Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > TORCHES / SOLDERING > TORCH ACCESSORIES - SOLDER
Sort By:
1
FLINT RENEWALS                Ramset 1516A Drive Pin LIGHTER FLINT SPARK
Flint renewals for spark lighter (5) individual flints. Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter. Spark lighter with replaceable flints; used to ignite non-self-lighting torches.
Ramset 1506 Drive Pin Ramset 00810 Washered Pin Ramset 1508 Drive Pin
Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter. With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter. Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter.
SPREADER FLAME                Ramset 1512 Drive Pin Ramset 1514 Drive Pin
Flame spreader. Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter. Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter.
Ramset 06171/1503K Knurled Drive Pin Ramset 1516 Drive Pin Ramset 1524 Drive Pin
Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter. Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter. Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter.
Ramset 1516E Ramguard Pin 1-1/4IN WASHERED PIN          Ramset 1512SD Washered Pin
Coated to improve corrosion resistance in treated lumber and other applications. Fits most powder actuated tools that use 22cal. single shots, 27cal.; 0.145" shank diameter. With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter. With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter.
Ramset 1508SD Washered Pin 2IN WASHERED PIN              Ramset 1516SDC Washered Pin
With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter. With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter. With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter.
Ramset 1524SDP Washered Pin Ramset 1516SDE Ramguard Pin Ramset 1524SDE Ramguard Pin
With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter. Provides easier penetration into concrete, drywall, and structural steel. 7/8" washer prevents overdrive and increase holding value when fastening wood or thin metal to concrete or structural steel. Fits most powder actuated tools that use 22cal. single shots, 27cal; 0.145' shank diameter. Provides easier penetration into concrete, drywall, and structural steel. 7/8" washer prevents overdrive and increase holding value when fastening wood or thin metal to concrete or structural steel. Fits most powder actuated tools that use 22cal. single shots, 27cal; 0.145' shank diameter.
Black & Decker BDCMTJS Cordless Jig Saw Matrix Attachment Black & Decker BDEMS600 Corded Detail Sander TORCH BRASS KIT TWO PIECE
Tool free blade change for fast and easy change of blades. Variable speed allows for precision performance that's right for each job. Compact design maximizes user control for access in tight spaces. Includes 1 standard wood jig blade (T-shank). 0.5'' stroke length. Compact enough to fit into tight spaces. Features a 3 position grip for versatility while you work. A high performance dust collection system ensures your workspace stays clean. 16,000 opm (orbits per minute). Includes (1) sander, (1) finger attachments and (1) sanding pad. Delivers a fine, concentrated flame or pinpoint heating; adjustable flame knob allows for flame control and fuel economy. General uses: soldering pipe; soft solder; thawing pipes; removing paint, tile and putty; lighting pilots and grills. Kit includes: Brass pencil tip torch and propane cylinder.
Bernzomatic 333251 Oxygen Cylinder Bernzomatic 304182 Propane Cylinder Skil 7510-01 Corded Sander with Pressure Control
Oxygen cylinders have a CGA 601 valve with left-hand threads. Cylinders are designed to meet Title 49 CFR DOT specification 39 primarily for containing liquefied gas. Propane cylinders have a CGA 600 valve with 1.000 - 20 UNEF-RH - EXT thread. Cylinders are designed to meet Title 49 CFR DOT Specification 39 primarily for containing liquefied gas. Sands any type of wood surface, micro filter dust canister helps keep work area clean, auto track belt alignment keeps belt centered, soft grip, flush edge sanding, Lock-on on/off switch, attachment for shop vacuum controls dust as you sand. Specs: 120V, RPM (loaded) 1050, 6 ft. cord length, weight 8.2 lbs. Includes: (1) sanding belt, dust collection canister, vacuum adaptor.
BUTANE CYLINDER 5.6OZ         Dragster DS321 Corded Sander SAW JIG LITHIUM BARE 20V MAX
Universal fuel tip and additional tips in cap. Angled belt sands three times closer to the edge of the adjoining surfaces, retractable hood exposes top of sanding belt for use in a variety of applications, three position adjustable handle, dust collection with easy empty dust bag. Specs: ft/min 800 fpm. Includes: sander, medium grit sanding belt, dust bag, manual. Dust blower clears debris for better visibility. Tool-free blade release allows for quick and easy blade changes. 3 orbital settings easily adjusts cut aggressiveness across a wide range of applications. Variable speed trigger (0-2,500 spm) provides control for clean and accurate cuts. Beveling shoe provides the ability to cut 0 to 45 degree bevel cuts. Contoured over molded handle optimized for increased comfort. 20 volt max system high performance cordless platform. Includes Jigsaw and a 4" wood blade. Battery And Charger Sold Separately.
SmartSelect MS2000 Corded Sander Kit TORCH BRASS KIT PLUMBERS      Rockwell SS4300K Shop Series Belt Sanders
SmartSelect dial helps you select the right sanding base while automatically adjusting the speed, the 4-in-1 sander provides maximum versatility for a wide range of sanding applications, tool free base change allows you to quickly and easily change bases with the push of a button, easy empty filtered dust canister, hook & loop sandpaper system, dust-sealed on/off switch. Specs: orbits/min  8500/13,000 OPM. Includes: sander, (2) interchangeable sanding bases, (1) finger-detail attachment, assorted sheets of sandpaper, storage bag for accessories and bases. Ideal for basic plumbing jobs; the kit contains the MT 200 torch head (sku # 786.1859), 14.1 oz. propane fuel, solder, flux, flux brush; kit also comes with a handy carry case that will easily holds your torch, fuel and accessories. Variable speed for optimum finish. 3" x 21" - 3" x 5-1/2" platen; variable speed 790 - 1,300 sfpm. Rubber grips for comfort and control. 10' power cord. Includes dust bag and sturdy plastic carrying case.
TORCH KIT SELF LIGHTING       Ramset RS27 Powder Load Strip Ramset RS27 Powder Load Strip
Regulated self-lighting propane torch features a stainless steel burn tube for strength and an ergonomic handle providing comfort and durability. The regulated valve delivers the highest quality and consistent triple point flame while operating the torch at any angle. The fuel control knob provides control and economy. Auto igniter for instant flame. Kit includes a 14.1 oz. disposable propane fuel cylinder. Crimped brass cartridges in 10 shot strips, powder actuated Ramset/Red head tools. Interchangeable with all makes and models of single shot, low velocity tools. Color-coded for power lever 1 low-6 high; 2 brown, 3 green, 4 yellow and 5 red. Rental. Crimped brass cartridges in 10 shot strips, powder actuated Ramset/Red head tools. Interchangeable with all makes and models of single shot, low velocity tools. Color-coded for power lever 1 low-6 high; 2 brown, 3 green, 4 yellow and 5 red. Rental.
Ramset RS27 Powder Load Strip TORCH KIT SELF LIGHTING       Ramset CW Single Shot Powder Load
Crimped brass cartridges in 10 shot strips, powder actuated Ramset/Red head tools. Interchangeable with all makes and models of single shot, low velocity tools. Color-coded for power lever 1 low-6 high; 2 brown, 3 green, 4 yellow and 5 red. Rental. Creates a high intensity triple point flame. The fuel tube swivels 360 degrees; all brass valve with brass control knob; package includes the torch and a 14.1 oz. propane cylinder. Crimped brass cartridges for single shot, powder actuated Ramset/Red head tools. Interchangeable with all makes and models of single shot, low velocity tools. Color-coded for power level. Carded.
Ramset CW Single Shot Powder Load Ramset CW Single Shot Powder Load TORCH KIT DELUXE W/CASE BRASS
Crimped brass cartridges for single shot, powder actuated Ramset/Red head tools. Interchangeable with all makes and models of single shot, low velocity tools. Color-coded for power level. Carded. Crimped brass cartridges for single shot, powder actuated Ramset/Red head tools. Interchangeable with all makes and models of single shot, low velocity tools. Color-coded for power level. Carded. Delivers a fine concentrated flame for pinpoint heating. Kit contains an alternate brush flame tip and orifice for broader less direct heat application. An all brass frame spreader can be used to create the widest style flame when needed. All components, including a spark lighter with extra flint renewals can be stored in the custom injected molded carry case. (1) 14.1 oz disposable propane fuel cylinder is included.
JIGSAW RECPROCATING LI-ION 20Z TORCH KIT W/CASE BRAZE/WELD   Dewalt DC330B Cordless Jig Saw
Pivoting head design converts from a reciprocating saw to a jig saw in seconds. Orbital cutting technology provides a more efficient cut. Built-in blower removes dust and debris to increase cutting visibility. Compatible with standard reciprocating saw and t-shank jig saw blades. Compact and lightweight for easy use.  Includes: 20 volt Axis Reciprocating and Jigsaw, 20 volt Max Lithium battery, 20 volt charger, Wood Cutting Jig saw Blade, Metal-Cutting Jig saw blade, Aluminum-Cutting Jigsaw Blade, and Wood-Cutting Reciprocating Blade. A brazing/cutting/welding torch kit which features a torch with 2 brass fuel valves: 1 for MAP/Pro and a regulated valve for oxygen; the torch is capable of delivering flame at over 5000 degrees F; braze up tp 1/2" steel; weld up to 3/16" steel; cuts 5/8" bolts and 3/16" steel; works only with MAP/Pro and Oxygen fuels; the torch kit includes the torch and 4-1/2' flexible hose, as well as a carry case with a built in stand both MAP/Pro and Oxygen cylinders, welding rods and a flint spark lighter. Tool only, batteries and charger sold separately. Variable speed for versatility in a multitude of materials and applications, 4-position orbital action, keyless lever-action blade clamp, all-metal keyless shoe bevel with detents at 0, 15, 30 and 45  provides versatility for easy bevel cutting, adjustable dust blower, batteries provide long run-time and battery life, anti-slip comfort grip. Specs: 18V, strokes/min 0-3,000SPM, stroke length 1", keyless blade clamp, dust blower, weighs 7.5lbs
Map-Pro 332477 Gas Cylinder Dewalt DCS331B Cordless Jig Saw Porter-Cable 352VS Corded Sander
MAP-PRO cylinders have a CGA 600 valve with 1.000 - 20 UNEF - RH - EXT thread. Cylinders are designed to meet Title 49 CFR DOT Specification 39 primarily for containing liquefied gas. Specs: all-metal lever action keyless blade change, all-metal keyless shoe bevel with detents at 0-, 15-, 30- and 45-degree angles, 4-position orbital action, adjustable dust blower, anti-slip comfort grip, 0-3,000spm, 1" stroke length, and weighs 5.4 lbs. Accepts T-shank jig saw blades. Includes blades. Uses 20V MAX Lithium Ion. Battery not included. Variable speed dial, motor is located over platen for performance and balance, belt and gear drive system transfers power from the motor to the sanding belt, flush sanding up to vertical surfaces, dust bag swivels 360 degrees, fingertip belt tracking knob, quick release belt change lever. Specs: 120V/AC, 25-60 Hz, SFPM 850-1,300, 12.5"Lx5.75"Wx10.38"H, weight 10.75 lbs. Includes: (1) 100g ceramic aluminum oxide belt, dust bag assembly.
Quik-Lok 2445-21 Cordless Jig Saw TORCH KIT 3-IN-1 PROFESSIONAL Makita 9903 Corded Sander
For making quick cuts in wood, metal, wall tile, or plastics. Hybrid Grip design delivers greater control by bringing the grip closer to the materials with a variable speed trigger. Smooth cutting designed to minimize vibration by keeping the weight over the cutting area. LED light and fuel gauge illuminates the cut line and displays remaining run-time. Spec: 0-2,800 SPM, 3/4" stroke length, Quik-Lok T-shank blade clamp, 45 degree bevel capacity, tool-free lever bevel adjust, counterbalanced mechanism, and weighs 4.2 lbs. Includes M12 compact Red Lithium battery, 30-minute charger, milwaukee 10 TPI wood cutting t-shank jig saw blade, anti-splintering insert, non-marring shoe and contractor bag. Contains a MAP/Pro torch head with 3 interchangeable tips (extreme swirl tip, standard swirl tip and pencil point tip); using spin lock technology the user can easily change fuel nozzle and tips ranging from a pencil point flame to the standard swirl flame up to the extreme silver swirl flame; with the interchangeable tips the user can have a pencil tip flame for precise, smaller jobs and tight working spaces; the standard swirl works great for most applications and the extreme silver swirl flame will allow the user to tackle larger jobs (soft solder up to 3" copper fittings) or accomplish smaller jobs more quickly; the custom blow-molded carrying case can carry the torch head, all of the accessory tips as well as up to two fuel cylinders. Kit contents: "Professional On-Demand MAP/Pro" torch with fuel flow adjustment (sku #s 786.1701, 786.1719); extreme swirl tip; standard swirl tip; pencil point tip; 14.1 oz. MAP/Pro cylinder and a custom blow molded case. Variable speed control dial matches the speed to the application, auto tracking belt system, sands flush to wall with nose and side of sander, front grip, dust bag. Specs: 120V, only 85dB, ft./min. 690-1,440 , 11-5/8"L, 16.4 ft. power cord, double insulated, weight  9.5 lbs. Includes: (1) #80 abrasive belt, dust bag.
Makita BJV180Z Cordless Jig Saw
Built-in, shockproof, high output, LED light illuminates the line-of-cut. Tool-less push-in lock blade change system for more productivity. Low vibration and noise level for more control and comfort. 25-minute rapid optimum charger communicates with the battery and built-in CPU chip in the charger. Accepts T shank blades. Specs: 1" length of stroke, max cutting capacities: 5-5/16" wood, 3/8" steel, 3 orbital and 1 straight cut settings, 45-degree bevel capacity, 0-2,600 SPM and weighs 6.1 lbs. Uses 18V LXT lithium-ion battery (battery and charger not included). Includes blade set, cover plate and anti-splintering device.
   
 
1