Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > WELDING SUPPLIES > TORCH WELDING SUPPLIES
Sort By:
1
Dremel 932 Grinding Stone Dremel 952 Grinding Stone Dremel 402 Mandrel
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Specially designed for working with conic surfaces. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. To be used with all cutting wheels, sanding discs and polishing wheels.
Dremel 8193 Grinding Stone Dremel 560 Cutting Bit Dremel 432 Drum Sander Band
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. Makes fast clean cuts in drywall for electrical boxes, air vents and other wall features. Do not run in excess of 30,000 RPM. Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM.
Dremel 408 Drum Sander Band Dremel 430 Drum Sander Band Dremel 480 Collet
Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237.
Dremel 83322 Grinding Stone Dremel 481 Collet Dremel 462 Polishing Point
Industrial abrasive made for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non ferrous metals or for working with conical and flat surfaces. Do not run in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237. Rubber polishing points are impregnated with abrasive and used on on ferrous metals to remove rough areas, small burrs and scratch marks. Point is ideal for cleaning and defining grooves.
Bosch Accessories 113 Engraving Cutters Dremel EZ Lock Finishing Abrasive Buff Set Bosch 431  Oscillating Tool Accessories
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 RPM. Compatible with both No.EZ402 EZ lock mandrel and standard No.402 mandrel and all Dremel rotary tools. Refinish furniture, clean grills, remove paint, tarnish and more. Includes 2 buffs, 1 coarse, 180 grit and 1 medium, 280 grit. A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8" shank. For rough shaping and smoothing wood and fiberglass. Ideal for removing rust from metal surfaces. Also ideal for shaping rubber surfaces. 1/4" bit diameter (6.4 mm). Pack of 6.
Dremel 422 Felt Polishing Tip Dremel 429 Felt Polishing Wheel Dremel 512E Finishing Abrasive Buff
Polishing point is made to take a semi-rough finish and polish it to a smooth finish on most ferrous metals, stones, glass and ceramics. Used with 401 mandrel. Do not run in excess of 30,000 RPM. Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM. For cleaning, light sanding and removing tarnish from brass. Use on metal, glass, wood, aluminum and plastics. For use with the EZ402 EZ lock mandrel (SKU #482.4447) or standard 402 mandrel (SKU #619.9400). Includes 2 fine 320 grit buffs.
EZ-Lock 423E/423 Polishing Wheel Dremel 561 Spiral Cutting Bit Dremel 540 Cut-Off Wheel
Polish silverware to high luster, car detailing and restore door and window hardware. Compatible with all Dremel rotary tools, EZ402 EZ Lock mandrel and standard 402 mandrel (619.9400). Do not run in excess of 30,000 RPM. Cuts wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. Do not run in excess of 30,000 RPM. Easily cuts off slots bolts, screws, sheet metal, thin wood and plastic, trim castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No. 402 mandrel.
BRUSH CARBON STEEL 3/4IN 2PK  BRUSH CARBON STEEL 1/2IN 2PK  Dremel 453 Precision Ground Sharpening Stone
Ideal for cleaning and removing rust and corrosion from items made of brass, copper, gold or other soft ferrous metals. Perfect for getting into hard to reach places like slots. You can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces. Ideal for cleaning and removing rust and corrosion. Use on items made of brass, copper, gold or other soft ferrous metals such as tools, door knobs, automobile parts and electrical contacts. Can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces and getting into hard to reach places like slots. Used for sharpening chain saw blades, quickly and easily.
Dremel 454 Precision Ground Sharpening Stone Dremel 455 Precision Ground Sharpening Stone Bosch 90930 Carbon Motor Brush
Used for sharpening chain saw blades, quickly and easily. Used for sharpening chain saw blades, quickly and easily. For No. 275, No. 285, and No. 395 Type 3, 4 and 5 Moto-Tools.
Dremel 407 Drum Sander Band Dremel 953 Grinding Stone DISC SANDING 240GRIT
DISC SANDING 240GRIT
Our Price: $5.92
Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. Great for light shaping and sanding. EZ Lock for faster accessory changes.
WHEEL EMERY IMPREGNATED 1IN   BRUSH NYLON BRISTLE 3/4IN 2PK BRUSH NYLON BRISTLE 1/8IN 2PK
Emery impregnated disc is ideal for general polishing of most ferrous metals, stones, glass and ceramics. Also ideal to clean and define grooves. Use it to remove small burrs and scratch marks left by grinding and sanding. Ideal for light deburring, general cleaning and polishing in hard to reach places such as slotted surfaces. Long wearing nylon bristles. Can also be used for cleaning hard plastic such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. Ideal for light deburring, cleaning and polishing in hard to reach places such as slotted surfaces. Nylon bristles make it great for polishing silverware, jewelry and other precious metals. Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels. Can be used with polishing compound.
BRUSH CARBON STEEL 1/8IN 2PK  Dremel 199 High Speed Cutter BRUSH STAINLESS STEEL 3/4IN
Versatile brush for removing rust and corrosion. For use on items made of brass, copper, gold or other soft ferrous metals such as tools, door knobs, automobile parts and electrical contacts. Can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces and getting into hard to reach places like slots. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Ideal for cleaning, deburring and surface finishing. Use on items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles.
BRUSH STAINLESS STEEL 1/2IN   BRUSH STAINLESS STEEL 1/8IN   BRUSH BRASS 3/4 INCH 2PK
Ideal for cleaning, deburring and surface finishing. Use on items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Ideal for cleaning, deburring and surface finishing items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Great for polishing and cleaning. Ideal for cleaning and surface finishing. Use on items made from gold, bronze, copper or brass. Use a brass brush to create a soft, sating or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel).
BRUSH BRASS 1/2 INCH 2PK      BRUSH BRASS 1/8 INCH 2PK      WHEEL SIC IMPREGNATED 1/2IN
Ideal for cleaning and surface finishing items made from gold, bronze, copper or brass. Use a brass brush to create a soft, satin or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel). Ideal for cleaning and surface finishing items made from gold, bronze, copper or brass. Use a brass brush to create a soft, satin or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel). Designed for light stock removal and high luster polishing. Works on a variety of surfaces including steel, aluminum, brass, silver, hard plastics, gold and other metals. Impregnated with silicone abrasive and lubricant. Eliminates the need for polishing compound.
Dremel 192 High Speed Cutter Dremel 107 Engraving Cutter Dremel 118 High Speed Cutter
High speed versatile, carving and engraving cutter. Made of high quality steel for use on wood, plastic and soft metals. Ideal for shaping, hollowing, grooving, slotting and inlaying. Appropriate for curved surfaces. Bit diameter: 3/16" (4.8mm). Dremel Engraving Cutter, 3/32 in Diameter, 9-9/16 in Length, Ball Shape, 1/8 in Arbor/Shank, Carbon Steel, Silver, Applicable Materials: Wood, Fiberglass, Plastic and Soft Metals, 3/32 in Shank Diameter, Single Cut Tooth, For Engraving, Carving and Routing Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
Dremel 124 Rotary Tool Bit Dremel 144 Rotary Tool Bit Dremel 193 High Speed Cutter
Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
Dremel 420 Cut-Off Wheel Quik-Change 4485 Collet Nut Kit Dremel 504 Flap Wheel
For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. Kit consisting of a special collet nut and four collets for use with a variety of Dremel tools, attachments and handpieces. Allows you to quickly change collets to accept bits with shanks of 1/32" to 1/8". Kit contains (1) each 1/8" Collet, 3/32" Collet, 1/16" Collet, 1/32" Collet and Collet Nut. A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic.
Dremel 503 Flap Wheel Dremel 409 Cut-Off Wheel Dremel 502 Flap Wheel
A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic. For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic.
WHEEL KIT DIAMOND 3PIECE 3/4IN Dremel 7144 Wheel Point Bit HOSE REPAIR 3/16IN B-SIZE 6PC
Diamond wheel kit includes (2) 3/4" (19.05 mm) diamond wheels and (1) 1/8" Mandrel. For cutting metal, glass, ceramics and plastics. Max rpm: 30,000. High-speed cutter tipped with diamond particles tapered to a bullet point for fine detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel. Includes 2 barbed hose nipples, 2 hose ferrules, 1-each oxygen and acetylene 9/16"-18 hose nuts and "B" fittings.
HOSE REPAIR 1/4IN B-SIZE 6PC  Dremel EZ471SA Detail Coarse Abrasive Brush Dremel EZ472SA Detail Medium Abrasive Brush
Includes 2 barbed hose nipples, 2 hose ferrules, 1-each oxygen and acetylene 9/16"-18 hose nuts and "B" fittings. For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
Dremel EZ473SA Detail Fine Abrasive Brush Dremel 115 Rotary Tool Bit Dremel 7134 Abrasive Wheel Point
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). Dremel Rotary Tool Bit, 5/16 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 25000 - 30000 rpm Maximum, Cylinder Shape, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes High-speed cutter tipped with diamond particles tapered to a fine point for detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel.
Dremel 650 Router Bit HOSE SPLICE OX/FUEL 3/16IN 6PC HOSE SPLICE OX/FUEL 1/4IN 6PC
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Do not run in excess of 30,000 RPM. Includes 2 barbed hose splicers and 4 hose ferrules. Includes 2 barbed hose splicers and 4 hose ferrules.
Dremel 426 Cut-Off Wheel Dremel 9901 High Speed Cutter Dremel 9903 Rotary Tool Bit
Fiberglass reinforced, use for slicing and cutting metal, wood and plastic.  Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. Shapes, smooths or grinds especially hard materials such as hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 RPM. Shapes, smooths or grinds especially hard materials such as hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 RPM.
Dremel 9904 Rotary Tool Bit Dremel Saw-Max Type 1A Cut-Off Wheel Dremel 654 Router Bit
Dremel Rotary Tool Bit, 3/32 in Diameter, 1/8 in Shank Diameter, Tungsten Carbide Cutting Edge, Applicable Materials: Stainless Steel, Hard Steel, Cast Iron, Ceramics, Non-Ferrous Soft Metal and Plastic, 35000 rpm Maximum, For Shaping, Smoothening and Grinding Cuts a variety of ferrous and nonferrous materials. 3/4" cut depth. .05" wheel thickness. For use on SKU# 454.6933. For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Do not run in excess of 30,000 RPM.
Dremel 125 Rotary Tool Bit Dremel 628-01 Drill Bit Set Dremel 4486 Keyless Chuck
Dremel Rotary Tool Bit, 1/4 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 25000 - 30000 rpm Maximum, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes Bits are made of high speed steel and used for drilling into soft materials. Includes: 1/32", 3/64" bits (use #483 collet), 1/16" bit (use #482 collet), 5/64", 3/32" bits (use #481 collet) and 7/64", 1/8" bits (use #480 collet). Allows you to quickly and easily change accessory bits on  rotary tools 9.6V without changing collets. Accepts all accessory bits with 1/32" to 1/8" shanks.
Dremel EZ476 Cut-Off Wheel Dremel 615 Round Router Bit Dremel EZ Lock Grinding Wheel
For cutting plastics. Compatible with all Dremel rotary tools. Pull-twist-release accessory changes. For use with the EZ402 EZ lock mandrel (SKU #482.4447). For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Designed to flush-grind a surface. Domed shape and extra-thick reinforced aluminum oxide material allows the grinding wheel to be used on either its side or face for surface grinding, shaping, smoothing, deburring, rust removal sharpening, and flush-grinding. Applications include extended general-purpose grinding on metals, castings, welded joints, rivets and rust.  Use with either EZ402 (SKU #482.4447).
Dremel EZ409 Cut-Off Wheel Dremel 569 Grout Removal Bit Dremel Saw-Max Type 1A Cut-Off Wheel
Cuts through metal. Pull-twist-release accessory change. Use with either EZ402 (SKU #482.4447). Solid carbide bit removes wall and floor grout 3/8" below the face surface. Compatible with 275, 285, 395, 381, 398, and 380. Cuts a variety of materials such as wood, laminate flooring, drywall, PVC and plastic. 3/4" cut depth. .075" wheel thickness. For use on SKU# 454.6933.
Dremel 562 Tile Cutting Bit Dremel 9931 High Speed Cutter Dremel EZ456 Cut-Off Wheel
High-speed cutter shapes ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes or create decorative wall tile by cutting a design. Fast cutting, structured tooth-tape, for greater material removal on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile. One piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal. Cut off wheels labeled for easy identification. Compatible with all Dremel rotary tools .
RECPT ELEC CROWFT 50A 125/250 GAUGE OXYGEN  HP 0-4000 PSI   GAUGE 2IN ACETY HP 0-400 PSI
Heavy-duty, bakelite crowfoot-design electrical receptacle with 2-pole/3-wire grounding for surface mounting. NEMA 10-50. 2" (50.8mm) face with 1/4" (6.35mm) national pipe thread (NPT). Features threads that are common to "Forney", "Victor", "Harris", "Smith" and "Marquette" compatible regulators. Solid brass threads and brass casings provide extra long life. 2" (50.8mm) face with 1/4" (6.35mm) national pipe thread (NPT). Features threads that are common to "Forney", "Victor", "Harris", "Smith" and "Marquette" compatible regulators. Solid brass threads and brass casings provide extra long life.
GAUGE 2IN OXY LP 0-200 PSI    GAUGE 2IN ACETY LP 0-30 PSI   Bosch EZ407SA  Oscillating Tool Accessories
2" (50.8mm) face with 1/4" (6.35mm) national pipe thread (NPT). Features threads that are common to "Forney", "Victor", "Harris", "Smith" and "Marquette" compatible regulators. Solid brass threads and brass casings provide extra long life. 2" (50.8mm) face with 1/4" (6.35mm) national pipe thread (NPT). Features threads that are common to "Forney", "Victor", "Harris", "Smith" and "Marquette" compatible regulators. Solid brass threads and brass casings provide extra long life. The EZ drum mandrel makes sanding band changes easy; just pull, place and secure. The one-piece mandrel design simplifies the process of changing bands and makes it easy to sand flat surfaces and edges. Provides a quicker and easier alternative to using a traditional sanding mandrel. Allows for flat sanding and edge sanding. Compatible with all Dremel rotary tools. Compatible with all Dremel 1/2" sanding bands. Bit diameter 12.7 mm.
Black & Decker RT1022 Rotary Tool Accessory Kit Dremel SM540 Circular Saw Blade Bosch 687-01 Rotary Tool Bit Set
Universal system works on all rotary tools, including RTX and Wizard. Grinds, shapes and smooths most materials. Engraves most materials. Cuts nails, screws, bolts, chain, wire, pipe and closet maid shelving. Cuts most tiles and masonry materials such as wall tile, floor tile, porcelain, slate, stone and cement backer board. 3/4" cut depth. .075 wheel thickness. For use on SKU# 454.6933. Set contains: mandrel, (2) 1/2" felt polishing wheel, high-speed cutter, 1-1/4" fiberglass-reinforced cut-off wheel, aluminum oxide grinding stone, silicon carbide grinding stone, mandrel, nylon brush, (36) 409 15/16" emery cut-off wheel, 1/2" drum sander, 1/2" coarse sanding band, polishing compound, (2) 1/2" fine sanding band, (2) 1" felt polishing wheel and storage box. Applications: cutting, grinding, carving, engraving, shaping, sanding, cleaning and polishing..
POINT SET DIAMOND 20PC 1/8INCH TIP CUTTING OXY/ACET NUMBER 1 TIP CUTTING OXY/ACET NUMBER 2
20 piece set with assorted shapes and sizes of nickel bonded diamond points. 1/8" (3.18mm) shank. Excellent for deburring, etching and smoothing of glass, plastic, ceramics and metals. Max rpm: 30,000. "Harris" compatible oxy-acetylene cutting tip. Fits "Forney" 01687 torch kit and similar "Harris" compatible medium duty equipment. "Harris" compatible oxy-acetylene cutting tip. Fits "Forney" 01687 torch kit and similar "Harris" compatible medium duty equipment.
TIP CUTTING OXY/ACET MED NUM00 TIP CUTTING OXY/ACET MED NUM 0 TIP CUTTING OXY/ACET MED NUM 1
Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy duty shell end where the tip takes the mose abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines which cuts better, resists clogs and makes cleaning easier. Medium duty tips fit "Forney " 1680, 1702, 1705, 1707 and 1753 torch kits and "Victor" compatible equipment. Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy duty shell end where the tip takes the mose abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines which cuts better, resists clogs and makes cleaning easier. Medium duty tips fit "Forney " 1680, 1702, 1705, 1707 and 1753 torch kits and "Victor" compatible equipment. Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy duty shell end where the tip takes the mose abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines which cuts better, resists clogs and makes cleaning easier. Medium duty tips fit "Forney " 1680, 1702, 1705, 1707 and 1753 torch kits and "Victor" compatible equipment.
TIP CUTTING OXY/ACET MED NUM 2 TIP CUTTING OXY/ACET HD NUM 00 TIP CUTTING OXY/ACET HD NUM 0
Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy duty shell end where the tip takes the mose abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines which cuts better, resists clogs and makes cleaning easier. Medium duty tips fit "Forney " 1680, 1702, 1705, 1707 and 1753 torch kits and "Victor" compatible equipment. Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy duty shell end where the tip takes the mose abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines which cuts better, resists clogs and makes cleaning easier. Heavy duty tips fit "Forney " 1711 torch kit and similar "Victor" compatible equipment. Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy duty shell end where the tip takes the mose abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines which cuts better, resists clogs and makes cleaning easier. Heavy duty tips fit "Forney " 1711 torch kit and similar "Victor" compatible equipment.
TIP CUTTING OXY/ACET HD NUM 1 TIP CUTTING OXY/ACET HD NUM 2 HOLDER ELECTRODE 200 AMP
Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy duty shell end where the tip takes the mose abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines which cuts better, resists clogs and makes cleaning easier. Heavy duty tips fit "Forney " 1711 torch kit and similar "Victor" compatible equipment. Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy duty shell end where the tip takes the mose abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines which cuts better, resists clogs and makes cleaning easier. Heavy duty tips fit "Forney " 1711 torch kit and similar "Victor" compatible equipment. 8.5" (215.9mm) long brass body with fiberglass cover and trigger. Accepts up to #2 welding cable and 5/32" (3.97mm) electrodes. Provides excellent conductivity and durability. Insulated for safety and maximum operator protection. Grooved jaws allow electrodes to be used at different angles for greater comfort and efficiency.
Dremel A679-02 Sharpening Kit Dremel Saw-Max Dome Shaped Type 27A Flush Cut Wheel Dremel EZ Lock Mandrel Starter Kit
Guides help restore edge on garden tools, sharpens all lawn mower blades and sharpens dull, slow-cutting chain saw blades. Includes garden tool, lawn mower and chain saw sharpening attachment, gauge, spacers, wrench, (4) sharpening stones and instruction manual. Fits tool models 4000, 3000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 780, 770, and 7700. For making flush cuts on a variety of materials such as wood, laminate flooring, drywall, PVC and plastic. Dome-shaped. 3/4" cut depth. .075" wheel thickness. For use on SKU# 454.6933. For cutting metal.  One-piece mandrel design simplifies process of changing cutting wheels, eliminates the need for screw and screwdriver. Effortless locking and loading, no tiny mandrel to lose. Compatible with all Dremel rotary tools. Includes No.EZ402 Mandrel and (5) No.EZ456 cutting wheels. Color code red. Do not run in excess of 35,000 RPM.
Dremel A577 Rotary Detailers Grip Attachment Kit Dremel 543 Cutting Wheel Dremel EZ544 Cut-Off Wheel
Offers enhanced grip and comfort for detailed applications. Provides optimal tool control when precision is required. Repositions the weight of the tool into the palm of your hand for a balanced feel and less fatigue. Attaches onto a rotary tool in place of its nose piece for quick and easy installation. Includes detailer's grip attachment, engraving cutter, tracing stencil and instructions. For use all dremel tools. Powerful shaping tool that quickly and efficiently removes material. Easily creates compound curves and works on a variety of materials including woods, fiberglass, laminates, plastic and leather.o.Cuts and finishes in one operation. Use the edge of the wheel for cutting and slotting. Use the "face" of the wheel for shaping. Cuts 33 percent deeper than former cutting/shaping wheels up to 1/2". DO NOT USE ON METAL Use to cut 1/2" wood and laminate. Pull-twist-release accessory change. For use with the EZ402 EZ lock mandrel (SKU #482.4447).
Dremel 662DR Core Glass Drilling Bit Dremel 565 Cutting Guide Kit NOZZLE WELDER MIG MED DTY1/2IN
For use on glass, ceramic wall tile, glass block, glass bottles, and jewelry. For drilling in both flat and contoured surfaces. Diamond-impregnated cutting bit. Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed. Holes on the side of the bit allow the removal of material. Includes cutting oil and instructions. Provides controlled cuts in a variety of materials. Depth adjustment sets correct cutting depth up to 3/4". Easy screw-on mounting and large window provides excellent visibility. Specs: fits tool models 400, 398, 395, 300, 285, 275, 200, 100, 800 and 780. Includes: multipurpose cutting guide attachment, (2) drywall cutting bits, (1) multi purpose cutting bit and instructions. An orifice/bore gas concentration nozzle. Fits "Forney", "Tweco" and "Clarke" style MIG guns. Suitable for medium to heavy duty applications.
NOZZLE WELDER MIG MED DTY5/8IN PLUG HVYD MALE 230V 50A       RECEPTACLE WLL 230V 50A
An orifice/bore gas concentration nozzle. Fits "Forney", "Tweco" and "Clarke" style MIG guns. Suitable for medium to heavy duty applications. Heavy duty, vinyl pin-type design electrical plug with two brass blades and half pin. 30/50 Amp, 250 Volt capacity. Has extra blade to convert to 30 Amp plug. NEMA 6-30, 6-50. Heavy duty bakelite pin-type design wall electrical receptacle with 2-pole/3-wire grounding for surface mounting. 50 Amp, 125/250V capacity. NEMA 6-50.
Dremel 545 Abrasive Wheel Dremel 196 High Speed Cutter ROTARY TOOL V-SPEED W/ACC
Long lasting, does not break, will not lose it's shape. Coated with fine diamond particles, smooth fine cut. Hole design to minimize heat buildup. Applications: cutting, sawing, carving, sharpening and filing hard materials including marble, concrete, brick, porcelain, ceramics, hard epoxy, soft and hard wood. Includes: No. 402 mandrel. A versatile, high quality cutter made of high grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. Appropriate for curved surfaces. 7/32" bit diameter (5.6 mm). 1001 household, hobby and project uses: cut, saw, sand, grind, drill, polish, buff, sharpen, clean and more. Variable speed: 8000 - 30,000 rpm. 1/8" Collet accepts all standard rotary tool accessories. Separate on/off and speed control switches. Spindle lock for quick bit changes. Rated voltage: 120V/60 Hz, 1.0 Amp, No load speed: 8000 - 30,000 RPM, Collet size: 1/8". Weighs only 1.2 lbs. 40 piece accessory set includes: (10) aluminum oxide grinding stones, (7) cut-off wheels, (8) sanding discs, (1) aluminum oxide grinding wheel, (1) 1/2" sanding drum, (3) sanding bands, (2) felt polishing wheels, (3) engraving cutters, (2) mandrels, (1) 1/8" (3mm) drill bit, (1) dressing stone, (1) wrench and (1) accessory storage case.
PLUG ELEC CROWFOOT 30/50A 250V WHEEL EZ LOCK PREMIUM 1-1/2IN Dremel 194 High Speed Cutter
Heavy duty vinyl crowfoot-design electrical plug with three heavy duty brass blades. Has an extra blade to convert to 30A plug. NEMA 10-50, 10-30. Cutting wheel features a super abrasive grit called cubic boron nitride or CBN. CBN used on a cut-off wheel allows the wheel to remain sharp longer, stay cool and it won't shrink; wheels have constant diameter during use for a full range depth of cut. Lasts at least 20 times longer than our fiberglass reinforced cutting wheels based on internal testing. In addition, with the Dremel premium metal cutting wheel you'll spend less time changing wheels. Saves space storing replacement wheels and saves money buying replacement wheels. 35000 rpm. For use with the EZ402 EZ Lock Mandrel that makes accessory changes as easy as Pull - Twist - Release. 1-1/2" diameter; Kerf: 0.041". Blade Thickness: .40 A versatile, high-quality cutter made of high grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. 1/8" bit diameter (3.2 mm).
COUPLER AB BRASS OXY/ACETYLENE HOLDER ELECTRODE 300AMP M/DUTY Dremel EZ Lock Mini Polishing/Sanding Kit
Use to connect "A" size fittings to "B" size fittings. 8.5" (215.9mm) long brass body with fiberglass cover and trigger. Accepts up to #2 welding cable and 3/16" (4.76mm) electrodes. Provides excellent conductivity and durability. Insulated for safety and maximum operator protection. Grooved jaws allow electrodes to be used at different angles for greater comfort and efficiency. Includes (3) 180, 280, & 320 grit abrasive buffs, (2) 36 & 120 grit detail abrasive wheels, (1) cloth polishing wheel and polishing compound.
KIT EZ SANDING/GRINDING DREMEL Dremel 663DR Core Glass Drilling Bit Dremel EZ456B Cut-Off Wheel
Sharpen lawn tools, remove rust, sand a sticker, engrave glass, plus more. Contains 31 genuine Dremel accessories for most every sanding, smoothing, shaping or grinding need. Includes a reusable storage box with removable organizer tray. Kerf: 0.05"; Blade thickness: 0.05"; Grit: 60, 120, 180 and 220. Color code: Blue. For use on glass, ceramic wall tile, glass block, glass bottles, and jewelry. For drilling in both flat and contoured surfaces. Diamond-impregnated cutting bit. Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed. Holes on the side of the bit allow the removal of material. Includes cutting oil and instructions. Use to cut through metal. Pull-twist-release accessory change. Compatible with all Dremel rotary tools. For use with the EZ402 EZ lock mandrel (SKU #482.4447).
Dremel EZ Lock Mini Cutting Kit CUTTING SAW MULTI-PRPS KIT 7PC Dremel 568 Grout Removal Kit
Includes (4) 1-1/2" metal-cutting wheels, (3) 1-1/2" thin-cut wheels and (3) 1-1/2" plastic cutting-wheels. Use with either EZ402 (SKU #482.4447). Use to cut drywall, wood, plastic, metal, cement, brick, and more. Includes (7) genuine Dremel Saw-Max cutting wheels: (1) SM500 wood and plastic carbide wheel, (1) SM540 tile diamond wheel, (2) SM520 masonry cut-off wheels and (3) SM510 metal cut-off wheels. Attachments unique shape keeps the bit at the perfect cutting angle and keeps the cutting bit centered between the tiles, 30 degree cutting angle provides controlled cutting along the grout line. Special guides keep the bit centered between tiles. Large window for cut line visibility. Depth adjustment controls cutting depth up to 3/8" below the tile surface. Removes both wall and floor grout. Includes: grout removal attachment, 1/16" carbide grout removal bit and instructions.
Dremel 7000-N/5 2-Speed Rotary Tool Kit Dremel EZ Lock Abrasive Wheel Dremel 709-01 Super Accessory Kit
Ready to go on a minute's notice. This 2-speed cordless alkaline tool is ideal for a variety of do-it-yourself jobs inside or out. Includes 5 accessories and a wrench. Rotates at 2 speeds: 6,000 rpm or 12,000 rpm. Weighs only 6 ounces. Requires 4 AA batteries, Not Included. Cuts through metal. Pull-twist-release accessory change. Use with either EZ402 (SKU #482.4447). Versatile and reusable accessory kit includes everything you need to cut, grind, sand, polish, drill, sharpen and clean. Includes:  1-1/4" cut off wheel, 3/4" carbon steel brush, polishing compound, (4)-four-1" felt polishing wheel, silicon carbide grinding stone, high speed cutter, 1/2"/60 grit sanding drum with mandrel, 1/4"/60 grit sanding band with mandrel, mandrel, wrench, aluminum oxide grinding stone, silicon carbide grinding stone, aluminum oxide grinding stone, (12)-twelve-15/16" emery cut off wheel, (12)-twelve-15/16" heavy duty emery .-cut off wheel, 1-1/4" fiberglass reinforced cut off wheel, (4)-four-small felt wheel, cone polishing tip, (6)-six-1/2"/60 grit sanding band, (12)-twelve- 3/4" 180 grit sanding disc, (12)-twelve- 3/4"/220 grit sanding disc, (12)-twelve- 3/4"/.240 grit sanding disc, (6)-six-1/4"/60 grit sanding band, (6)-six-1/2"/120 grit sanding band, (6)-six- 1/4"/ 120 grit sanding band, mandrel, dressing stone, bristle brush and 180 grit abrasive buff.
Dremel Multipro Flexible Shaft KIT ROTARY ASSY DREMEL 130PC  SANDER PALM 1/4 SHEET
The flexible, 36" shaft attaches easily, new 5" bend radius provides more flexibility during use. Specs: comfort grip hand piece, integrated shaft lock button, Quick connect, accepts up to 1/8" shank accessories, works with collet system and the dremel chuck. Fits tool models 400, 398, 395, 300, 285, 275 and 800. Includes: flex shaft attachment, square drive nut and instructions Inside this accessory set are assorted bits for cutting, carving, engraving, grinding, drilling, sharpening, sanding, cleaning and polishing. The kit consists of regular cut off wheels, sanding bands, sandpaper discs, felt polishing wheels, carbon steel brush, aluminum oxide grinding stones, silicon carbide grinding stones, dressing stone, mandrels, wrench and a re-usable storage case. Palm grip for comfort and control. Dust protected on/off switch. Die-cast aluminum base for durability. Spring-loaded paper clamps. 10,000 OPM. Includes: Dust bag and sandpaper assortment.
Black & Decker QS900 Short Detail Corded Sander Skil 7292-02 Corded Sander Dremel 575 Right Angle Attachment
Compact size maximizes user control, multipurpose used for material removal and surface preparation, filtered dust collection, soft grip body, dust sealed switch. Specs: orbits/min 6,000 OPM. Includes: paper punch, (1) sheet sandpaper. Pressure control technology warns user when excessive pressure is applied, random orbit action for faster stock removal, pad brake creates a gouge-free finish, and micro filtration captures and contains fine dust particles, clear view dust canister, built in vacuum port. Specs: 120V/50-60 Hz, no load OPM 12,500, 5" pad. Includes: sander, clear view dust canister, (3) sandpaper sheets. Coupling system allows you to rotate the attachment on your tool making hard to reach areas instantly accessible with the Right Angle Attachment. Specs: ball bearings and spiral bevel gears, quick connect system no tools required, compact, long-lasting and versatile. Fits tool models 400, 398, 395, 300, 285, 275, 800 and 780. Includes: right angle attachment and instructions.
Dremel 670-01 Mini Saw Attachment HOSE OXY/ACET 1/4X25FT R-GRADE North American Tool 51832 Corded Rotary Tool Kit
Attaches to the rotary tool in seconds with Quick Connect System. Specs: makes clean, straight perpendicular cuts up to 1/4" thick, angled throat allows for straight, perpendicular cuts, clear housing for better visibility, directional guide and lower guard retracts when not in use. Includes: mini saw attachment, rip/crosscut blade, drive adapter and instruction manual. Suitable for use with oxygen-acetylene only. Red hose for acetylene. Green hose for oxygen. use with acetylene fuel gas only. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 minutes. Couple with one inch ferrules only. Includes standard "B" fittings. Specs: 10,000 - 32,000 rpm, 135 W, and 60 Hz. Includes 10 grinder stone, 2 diamond bits, 3 mandrel, 36 cutting disk, sanding drum, 3 sanding drum paper, 4 polishing wheel, 2 drill bits, collet, wet stone, 36 sanding paper and spanner.
KIT ACCESSORY ALL/PURP 160PC  SANDER ORBIT RANDOM 5INCH     Rockwell RC4151 Corded Finish Sander
Comes with re-usable storage case and 160 accessories. Lift out trays for easy organization of the included bits. This kit is ready for cutting, grinding, polishing, sanding, cleaning and more. The kit also includes sanding bands, sandpaper discs, polishing compound, felt polishing wheels, aluminum oxide grinding stone, silicone carbide grinding stone, mandrels, wire brush and wrench. A complete start-up kit offering a breadth of accessories helpful for a wide assortment of tasks. Rubberized palm grip for comfort and control. Powerful 2.2 amp motor. 12,000 orbits per minute and random orbit action for fast, swirl-free sanding. Hook and loop system for quick and easy paper changes. 5" pad with standard 8 hole pattern. Through-pad dust collection. Dust-protected on/off switch. Includes: dust bag and sanding disc assortment. Weighs 3 lbs. Aluminum base for exact flatness and long lasting durability, spring loaded paper clamps secure all types of paper, sealed rocker switch resists wear, soft grip handle. Specs: 120V/60Hz, no-load speed 12000 OPM, Base size is 4"x4-5/16", orbital diameter 1/16", weight 3.3 lbs. Includes: 10 ft. cord, (1) dust box, (1) dust extraction adapter, (3) sanding paper, (1) punch.
Black & Decker RTX 3-Speed Rotary Tool Kit With Case Skil 7492-02 Random Orbit Corded Sander SANDER RANDOM ORBITAL 2.4A
Gets the job done faster and won't bog down under load. Flip-Lock spindle lock for quick and easy accessory changes. Universal collet accepts all standard rotary tool accessories. Soft grip for no-slip comfort and control. Three speeds: 12,000 rpm. 24,000 rpm and 30,000 rpm for the best results for each job. Pressure control technology warns user when excessive pressure is applied, random orbit action for faster stock removal, pad brake creates a gouge-free finish, micro-filtration captures and contains fine dust, built-in vacuum port maximizes dust collection. Specs: no load OPM: 12,500, voltage: 120V. Includes: orbital sander, clear view dust canister, 3 sandpaper sheets. A compact design gives this 5" random orbit sander the ability to sand in tight spaces. A high-performance dust collection system keeps your workspace clean. Paddle switch for natural sander actuation. Ideal for sanding doors, refinishing table tops, building furniture and crafts.
Porter-Cable 380 Corded Sander Dremel 100-N/7 Corded Rotary Tool Kit WIRE WELD MILD MIG .024IN 10LB
Porous polyethylene dust canister exceeds durability of cloth dust bags, rubber top grip for comfort, top cap design allows users to service or clean out the unit quickly, dual dust ports accept 1" and 1-1/2" vacuum hoses. Specs: 120V/60Hz, orbits/min 14,000 OPM, 4-1/4"x4-1/2" pad size, paper size/type 1/4" sheet, orbit diameter: 1/16", 4.5"Lx12"Wx6"H, weight: 3.75 lbs. Includes: sander, paper punch, operating manual. Lightweight, single speed tool with ball bearing construction allow for cool running, quiet, smooth operation. Specs Cord length 6', speed 35,000 rpm, voltage 120 AC/50-60 Hz. Includes  Mandrel, coarse 1/2", sanding drum, dressing stone, heavy duty emery cut off wheel, 1/2" 120 grit sanding band, aluminum oxide grinding stone, silicon carbide grinding stone. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Yellow color coding on label. Required Shielding Gas: Argon/CO2. Recommended Polarity: DCEP Reverse Polarity. Tensile Strength (PSI): 70,000.
Dremel 220-01 Drill Press SANDER PALM 1/4 SHEET 3AMP    HEATING NOZZLE ROSEBUD 8-MFA-1
Dremel 220-01 Drill Press
Our Price: $48.87
Drill press, tool holder and flex shaft holder all in one, drills accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 16 and 29 inches. Specs: base 56 square inches, drill depth 2 inches, fits tool models 275, 285, 300, 395, 398, 400, 780 & 800. Includes: work station attachment, mounting wrench and instructions. 3 amp permanent magnet motor with 14,000 orbits per minute. Powerful, light weight motor produces dependable speed and power. Pad cushioning and break reduces swirl marks and ensures a smoother finish. Tactile rubber top and body grip surface and narrow sander body. Ergonomic design provides added comfort and control and reduces user fatigue from any angle. Large paper clamp tabs allows for effortless paper changes. Removable top allows for easy service and brush replacement. "Victor" compatible oxygen-acetylene heating tip. Size 8 (8-MFA-1). Fits "Forney" 1680, 1702, 1705 (sku #: 890.9442), 1707 and 1753 (sku #: 891.2776) torch kits and "Victor" compatible light and medium duty equipment.
HOSE OXT/ACET 1/4X50FT R-GRADE Makita BO4556K Corded Finish Sander Dewalt D26441K Corded Sander
Suitable for use with oxygen-acetylene only. Red hose for acetylene. Green hose for oxygen. use with acetylene fuel gas only. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 minutes. Couple with one inch ferrules only. Includes standard "B" fittings. Precision engineered all ball bearing construction for reduced vibration and noise, large clamping lever for quick and easy paper installation, through the pad dust collection system, conveniently located on/off switch, rubber sealed switch, contoured, rubberized palm grip. Specs: 120V, no load OPM 14,000, 4-1/2"x4" pad size, abrasive paper size is 4-1/2"x5-1/2", vibration (m/s2) 4.0, 5-1/8"Lx4-3/8"Wx5-9/16"H, weight 2.5 lbs. Includes: (1 each) abrasive Paper #60, #100, #150, dust bag, punch plate. Sealed 100 percent ball bearing construction provides longer life, dual plane, counter balanced low vibration, high capacity dust bag with built in vacuum adapter, dust sealed switch, textured anti slip top and body grip. Specs: orbits/min 14000 OPM, orbit diameter 1/16", 1/4 Sheet paper size/type, weight 3 lbs. Includes: dust bag with vacuum adapter, sandpaper punch, kit bag.
Porter-Cable 382 Random Orbit Corded Sander Dremel 200-1/21 Corded Rotary Tool Kit SANDER RANDOM ORBIT 2.2A 5IN
Porous polyethylene dust canister exceeds durability of cloth dust bags, rubber top grip for comfort, top cap design allows users to service or clean out the unit quickly, dual dust ports accept 1" and 1-1/2" vacuum hoses. Specs: orbits/min 12,000 OPM, 5", 8 hole pad, abrasive type hook & loop, 5"LX12"Wx6.25"H, weight 4.05 lbs. Includes: sander, operating manual. Multipurpose cutting guide attachment, used for multiple applications on a variety of materials. Specs: 15,000 or 35,000 RPM, voltage 120/AC, 50-60/Hz, 6 ft. cord. Includes: 21 genuine Dremel accessories. This single-speed palm random orbit sander/polisher delivers fast removal and a well-blended, ultra smooth finish, so woodworkers and finish carpenters can sand quickly and to exacting standards. Designed to eliminate swirl marks on the work piece thanks to an integral pad dampening braking system. Bosch's signature HookTight hook-and-loop disc attachment ensure firm grip of the disc during use. Additionally, the micro-cellular backing pad is pliable to ensure a smooth, fine finish on both flat and contoured surfaces alike. With a comfortable soft-grip top and body design, this 2.5 amp sander delivers 12,000 OPM for first class stock removal. It also includes an on-board system for filtering fine dust. Includes (1) sanding pad, (1) dampening ring, (1) micro filter dust canister, (1) vacuum hose adapter and (1) sanding disc.
HEATING NOZZLE HDUTY 8-MFA NO8 HOSE OXY/ACETYLENE 1/4INX25FT Dewalt D26451K Random Orbit Corded Sander
(8 MFA). Fits Forney 1711 torch kit and Victor compatible heavy duty equipment. Suitable for use with propane, propylene and MAPP gas. Features neoprene coating inside and out to resist corrosion from oil and petroleum-based fuel gases. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 minutes. Couple with one inch ferrules only. Includes standard "B" fittings. Textured anti slip top and body grip, maintains controllable pad speed and minimizes gouging during start up, dust sealed switch, sealed 100 percent ball bearing construction, high capacity dust bag with built in vacuum adapter, dual plane counter-balanced fan reduces user fatigue, accepts 5", 8 hole hook and loop paper. Specs: orbits/min 12,000 OPM, orbit diameter 3/32", CFS pad break, weight 2.9lbs. Includes: dust bag with vacuum adapter, kit box.
TORCH HANDLE OXY/ACET MED DUTY Dewalt D26450 Random Orbit Corded Sander Dremel 3000/300-1/24 Corded Rotary Tool Kit
Medium duty "Victor" compatible oxy-acetylene torch handle. Includes check valves. Two (2) stainless steel needle valves for fast accurate flame adjustment. Enhanced wall thickness provides strength and durability. No screws or soldered joints for enhanced durability and ease of maintenance. Made from tough extruded brass. Fits "Forney" 01680, 01705 (sku #: 890.9442) and 01707 torch kits. Accepts 5", 8-hole PSA (pressure sensitive adhesive) paper that allows sanding discs to be switched quickly and easily, textured anti slip top and body grip, maintains controllable pad speed and minimizes gouging during start up, dust sealed switch, sealed 100 percent ball bearing construction, high capacity dust bag with built in vacuum adapter, dual plane counter-balanced fan reduces user fatigue. Specs: orbits/min 12,000 OPM, orbit diameter 3/32", CFS pad break, weight 3.4lbs. Includes: dust bag with vacuum adapter. Lightweight, comfort grip housing with variable speed, circle cutter/straight edge guide. Specs: voltage 120/AC, 50-60/Hz, 5,000 to 35,000 RPM, 6 ft. cord. Includes: storage case and 24 accessories.
Makita BO5030K Random Orbit Corded Sander Dremel 8000-03 Cordless Rotary Tool Kit SANDER PALM RANDOM ORBIT 5IN
Oversized sealed-ball bearing construction, random orbit action for fast and super smooth sanding, pad control system for controlled pad speed upon start up, through the pad dust collection system, dust sealed switch, rubberized grip, uses quick-change 5" (8-hole) hook-and-loop abrasive paper. Specs: 120V no load OPM 12,000, orbit diameter 1/8", 4-13/16" pad size, abrasive disc size 5", 6"Lx4-7/8"Wx6"H, weight 2.9 lbs. Includes: (1) abrasive disc, dust bag, plastic case. 8 volt Lithium-Ion cordless rotary tool is ideal for hands on projects around the home such as finishing, intricate sanding, polishing, cleaning, engraving and more. Variable speed control allows you to set the speed of the tool to match a particular accessory to the task at hand and is designed to be used with all Dremel accessories and most threaded attachments. Variable speed from 5,000 to 33,000 rpm to match the proper speed required. High capacity battery for longer run time. Comfort grip housing for easier handling and better tool control. Includes: 401 Mandrel, 402 Mandrel, 403 Bristle brush, 407 1/2" Drum sander, 414 Felt polishing wheel (2), 421 Polishing compound, 445 1/2" 240 Grit sanding band (2), 408 1/2" 60 Grit sanding band (3), 432 1/2" 120 Grit sanding band (3), 540 1-1/4" Cut-off wheel (3), 84922 Silicon carbide grinding stone, 932 Aluminum oxide grinding stone, 952 Aluminum oxide grinding stone and wrench. Features variable speeds of 7,000-12,000 OPM, so you can match the speed to the application. Its 3 amp permanent magnet motor produces dependable speed and power. Electronic soft start controls start up speed to eliminate swirl marks. Use this sander to achieve a fine, swirl-free finish on anything on which you're working. For maximum compatibility, the universal hose adapter allows for connections from all vacuum hose sizes. The plastic dust canister with filter provides efficient dust collection and increased durability. Anti-vibration design provides ultimate comfort and control during use. Plastic canister with filter provides efficient dust collection. Universal hook and loop and PSA Pad system that accepts both types of 5" sanding discs.
SANDER RANDOM ORBITAL 5IN 3A  Bosch ROS20VSK Random Orbit Corded Sander REGULATOR ARGON/CO2 KIT MIG
3.0 amp motor that spins the pad at 8,000 - 12,000 opm. Shorter height allows the user to get closer to the work piece for sanding. Rubber over-mold in all of the critical areas of the sander. Separate counterweight design reduces vibration for improved comfort. Improved dust-sealed switch to protect against dust ingestion for longer switch life. Improved dust collection and interfacing with vacuum locking system. Dust bag has one-hand locking system. Tool weighs only 2.9 lbs. Includes: Sander, dust bag, owners' card and carrying bag. Variable speed dial, twist off dust canister shows dust level and easily detaches, micro filter system for filtering fine dust, hook-tight hook-&-loop disc attachment with over 35,000 long-life hooks ensure firm grip of disc, combination of pad orbit and rotation delivers well blended, ultra-smooth finish, microcellular backing pad for a smooth, fine finish on flat or contoured surfaces, integral pad dampening system prevents swirl marks, soft palm grip top and body, low vibration, anti spillback dust canister, uses industry-standard 8-hole 5" hook-&-loop discs. Specs: 120V AC, orbits/min 7,500-12,000 OPM, 3/32" orbit diameter , 5"Wx6"Hx9"L, 5" disc, weight 3.5 lbs.. Includes soft sanding pad, micro filter dust canister, vacuum hose adapter, sanding disc, carrying case. Designed for light and medium MIG and TIG applications to provide accurate flow of gas. Dual scale gauge with impact resistant polycarbonate lens and machined brass body for maximum durability. Includes adapter for 5/32" (4mm) gas hose.
REGULATOR ACETYLENE MED DUTY  CUTTING ATTACHMENT MED DUTY   TORCH HANDLE OXY/ACET HD 315
"Verstile Victor" compatible oxygen regulator for meduim duty applications. Forged brass bodies and bonnets for maximum strength. Sintered (heat-treated) metal inlet filter to trap impurities. Pressed, not soldered, joints for easy maintenance. Easy to read dual scale gauges with nearly unbreakable screw-on-lenses. Includes a safety relief valve for safe operation. Included in "Forney" 01705 (sku #: 890.9442), "Shop Flame II" and 01707 "Deluxe" Oxy-Acetylene Welding Kits. Medium duty "Victor" compatible oxy-acetylene cutting attachment. Double o-ring seal for quick, leak-free, hand-tight connections. Head and body are made from forged brass for longer life. Fits "Forney" 01680, 01705 (sku #: 890.9442) and 01707 torch kits. Includes check valves. Two stainless steel needle valves for fast accurate flame adjustment. Enhanced wall thickness provides strength and durability. No screws or soldered joints for enhanced durability and ease of maintenance. Made from tough extruded brass. Fits Forney 01711 torch kit. Victor compatible.
Dremel 4000-2/30 Corded Rotary Tool Kit REGULATOR OXYGEN MED DUTY     HOSE OXY/ACETYLENE 1/4INX50FT
Variable speed for greater versatility. High performance motor for maximum performance at all speeds. Electronic feedback for consistent speed under load. Can be used with all Dremel accessories and attachments. Specs: Cord length 6', speed 5,000 to 35,000 rpm, voltage 120 AC/50-60 Hz, weight 18.8 oz. Includes: Dremel 4000 rotary tool, circle cutter/straight edge guide, sanding/grinding guide, storage case, quick start book. "Verstile Victor" compatible oxygen regulator for meduim duty applications. Forged brass bodies and bonnets for maximum strength. Sintered (heat-treated) metal inlet filter to trap impurities. Pressed, not soldered, joints for easy maintenance. Easy to read dual scale gauges with nearly unbreakable screw-on-lenses. Includes a safety relief valve for safe operation. Included in "Forney" 01705 (sku #: 890.9442), "Shop Flame II" and 01707 "Deluxe" Oxy-Acetylene Welding Kits. Suitable for use with propane, propylene and MAPP gas. Features neoprene coating inside and out to resist corrosion from oil and petroleum-based fuel gases. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 minutes. Couple with one inch ferrules only. Includes standard "B" fittings.
SANDER ORBIT RANDOM 18V 5IN   CUTTING ATTACH OXY/ACET CA2460 ROTARY TOOL VARIBLE SPEED
ROTARY TOOL VARIBLE SPEED
Our Price: $114.60
3-Speed settings (7,000/9,500/11,000 OPM) engineered for faster material removal. Large 1/8" random orbit action engineered for fast sanding and swirl-free finish. One-touch electronic speed control switch provides fast, medium and low settings. Ergonomically designed body and grip for increased operator comfort. Pad brake engineered for reduced free-spin and improved overall finish. Pad control system for controlled pad speed upon start-up. Efficient through-the-pad dust collection system for a cleaner work environment. Dust-sealed switch and bearing for longer tool life. Uses quick-change 5" (8-hole) hook-and-loop abrasive paper. Oversized sealed-ball bearing for longer tool life. Includes: (1) Dust Bag and (1) 5" Round Abrasive Disc. Victor compatible. Double o-ring seal for quick, leak-free, hand-tight connections. Head and body are made from forged brass for longer life. Fits Forney 01711 torch kit. Allows tool-less and collet-less accessory changes with the inclusion of the three jaw chuck. The chuck accepts all Dremel accessory shank sizes for fast and convenient accessory changes without ever using a wrench. Featuring the all new Pivot Light, your projects are will lit with an optimum line of sight since the light pivots to direct illumination where you want it. Variable speed and electronic feedback circuitry. The slim, ergonomic body design provides a comfortable 360 degree grip zone no matter how you hold it for extended ease of use. The completely redesigned air flow system lets the Dremel 4300 run cool, quiet and smooth so completing projects are more enjoyable than ever. 6' cord. Variable speed: 5,000 - 35,000 rpm.
Milwaukee 2460-21 M12 Cordless Rotary Tool Kits REGULATOR ACETYLEN 2-1/2IN 450 REGULATOR OXYGEN 2-1/2IN 450
Compact and lightweight. Tool runs from 5,000-32,000 RPM. Managed by a variable speed dial for fluid control. 1/8" Collet is compatible with all 1/32" - 1/8" shank accessories providing the user access to any cutting, grinding, sanding and polishing solutions. Includes rotary tool, M12 Redlithium battery, 5 cutting wheels and mandrel, wrench and 30-minute charger and carrying case. Forged brass bodies and bonnets for maximum strength. Sintered (heat-treated) metal inlet filter to trap impurities. Pressed, not soldered, joints for easy maintenance. Easy to read dual scale gauges with nearly unbreakable screw-on lenses. Victor compatible. Forged brass bodies and bonnets for maximum strength. Sintered (heat-treated) metal inlet filter to trap impurities. Pressed, not soldered, joints for easy maintenance. Easy to read dual scale gauges with nearly unbreakable screw-on lenses. Includes a safety relief valve for safe operation.Victor compatible.
Porter-Cable 7345 Random Orbit Corded Sander Dremel 4000-6/50 Corded Rotary Tool Kit Bosch 3725DEVS Random Orbit Corded Sander
Electronic variable speed dial, 100 percent ball and roller bearing construction, PSA (pressure sensitive adhesive) pads, includes 5" proprietary counter balance for use with 5" sanding/polishing pad, accepts 5/16-24 spindle thread accessories, features two-position (left or right) removable side handle. Specs: 120 V/AC only,60 Hz orbits/min 2,500-6,800 OPM, 5" no hole pad, 11"Lx10"Wx6"H, weight 5.5 lbs. Variable speed rotary tool with a slim, ergonomic body provides a 360-degree grip zone for comfort and control in any grip position. Tool can use all existing Dremel accessories and attachments plus high-performance attachments to complete the widest range of projects. Specs: Amperage 1.6 amps, Cord Length 6 ft., Speed 5,000 to 35,000 RPM, Voltage 120 AC, 50-60 Hz,Weight (lbs.) 18.8 oz. Includes: 50 assorted accessories Variable speed dial, multi-purpose sander with pad that both orbits and rotates, soft start, constant response circuitry provides overload protection, soft microcellular backing pad conforms to contours, integral pad dampening system helps prevent swirl marks, die cast aluminum gear housing with exclusive dual bearing pad mount eliminates wobble and vibration, micro filter dust canister with integrated paper filter, through the pad dust extraction, micro filter dust canister with integrated paper filter, tapered soft-grip top, ergonomic handles, multiple grip positions, trigger with lock-on button, uses 8-Hole 5" hook and loop discs. Specs: 120V, no load OPM 4,500-12,000, 5" disc size, 3/32" eccentric offset, 5.25"Hx12"L, eight 5.1 lbs. Includes: 5mm hex pad wrench, soft backing pad, (1) sanding disc, micro filter dust canister.
M18 RANDOM ORBIT SANDER KIT   WELDING CABLE 1/0GA 50FT REEL WELDING CABLE 4GA 125FT REEL
M18 5? Random Orbit Sander delivers 12,000 Max OPM output. 7,000-12,000 variable speed dial allows more control over the output of the tool to match the orbit speed for the application. Powerful motor allows the removal of more material per battery charge. Delivers up to 35 minutes of run-time on a M18 3.0Ah battery pack. Includes: M18 Orbit Sander Kit, dust canister, universal hose adapter, extension adapter, (2) 80 grit sandpaper, M18 Red Lithium XC extended capacity battery, multi-voltage charger, and contractor bag. Highly flexible cable manufactured with 1,007 strands of fully annealed soft-drawn copper. Uses paper separator between copper and outer EPDM jacket. Will not kink, even in cold weather. Outer jacket has excellent oil, grease, water, flame, tear, cut and abrasion resistance. Rated at 600 volts. Conductor temperature range of -58? F (-50? C) to 221? F (105? C). Meets or exceeds ASTMB-172. 50' (15.24m) reel. #4 gauge highly flexible welding cable manufactured with 378 strands of fully annealed soft-drawn copper. Uses paper separator between copper and outer EPDM jacket. Will not kink, even in cold weather. Outer jacket has excellent oil, grease, water, flame, tear, cut and abrasion resistance. Rated at 600 volts.Conductor temperature range of -58? F (-50? C) to 221? F (105? C). Meets or exceeds ASTMB-172.
WELDING KIT OXY/ACET MED DUTY TORCH OXY/ACET MED DUTY KIT   WELDING CABLE 2GA 125FT REEL
"Victor" compatible medium duty oxy-acetylene welding kit. Welds up to 3/8" (9.52mm) and cuts up to 6" (152.4mm). Provided with check valves for safety. Has 3/16" (4.76mm) x 20' (6.1m) T-grade hose. Ideal for maintenance, fabrication, plumbing and do-it yourselfers. Kit includes: Oxygen Regulator (SKU #: 891.2677); Acetylene Regulator (SKU # 891.2685); Torch Handle (SKU # 891.2701); Cutting Attachment (SKU # 891.2693); Goggles (SKU # 891.0036); Flint Lighter (SKU # 891.2586); T-Grade Hose (SKU # 891.5373); Cutting Tip #0 (SKU # 891.0812); Welding Tip #0 (Forney #87822); Check Valves (Forney #87151). "Victor" compatible lightweight torch kit that welds up to 1/2" (12.7mm) and cuts up to 4" (101.6mm); ideal for auto repair, plumbing, refrigeration, metal art, general and industrial maintenance; easy to store and can be carried from job-to-job; all accessories fit comfortably in a light sturdy plastic tote; all tanks are shipped empty per DOT regulations. Kit includes: Oxygen Regulator (Forney #86230); Acetylene Regulator (Forney #86229); Torch Handle (sku # 891.2701); Cutting Attachment (sku # 891.2693); Goggles (sku # 891.0036); Flint Lighter (sku # 891.2586); T-Grade Hose (sku # 891.5373); Cutting Tip #0 (sku #891.0812); Welding Tip #0 (Forney #82822); Oxygen Cylinder (Forney #86224); Acetylene Cylinder (Forney #86228); Check Valves (Forney #87151); Plastic Tote (Forney #86221). #2 gauge highly flexible welding cable manufactured with 636 strands of fully annealed soft-drawn copper. Uses paper separator between copper and outer EPDM jacket. Will not kink, even in cold weather. Outer jacket has excellent oil, grease, water, flame, tear, cut and abrasion resistance. Rated at 600 volts. Conductor temperature range of -58? F (-50? C) to 221? F (105? C). Meets or exceeds ASTMB-172.
CUTTER PLASMA 20 P            WELDING KIT OXY/ACETYLENE HD  Porter-Cable 7800 Drywall Corded Sander
CUTTER PLASMA 20 P
Our Price: $370.19
Cuts up to 1/4 in. of mild steel. "Victor" compatible heavy duty oxy-acetylene welding kit. Welds up to 1/2" (12.7mm) and cuts up to 8" (203.2mm). Provided with check valves for safety and includes a 1/4" (6.35mm) x 20' (6.1m) T-Grade hose. Ideal for maintenance, fabrication, plumbing and do-it-yourselfers. Provides high performance at a very economical price. Kit includes: Oxygen Regulator (SKU # 891.5399); Acetylene Regulator (SKU # 891.5415); Torch Handle (SKU # 891.5431); Cutting Attachment (SKU # 891.5464); Goggles (SKU # 891.0036); Flint Lighter (SKU # 891.2586); T-Grade Hose (Forney # 86164); Cutting Tip #1 (SKU # 891.0887); Welding Tip #1 (Forney # 87833); Welding Tip #3 (Forney # 87835); Welding Tip #5 (Special Order only); Rosebud Tip #8 (SKU # 891.5472); Check Valves (Forney # 87151); Tip Cleaner (SKU # 891.2610). Vacuum not included. Variable speed, built-in dust collection hose, 1 1/4" vacuum hose is 13 ft. long so that large areas can be sanded in one set up. Specs: 120V/AC, 60Hz, 4.7 Amp (AC only), 1,400-2,000 RPM, weight 8 1/2 lbs, 8 7/8" pad size, foam-Backed pad, compression type pad. Includes: sander, sanding pad, 13' static dissipating 1-1/4" vacuum hose, hook & loop straps for mounting power cord to vacuum hose, instruction manual.
CUTTER PLASMA W/AIR 120V 12A
Uses an electrical arc and compressed air to cut steel, aluminum and other conductive metals. Drag Torch technology allows you to move (drag) the torch directly across the metal surface for more precise cuts with or without a template. Designed to cut up to 1/8" (3.18mm) mild steel (excels at cutting sheet metal). Can sever up to 1/4" (6.35mm) steel. Uses standard household 115 VAC current. Includes Torch with 13.2' (4m) lead; 13.2' (4m) Ground Cable with 200 Amp Ground Clamps; and 7.4' (2.25m) Input Power Cable with 15 Amp NEMA 5-15P Plug. Plasma Cutter comes with a built-in piston driven compressor and lightweight inverter power supply; Thermal Overload Protection (rated for 35% duty cycle at 104 degrees F (40 degrees C)); Three (3) Diagnostic LED lights (power, temperature, & torch energized/ready to work); and Post-Flow air cooling (cools torch and tip after cutting). CSA certified. Specifications: Input: 120 VAC; 60 HZ; 12 Amp; 1-Phase; Output (Fixed): 25% @ 12 Amp; Absorbed Power: 22.5 Amps; Weight: 35 Lbs. (15.88Kg).
   
 
1