Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > FASTENING
Choose a sub category:
STAPLERS-OFFICE STAPLE GUNS-HAND STAPLE GUNS-HAMMER
STAPLE GUNS-ELECTRIC STAPLES BRADS
POP RIVET TOOLS POP RIVETS POWER HAMMERS
POWER HAMMER LOADS POWER HAMMER PINS
Sort By:
1
Arrow RLA1/8 Long Pop Rivet Arrow RLS1/8 Long Pop Rivet Arrow RLA3/16 Long Pop Rivet
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Arrow RMA1/8 Medium Pop Rivet Arrow RMA3/16 Medium Pop Rivet Arrow RMA5/32 Medium Pop Rivet
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Arrow RMS1/8 Medium Pop Rivet Arrow RSA1/8 Short Pop Rivet Arrow RSA3/16 Short Pop Rivet
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Arrow RSA5/32 Short Pop Rivet Arrow RSS1/8 Short Pop Rivet Stanley SWKBN050S Nail
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Used for craft, hobby and finish carpentry projects. Sturdy plastic packaging reduces staple breakage. Fits TR200, TR250, TRE500, TRE550, TRE650 Electric Brad Nailers.
SureBonder FPC42AB Short Blind Rivet SureBonder FPC42S Short Blind Rivet SureBonder FPC48S Long Blind Rivet
SureBonder Blind Rivet, Short, SureBonder, 1/8 in Diameter, 0.063 - 1/8 in Grip, Aluminum Rivet, Aluminum Mandrel, Brown SureBonder Blind Rivet, Short, SureBonder, 1/8 in Diameter, 0.063 - 1/8 in Grip, Steel Rivet, Steel Mandrel SureBonder Blind Rivet, Long, SureBonder, 1/8 in Diameter, 0.376 - 1/2 in Grip, Steel Rivet, Steel Mandrel
SureBonder FPC4SWAS Short Blind Rivet Washer Arrow RSAW1/8 Short Pop Rivet Arrow WA1/8 Rivet Washer
SureBonder Blind Rivet Washer, Short, SureBonder, 1/8 in Nominal, Steel Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use washers when joining soft materials or when existing hole is oversize.
Arrow WS1/8 Rivet Washer Arrow WA316 Rivet Washer Stanley SWKBN625S Nail
Use washers when joining soft materials or when existing hole is oversize. Use washers when joining soft materials or when existing hole is oversize. Used for craft, hobby and finish carpentry projects. Sturdy plastic packaging reduces staple breakage. Fits TR200, TR250, TRE500, TRE550, TRE650 Electric Brad Nailers.
Stanley Tools TRA204T  Staples Stanley Tools TRA205T  Staples Stanley Tools TRA704T  Staples
Used for light duty household and crafting stapling jobs. Color coded packaging for easy product selection, sturdy plastic packaging reduces staple breakage. Fits TR45 and Arrow JT-21 staplers Used for light duty household and crafting stapling jobs. Color coded packaging for easy product selection, sturdy plastic packaging reduces staple breakage. Fits TR45 and Arrow JT-21 staplers For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700
Stanley TRA705T Narrow Crown Staple SureBonder FPC68A Long Blind Rivet SureBonder FPC62A Short Blind Rivet
For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700 SureBonder Blind Rivet, Long, SureBonder, 3/16 in Diameter, 0.376 - 1/2 in Grip, Aluminum Rivet, Aluminum Mandrel SureBonder Blind Rivet, Short, SureBonder, 3/16 in Diameter, 0.063 - 1/8 in Grip, Aluminum Rivet, Aluminum Mandrel
Stanley PBS4 Rivet Backup Plate Stanley TRA700 Narrow Crown Staple Stanley TRA700 Narrow Crown Staple
Used for joining soft materials, such as leather, or when the hole is oversized; adds strength to rivet hole. For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700 For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700
STAPLES HVDY 1250PC 1/4IN     Arrow RSAB1/8 Short Pop Rivet Stanley TRA200 Wide Light Duty Crown Staple
Works with the TRA700 series Stapler. They can be used for insulation, carpet underlayment and roofing felt. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Used for light duty household and crafting stapling jobs. Color coded packaging for easy product selection, sturdy plastic packaging reduces staple breakage. Fits TR45 and Arrow JT-21 staplers
Stanley Tools TRA709T  Staples STAPLES HVDY 1250PC 5/16IN    Arrow 225 Flat Crown Staple
For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700 Works with the TRA700 series Stapler. They can be used for insulation, carpet underlayment and roofing felt. Precision made. For use with model P22 plier-type stapler.
Arrow 224 Flat Crown Staple STAPLES HVDY 1250PC 3/8IN     STAPLES HVDY 1250PC 1/2IN
Precision made. For use with model P22 plier-type stapler. Works with the TRA700 series Stapler. They can be used for insulation, carpet underlayment and roofing felt. Works with the TRA700 series Stapler. They can be used for insulation, carpet underlayment and roofing felt.
Arrow RSST1/8 Short Pop Rivet STAPLE R19 5000PK 1/4IN       BAR/SPREADER CLMP 1-1/2X4INCH
STAPLE R19 5000PK 1/4IN
Our Price: $4.04
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. For use with Arrow model HT19 tacker. Quick release trigger, black nylon body and handle, orange PP clamp and spreader. Durable, flexible and lightweight.
Arrow BN1820CS Brad Nail Arrow BN1810CS Brad Nail Ramset 1506 Drive Pin
Ideal for a variety of indoor and outdoor projects including wood and artificial trim, picture frames and detail work; also good for upholstery, crafts, trellis and screen repair; for use in thin brad nail applications where wood thickness is less than 5/8"; helps to offer the gripping power required to hold materials together; brads are 18 gauge steel and brown head for color matching; for use in "Arrow" Powershot, Surebonder, "Stanley", "Sears Craftsman", "Black & Decker" and "Master Mechanic". Ideal for a variety of indoor and outdoor projects including wood and artificial trim, picture frames and detail work; also good for upholstery, crafts, trellis and screen repair; for use in thin brad nail applications where wood thickness is less than 5/8"; helps to offer the gripping power required to hold materials together; brads are 18 gauge steel and brown head for color matching; for use in "Arrow" Powershot, Surebonder, "Stanley", "Sears Craftsman", "Black & Decker" and "Master Mechanic". Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter.
Ramset 1516A Drive Pin Stanley PAA44-1B Reusable Pop Rivet Stanley PAA48-1B Reusable Pop Rivet
Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
Stanley PSS44-1B Reusable Pop Rivet Stanley PSS48-1B Reusable Pop Rivet Stanley PAA42-1B Reusable Pop Rivet
Used for joining steel to steel. Reusable, full-visibility packaging simplifies product selection and storage. High strength, all steel construction. Used for joining steel to steel. Reusable, full-visibility packaging simplifies product selection and storage. High strength, all steel construction. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
Stanley PSS42-1B Reusable Pop Rivet Arrow RSA1/8IP Small Pop Rivet Arrow RSS1/8IP Short Pop Rivet
Used for joining steel to steel. Reusable, full-visibility packaging simplifies product selection and storage. High strength, all steel construction. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Stanley PAA52-5B Reusable Pop Rivet Stanley PAA46-1B Reusable Pop Rivet Powercrown STCR50193/8-1M Crown Staple
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. 7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
Arrow RSA3/16IP Short Pop Rivet Ramset 1508 Drive Pin PADS REFILL SL 300
PADS REFILL SL 300
Our Price: $5.35
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter. Refill pads fit your existing SL300 bar clamp; replace damaged or worn-out pads in your Irwin tools; snap right on your clamp.
CLAMP/PIN UNIVERSAL PVC       BRAD NAIL 1-1/2IN 18GA        Arrow RMA3/16IP Medium Pop Rivet
Clamp dust barrier to rod. Use pins to secure dust barrier to top foot. Arrow Brad Nail, 18 ga, 1-1/2 in Length, Round Head, Chisel Point, Round Shank, Steel, Galvanized, For Use With: EBN320 Red Electric Brad Nail, Brown, For Indoor/Outdoor Use Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Arrow RSAW1/8IP Short Pop Rivet Arrow RLA3/16IP Long Pop Rivet Arrow RMA1/8IP Medium Pop Rivet
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Arrow RMS1/8IP Medium Pop Rivet Stanley PAA66-5B Reusable Pop Rivet Stanley PAA610-5B Reusable Pop Rivet
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
HOOK MULTI-PRPS QK SUPPORT STL Ramset 00810 Washered Pin Arrow T50 Multi-Pack Staple
Works with all TASK Quick Support Rods. Hardened steel. For hanging paint cans or other materials or tools. With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter. Arrow Multi-Pack Staple, Heavy Duty, Series: T50, 1/2 - 3/8 in Leg Length, Includes: (625) 1/4 in, (625) 3/8 in and (625) 1/2 in Leg Length Staples, 1875 Pieces
Amerimax 84025 Gutter Rivet Powercrown STCR50191/2-1M Crown Staple NAIL BRAD 18G PK1000 2IN BROWN
Used to connect gutter parts together and fasten other light-gauge metals. Theses rivets feature durable aluminum construction. 7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000. Arrow Brad Nail, 18 ga, 2 in Length, Round Head, Chisel Point, Round Shank, Steel, Galvanized, Brown, For Indoor/Outdoor Use
Amerimax 84034 Gutter Rivet Arrow BN18 Nail Irwin Quick Grip 53006 Micro Bar Clamp/Spreader
Used to connect gutter parts together and fasten other light-gauge metals. Theses rivets feature durable aluminum construction. Made of 18 gauge steel, head hides brad in wood. Positive locking action to hold work tight. For clamping small and odd shapes securely for home, craft or hobby work. Can also be used as spreaders.
Stanley PAA58-5B Reusable Pop Rivet Stanley PAA42W-1B Reusable Pop Rivet Stanley PAA54-5B Reusable Pop Rivet
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
Arrow Fastener 65S  Staples Stanley-Bostitch STCR26191/4 Power Crown Staples Stanley PAA64-5B Reusable Pop Rivet
For use in model HT-65 staple hammer tacker extra heavy-duty. Fits Bostitch T5-6, H30-6 and P6C-6. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
Stanley PAA62-5B Reusable Pop Rivet Stanley PAA68-5B Reusable Pop Rivet Arrow RLA1/8IP Long Pop Rivet
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize.
Arrow RLS1/8IP Long Pop Rivet Ramset CW Single Shot Powder Load RIVET ALUM ASSORTMENT 500PC
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Crimped brass cartridges for single shot, powder actuated Ramset/Red head tools. Interchangeable with all makes and models of single shot, low velocity tools. Color-coded for power level. Carded. Rustproof aluminum heads with steel shanks, Hardened, 100 lb (45 kg) ultimate shear strength, 150 lb (68 kg) ultimate tension strength, Neatly organized in a divided PVC storage case with chart inside box lid for easy selection.
CLAMP BAR/SPREADER 2-1/2X6IN  STAPLE GUN LIGHT WEIGHT CHROME PIPE CLAMP FIXTURE 1/2IN
Quick release trigger, black nylon body and handle, orange PP clamp and spreader. Durable, flexible and lightweight. All steel chrome plated body. Ergonomic finger groove handle base. Bottom loading for easy jam cleaning. Staples are interchangeable with Arrow JT-21. Staple Sizes: 1/4"-6mm and 5/16"-8mm. Includes: 300 Piece Staples. Strong malleable steel construction. Ideal for wood working and metal working applications. Spring lever control locks jaw at any needed location and provides quick release. Crank handle provides an excellent grip for quick tightening.
Arrow BN18 Nail Stanley-Bostitch STCR26195/16 Power Crown Staples Stanley TR35 Light Duty Staple Gun
Made of 18 gauge steel, head hides brad in wood. 7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000. Great for screen repairing, light upholstery work, arts and crafts projects and scores of other light duty household tacking chores. Comfortable soft grip and handle, easy squeeze mechanism, built-in stapler remover, large reload window on bottom of stapler.
Arrow RK6120 Rivet Assortment Pack CLAMP BAR/SPREADER 2-1/2X12IN Stanley Tools TRA704-5C  Staples
Reusable, 6 storage compartments 25 each 1/8" x 1/8" aluminum and steel; 20 each 1/8" x 1/4" aluminum and steel; 15 each 1/8" x 1/2" aluminum and steel. Quick release trigger, black nylon body and handle, orange PP clamp and spreader. Durable, flexible and lightweight. For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700
CLAMP BAR RATCH STL 2-1/2X12IN Stanley SharpShooter TR45 Light Duty Staple Gun Ramset 1514 Drive Pin
Slide locking mechanism offers quick action. 2-1/2" Reach. Heat treated and precision notched steel bar. Solid and comfortable rubber handle. Perfect for everyday stapling needs around the home or office. Lightweight with convenient handle lock. Quick clear mechanism. Chrome plated steel construction. Uses 1/4" and 5/16" light duty staples. Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter.
Ramset 1512 Drive Pin Arrow Fastener 305IP  Staples Arrow Fastener 306IP  Staples
Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter. For T32, T32MHT30 Staples & HT30 Hammer Guns. For T32, T32MHT30 Staples & HT30 Hammer Guns.
Arrow Fastener S107  Staples PAD GRIPPER 2-5/8IN X 8IN QSR Arrow JT27 Junior Light Duty Staple Gun
For use in model 107 stapler. Painted blue. Made of rubber and steel. For wet or delicate surfaces with larger pad area. Pads can only be mounted at the top end of the quick support rod. All steel construction with a chrome finish, contoured handle, plastic stop, jam proof mechanism and visual refill window. Used in applications such as displays, silk screens, light upholstery, crafts and posters.
CLAMP BAR/SPREADER 2-1/2X18IN Stanley TRA700 Crown Staple T50 Pro-Pack 504IP Flat Crown Staple
Quick release trigger, black nylon body and handle, orange PP clamp and spreader. Durable, flexible and lightweight. For Use With:  Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL; Arrow: T50, T50PBN, ETF50, T55, HT50; Powershot: 5700 For use in Arrow No. ET50, ETC50, ETN50, ETF50, ETF50BN, T55C, T55, T50, T50PBN staple gun tackers and ETC50 cordless gun tacker.
T50 Pro-Pack 508IP Flat Crown Staple T50 Pro-Pack 506IP Flat Crown Staple Arrow Fastener 205  Staples
For use in Arrow No. ET50, ETC50, ETN50, ETF50, ETF50BN, T55C, T55, T50, T50PBN staple gun tackers and ETC50 cordless gun tacker. For use in Arrow No. ET50, ETC50, ETN50, ETF50, ETF50BN, T55C, T55, T50, T50PBN staple gun tackers and ETC50 cordless gun tacker. For upholstery, insulation, weather stripping and more. Fits T2025 staple gun tacker.
Quick Grip 226200 Light Duty Corner Clamp T50 Pro-Pack 505IP Flat Crown Staple Arrow JT21CM Light Duty Staple Gun
Corner clamp is perfect for picture frames, and smaller projects. For use in Arrow No. ET50, ETC50, ETN50, ETF50, ETF50BN, T55C, T55, T50, T50PBN staple gun tackers and ETC50 cordless gun tacker. Load full strip of (100) ARROW staples of .030 wire in sizes 1/4", 5/16" and 3/8" staples. Visual refill window. Perfect for screen repairing, light upholstery work, kitchen shelf trimming, closet lining, cornice covering and scores of other light duty household tacking chores. No. JT21M : All steel construction. Jam-proof mechanism. Hand-contoured handle. Built-in staple lifter. Household baked enamel finish. No. JT21CM: Durable hi-impact molded plastic housing. Safety handle lock. All steel channel and track for non-wearing, jam-proof performance.
Ramset 06171/1503K Knurled Drive Pin Arrow Fastener 505SS1 T50 Staples Arrow RL100 Light Duty Rivet Tool
Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter. For use with Arrow model No. HT-50A, T50, and T55  series staple guns.  Use in areas that need the protection of stainless steel to help fight corrosion. These are not made of 'Monel' which is for use in areas exposed to salt water. All-steel construction with comfortable vinyl grip. Spring-loaded handle for easy rivet loading and ejection. Changeable nose piece takes 1/8" and 5/32" diameter rivet in one hole and 3/16" in other hole. To change hole size, loosen screw on nose piece plate and pivot plate around, tighten screw. NOTE: Not recommended for use with 3/16" All Steel Rivets.
T50 50424/504 Flat Crown Staple CLAMP BAR RCHT 2-1/2X24IN STL Arrow Fastener 206  Staples
The T50 staples are made of .050 wire. They come 1,250 to a pack. Slide locking mechanism offers quick action. 2-1/2" Reach. Heat treated and precision notched steel bar. Solid and comfortable rubber handle. For upholstery, insulation, weather stripping and more. Fits T2025 staple gun tacker.
CLAMP BAR/SPREADER 2-1/2X24IN T50 50524/505 Flat Crown Staple Ramset 1516 Drive Pin
Quick release trigger, black nylon body and handle, orange PP clamp and spreader. Durable, flexible and lightweight. The T50 staples are made of .050 wire. They come 1,250 to a pack. Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter.
T50 506SS1 Flat Crown Staple Irwin Quick Grip 546 Mini Bar Clamp T50 508SS1 Flat Crown Staple
Not for Marine Applications. Stainless steel to resist rust. Use With:  Arrow staple or staple/nail gun Nos.ET50, ETC50, ETF50BN, ETF50PBN, ETFX50 (307.9233), ETN50), T50 (647.9125), T50OC, T55 (647.8093), in hammer staple/tacker No.HT50 (688.1007), in brad nailer/staple gun No.T50PBN (696.5909), and in tacker gun No.T55C. Constructed of high-tech reinforced resin for strength and durability. These clamps are 25 percent smaller for working in confined spaces. Exerts up to 150 lbs. of clamping pressure. Pistol grip design enhances comfort and ease of use. Non marring pads grip firmly and protect work. Throat depth 2-7/16". For use with Arrow model No. HT-50A, T50, and T55  series staple guns.  Use in areas that need the protection of stainless steel to help fight corrosion. These are not made of 'Monel' which is for use in areas exposed to salt water.
Arrow Fastener 60430  Staples T50 50824/508 Flat Crown Staple Arrow TruTac TT21 Light Duty Forward Stapler
For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020; Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM; Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481; Black & Decker 9701, 9700; Stanley Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300; Ace Hardware 27175, 22084 and 22087. The T50 staples are made of .050 wire. They come 1,250 to a pack. Easy to squeeze design - female can squeeze with one hand; comfortable ergonomic grip, precise; user friendly forward action design; compact for easy storage; ideal for projects around the home: home decor, decorating, quick repairs around the house, crafting and hobby projects; uses "JT21" staples in three sizes up to 3/8" (10mm).
Vise-Grip 165 Locking C-Clamp T50 50CT24 Flat Crown Staple Irwin Quick Grip 5412 Mini Bar Clamp
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use without damaging the work surface. Flat crown used for ceiling tile insulation. Pack size: 1,250. Constructed of high-tech reinforced resin for strength and durability. These clamps are 25 percent smaller for working in confined spaces. Exerts up to 150 lbs. of clamping pressure. Pistol grip design enhances comfort and ease of use. Non marring pads grip firmly and protect work. Throat depth 2-7/16".
CLAMP BAR RCHT 2-1/2X36IN STL Ramset 1524 Drive Pin Arrow Fastener 60530  Staples
Slide locking mechanism offers quick action. 2-1/2" Reach. Heat treated and precision notched steel bar. Solid and comfortable rubber handle. Use with Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 strips and 25cal. discs. For models of low velocity powder actuated tools with.300 or larger barrel diameter. Knurled shank pins for fastening to structural steel; 0.145" diameter. For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020; Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM; Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481; Black & Decker 9701, 9700; Stanley Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300; Ace Hardware 27175, 22084 and 22087.
T50 50924/509 Flat Crown Staple Arrow P22 Gun Plier Stapler Arrow Fastener 208  Staples
The T50 staples are made of .050 wire. They come 1,250 to a pack. All steel construction; chrome finish. Hand guide loop. Camp-actuated double leverage. Deep  2-1/2" throat. Easy-to-get-at mechanism. Loads (150) No. P22 staples only, in two sizes, 1/4" (sku # 600.1283) and 5/16" (sku # 424.3184). For upholstery, insulation, weather stripping and more. Fits T2025 staple gun tacker.
Ramset 1516E Ramguard Pin Arrow Fastener 256  Staples Arrow Fastener 257  Staples
Coated to improve corrosion resistance in treated lumber and other applications. Fits most powder actuated tools that use 22cal. single shots, 27cal.; 0.145" shank diameter. For use in No. T-25 low voltage wire staple gun tacker. For use in No. T-25 low voltage wire staple gun tacker.
Arrow 606 600 Flat Wide Crown Staple CLAMP BAR/SPREADER 2-1/2X36IN 1-1/4IN WASHERED PIN
For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020; Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM; Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481; Black & Decker 9701, 9700; Stanley Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300; Ace Hardware 27175, 22084 and 22087. Quick release trigger, black nylon body and handle, orange PP clamp and spreader. Durable, flexible and lightweight. With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter.
RD SUPP 2-3/8X13-5/8IN RUBB   T50 50624/506 Flat Crown Staple Ramset 1512SD Washered Pin
Made of EVA (Ethylene Vinyl Acetate) foam and steel. Protects textured or decorated surfaces. Pads can only be mounted at the top end of the quick support rod. The T50 staples are made of .050 wire. They come 1,250 to a pack. With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter.
Irwin Quick Grip 223106 Clutch Lock Bar Clamp Ramset 1508SD Washered Pin Original 17 Locking C-Clamp
Clutch Lock Steel Bar Clamp with soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat Depth 3 - 1/8". With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter. Locking mechanism guarantees no slippage. Jaws open wide for versatility.
Stanley MR33C Right Angle Riveter Ramset 1524SDP Washered Pin 2IN WASHERED PIN
Right angle riveter sets 1/8", 5/32" and 3/16" diameter rivets. Spring loaded handle ejects rivet stem automatically, slim nose design fits in tight hard to reach places. With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter. With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter.
Trim Clip 003027 Corner Glue Clamp Quick Grip 224212 Pipe Clamp Stanley-Bostitch STCR50191/2-4M Power Crown Staples
Corner clamps that helps achieve tight miter joints by providing strong pressure on the glue joints; unique 4-point cam system and positive lock; single hand operation. Made in USA. New clutch system eliminates the need for threaded pipe. Larger feet offer more stability and clearance between handle and worktop. Larger, more ergonomic handle.  Larger clutch plates allow for easier release and increased durability and dependability. 7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
STAPLE GUN ALL-IN-ONE PRO     Stanley TR110 Light Duty Staple Gun Powercrown STCR50193/8-5M Crown Staple
STAPLE GUN ALL-IN-ONE PRO
Our Price: $16.63
All Steel Construction With Non Slip Grip Handle. Easy Access To Remove Jams. Uses All Brands & Sizes Heavy Duty Staples: Arrow T50 (Narrow Crown), Duo-Fast (Wide Crown), PowerFast (Wide Crown), Bostitch (Power Crown). Staple Sizes: 1/4" -6mm, 5/16"-8mm, 3/8"-10mm, 1/2"-12mm, 9/16"-14mm. Use for everyday stapling needs around the  home or office. Lightweight with convenient handle lock for safe storage, quick jam clear mechanism saves time and hassle, chrome plated steel construction for durability. 7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
Fast Release 17T Locking C-Clamp With Regular Tips Irwin Quick Grip 223112 Clutch Lock Bar Clamp Vise-Grip 18 Locking C-Clamp
'Fast Release' Locking C-Clamps with Regular Tips. Easier to open, has a no-pinch release, and offers more finger room. Wide-opening jaws provide greater versatility in clamping a variety of shapes. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Clutch Lock Steel Bar Clamp with soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat Depth 3 - 1/8". Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use without damaging the work surface.
STAPLE GUN MANUALT50 STAPLES  TACKER HAMMER LT WIRE RUB GRIP Ramset 1516SDC Washered Pin
Chrome plated steel construction for durability; soft rubber grip handle; bottom loading magazine saves time and hassle; visual refill window shows the user if they have staples loaded; uses T50 stples: 1/4" (6mm - sku #s - 611.7238, 187.2142); 5/16" (8mm - sku #s - 584.6472, 509.4974); 3/8" (10mm - sku # 962.6045); 1/2" (12mm - sku #s 192.8522, 060.7077); 17/32" (13mm) and 9/16" (14mm); designed in USA. Lightweight design; Pro's choice to install insulation; ergonomic soft rubber grip provides maximum comfort; durable all-steel construction, chrome magazine and hardened steel internal components; uses 3 sizes of staples 1/4", 5/16" and 3/8". With 7/8" washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22cal. single shots, 27cal. 10 shot strips and 25cal. discs. 0.145"  shank diameter.
Arrow Fastener 60830  Staples Quick Grip 224134 Pipe Clamp ROD EXTENSION QUICKSUPORT 18IN
For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020; Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM; Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481; Black & Decker 9701, 9700; Stanley Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300; Ace Hardware 27175, 22084 and 22087. New clutch system eliminates the need for threaded pipe. Larger feet offer more stability and clearance between handle and worktop. Larger, more ergonomic handle.  Larger clutch plates allow for easier release and increased durability and dependability. Extends any quick support rod by 18".
Arrow RMA3/16BP Medium Pop Rivet JT21 214 Flat Crown Staple JT21 215 Flat Light Duty Crown Staple
Use steel rivets for very heavy duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather, etc. Use washers when joining soft materials or when existing hole is oversize. Precision made. Use in No. JT21M, JT21CM, and J27 staple gun tackers. Precision made. Use in No. JT21M, JT21CM, and J27 staple gun tackers.
Ramset 1516SDE Ramguard Pin Arrow Fastener 60930  Staples Surebonder 5650 All-In-1 Staple Gun
Provides easier penetration into concrete, drywall, and structural steel. 7/8" washer prevents overdrive and increase holding value when fastening wood or thin metal to concrete or structural steel. Fits most powder actuated tools that use 22cal. single shots, 27cal; 0.145' shank diameter. For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020; Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM; Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481; Black & Decker 9701, 9700; Stanley Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300; Ace Hardware 27175, 22084 and 22087. Use any brand or size of heavy duty staples. A unique black painted All in 1 staple gun.  Easy drop in staple loading. Viewing window lets you know if you need to load staples. Use with: Surebonder #4, #5, #6, #11 heavy duty staples or Arrow T50, Powerfast, Stanley, Duo-Fast, Bostitch, Craftsman, Master Mechanic, Do-it, Ace Hardware, Black & Decker and Unifix staples.
Arrow Fastener T50X Tacmate Staple Guns Irwin Quick Grip 223118 Clutch Lock Bar Clamp BAND CLAMP 1IN X 15FT
BAND CLAMP 1IN X 15FT
Our Price: $19.37
The compact design and precision make it easy to use one-handed, leaving your other hand free to assist in your project, such as holding your fabric taut; powerful; uses T50 staples: 1/4" (skus 611.7238, 187.2142), 5/16" (skus 584.6472, 509.4974), 3/8" (sku 962.6045) and 1/2" (skus 192.8522, 060-7077). Clutch Lock Steel Bar Clamp with soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat Depth 3 - 1/8". For use on large and irregular-shaped projects; the mechanical clamp parts are made of metal; the nylon band can hold up to 350 lbs.
Arrow T50 Staple Gun Stanley SharpShooter TR150 Staple Gun Powercrown STCR50191/4-6M Crown Staple
All steel construction; high carbon hardened steel working parts. Visual refill window. Patented jam-proof mechanism. Easy double leverage operation. Loads (85) Arrow No. T-50 staples only of .050 wire in 6 sizes; 1/4", 5/16", 3/8", 1/2", 9/16" and Ceiltile from light to heavy duty work. Used by building contractors, home do-it-yourselfers, and speciality trade applicators. Exclusive anti-jam mechanism. Low stroke handle to reduce hand fatigue. High power and penetration. Easy slide full stick staple load. 7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
PIPE CLAMP FIXTURE 3/4IN      Kreg KHC-PREMIUM Face Clamp Irwin Quick Grip 223124 Clutch Lock Bar Clamp
PIPE CLAMP FIXTURE 3/4IN
Our Price: $19.70
Strong malleable steel construction. Ideal for wood working and metal working applications. Spring lever control locks jaw at any needed location and provides quick release. Crank handle provides an excellent grip for quick tightening. Features a 3" reach and will handle work pieces up to 2-3/4" thick; extra large pad on one arm which is placed on the show side of the joint to help create a perfectly flush joint as the screws are driven; has ergonomic comfort grips for reduced slippage and to eliminate the possibility of pinching. Clutch Lock Steel Bar Clamp with soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat Depth 3 - 1/8".
Ramset 1524SDE Ramguard Pin JT21 276 Flat Crown Staple Irwin Quick Grip SL300 Bar Clamp/Spreader
Provides easier penetration into concrete, drywall, and structural steel. 7/8" washer prevents overdrive and increase holding value when fastening wood or thin metal to concrete or structural steel. Fits most powder actuated tools that use 22cal. single shots, 27cal; 0.145' shank diameter. Precision made. Use in No. JT21M, JT21CM, and J27 staple gun tackers. Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads.
Arrow HT55BL Hammer Tacker Arrow RH200 Professional Easy Pull Rivet Tool RD SUPP 2-3/8X27-1/2IN RUBB
Perfect for pros in need of a lightweight hammer tacker that has the power to complete projects quickly; has a quick loading magazine design built to help pros load the tool quickly; has a durable chrome plated steel housing, well balanced handle which makes it ideal for insulation and housewrap; visual refill window shows the user if they have staples loaded. All steel construction. Comfortable vinyl grip. Spring-loaded handle for easy rivet loading and ejecting. Extended nose for hard-to-get-at places, Locks when not in use. Used on aluminum, canvas, metal; also for installing, repairing and 1,001 uses. Includes 4 nose pieces with wrench. Use 4 rivet sizes: 3/32" (2.5mm), 3/16" (5mm). Made of EVA (Ethylene Vinyl Acetate) foam and steel. Protects textured or decorated surfaces. Pads can only be mounted at the top end of the quick support rod.
Bostitch PowerCrown T6-8 Staple Gun Stanley SharpShooter PHT150C Hammer Tacker Irwin Quick Grip 5462 Mini Bar Clamp
Lightweight die cast aluminum design with steel handle, over molded rubber grip for comfort and convenient bottom loading for quick and easy reloading. Nickel chrome plated steel magazine. Used for house wrap, tar paper. Weight 1.9 lb., magazine capacity 84 staples, 1/4" ? 9/16" STCR5019 series Power Crown staples; Orgill sku#s, 160.8504, 341.8647, 433.9438, & 744.7915. Full- rubber grip absorbs shock and protects hand. Loads two full sticks of Stanley Sharp Shooter TRA700 or Arrow T-50  heavy duty staples (1/4"-3/8") capacity is 84 staples. Constructed from high-tech resin material, they are strong, lightweight, and durable. Soft pads protect work surfaces. Positive locking action to hold work tight. Can be used with one hand. Ideal for clamping small and odd shapes securely. Applies gradual even pressure. Quick-release trigger lets go with a squeeze. Smaller, for tight work spaces. Throat depth 2-7/16". Two  No. 546 ( 693.4822) bar clamps included.
Arrow Fastener 259  Staples CLAMP WOODEN HANDSCREW        HAMMER STAPLE/TACKER HD
CLAMP WOODEN HANDSCREW
Our Price: $22.81
HAMMER STAPLE/TACKER HD
Our Price: $22.82
For use in No. T-25 low voltage wire staple gun tacker. Jaws adjust to any angle for clamping non-parallel surface and odd shapes; set up and remove quickly and easily; easy to adjust the angles of the jaws to fit odd-shaped work pieces; wooden clamps grip securely without marring work piece surfaces. Comfortable Anti-slip Grip Handle. Staples Are Interchangeable With Arrow T50. Staples Size: 1/4-6mm, 5/16-8mm, 3/8-10mm.
Arrow Fastener T25X Wiremate Wiring Tackers BAR CLAMP 36IN LIGHT DUTY     Stanley MR55C5 Right Angle Riveter
BAR CLAMP 36IN LIGHT DUTY
Our Price: $23.05
Great for wiring projects; compact; powerful; precise; grooved guide ensures consistent stapling; for wires up to 1/4" (6mm) diameter; uses T25 staples (sku #s: 415.8796, 415.8812, 415.8846). Clutch lock provides easy movement along bar; the non-marring pads protect the work piece; Easy to use. Spring loaded handle ejects rivets automatically. Sets 1/8", 3/32", 5/32" and 3/16""diameter rivets. All steel construction for long lasting durability, alternate nose pieces and wrench store in handle.  RIGHT ANGLE RIVETER REPLACES MR88.
Irwin Quick Grip SL300 Bar Clamp/Spreader BAR CLAMP 36IN STEEL 100SERIES Irwin Quick Grip 54122 Mini Bar Clamp
Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads. Soft-grip handle is larger and more ergonomic, allowing high clamping pressure with less effort; I-beam bar reduces flexing and bowing; locking clamp is great for general workshop needs; clutch lock mechanism lets you quickly and easily adjust jaw with the touch of a button; larger clutch plates allow for easier release and increase durability and dependability. Ideal for clamping or gluing, holding work for sawing or drilling and positioning work for fastening; 25 percent smaller for working in contained areas or small projects; constructed of high tech reinforced resin for strength and durability; exerts up to 150 lbs of clamping pressure; patented pistol grip design enhanced comfort and ease of use; non marring pads grip firmly and protect work; throat depth 2-7/16"; 2 clamps per card.
Stanley SHCR50193/8 Crown Staple Arrow T50 Monel Staple Powercrown STCR50191/4-1M Crown Staple
For heavy duty stapling hammer model No.H2B. Ideal for marine applications; rustproof and will not corrode in salt water; should not be used and will corrode with any wood that has been treated with ACQ (pressure treated wood). Fits Arrow T50, HT50, T50X, HT55BL, T55BL, TT50, T50PBN, T50 RED, T50 Elite and other T50 staple guns. 7/16 " crown. For Use With  Bostitch:  PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
Stanley MR77C Swivel Head Riveter DeWalt DWHTTR350 Staple/Nail Gun Original 19 Locking C-Clamp
Sets rivets at a right angle or straight on with a simple twist of riveter head, rugged die cast metal construction for extra life. Improved leverage sets 1/8", 3/32", 5/32", and 3/16" diameter with ease. Alternate nose pieces and wrench store in handle. Easy-squeeze technology helps reduce actuation force; anti-jam magazine prevents jams and misfires; heavy-duty stapling mechanism for durability; surface guard to prevent damage to underlayment material; ergonomic design is weighted forward for comfortable use; uses Dewalt Heavy Duty Staples series DWHTTH700 available sizes 5/16" (8mm), 3/8" (10mm), 1/2" (12mm), also uses same range of Stanley TRA700 series Heavy Duty Staples plus Arrow T-50 Heavy Duty Staples. Locking mechanism guarantees no slippage. Jaws open wide for versatility.
Stanley MR100CG Contractor Grade Riveter STORAGE BAG QUICK SUPPORT ROD Arrow RHT300 Twister Rivet Tool
Rugged die cast metal construction. Sets 1/8", 5/32" and 3/16" diameter rivets. Especially suited for stainless steel rivets in marine applications. Equipped with removable ejector spring. Hand carrier storage bag for QSR rods and accessories. Inside zip pocket for smaller accessories. Made from nylon fabric (600D x 300D). Unique ``Twistable" Head, rotates 360 degrees for any angle riveting. All-steel construction. Comfortable vinyl grip. Spring-loaded handle for easy rivet loading and ejecting. Extended nose for hard-to-get-at places. Lock clip when not in use. Four nose pieces with wrench. Uses four rivet sizes: 3/32" (2.5mm), 1/8" (3mm), 5/32" (4mm), and 3/16" (5mm). Not for use with stainless steel rivets.
BAR CLAMP 30 INCH 100 SERIES  Irwin Quick Grip SL300 Bar Clamp/Spreader Vise-Grip 20 Locking C-Clamp
Soft-grip handle is larger and more ergonomic, allowing high clamping pressure with less effort; I-beam bar reduces flexing and bowing; locking clamp is great for general workshop needs; clutch lock mechanism lets you quickly and easily adjust jaw with the touch of a button; larger clutch plates allow for easier release and increase durability and dependability. Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use without damaging the work surface.
Stinger 136450 Lightweight Hammer Tacker Ramset HD222 Hammer Drive Tool PIPE CLAMP 3/4IN DEEP THROAT
An ideal tool for installing roofing felt, housewrap and insulation; lightweight and easy to maneuver, but constructed with heavy-duty steel for durability; the tool features an anti-slip, ergonomic rubber handle to help with ease of use; holds 168 staples; recommended for use with "STINGER" 3/8" A-11 staples for best performance; compatible with  3/8" staples only; quick-load magazine. Powerful single shot, hammer driven powder actuated tool. Fastens wood to cement, metal to cement, or metal to metal. Instantly drives fasteners into place with a single blow of a one pound hammer. Uses standard .22 caliber medium load single shot powder loads. Quiet, shock absorbing system lowers recoil for operator comfort. Funnel-shaped handle provides a large target while protecting hands. Positive barrel and load retention prevents barrel from opening freely, allowing easy horizontal and overhead fasting. Specs:  Pin Capacity: 2 1/2 in (3"w/washer). Larger feet offer more stability and clearance between handle and worktop; larger, more ergonomic handle offers easier clamping with reduced hand fatigue; larger clutch plates allow for easier release and increased durability and dependability.
Arrow HT30 Light Duty Hammer Tacker Irwin Quick Grip XP600 High Pressure Bar Clamp/Spreader TACKER MULTI-FUNC 5-N-1 ALUM