Home > POWER TOOLS & ACC > INDUSTRIAL GRADE FASTENERS > 1/4 SQUARE DRIVE TORX® SOCKETS
Sort By:
1 2 3 ... 5
STP 78572 All Season Water Remover Heel 28201 Gas Line Anti-Freeze STP 78571 Fuel Injector and Carburetor Treatment
Provide year-round corrosion and rust prevention. Removes water without alcohol and helps keep fuel injectors clean. Use with every fill up especially during winter and in warm, wet weather. Treats up to 79 litres. Additives and methanol formula safe for use in all 4-cycle engines. Prevents gas-line freeze-up, rust and corrosion year round. Removes water from fuel system, absorbs moisture in carburetor. Improves engine performance for year-round quick starts. Safe on catalytic converters and fuel injectors. 1 bottle treats up to 10 gallons. Helps save gas and improves performance by keeping fuel injectors and carburetors clean of harmful deposits. Helps prevent power loss, reduce engine friction and maintain optimum engine efficiency. Use regularly with fill up. Treats up to 79 litres.
Coastal 701169/21143 Iso Dry Gasoline Anti-Freeze STP 78573 Gas Treatment Gumout 800001370 Gas Treatment
Allows for quicker starts, helps prevent frozen gas lines and absorbs water. Can be used year round in 4-cycle gasoline engines. It will not harm catalytic converters, oxygen sensors or fuel injectors. Improves the quality of gas and keeps fuel injectors and intake valves clean. Helps fight the accumulation of harmful carbon, gum and varnish deposits in the fuel system and remove water. Made with jet fuel, a high-quality carrier of active ingredients. Treats up to 21 gallons of gasoline. Use with every tankfull. Helps to prevent deposit build up, fight rust and corrosion and remove water to help reduce gas line freeze. Use with up to 21 gallons of gasoline every fill up.
Lubrimatic 05-028 Standard Jaw Hydraulic Grease Gun Coupler Radiator Specialty M2312 Gas Treatment Radiator Specialty M4912 Fuel Injector Cleaner
For hand-operated lube equipment only. 4,500 PSI recommended working pressure. Features spring-loaded ball check valve. Fits all 1/8" NPT threads. Helps clean entire fuel system, reduces intake valve deposits, increases fuel economy, removes water, fight gas line freeze. 1 plastic bottle treats 1 tank, use in every tank for maintenance. Keeps fuel injectors and carburetors clean, restores lost power, reduces exhaust emissions. In a plastic bottle.
Lubrimatic 05-031 Standard Jaw Curved Grease Gun Coupler STP 78575 Super Fuel Injector Cleaner STARTING FLUID PREMIUM 10OZ
For hand-operated lube equipment only. 4,500 PSI recommended working pressure. Features spring-loaded ball check valve. Fits all 1/8" NPT threads. Unclogs dirty fuel injectors to restore performance and acceleration. Helps dissolve and remove harmful carbon, gum and varnish deposits on fuel injectors. Helps smooth rough idle and eliminate tough starts. Treats up to 21 gallons/79 litres of gasoline. Add to gas every 6,000km or every oil change. High concentration of premium ethyl/ether formula for gasoline and diesel engines, complies with the federal low-sulfur content requirements for use in diesel motor vehicles and non-road engines. Designed to start stubborn engines fast and is effective down to -65 degreesF (-54 degreesC).
Plews 11-855 Standard Grease Fitting Assortment Solder Seal Gunk M3815 Standard Thrust Starting Fluid Lubrimatic 05-037 Gun Injector Needle Nozzle
Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Includes 4 straight, 2 45-degree, and 2 90-degree fittings. To promote quick starting of gasoline and diesel engines under extreme cold conditions down to -65 degrees F. Saves battery and ignition during cold weather. Contains upper cylinder lubricant and corrosion inhibitors. Spray fluid directly into air cleaner of air intake before starting engine. Avoid spraying for over 5 seconds per attempt. If engine still refuses to start repeat procedure for up to 3 times. Aerosol can. Lubricates in very tight places like universal joints and sealed bearings. Stainless steel 18-gauge x 1-1/2" long needle. Equipped with standard grease fitting and protective plastic holder. For hand-operated grease guns only.
Gumout 5072866 Instant Starting Fluid Gumout 800001706 Octane Booster Radiator Specialty M5012 Lead Substitute Gas Treatment
For gasoline engines. Perfect for extreme cold or humid weather. Helps stop knocks and pings, boost octane rating. Use with up to 15 gallons of gasoline every fill up. Replaces lead protection, contains valve seat anti-wear additive, intended for off-road use. 1 bottle treats up to 20 gallons. In a plastic bottle.
Radiator Specialty M5112 Gasoline Octane Booster Solder Seal Gunk M710 Ultra Non-Chlorinated Brake Cleaner Gumout 800001363 Fuel Injector Cleaner
Restores engine performance. Contains additives that remove water and fight rust. Reduces emissions, knock, ping and hesitation. Cleans injectors, intake valve, and combustion chamber deposits. Removes deposits which tend to cause engine octane requirements to rise. After use of product, many engines will accept regular unleaded gasoline without knocking, pinging and after-run. In a plastic bottle. Will help remove surface contaminants such as brake fluid, oil, and grease from brake linings, drums, other brake parts and CV joint assemblies. Degreases quickly and can be used without disassembling the brake unit. Compliant with the South Coast Air Quality Management District (SCAQMD) Rule 1171. Leaves no residue and dries quickly. Helps retard the release of asbestos dust and other airborne particulate matter when used as directed. Contains no chlorinated solvents.  Protect rubber or plastic brake parts, seals, and painted surfaces from spray. Low VOC 50 state formula. Aerosol can. Designed for high mileage vehicles. Helps clean fuel injectors, intake valves and prevent future deposit buildup. Use every 3,000 miles. Treats up to 21 gallons.
Lubrimatic 11-301 Straight Grease Fitting Brakleen 5089 Brake Parts Cleaner Gumout 800001371 Fuel Injector Cleaner
Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Formulated to quickly and effectively remove brake fluid and dust, grease, oils and other contaminants from brake parts, lining, and pads. Helps brakes last longer and perform more efficiently. Dries fast, degreases instantly, leaves no residue. Eliminates need to disassemble. Contains a chlorinated solvent. Aerosol can. Helps clean fuel injectors, prevent future deposit build up and improve fuel economy and acceleration. Treats 21 gallons of fuel.
Lubrimatic 05-061 Curved Grease Gun Extension Liquid Wrench M3312 Hydraulic Jack Oil Sta-Bil 22265 Fuel Treatment
Standard length pipe for most hand operated grease guns. 1/8" NPT each end, 30-degree angle. Formulated with extreme pressure additives, for use in all hydraulic jacks. In a plastic bottle. For use in cars, trucks and small engines. Prevents corrosion, helps remove water from fuel. Cleans fuel injectors, carburetors and intake valves for better overall performance. Use at every fill up.
Lubrimatic 11-957 Assortment Grease Fitting Kit Blaster 16-CBD Citrus Based Degreaser Lubrimatic 10-200 Economy Flexible Grease Gun Hose
Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Includes 4 straight, 2 45-degree, and 2 90-degree fittings. 6mm -1.0 thread. Biodegradable and non-toxic formula is non-staining. Fast acting, rinses clean with water. Removes tar, grease, oil, resin and ink from virtually any surface.  Safely cleans stainless steel. For use on hand operated grease guns only. Steel 1/8" NPT male fittings on each end.
   
 
1 2 3 ... 5