Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > TORCHES / SOLDERING > FLUX
Sort By:
1
Oatey 30011 No. 5 Paste Flux Oatey No. 95 Tinning Flux Nokorode 14000 Regular Paste Flux
Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder. With Oatey silver solder powder added to pre-tin copper pipes. Cleans, fluxes and tins. Lead free, can be used on potable water systems. For clean sweat copper fittings, no pre-cleaning needed. Do not use on electrical parts. Formulated with the same quality as Oatey No.5 flux. Will work for large diameter copper and does not turn copper green. Can never burn out. Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2.
Rectroseal C-Flux Soft Soldering Flux Nokorode Aqua Flux 74044 Paste Flux Oatey 53017 Lead Free Soldering Paste Flux
Lead free, high quality flux containing powdered solder which provides added insurance for a leak free joint. For use with 95/5, 60/40, 50/50, and 40/60 solders. Creamy, smooth paste formulated to meet ASTM B-813 specifications. Water washable, so it can be flushed from the piping system to limit corrosion. Lead-free and may be used with all types of soft solder including 95/5, 60/40, 50/50 and 40/60 solders. Will not run or drip off acid brushes, pipes and fittings during application. Superior wetting ability allows solder to flow easily and uniformly into joints. Pre-cleans and resists splattering. Conforms to ASTM B-813 specifications. Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder.
Oatey No. 95 Tinning Flux Oatey 30130 Water Soluble Flux Oatey 30013 No. 5 Paste Flux
With Oatey silver solder powder added to pre-tin copper pipes. Cleans, fluxes and tins. Lead free, can be used on potable water systems. For clean sweat copper fittings, no pre-cleaning needed. Do not use on electrical parts. Formulated with the same quality as Oatey No.5 flux. Will work for large diameter copper and does not turn copper green. Can never burn out. Cleans, removes oxidation, makes solder flow smoothly. Works with all solid wire solders. White paste with low odor. For potable plumbing, copper fire sprinkler and hydronic heating systems. Meets ASTM B-813 standard. IAPMO listed. Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder.
Nokorode 14010 Regular Paste Flux Nokorode Aqua Flux 74047 Paste Flux PASTE FLUX FOR SOLDER 2 OZ
Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Creamy, smooth paste formulated to meet ASTM B-813 specifications. Water washable, so it can be flushed from the piping system to limit corrosion. Lead-free and may be used with all types of soft solder including 95/5, 60/40, 50/50 and 40/60 solders. Will not run or drip off acid brushes, pipes and fittings during application. Superior wetting ability allows solder to flow easily and uniformly into joints. Pre-cleans and resists splattering. Conforms to ASTM B-813 specifications. Plumbers, workers in brass, copper, tin, steel and stained glass will achieve superior results. Produce strong, neat and durable joints. Ruby Fluid allows solder to flow in a thin film. Adheres quickly and stays where it is applied.
Oatey 30106 Soldering Liquid Flux Oatey H-205 Water Soluble Flux Oatey H-2095 Water Soluble Tinning Flux
Cleans and fluxes. Formulated with strong cleaning agent, no need to clean oxidized copper. Ensures fast and effective soldering. Can be used for HVAC applications. Flux for Copper Pipe. As thick as No. 5 flux. Cleans, removes oxidation, makes solder flow smoothly. Works with all solid wire solders. White paste with low odor. For potable plumbing, copper fire sprinkler and hydronic heating systems. Meets ASTM B-813 standard. Made in USA. With solder powder added to pre-tin pipes. For potable plumbing, copper fire sprinkler and hydronic heating systems. Safe, lead free, water flushable. Resists burning, will not separate in extreme heat. Stays soft in cold weather. Excellent draw capabilities, as thick as No.5 flux. Meets ASTM B-813, IAPMO Listed.
Weller 7250W Standard Soldering Tip Rectroseal C-Flux Soft Soldering Flux Weller 7135N Standard Soldering Tip
Made of copper, for Weller soldering guns. Specs: Tip Width O/D .22 in.; Reach/Length 2.57 in. Lead free, high quality flux containing powdered solder which provides added insurance for a leak free joint. For use with 95/5, 60/40, 50/50, and 40/60 solders. Made of copper, for Weller soldering guns. Specs: Tip O/D  .165 inches; Reach/Length .885 inches.
Weller 7135W Standard Soldering Tip LIQUID FLUX FOR SOLDER 2 OZ   FILTER VACUUM CLOTH 3PK
FILTER VACUUM CLOTH 3PK
Our Price: $8.23
Made of copper, for Weller soldering guns. Specs: Tip Width O/D .165 in.; Reach/Length .885 in. Plumbers, workers in brass, copper, tin, steel and stained glass will achieve superior results. Produce strong, neat and durable joints. Ruby Fluid allows solder to flow in a thin film. Adheres quickly and stays where it is applied. Designed for use with the Makita Cordless Vacuum models BCL180W, XLC02, and LC01 to filter debris. Reusable, easy to clean design. Made of durable cloth for added durability and long life. Includes: (3) cloth vacuum filters.
Nokorode 14020 Regular Paste Flux Nokorode 14030 All Purpose Regular Paste Flux TORCH PROPANE BRASS PENCIL TIP
Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Delivers a fine, concentrated flame for pinpoint heating; adjustable flame knob allows for flame control and fuel economy. General uses: soldering pipe; soft solder; thawing pipes; removing paint, tile and putty; lighting pilots and grills. Use with propane fuel only.
TORCH BRASS HD PENCIL FLAME   TORCH SELF LIGHTING           TORCH SELF LIGHTING
An all brass heavy duty pencil flame torch that can be used with MAP/Pro propane fuel or "MAPP"; allows you to perform larger jobs and finish smaller jobs quicker. The torch can handle soldering up to 1" copper tubing. Allows for versatility and ease of operation; the brass regulator valve allows for consistent flame at any angle of operation; the adjustable flame knob allows for flame control and fuel economy; this torch can be used to perform larger jobs or accomplish smaller jobs quicker; the MT 551 can solder up to 1" of copper tubing; use with MAP/Pro propane fuel. Regulated self-lighting propane torch features a stainless steel burn tube for strength and an ergonomic handle providing comfort and durability. The regulated valve delivers the highest quality and consistent triple point flame while operating the torch at any angle. The fuel control knob provides control and economy. Auto igniter for instant flame. Use with propane fuel only.
TORCH SELF LIGHTING HOSE 4FT  TORCH SWIVEL SELF LIGHTING    TORCH ON-DEMAND TRIGGER PRO
A self-lighted regulated torch that delivers a swirl flame with a 4' flexible extension hose and a belt clip to hold the fuel cylinder; can be used for MAP/Pro or propane fuels. Self-lighting MAP/Pro or propane torch has a 360 degree swivel that allows for versatility and ease of operation; the brass regulator valve allows for consistent flame at any angle of operation; the adjustable flame knob allows for flame control and fuel economy; this torch can be used to perform larger jobs or accomplish smaller jobs quicker; the MT 555 can solder up to 2" of copper tubing. A high performance Silver Swirl MAP/Pro torch that delivers a swirl flame; has an On-Demand trigger giving you instant ignition and flame shut off; has a safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting; can solder up to 2" of copper tubing; use with MAP/Pro or propane fuel.
TORCH SWIVEL ON-DEMAND TRIGGER Bernzomatic 333251 Oxygen Cylinder Bernzomatic 304182 Propane Cylinder
A high performance torch that delivers a swirl flame; has an On-Demand trigger giving one instant ignition and flame shut off; has safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting; can solder up to 2" of copper tubing. Oxygen cylinders have a CGA 601 valve with left-hand threads. Cylinders are designed to meet Title 49 CFR DOT specification 39 primarily for containing liquefied gas. Propane cylinders have a CGA 600 valve with 1.000 - 20 UNEF-RH - EXT thread. Cylinders are designed to meet Title 49 CFR DOT Specification 39 primarily for containing liquefied gas.
TORCH ON-DEMAND TRIGGER PRO   BUTANE CYLINDER 5.6OZ         VACUUM HAND 12V 29MINS 18.5IN
A high performance Silver Swirl MAP/Pro torch that delivers a swirl flame; has an On-Demand trigger giving you instant ignition and flame shut off; has a safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting; can solder up to 2" of copper tubing; use with MAP/Pro or propane fuel. Universal fuel tip and additional tips in cap. Includes: vacuum, crevice tool, extension wand, filter assembly, utility nozzle. Deliver 33DFM for use on wide range of materials. Up to 29 minutes on a single charge using Red lithium XC4.0 batteries, reusable 42 pleat filter, lock-on switch reduces user fatigue. 18.5" L., 2.25 lbs.
TORCH KIT W/SWIVEL TRIGGER    BLOWER COMPACT 3SPD 18V 100CFM VACUUM CORDLESS WET/DRY 18VOLT
A high performance torch that delivers a swirl flame; has an On-Demand trigger giving one instant ignition and flame shut off; has safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting; can solder up to 2" of copper tubing. Includes 14.1 oz. disposable MAP/Pro cylinder. 3-Speed electronic switch and variable speed trigger allow for versatile clearing power, lock-on switch reduces user fatigue, extension nozzle clears dust and debris easily from the ground or overhead without having to lean over or stretch, universal inflator/deflator for easy set-up and take-down of most inflatable products, shock-absorbing polymer and reinforced handle resists drops, nozzle made from soft plastic to resist crushing or cracking. 2.6 lb., 6-1/2" H, 100 CFM max air flow. BATTERY NOT INCLUDED. Works with all Milwaukee M18 Batteries (batteries sold separately). Includes: Vacuum, crevice tool, filter assembly, and wide utility nozzle. Working on all Milwaukee 18V slide-on batteries, RED LITHIUM or NiCd, the 0880-20 wet/dry vacuum offers long continuous run time and high air power and suction to provide quick and easy removal of dust, debris and water. A washable, reusable wet/dry HEPA filter delivers excellent fine dust collection and does not need to be changed. 9.4 lb., 11-1/2" H, Max Air Flow 45 CuFt Min.
Map-Pro 332477 Gas Cylinder VACUUM KIT 18V COMPCT LITH-ION VACUUM COMPACT KIT 20AH 18V
MAP-PRO cylinders have a CGA 600 valve with 1.000 - 20 UNEF - RH - EXT thread. Cylinders are designed to meet Title 49 CFR DOT Specification 39 primarily for containing liquefied gas. Up to 15 minutes of continuous use from a single fully charged 18 volt compact Lithium-Ion battery. Re-designed floor nozzle for improved maneuverability and debris collection. Strong suction power for fast and efficient cleaning. Bag-less 2-stage cloth filtration system allows for easier cleaning and quicker debris disposal. Compact and ergonomic design at only 18-3/4" long. Ergonomic soft grip handle provides increased comfort and control. 18 volt compact battery is compatible with 18 volt LXT tools. Provides more run time per charge, reaches full charge in 25 minutes or less and features an integrated L.E.D. battery charge level indicator. Equipped with Star Protection computer controls to protect against overloading, over-discharging and over heating. Rapid Optimum charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. Weighs only 2.7 lbs with battery for reduced operator fatigue. Kit includes: (1) 18 v Compact Lithium-Ion 2.0Ah battery, (1) 18 v Lithium-Ion rapid optimum charger, (1) extension attachment, (1) floor nozzle, (1) filter and (1) cloth vacuum filter. Up to 13 minutes of continuous use from a single fully charged 18 volt compact Lithium-Ion battery. Re-designed floor nozzle for improved maneuverability and debris collection. Strong suction power for fast and efficient cleaning. Bag-less 2-stage cloth filtration system allows for easier cleaning and quicker debris disposal. Compact and ergonomic design at only 18-3/4" long. Ergonomic soft grip handle provides increased comfort and control. 18 volt compact battery is compatible with 18 volt LXT tools. Provides more run time per charge, reaches full charge in 25 minutes or less and features an integrated L.E.D. battery charge level indicator. Equipped with Star Protection computer controls to protect against overloading, over-discharging and overheating. Rapid Optimum charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. Weighs only 2.7 lbs with battery for reduced operator fatigue. Kit includes: (1) 18 v Vacuum, (1) 18 v Compact Lithium-Ion 2.0Ah battery, (1) 18 v Lithium-Ion rapid optimum charger, (1) extension attachment, (1) floor nozzle, (1) 6" crevice nozzle holder, (1) crevice nozzle, (1) filter, and (1) cloth vacuum filter.
Dewalt DW682K Plate Joiner M-Spector M12 2313-21 Cordless Inspection Camera Kit Porter-Cable 557 Plate Joiner Kit
Dual rack and pinion fence ensure blade and fence are always parallel, integral one-piece fence is adjustable and tilts 0-90 degrees, flush cuts can be made at 0 degrees without removing fence, 45 degree locating notch in fence allows indexing off the outside surface of a mitered joint, non-marring, heavy-duty aluminum shoe, retractable, anti-slip pins, preset depth stops for all common biscuit sizes. Specs: 7/8" arbor, no load speed 10,000RPM, depth of cut (mm) 20mm, biscuits accepted 0, 10, 20, weighs 6.6lbs. Includes: carbide blade, dust bag, vacuum adapter, torx key, wrench, kit box. Features: screen rotates providing user fluid image control; Optimized 2.7" high resolution color LCD; 9mm 640x480 pixel digital image sensor; 4 LED lights, 5 settings; 3' cable length, 320 x 240 display resolution aluminum head and improved flexibility deliver unmatched durability and pipe maneuverability. Includes M12 Red Lithium battery, 30 minute charger, hook, magnet and mirror attachments and carrying case. Fence tilts from 0 to 135 degrees with positive adjustable stop at 90 degrees, precise micro height adjustment knob, Lock on trigger, height scale accurate at any angle, seven-position rotating depth stop for FF, #0, #10, #20, Simplex, Duplex, and Max (#6) biscuits. Spindle lock for easy blade changes. Bale handle attached to fence, not motor for greater stability and added control during cuts. 1" O.D. dust port accepts standard bag or can be connected to a vacuum. Standard equipment: plate joiner, 4" blade #5558, centering plate #888776, dust bag #883175, chip deflector #886490, Allan wrench #891869, carrying case and operating manual.
Dewalt DCT410S1 Cordless Inspection Cameras
Camera features a wireless 3.5-inch LCD screen that is removable to provide visibility in tight areas, a waterproof, 3' cable and the ability to instantly capture videos and photos, offers increased visibility with a 3x zoom capability. Includes:  (1) 12V Max battery, hook and magnet tools to aid in retrieval of objects.
   
 
1