year-round corrosion and rust prevention. Removes water without alcohol and helps keep fuel injectors clean. Use with every fill up especially during winter and in warm, wet weather. Treats up to 79 litres. Formulated for optimum performance for all disc or drum brake systems requiring DOT 3 fluids. Provides protection against brake failure from vapor lock, helps prevent corrosion. Complies with Federal Motor Vehicle Safety Standard No. 116. Meets SAE spec. J1703. Additives and methanol formula safe for use in all 4-cycle engines. Prevents gas-line freeze-up, rust and corrosion year round. Removes water from fuel system, absorbs moisture in carburetor. Improves engine performance for year-round quick starts. Safe on catalytic converters and fuel injectors. 1 bottle treats up to 10 gallons.
STP 78571 Fuel Injector and Carburetor Treatment Honeywell AS-400P Brake Fluid Coastal 701169/21143 Iso Dry Gasoline Anti-Freeze
Helps save gas and improves performance by keeping fuel injectors and carburetors clean of harmful deposits. Helps prevent power loss, reduce engine friction and maintain optimum engine efficiency. Use regularly with fill up. Treats up to 79 litres. High boiling point gives an extra margin of safety and is designed for safe operation of high-powered vehicles. For ABS, disc, and drum brake systems. DOT 3, meets or exceeds Federal Motor Vehicle Safety Standard 116 and SAE Spec. J1703. 284 degrees Fahrenheit min wet boiling point. Allows for quicker starts, helps prevent frozen gas lines and absorbs water. Can be used year round in 4-cycle gasoline engines. It will not harm catalytic converters, oxygen sensors or fuel injectors.
Solder Seal Gunk M2713 Power Steering Fluid with Stop Leak STP 78573 Gas Treatment Gumout 800001370 Gas Treatment
Stops leaks, revitalizes old seals, prevents wear, foam and oxidation. In a plastic bottle. Improves the quality of gas and keeps fuel injectors and intake valves clean. Helps fight the accumulation of harmful carbon, gum and varnish deposits in the fuel system and remove water. Made with jet fuel, a high-quality carrier of active ingredients. Treats up to 21 gallons of gasoline. Use with every tankfull. Helps to prevent deposit build up, fight rust and corrosion and remove water to help reduce gas line freeze. Use with up to 21 gallons of gasoline every fill up.
STP 66046 Power Steering and Stop Leak Solder Seal Gunk DE1 Windshield De-Icer Radiator Specialty M2312 Gas Treatment
Formulated to stop or reduce fluid loss caused by seals which leak due to wear or shrinkage (not for use with broken or scored seals). One treatment helps stop most wear and shrinkage. Can be used instead of regular power steering fluid as preventive maintenance. Compatible with all approved power steering fluids. Helps protect against wear and pump breakdown. Defrosts car windows instantly. Helps free frozen locks. Spray in advance to help prevent frost formation. Helps clean entire fuel system, reduces intake valve deposits, increases fuel economy, removes water, fight gas line freeze. 1 plastic bottle treats 1 tank, use in every tank for maintenance.
STP 66079/ST-1014 Performance Oil Treatment Radiator Specialty M4912 Fuel Injector Cleaner Honeywell AS-262 Power Steering Fluid
Provides a thick cushion between moving engine parts to fight friction and protect against engine wear. Use every oil change. Treats 4-5 litres of oil. Keeps fuel injectors and carburetors clean, restores lost power, reduces exhaust emissions. In a plastic bottle. One treatment stops or reduces most fluid loss caused by leaky seals. Conditioners revitalize dried, shrunken, and hardened seals. Mixes with all approved power steering fluid and should be used for preventative maintenance. Meets requirements for GM, Ford, Chrysler, AMC, and most foreign cars.
STP 78575 Super Fuel Injector Cleaner Prestone AS-242 Windshield De-icer Gumout 800001706 Octane Booster
Unclogs dirty fuel injectors to restore performance and acceleration. Helps dissolve and remove harmful carbon, gum and varnish deposits on fuel injectors. Helps smooth rough idle and eliminate tough starts. Treats up to 21 gallons/79 litres of gasoline. Add to gas every 6,000km or every oil change. Prevents refreezing and smearing. A concentrated formula with a high powered propellant for windows, locks and wipers. Helps stop knocks and pings, boost octane rating. Use with up to 15 gallons of gasoline every fill up.
Radiator Specialty M5012 Lead Substitute Gas Treatment Radiator Specialty M5112 Gasoline Octane Booster Solder Seal Gunk M710 Ultra Non-Chlorinated Brake Cleaner
Replaces lead protection, contains valve seat anti-wear additive, intended for off-road use. 1 bottle treats up to 20 gallons. In a plastic bottle. Restores engine performance. Contains additives that remove water and fight rust. Reduces emissions, knock, ping and hesitation. Cleans injectors, intake valve, and combustion chamber deposits. Removes deposits which tend to cause engine octane requirements to rise. After use of product, many engines will accept regular unleaded gasoline without knocking, pinging and after-run. In a plastic bottle. Will help remove surface contaminants such as brake fluid, oil, and grease from brake linings, drums, other brake parts and CV joint assemblies. Degreases quickly and can be used without disassembling the brake unit. Compliant with the South Coast Air Quality Management District (SCAQMD) Rule 1171. Leaves no residue and dries quickly. Helps retard the release of asbestos dust and other airborne particulate matter when used as directed. Contains no chlorinated solvents.  Protect rubber or plastic brake parts, seals, and painted surfaces from spray. Low VOC 50 state formula. Aerosol can.
STP 78595 High Mileage Oil Treatment Gumout 800001363 Fuel Injector Cleaner Brakleen 5089 Brake Parts Cleaner
For use in vehicles with over 75,000 miles. High-viscosity formula is formulated to help fight metal-to-metal friction by providing a thicker cushion between moving engine parts. Helps to decrease metal-to-metal contact, reduce oil consumption, cushion noisy valves and lifters and stop minor oil leaks. Use with every oil change. Designed for high mileage vehicles. Helps clean fuel injectors, intake valves and prevent future deposit buildup. Use every 3,000 miles. Treats up to 21 gallons. Formulated to quickly and effectively remove brake fluid and dust, grease, oils and other contaminants from brake parts, lining, and pads. Helps brakes last longer and perform more efficiently. Dries fast, degreases instantly, leaves no residue. Eliminates need to disassemble. Contains a chlorinated solvent. Aerosol can.
Gumout 800001371 Fuel Injector Cleaner Solder Seal Gunk Steer Seal M1712 Power Steering Sealer Scepter 3896 Drain Pan
Helps clean fuel injectors, prevent future deposit build up and improve fuel economy and acceleration. Treats 21 gallons of fuel. Rejuvenates seals, for most domestic and foreign vehicles, for aging systems. 2 oz treats unit. In a plastic bottle. Resistant to chemicals and solvents; will not rust, dent, or corrode.
Liquid Wrench M3312 Hydraulic Jack Oil Sta-Bil 22265 Fuel Treatment Blaster 16-CBD Citrus Based Degreaser
Formulated with extreme pressure additives, for use in all hydraulic jacks. In a plastic bottle. For use in cars, trucks and small engines. Prevents corrosion, helps remove water from fuel. Cleans fuel injectors, carburetors and intake valves for better overall performance. Use at every fill up. Biodegradable and non-toxic formula is non-staining. Fast acting, rinses clean with water. Removes tar, grease, oil, resin and ink from virtually any surface.  Safely cleans stainless steel.
   
 
1 2 3 ... 5