Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > FASTENING > POWER HAMMER LOADS
Sort By:
1
Arrow RLA1/8 Long Pop Rivet Arrow RLS1/8 Long Pop Rivet Arrow RLA3/16 Long Pop Rivet
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Arrow RMA1/8 Medium Pop Rivet Arrow RMA3/16 Medium Pop Rivet Arrow RMA5/32 Medium Pop Rivet
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Arrow RMS1/8 Medium Pop Rivet Arrow RSA1/8 Short Pop Rivet Arrow RSA3/16 Short Pop Rivet
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Arrow RSA5/32 Short Pop Rivet Arrow RSS1/8 Short Pop Rivet Stanley SWKBN050S Nail
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Used for craft, hobby and finish carpentry projects. Sturdy plastic packaging reduces staple breakage. Fits TR200, TR250, TRE500, TRE550, TRE650 Electric Brad Nailers.
SureBonder FPC42AB Short Blind Rivet SureBonder FPC42S Short Blind Rivet SureBonder FPC48S Long Blind Rivet
SureBonder Blind Rivet, Short, SureBonder, 1/8 in Diameter, 0.063 - 1/8 in Grip, Aluminum Rivet, Aluminum Mandrel, Brown SureBonder Blind Rivet, Short, SureBonder, 1/8 in Diameter, 0.063 - 1/8 in Grip, Steel Rivet, Steel Mandrel SureBonder Blind Rivet, Long, SureBonder, 1/8 in Diameter, 0.376 - 1/2 in Grip, Steel Rivet, Steel Mandrel
SureBonder FPC4SWAS Short Blind Rivet Washer Arrow RSAW1/8 Short Pop Rivet Arrow WA1/8 Rivet Washer
SureBonder Blind Rivet Washer, Short, SureBonder, 1/8 in Nominal, Steel Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use washers when joining soft materials or when existing hole is oversize.
Arrow WS1/8 Rivet Washer Arrow WA316 Rivet Washer Stanley SWKBN625S Nail
Use washers when joining soft materials or when existing hole is oversize. Use washers when joining soft materials or when existing hole is oversize. Used for craft, hobby and finish carpentry projects. Sturdy plastic packaging reduces staple breakage. Fits TR200, TR250, TRE500, TRE550, TRE650 Electric Brad Nailers.
Stanley Tools TRA204T  Staples Stanley Tools TRA205T  Staples Stanley Tools TRA704T  Staples
Used for light duty household and crafting stapling jobs. Color coded packaging for easy product selection, sturdy plastic packaging reduces staple breakage. Fits TR45 and Arrow JT-21 staplers Used for light duty household and crafting stapling jobs. Color coded packaging for easy product selection, sturdy plastic packaging reduces staple breakage. Fits TR45 and Arrow JT-21 staplers For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700
Stanley TRA705T Narrow Crown Staple SureBonder FPC68A Long Blind Rivet SureBonder FPC62A Short Blind Rivet
For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700 SureBonder Blind Rivet, Long, SureBonder, 3/16 in Diameter, 0.376 - 1/2 in Grip, Aluminum Rivet, Aluminum Mandrel SureBonder Blind Rivet, Short, SureBonder, 3/16 in Diameter, 0.063 - 1/8 in Grip, Aluminum Rivet, Aluminum Mandrel
Stanley PBS4 Rivet Backup Plate Stanley TRA700 Narrow Crown Staple Stanley TRA700 Narrow Crown Staple
Used for joining soft materials, such as leather, or when the hole is oversized; adds strength to rivet hole. For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700 For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700
STAPLES HVDY 1250PC 1/4IN     Arrow RSAB1/8 Short Pop Rivet Stanley TRA200 Wide Light Duty Crown Staple
Works with the TRA700 series Stapler. They can be used for insulation, carpet underlayment and roofing felt. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Used for light duty household and crafting stapling jobs. Color coded packaging for easy product selection, sturdy plastic packaging reduces staple breakage. Fits TR45 and Arrow JT-21 staplers
Stanley Tools TRA709T  Staples STAPLES HVDY 1250PC 5/16IN    Arrow 225 Flat Crown Staple
For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700 Works with the TRA700 series Stapler. They can be used for insulation, carpet underlayment and roofing felt. Precision made. For use with model P22 plier-type stapler.
Arrow 224 Flat Crown Staple STAPLES HVDY 1250PC 3/8IN     STAPLES HVDY 1250PC 1/2IN
Precision made. For use with model P22 plier-type stapler. Works with the TRA700 series Stapler. They can be used for insulation, carpet underlayment and roofing felt. Works with the TRA700 series Stapler. They can be used for insulation, carpet underlayment and roofing felt.
Arrow RSST1/8 Short Pop Rivet STAPLE R19 5000PK 1/4IN       Arrow BN1820CS Brad Nail
STAPLE R19 5000PK 1/4IN
Our Price: $4.04
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. For use with Arrow model HT19 tacker. Ideal for a variety of indoor and outdoor projects including wood and artificial trim, picture frames and detail work; also good for upholstery, crafts, trellis and screen repair; for use in thin brad nail applications where wood thickness is less than 5/8"; helps to offer the gripping power required to hold materials together; brads are 18 gauge steel and brown head for color matching; for use in "Arrow" Powershot, Surebonder, "Stanley", "Sears Craftsman", "Black & Decker" and "Master Mechanic".
Arrow BN1810CS Brad Nail Stanley PAA44-1B Reusable Pop Rivet Stanley PAA48-1B Reusable Pop Rivet
Ideal for a variety of indoor and outdoor projects including wood and artificial trim, picture frames and detail work; also good for upholstery, crafts, trellis and screen repair; for use in thin brad nail applications where wood thickness is less than 5/8"; helps to offer the gripping power required to hold materials together; brads are 18 gauge steel and brown head for color matching; for use in "Arrow" Powershot, Surebonder, "Stanley", "Sears Craftsman", "Black & Decker" and "Master Mechanic". Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
Stanley PSS44-1B Reusable Pop Rivet Stanley PSS48-1B Reusable Pop Rivet Stanley PAA42-1B Reusable Pop Rivet
Used for joining steel to steel. Reusable, full-visibility packaging simplifies product selection and storage. High strength, all steel construction. Used for joining steel to steel. Reusable, full-visibility packaging simplifies product selection and storage. High strength, all steel construction. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
Stanley PSS42-1B Reusable Pop Rivet Arrow RSA1/8IP Small Pop Rivet Arrow RSS1/8IP Short Pop Rivet
Used for joining steel to steel. Reusable, full-visibility packaging simplifies product selection and storage. High strength, all steel construction. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Stanley PAA52-5B Reusable Pop Rivet Stanley PAA46-1B Reusable Pop Rivet Powercrown STCR50193/8-1M Crown Staple
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. 7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
Arrow RSA3/16IP Short Pop Rivet BRAD NAIL 1-1/2IN 18GA        Arrow RMA3/16IP Medium Pop Rivet
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Arrow Brad Nail, 18 ga, 1-1/2 in Length, Round Head, Chisel Point, Round Shank, Steel, Galvanized, For Use With: EBN320 Red Electric Brad Nail, Brown, For Indoor/Outdoor Use Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Arrow RSAW1/8IP Short Pop Rivet Arrow RLA3/16IP Long Pop Rivet Arrow RMA1/8IP Medium Pop Rivet
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Arrow RMS1/8IP Medium Pop Rivet Stanley PAA66-5B Reusable Pop Rivet Stanley PAA610-5B Reusable Pop Rivet
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
Arrow T50 Multi-Pack Staple Amerimax 84025 Gutter Rivet Powercrown STCR50191/2-1M Crown Staple
Arrow Multi-Pack Staple, Heavy Duty, Series: T50, 1/2 - 3/8 in Leg Length, Includes: (625) 1/4 in, (625) 3/8 in and (625) 1/2 in Leg Length Staples, 1875 Pieces Used to connect gutter parts together and fasten other light-gauge metals. Theses rivets feature durable aluminum construction. 7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
NAIL BRAD 18G PK1000 2IN BROWN Amerimax 84034 Gutter Rivet Arrow BN18 Nail
Arrow Brad Nail, 18 ga, 2 in Length, Round Head, Chisel Point, Round Shank, Steel, Galvanized, Brown, For Indoor/Outdoor Use Used to connect gutter parts together and fasten other light-gauge metals. Theses rivets feature durable aluminum construction. Made of 18 gauge steel, head hides brad in wood.
Stanley PAA58-5B Reusable Pop Rivet Stanley PAA42W-1B Reusable Pop Rivet Stanley PAA54-5B Reusable Pop Rivet
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
Arrow Fastener 65S  Staples Stanley-Bostitch STCR26191/4 Power Crown Staples Stanley PAA64-5B Reusable Pop Rivet
For use in model HT-65 staple hammer tacker extra heavy-duty. Fits Bostitch T5-6, H30-6 and P6C-6. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
Stanley PAA62-5B Reusable Pop Rivet Stanley PAA68-5B Reusable Pop Rivet Arrow RLA1/8IP Long Pop Rivet
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Arrow RLS1/8IP Long Pop Rivet Ramset CW Single Shot Powder Load RIVET ALUM ASSORTMENT 500PC
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Crimped brass cartridges for single shot, powder actuated Ramset/Red head tools. Interchangeable with all makes and models of single shot, low velocity tools. Color-coded for power level. Carded. Rustproof aluminum heads with steel shanks, Hardened, 100 lb (45 kg) ultimate shear strength, 150 lb (68 kg) ultimate tension strength, Neatly organized in a divided PVC storage case with chart inside box lid for easy selection.
Arrow BN18 Nail Stanley-Bostitch STCR26195/16 Power Crown Staples Arrow RK6120 Rivet Assortment Pack
Made of 18 gauge steel, head hides brad in wood. 7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000. Reusable, 6 storage compartments 25 each 1/8" x 1/8" aluminum and steel; 20 each 1/8" x 1/4" aluminum and steel; 15 each 1/8" x 1/2" aluminum and steel.
Stanley Tools TRA704-5C  Staples Arrow Fastener 305IP  Staples Arrow Fastener 306IP  Staples
For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700 For T32, T32MHT30 Staples & HT30 Hammer Guns. For T32, T32MHT30 Staples & HT30 Hammer Guns.
Arrow Fastener S107  Staples Stanley TRA700 Crown Staple T50 Pro-Pack 504IP Flat Crown Staple
For use in model 107 stapler. Painted blue. For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700 For use in Arrow No. ET50, ETC50, ETN50, ETF50, ETF50BN, T55C, T55, T50, T50PBN staple gun tackers and ETC50 cordless gun tacker.
T50 Pro-Pack 508IP Flat Crown Staple T50 Pro-Pack 506IP Flat Crown Staple Arrow Fastener 205  Staples
For use in Arrow No. ET50, ETC50, ETN50, ETF50, ETF50BN, T55C, T55, T50, T50PBN staple gun tackers and ETC50 cordless gun tacker. For use in Arrow No. ET50, ETC50, ETN50, ETF50, ETF50BN, T55C, T55, T50, T50PBN staple gun tackers and ETC50 cordless gun tacker. For upholstery, insulation, weather stripping and more. Fits T2025 staple gun tacker.
T50 Pro-Pack 505IP Flat Crown Staple Arrow Fastener 505SS1 T50 Staples T50 50424/504 Flat Crown Staple
For use in Arrow No. ET50, ETC50, ETN50, ETF50, ETF50BN, T55C, T55, T50, T50PBN staple gun tackers and ETC50 cordless gun tacker. For use with Arrow model No. HT-50A, T50, and T55  series staple guns.  Use in areas that need the protection of stainless steel to help fight corrosion. These are not made of 'Monel' which is for use in areas exposed to salt water. The T50 staples are made of .050 wire. They come 1,250 to a pack.
Arrow Fastener 206  Staples T50 50524/505 Flat Crown Staple T50 506SS1 Flat Crown Staple
For upholstery, insulation, weather stripping and more. Fits T2025 staple gun tacker. The T50 staples are made of .050 wire. They come 1,250 to a pack. Not for Marine Applications. Stainless steel to resist rust. Use With:  Arrow staple or staple/nail gun Nos.ET50, ETC50, ETF50BN, ETF50PBN, ETFX50 (307.9233), ETN50), T50 (647.9125), T50OC, T55 (647.8093), in hammer staple/tacker No.HT50 (688.1007), in brad nailer/staple gun No.T50PBN (696.5909), and in tacker gun No.T55C.
T50 508SS1 Flat Crown Staple Arrow Fastener 60430  Staples T50 50824/508 Flat Crown Staple
For use with Arrow model No. HT-50A, T50, and T55  series staple guns.  Use in areas that need the protection of stainless steel to help fight corrosion. These are not made of 'Monel' which is for use in areas exposed to salt water. For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020; Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM; Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481; Black & Decker 9701, 9700; Stanley Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300; Ace Hardware 27175, 22084 and 22087. The T50 staples are made of .050 wire. They come 1,250 to a pack.
T50 50CT24 Flat Crown Staple Arrow Fastener 60530  Staples T50 50924/509 Flat Crown Staple
Flat crown used for ceiling tile insulation. Pack size: 1,250. For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020; Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM; Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481; Black & Decker 9701, 9700; Stanley Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300; Ace Hardware 27175, 22084 and 22087. The T50 staples are made of .050 wire. They come 1,250 to a pack.
Arrow Fastener 208  Staples Arrow Fastener 256  Staples Arrow Fastener 257  Staples
For upholstery, insulation, weather stripping and more. Fits T2025 staple gun tacker. For use in No. T-25 low voltage wire staple gun tacker. For use in No. T-25 low voltage wire staple gun tacker.
Arrow 606 600 Flat Wide Crown Staple T50 50624/506 Flat Crown Staple Stanley-Bostitch STCR50191/2-4M Power Crown Staples
For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020; Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM; Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481; Black & Decker 9701, 9700; Stanley Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300; Ace Hardware 27175, 22084 and 22087. The T50 staples are made of .050 wire. They come 1,250 to a pack. 7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
Powercrown STCR50193/8-5M Crown Staple Arrow Fastener 60830  Staples Arrow RMA3/16BP Medium Pop Rivet
7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000. For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020; Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM; Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481; Black & Decker 9701, 9700; Stanley Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300; Ace Hardware 27175, 22084 and 22087. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
JT21 214 Flat Crown Staple JT21 215 Flat Light Duty Crown Staple Arrow Fastener 60930  Staples
Precision made. Use in No. JT21M, JT21CM, and J27 staple gun tackers. Precision made. Use in No. JT21M, JT21CM, and J27 staple gun tackers. For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020; Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM; Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481; Black & Decker 9701, 9700; Stanley Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300; Ace Hardware 27175, 22084 and 22087.
Powercrown STCR50191/4-6M Crown Staple JT21 276 Flat Crown Staple Arrow Fastener 259  Staples
7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000. Precision made. Use in No. JT21M, JT21CM, and J27 staple gun tackers. For use in No. T-25 low voltage wire staple gun tacker.
Stanley SHCR50193/8 Crown Staple Powercrown STCR50191/4-1M Crown Staple Black & Decker BDCMTI Matrix Cordless Impact Driver Attachment
For heavy duty stapling hammer model No.H2B. 7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000. Ideal for driving screws,large fasteners such as lag bolts, decking and drilling/driving in tight areas. Impact attachment fits 20 volt Black & Decker cordless drill (Orgill sku 983.7014).
Stanley-Bostitch STCR50199/16-1 Power Crown Staples Stinger 136420 Cap Staple DRIVER IMPACT 12V LITHIUM-ION
7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000. Plastic cap staples for roofing and sidewall applications. Offers better holding power. Caps are a recommended best practice to seal out moisture. Use with 702.5174, 611.829. 708 in-lbs of torque. Torque transfers to the work, not the user. 1/4" hex quick-change locking collet. More power and double the run time of Ni-Cad drivers. Battery holds its charge up to 18 months in storage. Built-in LED work light. Metal belt clip. Electric brake. 12 volt DC motor input. No load speed:0-2,300 rpm, reversible. Charger input: 120v - 60 Hz, with a charging time of 3-5 hrs. Includes (1) battery, charger and (1) #2 Phillips screwdriver bit.
Ramset RS27 Powder Load Strip Ramset RS27 Powder Load Strip Ramset RS27 Powder Load Strip
Crimped brass cartridges in 10 shot strips, powder actuated Ramset/Red head tools. Interchangeable with all makes and models of single shot, low velocity tools. Color-coded for power lever 1 low-6 high; 2 brown, 3 green, 4 yellow and 5 red. Rental. Crimped brass cartridges in 10 shot strips, powder actuated Ramset/Red head tools. Interchangeable with all makes and models of single shot, low velocity tools. Color-coded for power lever 1 low-6 high; 2 brown, 3 green, 4 yellow and 5 red. Rental. Crimped brass cartridges in 10 shot strips, powder actuated Ramset/Red head tools. Interchangeable with all makes and models of single shot, low velocity tools. Color-coded for power lever 1 low-6 high; 2 brown, 3 green, 4 yellow and 5 red. Rental.
DRIVER IMPACT LITHIUM-ION 20V Milwaukee 2426-20 Cordless Oscillating Multi-Tool Ramset CW Single Shot Powder Load
Compact, lightweight and powerful. Incredible 1062 in-lbs of torque. More power and double the run time of Ni-Cad. Battery holds its charge up to 18 months in storage. 1/4" hex Quick-Change locking collet. Built-in LED work light. On-board battery power indicator. No load speed: 0-2200 rpm, reversible. Impacts per minute: 0-3800. Charger input: 120 v/60 Hz. Weighs only 2.5 lbs. Electric brake. Includes battery, charger and #2 Phillips Impact Driver Bit. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians. The cordless multi-tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to work. Use it to make flush or plunge cuts, remove grout, sand and tackle other awkward jobs. Allows user to match the speed to the application. The all metal gear case provides added durability, while the over molded, ergonomic handle offers extra control. Powerful motor delivers 5,000 to 20,000 rpm. Variable speed dial with 12 settings allow users to match speed application. On-board fuel gauge displays remaining run time. Weighs only 1.63 lbs. Includes: (1) M12 Cordless Lithium-Ion multi-tool, (5) assorted sanding sheets, (1) sanding pad and (1) wood cutting blade. Crimped brass cartridges for single shot, powder actuated Ramset/Red head tools. Interchangeable with all makes and models of single shot, low velocity tools. Color-coded for power level. Carded.
Ramset CW Single Shot Powder Load Dewalt DC825B Cordless Impact Driver Hitachi WH10DFL2 Cordless Impact Driver Kit
Crimped brass cartridges for single shot, powder actuated Ramset/Red head tools. Interchangeable with all makes and models of single shot, low velocity tools. Color-coded for power level. Carded. Compact size and weight allows access into tighter areas and perform a wide range of fastening applications, frameless motor, replaceable brushes, textured anti-slip comfort grip, durable magnesium gear case and all metal transmission, heavy duty impacting mechanism. Specs: 18V, 1/4" hex shank quick release, 111 in/lbs torque, 1,330 in/lbs torque, 0-2,400RPM/0-2,700IPM, 5-3/4" long, weighs 2.2 (tool only)lbs. Includes: tool only (batteries and charger sold separately). Powered by Lithium-Ion battery for fade-free power. 955 in/lbs of driving torque for heavy applications like tightening carriage bolts, and sinking deck screws. Drills into wood, metal and concrete. Tightens and loosens small screws, tapping screws, bolts and nuts. Impressively lightweight at only 2.2 lbs and compact at less than 6" in length. Faster impact driving and no-load speed of up to 2,700 rpm and a 3,200 bpm impact rate. Optimized handle for a secure grip and ergonomic comfort in all hand sizes. Free-standing design allows drill to stand on its own when not in use. Balanced tool weight for proper wrist alignment and reduced fatigue. Charger circuitry prevents overheating and power loss. LED light effectively illuminates dark work areas. Quick change 1/4" hex chuck for simple bit replacements. Responsive variable speed trigger for precise control during operation. Kit includes: (2) 12 volt Peak Lithium-Ion batteries, (1) 12 volt Peak 25 minute quick charger, (1) No. 2 driver bit and (1) carrying case.
IMPACT DRIVER 20VLITH W/1-BATT MULTI-TOOL CORDLESS 18V       Dewalt DCF815S2 Cordless Impact Driver Kit
MULTI-TOOL CORDLESS 18V
Our Price: $119.34
Compact and lightweight, yet fast and powerful. LED work light is ideal for dark and enclosed areas. Temperature overload function which shuts unit down automatically if it overheats. Reverse function. No load speed 2500 rpm. 6mm keyless chuck. Worx 20 volt lithium batteries fit a wide range of Worx cordless lawn and workshop tools. Charge time 3-5 hours. Weighs only 2.64 lbs. Variable speed control dial (6,000-20,000 OPM) enables user to match the speed to the application. 3.2 degrees oscillation angle engineered for faster, more aggressive cutting and sanding. Large on/off slide switch with lock-on button for operator convenience. Small diameter barrel grip (only 2-3/8") for easy handling. Ideal for wood flooring, tile, plaster, sheetrock, wood, PVC and a variety of other applications. Includes: (1) plunge cut blade (A-95255), adapter (313248-8) and adapter (313249-6) (battery and charger not included). Compact and lightweight with a slim handle and contoured grip, three LED lights that provide visibility without shadows in work areas, a battery that has been placed at the bottom of the handle that allows the tool to stand up between uses. Specs: 950 inch/pounds of torque, 1/4-inch hex chuck that allows users to push the bit in with one hand to lock it in place and accepts 1-inch bit tips and weighs two pounds. Includes one impact driver, two 12 Volt Max Lithium Ion battery packs, one belt clip, one 40 minute, charger, one bit tip, one belt hook and a contractor bag.
Dewalt DCF885B Cordless Impact Driver DRIVER IMPACT CMPCT 1/4IN 20V Milwaukee M12 Cordless Impact Driver Kit
Compact design fits into tight areas. Three LED lights with 20 second delay after trigger release, provide visibility without shadows.  One-handed loading hex chuck accepts 1" bit tips. Specs: 0-2,800 rpm no load speed, 0-3,200 ipm, 1,400 in-lbs/117 ft-lbs max torque and weighs 2 lbs. Includes tool only with belt hook. Compact (6.9" length) and lightweight at only 3.3 lbs. Allows the tool to work in tight areas and minimizes user fatigue. Quick release 1/4" hex head chuck for easy 1-handed bit changes. High torque motor delivers 1,450 in-lbs of torque. High performance motor (0-2,800 rpm and 0-3,100 ipm) for quick fastening applications. Battery user gauge displays remaining charge. LED light brightens dark work areas. Includes Impact driver, (2) Li-Ion batteries, (1) charger and (1) storage bag. Milwaukee impact mechanism delivers 1,000 in-lbs of torque. 0-2,500 rpm for increased fastening speed. New ergonomic handle design for increased comfort. On-board battery fuel gauge displays remaining run time. 6-1/2" length. Weighs only 2.3 lbs. Kit contains: (1) M12 1/4" Hex Impact driver, (2) M12 RedLithium batteries, (1)M12 Lithium-Ion battery charger, (1) belt clip and (1) carrying case.
IMPACT DRIVER BRSHLS 1/4IN 20V Dewalt DCF886B Cordless Impact Driver Kit DRIVER IMPACT MODE 3-SPEED 18V
Brushless motor provides 50 percent more run time. Powerful motor provides 1,400 in-lbs of torque for large fastening applications. Transmission provides 2,700 max rpm's for speed of fastening applications. 1/4" Quick change hex for one handed quick and easy bit changes. Lithium Ion battery. Tool weighs 2.9 lbs. Tool length: 5.8". DeWalt brushless motor delivers more run time. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Tool Only, Battery Not Included. Quick-Shift Mode uses the brushless motor?s electronic controls to find the best balance of speed and torque for each application for more efficient fastening. Tightening Mode (T-mode) downshifts and reduces rotation and impact speed prior to driving the screw into place, and is engineered to minimize screw thread stripping, screw breakage and damage to work. Dual LED lights with an independent on/off switch illuminate the work area. Rubberized soft grip provides increased comfort on the job. 3-speed power selection switch (0-1,100/0-2,100/0-3,600 RPM, 0-1,100/0-2,600/0-3,800 IPM, and 1,550 in.lbs max torque provides precise fastening control for a wide range of applications. Tool only (battery and charger not included).
DRIVER HYDRAULIC 1/4IN HEX    Porter-Cable PCCK640LB Cordless Impact Driver Kit Hitachi WH18DGL Cordless Impact Driver Kit
DRIVER HYDRAULIC 1/4IN HEX
Our Price: $145.54
Brushless motor provides more power, more run-time, and longer life. Electronic Intelligence enables advanced communication between the batteries and tool, allowing for unmatched levels of performance, protection, and productivity. Features SURGE Hydraulic Driver technology and LED light. Weight: 2.3 lbs. Includes: M18 FUEL SURGE 1/4" Hex Hydraulic Driver, Belt Clip and Bit Holder. High torque motor delivers 1,495 in/lbs of torque. High performance transmission (0-2,900 rpm, 0-3,100 bpm) for quick fastening applications. Compact tool (6.2" in length, 3.2 lbs) easily fits in tight spaces and reduces fatigue. Easy load chuck allows user to insert bit with one hand. Battery fuel gauge displays charge remaining in the battery. LED work light provides additional light in dark work areas. 20V Max Lithium Ion batteries with 1.5 amp/hour cells delivers more power and run time in a smaller package. Kit contains: (1) Lithium Ion Impact driver, (2) Lithium Ion compact batteries, (1)Lithium Ion charger, kit box and No. 2 PH Screwdriving bit. Powerful 1,280 in/lbs of turning torque to handle tough jobs in tight spaces. Powered by Lithium-Ion battery for less weight and fade-free power. Up to 2,400 rpm and 3,200 bpm for maximum driving speed and fastening capabilities. Lightweight design at only 3.1 lbs reduce fatigue during extended or elevated use. LED light effectively illuminates dark work spaces. 1/4" quick-change chuck for quick and simple bit replacements. Responsive variable speed trigger provides complete control during operation. Kit includes: (2) 18 volt Lithium-Ion batteries, (1) 18 volt 35 minute charger, (1) 18 volt Impact driver and (1) carrying case.
M12 2426-21 Cordless Multi-Tool Kit Milwaukee M12 Cordless Impact Driver Kit DRIVER IMPACT 1/4IN
DRIVER IMPACT 1/4IN
Our Price: $170.56
Use to flush or plunge cuts, remove grout or grinding thinset, sanding or scraping. Use to tackle awkward application on jobsites. Runs 5,000 to 20,000 OPM. All metal gear case. Displays remaining run time. 12 setting variable speed. Universal adapter included allows tool to be compatible with most competitive accessories. Includes (1) 12V Red Lithium battery, M12 charger and carrying case. Hex impact driver kit delivers maximum performance in a compact size. Provides extended motor life, more runtime and proprietary drive control. Brushless motor with constant power output, yet runs cooler with no wearable components. Red Lithium 2.0 compact battery pack. M12 Fuel impact driver offers fastening speed. Compact weight and size allow access to tighter areas and reduce user fatigue. The built-in LED light illuminates work surfaces in dark work spots. Includes a 12 volt lithium-ion battery charger. Kit includes (1) M12 Fuel 1/4" hex impact driver (2453-20), (2) M12 Redlithium 2.0 compact battery pack (48-11-2420), (1) M12 Lithium-ion battery charger (48-59-2401), (1) belt clip and (1) carrying case. 20 percent faster in application speed vs. the competition. Tool outputs over 1,300 in. lbs. of torque that allows the user to get more work done by completing a wide range of fastening. Measuring only 5.1" in length allows for unmatched access in tight spaces. The POWERSTATE brushless motor delivers up to 0-3,300 RPM with constant power output to drive screws faster. REDLINK PLUS Intelligence prevents damage to the tool and battery caused by overloading or overheating. For use with M12 RedLithium compact batteries or extended capacity batteries. Specs:  4-mode drive control, 0-1,300 RPM in mode 1, 0-2,400 RPM in mode 2 and 0-3,300 RPM in mode 3. Mode 4 is self-tapping screw mode. Kit includes: (1) M12 FUEL 1/4" Hex Impact Driver, (2) 12 volts M12 RedLithium batteries, (1) M12 Lithium-Ion charger, (1) carrying case and (1) belt clip.
Milwaukee 2426-22 M12 Oscillating Tool Kits DRIVER IMPCT BRSHLS SB-CPT 18V DRIVER IMPACT COMPACT 18V
DRIVER IMPACT COMPACT 18V
Our Price: $179.48
Variable speed dial matches speed to application with extended run time and all metal gear case; on board fuel gauge displays remaining run time. Compatible with most competitive accessories and over 25 cordless tools in applications such as cutting, grinding, sanding, and scraping. Specs: variable speed  with 12 settings, 5,000/20,000 OPM, 30 min charge time, 10-7/8" long, weighs  2.1 lbs. Includes: Accessory Adapter, (2) M12 Red lithium batteries, wood cutting blade, sanding pad, (5) assorted sanding sheets, 30-minute charger and contractor bag. Sub-Compact Brushless Cordless Impact Driver is a fastening solution with superior comfort and handling and is part of a class of compact tools, with the size and weight of lower voltage tools but with the performance, power and compatibility of 18 volt. Efficient brushless motor with two speed settings and dual L.E.D. lights illuminate the work area. Innovative Assist Mode (A-mode) helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins, and is ideal for driving longer fasteners. Ergonomically designed handle with rubberized soft grip provides increased comfort. Specs: 1/4" Hex shank, 0-1,300/0-3,000 RPM, 0-1,600/0-3,900 IPM, 1,240 in. lbs. maximum torque. 5-5/16" length, and 2.6 lbs. weight. The Kit Includes: 18 volt 1/4" Brushless Impact Driver, 18 volt LXT battery, 18 volt charger, and 14" Contractor Tool bag. Makita 4-pole motor with 4 brush design delivers more rpm without decreasing torque. Variable speed (0-2,900 rpm and 0-3,500 ipm) and 1,460 in lbs. of torque for a wide range of fastening applications. All metal gear housing for increased job site durability. Compact and ergonomic design at only 5-3/8" long. Weighs only 2.8 lbs. with battery for reduced operator fatigue. Convenient one-touch 1/4" hex chuck for quick bit changes. Ergonomically designed handle with rubberized soft grip provides increased comfort. Dual L.E.D. lights with afterglow illuminate the work area. Makita's proprietary hammer and anvil impact mechanism is manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power. Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions. 18V compact Lithium-Ion 2.0 Ah battery 1820B, features and integrated L.E.D. battery charge level indicator, provides up to 50 percent more run time per charge, reaches full charge in 25 minutes or less and is compatible with 18V LXT tools. Equipped with Star Protection computer controls to protect against overloading, over-discharging and overheating. Rapid Optimum charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. The charger has a built-in fan to cool the battery for faster more efficient charging. Kit Includes: (2) 18 volt LXT Lithium-Ion compact 2.0 AH batteries, (1) 18 volt Lithium-Ion Rapid Optimum charger and (1) tool case.
Dewalt DCF885C2 Cordless Impact Driver Kit Dewalt DCF886D2 Brushless Cordless Impact Driver Kit DRIVER IMPACT CRDLS/BRSHLS 18V
Compact (5.5" front to back), light weight design fits into tight areas. Three LED lights with 20 second delay after trigger release, provide visibility without shadows. One-handed loading 1/4 hex chuck accepts 1" bit tips. Spec: 1/4in drive size, 2800rpm no load speed, 3200ipm, 1400in-lbs max torque, 117ft-lbs max torque. Includes (2) 20v Max lithium ion 1.5 Ah battery packs, 30 minute fast charger, belt hook and kit box. DeWalt brushless motor delivers more run time. XR Li-Ion batteries with fuel gauge provides more capacity. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back), lightweight (2.9 lbs) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Belt hook included for portability.
Bosch 25618-02 Cordless Impact Driver Kit DRIVER IMPCT KIT HEX 1/4IN 18V DeWalt DCS355D1 Cordless Oscillating Multi-Tool Kit
Variable speed trigger, 1/4" hex drive with Quick Release, high performance motor and all metal gears, hammer and anvil system, increased maneuverability in tight spaces and extended comfort, built-in LED light, spring loaded impact mechanism that reduces user fatigue, externally accessible brushes. Specs: 18V, 1/4" hex drive, impact rate is 0-3,200, no load speed is 0-2,800RPM/3200BPM, 1,500 in/lbs max torque, 5.7" long, weighs 3.3lbs. Includes: (2) 18V, Litheon slimpack batteries, (1) 60-minute Litheon battery charger, (1) double-ended Phillips bit , (1) belt clip, (1) carrying case. Brushless motor optimized for efficiency, longer run-time and longer tool life. Delivers 1,500 in-lbs of torque and 0-2,800 rpm for a wide range of fastening applications. Compact design provides ideal balance and control. Also ideal for overhead applications or work in tight spaces. RedLink intelligence provides advanced overload protection against abusive applications and monitors the temperature to prevent damage and ensure maximum tool and battery life. RedLithium battery pack delivers more work per charge and more work over battery pack life. Weighs only 3.1 lbs. On board fuel gauge on battery. 5-3/8" tool length. Kit includes (1) M18 1/4" Hex brushless impact driver, (2) M18 RedLithium 2.0 compact battery packs, (1) M18 and M12 Multi-voltage charger and (1) carrying case. Brushless motor for more run time than brushed. Quick change accessory system for quick changes without wrenches. Dual-grip variable speed trigger for ultimate speed control. Bright LED light illuminates dark work surfaces for accurate cutting. Oscillating tool guide system allows users to set the depth or height for a series of cuts. The 28 piece accessory kit includes popular cutting and sanding attachments and also has a universal accessory adaptor for use with most oscillating tool accessory brands. Includes: (1) DCS355 20V max XR oscillating tool, (1) DCB203 20V max XR compact Li-Ion battery (2.0Ah), (1) fast charger, (1) Dewalt oscillating tool guide system, (1) wood with nails blade, (1) sanding pad, (25) sheets of sanding paper, (1) universal accessory adaptor, (1) contractor bag and an accessory storage box.
Milwaukee M18 Cordless Impact Driver Kit IMPACT DRIVER 1/4IN 20V       Milwaukee 2653-22CT Cordless Impact Driver Kit
IMPACT DRIVER 1/4IN 20V
Our Price: $230.59
Milwaukee 4-pole frameless motor. Features a robust design for longer life, more power and more run time. Delivers maximum power and application speed for greater efficiency on the job. RedLink intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. Proprietary 2-mode drive control. Two speed/torque modes. 1/4" hex quick connect chuck. Red Lithium battery delivers more work per charge. Delivers up to 2,750 rpm, 3,450 ipm and 1,500 in-lbs of fastening torque for ideal performance. LED light to illuminate work surfaces and includes an all metal, reversible belt clip for temporary tool storage. 5-1/2" length and weighs only 3.1 lbs. Charge time 30 minutes. Kit includes (1) M18 2-speed 1/4" hex impact driver, (2) M18 Red Lithium compact batteries, (1) M18 & M12 Multi-voltage charger, (1) belt clip and carrying case. Pairing the tool with the Tool Connect app enables you to access the last seen location of the device and diagnostics. Brushless motor delivers up to 75 percent more runtime vs. 18V NiCad brushed motors. Includes a Dewalt Home mode and 3 programmable modes to customize speed and light brightness. Specs: 1/4" Quick Release Hex Shank, 3,250 RPM, 4 speed settings, 1,825 In.-Lbs. max torque, 5.3" length, 2.8 Lbs. weight. Includes: DCF888 Too Connect Impact Driver, (2) Brushless Lithium Ion batteries, charger, and kit box. Features a Powerstate Brushless motor. Redlink Plus allows operator to choose between 3 fastening modes: Mode #1 for precision work (0-850 RPM, 200 in-lbs of torque), Mode #2 helps prevent damage to fasteners and material (0-2,100 RPM, 700 in-lbs of torque) and Mode #3 delivers maximum performance for the toughness application (0-2,900 RPM, 1600 in-lbs of torque). Specs: 1600 in-lbs peak torque, 0-2,900 max rmp, 0-3,600 max ipm, M18 and M12 multi-voltage charger, fuel gauge on battery, LED light and weighs 3.0 lbs with battery. Includes two M18 Redlithium compact capacity battery packs, 30-minute multi-voltage charger, belt clip and carrying case.
DRIVER IMPACT HEX CP KIT 1/4IN Stinger 136360 Cap Staple Dewalt DCF886M2 Cordless Impact Driver Kit
The POWERSTATE brushless motor delivers up to 2,000 in-lbs of torque and up to 30 percent faster driving speed, increasing user?s productivity for the most demanding fasteners on the job. At only 4.59? in length, this is the most compact tool in its class, allowing users to have more access in tight spaces. The REDLINK PLUS intelligence ensures maximum performance and protects from overloads, heating and or over-discharge. The REDLITHIUM battery pack delivers more work per charge and more work over the life of the pack when compared to competitors. The 4-mode DRIVE CONTROL provides greater control over output speed and power, for greater versatility. The self-tapping screw mode provides faster installation time by reducing stripping of fasteners. Specs: 0-3,600 RPM, 0-4,300 IPM, 2,000 in-lbs max torque. Includes: (1) M18 FUEL 1/4" Hex Impact Driver, (2) 18 volts M18 RedLithium batteries, (1) M18 & M12 multi-voltage charger, (1) belt clip, (1) bit holder and (1) carrying case. Plastic cap staples for roofing and sidewall applications. Offers better holding power. Caps are a recommended best practice to seal out moisture. Use with 702.5174, 611.829. DeWalt brushless motor delivers more run time. XR Lithium-Ion batteries (2) with fuel gauge provides more capacity. 45 minute charge time. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back), lightweight (3.4 lbs) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Belt hook included for portability. Specs: 0-1,000/2,800/3,250 RPM, 3,600 IPM, 1,825 in-lbs. torque brushless motor. Includes (1) 1/4" Impact Driver, (2) 20V Max batteries, (1) charger, (1) belt hook, and (1) kit box.
DRIVER IMPACT SCKT RDY W/2BATT Dewalt DCF885M2 Cordless Impact Driver Kit Hitachi WH18DSDL Brushless Cordless Impact Driver Kit
The 18 V EC Brushless 1/4" and 1/2" socket ready impact driver delivers result, with the socket ready adapter that has a 1/4" hex and 1/2" square drive in one tool. Performance control system provides three speed and torque settings for maximum effectiveness. The tool is powered by a hassle free EC brushless motor. The hammer and anvil system that delivers maximum impact endurance, and the tool provides superior ergonomics, with the smallest grip diameter in the class. The impact driver kit includes (1) 18 volt EC brushless 1/4" and 1/2" Socket Ready Impact Driver, (2) 18 volt Lithium Ion long lasting 4.0Ah FatPack batteries, (1) 18 volt charger, (1) double ended bit, (1) belt clip and (1) soft bag. XR Li-Ion batteries with fuel gauge provides more capacity. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back), lightweight (3.4 lbs) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Belt hook included for portability. Lithium Ion slide-type battery technology for fade free power, less weight and longer battery life. Industrial grade 2-piece motor with up to 1,510 in-lbs of torque to handle the toughest jobs. 1/4 inch Hex quick-change chuck for quick and easy bit replacement. Two-step power switch to alternate between full power and power saving modes. Metal belt hook keeps the tool close at hand. Bright LED light for increases visibility in enclosed work spaces. Externally accessible carbon brush for quick and easy maintenance. Lightweight at only 3.7 lbs. Cross compatible with all other Hitachi slide type 18 volt battery systems. Includes: (2) Lithium Ion 3.0 Ah slide type batteries (330067), (1) rapid Lithium Ion slide battery charger (UC18YRSL) and (1) carrying case (323230).
Milwaukee 2653-22 Cordless Impact Driver Kit DRIVER IMPACT HEX XC KIT 1/4IN MULTI TOOL 18V XC M18 KIT
MULTI TOOL 18V XC M18 KIT
Our Price: $334.46
Features a Powerstate Brushless motor. Redlink Plus allows operator to choose between 3 fastening modes: Mode #1 for precision work (0-850 RPM, 200 in-lbs of torque), Mode #2 helps prevent damage to fasteners and material (0-2,100 RPM, 700 in-lbs of torque) and Mode #3 delivers maximum performance for the toughest application (0-2,900 RPM, 1600 in-lbs of torque). Specs: 1600 in-lbs peak torque, 0-2,900 max rmp, 0-3,600 max ipm, M18 and M12 multi-voltage charger, fuel gauge on battery, LED light and weighs 3.6 lbs with battery. Includes two M18 Redlithium XC high capacity battery packs, one-hour multi-voltage charger, belt clip and carrying case. The POWERSTATE brushless motor delivers up to 2,000 in-lbs of torque and up to 30 percent faster driving speed, increasing user?s productivity for the most demanding fasteners on the job. At only 4.59? in length, this is the most compact tool in its class, allowing users to have more access in tight spaces. The REDLINK PLUS intelligence ensures maximum performance and protects from overloads, heating and or over-discharge. The REDLITHIUM battery pack delivers more work per charge and more work over the life of the pack when compared to competitors. The 4-mode DRIVE CONTROL provides greater control over output speed and power, for greater versatility. The self-tapping screw mode provides faster installation time by reducing stripping of fasteners. Specs: 0-3,600 RPM, 0-4,300 IPM, 2,000 in-lbs max torque. Includes: (1) M18 FUEL 1/4" Hex Impact Driver, (2) 18 volts M18 RedLithium extended capacity battery packs, (1) M18 & M12 multi-voltage charger, (1) belt clip, (1) bit holder and (1) carrying case. Powerful motor delivers 11,000 to 18,000 OPM. RedLithium battery delivers more work per charge and more work over pack life. All-metal gear case for added jobsite durablility. Tool-free blade change offers faster changes and no tools to misplace. Built-in LED light illuminates dark work spaces. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians. The cordless Multi-Tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to work. Weighs only 4.15 lbs and is 14" in length. The Kit includes: (1) M18 Cordless Multi-Tool, (2) M18 RedLithium XC Extended capacity batteries, (1) M18 & M12 Multi-Voltage charger, (1) adapter, (5) assorted sanding sheets, (1) sanding pad, (1) wood cutting blade and (1) contractor bag.
   
 
1