|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement 2" (50.8mm) x 4-1/4" (107.95mm) welding helmet cover lens. High quality material offers superior protection from dust, weld spatter and impact. Meets ANSI Z87.1 safety standards. Fits "Forney" 55663 ("Slim Line"), 55666 (sku # 891.0069) and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening.
|
Replacement 2" (50.8mm) x 4-1/4" (107.95mm) welding helmet cover lens. High quality material offers superior protection from dust, weld spatter and impact. Meets ANSI Z87.1 safety standards. Fits "Forney" 55663 ("Slim Line"), 55666 (sku # 891.0069) and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening.
|
Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened welding lens. Meets ANSI Z87.1 safety standards. Fits "Forney" 55663 ("Slim Line"), 55666 (sku # 891.0069) and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening. UV/IR protection.
|
Hardened welding lens. Meets ANSI Z87.1 safety standards. Fits "Forney" 55663 ("Slim Line"), 55666 (sku # 891.0069) and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening. UV/IR protection.
|
Hardened welding lens. Meets ANSI Z87.1 safety standards. Fits "Forney" 55663 ("Slim Line"), 55666 (sku # 891.0069) and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening. UV/IR protection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened welding lens. Meets ANSI Z87.1 safety standards. Fits "Forney" 55663 ("Slim Line"), 55666 (sku # 891.0069) and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening. UV/IR protection.
|
Replacement 2" x 4-1/4". Meets ANSI Z87.1 Safety Standards. Fits Forney 55663 ("Slim Line"), 55666 ("Bandit I"), and 55680 ("Super Slim") welding helmets and most brand name helmets. UV/IR protection.
|
High quality material offers superior protection from dust, weld spatter and impact. Meets ANSI Z87.1 Safety Standards. Fits Forney 55647 ("Patriot"), 55669 ("Finish Line"), 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4" (6.35mm) x 5" (127mm) round soapstone pencil refill. Uniform texture and size. Won't contaminate welds. For "Forney" 70806 and 70807 (sku # 891.1166).
|
3/16" (4.76mm) x 1/2" (12.7mm) x 5" (127mm) flat soapstone pencil refill. Uniform texture and size. Won't contaminate welds. For "Forney" 70802 (sku # 891.1158).
|
With Oatey silver solder powder added to pre-tin copper pipes. Cleans, fluxes and tins. Lead free, can be used on potable water systems. For clean sweat copper fittings, no pre-cleaning needed. Do not use on electrical parts. Formulated with the same quality as Oatey No.5 flux. Will work for large diameter copper and does not turn copper green. Can never burn out.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7-1/4" Polypropylene handle; Made in the U.S.A.
|
7-1/4" Polypropylene handle; Made in the U.S.A.
|
7-1/4" Polypropylene handle; Made in the U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement 2" x 4-1/4". Meets ANSI Z87.1 Safety Standards. Fits Forney 55663 ("Slim Line"), 55666 ("Bandit I"), and 55680 ("Super Slim") welding helmets and most brand name helmets. UV/IR protection.
|
Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2.
|
Tube brush with wire loop-end handle. Single stem/single spiral with .005" (.127mm) nylon bristles. Ideal for cleaning bottles, carburetors, brake cylinders, radiator hoses, engine blocks, blocked hoses, drains, etc.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lead free, high quality flux containing powdered solder which provides added insurance for a leak free joint. For use with 95/5, 60/40, 50/50, and 40/60 solders.
|
Standard duty copper-plated battery clamps. Includes positive and negative clamps. Accepts up to #8 gauge cable. Heavy duty construction and easy grip handles.
|
Carefully manufactured for sound, solid connections and trouble-free service. Easily crimped or swaged. Made from electrolytic copper rated for 100% conductivity. Carded 2-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carefully manufactured for sound, solid connections and trouble-free service. Easily crimped or swaged. Made from electrolytic copper rated for 100% conductivity. Carded 2-pack.
|
Creamy, smooth paste formulated to meet ASTM B-813 specifications. Water washable, so it can be flushed from the piping system to limit corrosion. Lead-free and may be used with all types of soft solder including 95/5, 60/40, 50/50 and 40/60 solders. Will not run or drip off acid brushes, pipes and fittings during application. Superior wetting ability allows solder to flow easily and uniformly into joints. Pre-cleans and resists splattering. Conforms to ASTM B-813 specifications.
|
Replacement flints for single flint striker. Fits "Forney" 86102 (sku #: 891.2586) and all standard screw-on type lighters. 5-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement for Forney 70500 Chipping Hammer. Sturdy, high quality, carbon steel wire brush set in hardwood with hang hole. 4-3/4" (120.65mm) overall length (OAL) x 7/8" (22.22mm ) block x .014" (.36mm) carbon steel wire in 3 x 15 rows.
|
Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder.
|
Carefully manufactured for sound, solid connections and trouble-free service. Easily crimped or swaged. Made from electrolytic copper rated for 100% conductivity. Carded 2-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carefully manufactured for sound, solid connections and trouble-free service. Easily crimped or swaged. Made from electrolytic copper rated for 100% conductivity. Carded 2-pack.
|
With Oatey silver solder powder added to pre-tin copper pipes. Cleans, fluxes and tins. Lead free, can be used on potable water systems. For clean sweat copper fittings, no pre-cleaning needed. Do not use on electrical parts. Formulated with the same quality as Oatey No.5 flux. Will work for large diameter copper and does not turn copper green. Can never burn out.
|
Cleans, removes oxidation, makes solder flow smoothly. Works with all solid wire solders. White paste with low odor. For potable plumbing, copper fire sprinkler and hydronic heating systems. Meets ASTM B-813 standard. IAPMO listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ruggedly constructed flat steel soapstone holder comes with a channel case design and convenient spring pocket clip. Easily indexable and smooth operating; this holder is designed for one-handed operation; to adjust soapstone length, simply press brass trigger with thumb and index to the next positive stop. Fewer working parts and more usable soapstone. Proven and superior design features that are widely used and preferred in the welding industry.
|
Strong and durable with solidly imbedded bristles. Will not rust. Long wood handle with pre-drilled hang hole. Ideal for general purpose cleaning and excellent for cleaning stainless steel. Features .006" (.15mm) brass wire in 3 x 7 rows.
|
Intense, highly visible, quick drying colors are water and weather resistant. Precision valve regulates paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes 10cc's of paint.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For permanent marking on most surfaces. Intense, highly visible, quick drying colors are water and weather resistant. Precision valve regulates paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes 10cc's of paint. Bulk.
|
For permanent marking on most surfaces. Intense, highly visible, quick drying colors are water and weather resistant. Precision valve regulates paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes 10cc's of paint. Bulk.
|
For permanent marking on most surfaces. Intense, highly visible, quick drying colors are water and weather resistant. Precision valve regulates paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes 10cc's of paint. Bulk.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For permanent marking on most surfaces. Intense, highly visible, quick drying colors are water and weather resistant. Precision valve regulates paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes 10cc's of paint. Bulk.
|
Intense, highly visible, quick drying colors are water and weather resistant. Precision valve regulates paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes 10cc's of paint.
|
Features high impact scratch resistant polycarbonate lenses and non-slip temples. Provides 99.9% UV protection. Meets ANSI Z87.1+safety standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Small, strong and durable with solidly imbedded bristles; 7-1/4" (184.1mm) long plastic handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Features .006" (.15mm) wire in 3 x 7 rows.
|
Small, strong and durable with solidly imbedded bristles; 7-1/4" (184.1mm) long plastic handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Features .006" (.15mm) wire in 3 x 7 rows.
|
Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features a square hood and round file with a patented assembly.
|
Carefully manufactured for sound, solid connections and trouble-free service. Easily crimped or swaged. Made from electrolytic copper rated for 100% conductivity. Carded 2-pack.
|
Carefully manufactured for sound, solid connections and trouble-free service. Easily crimped or swaged. Made from electrolytic copper rated for 100% conductivity. Carded 2-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Constructed with an inner sleeve collet to separate the soapstone for maximum grip and protection. Slim line brass holder with a convenient deluxe pocket clip. Easily adjustable.
|
Carefully manufactured for sound, solid connections and trouble-free service. Easily crimped or swaged. Made from electrolytic copper rated for 100% conductivity. Carded 2-pack.
|
Strong and durable with solidly imbedded stainless steel (SS) bristles. Long curved wood handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Angled head design eliminates cut and bruised knuckles. Features .006" (.15mm) diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes four (4) replacement triangles for a total of 12 flints.
|
Replacement lens. Meets ANSI Z87.1 safety standards. Fits "Forney" 55647 ("Patriot"), 55669 ("Finish Line", 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets using a 5-1/4" (133.35mm) x 4-1/2" (114.3mm) window opening. UV/IR protection.
|
Replacement lens. Meets ANSI Z87.1 safety standards. Fits "Forney" 55647 ("Patriot"), 55669 ("Finish Line", 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets using a 5-1/4" (133.35mm) x 4-1/2" (114.3mm) window opening. UV/IR protection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Lens, 5-1/4" x 4-1/2". Meets ANSI Z87.1 Safety Standards. Fits Forney 55647 ("Patriot"), 55669 ("Finish Line"), 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets. UV/IR protection.
|
For permanent marking on most surfaces. Intense, highly visible, quick drying colors are water and weather resistant. Precision valve regulates paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes 10cc's of paint. Carded.
|
For permanent marking on most surfaces. Intense, highly visible, quick drying colors are water and weather resistant. Precision valve regulates paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes 10cc's of paint. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For permanent marking on most surfaces. Intense, highly visible, quick drying colors are water and weather resistant. Precision valve regulates paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes 10cc's of paint. Carded.
|
General uses: repairs, steels, cast iron, copper base metals, galvanized and malleable irons.
|
General uses: join carbon and alloy steels; join most different metals; stainless steel; cast iron; nickel; brass.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
General uses: joins copper to copper; refrigeration; electrical; plumbing.
|
Tube brush with wire loop-end handle. Single stem/single spiral with .005" (.127mm) nylon bristles. Ideal for cleaning bottles, carburetors, brake cylinders, radiator hoses, engine blocks, blocked hoses, drains, etc.
|
Carefully manufactured for sound, solid connections and trouble-free service. Easily crimped or swaged. Made from electrolytic copper rated for 100% conductivity. Carded 2-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carefully manufactured for sound, solid connections and trouble-free service. Easily crimped or swaged. Made from electrolytic copper rated for 100% conductivity. Carded 2-pack.
|
Replacement shade 2" (50.8mm) x 4-1/4" (107.95mm). For prolonged periods of welding and/or to see true flame arc and puddle color. The gold coating reflects 90% of radiated heat for cooler operation and less eye fatigue. Provides UV/IR protection. Meets ANSI Z87.1 Safety Standards. Fits Forney 55663 ("Slim Line"), 55666 ("Bandit I"), and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening.
|
Replacement shade 2" (50.8mm) x 4-1/4" (107.95mm). For prolonged periods of welding and/or to see true flame arc and puddle color. The gold coating reflects 90% of radiated heat for cooler operation and less eye fatigue. Provides UV/IR protection. Meets ANSI Z87.1 Safety Standards. Fits Forney 55663 ("Slim Line"), 55666 ("Bandit I"), and 55680 ("Super Slim") welding helmets and most brand name helmets using a 2" (50.8mm) x 4-1/4" (107.95mm) window opening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tube brush with wire loop-end handle. Single stem/single spiral with .005" (.127mm) nylon bristles. Ideal for cleaning bottles, carburetors, brake cylinders, radiator hoses, engine blocks, blocked hoses, drains, etc.
|
Strong and durable with solidly imbedded bristles. Will not rust. Long wood handle with pre-drilled hang hole. Ideal for general purpose cleaning and excellent for cleaning stainless steel. Features .006" (.15mm) brass wire in 3 x 7 rows.
|
Quality tool with a rugged frame and three (3) large flints. Long lasting round file and bright plated finish. Dependable ignition under all working conditions. Release slotted screw to rotate fresh flint into position.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For indoor or outdoor holiday decorating, announcing special events, advertising vehicles for sale, and many other uses. Use on glass, metal, and most other non-porous surfaces. Vibrant color, weather resistant, dries quickly, and removes easily. To remove paint, spray with an all-purpose cleaner, briefly soak, and rub vigorously with a wet cloth or paper towel. Use only as directed. Not intended for use on clothing, convertibles or car paint, rubber, textiles, paper, and other porous surfaces. May stain clothing. Made in USA. Bulk.
|
For indoor or outdoor holiday decorating, announcing special events, advertising vehicles for sale, and many other uses. Use on glass, metal, and most other non-porous surfaces. Vibrant color, weather resistant, dries quickly, and removes easily. To remove paint, spray with an all-purpose cleaner, briefly soak, and rub vigorously with a wet cloth or paper towel. Use only as directed. Not intended for use on clothing, convertibles or car paint, rubber, textiles, paper, and other porous surfaces. May stain clothing. Made in USA. Bulk.
|
For indoor or outdoor holiday decorating, announcing special events, advertising vehicles for sale, and many other uses. Use on glass, metal, and most other non-porous surfaces. Vibrant color, weather resistant, dries quickly, and removes easily. To remove paint, spray with an all-purpose cleaner, briefly soak, and rub vigorously with a wet cloth or paper towel. Use only as directed. Not intended for use on clothing, convertibles or car paint, rubber, textiles, paper, and other porous surfaces. May stain clothing. Made in USA. Bulk.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For indoor or outdoor holiday decorating, announcing special events, advertising vehicles for sale, and many other uses. Use on glass, metal, and most other non-porous surfaces. Vibrant color, weather resistant, dries quickly, and removes easily. To remove paint, spray with an all-purpose cleaner, briefly soak, and rub vigorously with a wet cloth or paper towel. Use only as directed. Not intended for use on clothing, convertibles or car paint, rubber, textiles, paper, and other porous surfaces. May stain clothing. Made in USA. Bulk.
|
For indoor or outdoor holiday decorating, announcing special events, advertising vehicles for sale, and many other uses. Use on glass, metal, and most other non-porous surfaces. Vibrant color, weather resistant, dries quickly, and removes easily. To remove paint, spray with an all-purpose cleaner, briefly soak, and rub vigorously with a wet cloth or paper towel. Use only as directed. Not intended for use on clothing, convertibles or car paint, rubber, textiles, paper, and other porous surfaces. May stain clothing. Made in USA. Bulk.
|
For indoor or outdoor holiday decorating, announcing special events, advertising vehicles for sale, and many other uses. Use on glass, metal, and most other non-porous surfaces. Vibrant color, weather resistant, dries quickly, and removes easily. To remove paint, spray with an all-purpose cleaner, briefly soak, and rub vigorously with a wet cloth or paper towel. Use only as directed. Not intended for use on clothing, convertibles or car paint, rubber, textiles, paper, and other porous surfaces. May stain clothing. Made in USA. Bulk.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Strong and durable with solidly imbedded brass bristles. Will not rust. Long curved wood handle with pre-drilled hang hole. Ideal for general purpose cleaning and excellent for finish or delicate cleaning of stainless or polished steel. Angle head design eliminates cut or bruised knuckles. Features .006" (.15mm) brass wire in 2 x 9 rows.
|
Strong and durable with solidly imbedded carbon steel (CS) bristles. Curved wood handle with pre-drilled hang hole. Ideal for aggressive cleaning and removing rust and paint from most surfaces. Angled head design eliminates cut and bruised knuckles. Feature .014" (.36mm) CS wire.
|
Carefully manufactured for sound, solid connections and trouble-free service. Easily crimped or swaged. Made from electrolytic copper rated for 100% conductivity. Carded 2-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forney Industries Welding Helmet Safety Lens, Replacement, Suitable For Use With: 55652 Welding Helmets, Plastic, Clear
|
Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2.
|
Creamy, smooth paste formulated to meet ASTM B-813 specifications. Water washable, so it can be flushed from the piping system to limit corrosion. Lead-free and may be used with all types of soft solder including 95/5, 60/40, 50/50 and 40/60 solders. Will not run or drip off acid brushes, pipes and fittings during application. Superior wetting ability allows solder to flow easily and uniformly into joints. Pre-cleans and resists splattering. Conforms to ASTM B-813 specifications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumbers, workers in brass, copper, tin, steel and stained glass will achieve superior results. Produce strong, neat and durable joints. Ruby Fluid allows solder to flow in a thin film. Adheres quickly and stays where it is applied.
|
Cleans and fluxes. Formulated with strong cleaning agent, no need to clean oxidized copper. Ensures fast and effective soldering. Can be used for HVAC applications.
|
Strong and durable with solidly imbedded carbon steel (CS) bristles. Curved wood handle with pre-drilled hang hole. Ideal for aggressive cleaning and removing rust and paint from most surfaces. Angled head design eliminates cut and bruised knuckles. Feature .014" (.36mm) CS wire.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
|
E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
|
Strong and durable, solidly imbedded brass bristles, with pre-drilled hang hole. Will not rust. Ideal for general purpose cleaning and excellent for cleaning stainless steel. Features .012" (.33mm) brass wire in 4 x 16 rows.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flux for Copper Pipe. As thick as No. 5 flux. Cleans, removes oxidation, makes solder flow smoothly. Works with all solid wire solders. White paste with low odor. For potable plumbing, copper fire sprinkler and hydronic heating systems. Meets ASTM B-813 standard. Made in USA.
|
Marks on dry, wet and oily surfaces. Visible when hot. Resists flame and heat. Use on stainless steel, plastic, aluminum, lumber, tile, glass and more. Shatter resistant and stays sharp.
|
Replacement Lens, 5-1/4" x 4-1/2". Meets ANSI Z87.1 Safety Standards. Fits Forney 55647 ("Patriot"), 55669 ("Finish Line"), 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets. UV/IR protection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Constructed with an inner sleeve collet to separate the soapstone for maximum grip and protection. Slim line holder with a convenient deluxe pocket clip. Easily adjustable.
|
With solder powder added to pre-tin pipes. For potable plumbing, copper fire sprinkler and hydronic heating systems. Safe, lead free, water flushable. Resists burning, will not separate in extreme heat. Stays soft in cold weather. Excellent draw capabilities, as thick as No.5 flux. Meets ASTM B-813, IAPMO Listed.
|
Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Strong and durable with solidly imbedded carbon steel (CS) bristles. Long curved wood handle with pre-drilled hang hole. Ideal for aggressive cleaning and removing rust and paint from most surfaces. Angled head design eliminates cut and bruised knuckles. Features .014" (.36mm) diameter. Includes metal scraper.
|
General purpose, high quality rod for repair of low carbon steels. 6 rods. Copper coated rod has .06% max carbon and .17% max manganese. For projects around the house or commercial use. Red color coded. Tensile Strength: 45,000 PSI Melting Point: 2,700 degrees F (1,482 degrees C). 6 Rods.
|
For permanent marking on most surfaces. Intense, highly visible, quick drying, water and weather resistant. Precision valve regulates the paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes a 3/4" (19.05mm) barrel, 17cc's of paint, and a large nib that allows for either a 5/16" (7.94mm), 3/16" (4.76mm) or 1/8" (3.18mm) stroke width.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For permanent marking on most surfaces. Intense, highly visible, quick drying, water and weather resistant. Precision valve regulates the paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes a 3/4" (19.05mm) barrel, 17cc's of paint, and a large nib that allows for either a 5/16" (7.94mm), 3/16" (4.76mm) or 1/8" (3.18mm) stroke width.
|
For permanent marking on most surfaces. Intense, highly visible, quick drying, water and weather resistant. Precision valve regulates the paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes a 3/4" (19.05mm) barrel, 17cc's of paint, and a large nib that allows for either a 5/16" (7.94mm), 3/16" (4.76mm) or 1/8" (3.18mm) stroke width.
|
For permanent marking on most surfaces. Intense, highly visible, quick drying, water and weather resistant. Precision valve regulates the paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes a 3/4" (19.05mm) barrel, 17cc's of paint, and a large nib that allows for either a 5/16" (7.94mm), 3/16" (4.76mm) or 1/8" (3.18mm) stroke width.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Intense, highly visible, quick drying color that is water and weather resistant. Precision valve regulates the paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes a 3/4" (19.05mm) barrel, 17cc's of paint, and a large nib that allows for either a 5/16" (7.94mm), 3/16" (4.76mm) or 1/8" (3.18mm) stroke width.
|
For permanent marking on most surfaces. Intense, highly visible, quick drying, water and weather resistant. Precision valve regulates the paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes a 3/4" (19.05mm) barrel, 17cc's of paint, and a large nib that allows for either a 5/16" (7.94mm), 3/16" (4.76mm) or 1/8" (3.18mm) stroke width.
|
For permanent marking on most surfaces. Intense, highly visible, quick drying, water and weather resistant. Precision valve regulates the paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes a 3/4" (19.05mm) barrel, 17cc's of paint, and a large nib that allows for either a 5/16" (7.94mm), 3/16" (4.76mm) or 1/8" (3.18mm) stroke width.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For permanent marking on most surfaces. Intense, highly visible, quick drying, water and weather resistant. Precision valve regulates the paint flow. For use on metal, plastic, rubber, wood, ceramics, glass, textiles, cement and more. Includes a 3/4" (19.05mm) barrel, 17cc's of paint, and a large nib that allows for either a 5/16" (7.94mm), 3/16" (4.76mm) or 1/8" (3.18mm) stroke width.
|
E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
|
E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz).
|
E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
|
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160.
|
Specifically designed to fit smaller, narrower faces. These include a deep temple design that provides good side impact protection. The clear lens is best used indoors or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
|
Made of copper, for Weller soldering guns. Specs: Tip Width O/D .22 in.; Reach/Length 2.57 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Lens, 5-1/4" x 4-1/2". Meets ANSI Z87.1 Safety Standards. Fits Forney 55647 ("Patriot"), 55669 ("Finish Line"), 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets. UV/IR protection.
|
Durable, with a polypropylene handle and bristles. Resistant to most auto parts cleaning solutions. One-piece unitized brush vulcanized in rubber. Metal ferrule for more support and durability plus a slightly heavier fill. Use to clean motors, machinery and metal parts. Good for removing gasket material or baked-on varnish.
|
Strong and durable with solidly imbedded carbon steel (CS) bristles. Long curved wood handle with pre-drilled hang hole. Ideal for aggressive cleaning and removing rust and paint from most surfaces. Angled head design eliminates cut and bruised knuckles. Features .014" (.36mm) diameter. Includes metal scraper.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High carbon steel, tempered chisel on one end and point on the other. Black. Durable. All-purpose. Shock proof handle with loop for belt hook.
|
High carbon steel. Tempered chisel on one end and point on the other. Durable. All-purpose. Shock proof handle with loop for belt hook.
|
Excellent cleaning flux for use with all flame torches. Comes in easy to use, re-sealable tube.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forney Industries Welding Helmet Cover Lens, Replacement, Suitable For Use With: 55652 and 55653 Welding Helmets, Plastic, Clear
|
Strong and durable with solidly imbedded stainless steel (SS) bristles. Long curved wood handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Angled head design eliminates cut and bruised knuckles. Features .006" (.15mm) diameter.
|
Strong and durable, solidly imbedded brass bristles, with pre-drilled hang hole. Will not rust. Ideal for general purpose cleaning and excellent for cleaning stainless steel. Features .012" (.33mm) brass wire in 3 x 19 rows.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lead free, high quality flux containing powdered solder which provides added insurance for a leak free joint. For use with 95/5, 60/40, 50/50, and 40/60 solders.
|
Strong and durable with solidly imbedded stainless steel (SS) bristles. Long curved wood handle with pre-drilled hang hole. Excellent for general purpose cleaning of cook-out grills, in dairy operations, restaurants and surfaces exposed to high humidity. Angled head design eliminates cut and bruised knuckles. Features .006" (.15mm) diameter.
|
For cleaning tight hard-to-reach areas such as tee welds, concrete, driveway joints, auto body seams, removing paint in corners, etc. With pre-drilled hang hole and .014" (.36mm) carbon steel wire in 3 x 19 rows.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MIG contact tips are compatible with "Forney" (00306 and 00308), "Tweco", "Binzel" or "Clarke" MIG guns. It is precision machined. 4-pack.
|
MIG contact tips are compatible with "Forney" (00306 and 00308), "Tweco", "Binzel" or "Clarke" MIG guns. It is precision machined. 4-pack.
|
MIG contact tips are compatible with "Forney" (00306 and 00308), "Tweco", "Binzel" or "Clarke" MIG guns. It is precision machined. 4-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MIG contact tips are compatible with "Forney" (00306 and 00308), "Tweco", "Binzel" or "Clarke" MIG guns. It is precision machined. 4-pack.
|
General purpose, high quality rod for repair of low carbon steels. 6 rods. Copper coated rod has .06% max carbon and .17% max manganese. For projects around the house or commercial use. Red color coded. Tensile Strength: 45,000 PSI Melting Point: 2,700 degrees F (1,482 degrees C). 6 Rods.
|
Useful marking tool featuring a handy pocket clip, knurled aluminum handle and tungsten carbide tip. Cuts glass.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of copper, for Weller soldering guns. Specs: Tip O/D .165 inches; Reach/Length .885 inches.
|
Made of copper, for Weller soldering guns. Specs: Tip Width O/D .165 in.; Reach/Length .885 in.
|
Replacement MIG contact tip for "Hobart Handler" 135, 140 ("Forney" 00355), 175 and 187 ("Forney" 00356) and "Ironman 210" ("Forney" 00362) and 250 ("Forney 00361). 3-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement MIG contact tip for "Hobart Handler" 135, 140 ("Forney" 00355), 175 and 187 ("Forney" 00356) and "Ironman 210" ("Forney" 00362) and 250 ("Forney 00361). 3-pack.
|
Replacement MIG contact tip for "Hobart Handler" 135, 140 ("Forney" 00355), 175 and 187 ("Forney" 00356) and "Ironman 210" ("Forney" 00362) and 250 ("Forney 00361). 3-pack.
|
For Hobart, Handler 135, 140 (Forney 00355), 175 and 187 (Forney 00356), and Ironman 210 (Forney 00362) and 250 (Forney 00361). 3-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tip cleaner kit provides as many as 60 or more cleaning edges per inch of cleaner. Fits all tip sizes. Light and easy to use. Contains 11 sizes - 6 through 26. Aluminum case includes dressing tool.
|
Plumbers, workers in brass, copper, tin, steel and stained glass will achieve superior results. Produce strong, neat and durable joints. Ruby Fluid allows solder to flow in a thin film. Adheres quickly and stays where it is applied.
|
Tip cleaner kit provides as many as 60 or more cleaning edges per inch of cleaner. Fits all tip sizes. Light and easy to use. Contains 11 sizes - 6 through 26. Aluminum case includes dressing tool.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement clear grinding shield for "Forney" 58600 (sku # 891.0275) and 58605 grinding shield assemblies. Meets ANSI Z87.1 safety standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING.
|
Sleek and compact; weighs less than one ounce; offers serious all-day comfort with a stylish look and extreme durability; independently certified; provides 99.9% UV protection; meets ANSI Z87.1+ safety standards.
|
For cleaning tight hard-to-reach areas in cook-out grills, dairy operations, restaurants, boats and areas where humidity is a problem. Ideal for cleaning most aluminum. Features pre-drilled hang hole and .014" (.36mm) stainless steel wire in 3 x 19 rows.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes 2 barbed hose nipples, 2 hose ferrules, 1-each oxygen and acetylene 9/16"-18 hose nuts and "B" fittings.
|
Includes 2 barbed hose nipples, 2 hose ferrules, 1-each oxygen and acetylene 9/16"-18 hose nuts and "B" fittings.
|
Replacement shade 5-1/4" (133.35mm) x 4-1/2" (114.3mm) glass welding filter lens. For prolonged periods of welding and/or to see true flame arc and puddle color. The gold coating reflects 90% of radiated heat for cooler operation and less eye fatigue. Provides UV/IR protection. Meets ANSI Z87.1 Safety Standards. Fits Forney 55647 ("Patriot"), 55669 ("Finish Line"), 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets using a 5-1/4" (133.35mm) x 4-1/2" (114.3mm) window opening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement shade 5-1/4" (133.35mm) x 4-1/2" (114.3mm) glass welding filter lens. For prolonged periods of welding and/or to see true flame arc and puddle color. The gold coating reflects 90% of radiated heat for cooler operation and less eye fatigue. Provides UV/IR protection. Meets ANSI Z87.1 Safety Standards. Fits Forney 55647 ("Patriot"), 55669 ("Finish Line"), 55672 ("Bandit III"), 55673 ("Bandit II"), 55684 ("Titan") and 55686 ("Super Slim") welding helmets and most brand name helmets using a 5-1/4" (133.35mm) x 4-1/2" (114.3mm) window opening.
|
Split leather palm and back. 4" safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. "Forney" imprint on glove.
|
Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15-1/2" (393.7mm) x 8" (203.2mm) replacement green grinding shield for Forney 58604 and 58606 grinding shield assemblies. Meets ANSI Z87.1 Safety Standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING.
|
Includes 2 barbed hose splicers and 4 hose ferrules.
|
Includes 2 barbed hose splicers and 4 hose ferrules.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of high impact polypropylene plastic. Includes four (4) internal compartments to separate rod. Screw-type cap and rubber o-ring provide clean, dry, air-tight storage for electrodes. Store up to 10 Lbs.
|
Prevents weld spatter from adhering to MIG nozzles, contact tips, weld area and work surface.
|
Eliminates erratic operation with a film that will not clog orifices and threads on MIG nozzles and contact tips. Suitable for use on fixtures of semi- and automatic welders. Odorless, non-flammable, non-toxic and silicone free, it will not cause porosity.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tempered steel chisel to resist dulling during heavy duty usage. Impact resistant handle. Removable and replaceable brush (Forney 70501) for cleaning. 12" (304.8mm) overall length.
|
A general purpose repair kit containing (1) each easy-pick hook (o-ring remover), easy-pick 90 degree scribe, easy-pick double scribe and easy-pick straight scribe.
|
8" (203.2mm) long with 1-3/4" (44.4mm) wide jaw opening. Accepts up to #2 welding cable. Rugged, economical ground clamp for shop maintenance and field work. Good positive connection. Suitable for all farm and shop welders.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2.
|
Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks.
|
Replacement ratcheting-type headgear for "Fornery" 55666 (sku # 891.0069), 55673 (sku # 891.0077), 55697 ("Insta-Shade II") and old-style 55699 ("Insta-Shade III" - two control knobs on outside of helmet) welding helmets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
|
Features two separate 50mm round #5 shaded hardened eye-pieces. Equipped with cover lenses. Folds up to pocket size for storage and carrying. Meets ANSI Z87.1 safety standards. "Forney" 56900 (shaded) and 56901 (clear) replacement 50mm eye-pieces are available separately. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY.
|
Include patented temple technology designed to relieve pressure on the ear while providing excellent stability and comfort. Additional features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. These clear lenses are best used for indoor/outdoor use or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Strong non-switchable magnetic that sticks to any iron object. Includes 45, 90 and 135 degree angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks.
|
For fine wiring, hobbies, models, making jewelry, electronics, TVs, radios, stereos, games, toys, etc. 750 degrees F (398.9 degrees C) tip temperature.
|
Include patented temple technology designed to relieve pressure on the ear while providing excellent stability and comfort. Additional features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. These clear lenses are best used for indoor/outdoor use or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
|
Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
|
Split leather palm and back. Extended gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove. "Forney" imprint on glove.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Split Leather palm and back. Extended Gauntlet safety cuff offers extra wrist and forearm protection. Fortified with heat resistant Kevlar thread for added durability and wear. Cotton fleece lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove. Forney?s emblem imprint on glove.
|
Extended gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength. Forney imprint on glove.
|
Balanced zinc and copper alloy. Features excellent ductility and is smooth flowing. Excellent for brazing sheet metal, pipes, fenders, water tanks and many cast iron applications. Requires flux. Yellow color coded. Tensile Strength: 63,000 PSI Melting Point: 1,620 degrees F (882degrees C). 6 rods.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featuring 2" (50.8mm) x 4-1/4" (107.95mm) #5 shade hardened lens with clear glass cover lens. Meets ANSI Z87.1 safety standards. Conforms comfortably to the head and allows ample room to fit over regular eye glasses. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY.
|
General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110.
|
Split leather palm and back. Extended gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove. "Forney" imprint on glove.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extended Gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove. Forney?s emblem imprint on glove.
|
Ideal product for soldering PC boards electrical and light duty soldering jobs.
|
Commercial-grade battery charger clamps with parrot-style zinc-plated jaws. Includes positive and negative clamps. Accepts up to #2 gauge cable. heavy duty construction and easy grip handles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ER 70S-6 mild steel. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Yellow color coding on label. Required shielding gas: Argon/CO2. Recommended Polarity: DCEP Reverse Polarity. Tensile Strength (PSI): 70,000. Wt. 2 lb.
|
8-3/8" (212.8mm) long with 2" (50.8mm) maximum jaw opening and 2-1/2" - 3" (63.5mm - 76.2mm) depth. Designed to grip a few inches from the end of the metal. Allows weld to start or finish at the end of the joint. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING.
|
Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty, bakelite crowfoot-design electrical receptacle with 2-pole/3-wire grounding for surface mounting. NEMA 10-50.
|
Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
|
Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards.
|
Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards.
|
Magnifying Lens, 2" (50.8mm) x 4-1/4" (107.95mm) welding lens. Allows user to weld with or without eye glasses. Meets ANSI Z87.1 Safety Standards. Fits Forney 55680 ("Super Slim") welding helmets and most brand name helmets using 2" (50.8mm) x 4-1/4" (107.95mm) window opening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Magnifying Lens, 2" (50.8mm) x 4-1/4" (107.95mm) welding lens. Allows user to weld with or without eye glasses. Meets ANSI Z87.1 Safety Standards. Fits Forney 55680 ("Super Slim") welding helmets and most brand name helmets using 2" (50.8mm) x 4-1/4" (107.95mm) window opening.
|
2" (50.8mm) face with 1/4" (6.35mm) national pipe thread (NPT). Features threads that are common to "Forney", "Victor", "Harris", "Smith" and "Marquette" compatible regulators. Solid brass threads and brass casings provide extra long life.
|
2" (50.8mm) face with 1/4" (6.35mm) national pipe thread (NPT). Features threads that are common to "Forney", "Victor", "Harris", "Smith" and "Marquette" compatible regulators. Solid brass threads and brass casings provide extra long life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2" (50.8mm) face with 1/4" (6.35mm) national pipe thread (NPT). Features threads that are common to "Forney", "Victor", "Harris", "Smith" and "Marquette" compatible regulators. Solid brass threads and brass casings provide extra long life.
|
2" (50.8mm) face with 1/4" (6.35mm) national pipe thread (NPT). Features threads that are common to "Forney", "Victor", "Harris", "Smith" and "Marquette" compatible regulators. Solid brass threads and brass casings provide extra long life.
|
10-1/2" (266.7mm) long with 3-3/4" (95.3mm) maximum opening and 3" (76.2mm) depth. Extra clamping capacity for large objects. NOT TO BE USED FOR SCAFFOLDING OR OVERHEAD LIFTING.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ER 70S-6 mild steel. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Yellow color coding on label. Required shielding gas: Argon/CO2. Recommended Polarity: DCEP Reverse Polarity. Tensile Strength (PSI): 70,000. Wt. 2 lb.
|
Clear lens and anti-fog coating. Includes temple and head straps which allow an individual to swap between safety glasses and goggles. Soft foam lining around the frame which block out debris. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards.
|
Formulated for high tensile strength and ductility. Smooth flowing. Excellent for most brazing uses. Flux coated for best cleaning action. Yellow color coded. Tensile Strength: 65,000 PSI. Melting Point: 1,598? F (870? C).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Twelve (12) high carbon steel tip drills stored in a barrel. Sizes #52 through 74 within a pencil compatible design. Includes pocket clip. Used to clean and true most standard orifices of acetylene welding and cutting tips. Use "Forney" 86139 for replacement cleaning drills.
|
Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.
|
Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.
|
Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.
|
Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ER 70S-6 mild steel. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Yellow color coding on label. Required shielding gas: Argon/CO2. Recommended Polarity: DCEP Reverse Polarity. Tensile Strength (PSI): 70,000. Wt. 2 lb.
|
Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Diameter (Inches): 5/32" Weight Lbs. (Kg): 5 (2.26) Tensile Strength (PSI): 84,000 Amperage: 140-190
|
For hobbies, kits and radios. Stainless steel barrel, heat and impact resistant pencil handle. Includes No.MT1, 1/8" diameter replaceable nickel-plated copper tip that develops 750 degrees Fahrenheit. 8-1/4"L, 120 Volts, 25 watts, 50/60 Hz. U.L. Listed.
|
|
|
|
|
|
