Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > TORCHES / SOLDERING > SOLDER
Sort By:
1
Oatey 30710 Acid Brush BRSH FLUX 3/PK 3/8IN          Oatey 31410 Cleaning Brush
Use for applying liquid or paste fluxes. For liquid or paste soldering flux. 6" (152.4mm) long and 1/2" (12.7mm) wide. 3-pack. One stainless steel bristled brush for cleaning threads on hard metal pipes and one with brass bristles for use on softer metals. Cleans threaded pipe and fittings, and much more.
FLINT RENEWALS                Oatey 53026 Wire Solder Oatey 53185 Rosin Core Wire Solder
Flint renewals for spark lighter (5) individual flints. Lead free alloy of 95 percent Tin and 5 percent Antimony. Most commonly used where frequent and extreme temperature changes and vibrations occur. Meets the requirements of the Safe Water Drinking Act; 450 degrees F ? 464 degrees F melting range. Alloy of 60 percent Tin and 40 percent Lead; no external flux is needed. 361 degrees F ? 375 degrees F melting range. Can be used for electrical applications including wiring and other fine electronic work. Contains lead. Not for use on drinking water lines.
Oatey 53023 Rosin Leaded Core Solder LIGHTER FLINT SPARK           Oatey 53012 Rosin Leaded Core Solder
Alloy of 60 percent Tin and 40 percent Lead; no external flux is needed. 361 degrees F ? 375 degrees F melting range. Can be used for electrical applications including wiring and other fine electronic work. Contains lead. Not for use on drinking water lines. Spark lighter with replaceable flints; used to ignite non-self-lighting torches. 40 percent tin and 60 percent lead alloy with non-corrosive and non-conductive core flux for electrical and electronic soldering such as appliance repair, radio, TV, wiring motors and non-drinking water lines; melting range of 361 to 460 degrees F.
Safe-Flo 53061 Wire Solder Oatey 53010 Wire Solder Oatey 53174 Acid Core Wire Solder
Alloy of tin, silver, copper and bismuth; works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics with a melting range of 420 to 460 degrees F;  .084" diameter. Used for tin plate work, sheet metal seaming, and hot water heating lines. Meets requirements of Safe Drinking Water Act for use on copper potable water lines. 50 percent tin and 50 percent lead, used with an external flux. Good flow characteristics and low melting point. 361 to 421 degrees Fahrenheit melting range; 0.075" diameter. Used for soldering galvanized gutters, general repairs, radiators, sheet metal and non-drinking water lines. Contains lead, not to be used for plumbing applications. Lead free alloy of 95 percent Tin and 5 percent Antimony. Acid flux is contained within the core. Used for for sheet metal, radiator, gutter repair work with a melting range of 450 degrees F-464 degrees F; .081" gauge
Oatey 53011 Leaded Acid Core Solder SLDR 40/60-1/4LB 1/8IN        SPREADER FLAME
40 percent tin and 60 percent lead alloy with acid flux contained in wire core; no external flux necessary. For sheet metal work, auto radiator repair, steel gutters and more. Not for use in electrical applications. 361 to 460 degrees Fahrenheit melting range. 0.081" diameter. Contains lead, NOT for plumbing applications. 40 percent tin, 60 percent lead. For sweat fittings, sheet metal joints, gutter work and other big jobs. Works well on galvanized sheet, copper, steel, nickel plate, brass and tin plate. Tensile Strength: 4900 PSI. Melting Temp: 460? (238? C). NOT FOR ELECTRICAL CONNECTIONS. Flame spreader.
Oatey 53019 Instant Wire Solder SOLDER 1/8IN SW40TIN/60L 1/4LB Oatey 53016 Rosin Core Solder
Easy to use; solder and flux all in one. Can be used on drinking water lines. Includes acid brush. 40 percent tin, 60 percent lead. Use with appropriate type flux such as Forney 38120, Ruby Fluid, Forney 38125, Paste Flux, or Forney 38127 & 38128, Hi-Temp Fluxes. Tensile Strength: 4900 PSI. Melting Temp: 460? (238? C). NOT SUITABLE FOR ALUMINUM. 40 percent tin and 60 percent lead alloy with non-corrosive and non-conductive core flux for electrical and electronic soldering such as appliance repair, radio, TV, wiring motors and non-drinking water lines; melting range of 361 to 460 degrees F.
CLOTH EMERY 80GRIT 1INX10YARD CLOTH EMERY 120GRIT 1INX10YARD CLOTH EMERY 180GRIT 1INX10YARD
Hand sanding (dry) and cleaning of metal, wood and pipe ends. Aluminum oxide coating. Open grain prevents loading. 1" x 10 yd bench roll. Hand sanding (dry) and cleaning of metal, wood and pipe ends. Aluminum oxide coating. Open grain prevents loading. 1" x 10 yd bench roll. Hand sanding (dry) and cleaning of metal, wood and pipe ends. Aluminum oxide coating. Open grain prevents loading. 1" x 10 yd bench roll.
CLOTH EMERY 320GRIT 1INX10YARD Dewalt DW9063 Replacement Xenon Flashlight Bulb SOLDER 3/32IN 40TIN/60L 1/4 LB
Hand sanding (dry) and cleaning of metal, wood and pipe ends. Aluminum oxide coating. Open grain prevents loading. 1" x 10 yd bench roll. Xenon bulb supplies 281 lumens. 40 percent tin, 60 percent lead. Ideal for electrical wiring connections because of its non-conductive residue. Will not cause corrosion or deterioration of electrical connections. Tensile Strength: 4900 PSI. Melting Temp: 460? (238? C).
SLDR 50/50 1/8IN 1/4LB        SAND SCREEN 80 GRIT 1-1/2X9FT SAND SCREEN 120 GRIT 1-1/2X9FT
50 percent tin and 50 percent lead. Use with appropriate type flux such as Forney 38120, Ruby Fluid, Forney 38125, Paste Flux, or Forney 38127 & 38128, Hi-Temp Fluxes. Tensile Strength: 5500 PSI. Melting Temp: 421? (216? C). NOT SUITABLE FOR ALUMINUM. 1-1/2" x 9'. Silicon carbide grain. Non-loading open screen. For wood, paint, ceramic, ferrous and non-ferrous metals. 1-1/2" x 9'. Silicon carbide grain. Non-loading open screen. For wood, paint, ceramic, ferrous and non-ferrous metals.
SAND SCREEN 180 GRIT 1-1/2X9FT SAND SCREEN 320 GRIT 1-1/2X9FT Dewalt DW9083 Replacement Xenon Flashlight Bulb
1-1/2" x 9'. Silicon carbide grain. Non-loading open screen. For wood, paint, ceramic, ferrous and non-ferrous metals. 1-1/2" x 9'. Silicon carbide grain. Non-loading open screen. For wood, paint, ceramic, ferrous and non-ferrous metals. Xenon bulb supplies 281 lumens.
Oatey 53027 Wire Solder SOLDERING IRON 30 WATT 110V   Dewalt DW9043 Replacement Xenon Flashlight Bulb
Lead free alloy of 95 percent Tin and 5 percent Antimony. Most commonly used where frequent and extreme temperature changes and vibrations occur. Meets the requirements of the Safe Water Drinking Act; 450 degrees F ? 464 degrees F melting range. For fine wiring, hobbies, models, making jewelry, electronics, TVs, radios, stereos, games, toys, etc. 750 degrees F (398.9 degrees C) tip temperature. Xenon bulb supplies 281 lumens.
Copper Lock 10-801 No Heat Solder SOLDER 1/16IN 60TIN/40L 1/4LB SOLDERING IRON LT DUTY UL 40W
Fast, easy, permanent; apply inside the copper connector, fit in the copper pipe and within seconds a permanent leakproof seal will occur.  Pressure may be applied after two minutes; can withstand pressures up to 500 PSI; can withstand temperatures from -60 degrees F to +300  degrees F. Meets US Military specifications. Good with all refrigerants. 60 percent tin, 40 percent lead. Ideal for electrical wiring connections because of its non-conductive residue. Will not cause corrosion or deterioration of electrical connections. Tensile Strength: 6900 PSI. Melting Temp: 375? (190? C). Ideal product for soldering PC boards electrical and light duty soldering jobs.
TORCH PROPANE BRASS PENCIL TIP Oatey 53015 Acid Core Wire Solder Safe-Flo 53062 Wire Solder
Delivers a fine, concentrated flame for pinpoint heating; adjustable flame knob allows for flame control and fuel economy. General uses: soldering pipe; soft solder; thawing pipes; removing paint, tile and putty; lighting pilots and grills. Use with propane fuel only. 40 percent tin-60 percent lead, .125" gauge; can not be used on drinking lines. Alloy of tin, silver, copper and bismuth. Works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics with a melting range of 420 to 460 degrees F;  0.117" diameter. Used for tin plate work, sheet metal seaming, and hot water heating lines. Meets requirements of Safe Drinking Water Act for use on copper potable water lines.
Oatey 53176 Acid Core Wire Solder SOLDER WIRE KITS WATER SOLUBLE Oatey 50193 Acid Core Wire Solder
Lead free alloy of 95 percent Tin and 5 percent Antimony. Acid flux is contained within the core. Used for for sheet metal, radiator, gutter repair work with a melting range of 450 degrees F-464 degrees F; .081" gauge General uses: solder pipes, brazing metal, plumbing and automotive repairs. Product details: wire melting temperature: 450 degree F; diameter: 0.062"; wire net weight: .75 oz. silver solder; .5 oz. water soluble paste flux - NSF certified to ANSI/NSF61. Kit contents: 3 oz. solid wire solder, 1 oz. water soluble paste flux, 2-1/4" acid brush, abrasive cloth. Alloy of 40 percent Tin and 60 percent Lead. For repairing galvanized gutters, filling metal seams and other general repairs with a melting range of 360 degrees F - 460 degrees F. Can not be used on drinking water lines; .081" gauge.
SOLDER 1/8IN 95TIN/5ANT 1/4 LB Dewalt DC5273 Replacement Fluorescent Lamp SOLDER COMM 1/8IN 1LB RSN CRE
Tin-antimony "lead-free" solder can be used for soldering potable water pipe joints. Good for plumbing, refrigeration systems and other non-electrical applications where strength is required. Fluorescent bulb provides bright area light. 4 prong bulb base provides support to bulb for durability. Replacement bulb for 18-volt fluorescent area light, 4-volt cordless area light and DC527 (529.1596) 18-volt cordless area light. Ideal for electrical wiring connections because of its non-conductive residue. Will not cause corrosion or deterioration of electrical connections. Melting Temp: 575? (299? C).
SOLDER 1/8IN AC30TIN/70L 1/2LB Oatey 53014 Leaded Wire Solder SOLDER COMM ACID CRE 1LB 1/8IN
30 percent tin, 70 percent lead. For sweat fittings, sheet metal joints, gutter work and other big jobs. Works well on galvanized sheet, copper, steel, nickel plate, brass and tin plate. Tensile Strength: 4500 PSI. Melting Temp: 491? (255? C). NOT FOR ELECTRICAL CONNECTIONS. 50 percent tin and 50 percent lead; use of flux required; .125" gauge. General purpose solder for sheet metal work, auto radiator repair and steel gutters. Contains lead, NOT for plumbing applications. For sweat fittings, sheet metal joints, gutter work and other big jobs. Works well on galvanized sheet, copper, steel, nickel plate, brass and tin plate. Melting Temp: 575? (299? C). NOT FOR ELECTRICAL CONNECTIONS.
Weller Featherweight Corded Soldering Iron Oatey 50192 Solid Wire Solder Safe-Flo 50683 Wire Solder Kit
For hobbies, kits and radios. Stainless steel barrel, heat and impact resistant pencil handle. Includes No.MT1, 1/8" diameter replaceable nickel-plated copper tip that develops 750 degrees Fahrenheit. 8-1/4"L, 120 Volts, 25 watts, 50/60 Hz. U.L. Listed. Alloy of 50 percent tin and 50 percent lead, use with Oatey #5 paste or liquid flux. Used for sheet metal, galvanized gutters, general repairs and non drinking water lines. Not to be used for plumbing. .125" gauge. Contains lead, NOT for plumbing applications. Alloy of tin, silver, copper and bismuth. Meets requirements of Safe Drinking Water Act for use on copper potable water lines. Provides excellent flow and fill characteristics. 420 to 460 degrees Fahrenheit melting range. Includes 8 oz. solid wire solder 0.117" diameter, 1.7 ozs. No.95 lead free tinning flux, acid brush, sand cloth, and how-to instructions.
Weller SP15NUS Lightweight Corded Soldering Iron Kit Safe Flo H-20-5 50691 Lead Free Flux Solder Kit SOLDER 1/8IN SW 50/50 1/2LB
Pencil-thin for fine soldering and hobby work, small or intricate jobs such as electronics kits, model railways and jewelry making. Stainless steel barrel, heat and impact resistant handle. Includes No.MT70, 1/8" diameter, replaceable, nickel-plated copper, cone shaped tip that develops 750 degrees Fahrenheit. 7"L, 120 Volts, 12 watts, 50/60 Hz. U.L. Listed. IAPMO Listed solder and water soluble flux NSF-61. Flux meets ASTM B-813 standard and is City of L.A. approved. Lead free silver solder meets ASTM B-32 standard. Kit contains: 8 oz., .117" gauge silver lead free solder, 1.7 Oz. H-20-5 water soluble flux, an applicator brush and a sand cloth. 50 percent tin and 50 percent lead. Use with appropriate type flux such as Forney 38120, Ruby Fluid, Forney 38125, Paste Flux, or Forney 38127 & 38128, Hi-Temp Fluxes. Tensile Strength: 5500 PSI. Melting Temp: 421? (216? C). NOT SUITABLE FOR ALUMINUM.
Oatey 31400 Flame Protector SOLDER 1/8IN LF S-WIRE 1/4 LB Weller SP40NUS Lightweight Corded Soldering Iron
Heat shield to protect studs, walls, floors, and other surfaces from sparks or flame and is ideal to use with propane and MAPP gas torches for applications up to 2500 degrees F. Made with Zoltek Pyron fibers, a non-asbestos flame retardant material. Size: 9" x 12". Highly recommended for potable water pipe joints, plumbing, refrigeration systems and non-electrical applications. Does not char. Flows evenly within the joint and has a low melting point. Hardens into a shiny fillet. Leaves no corrosive residue. Grade: 95/4.5/.5 Tin/Copper/Silver. Tensile Strength: 6400 PSI; Melting Temp: 430? (222? C). For hobby and electronic work. Stainless steel barrel, heat and impact resistant pencil handle. Includes No.MT10, 1/4" diameter, replaceable nickel-plated copper tip that develops 900 degrees Fahrenheit. 8-1/4"L, 120 Volts, 40 watts, 50/60 Hz. U.L. Listed.
Copper Lock 10-800 No Heat Solder Weller BP650MP Cordless Soldering Iron Oatey 20019 Wire Solder
Fast, easy, permanent; apply inside the copper connector, fit in the copper pipe and within seconds a permanent leakproof seal will occur.  Pressure may be applied after two minutes; can withstand pressures up to 500 PSI; can withstand temperatures from -60 degrees F to +300  degrees F. Meets US Military specifications. Good with all refrigerants. Powerful 6-watt/4.5-volt iron heats to working temperature in under 15 seconds. 120 solder joints per set of (3) alkaline batteries. Batteries, lead-free solder,and tip removal tool included. Replacement tips available. Storage cap with auto with power shut-off. Applications: Microelectronics, hobbies, small appliances, and more. Alloy of 50 percent tin and 50 percent lead, use with Oatey #5 paste or liquid flux. Used for sheet metal, galvanized gutters, general repairs and non drinking water lines. Not to be used for plumbing. .125" gauge. Contains lead, NOT for plumbing applications.
Weller 7200PKS Corded Soldering Gun Kit With 2-Wire Corded TORCH BRASS HD PENCIL FLAME   Safe-Flo 29024 Wire Solder
Fingertip trigger, single output from instant-heat gun-ready to solder in 6 seconds. High efficiency, tin-plated, pure copper tip. Lightweight, compact, balanced pistol-grip design with 2-wire cord. Includes No.7200 soldering gun, coil of lead-free rosin core solder, 2 tin-plated copper No.7235 standard chisel tips, and instruction leaflet. 120 Volts, 75 watts, 50/60 Hz. U.L. Listed. An all brass heavy duty pencil flame torch that can be used with MAP/Pro propane fuel or "MAPP"; allows you to perform larger jobs and finish smaller jobs quicker. The torch can handle soldering up to 1" copper tubing. Alloy of Tin, Copper, Silver, and Bismuth that works much like 50/50 solder. Recommended for use on potable water systems for sweating copper joints. Also effective on stainless steel, brass alloys, chrome alloys, galvanized steel and cast iron piping.  Works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics. 420 to 460 degrees F melting range; 0.117" diameter. Meets ASTM standard B-32 and the requirements of Safe Drinking Water Act. Can Not Be Used On Aluminum.
Weller SP25NKUS General Duty Corded Soldering Iron Kit SOLDER 1/8IN 95TIN/5ANT 1/2 LB Oatey 21018 Wire Solder
For hobbies, kits and radios. Stainless steel barrel with heat and impact resistant pencil handle. With on/off indicator light. Contains No.SP23 soldering iron, three 1/8" diameter nickel-plated copper iron tips, lead-free solder, and soldering aid tool. Tips develop 750 degrees Fahrenheit and include No.MT1 cone-shaped, No.MT2 screwdriver, and No.MT3 chisel tips. Helpful hints and instructions on card. 8-1/4"L, 120 Volts, 25 watts, 50/60 Hz. U.L. Listed. Tin-antimony "lead-free" solder can be used for soldering potable water pipe joints. Good for plumbing, refrigeration systems and other non-electrical applications where strength is required. Alloy of 40 percent Tin and 60 percent Lead; 361 degrees F-460 degrees F melting range. Commonly used for tin plating, seaming joints, copper DWV systems and sheet metal repair. Contains lead, NOT for plumbing applications.
KIT SOLDER SILVER SS TUBE     SOLDER 1/8IN LEADFREE SW 1/2LB Oatey 21305 Bar Solder
Premium high strength acid flux cored silver bearing solder for joining all metals except aluminum, magnesium and zinc die cast. 6% silver content. Stays birght and hard. Nontoxic. Joint strength up to 20,000 PSI tensile strength. Weight: 9 oz. Working temperature: 431? F (221.7? C). Application temperature: 400? F to 700? F (204? C to 371? C). Highly recommended for potable water pipe joints, plumbing, refrigeration systems and non-electrical applications. Does not char. Flows evenly within the joint and has a low melting point. Hardens into a shiny fillet. Leaves no corrosive residue. Grade: 95/4.5/.5 Tin/Copper/Silver. Tensile Strength: 6400 PSI; Melting Temp: 430? (222? C). Alloy of 50 percent Tin and 50 percent Lead; 361 degrees F ? 421 degrees F melting range. For use with copper drain piping, tin plating, seaming joints and sheet metal. Not for use on drinking water lines.
SOLDER 1/8IN50/50 SOLIDWIRE1LB SOLDER 1/8IN COM SOLIDWIRE 1LB Oatey 53171 Rosin Core Wire Solder
For general purpose use with appropriate type flux such as Forney 38120, Ruby Fluid, Forney 38125, Paste Flux, or Forney 38127 & 38128, Hi-Temp Fluxes. NOT SUITABLE FOR ALUMINUM. 5500 PSI Melting Temp: 421degrees (216 degrees C). For general purpose use with appropriate type flux such as Forney 38120, Ruby Fluid, Forney 38125, Paste Flux, or Forney 38127 & 38128, Hi-Temp Fluxes. NOT SUITABLE FOR ALUMINUM. Melting Temp: 575 degrees (299 degrees C). Lead free alloy of 95 percent Tin and 5 percent Antimony. 450 degree F ? 464 degree F melting range. Most commonly used where frequent and extreme temperature changes and vibrations occur. Contains lead, NOT for plumbing applications.
Oatey 21212 Rosin Leaded Core Solder Oatey 21115 Leaded Acid Core Solder Oatey 20015 Leaded Core Solder
40 percent tin and 60 percent lead alloy with non-corrosive and non-conductive core flux for electrical and electronic soldering such as appliance repair, radio, TV, wiring motors and non-drinking water lines; melting range of 361 to 460 degrees F. 40 percent tin-60 percent lead, .125" gauge; can not be used on drinking lines. Alloy of 50 percent tin and 50 percent lead. General purpose solder for sheet metal work, auto radiator repair and steel gutters. Not to be used on drinking water lines. .125" gauge. Contains lead, NOT for plumbing applications.
Weller BP865MP Cordless Soldering Iron Safe-Flo 29025 Wire Solder Weller SP80NUS Corded Soldering Iron
Heats up to working temperature in under 15 seconds. White LED light illuminates working surface. Dual power (hi/lo) indicated by red and green LEDs. Co-molded grip for a comfortable feel. Protective safety cap turns off power when placed on tool. Over 150 intermittent solder joints with fresh batteries. Applications: Field service repair on small parts and components. Includes:  Iron, 1 tip, 4 AA batteries, lead free solder, and tip wrench. Alloy of Tin, Copper, Silver, and Bismuth that works much like 50/50 solder. Recommended for use on potable water systems for sweating copper joints. Also effective on stainless steel, brass alloys, chrome alloys, galvanized steel and cast iron piping.  Works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics. 420 to 460 degrees F melting range; 0.117" diameter. Meets ASTM standard B-32 and the requirements of Safe Drinking Water Act. Can Not Be Used On Aluminum. For hobby work, stained glass and minor repairs. Stainless steel barrel with heat and impact resistant handle. Includes soldering iron rest and No.MT20, 3/8" diameter, replaceable nickel-plated copper tip that develops 900 degrees Fahrenheit. 9-3/4"L, 120 Volts, 80 watts, 50/60 Hz. U.L. Listed.
TORCH SELF LIGHTING           TORCH SELF LIGHTING           TORCH SELF LIGHTING HOSE 4FT
Allows for versatility and ease of operation; the brass regulator valve allows for consistent flame at any angle of operation; the adjustable flame knob allows for flame control and fuel economy; this torch can be used to perform larger jobs or accomplish smaller jobs quicker; the MT 551 can solder up to 1" of copper tubing; use with MAP/Pro propane fuel. Regulated self-lighting propane torch features a stainless steel burn tube for strength and an ergonomic handle providing comfort and durability. The regulated valve delivers the highest quality and consistent triple point flame while operating the torch at any angle. The fuel control knob provides control and economy. Auto igniter for instant flame. Use with propane fuel only. A self-lighted regulated torch that delivers a swirl flame with a 4' flexible extension hose and a belt clip to hold the fuel cylinder; can be used for MAP/Pro or propane fuels.
SOLDER 1/8IN LEAD FREE SW 1 LB SOLDER 1/8IN 95TIN/5ANT 1 LB  Oatey 22018 Lead Free Plumbing Solder
Highly recommended for potable water pipe joints, plumbing, refrigeration systems and non-electrical applications. Does not char. Flows evenly within the joint and has a low melting point. Hardens into a shiny fillet. Leaves no corrosive residue. Grade: 95/4.5/.5 Tin/Copper/Silver. Tensile Strength: 6400 PSI; Melting Temp: 430? (222? C). Tin-antimony, lead free, can be used for soldering potable water pipe joints. Good for plumbing, refrigeration systems and other non-electrical applications where strength is required. Tensile Strength: 6000 PSI. Melting Temp: 464? (240? C). Lead free alloy of 95 percent Tin and 5 percent Antimony. Most commonly used where frequent and extreme temperature changes and vibrations occur. Meets the requirements of the Safe Water Drinking Act; 450 degrees F ? 464 degrees F melting range.
TORCH SWIVEL SELF LIGHTING    SOLDER GUN KIT 140/100W 120V  TORCH ON-DEMAND TRIGGER PRO
Self-lighting MAP/Pro or propane torch has a 360 degree swivel that allows for versatility and ease of operation; the brass regulator valve allows for consistent flame at any angle of operation; the adjustable flame knob allows for flame control and fuel economy; this torch can be used to perform larger jobs or accomplish smaller jobs quicker; the MT 555 can solder up to 2" of copper tubing. 3 built-in LED's illuminate your work; 2 trigger positions 140 W/100 W; ergonomic non-slip grip; 6 seconds heat up; up to 900 degree F. A high performance Silver Swirl MAP/Pro torch that delivers a swirl flame; has an On-Demand trigger giving you instant ignition and flame shut off; has a safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting; can solder up to 2" of copper tubing; use with MAP/Pro or propane fuel.
TORCH SWIVEL ON-DEMAND TRIGGER Dewalt DC527 Cordless Area Light Milwaukee 2735-20 M18 Cordless Work Lights
A high performance torch that delivers a swirl flame; has an On-Demand trigger giving one instant ignition and flame shut off; has safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting; can solder up to 2" of copper tubing. Tool only. Built-in telescoping and 360 degree rotating hook allows unit to hang, over molded lens cover provides increased durability, 13 Watt fluorescent bulb provides bright area lighting, twist and lock tool free lens cover, pre-heat circuit helps eliminate blackening at the base of the bulb, 3.5 hours of run time. Battery sold separately. Red Lithium battery delivers more work per charge and more work over pack life. Sealed aluminum head designed for impact and weather resistant durability. 135 degree rotating head provides flexible, focused illumination at the desired work area, while its integrated hook leaves both hands free for work anywhere on the jobsite. 8.5" length.
TORCH ON-DEMAND TRIGGER PRO   Weller Professional D550 Corded Soldering Gun LANTERN/FLASHLGT CRDLS LED 18V
A high performance Silver Swirl MAP/Pro torch that delivers a swirl flame; has an On-Demand trigger giving you instant ignition and flame shut off; has a safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting; can solder up to 2" of copper tubing; use with MAP/Pro or propane fuel. High output with 2-position trigger selection of dual heats. Heavy-gauge, high efficiency, tin-plated copper tip comes up to temperature in 6 seconds. Balanced pistol-grip design with twin lights to illuminate work and 2-wire cord. Includes soldering hints booklet. 120 Volts, 260/200 watts, 50/60 Hz. U.L. Listed. The 18V LXT Lithium-Ion Cordless LED Lantern/Flashlight (model DML806) is a 2-in-1 work light providing ultra-bright illumination, versatility, and convenience. There are three LED lighting modes: 360-degree lantern, 180 degree lantern, and flashlight mode. These versatile settings allow the user to select between lighting the entire work area or a specific task or work surface. The fast-charging 18V LXT Lithium-Ion 5.0Ah battery (sold separately) delivers 11 hours of continuous illumination on a single charge in the 360-degree lantern mode, up to 21 hours in the 180-degree lantern mode, and up to 59 hours in flashlight mode. It is fully compatible with Makita 18V Lithium-Ion batteries. Battery and charger sold separately.
LXT BML185 Cordless Handheld Flashlight Weller D550PK Corded Soldering Gun With Twin Lights Dewalt DCL510 Cordless Work Light
Tool only. 4-position head pivots for greater versatility. Compact design at only 11-1/8" long and weighs over 2 lb. Soft grip handle provides increased comfort. Includes shoulder strap, two Xenon bulbs. Up to 4 hours run time. Uses 18V LXT lithium-ion. High output with 2-position trigger selection of dual heats. Heavy-gauge, high efficiency, tin-plated copper tip comes up to temperature in 6 seconds. Balanced pistol-grip design with twin lights to illuminate work. Includes No.D550 soldering gun, 1 soldering tip, 1 sealing tip, 1 cutting tip, flux brush, soldering aid tool, coil of lead-free rosin core solder, sturdy plastic carrying case and soldering hints booklet. 120 Volts, 260/200 watts, 50/60 Hz. U.L. Listed. Bright LED output of 130 Lumens, head rotates 360 degrees and pivots, powerful magnet for hands free use in multiple placements, kick stand for hands free use in multiple placements, 4 hours of run time. Battery not included.
WORKLIGHT HAND HELD LED 20V   Dewalt DCL040 Cordless Rechargeable Work Light Dewalt DW919 Cordless Flexible Flood Flashlight
Bright LED output - 160 Lumens. Kick stand, belt hook, hanging and hands free use in multiple placements. Powerful magnet for hands free use. Head rotates 360 degrees and pivots. Run-time of up to 27 hours when fully charged. Tool weighs only 1.5 lbs. Flashlight features bright LED output, 11 hours run-time and head rotates 120-degrees. Integral hook for hands free use in multiple placements. 110 lumens. Battery not included. Wide angle beam maximizes light over a specific work area, flexible neck allows for hands-free operation and light to be projected in any direction, lockable head clip offers, extra bright Xenon bulb maximizes brightness of the beam, 3 hours of run time. Battery sold separately.
LIGHT AREA 20V MAX            SPOT-LIGHT M12                Oatey 30712 Acid Brush
SPOT-LIGHT M12
Our Price: $69.59
3 bright LEDs illuminate dark jobsite work areas. 2 brightness settings 500 and 250 Lumens provides flexibility for maximum light output or extended run time. 140 degree pivoting head provides versatility for lighting work surfaces. Built-in telescoping and 360 degree rotating hook allows unit to hang from 2" materials and multiple locations. Over molded lens cover provides increased durability and a non-marring surface for the jobsite. Run-time 3 - 17 hours. Battery and charger not included. Up to 700 yard beam distance. 3 light output modes for distance, clarity and safety. High Mode: 750 lumens for up to 4 hours with M12 XC 4.0 pack. Low Mode: 400 lumens for up to 8 hours with M12 XC 4.0 pack. Strobe Mode: 800 lumens for up to 8 hours with M12 XC 4.0 pack. Moisture resistant rated for use in all weather conditions. Weighs 1.4 lbs. Dimensions: 6.5"L x 11.97"H Use for applying liquid or paste fluxes.
LANTERN/FLDLGHT CDLSS LED 12V Black & Decker 7698K Reversible Corded Planer LIGHT METAL LED M12
LIGHT METAL LED M12
Our Price: $77.47
High definition lighting technology with over 400 Lumens, the new unit delivers unmatched light output to illuminate large work areas. 180 degree - 360 degree adjustable beam allows the user to select between area and task lighting. 2.1A USB charger for tablets, smart phones and other electronic devices. Rugged design featuring an impact resistant lens, IPx4 rating and can withstand 6' drops. Four light settings: high, medium, low and strobe. Two stainless steel hooks designed to be used as a hook or a handle. Weighs only 1.0 lbs. with a length of 10.6". M12 RedLithium battery (Not Included). High torque motor for long life and deep cutting capacity, deep cutting capacity removes more material in a single pass, lock on button for added convenience during extended use, chamfering groove for decorative edging, front depth adjustment handle, 4 solid reversible HSS blades, 10 positive stops for accurate and precise material removal, vacuum dust adapter provides connection port for vacuum. Specs: 16,500RPM, 5/64" deep cutting capacity, 5/16" rabbeting depth capacity. Includes: planer, (4) reversible HSS blades, edge guide, dust bag, vacuum adapter, hex wrench, user's guide, kit box. Powerful LED produces 800 Lumens of high definition light output and it can cast a beam beyond 375 yards. Sliding head allows users to adjust their beam pattern from a flood to a spot effortlessly and it features three output modes for high, low or strobe use. The body is built from machined 6000 series aluminum with a type II anodized finish and can handle anything it may encounter through years of professional use. On high mode; 800 Lumens for 5 hours of run time. Low mode; 325 Lumens for 7 hours of run time. Weighs 1.2 lbs. Dimensions: 9"L x 2.50"W x 2.50"H.
LIGHT FLOOD M12               LANTERN/FLDLGHT CDLSS LED 18V FLOODLIGHT CDLSS LED L-ION 18V
LIGHT FLOOD M12
Our Price: $79.60
Gives users the ultimate flood light for on the go use. Adapts, performs and survives any work environment users come across.  Compact size and integrated hanging features like its strong magnets, spring loaded clamp, key hole hanger and wire hanger. Capable of lighting up a large workspace for extended periods of time as it provides 1,000 lumens of high definition light output in it high mode, 400 lumens in medium and 200 lumens of output in low mode. It uses high quality LED with a neutral white color and a high color rendering index paired with a Milwaukee designed reflector to produce an even beam pattern. Impact and chemical resistant lens is able to withstand the toughest of jobsite conditions. LEDs never need to be replaced. Weighs 2.19 lbs. Dimensions: 7.5"L x 5.75"W x 5.5"H. Adjustable beam 180-360 degrees, 2.1 USB charger, impact resistant lens., four light settings, two stainless steel hooks. Uses M18 Redlithium battery. 11.5l., 1.2 LBS., 700 lumens. Designed to illuminate large work spaces on the jobsite, the cordless flood light uses 8 high-quality LEDs to provide 1,100 lumens and up to 1,300 lux. It's powered by the M18 Redlithium battery for up to 8 hours of run time on a single charge. With its roll cage design and impact-resistant, replaceable lens, it stands up to the toughest working conditions. This compact floodlight features an octagonal shape so the light may be used at multiple angles. The versatile hanger provides hands-free use in a variety of applications. Weighs 3.4 lbs. Dimensions: 8-3/4"L x 6-1/4" W x 6-1/4"H. Tool only, batteries not included.
TORCH KIT W/SWIVEL TRIGGER    SPOTLIGHT LED CORDLESS 20V MAX FLOOD LGT CRDLS/CRDD 20LED 18V
A high performance torch that delivers a swirl flame; has an On-Demand trigger giving one instant ignition and flame shut off; has safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting; can solder up to 2" of copper tubing. Includes 14.1 oz. disposable MAP/Pro cylinder. 3 bright LEDs illuminates dark jobsite work areas. 1000 and 90 Lumens. 1 bright red LED to preserve night vision. 2 brightness settings provides flexibility for maximum light output or extended runtime. 90 degree pivoting head provides versatility for lighting work surfaces. Can be seen up to 508 yards or 1,525 feet. Pivoting head allows for hands free operation and light to be projected in multiple directions while standing on its base. Belt hook to provide increased versatility for transportation and a hands free use in multiple placements. Integral hook for hands free use in multiple placements. Over-molded lens cover provides increased durability and  a non-marring surface for the jobsite. Light, weighs only 1.42 lbs. Batteries and charger not included. The 18V LXT Lithium-Ion Cordless/Corded LED Floodlight (DML805) offers the convenience of cordless or corded operation, and provides bright and even lighting for large work spaces without the high heat of halogens. At full brightness it provides 750 lumens of light, and 450 lumens on low mode. The fast-charging 18V LXT Lithium-Ion 4.0Ah battery (sold separately) delivers 10.5 hours of continuous illumination on a single charge. It also features Extreme Protection Technology (XPT) for improved dust and water resistance. It is fully compatible with Makita 18V Lithium-Ion batteries. Battery and charger sold separately.
SEARCH LIGHT LED              LIGHT AREA 18VOLT/20VOLT MAX  PLANER 3-1/4IN 6.5AMP
SEARCH LIGHT LED
Our Price: $99.84
PLANER 3-1/4IN
Our Price: $123.96
Spot farther, flood brighter. 198? of rotation. 4 output modes: spot/flood, spot, flood or strobe. High definition; 1,250 Lumens with 700 yards of beam distance. Dust and water resistant. Impact resistant. Low battery indicator (Battery Not Included) alerts users when the battery is nearing end of charge. Weighs 3.1 lbs. Dimensions: 12.9"L x 5.5"W x 4.7"H. LEDs illuminate without the high heat of Halogens. Multi-port battery interface is compatible with 18 volt and 20 volt max batteries. Adjustable light head allows the light to be directed where it is needed. Ideal for portability and use in small spaces. Tool weighs only 3.27 lbs. Batteries Not Included. Delivers for pros who need to plane doors or other surfaces quickly and evenly. 6.5 amp motor produces 16,500 rpm for fast stock removal and smooth finishes. The tool's ambidextrous lock-off release button helps prevent accidental starts and has a lock-on button for extended operation. The aluminum front and rear shoes are precision machined together for accuracy and the tool has a machined groove for chamfering. Its counterbalanced blade design puts the blade at an ideal cutting angle and eliminates uneven planing caused by misaligned blades. Weighs only 6.3 lbs. It comes equipped with a reversible Bosch Woodrazor micro grain carbide blade. The tool also provides a spring loaded stand that elevates the planer to protect the blade. The dual mount guide fence can be mounted on either side of the tool, with a plastic overshoe that offers protection for the work-piece surface. The dust port accommodates a large shavings bag. This planer is built with a poly micro-V drive belt for enhanced belt durability and a ball joint cord swivel for enhanced ease of positioning the tool and cord. Includes (1) Reversible Woodrazor blade, (1) Dual-mount guide fence, (1) No-mar plastic overshoe for fence, (1) shavings bag and (1) blade wrench.
Dewalt D26676 Portable Corded Hand Planer LIGHT FLOOD LED HP M18        LIGHT COMPACT W/FLOOD MODE
LIGHT FLOOD LED HP M18
Our Price: $148.96
LIGHT COMPACT W/FLOOD MODE
Our Price: $151.81
Motor provides a smooth, even finish in the hardest of woods with resharpenable high speed steel blades also accepts reversible carbide blades, calibrated depth adjustment knob. Precision machined front and back aluminum shoes with groove in front shoe, kickstand, poly-V drive belt, ergonomic handle. Specs: 17,000 rpm no load speed, 1.5mm/1/16" depth of cut, 3-1/4" planning width, 23/64" rabbeting depth, weighs 6.0 lbs. Includes: (2) resharpenable high-speed steel blades (installed), (1) rabbeting fence, (1) blade depth setting gage, (1) blade resharpening tool and (1) socket wrench. Features a 20 percent brighter flood light. Three light output modes for optimal brightness and run time. High Mode: 3,000 lumens for up to 2 hours with M18 XC 5.0 pack. Medium Mode: 1,500 lumens for up to 4 hours with M18 XC 5.0 pack. Low Mode: 650 lumens for up to 9 hours with M18 XC 50. High definition output with true color, even beam and natural light. Dual power source: M18 or corded. Light head rotates 240 degrees with positive stops. (3) integrated keyholes for hanging horizontally or vertically. Durable roll cage protects light head. The M18 Radius Compact Site Light with Flood Mode offers the user two lights in one for area lighting and tasking lighting. With 2,200 lumens of output in area mode for illuminating large work areas and 1000 lumens of flood lighting for task situations there is no application this light can?t handle. This light offers up to 18 hours of runtime with an M18 XC 5.0 battery and has the option to be plugged in using its AC inlet for extended runtime. Its compact size allows users to take this site light on and off the jobsite effortlessly and its 4-1/4" metal hanging hook allow users to hang this light from above for overhead lighting situations. Equipped with a high impact polycarbonate lens to withstand harsh jobsite abuse. Its high quality LEDs never need to be replaced.
Makita KP0800K Corded Planer Kit PLANER BRUSHLESS 20V MAX      TRIPOD LIGHT (BARE) 20V
PLANER BRUSHLESS 20V MAX
Our Price: $182.96
TRIPOD LIGHT (BARE) 20V
Our Price: $193.32
High power-to-weight ratio, two-blade cutter head, equipped with double edge carbide blades, easy blade setting system, machined aluminum base, rigid die-cast aluminum housing with all ball bearing construction,machined aluminum and balanced planer drum, lock on button, depth adjustment knob with easy to read scale, rubberized front and rear handles, spring-loaded stand, poly-v belt, double insulated. Specs: 3-1/4" planing width, 3/32" planing depth, no load RPM 17,000, size (LxWxH) 11-1/4"x6-1/4"x6-1/8", weighs 5.7lbs. Includes: blade gauge assembly, wrench, guide rule, blade set, tool case. Brushless motor provides power and run-time. 5/64" (2mm) maximum depth of cut. Precision-machined front and back aluminum shoes ensure parallelism of cut. Precision machined groove in front shoe allows for edge chamfering. Ergonomically designed handle provides greater comfort and less fatigue. 20 volt Max; 32,000 cuts per minute achieve a fast removal rate. Calibrated depth adjustment knob to 1/16" (1.5mm approximately). Kickstand allows user to rest the planer on work surface without gouging the material. Poly-V belt provides increased belt durability. No load speed 15000 rpm. Tool weighs 5.5 lbs. Includes user's guide, guide fence and wrench. BATTERY AND CHARGER NOT INCLUDED. Illuminates workspace in the toughest jobsite conditions. Build for incredible durability in use, storage, or transport. Cutting edge LED technology provides extended runtime and natural white light. Variable brightness settings up to 3,000 lumens let you customize illumination for your work area. Compact design with carry handle provides easy portability and it sets in seconds. Rotating, pivoting head directs light where you need it. 39" H, 9? length L, 39" height, 16 Lbs. weight.
TOWER LIGHT DUAL POWER LED M18 M-Spector M12 2313-21 Cordless Inspection Camera Kit Dewalt DCT410S1 Cordless Inspection Cameras
The brighter, tougher, taller stand light. The LED Tower Light is designed to give professionals an area lighting solution that adapts, performs and survives industrial use unlike any other portable work light. Can be set up in seconds with it max extension 7' high and it collapses down to 40" for easy transport and storage. The light head can be extended from 4-7' to light overhead work or minimize shadows when casting light downward. Capable of filling large areas with light, it provides 2,500 lumens of high definition light output in high mode, 1,100 in medium and 700 in low. Power by M18 RedLithium XC 5.0 battery pack or extension cord (not included). It uses high quality LEDs with a neutral white color and a high rendering index paired with a Milwaukee designed reflector to produce an even beam pattern. Its reinforced legs are impact resistant and its low center of gravity provides a stable base. The light head is protected by an impact resistant lens and bezel and it nests into a protective shroud for secure transport and storage. Its LEDs never need to be replaced. Features: screen rotates providing user fluid image control; Optimized 2.7" high resolution color LCD; 9mm 640x480 pixel digital image sensor; 4 LED lights, 5 settings; 3' cable length, 320 x 240 display resolution aluminum head and improved flexibility deliver unmatched durability and pipe maneuverability. Includes M12 Red Lithium battery, 30 minute charger, hook, magnet and mirror attachments and carrying case. Camera features a wireless 3.5-inch LCD screen that is removable to provide visibility in tight areas, a waterproof, 3' cable and the ability to instantly capture videos and photos, offers increased visibility with a 3x zoom capability. Includes:  (1) 12V Max battery, hook and magnet tools to aid in retrieval of objects.
LIGHT AREA BLUTOOTH AC/DC BARE
Corded/cordless Bluetooth LED large area light with built-in battery charger. Helps to illuminate work areas with a maximum of 7,000 lumens. With AC/DC capability, the light runs off any Dewalt 20 volt max battery and can also charge Dewalt slide pack batteries with versatility. The light features instant on/off with no warm-up, dimming as low as 500 lumens, right/left head and is stackable with a wheel option for convenient storage. Users can connect multiple large area lights for added illumination or to power a corded tool. Works in conjunction with the expanded Dewalt Tool App allowing it to be controlled from a users Smartphone or tablet. In addition to the convenience of the Tool Connect app, the light can be programmed to turn on or off at scheduled times automatically. Weighs 27 lbs.
   
 
1