Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > TORCHES / SOLDERING > SOLDER GUNS & IRONS
Sort By:
1
Oatey 53026 Wire Solder Oatey 53185 Rosin Core Wire Solder Oatey 53023 Rosin Leaded Core Solder
Lead free alloy of 95 percent Tin and 5 percent Antimony. Most commonly used where frequent and extreme temperature changes and vibrations occur. Meets the requirements of the Safe Water Drinking Act; 450 degrees F ? 464 degrees F melting range. Alloy of 60 percent Tin and 40 percent Lead; no external flux is needed. 361 degrees F ? 375 degrees F melting range. Can be used for electrical applications including wiring and other fine electronic work. Contains lead. Not for use on drinking water lines. Alloy of 60 percent Tin and 40 percent Lead; no external flux is needed. 361 degrees F ? 375 degrees F melting range. Can be used for electrical applications including wiring and other fine electronic work. Contains lead. Not for use on drinking water lines.
Oatey 53012 Rosin Leaded Core Solder Safe-Flo 53061 Wire Solder Oatey 53010 Wire Solder
40 percent tin and 60 percent lead alloy with non-corrosive and non-conductive core flux for electrical and electronic soldering such as appliance repair, radio, TV, wiring motors and non-drinking water lines; melting range of 361 to 460 degrees F. Alloy of tin, silver, copper and bismuth; works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics with a melting range of 420 to 460 degrees F;  .084" diameter. Used for tin plate work, sheet metal seaming, and hot water heating lines. Meets requirements of Safe Drinking Water Act for use on copper potable water lines. 50 percent tin and 50 percent lead, used with an external flux. Good flow characteristics and low melting point. 361 to 421 degrees Fahrenheit melting range; 0.075" diameter. Used for soldering galvanized gutters, general repairs, radiators, sheet metal and non-drinking water lines. Contains lead, not to be used for plumbing applications.
Oatey 53174 Acid Core Wire Solder Oatey 53011 Leaded Acid Core Solder SLDR 40/60-1/4LB 1/8IN
Lead free alloy of 95 percent Tin and 5 percent Antimony. Acid flux is contained within the core. Used for for sheet metal, radiator, gutter repair work with a melting range of 450 degrees F-464 degrees F; .081" gauge 40 percent tin and 60 percent lead alloy with acid flux contained in wire core; no external flux necessary. For sheet metal work, auto radiator repair, steel gutters and more. Not for use in electrical applications. 361 to 460 degrees Fahrenheit melting range. 0.081" diameter. Contains lead, NOT for plumbing applications. 40 percent tin, 60 percent lead. For sweat fittings, sheet metal joints, gutter work and other big jobs. Works well on galvanized sheet, copper, steel, nickel plate, brass and tin plate. Tensile Strength: 4900 PSI. Melting Temp: 460? (238? C). NOT FOR ELECTRICAL CONNECTIONS.
Oatey 53019 Instant Wire Solder SOLDER 1/8IN SW40TIN/60L 1/4LB Oatey 53016 Rosin Core Solder
Easy to use; solder and flux all in one. Can be used on drinking water lines. Includes acid brush. 40 percent tin, 60 percent lead. Use with appropriate type flux such as Forney 38120, Ruby Fluid, Forney 38125, Paste Flux, or Forney 38127 & 38128, Hi-Temp Fluxes. Tensile Strength: 4900 PSI. Melting Temp: 460? (238? C). NOT SUITABLE FOR ALUMINUM. 40 percent tin and 60 percent lead alloy with non-corrosive and non-conductive core flux for electrical and electronic soldering such as appliance repair, radio, TV, wiring motors and non-drinking water lines; melting range of 361 to 460 degrees F.
SOLDER 3/32IN 40TIN/60L 1/4 LB SLDR 50/50 1/8IN 1/4LB        Oatey 53027 Wire Solder
40 percent tin, 60 percent lead. Ideal for electrical wiring connections because of its non-conductive residue. Will not cause corrosion or deterioration of electrical connections. Tensile Strength: 4900 PSI. Melting Temp: 460? (238? C). 50 percent tin and 50 percent lead. Use with appropriate type flux such as Forney 38120, Ruby Fluid, Forney 38125, Paste Flux, or Forney 38127 & 38128, Hi-Temp Fluxes. Tensile Strength: 5500 PSI. Melting Temp: 421? (216? C). NOT SUITABLE FOR ALUMINUM. Lead free alloy of 95 percent Tin and 5 percent Antimony. Most commonly used where frequent and extreme temperature changes and vibrations occur. Meets the requirements of the Safe Water Drinking Act; 450 degrees F ? 464 degrees F melting range.
SOLDERING IRON 30 WATT 110V   Copper Lock 10-801 No Heat Solder SOLDER 1/16IN 60TIN/40L 1/4LB
For fine wiring, hobbies, models, making jewelry, electronics, TVs, radios, stereos, games, toys, etc. 750 degrees F (398.9 degrees C) tip temperature. Fast, easy, permanent; apply inside the copper connector, fit in the copper pipe and within seconds a permanent leakproof seal will occur.  Pressure may be applied after two minutes; can withstand pressures up to 500 PSI; can withstand temperatures from -60 degrees F to +300  degrees F. Meets US Military specifications. Good with all refrigerants. 60 percent tin, 40 percent lead. Ideal for electrical wiring connections because of its non-conductive residue. Will not cause corrosion or deterioration of electrical connections. Tensile Strength: 6900 PSI. Melting Temp: 375? (190? C).
TORCH PROPANE BRASS PENCIL TIP Oatey 53015 Acid Core Wire Solder Safe-Flo 53062 Wire Solder
Delivers a fine, concentrated flame for pinpoint heating; adjustable flame knob allows for flame control and fuel economy. General uses: soldering pipe; soft solder; thawing pipes; removing paint, tile and putty; lighting pilots and grills. Use with propane fuel only. 40 percent tin-60 percent lead, .125" gauge; can not be used on drinking lines. Alloy of tin, silver, copper and bismuth. Works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics with a melting range of 420 to 460 degrees F;  0.117" diameter. Used for tin plate work, sheet metal seaming, and hot water heating lines. Meets requirements of Safe Drinking Water Act for use on copper potable water lines.
Oatey 53176 Acid Core Wire Solder SOLDER WIRE KITS WATER SOLUBLE Oatey 50193 Acid Core Wire Solder
Lead free alloy of 95 percent Tin and 5 percent Antimony. Acid flux is contained within the core. Used for for sheet metal, radiator, gutter repair work with a melting range of 450 degrees F-464 degrees F; .081" gauge General uses: solder pipes, brazing metal, plumbing and automotive repairs. Product details: wire melting temperature: 450 degree F; diameter: 0.062"; wire net weight: .75 oz. silver solder; .5 oz. water soluble paste flux - NSF certified to ANSI/NSF61. Kit contents: 3 oz. solid wire solder, 1 oz. water soluble paste flux, 2-1/4" acid brush, abrasive cloth. Alloy of 40 percent Tin and 60 percent Lead. For repairing galvanized gutters, filling metal seams and other general repairs with a melting range of 360 degrees F - 460 degrees F. Can not be used on drinking water lines; .081" gauge.
SOLDER 1/8IN 95TIN/5ANT 1/4 LB SOLDER COMM 1/8IN 1LB RSN CRE SOLDER 1/8IN AC30TIN/70L 1/2LB
Tin-antimony "lead-free" solder can be used for soldering potable water pipe joints. Good for plumbing, refrigeration systems and other non-electrical applications where strength is required. Ideal for electrical wiring connections because of its non-conductive residue. Will not cause corrosion or deterioration of electrical connections. Melting Temp: 575? (299? C). 30 percent tin, 70 percent lead. For sweat fittings, sheet metal joints, gutter work and other big jobs. Works well on galvanized sheet, copper, steel, nickel plate, brass and tin plate. Tensile Strength: 4500 PSI. Melting Temp: 491? (255? C). NOT FOR ELECTRICAL CONNECTIONS.
Oatey 53014 Leaded Wire Solder SOLDER COMM ACID CRE 1LB 1/8IN Weller Featherweight Corded Soldering Iron
50 percent tin and 50 percent lead; use of flux required; .125" gauge. General purpose solder for sheet metal work, auto radiator repair and steel gutters. Contains lead, NOT for plumbing applications. For sweat fittings, sheet metal joints, gutter work and other big jobs. Works well on galvanized sheet, copper, steel, nickel plate, brass and tin plate. Melting Temp: 575? (299? C). NOT FOR ELECTRICAL CONNECTIONS. For hobbies, kits and radios. Stainless steel barrel, heat and impact resistant pencil handle. Includes No.MT1, 1/8" diameter replaceable nickel-plated copper tip that develops 750 degrees Fahrenheit. 8-1/4"L, 120 Volts, 25 watts, 50/60 Hz. U.L. Listed.
TORCH BUTANE MICRO 3-IN-1     Oatey 50192 Solid Wire Solder Safe-Flo 50683 Wire Solder Kit
Refillable, self-lighting micro butane torch; flame adjustment; continuous flame lock; built-in stand and protective cap included; convertible triple function tip; solder tip; hot blow; precision flame; BUTANE FUEL ONLY. General uses: electronic repair, heating shrink tube, small jewelry repair, crafts and hobby, automatic repair, general lighting and cooking. Alloy of 50 percent tin and 50 percent lead, use with Oatey #5 paste or liquid flux. Used for sheet metal, galvanized gutters, general repairs and non drinking water lines. Not to be used for plumbing. .125" gauge. Contains lead, NOT for plumbing applications. Alloy of tin, silver, copper and bismuth. Meets requirements of Safe Drinking Water Act for use on copper potable water lines. Provides excellent flow and fill characteristics. 420 to 460 degrees Fahrenheit melting range. Includes 8 oz. solid wire solder 0.117" diameter, 1.7 ozs. No.95 lead free tinning flux, acid brush, sand cloth, and how-to instructions.
Weller SP15NUS Lightweight Corded Soldering Iron Kit Safe Flo H-20-5 50691 Lead Free Flux Solder Kit SOLDER 1/8IN SW 50/50 1/2LB
Pencil-thin for fine soldering and hobby work, small or intricate jobs such as electronics kits, model railways and jewelry making. Stainless steel barrel, heat and impact resistant handle. Includes No.MT70, 1/8" diameter, replaceable, nickel-plated copper, cone shaped tip that develops 750 degrees Fahrenheit. 7"L, 120 Volts, 12 watts, 50/60 Hz. U.L. Listed. IAPMO Listed solder and water soluble flux NSF-61. Flux meets ASTM B-813 standard and is City of L.A. approved. Lead free silver solder meets ASTM B-32 standard. Kit contains: 8 oz., .117" gauge silver lead free solder, 1.7 Oz. H-20-5 water soluble flux, an applicator brush and a sand cloth. 50 percent tin and 50 percent lead. Use with appropriate type flux such as Forney 38120, Ruby Fluid, Forney 38125, Paste Flux, or Forney 38127 & 38128, Hi-Temp Fluxes. Tensile Strength: 5500 PSI. Melting Temp: 421? (216? C). NOT SUITABLE FOR ALUMINUM.
SOLDER 1/8IN LF S-WIRE 1/4 LB Weller SP40NUS Lightweight Corded Soldering Iron Copper Lock 10-800 No Heat Solder
Highly recommended for potable water pipe joints, plumbing, refrigeration systems and non-electrical applications. Does not char. Flows evenly within the joint and has a low melting point. Hardens into a shiny fillet. Leaves no corrosive residue. Grade: 95/4.5/.5 Tin/Copper/Silver. Tensile Strength: 6400 PSI; Melting Temp: 430? (222? C). For hobby and electronic work. Stainless steel barrel, heat and impact resistant pencil handle. Includes No.MT10, 1/4" diameter, replaceable nickel-plated copper tip that develops 900 degrees Fahrenheit. 8-1/4"L, 120 Volts, 40 watts, 50/60 Hz. U.L. Listed. Fast, easy, permanent; apply inside the copper connector, fit in the copper pipe and within seconds a permanent leakproof seal will occur.  Pressure may be applied after two minutes; can withstand pressures up to 500 PSI; can withstand temperatures from -60 degrees F to +300  degrees F. Meets US Military specifications. Good with all refrigerants.
Weller BP650MP Cordless Soldering Iron Oatey 20019 Wire Solder Weller 7200PKS Corded Soldering Gun Kit With 2-Wire Corded
Powerful 6-watt/4.5-volt iron heats to working temperature in under 15 seconds. 120 solder joints per set of (3) alkaline batteries. Batteries, lead-free solder,and tip removal tool included. Replacement tips available. Storage cap with auto with power shut-off. Applications: Microelectronics, hobbies, small appliances, and more. Alloy of 50 percent tin and 50 percent lead, use with Oatey #5 paste or liquid flux. Used for sheet metal, galvanized gutters, general repairs and non drinking water lines. Not to be used for plumbing. .125" gauge. Contains lead, NOT for plumbing applications. Fingertip trigger, single output from instant-heat gun-ready to solder in 6 seconds. High efficiency, tin-plated, pure copper tip. Lightweight, compact, balanced pistol-grip design with 2-wire cord. Includes No.7200 soldering gun, coil of lead-free rosin core solder, 2 tin-plated copper No.7235 standard chisel tips, and instruction leaflet. 120 Volts, 75 watts, 50/60 Hz. U.L. Listed.
TORCH BRASS HD PENCIL FLAME   Safe-Flo 29024 Wire Solder Weller SP25NKUS General Duty Corded Soldering Iron Kit
An all brass heavy duty pencil flame torch that can be used with MAP/Pro propane fuel or "MAPP"; allows you to perform larger jobs and finish smaller jobs quicker. The torch can handle soldering up to 1" copper tubing. Alloy of Tin, Copper, Silver, and Bismuth that works much like 50/50 solder. Recommended for use on potable water systems for sweating copper joints. Also effective on stainless steel, brass alloys, chrome alloys, galvanized steel and cast iron piping.  Works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics. 420 to 460 degrees F melting range; 0.117" diameter. Meets ASTM standard B-32 and the requirements of Safe Drinking Water Act. Can Not Be Used On Aluminum. For hobbies, kits and radios. Stainless steel barrel with heat and impact resistant pencil handle. With on/off indicator light. Contains No.SP23 soldering iron, three 1/8" diameter nickel-plated copper iron tips, lead-free solder, and soldering aid tool. Tips develop 750 degrees Fahrenheit and include No.MT1 cone-shaped, No.MT2 screwdriver, and No.MT3 chisel tips. Helpful hints and instructions on card. 8-1/4"L, 120 Volts, 25 watts, 50/60 Hz. U.L. Listed.
SOLDER 1/8IN 95TIN/5ANT 1/2 LB Oatey 21018 Wire Solder KIT SOLDER SILVER SS TUBE
Tin-antimony "lead-free" solder can be used for soldering potable water pipe joints. Good for plumbing, refrigeration systems and other non-electrical applications where strength is required. Alloy of 40 percent Tin and 60 percent Lead; 361 degrees F-460 degrees F melting range. Commonly used for tin plating, seaming joints, copper DWV systems and sheet metal repair. Contains lead, NOT for plumbing applications. Premium high strength acid flux cored silver bearing solder for joining all metals except aluminum, magnesium and zinc die cast. 6% silver content. Stays birght and hard. Nontoxic. Joint strength up to 20,000 PSI tensile strength. Weight: 9 oz. Working temperature: 431? F (221.7? C). Application temperature: 400? F to 700? F (204? C to 371? C).
SOLDER 1/8IN LEADFREE SW 1/2LB Oatey 21305 Bar Solder SOLDER 1/8IN50/50 SOLIDWIRE1LB
Highly recommended for potable water pipe joints, plumbing, refrigeration systems and non-electrical applications. Does not char. Flows evenly within the joint and has a low melting point. Hardens into a shiny fillet. Leaves no corrosive residue. Grade: 95/4.5/.5 Tin/Copper/Silver. Tensile Strength: 6400 PSI; Melting Temp: 430? (222? C). Alloy of 50 percent Tin and 50 percent Lead; 361 degrees F ? 421 degrees F melting range. For use with copper drain piping, tin plating, seaming joints and sheet metal. Not for use on drinking water lines. For general purpose use with appropriate type flux such as Forney 38120, Ruby Fluid, Forney 38125, Paste Flux, or Forney 38127 & 38128, Hi-Temp Fluxes. NOT SUITABLE FOR ALUMINUM. 5500 PSI Melting Temp: 421degrees (216 degrees C).
SOLDER 1/8IN COM SOLIDWIRE 1LB Oatey 53171 Rosin Core Wire Solder Oatey 21212 Rosin Leaded Core Solder
For general purpose use with appropriate type flux such as Forney 38120, Ruby Fluid, Forney 38125, Paste Flux, or Forney 38127 & 38128, Hi-Temp Fluxes. NOT SUITABLE FOR ALUMINUM. Melting Temp: 575 degrees (299 degrees C). Lead free alloy of 95 percent Tin and 5 percent Antimony. 450 degree F ? 464 degree F melting range. Most commonly used where frequent and extreme temperature changes and vibrations occur. Contains lead, NOT for plumbing applications. 40 percent tin and 60 percent lead alloy with non-corrosive and non-conductive core flux for electrical and electronic soldering such as appliance repair, radio, TV, wiring motors and non-drinking water lines; melting range of 361 to 460 degrees F.
Oatey 21115 Leaded Acid Core Solder Oatey 20015 Leaded Core Solder GRINDER ANGLE 4.5 IN
40 percent tin-60 percent lead, .125" gauge; can not be used on drinking lines. Alloy of 50 percent tin and 50 percent lead. General purpose solder for sheet metal work, auto radiator repair and steel gutters. Not to be used on drinking water lines. .125" gauge. Contains lead, NOT for plumbing applications. Soft grip barrel handle. Lock-on switch. Die-cast aluminum gear housing. 2-position assist handle. Includes 4-1/2" grinding wheel, auxiliary handle and wrench.
Weller BP865MP Cordless Soldering Iron TORCH BUTANE MICRO KIT W/CASE Safe-Flo 29025 Wire Solder
Heats up to working temperature in under 15 seconds. White LED light illuminates working surface. Dual power (hi/lo) indicated by red and green LEDs. Co-molded grip for a comfortable feel. Protective safety cap turns off power when placed on tool. Over 150 intermittent solder joints with fresh batteries. Applications: Field service repair on small parts and components. Includes:  Iron, 1 tip, 4 AA batteries, lead free solder, and tip wrench. Refillable, self-lighting micro butane torch; flame adjustment; continuous flame lock; built-in stand and protective cap included; convertible triple function tip; solder tip; hot blow; precision flame; BUTANE FUEL ONLY. General uses: electronic repair, heating shrink tube, small jewelry repair, crafts and hobby, automatic repair, general lighting and cooking. Kit contents: solder tip, hot knife tip, hot blow tip, sponge, rosin core solder and plastic carry case. Alloy of Tin, Copper, Silver, and Bismuth that works much like 50/50 solder. Recommended for use on potable water systems for sweating copper joints. Also effective on stainless steel, brass alloys, chrome alloys, galvanized steel and cast iron piping.  Works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics. 420 to 460 degrees F melting range; 0.117" diameter. Meets ASTM standard B-32 and the requirements of Safe Drinking Water Act. Can Not Be Used On Aluminum.
Weller SP80NUS Corded Soldering Iron Skil 9295-01 Corded Angle Grinder TORCH BUTANE TABLE TOP 3-IN-1
For hobby work, stained glass and minor repairs. Stainless steel barrel with heat and impact resistant handle. Includes soldering iron rest and No.MT20, 3/8" diameter, replaceable nickel-plated copper tip that develops 900 degrees Fahrenheit. 9-3/4"L, 120 Volts, 80 watts, 50/60 Hz. U.L. Listed. Tool less guard adjustment, heavy duty metal gear housing for added durability, compact grip design for comfort and control. Specs: 120V, 4-1/2" cut-off disc, no load RPM: 11,000. Includes: (1) metal grinding wheel, side assist handle, spanner wrench. Butane powered torch with child-resistant automatic ignition system flame adjustment; 3-in-1 torch tip: precision flame tip, hot blow tip and solder tip; adjustable, wind-resistant flame; runs for approximately 90 minutes (minimum setting) on each fill; torch has standard universal butane refill port; compact size and ergonomic grip; comes with table top stand; continuous flame switch allows for hands-free operation; BUTANE FUEL ONLY.
Black & Decker 7750 Corded Angle Grinder TORCH SELF LIGHTING           TORCH SELF LIGHTING
Metal gear case for durability and longer life, convenient slide switch for easier use, two Position side handle provides added comfort and control, spindle lock for easy accessory changes, contoured body grip for added comfort and control. Specs: 10000 RPM, spindle size 5/8"-11. Includes: metal grinding wheel, spanner wrench. Allows for versatility and ease of operation; the brass regulator valve allows for consistent flame at any angle of operation; the adjustable flame knob allows for flame control and fuel economy; this torch can be used to perform larger jobs or accomplish smaller jobs quicker; the MT 551 can solder up to 1" of copper tubing; use with MAP/Pro propane fuel. Regulated self-lighting propane torch features a stainless steel burn tube for strength and an ergonomic handle providing comfort and durability. The regulated valve delivers the highest quality and consistent triple point flame while operating the torch at any angle. The fuel control knob provides control and economy. Auto igniter for instant flame. Use with propane fuel only.
Porter-Cable PC60TAG Corded Angle Grinder TORCH SELF LIGHTING HOSE 4FT  SOLDER 1/8IN LEAD FREE SW 1 LB
Cast metal gear case increases jobsite durability and tool longevity, Tool-free change guard provides fast and easy guard removal. Spindle lock feature allows for single wrench bit changes. 3-position side handle allows greater control in multiple positions. Specs: 11,000 rpm, 5/8" x 11" spindle and weighs 4.1 lbs. Includes slide switch with lock-on, side handle, grinding wheel, wrench and wheel guard. A self-lighted regulated torch that delivers a swirl flame with a 4' flexible extension hose and a belt clip to hold the fuel cylinder; can be used for MAP/Pro or propane fuels. Highly recommended for potable water pipe joints, plumbing, refrigeration systems and non-electrical applications. Does not char. Flows evenly within the joint and has a low melting point. Hardens into a shiny fillet. Leaves no corrosive residue. Grade: 95/4.5/.5 Tin/Copper/Silver. Tensile Strength: 6400 PSI; Melting Temp: 430? (222? C).
SOLDER 1/8IN 95TIN/5ANT 1 LB  Rockwell RC4700 Corded Angle Grinder Oatey 22018 Lead Free Plumbing Solder
Tin-antimony, lead free, can be used for soldering potable water pipe joints. Good for plumbing, refrigeration systems and other non-electrical applications where strength is required. Tensile Strength: 6000 PSI. Melting Temp: 464? (240? C). Slim body for a secure grip, metal gear case, tool less safety guard adjustments instantly, two position auxiliary handle, slide on/off switch, spindle lock for easy disc replacement, soft grip handle. Specs: 120V/60Hz,no load speed 11000 RPM, 4-1/2" disc, disc bore 7/8", spindle thread  5/8"-11, weight  4.2 lbs. Includes 10 ft. cord, (1) auxiliary handle, (1) spanner. Lead free alloy of 95 percent Tin and 5 percent Antimony. Most commonly used where frequent and extreme temperature changes and vibrations occur. Meets the requirements of the Safe Water Drinking Act; 450 degrees F ? 464 degrees F melting range.
Black & Decker G950 Small Corded Angle Grinder TORCH SWIVEL SELF LIGHTING    SOLDER GUN KIT 140/100W 120V
Powerful motor for fast, efficient grinding, metal gear case adds durability and extends the life of the tool, extended handle for added comfort and control, trigger switch allows for ease of use when wearing gloves, three position side handle adds comfort and control. Specs: 10000 RPM, spindle size 5/8"-11. Includes: (1) metal grinding wheel, spanner wrench, side handle. Self-lighting MAP/Pro or propane torch has a 360 degree swivel that allows for versatility and ease of operation; the brass regulator valve allows for consistent flame at any angle of operation; the adjustable flame knob allows for flame control and fuel economy; this torch can be used to perform larger jobs or accomplish smaller jobs quicker; the MT 555 can solder up to 2" of copper tubing. 3 built-in LED's illuminate your work; 2 trigger positions 140 W/100 W; ergonomic non-slip grip; 6 seconds heat up; up to 900 degree F.
TORCH ON-DEMAND TRIGGER PRO   TORCH BUTANE MULTI PURPOSE    TORCH SWIVEL ON-DEMAND TRIGGER
A high performance Silver Swirl MAP/Pro torch that delivers a swirl flame; has an On-Demand trigger giving you instant ignition and flame shut off; has a safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting; can solder up to 2" of copper tubing; use with MAP/Pro or propane fuel. Integrated ignition button for easy startup, no independent ignition tool required; variable temperature and flame control for verstile use in both torch and flame mode; 9-piece for wide array of verstile applications; detachable base for hands-free operation; premium quality for long life, durability; filling valve for quick recharge. A high performance torch that delivers a swirl flame; has an On-Demand trigger giving one instant ignition and flame shut off; has safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting; can solder up to 2" of copper tubing.
TORCH BRASS KIT TWO PIECE     TORCH ON-DEMAND TRIGGER PRO   GRINDER CDLSS CUTOFF 20V MAX
Delivers a fine, concentrated flame or pinpoint heating; adjustable flame knob allows for flame control and fuel economy. General uses: soldering pipe; soft solder; thawing pipes; removing paint, tile and putty; lighting pilots and grills. Kit includes: Brass pencil tip torch and propane cylinder. A high performance Silver Swirl MAP/Pro torch that delivers a swirl flame; has an On-Demand trigger giving you instant ignition and flame shut off; has a safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting; can solder up to 2" of copper tubing; use with MAP/Pro or propane fuel. High performance motor produces 8,500 rpm for aggressive cutting, removal and finishing. Cast metal gear housing helps dissipate heat during extended use. Contoured over molded handle optimized for increased comfort. Spindle lock allows for quick and easy wheel changes. 3 position side handle provides control in multiple positions. Tool free guard makes guard adjustments quick and easy.  20 volt max system - high performance cordless platform. 14" length; weighs only 5 lbs. Battery And Charger Sold Separately.
Bosch 1375A Small Mini Corded Grinder with Slide Switch Weller Professional D550 Corded Soldering Gun Weller D550PK Corded Soldering Gun With Twin Lights
Lock on/off switch for extended use applications, ServiceMinder brushes eliminates guesswork and stops the tool when preventative maintenance is required, epoxy coated field windings provides ultimate protection against abrasive dust and metal debris, 5/8"-11 spindle, spindle lock for quick wheel changes, two position auxiliary handle specifically designed and angled to a natural position, double insulated, UL listed, complies to OSHA. Specs: 120V/AC, 4-1/2" cut-off disc, max. motor HP 1, no load RPM 11,000, 5/8"-11  spindle thread, length 10-1/2", weight 3.75 lbs. Includes: guard, auxiliary handle, flange kit (inner and outer wheel flanges), spanner wrench, abrasive wheel. High output with 2-position trigger selection of dual heats. Heavy-gauge, high efficiency, tin-plated copper tip comes up to temperature in 6 seconds. Balanced pistol-grip design with twin lights to illuminate work and 2-wire cord. Includes soldering hints booklet. 120 Volts, 260/200 watts, 50/60 Hz. U.L. Listed. High output with 2-position trigger selection of dual heats. Heavy-gauge, high efficiency, tin-plated copper tip comes up to temperature in 6 seconds. Balanced pistol-grip design with twin lights to illuminate work. Includes No.D550 soldering gun, 1 soldering tip, 1 sealing tip, 1 cutting tip, flux brush, soldering aid tool, coil of lead-free rosin core solder, sturdy plastic carrying case and soldering hints booklet. 120 Volts, 260/200 watts, 50/60 Hz. U.L. Listed.
Makita GA4030K Corded Die Grinder Hitachi G12SR3 Corded Angle Grinder Milwaukee 6130-33 Small Corded Angle Grinder
Labyrinth construction seals and protects the motor and bearings from dust and debris, all ball bearing design and metal gear housing, externally accessible brushes, protective varnish seals the armature, machined bevel gears, side handle is positioned at an increased 20 degree angle for comfort and control. Specs: 120V, 4" grinding wheel, sanding disc, 3" wire cup brush, no load speed 11,000 RPM, spindle thread m10x1.25", length 10-1/2", weight 3.7 lbs. Includes: 4" grinding wheel, wheel guard, lock nut, lock nut wrench, side handle, inner flange, plastic tool case. Spindle lock provides easy and quick disc changes, tool rest to protect the user and prolong tool life, slide switch with a quick-off feature to shut off the tool immediately, removable side handle, carbon brush access allows user to replace brush as needed, lightweight design facilitates maneuverability. Specs: 1,010 max watts out, no-load speed 11,000 RPM, 4.5" wheel diameter, slide switch, spindle thread M10 x 1-1/4, spindle lock, sealed switch, length 10". Includes: wrench, side handle, 5 depressed center wheel, plastic carrying case. Compact and light grinder features debris baffle which protects internal components, multi-port exhaust reduces motor burn-up, tool free and burst resistant guard. Specs: wheel diameter  4-1/2", slide switch, max watts out (power)  750, speed rpm 11000, 120V (AC only), epoxy motor protection, double insulated 8'  cord, spindle thread  5/8-11", easy actuation spindle lock, length  10.25", weight  3.5 lb. Includes: grinder, 4-1/2" type 27 grinding wheel, type 27 guard, spanner wrench.
GRINDER SLIM 7.5A 1/2IN       SAW RECIP LITHIUM BARE 20V MAX Dewalt DWE4011 Small Corded Angle Grinder
GRINDER SLIM 7.5A 1/2IN
Our Price: $61.08
A light, ergonomic grinder with a slender grip circumference that allows users to work comfortable for extended periods. This 4.2 lb tool delivers plenty of power, with a 7.5 amp motor that produces 11,000 no-load rpm. It has directed air flow that diverts dust away from vital components. Bosch's Service Minder brush system shuts off the tool when preventative maintenance is required, which helps to eliminate guesswork. This grinder has a two position side handle. It has a burst protection quick adjustable guard designed for user protection, as well as a large spindle lock for easy disc changes. Includes (1) Auxiliary handle, (1) wheel guard, (1) flange kit, (1) spanner wrench and (1) 4-1/2" abrasive wheel. High performance drive train delivers 1" stroke length and 0-3,000 spm for aggressive cutting speed. 14.5" in length. Compact design allows the tool to reach tight spaces. Tool free blade release allows for quick and easy blade changes. Variable speed trigger provides more control for cutting a variety of materials. Pivoting shoe helps keep constant contact with material. Contoured over molded handle optimized for increased comfort. 20 volt max system - high performance cordless platform. Keyless blade clamp. Weighs only 4.4 lbs. Battery And Charger Sold Separately. For sharpening, grinding, rust removal and surface preparation. Metal gear case adds durability and extends the life of the tool. 7 amp motor for fast, efficient grinding. Trigger switch allows for ease of use when wearing gloves. Extended handle with rubber grips for added comfort and control. 3 position side handle adds comfort and control in a variety of applications. Spindle lock. Easy accessory changes. 1,000 rpm. Spindle size: 5/8''-11''.  Includes: 4-1/2'' small grinder, (1) metal grinding wheel, (1) spanner wrench and (1) side handle.
Makita GA4530X Corded Angle Grinder TORCH BRASS KIT PLUMBERS      Makita 9557NB Corded Angle Grinder
Rotatable gear housing can be positioned every 90 degrees for cutting applications, grinder has externally accessible brushes, protective varnish seals the motor from contaminants and reduces heat, all ball bearing design and metal gear housing , machined bevel gears. Specs: 11,000 no load RPM, 5/8" x 11 spindle thread (UNC), 10-1/2" x 5" x 4-1/16" overall length,  weight 3.1 lbs. Includes: 4-1/2" grinding wheel, sanding disc,  3-1/2" wire cup brush , wheel guard, lock nut, lock nut wrench, side handle, inner flange. Ideal for basic plumbing jobs; the kit contains the MT 200 torch head (sku # 786.1859), 14.1 oz. propane fuel, solder, flux, flux brush; kit also comes with a handy carry case that will easily holds your torch, fuel and accessories. All ball bearing design and metal gear housing, rotatable gear housing can be positioned every 90 degrees, lock-on/off feature, AC/DC switch for use with alternative power source, protective varnish seals the armature from dust and debris, extra large paddle switch, thicker coil wires are wound more closely to reduce heat and energy loss.  Specs: 120V, grinding wheel, sanding disc - 4-1/2", wire cup brush 3-1/2", no load speed 10,000 RPM, 5/8"x11 UNC spindle thread, length 10-5/8", weight 4.5 lbs. Includes: 4-1/2" grinding wheel, wheel guard, lock nut, lock nut wrench, side handle, inner flange.
TORCH KIT SELF LIGHTING       TORCH KIT SELF LIGHTING       Makita 9557PB Corded Angle Grinder
Regulated self-lighting propane torch features a stainless steel burn tube for strength and an ergonomic handle providing comfort and durability. The regulated valve delivers the highest quality and consistent triple point flame while operating the torch at any angle. The fuel control knob provides control and economy. Auto igniter for instant flame. Kit includes a 14.1 oz. disposable propane fuel cylinder. Creates a high intensity triple point flame. The fuel tube swivels 360 degrees; all brass valve with brass control knob; package includes the torch and a 14.1 oz. propane cylinder. All ball bearing design and metal gear housing, rotatable gear housing can be positioned every 90 degrees, lock-on/off feature, AC/DC switch for use with alternative power source, protective varnish seals the armature from dust and debris, extra large paddle switch, thicker coil wires are wound more closely to reduce heat and energy loss. Specs: 120V, grinding wheel, sanding disc - 4-1/2", wire cup brush 3-1/2", no load speed 10,000 RPM, 5/8"x11 UNC spindle thread, lock-on/lock-off, length 10-3/4", weight 4.5 lbs. Includes: 4-1/2" grinding wheel, wheel guard, lock nut, lock nut wrench, side handle, inner flange.
GRINDER ANGLE 4-1/2IN W/CASE  TORCH KIT W/SWIVEL TRIGGER    Milwaukee 2420-20 Hackzall Reciprocating Saws
Powerful 7.5 amp motor delivers 11,000 rpm for high output power. Small diameter barrel grip (only 2-1/2") for added comfort. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Extra large paddle switch for comfortable operation. Thicker coil wires are wound more closely to reduce heat and energy loss. All-ball bearing design and metal gear housing for durability. Rotatable gear housing can be positioned every 90?. Includes: (1) 4-1/2" Diamond Blade, Turbo, General Purpose (A-94552), (5) 4-1/2" Grinding Wheels (A-95956), (1) 4-1/2" Wheel Guard (125273-5), (1) 4-1/2" Cut-Off Wheel Guard (135103-2), (1) Lock Nut (193465-4), (1) Lock Nut (193465-4), (1) Lock Nut Wrench (782422-3), (1) Side Handle (153489-2), (1) Inner Flange (224399-1) and (1) Case. A high performance torch that delivers a swirl flame; has an On-Demand trigger giving one instant ignition and flame shut off; has safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting; can solder up to 2" of copper tubing. Includes 14.1 oz. disposable MAP/Pro cylinder. Keyless Quik-Lok blade clamp allows for quick and easy blade changes. All metal gear case for added durability. Variable speed trigger for increased user control. Battery fuel gauge displays remaining run time. Accepts both HackZall and Sawzall style blades. Built-in LED light illuminates work surface. At only 11" and 2.6 lbs, this lightweight design offer ideal versatility in tight spaces. Powerful motor delivers 0-3,000 strokes per minute and 1/2" stroke length allows for faster cuts through a wide range of material such as drywall, wood and PVC.
Dewalt DWE6401DS Corded Sander with Dust Shroud TORCH KIT DELUXE W/CASE BRASS DeWalt DWE402 Small Angle Grinder
Adjustable dust shroud can be connected to vacuum to provide improved working environment. Mid-handle design with soft grip and side handle provides increased balance and relieves user fatigue. Accepts 5", 8-hole hook and loop paper. Specs: 0-3,700 opm, dust collection, hook & loop pad and weighs 4 lbs. Includes 5" 5 hole hook & loop pad, dust shroud and wrench for installation and replacing hook & loop pad. Delivers a fine concentrated flame for pinpoint heating. Kit contains an alternate brush flame tip and orifice for broader less direct heat application. An all brass frame spreader can be used to create the widest style flame when needed. All components, including a spark lighter with extra flint renewals can be stored in the custom injected molded carry case. (1) 14.1 oz disposable propane fuel cylinder is included. 11 amp AC/DC 11,000 rpm motor provides the ideal weight/size ratio available. Dust ejection system provides durability by ejecting damaging dust and debris particles that enter the tool. Oversized brushes provide long brush life. Large spiral bevel gear provides long transmission life. One-Touch guard allows for 360 degree rotation of the guard with a single action. Quick-change wheel release allows tool free wheel removal without the need for a wrench. Top mounted and protected spindle lock button maximizes depth of cut without compromising durability. Uniquely small gripping surface in this power class allows for ideal comfort. Newly designed side handle provides excellent ergonomics while oversized threading provides durability. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage. Paddle switch with safety lock-off prevents accidental start up. Matching wheel flanges allow the use of common accessories. Lightweight at only 4.6 lbs. Tool length: 12". Spindle thread: 5/8"-11. Angle grinder includes: 2-position side handle and 4-1/2" One-Touch (T27) guard.
Milwaukee 6140-30 Small Corded Angle Grinder Dewalt D28402K Small Corded Angle Grinder Hitachi G12SA3 Corded Angle Grinder
Motor overload protection, epoxy protection extends motor life by protecting the copper wire from abrasion, debris baffles protect internal components by deflecting damaging debris out of the airflow, multi port exhaust reduces motor burn up by efficiently venting hot air out of the grinder, extra large paddle switch, tool free, burst resistant guard. Specs: 120V (AC only), 4-1/2" wheel diameter, speed (RPM) 10,000, slide switch, 5/8"-11 spindle thread size, spindle lock, side handle, 8' cord, max watts out (Power): 825 MWO, double insulated, easy actuation spindle lock, 8' 2-wire cord, Length 11.8", weight 5.0 lbs. Includes: (1) slide handle, (1) type 27 guard, (1) spanner wrench, (1) Flange. Dust ejection system through the air intake vents, low profile, one-piece brush arm, QuickChange wheel release allows wheel removal without need for a wrench, keyless adjustable guard, vibration reducing side handle, auto off brushes shut the tool down when the brushes need replacing to avoid tool damage, oversized, protected spindle lock button, paddle switch with safety lock-off prevents accidental start up, matching wheel flanges. Specs: max watts out 1,200W, HP 1.6hp, no load speed 11,000 RPM, use wheels RPM above 11,000 RPM, spindle thread 5/8"-11, paddle switch w/lock-on, dust ejection system, tool-free flange system, length 11-1/4", weight 4.6 lbs. Includes: two position side handle, depressed center wheel, keyless adjustable guard, wrench, kit box. Highest overload durability with an improved cooling mechanism, improved dust protection resists wear on the armature and field coils, on/off switch mounted on the top, one touch quick off mechanism, Easy to manipulate spindle lock located at the front of the grinder, side handle projects forward 70 degrees and can be attached to the right or left. Specs: 4-1/2" wheel diameter, 5/8" x 11 spindle, power source AC/DC, power input 910 W, max output 1,900 W, no load RPM 10,000, length 11-9/64", weight 4.2 lbs. Includes: spanner wrench, side handle, depressed center wheel.
Milwaukee 6146-30 Small Corded Angle Grinder Dewalt DC385B Straight Cordless Reciprocating Saw Makita GV5010 Vertical Corded Sander
Trigger grip handle provides better control, debris baffles protect internal components by deflecting damaging debris out of the airflow at the intake vents, soft grip three position handle provides optimal control during various applications, external brush doors reduces service time by providing easy access to brushes, tool free, burst resistant guard quickly adjusts the guard without a tool. Specs: 120V (AC only), 4-1/2" wheel diameter, max. watts out (power) 1,250 MWO, load RPM 10,000, debris baffles, multi-port exhaust, tool free guard, gears spiral bevel, epoxy motor protection, multi-port exhaust system, burst resistant guard, 8', 2-wire cord, double insulated, 5/8"-11  spindle thread, weight  5.5 lbs. Includes: side handle, type 27 guard, spanner wrench, flanges. Variable speed with trigger lock for increased blade control, 1-1/8" stroke length for faster cutting speed,  4-position blade clamp, lever-action keyless blade clamp, anti-slip comfort grip, pivoting adjustable shoe with open top and Specs: 0-3,000SPM, weighs 6.3 lbs. Includes: Tool only,  batteries and charger sold separately. Continuous rating input of 440W, ball and needle bearing construction for longer tool life, well defined exterior, and ergonomic soft grip. Specs: 120V, no load speed 4,500 RPM, double insulated, 5" sand disc, 7-1/8"L, weight 2.6 lbs. Includes: (1) abrasive disc, plastic pad, side handle, hex wrench.
Milwaukee M18 Cordless Grinder SAW RECIPROCATING CORDLESS 18V Dewalt DCS380B Orbital Cordless Reciprocating Saw
4 -pole motor delivers maximum power when cutting or grinding. Overload protection prevents damage to the tool and battery in abusive situations. Debris baffles L-shape vents keep debris from entering the tool and damaging internal components to help increase tool life. Tool free, burst resistant guard allows for quick, easy guard adjustments. 3-position side handle provides optimal control and versatility. Includes: (1) M18 Cordless Lithium-Ion 4-1/2" cut off grinder and (1) side handle. Delivers 0-2,800 strokes per minute and a 1-1/4" length stroke for faster cutting. Tool-less blade change allows for faster blade installation and removal for increased productivity. Rubberized soft grip handle provides increased comfort on the job. Large two-finger trigger for operator convenience. Electric brake for maximum productivity. Refined crank mechanism design minimizes blade deflection and reduces vibration. Tool only (battery and charger not included). Pivoting adjustable shoe extends blade life and allows depth of cut control. Rubber over molded comfort grip delivers optimal comfort and control. Double oil sealed shaft resists contamination and increases durability. 4-position blade clamp allows for flush cutting and increased positional versatility with tool free blade changes. Specs: 0-3,000 spm, electric brake and weighs 6 lbs. Tool only.
Hackzall M12 2420-21 Straight Cordless Reciprocating Saw Kit TORCH KIT W/CASE BRAZE/WELD   Milwaukee 6121-30 Small Corded Angle Grinder
Delivers fast cutting through a wide range of material such as drywall, wood, and PVC. Variable speed trigger allows for a controlled cut. Quik-Lok 1/2" universal tang blade clamp offers fast and easy blade changes. All-metal gear case. Battery fuel gauge displays remaining run-time. Accepts both Hackzall and Sawzall style blades. Built-in LED light illuminates work surface. 0-3000 SPM. Kit includes: (1) M12 Hackzall Recip Saw, (1) M12 Redlithium battery, (1) M12 Lithium-Ion battery charger, (1) Metal blade, (1) Wood blade and (1) Contractor bag. A brazing/cutting/welding torch kit which features a torch with 2 brass fuel valves: 1 for MAP/Pro and a regulated valve for oxygen; the torch is capable of delivering flame at over 5000 degrees F; braze up tp 1/2" steel; weld up to 3/16" steel; cuts 5/8" bolts and 3/16" steel; works only with MAP/Pro and Oxygen fuels; the torch kit includes the torch and 4-1/2' flexible hose, as well as a carry case with a built in stand both MAP/Pro and Oxygen cylinders, welding rods and a flint spark lighter. Trigger grip handle provides better control, debris baffles protect internal components by deflecting damaging debris out of the airflow at the intake vents, soft grip three position handle provides optimal control during various applications, external brush doors reduces service time by providing easy access to brushes, tool free, burst resistant guard quickly adjusts the guard without a tool. Specs: 120V (AC only), 4-1/2" wheel diameter, max. watts out (power) 1,250 MWO, load RPM 10,000, debris baffles, multi-port exhaust, tool free guard, gears spiral bevel, epoxy motor protection, multi-port exhaust system, burst resistant guard, 8', 2-wire cord, double insulated, 5/8"-11  spindle thread, weight  5.5 lbs. Includes: side handle, type 27 guard, spanner wrench, flanges.
GRINDR CT-OF/ANG 18V 5X4-1/2IN SAWZALL 2621-20 Cordless Cordless Reciprocating Saw Dewalt DCG412B Cordless Grinder
Powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications. Ideal for grinding, cutting and sanding a wide range of materials including tile, concrete, pipe, conduit, and more. Automatic speed change technology adjusts speed and torque during operation for optimum performance. Active feedback-sensing technology (AFT) turns the motor off if rotation of the wheel is suddenly forced to stop. Rubberized soft grip provides increased comfort on the job. Slide switch with lock-on for operator convenience. 3-stage LED gauge indicates battery charge level. Specs: no load speed 8,500, spindle thread 5/8 -11, weight 5.8 lbs, length 14-1/4". Includes: (1) Grinder Tool, (1) 5" x 1/4" x 7/8" INOX Grinding Wheel - 36 Grit, (1) 5" Ultra Thin Cut-Off Wheel, (1) Side Handle, (1) Lock Nut Wrench, (1) 5" Cut-Off Wheel Guard, and (1) 5" Tool-less Wheel Guard. Battery and charger not included. Gear-protecting clutch extends the life of the tool. Provides fast cuts with less vibration. Lever action Quik-Lok blade clamp provides quick and efficient blade changes while the variable speed trigger optimizes speed for different applications. Battery fuel gauge displays remaining run-time. Variable speed trigger. Weighing only 6.4 lbs, the saw is designed for maximum power, operator comfort and convenience.  17-3/4" length. Battery Not Included. For cutting and grinding applications. Spec: quick-change wheel, tool free guard, 2-finger trigger switch with lock-off button, 2-position side handle, 6,500 rpm, spindle lock, 5/8" spindle thread, and weighs 5.1 lbs. Uses wheels above 10,000 rpm. Includes tool only with spanner wrench, type 1 (cutting) guard and 2-position side handle. Uses 20V MAX Lithium Ion. Battery not included.
GRINDER ANGLE W/PDL SWTCH 5IN Dewalt DCS310S1 Orbital Cordless Reciprocating Saw Kit Makita 9005B Corded Angle Grinder
This Angle Grinder with Paddle Switch is a beefy angle grinder that provides a no-lock multi-grip paddle switch for user control and comfort. Delivers 13 amps and up to 11,500 rpm of professional power. Variable speed setting of 2,800 rpm, allowing the user to match speed to application. The paddle switch provides additional operator control. The tool is designed for long life, featuring directed air flow that diverts dust away from vital components. Equipped with a two position Vibration Control side handle, making it less strenuous to operate. Constant electronics for easy starts and dependable speed under load, and it has direct motor cooling for higher overload capabilities. Provides security, with integrated acceleration sensor to limit inadvertent recoil and restart protection to protect against unintended startup. Burst-protection quick tool-less adjustable guard and a large spindle lock for a more convenient disc change. The Service Minder brushes stop the grinder when preventative maintenance is required. Adjustable 3-position pivoting handle. Bright LED light illuminates dark work areas for better visibility. Blade reverses for access to tight spaces and flush cutting. Specs: Variable speed trigger, pivoting shoe, keyless blade clamp, 0-2,700 spm, electric brake and weighs 3.1 lbs. Includes 12V Max li-ion battery pack, 30 minute charger, 4" 6 tpi wood cutting blade, 4" 18 tpi metal cutting blade and kit bag. Lightweight, lock-on button for continuous use operation, side handle can be installed on either side of the tool, ball bearing construction for long tool life, spindle lock for easy wheel changes, AC/DC for use with alternative power source, standard 5/8?x 11 UNC spindle, double insulated. Specs: 115V, 5" grinding wheel, 3-1/2" wire cup brush, 5" sanding disc, no load speed 10,000 RPM , 5/8" x 11 UNC, spindle thread, lock-on, length 14", weight 6.6 lbs. Includes: (1) grinding wheel, wheel guard, side handle, inner flange, lock nut, lock nut wrench, spindle washer.
SAW RECIP SUB-COMPACT 18V     Hackzall M12 2420-22 Straight Cordless Reciprocating Saw Kit GRINDER ANGLE 7 IN 4 HP
SAW RECIP SUB-COMPACT 18V
Our Price: $157.53
Compact and light weight saw with variable speed trigger for a controlled cut while a Quik-Lok blade clamp offers fast and easy blade changes, powerful motor and a 1/2" stroke length allows for fast cutting through a wide range of material such as drywall, wood, and PVC, battery fuel gauge displays remaining run time, all metal gear case, built in LED light illuminates work surface. Specs: speed 0-3000SPM, 1/2" stroke length, blade clamp is Quik-Lok universal 1/2" tang, variable speed trigger, 11" long, weighs 2.6lbs. Includes: saw, (2) 12V Red Lithium batteries, (1) 30-minute charger, (2) hackzall blades, carrying case. High power 8,500 rpm motor with overload protection provides higher operating speeds under load. Epoxy coated field armature provides long service life against abrasion from airborne debris. Low profile gear case allows for work in tight areas. Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage. Side handle provides improved ergonomics for specific applications. Brush window allows for quick brush replacement. Specs: 3,000 Watts, 4 HP. Includes: 7" guard and 2 position side handle.
Milwaukee 6088-30 Large Corded Angle Grinder with Lock On Switch Makita SJS High Power Lock On Angle Grinder TORCH KIT 3-IN-1 PROFESSIONAL
Debris baffles protects internal components, external brush doors reduces service time by providing easy access to brushes, soft grip main handle, burst resistant guard, adjust the guard without a tool, 7" and 9" type 27 guard included for added productivity. Specs: 120V (AC/DC), wheel diameter  7?/9?, trigger w/ lock-on, max watts out (power)  3,130, no load RPM  6,000 , multi-port exhaust, tool free guard, 4.2 HP  max horse power, use wheels RPM above  6,600, gears  spiral bevel, epoxy motor protection, multi-port exhaust system, spindle thread  5/8"-11 , double insulated, 8' 2-wire cord, easy actuation spindle lock, length  21", weight 13.7 lbs. Includes: grinder, side handle, 7" & 9" type 27 guards, spanner wrench, flanges. Super joint system helps prevent gear damage caused by accidental wheel binding. Variable speed control dial enables user to match the speed to the application. Powerful 12.0 amp motor for increased output power in a more compact tool. Soft start feature for smooth start-ups. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Electronic speed control maintains constant speed under load. Larger and improved carbon brush material for longer tool life. Tool-less wheel guard adjustment for easy clamping.3-1/2" wire cup brush, 4-1/2" sanding disc. No load speed 2,800-10,500 rpm. 5/8" x 11 UNC spindle thread. Dimensions: 11-3/4"L x 5-1/15"W x 4". Weighs only 5.3 lbs. Contains a MAP/Pro torch head with 3 interchangeable tips (extreme swirl tip, standard swirl tip and pencil point tip); using spin lock technology the user can easily change fuel nozzle and tips ranging from a pencil point flame to the standard swirl flame up to the extreme silver swirl flame; with the interchangeable tips the user can have a pencil tip flame for precise, smaller jobs and tight working spaces; the standard swirl works great for most applications and the extreme silver swirl flame will allow the user to tackle larger jobs (soft solder up to 3" copper fittings) or accomplish smaller jobs more quickly; the custom blow-molded carrying case can carry the torch head, all of the accessory tips as well as up to two fuel cylinders. Kit contents: "Professional On-Demand MAP/Pro" torch with fuel flow adjustment (sku #s 786.1701, 786.1719); extreme swirl tip; standard swirl tip; pencil point tip; 14.1 oz. MAP/Pro cylinder and a custom blow molded case.
SAW RECIPROCATING 18V         SAW RECIP BRUSHLESS 60V MAX   GRINDER ANGLE 4-1/2IN 60V BARE
SAW RECIPROCATING 18V
Our Price: $202.46
GRINDER 60V MAX BARE
Our Price: $207.04
2-Speed brushless motor delivers 0-2,300 & 0-3,000 strokes per minute and a 1-1/4" stroke length for faster cutting. Tool-less blade change system allows for faster blade installation and removal for increased productivity. Rubberized soft grip handle provides increased comfort on the job. Large two-finger variable speed trigger for operator convenience. Electric brake for maximum productivity. Refined crank mechanism design minimizes blade deflection and reduces vibration. Tool only (battery and charger not included). Maximized for run-time and durability. It delivers the power of a corded reciprocating saw with the portability and convenience of a cordless saw through Dewalt's revolutionary FlexVolt technology. 0-3,000 spm and a 1-1/8" stroke length for fast and efficient cutting. LED light helps illuminate dark jobsite work areas. Rubber over-mold grip for comfort. Keyless lever-action blade clamp for quick and easy blade changes. Variable speed trigger allows user to instantly control speed. Pivoting shoe provides leverage for different applications. For metal and wood cutting. Tool Length: 17.725". Tool weighs only 7.8 lbs. This Is The Tool Only. Lithium Ion Battery And Fast Charger Not Included. 4-1/2" - 6" (115mm-150mm) Grinder with KicBack brake is maximized for power and durability. It delivers 13 amps of power with the portability and convenience of cordless through Dewalt's revolutionary FlexVolt technology. The rake engages when the trigger is released, stopping speeds of 1.5 seconds with standard grinding wheel (4-1/2" x 1/4" Bonded abrasive wheel, non-hubbed). KicBack brake engages when a pinch, stall or even bind up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off. E-Clutch activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor. 9,000 rpm speed allows the use of up to 6" wheels for both cutting and grinding applications. Includes: Grinder, side handle, 4-1/2" (115mm) Type 27 wheel, 4-1/2" (115mm) Type 27 guard, 6" (150mm) Type 27 guard, wrench and flanges. Battery Not Included.
Hackzall M18 2625-21CT Straight Cordless Reciprocating Saw Kit Makita GD0800C Corded Die Grinder SAW RECIPROCATING COMPACT 20V
Compact size allows for cutting in tight spaces,  light weight makes overhead work easier, Quik-lok blade clamp offers fast, easy tool free blade changes, built in LED light illuminates the work surface, compatible with M18 XC high capacity lithium-ion batteries and M18 compact lithium-ion batteries. Specs: speed  0-3000 SPM, stroke length 3/4", blade clamp, variable trigger, lithium-ion battery, tool length  13", tool weight  4.1 lb. Includes saw, (1) M18 Red Lithium compact battery, 1-hour charger, sawzall blade and contractor bag. Variable electronic speed, slender double-neck die cast aluminum gear housing, Internal labyrinth construction, speed control dial, SJS (Super Joint System) absorbs shocks, wheel lock. Specs: collet 1/8" - 1/4". no load speed 7,000 - 28,000 RPM. 115V, overall length 14-5/8". Includes: 1/4" collet cone , side handle, wrench #13 , wrench #19. Compact and lightweight design; 14.5" in total length fits between studs and allows users to make cuts in confined spaces. 4-Position blade clamp allows for tool free blade changes. 1-1/8" stroke length delivers fast cutting speed. Variable speed trigger with 0-2900 spm provides blade control for precision cuts. Bright LED light illuminates dark work areas for better visibility. Pivoting shoe provides versatility while cutting. Kit includes: (1) 20 volt Max Saw, (1) 5.0 Ah battery, (1) charger and (1) Kit bag.
SAW RECIPROCATING W/BATT KIT  SAW RECIP COMPACT BRUSHLSS 20V SAW RECIP 60V BRSHLS 1BATT KIT
POWERSTATE brushless motor has increased cutting speed and power through the toughest applications. 1-handed design provides superior control and versatility over standard reciprocating saws. 7/8" stroke length removes more material with each stroke resulting in faster cuts. Pivoting shoe provides constant contact with the work-piece resulting in smoother cuts with less bucking and vibration. Includes M18 Fuel Hackzall Saw, General-Purpose Sawzall Blade, M18 Red Lithium battery pack, and Contractor's bag. Compact (14.5" length) and lightweight (5 lbs) design for making cuts in confined spaces like in between studs. The brushless motor helps to provide more run time to get the job done. With a 1-1/8" stroke length and a variable speed trigger delivering up to 2,900 strokes per minute, this saw is fast and efficient. It also features a keyless, lever action 4-position blade clamp for quick and easy blade changes in four directions for a variety of applications including flush cutting. A bright LED light is included to illuminate dark work areas. For wood and metal cutting. Pivoting adjustable shoe. Kit includes: (1) 20 volt Max XR Brushless Compact Reciprocating Saw, (1) DCB205 XR Lithium-Ion battery 5.0Ah, (1) DCB115 Charger and (1) kit bag. This saw is maximized for run time and durability. It delivers the power of a corded reciprocating saw with the portability and convenience of a cordless saw through DeWalt's revolutionary FlexVolt technology. 0-3,000 spm and a 1-1/8" stroke length for fast and efficient cutting. LED light helps to illuminate dark jobsite work areas. Rubber over-mold grip for comfort. Keyless lever-action blade clamp for quick and easy blade changes. Variable speed trigger allows user to instantly control speed. Pivoting shoe provides leverage for different applications. The Kit includes: (1) 60V Max Brushless Reciprocating Saw (1) 60 V Max Lithium Ion battery and (1) fast charger, (1) blade and (1) Contractor bag.
GRINDER ANGLE 4.5IN 60V 1BATT TOOL CUT-OFF LI-ION 20V 5AH   SAWZALL Fuel Cordless Cordless Reciprocating Saw Kit
The 60 volt 4-1/2" - 6" (115mm-150mm) Grinder with Kickback Brake is maximized for power and durability. It delivers 13 amps of power with the portability and convenience of a cordless. The Kickback brake engages when a pinch, stall or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off. 9,000 rpm speed allows the use of up to 6" wheels. The E-Clutch activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor. Comes with (1) 60V Max Lithium Ion battery and (1) fast charger. 7,000 rpm motor provides high power for cutting and grinding applications. Quick-Change wheel release allows for tool free wheel change without the need for a wrench. Tool free guard allows for quick, easy guard adjustment/positioning. 2 finger trigger switch with lock-off button allows for convenient activation and easier gripping. 2 position side handle offers greater control, comfort and versatility. 5/8-11 spindle lock; 5/8-11 spindle thread. Includes grinder, (2) Premium Li-Ion batteries, a fast charger, spanner wrench, 5" type 27 (grinding) guard, 2-position side handle and a contractor bag. Powerstate brushless motor supplies constant power for faster cuts and reduced heat for extended life. Redlink Plus offers overload protection using total system communication between tool, battery and charger. Protects tool from overloading, overheating and over discharging. Redlithium XC 4.0 battery pack offers more work per charge and long life. Keyless adjustable stroke. Keyless Quik-Lok Universal blade clamp. 0-3,000 spm. 18-1/2" length and weighs only 8.9 lbs. Features an adjustable shoe, integrated LED light and a hang hook for convenient storage on the job. Kit includes: (1) M18 Fuel SawZall reciprocating saw, (1) M18 Redlithium XC 4.0 extended capacity battery pack, (1) M18 & M12 multi-voltage charger, (1) blade and (1) carrying case.
GRINDER BRUSHLESS 20V 4.5IN   SAW RECIP 60V BRSHLS 2BATT KIT GRINDER ANGLE 4.5IN 60V 2BATT
Brushless motor requires no brush changes. Kickback brake engages when a pinch, stall or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off. Two stage trigger requires two actions to activate tool. Brake stops wheel in 2 seconds or less on average. Features E-Switch protection; when the on/off trigger switch has no volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart the tool. Also included with the Grinder: a side handle, hex key, inner and outer flange, 4.5" type 27 guard, charger, (2) 6.0 AH batteries and a handy kit bag. The power of corded with the freedom of a cordless reciprocating saw. 0-3,000 spm and a 1-1/8" stroke length for fast and efficient cutting. LED light helps to illuminate dark jobsite work areas. Rubber over mold grip for comfort. Keyless lever action blade clamp for quick and easy blade changes. Variable speed trigger allows the user to instantly control speed. Pivoting shoe provides leverage for different applications. The kit includes: (1) 60 V Max brushless Reciprocating Saw, (2) 60 V Max batteries, (1) 20/60 V Max Fast charger, (1) blade and (1) contractor bag. The 60 volt 4-1/2" - 6" (115mm-150mm) Grinder with Kickback Brake is maximized for power and durability. It delivers 13 amps of power with the portability and convenience of a cordless. The Kickback brake engages when a pinch, stall or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off. 9,000 rpm speed allows the use of up to 6" wheels. The E-Clutch activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor. The brake engages when the trigger is released, stopping speeds of 1/5 seconds with standard grinding wheel (4-1/2" x 1/4" Bonded abrasive wheel, non-hubbed. 1700 max watts out. Comes with (2) Flexvolt batteries, (1) fast charger and (1) kit bag.
Milwaukee 2680-22 Right Angle Cordless Grinder Kit SAWZALL SUPER KIT             GRINDER KIT W/LG ANGLE 7IN-9IN
SAWZALL SUPER KIT
Our Price: $461.48
Delivers maximum power when cutting or grinding with a 4-pole motor, overload Protection, debris baffles, Burst Resistant Guard allows for quick, easy guard adjustments, paddle switch, 35 percent faster cutting speed, 50 percent more cuts on a single charge, three position side handle. Specs: 9,000  RPM, paddle switch, tool free guard, large button spindle lock, 3 position handle, type 1 guard, type 27 guard, Lithium-Ion battery, weight 5.9 lbs. Includes: (2) 18V XC high capacity Lithium-Ion batteries, (1) one hour charger, type 1 guard, type 27 guard, type 1 cut-0ff wheel, spanner wrench, side handle, contractor bag. Designed to perform in the toughest applications, the M18 FUEL SUPER SAWZALL combines Milwaukee's legendary performance and durability. The POWERSTATE brushless motor provides 3,000 SPM. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM high output HD12.0 battery delivers unmatched run-time in all applications. The 1-1/4" stroke length removes more material with each stroke and On/Off orbital action provides aggressive cuts in wood and smooth cuts in metal. Variable speed trigger and 5-speed dial provide maximum speed control for any application. The QUIK-LOK blade clamp allows for tool less blade changes and a rafter hook provides a convenient way to store the saw between cuts. Includes: (1) M18 FUEL SUPER SAWZALL Reciprocating Saw, (1) M18 Red Lithium high output battery pack, (1) M18 & M12 rapid charger, (1) blade and (1) bag. Providing high performance, advanced ergonomics & legendary durability, this grinder is designed to complete the toughest grinding, surface preparation, and cutting applications with any 7" - 9" accessory. The POWERSTATE brushless motor provides 6,600 RPM and higher speeds under load for corded grinding/cutting performance. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 Red Lithium high output HD12.0 battery delivers unmatched run-time in all applications. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work. Specs: 6600 RPM, 7"/9" wheel diameter, 5/8"-11" spindle. Includes: (1) 18 volt M18 FUEL 7"/9" Large Angle Grinder, (1) M18 Red Lithium high output battery pack, (1) M18 & M12 Rapid Charger, (1) 9" T27 guard, (1) anti-vibration side handle, (1) back flange, (1) dust vent clip, (1) FIXTEC nut and spanner wrench.
   
 
1