Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > TORCHES / SOLDERING > ELEC SOLDERING GUN ACCESS
Sort By:
1
Oatey 30011 No. 5 Paste Flux Oatey No. 95 Tinning Flux Nokorode 14000 Regular Paste Flux
Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder. With Oatey silver solder powder added to pre-tin copper pipes. Cleans, fluxes and tins. Lead free, can be used on potable water systems. For clean sweat copper fittings, no pre-cleaning needed. Do not use on electrical parts. Formulated with the same quality as Oatey No.5 flux. Will work for large diameter copper and does not turn copper green. Can never burn out. Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2.
Rectroseal C-Flux Soft Soldering Flux Nokorode Aqua Flux 74044 Paste Flux Oatey 53017 Lead Free Soldering Paste Flux
Lead free, high quality flux containing powdered solder which provides added insurance for a leak free joint. For use with 95/5, 60/40, 50/50, and 40/60 solders. Creamy, smooth paste formulated to meet ASTM B-813 specifications. Water washable, so it can be flushed from the piping system to limit corrosion. Lead-free and may be used with all types of soft solder including 95/5, 60/40, 50/50 and 40/60 solders. Will not run or drip off acid brushes, pipes and fittings during application. Superior wetting ability allows solder to flow easily and uniformly into joints. Pre-cleans and resists splattering. Conforms to ASTM B-813 specifications. Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder.
Oatey No. 95 Tinning Flux Oatey 30130 Water Soluble Flux FLINT RENEWALS
With Oatey silver solder powder added to pre-tin copper pipes. Cleans, fluxes and tins. Lead free, can be used on potable water systems. For clean sweat copper fittings, no pre-cleaning needed. Do not use on electrical parts. Formulated with the same quality as Oatey No.5 flux. Will work for large diameter copper and does not turn copper green. Can never burn out. Cleans, removes oxidation, makes solder flow smoothly. Works with all solid wire solders. White paste with low odor. For potable plumbing, copper fire sprinkler and hydronic heating systems. Meets ASTM B-813 standard. IAPMO listed. Flint renewals for spark lighter (5) individual flints.
Oatey 30013 No. 5 Paste Flux Nokorode 14010 Regular Paste Flux Nokorode Aqua Flux 74047 Paste Flux
Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder. Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Creamy, smooth paste formulated to meet ASTM B-813 specifications. Water washable, so it can be flushed from the piping system to limit corrosion. Lead-free and may be used with all types of soft solder including 95/5, 60/40, 50/50 and 40/60 solders. Will not run or drip off acid brushes, pipes and fittings during application. Superior wetting ability allows solder to flow easily and uniformly into joints. Pre-cleans and resists splattering. Conforms to ASTM B-813 specifications.
LIGHTER FLINT SPARK           PASTE FLUX FOR SOLDER 2 OZ    Oatey 30106 Soldering Liquid Flux
Spark lighter with replaceable flints; used to ignite non-self-lighting torches. Plumbers, workers in brass, copper, tin, steel and stained glass will achieve superior results. Produce strong, neat and durable joints. Ruby Fluid allows solder to flow in a thin film. Adheres quickly and stays where it is applied. Cleans and fluxes. Formulated with strong cleaning agent, no need to clean oxidized copper. Ensures fast and effective soldering. Can be used for HVAC applications.
Oatey H-205 Water Soluble Flux Oatey H-2095 Water Soluble Tinning Flux Weller 7250W Standard Soldering Tip
Flux for Copper Pipe. As thick as No. 5 flux. Cleans, removes oxidation, makes solder flow smoothly. Works with all solid wire solders. White paste with low odor. For potable plumbing, copper fire sprinkler and hydronic heating systems. Meets ASTM B-813 standard. Made in USA. With solder powder added to pre-tin pipes. For potable plumbing, copper fire sprinkler and hydronic heating systems. Safe, lead free, water flushable. Resists burning, will not separate in extreme heat. Stays soft in cold weather. Excellent draw capabilities, as thick as No.5 flux. Meets ASTM B-813, IAPMO Listed. Made of copper, for Weller soldering guns. Specs: Tip Width O/D .22 in.; Reach/Length 2.57 in.
Rectroseal C-Flux Soft Soldering Flux Weller 7135N Standard Soldering Tip Weller 7135W Standard Soldering Tip
Lead free, high quality flux containing powdered solder which provides added insurance for a leak free joint. For use with 95/5, 60/40, 50/50, and 40/60 solders. Made of copper, for Weller soldering guns. Specs: Tip O/D  .165 inches; Reach/Length .885 inches. Made of copper, for Weller soldering guns. Specs: Tip Width O/D .165 in.; Reach/Length .885 in.
LIQUID FLUX FOR SOLDER 2 OZ   Nokorode 14020 Regular Paste Flux SPREADER FLAME
Plumbers, workers in brass, copper, tin, steel and stained glass will achieve superior results. Produce strong, neat and durable joints. Ruby Fluid allows solder to flow in a thin film. Adheres quickly and stays where it is applied. Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Flame spreader.
Dewalt DW9063 Replacement Xenon Flashlight Bulb Nokorode 14030 All Purpose Regular Paste Flux Dewalt DW9083 Replacement Xenon Flashlight Bulb
Xenon bulb supplies 281 lumens. Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Xenon bulb supplies 281 lumens.
Dewalt DW9043 Replacement Xenon Flashlight Bulb Dewalt DC5273 Replacement Fluorescent Lamp TORCH BUTANE MICRO 3-IN-1
Xenon bulb supplies 281 lumens. Fluorescent bulb provides bright area light. 4 prong bulb base provides support to bulb for durability. Replacement bulb for 18-volt fluorescent area light, 4-volt cordless area light and DC527 (529.1596) 18-volt cordless area light. Refillable, self-lighting micro butane torch; flame adjustment; continuous flame lock; built-in stand and protective cap included; convertible triple function tip; solder tip; hot blow; precision flame; BUTANE FUEL ONLY. General uses: electronic repair, heating shrink tube, small jewelry repair, crafts and hobby, automatic repair, general lighting and cooking.
GRINDER ANGLE 4.5 IN          TORCH BUTANE MICRO KIT W/CASE Skil 9295-01 Corded Angle Grinder
Soft grip barrel handle. Lock-on switch. Die-cast aluminum gear housing. 2-position assist handle. Includes 4-1/2" grinding wheel, auxiliary handle and wrench. Refillable, self-lighting micro butane torch; flame adjustment; continuous flame lock; built-in stand and protective cap included; convertible triple function tip; solder tip; hot blow; precision flame; BUTANE FUEL ONLY. General uses: electronic repair, heating shrink tube, small jewelry repair, crafts and hobby, automatic repair, general lighting and cooking. Kit contents: solder tip, hot knife tip, hot blow tip, sponge, rosin core solder and plastic carry case. Tool less guard adjustment, heavy duty metal gear housing for added durability, compact grip design for comfort and control. Specs: 120V, 4-1/2" cut-off disc, no load RPM: 11,000. Includes: (1) metal grinding wheel, side assist handle, spanner wrench.
TORCH BUTANE TABLE TOP 3-IN-1 Black & Decker 7750 Corded Angle Grinder Porter-Cable PC60TAG Corded Angle Grinder
Butane powered torch with child-resistant automatic ignition system flame adjustment; 3-in-1 torch tip: precision flame tip, hot blow tip and solder tip; adjustable, wind-resistant flame; runs for approximately 90 minutes (minimum setting) on each fill; torch has standard universal butane refill port; compact size and ergonomic grip; comes with table top stand; continuous flame switch allows for hands-free operation; BUTANE FUEL ONLY. Metal gear case for durability and longer life, convenient slide switch for easier use, two Position side handle provides added comfort and control, spindle lock for easy accessory changes, contoured body grip for added comfort and control. Specs: 10000 RPM, spindle size 5/8"-11. Includes: metal grinding wheel, spanner wrench. Cast metal gear case increases jobsite durability and tool longevity, Tool-free change guard provides fast and easy guard removal. Spindle lock feature allows for single wrench bit changes. 3-position side handle allows greater control in multiple positions. Specs: 11,000 rpm, 5/8" x 11" spindle and weighs 4.1 lbs. Includes slide switch with lock-on, side handle, grinding wheel, wrench and wheel guard.
Rockwell RC4700 Corded Angle Grinder Black & Decker G950 Small Corded Angle Grinder TORCH BUTANE MULTI PURPOSE
Slim body for a secure grip, metal gear case, tool less safety guard adjustments instantly, two position auxiliary handle, slide on/off switch, spindle lock for easy disc replacement, soft grip handle. Specs: 120V/60Hz,no load speed 11000 RPM, 4-1/2" disc, disc bore 7/8", spindle thread  5/8"-11, weight  4.2 lbs. Includes 10 ft. cord, (1) auxiliary handle, (1) spanner. Powerful motor for fast, efficient grinding, metal gear case adds durability and extends the life of the tool, extended handle for added comfort and control, trigger switch allows for ease of use when wearing gloves, three position side handle adds comfort and control. Specs: 10000 RPM, spindle size 5/8"-11. Includes: (1) metal grinding wheel, spanner wrench, side handle. Integrated ignition button for easy startup, no independent ignition tool required; variable temperature and flame control for verstile use in both torch and flame mode; 9-piece for wide array of verstile applications; detachable base for hands-free operation; premium quality for long life, durability; filling valve for quick recharge.
Dewalt DC527 Cordless Area Light Bernzomatic 333251 Oxygen Cylinder Bernzomatic 304182 Propane Cylinder
Tool only. Built-in telescoping and 360 degree rotating hook allows unit to hang, over molded lens cover provides increased durability, 13 Watt fluorescent bulb provides bright area lighting, twist and lock tool free lens cover, pre-heat circuit helps eliminate blackening at the base of the bulb, 3.5 hours of run time. Battery sold separately. Oxygen cylinders have a CGA 601 valve with left-hand threads. Cylinders are designed to meet Title 49 CFR DOT specification 39 primarily for containing liquefied gas. Propane cylinders have a CGA 600 valve with 1.000 - 20 UNEF-RH - EXT thread. Cylinders are designed to meet Title 49 CFR DOT Specification 39 primarily for containing liquefied gas.
Milwaukee 2735-20 M18 Cordless Work Lights GRINDER CDLSS CUTOFF 20V MAX  LANTERN/FLASHLGT CRDLS LED 18V
Red Lithium battery delivers more work per charge and more work over pack life. Sealed aluminum head designed for impact and weather resistant durability. 135 degree rotating head provides flexible, focused illumination at the desired work area, while its integrated hook leaves both hands free for work anywhere on the jobsite. 8.5" length. High performance motor produces 8,500 rpm for aggressive cutting, removal and finishing. Cast metal gear housing helps dissipate heat during extended use. Contoured over molded handle optimized for increased comfort. Spindle lock allows for quick and easy wheel changes. 3 position side handle provides control in multiple positions. Tool free guard makes guard adjustments quick and easy.  20 volt max system - high performance cordless platform. 14" length; weighs only 5 lbs. Battery And Charger Sold Separately. The 18V LXT Lithium-Ion Cordless LED Lantern/Flashlight (model DML806) is a 2-in-1 work light providing ultra-bright illumination, versatility, and convenience. There are three LED lighting modes: 360-degree lantern, 180 degree lantern, and flashlight mode. These versatile settings allow the user to select between lighting the entire work area or a specific task or work surface. The fast-charging 18V LXT Lithium-Ion 5.0Ah battery (sold separately) delivers 11 hours of continuous illumination on a single charge in the 360-degree lantern mode, up to 21 hours in the 180-degree lantern mode, and up to 59 hours in flashlight mode. It is fully compatible with Makita 18V Lithium-Ion batteries. Battery and charger sold separately.
LXT BML185 Cordless Handheld Flashlight Bosch 1375A Small Mini Corded Grinder with Slide Switch BUTANE CYLINDER 5.6OZ
Tool only. 4-position head pivots for greater versatility. Compact design at only 11-1/8" long and weighs over 2 lb. Soft grip handle provides increased comfort. Includes shoulder strap, two Xenon bulbs. Up to 4 hours run time. Uses 18V LXT lithium-ion. Lock on/off switch for extended use applications, ServiceMinder brushes eliminates guesswork and stops the tool when preventative maintenance is required, epoxy coated field windings provides ultimate protection against abrasive dust and metal debris, 5/8"-11 spindle, spindle lock for quick wheel changes, two position auxiliary handle specifically designed and angled to a natural position, double insulated, UL listed, complies to OSHA. Specs: 120V/AC, 4-1/2" cut-off disc, max. motor HP 1, no load RPM 11,000, 5/8"-11  spindle thread, length 10-1/2", weight 3.75 lbs. Includes: guard, auxiliary handle, flange kit (inner and outer wheel flanges), spanner wrench, abrasive wheel. Universal fuel tip and additional tips in cap.
Dewalt DCL510 Cordless Work Light Makita GA4030K Corded Die Grinder WORKLIGHT HAND HELD LED 20V
Bright LED output of 130 Lumens, head rotates 360 degrees and pivots, powerful magnet for hands free use in multiple placements, kick stand for hands free use in multiple placements, 4 hours of run time. Battery not included. Labyrinth construction seals and protects the motor and bearings from dust and debris, all ball bearing design and metal gear housing, externally accessible brushes, protective varnish seals the armature, machined bevel gears, side handle is positioned at an increased 20 degree angle for comfort and control. Specs: 120V, 4" grinding wheel, sanding disc, 3" wire cup brush, no load speed 11,000 RPM, spindle thread m10x1.25", length 10-1/2", weight 3.7 lbs. Includes: 4" grinding wheel, wheel guard, lock nut, lock nut wrench, side handle, inner flange, plastic tool case. Bright LED output - 160 Lumens. Kick stand, belt hook, hanging and hands free use in multiple placements. Powerful magnet for hands free use. Head rotates 360 degrees and pivots. Run-time of up to 27 hours when fully charged. Tool weighs only 1.5 lbs.
Hitachi G12SR3 Corded Angle Grinder Milwaukee 6130-33 Small Corded Angle Grinder GRINDER SLIM 7.5A 1/2IN
GRINDER SLIM 7.5A 1/2IN
Our Price: $61.08
Spindle lock provides easy and quick disc changes, tool rest to protect the user and prolong tool life, slide switch with a quick-off feature to shut off the tool immediately, removable side handle, carbon brush access allows user to replace brush as needed, lightweight design facilitates maneuverability. Specs: 1,010 max watts out, no-load speed 11,000 RPM, 4.5" wheel diameter, slide switch, spindle thread M10 x 1-1/4, spindle lock, sealed switch, length 10". Includes: wrench, side handle, 5 depressed center wheel, plastic carrying case. Compact and light grinder features debris baffle which protects internal components, multi-port exhaust reduces motor burn-up, tool free and burst resistant guard. Specs: wheel diameter  4-1/2", slide switch, max watts out (power)  750, speed rpm 11000, 120V (AC only), epoxy motor protection, double insulated 8'  cord, spindle thread  5/8-11", easy actuation spindle lock, length  10.25", weight  3.5 lb. Includes: grinder, 4-1/2" type 27 grinding wheel, type 27 guard, spanner wrench. A light, ergonomic grinder with a slender grip circumference that allows users to work comfortable for extended periods. This 4.2 lb tool delivers plenty of power, with a 7.5 amp motor that produces 11,000 no-load rpm. It has directed air flow that diverts dust away from vital components. Bosch's Service Minder brush system shuts off the tool when preventative maintenance is required, which helps to eliminate guesswork. This grinder has a two position side handle. It has a burst protection quick adjustable guard designed for user protection, as well as a large spindle lock for easy disc changes. Includes (1) Auxiliary handle, (1) wheel guard, (1) flange kit, (1) spanner wrench and (1) 4-1/2" abrasive wheel.
Dewalt DCL040 Cordless Rechargeable Work Light Dewalt DW919 Cordless Flexible Flood Flashlight Dewalt DWE4011 Small Corded Angle Grinder
Flashlight features bright LED output, 11 hours run-time and head rotates 120-degrees. Integral hook for hands free use in multiple placements. 110 lumens. Battery not included. Wide angle beam maximizes light over a specific work area, flexible neck allows for hands-free operation and light to be projected in any direction, lockable head clip offers, extra bright Xenon bulb maximizes brightness of the beam, 3 hours of run time. Battery sold separately. For sharpening, grinding, rust removal and surface preparation. Metal gear case adds durability and extends the life of the tool. 7 amp motor for fast, efficient grinding. Trigger switch allows for ease of use when wearing gloves. Extended handle with rubber grips for added comfort and control. 3 position side handle adds comfort and control in a variety of applications. Spindle lock. Easy accessory changes. 1,000 rpm. Spindle size: 5/8''-11''.  Includes: 4-1/2'' small grinder, (1) metal grinding wheel, (1) spanner wrench and (1) side handle.
Makita GA4530X Corded Angle Grinder LIGHT AREA 20V MAX            SPOT-LIGHT M12
SPOT-LIGHT M12
Our Price: $69.59
Rotatable gear housing can be positioned every 90 degrees for cutting applications, grinder has externally accessible brushes, protective varnish seals the motor from contaminants and reduces heat, all ball bearing design and metal gear housing , machined bevel gears. Specs: 11,000 no load RPM, 5/8" x 11 spindle thread (UNC), 10-1/2" x 5" x 4-1/16" overall length,  weight 3.1 lbs. Includes: 4-1/2" grinding wheel, sanding disc,  3-1/2" wire cup brush , wheel guard, lock nut, lock nut wrench, side handle, inner flange. 3 bright LEDs illuminate dark jobsite work areas. 2 brightness settings 500 and 250 Lumens provides flexibility for maximum light output or extended run time. 140 degree pivoting head provides versatility for lighting work surfaces. Built-in telescoping and 360 degree rotating hook allows unit to hang from 2" materials and multiple locations. Over molded lens cover provides increased durability and a non-marring surface for the jobsite. Run-time 3 - 17 hours. Battery and charger not included. Up to 700 yard beam distance. 3 light output modes for distance, clarity and safety. High Mode: 750 lumens for up to 4 hours with M12 XC 4.0 pack. Low Mode: 400 lumens for up to 8 hours with M12 XC 4.0 pack. Strobe Mode: 800 lumens for up to 8 hours with M12 XC 4.0 pack. Moisture resistant rated for use in all weather conditions. Weighs 1.4 lbs. Dimensions: 6.5"L x 11.97"H
Makita 9557NB Corded Angle Grinder LANTERN/FLDLGHT CDLSS LED 12V LIGHT METAL LED M12
LIGHT METAL LED M12
Our Price: $77.47
All ball bearing design and metal gear housing, rotatable gear housing can be positioned every 90 degrees, lock-on/off feature, AC/DC switch for use with alternative power source, protective varnish seals the armature from dust and debris, extra large paddle switch, thicker coil wires are wound more closely to reduce heat and energy loss.  Specs: 120V, grinding wheel, sanding disc - 4-1/2", wire cup brush 3-1/2", no load speed 10,000 RPM, 5/8"x11 UNC spindle thread, length 10-5/8", weight 4.5 lbs. Includes: 4-1/2" grinding wheel, wheel guard, lock nut, lock nut wrench, side handle, inner flange. High definition lighting technology with over 400 Lumens, the new unit delivers unmatched light output to illuminate large work areas. 180 degree - 360 degree adjustable beam allows the user to select between area and task lighting. 2.1A USB charger for tablets, smart phones and other electronic devices. Rugged design featuring an impact resistant lens, IPx4 rating and can withstand 6' drops. Four light settings: high, medium, low and strobe. Two stainless steel hooks designed to be used as a hook or a handle. Weighs only 1.0 lbs. with a length of 10.6". M12 RedLithium battery (Not Included). Powerful LED produces 800 Lumens of high definition light output and it can cast a beam beyond 375 yards. Sliding head allows users to adjust their beam pattern from a flood to a spot effortlessly and it features three output modes for high, low or strobe use. The body is built from machined 6000 series aluminum with a type II anodized finish and can handle anything it may encounter through years of professional use. On high mode; 800 Lumens for 5 hours of run time. Low mode; 325 Lumens for 7 hours of run time. Weighs 1.2 lbs. Dimensions: 9"L x 2.50"W x 2.50"H.
LIGHT FLOOD M12               LANTERN/FLDLGHT CDLSS LED 18V FLOODLIGHT CDLSS LED L-ION 18V
LIGHT FLOOD M12
Our Price: $79.60
Gives users the ultimate flood light for on the go use. Adapts, performs and survives any work environment users come across.  Compact size and integrated hanging features like its strong magnets, spring loaded clamp, key hole hanger and wire hanger. Capable of lighting up a large workspace for extended periods of time as it provides 1,000 lumens of high definition light output in it high mode, 400 lumens in medium and 200 lumens of output in low mode. It uses high quality LED with a neutral white color and a high color rendering index paired with a Milwaukee designed reflector to produce an even beam pattern. Impact and chemical resistant lens is able to withstand the toughest of jobsite conditions. LEDs never need to be replaced. Weighs 2.19 lbs. Dimensions: 7.5"L x 5.75"W x 5.5"H. Adjustable beam 180-360 degrees, 2.1 USB charger, impact resistant lens., four light settings, two stainless steel hooks. Uses M18 Redlithium battery. 11.5l., 1.2 LBS., 700 lumens. Designed to illuminate large work spaces on the jobsite, the cordless flood light uses 8 high-quality LEDs to provide 1,100 lumens and up to 1,300 lux. It's powered by the M18 Redlithium battery for up to 8 hours of run time on a single charge. With its roll cage design and impact-resistant, replaceable lens, it stands up to the toughest working conditions. This compact floodlight features an octagonal shape so the light may be used at multiple angles. The versatile hanger provides hands-free use in a variety of applications. Weighs 3.4 lbs. Dimensions: 8-3/4"L x 6-1/4" W x 6-1/4"H. Tool only, batteries not included.
Makita 9557PB Corded Angle Grinder GRINDER ANGLE 4-1/2IN W/CASE  SPOTLIGHT LED CORDLESS 20V MAX
All ball bearing design and metal gear housing, rotatable gear housing can be positioned every 90 degrees, lock-on/off feature, AC/DC switch for use with alternative power source, protective varnish seals the armature from dust and debris, extra large paddle switch, thicker coil wires are wound more closely to reduce heat and energy loss. Specs: 120V, grinding wheel, sanding disc - 4-1/2", wire cup brush 3-1/2", no load speed 10,000 RPM, 5/8"x11 UNC spindle thread, lock-on/lock-off, length 10-3/4", weight 4.5 lbs. Includes: 4-1/2" grinding wheel, wheel guard, lock nut, lock nut wrench, side handle, inner flange. Powerful 7.5 amp motor delivers 11,000 rpm for high output power. Small diameter barrel grip (only 2-1/2") for added comfort. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Extra large paddle switch for comfortable operation. Thicker coil wires are wound more closely to reduce heat and energy loss. All-ball bearing design and metal gear housing for durability. Rotatable gear housing can be positioned every 90?. Includes: (1) 4-1/2" Diamond Blade, Turbo, General Purpose (A-94552), (5) 4-1/2" Grinding Wheels (A-95956), (1) 4-1/2" Wheel Guard (125273-5), (1) 4-1/2" Cut-Off Wheel Guard (135103-2), (1) Lock Nut (193465-4), (1) Lock Nut (193465-4), (1) Lock Nut Wrench (782422-3), (1) Side Handle (153489-2), (1) Inner Flange (224399-1) and (1) Case. 3 bright LEDs illuminates dark jobsite work areas. 1000 and 90 Lumens. 1 bright red LED to preserve night vision. 2 brightness settings provides flexibility for maximum light output or extended runtime. 90 degree pivoting head provides versatility for lighting work surfaces. Can be seen up to 508 yards or 1,525 feet. Pivoting head allows for hands free operation and light to be projected in multiple directions while standing on its base. Belt hook to provide increased versatility for transportation and a hands free use in multiple placements. Integral hook for hands free use in multiple placements. Over-molded lens cover provides increased durability and  a non-marring surface for the jobsite. Light, weighs only 1.42 lbs. Batteries and charger not included.
DeWalt DWE402 Small Angle Grinder Milwaukee 6140-30 Small Corded Angle Grinder Dewalt D28402K Small Corded Angle Grinder
11 amp AC/DC 11,000 rpm motor provides the ideal weight/size ratio available. Dust ejection system provides durability by ejecting damaging dust and debris particles that enter the tool. Oversized brushes provide long brush life. Large spiral bevel gear provides long transmission life. One-Touch guard allows for 360 degree rotation of the guard with a single action. Quick-change wheel release allows tool free wheel removal without the need for a wrench. Top mounted and protected spindle lock button maximizes depth of cut without compromising durability. Uniquely small gripping surface in this power class allows for ideal comfort. Newly designed side handle provides excellent ergonomics while oversized threading provides durability. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage. Paddle switch with safety lock-off prevents accidental start up. Matching wheel flanges allow the use of common accessories. Lightweight at only 4.6 lbs. Tool length: 12". Spindle thread: 5/8"-11. Angle grinder includes: 2-position side handle and 4-1/2" One-Touch (T27) guard. Motor overload protection, epoxy protection extends motor life by protecting the copper wire from abrasion, debris baffles protect internal components by deflecting damaging debris out of the airflow, multi port exhaust reduces motor burn up by efficiently venting hot air out of the grinder, extra large paddle switch, tool free, burst resistant guard. Specs: 120V (AC only), 4-1/2" wheel diameter, speed (RPM) 10,000, slide switch, 5/8"-11 spindle thread size, spindle lock, side handle, 8' cord, max watts out (Power): 825 MWO, double insulated, easy actuation spindle lock, 8' 2-wire cord, Length 11.8", weight 5.0 lbs. Includes: (1) slide handle, (1) type 27 guard, (1) spanner wrench, (1) Flange. Dust ejection system through the air intake vents, low profile, one-piece brush arm, QuickChange wheel release allows wheel removal without need for a wrench, keyless adjustable guard, vibration reducing side handle, auto off brushes shut the tool down when the brushes need replacing to avoid tool damage, oversized, protected spindle lock button, paddle switch with safety lock-off prevents accidental start up, matching wheel flanges. Specs: max watts out 1,200W, HP 1.6hp, no load speed 11,000 RPM, use wheels RPM above 11,000 RPM, spindle thread 5/8"-11, paddle switch w/lock-on, dust ejection system, tool-free flange system, length 11-1/4", weight 4.6 lbs. Includes: two position side handle, depressed center wheel, keyless adjustable guard, wrench, kit box.
FLOOD LGT CRDLS/CRDD 20LED 18V SEARCH LIGHT LED              LIGHT AREA 18VOLT/20VOLT MAX
SEARCH LIGHT LED
Our Price: $99.84
The 18V LXT Lithium-Ion Cordless/Corded LED Floodlight (DML805) offers the convenience of cordless or corded operation, and provides bright and even lighting for large work spaces without the high heat of halogens. At full brightness it provides 750 lumens of light, and 450 lumens on low mode. The fast-charging 18V LXT Lithium-Ion 4.0Ah battery (sold separately) delivers 10.5 hours of continuous illumination on a single charge. It also features Extreme Protection Technology (XPT) for improved dust and water resistance. It is fully compatible with Makita 18V Lithium-Ion batteries. Battery and charger sold separately. Spot farther, flood brighter. 198? of rotation. 4 output modes: spot/flood, spot, flood or strobe. High definition; 1,250 Lumens with 700 yards of beam distance. Dust and water resistant. Impact resistant. Low battery indicator (Battery Not Included) alerts users when the battery is nearing end of charge. Weighs 3.1 lbs. Dimensions: 12.9"L x 5.5"W x 4.7"H. LEDs illuminate without the high heat of Halogens. Multi-port battery interface is compatible with 18 volt and 20 volt max batteries. Adjustable light head allows the light to be directed where it is needed. Ideal for portability and use in small spaces. Tool weighs only 3.27 lbs. Batteries Not Included.
Hitachi G12SA3 Corded Angle Grinder Milwaukee 6146-30 Small Corded Angle Grinder Milwaukee M18 Cordless Grinder
Highest overload durability with an improved cooling mechanism, improved dust protection resists wear on the armature and field coils, on/off switch mounted on the top, one touch quick off mechanism, Easy to manipulate spindle lock located at the front of the grinder, side handle projects forward 70 degrees and can be attached to the right or left. Specs: 4-1/2" wheel diameter, 5/8" x 11 spindle, power source AC/DC, power input 910 W, max output 1,900 W, no load RPM 10,000, length 11-9/64", weight 4.2 lbs. Includes: spanner wrench, side handle, depressed center wheel. Trigger grip handle provides better control, debris baffles protect internal components by deflecting damaging debris out of the airflow at the intake vents, soft grip three position handle provides optimal control during various applications, external brush doors reduces service time by providing easy access to brushes, tool free, burst resistant guard quickly adjusts the guard without a tool. Specs: 120V (AC only), 4-1/2" wheel diameter, max. watts out (power) 1,250 MWO, load RPM 10,000, debris baffles, multi-port exhaust, tool free guard, gears spiral bevel, epoxy motor protection, multi-port exhaust system, burst resistant guard, 8', 2-wire cord, double insulated, 5/8"-11  spindle thread, weight  5.5 lbs. Includes: side handle, type 27 guard, spanner wrench, flanges. 4 -pole motor delivers maximum power when cutting or grinding. Overload protection prevents damage to the tool and battery in abusive situations. Debris baffles L-shape vents keep debris from entering the tool and damaging internal components to help increase tool life. Tool free, burst resistant guard allows for quick, easy guard adjustments. 3-position side handle provides optimal control and versatility. Includes: (1) M18 Cordless Lithium-Ion 4-1/2" cut off grinder and (1) side handle.
Milwaukee 6121-30 Small Corded Angle Grinder GRINDR CT-OF/ANG 18V 5X4-1/2IN Dewalt DCG412B Cordless Grinder
Trigger grip handle provides better control, debris baffles protect internal components by deflecting damaging debris out of the airflow at the intake vents, soft grip three position handle provides optimal control during various applications, external brush doors reduces service time by providing easy access to brushes, tool free, burst resistant guard quickly adjusts the guard without a tool. Specs: 120V (AC only), 4-1/2" wheel diameter, max. watts out (power) 1,250 MWO, load RPM 10,000, debris baffles, multi-port exhaust, tool free guard, gears spiral bevel, epoxy motor protection, multi-port exhaust system, burst resistant guard, 8', 2-wire cord, double insulated, 5/8"-11  spindle thread, weight  5.5 lbs. Includes: side handle, type 27 guard, spanner wrench, flanges. Powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications. Ideal for grinding, cutting and sanding a wide range of materials including tile, concrete, pipe, conduit, and more. Automatic speed change technology adjusts speed and torque during operation for optimum performance. Active feedback-sensing technology (AFT) turns the motor off if rotation of the wheel is suddenly forced to stop. Rubberized soft grip provides increased comfort on the job. Slide switch with lock-on for operator convenience. 3-stage LED gauge indicates battery charge level. Specs: no load speed 8,500, spindle thread 5/8 -11, weight 5.8 lbs, length 14-1/4". Includes: (1) Grinder Tool, (1) 5" x 1/4" x 7/8" INOX Grinding Wheel - 36 Grit, (1) 5" Ultra Thin Cut-Off Wheel, (1) Side Handle, (1) Lock Nut Wrench, (1) 5" Cut-Off Wheel Guard, and (1) 5" Tool-less Wheel Guard. Battery and charger not included. For cutting and grinding applications. Spec: quick-change wheel, tool free guard, 2-finger trigger switch with lock-off button, 2-position side handle, 6,500 rpm, spindle lock, 5/8" spindle thread, and weighs 5.1 lbs. Uses wheels above 10,000 rpm. Includes tool only with spanner wrench, type 1 (cutting) guard and 2-position side handle. Uses 20V MAX Lithium Ion. Battery not included.
GRINDER ANGLE W/PDL SWTCH 5IN LIGHT FLOOD LED HP M18        Map-Pro 332477 Gas Cylinder
LIGHT FLOOD LED HP M18
Our Price: $148.96
This Angle Grinder with Paddle Switch is a beefy angle grinder that provides a no-lock multi-grip paddle switch for user control and comfort. Delivers 13 amps and up to 11,500 rpm of professional power. Variable speed setting of 2,800 rpm, allowing the user to match speed to application. The paddle switch provides additional operator control. The tool is designed for long life, featuring directed air flow that diverts dust away from vital components. Equipped with a two position Vibration Control side handle, making it less strenuous to operate. Constant electronics for easy starts and dependable speed under load, and it has direct motor cooling for higher overload capabilities. Provides security, with integrated acceleration sensor to limit inadvertent recoil and restart protection to protect against unintended startup. Burst-protection quick tool-less adjustable guard and a large spindle lock for a more convenient disc change. The Service Minder brushes stop the grinder when preventative maintenance is required. Features a 20 percent brighter flood light. Three light output modes for optimal brightness and run time. High Mode: 3,000 lumens for up to 2 hours with M18 XC 5.0 pack. Medium Mode: 1,500 lumens for up to 4 hours with M18 XC 5.0 pack. Low Mode: 650 lumens for up to 9 hours with M18 XC 50. High definition output with true color, even beam and natural light. Dual power source: M18 or corded. Light head rotates 240 degrees with positive stops. (3) integrated keyholes for hanging horizontally or vertically. Durable roll cage protects light head. MAP-PRO cylinders have a CGA 600 valve with 1.000 - 20 UNEF - RH - EXT thread. Cylinders are designed to meet Title 49 CFR DOT Specification 39 primarily for containing liquefied gas.
Milwaukee 2429-20 Sub-Compact Cordless Band Saw With Light LIGHT COMPACT W/FLOOD MODE    Makita 9005B Corded Angle Grinder
LIGHT COMPACT W/FLOOD MODE
Our Price: $151.81
One-handed cuts. Compact size and lightweight. Powerful motor cuts 3/4" EMT in 3 seconds, up to 150 cuts per charge with the XC battery. 1-5/8" cut capacity for a wide range of applications. LED light highlights the cut line. Blade tension adjustment  for adjustable blade tracking. Performs clean cuts on the most common small diameter metal cutting applications. Dual-latching lower guard that covers the blade outside the active cutting area. 280 sfpm. 11" length. Blade length 27" x 1/2" x .020". Includes: (1) M12 Cordless Sub-Compact band saw and (1) 18 TPI Sub-Compact portable band saw blade (3 pack). The M18 Radius Compact Site Light with Flood Mode offers the user two lights in one for area lighting and tasking lighting. With 2,200 lumens of output in area mode for illuminating large work areas and 1000 lumens of flood lighting for task situations there is no application this light can?t handle. This light offers up to 18 hours of runtime with an M18 XC 5.0 battery and has the option to be plugged in using its AC inlet for extended runtime. Its compact size allows users to take this site light on and off the jobsite effortlessly and its 4-1/4" metal hanging hook allow users to hang this light from above for overhead lighting situations. Equipped with a high impact polycarbonate lens to withstand harsh jobsite abuse. Its high quality LEDs never need to be replaced. Lightweight, lock-on button for continuous use operation, side handle can be installed on either side of the tool, ball bearing construction for long tool life, spindle lock for easy wheel changes, AC/DC for use with alternative power source, standard 5/8?x 11 UNC spindle, double insulated. Specs: 115V, 5" grinding wheel, 3-1/2" wire cup brush, 5" sanding disc, no load speed 10,000 RPM , 5/8" x 11 UNC, spindle thread, lock-on, length 14", weight 6.6 lbs. Includes: (1) grinding wheel, wheel guard, side handle, inner flange, lock nut, lock nut wrench, spindle washer.
Makita SJS High Power Lock On Angle Grinder GRINDER ANGLE 7 IN 4 HP       Milwaukee 6088-30 Large Corded Angle Grinder with Lock On Switch
Super joint system helps prevent gear damage caused by accidental wheel binding. Variable speed control dial enables user to match the speed to the application. Powerful 12.0 amp motor for increased output power in a more compact tool. Soft start feature for smooth start-ups. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Electronic speed control maintains constant speed under load. Larger and improved carbon brush material for longer tool life. Tool-less wheel guard adjustment for easy clamping.3-1/2" wire cup brush, 4-1/2" sanding disc. No load speed 2,800-10,500 rpm. 5/8" x 11 UNC spindle thread. Dimensions: 11-3/4"L x 5-1/15"W x 4". Weighs only 5.3 lbs. High power 8,500 rpm motor with overload protection provides higher operating speeds under load. Epoxy coated field armature provides long service life against abrasion from airborne debris. Low profile gear case allows for work in tight areas. Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage. Side handle provides improved ergonomics for specific applications. Brush window allows for quick brush replacement. Specs: 3,000 Watts, 4 HP. Includes: 7" guard and 2 position side handle. Debris baffles protects internal components, external brush doors reduces service time by providing easy access to brushes, soft grip main handle, burst resistant guard, adjust the guard without a tool, 7" and 9" type 27 guard included for added productivity. Specs: 120V (AC/DC), wheel diameter  7?/9?, trigger w/ lock-on, max watts out (power)  3,130, no load RPM  6,000 , multi-port exhaust, tool free guard, 4.2 HP  max horse power, use wheels RPM above  6,600, gears  spiral bevel, epoxy motor protection, multi-port exhaust system, spindle thread  5/8"-11 , double insulated, 8' 2-wire cord, easy actuation spindle lock, length  21", weight 13.7 lbs. Includes: grinder, side handle, 7" & 9" type 27 guards, spanner wrench, flanges.
TRIPOD LIGHT (BARE) 20V       TOWER LIGHT DUAL POWER LED M18 GRINDER ANGLE 4-1/2IN 60V BARE
TRIPOD LIGHT (BARE) 20V
Our Price: $193.32
GRINDER 60V MAX BARE
Our Price: $207.04
Illuminates workspace in the toughest jobsite conditions. Build for incredible durability in use, storage, or transport. Cutting edge LED technology provides extended runtime and natural white light. Variable brightness settings up to 3,000 lumens let you customize illumination for your work area. Compact design with carry handle provides easy portability and it sets in seconds. Rotating, pivoting head directs light where you need it. 39" H, 9? length L, 39" height, 16 Lbs. weight. The brighter, tougher, taller stand light. The LED Tower Light is designed to give professionals an area lighting solution that adapts, performs and survives industrial use unlike any other portable work light. Can be set up in seconds with it max extension 7' high and it collapses down to 40" for easy transport and storage. The light head can be extended from 4-7' to light overhead work or minimize shadows when casting light downward. Capable of filling large areas with light, it provides 2,500 lumens of high definition light output in high mode, 1,100 in medium and 700 in low. Power by M18 RedLithium XC 5.0 battery pack or extension cord (not included). It uses high quality LEDs with a neutral white color and a high rendering index paired with a Milwaukee designed reflector to produce an even beam pattern. Its reinforced legs are impact resistant and its low center of gravity provides a stable base. The light head is protected by an impact resistant lens and bezel and it nests into a protective shroud for secure transport and storage. Its LEDs never need to be replaced. 4-1/2" - 6" (115mm-150mm) Grinder with KicBack brake is maximized for power and durability. It delivers 13 amps of power with the portability and convenience of cordless through Dewalt's revolutionary FlexVolt technology. The rake engages when the trigger is released, stopping speeds of 1.5 seconds with standard grinding wheel (4-1/2" x 1/4" Bonded abrasive wheel, non-hubbed). KicBack brake engages when a pinch, stall or even bind up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off. E-Clutch activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor. 9,000 rpm speed allows the use of up to 6" wheels for both cutting and grinding applications. Includes: Grinder, side handle, 4-1/2" (115mm) Type 27 wheel, 4-1/2" (115mm) Type 27 guard, 6" (150mm) Type 27 guard, wrench and flanges. Battery Not Included.
Milwaukee 2429-21XC M12 Series Cordless Band Saws Makita GD0800C Corded Die Grinder Milwaukee 2629-20 Cordless Band Saw With Light
Provides one-handed power and portability to electricians, maintenance professionals and other users cutting small diameter materials. Weighs 6.75 lbs. Meets OSHA guarding requirements. LED light highlights the cut line. Includes 30-Minute charger, M12 XC high capacity Redlithium battery, 18TPI sub-compact portable band saw blade and carrying case. Specs: 280 SFPM, 1-5/8" cut capacity, blade tension adjustment and 27" blade size. Variable electronic speed, slender double-neck die cast aluminum gear housing, Internal labyrinth construction, speed control dial, SJS (Super Joint System) absorbs shocks, wheel lock. Specs: collet 1/8" - 1/4". no load speed 7,000 - 28,000 RPM. 115V, overall length 14-5/8". Includes: 1/4" collet cone , side handle, wrench #13 , wrench #19. Compact light weight design for cutting overhead and in tight places. 3-1/4" cut capacity cuts most common materials for electrician, plumber and mechanical cutting applications. Single pass cut on 3" copper, 3" angle iron and 2-1/2" conduit. Tool free adjustable material shoe quickly adjusts the shoe and allows flush cuts when working with installed materials against walls and ceilings. LED work light illuminates the cut line in dark areas. Blade ejection system lets you quickly change the blade by moving the material guide into the up position and depressing the blade ejection button. Drop resistant pulley guard engineered geometries and high impact polymer. Cast aluminum gear case withstands jobsite abuse and maintains gear position. At only 10-1/4 bls and 18" in length, the M18 cordless Lithium-Ion band saw is ideal for cutting metal in place. 480 sfpm.
Milwaukee 6242-6 Compact Corded Band Saw GRINDER ANGLE 4.5IN 60V 1BATT TOOL CUT-OFF LI-ION 20V 5AH
Variable speed dial, used to cut metal in place, overhead or in tight places, on/off trigger, LED work light illuminates the cut line, blade ejection system, tool-free adjustable material guide that allows the user to make cuts flush to ceilings or walls, drop resistant pulley guard, cast aluminum gear case, cuts most common materials for Electrician, Plumber and Mechanical cutting applications. Specs: voltage 120V/AC, SFPM 200-360, 35-3/8" blade length, maximum capacity-3-1/4"x3-1/4", 8ft. 3-wire, grounded cord, weighs 9.5 lbs, 16" long, Includes: (1) blade and case. The 60 volt 4-1/2" - 6" (115mm-150mm) Grinder with Kickback Brake is maximized for power and durability. It delivers 13 amps of power with the portability and convenience of a cordless. The Kickback brake engages when a pinch, stall or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off. 9,000 rpm speed allows the use of up to 6" wheels. The E-Clutch activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor. Comes with (1) 60V Max Lithium Ion battery and (1) fast charger. 7,000 rpm motor provides high power for cutting and grinding applications. Quick-Change wheel release allows for tool free wheel change without the need for a wrench. Tool free guard allows for quick, easy guard adjustment/positioning. 2 finger trigger switch with lock-off button allows for convenient activation and easier gripping. 2 position side handle offers greater control, comfort and versatility. 5/8-11 spindle lock; 5/8-11 spindle thread. Includes grinder, (2) Premium Li-Ion batteries, a fast charger, spanner wrench, 5" type 27 (grinding) guard, 2-position side handle and a contractor bag.
Milwaukee 6238-21 Portable Corded Band Saw BANDSAW KIT 20VOLT MAX 5AH    GRINDER BRUSHLESS 20V 4.5IN
Self lubricating for maximum wear resistance, no oiling required. With all ball and bearing construction for durable operation, dynamically balanced and ball bearing mounted armature. High torque worm gear and chain drive mechanism. Center of gravity is directly over blade; reducing operator fatigue. Saw has open line of sight and a blade tightening lever for quick blade changes. Specs: 2 speeds; no load 250 and 350 surface feet per minute. 120 volts ac/dc. 6 amps at 350 sfm and 5 amp at 250 sfm., length 19-3/4", weighs 17-1/2". Workpiece capacity is 4-3/4" round stock, 4-3/4" x 4-3/4" rectangular stock. Includes: saw and steel carrying case. Rental. Centered handle position provides ideal balance and ergonomics, which allows for more accurate cuts and less user fatigue. LED work light with 20 second delay illuminates dark work surfaces for accurate cutting. Integrated hang hook allows user to hang the saw without damaging the front handle or base. Blade tracking adjustment increases blade life by providing better blade tracking. Tool-less blade changing lever loosens blade tension to allow for blade change. Dual bearing blade guide rollers provides increased durability in the blade support system. Ergonomic soft grip back handle provides comfort and flexibility. Weighs 9.4 lbs. Includes: Premium Li-Ion battery, 14/18 tpi blade, fast charger, blade tracking wrench and bag. Brushless motor requires no brush changes. Kickback brake engages when a pinch, stall or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off. Two stage trigger requires two actions to activate tool. Brake stops wheel in 2 seconds or less on average. Features E-Switch protection; when the on/off trigger switch has no volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart the tool. Also included with the Grinder: a side handle, hex key, inner and outer flange, 4.5" type 27 guard, charger, (2) 6.0 AH batteries and a handy kit bag.
GRINDER ANGLE 4.5IN 60V 2BATT Milwaukee 2680-22 Right Angle Cordless Grinder Kit LIGHT AREA BLUTOOTH AC/DC BARE
The 60 volt 4-1/2" - 6" (115mm-150mm) Grinder with Kickback Brake is maximized for power and durability. It delivers 13 amps of power with the portability and convenience of a cordless. The Kickback brake engages when a pinch, stall or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off. 9,000 rpm speed allows the use of up to 6" wheels. The E-Clutch activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor. The brake engages when the trigger is released, stopping speeds of 1/5 seconds with standard grinding wheel (4-1/2" x 1/4" Bonded abrasive wheel, non-hubbed. 1700 max watts out. Comes with (2) Flexvolt batteries, (1) fast charger and (1) kit bag. Delivers maximum power when cutting or grinding with a 4-pole motor, overload Protection, debris baffles, Burst Resistant Guard allows for quick, easy guard adjustments, paddle switch, 35 percent faster cutting speed, 50 percent more cuts on a single charge, three position side handle. Specs: 9,000  RPM, paddle switch, tool free guard, large button spindle lock, 3 position handle, type 1 guard, type 27 guard, Lithium-Ion battery, weight 5.9 lbs. Includes: (2) 18V XC high capacity Lithium-Ion batteries, (1) one hour charger, type 1 guard, type 27 guard, type 1 cut-0ff wheel, spanner wrench, side handle, contractor bag. Corded/cordless Bluetooth LED large area light with built-in battery charger. Helps to illuminate work areas with a maximum of 7,000 lumens. With AC/DC capability, the light runs off any Dewalt 20 volt max battery and can also charge Dewalt slide pack batteries with versatility. The light features instant on/off with no warm-up, dimming as low as 500 lumens, right/left head and is stackable with a wheel option for convenient storage. Users can connect multiple large area lights for added illumination or to power a corded tool. Works in conjunction with the expanded Dewalt Tool App allowing it to be controlled from a users Smartphone or tablet. In addition to the convenience of the Tool Connect app, the light can be programmed to turn on or off at scheduled times automatically. Weighs 27 lbs.
GRINDER KIT W/LG ANGLE 7IN-9IN
Providing high performance, advanced ergonomics & legendary durability, this grinder is designed to complete the toughest grinding, surface preparation, and cutting applications with any 7" - 9" accessory. The POWERSTATE brushless motor provides 6,600 RPM and higher speeds under load for corded grinding/cutting performance. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 Red Lithium high output HD12.0 battery delivers unmatched run-time in all applications. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work. Specs: 6600 RPM, 7"/9" wheel diameter, 5/8"-11" spindle. Includes: (1) 18 volt M18 FUEL 7"/9" Large Angle Grinder, (1) M18 Red Lithium high output battery pack, (1) M18 & M12 Rapid Charger, (1) 9" T27 guard, (1) anti-vibration side handle, (1) back flange, (1) dust vent clip, (1) FIXTEC nut and spanner wrench.
   
 
1