Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > CLAMPS & VISES > BAR/PIPE CLAMPS
Sort By:
1
C-CLAMP HEAVY DUTY 1IN        C-CLAMP 1IN 100SERIES         C-CLAMP HEAVY DUTY 2IN
C-CLAMP HEAVY DUTY 1IN
Our Price: $2.47
C-CLAMP HEAVY DUTY 2IN
Our Price: $3.22
Heavy-duty durable malleable steel frame. Copper coated steel screw with swivel pad. Baked gray enamel finish. Larger handle on this c-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue; double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps; for woodworkers, carpenters, welders, builders or do-it-yourselfers; suitable for general clamping needs; larger swivel pad reduces marring on work surface and increases stability. Heavy-duty durable malleable steel frame. Copper coated steel screw with swivel pad. Baked gray enamel finish.
Quick Grip 225102 C-Clamp CLAMP C 1-1/2IN X 1-1/2IN     PADS REFILL SL 300
PADS REFILL SL 300
Our Price: $5.35
Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue. Larger handle on this c-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue; double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps; for woodworkers, carpenters, welders, builders or do-it-yourselfers; suitable for general clamping needs; larger swivel pad reduces marring on work surface and increases stability. Refill pads fit your existing SL300 bar clamp; replace damaged or worn-out pads in your Irwin tools; snap right on your clamp.
CLAMP/PIN UNIVERSAL PVC       CLAMP C 2-1/2IN X 1-3/8IN     ROD WELDING 1LB 1/8IN MILD STL
Clamp dust barrier to rod. Use pins to secure dust barrier to top foot. Double-rolled thread for faster clamping and increased durability; large swivel pad reduces marring on work surface and increases stability; large handle for greater clamping pressure with less effort. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
ROD WELDING AC/DC 3/32INCH 1LB Quick Grip 225103 C-Clamp HOOK MULTI-PRPS QK SUPPORT STL
E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue. Works with all TASK Quick Support Rods. Hardened steel. For hanging paint cans or other materials or tools.
C-CLAMP HEAVY DUTY 3IN        ROD WELDING 1LB 3/32IN MILDSTL ROD WELDING LOW H 3/32IN 1LB
C-CLAMP HEAVY DUTY 3IN
Our Price: $6.51
Heavy-duty durable malleable steel frame. Copper coated steel screw with swivel pad. Baked gray enamel finish. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz).
ROD WELDING LOW H 1/8INCH 1LB ROD WELDING AC/DC 1/8 INCH 1LB ROD/ELECTRD WELDING 3/32IN 1LB
E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160.
ROD/ELECTRD WELDING 1/8IN 1LB Irwin Quick Grip 53006 Micro Bar Clamp/Spreader Quick Grip 225123 C-Clamp
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. Positive locking action to hold work tight. For clamping small and odd shapes securely for home, craft or hobby work. Can also be used as spreaders. Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue.
C-CLAMP DEEP THROAT 2X3-1/2IN C-CLAMP HEAVY DUTY 4IN        PIPE CLAMP FIXTURE 1/2IN
C-CLAMP HEAVY DUTY 4IN
Our Price: $8.59
C-Clamp with malleable cast frame. Black oxide spindle and handle. Heavy duty swivel saddle. Throat depth 3-1/2". Heavy-duty durable malleable steel frame. Copper coated steel screw with swivel pad. Baked gray enamel finish. Strong malleable steel construction. Ideal for wood working and metal working applications. Spring lever control locks jaw at any needed location and provides quick release. Crank handle provides an excellent grip for quick tightening.
Quick Grip 225104 C-Clamp PAD GRIPPER 2-5/8IN X 8IN QSR ROD WELD GEN PURP 1LB 5/64IN
Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue. Made of rubber and steel. For wet or delicate surfaces with larger pad area. Pads can only be mounted at the top end of the quick support rod. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
Quick Grip 226200 Light Duty Corner Clamp C-CLAMP HEAVY DUTY 5IN        ELECTRODE STEEL 1LB 1/16IN
C-CLAMP HEAVY DUTY 5IN
Our Price: $11.72
Corner clamp is perfect for picture frames, and smaller projects. Heavy-duty durable malleable steel frame. Copper coated steel screw with swivel pad. Baked gray enamel finish. General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110.
C-CLAMP HEAVY DUTY 6IN        Quick Grip 225106 C-Clamp Irwin Quick Grip 546 Mini Bar Clamp
C-CLAMP HEAVY DUTY 6IN
Our Price: $12.44
Heavy-duty durable malleable steel frame. Copper coated steel screw with swivel pad. Baked gray enamel finish. Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue. Constructed of high-tech reinforced resin for strength and durability. These clamps are 25 percent smaller for working in confined spaces. Exerts up to 150 lbs. of clamping pressure. Pistol grip design enhances comfort and ease of use. Non marring pads grip firmly and protect work. Throat depth 2-7/16".
Irwin Quick Grip 5412 Mini Bar Clamp ROD BRAZING BRZ FLUX 3/32X18IN CLAMP C METAL 3-1/4X5IN
Constructed of high-tech reinforced resin for strength and durability. These clamps are 25 percent smaller for working in confined spaces. Exerts up to 150 lbs. of clamping pressure. Pistol grip design enhances comfort and ease of use. Non marring pads grip firmly and protect work. Throat depth 2-7/16". Formulated for high tensile strength and ductility. Smooth flowing. Excellent for most brazing uses. Flux coated for best cleaning action. Yellow color coded. Tensile Strength: 65,000 PSI. Melting Point: 1,598? F (870? C). Larger handle on this c-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue; double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps; for woodworkers, carpenters, welders, builders or do-it-yourselfers; suitable for general clamping needs; larger swivel pad reduces marring on work surface and increases stability.
RD SUPP 2-3/8X13-5/8IN RUBB   Irwin Quick Grip 223106 Clutch Lock Bar Clamp ROD AC LOW HYDROGEN 5/32IN 5LB
Made of EVA (Ethylene Vinyl Acetate) foam and steel. Protects textured or decorated surfaces. Pads can only be mounted at the top end of the quick support rod. Clutch Lock Steel Bar Clamp with soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat Depth 3 - 1/8". Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Diameter (Inches): 5/32" Weight Lbs. (Kg): 5 (2.26) Tensile Strength (PSI): 84,000 Amperage: 140-190
ROD WELD MILD STL 5/32IN 5LBS ROD WELDING 5LB 1/8IN MILD STL ROD/ELECTRD WELDING 1/8IN 5LB
General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160.
Trim Clip 003027 Corner Glue Clamp Quick Grip 224212 Pipe Clamp ROD WELD 7018 MILD 5/32IN 5LB
Corner clamps that helps achieve tight miter joints by providing strong pressure on the glue joints; unique 4-point cam system and positive lock; single hand operation. Made in USA. New clutch system eliminates the need for threaded pipe. Larger feet offer more stability and clearance between handle and worktop. Larger, more ergonomic handle.  Larger clutch plates allow for easier release and increased durability and dependability. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
ROD/ELECTRD WELDING 5LB 3/32IN ROD WELDING AC/DC 1/8 INCH 5LB ELECTRODE CAST IRON 1LB 1/8IN
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. Nomacast hard cast iron features a non-conductive coating; great for welding dirty, heat affected and oxidized cast iron; ideally suited to cladding contaminated casting prior to joining with high nickel alloys; non-machinable; RC 39 hardness.
ROD/ELECTRD WELDING 5/32IN 5LB Irwin Quick Grip 223112 Clutch Lock Bar Clamp ROD WELDING MILDSTL 5LB 3/32IN
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. Clutch Lock Steel Bar Clamp with soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat Depth 3 - 1/8". E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
Quick Grip 224134 Pipe Clamp ELCTRD F/AC WLDR 5LB          ELCTRODE 3/32IN 5LB F/SM WLDRS
New clutch system eliminates the need for threaded pipe. Larger feet offer more stability and clearance between handle and worktop. Larger, more ergonomic handle.  Larger clutch plates allow for easier release and increased durability and dependability. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
ROD EXTENSION QUICKSUPORT 18IN ROD WELDING LOW H 1/8INCH 5LB C-CLAMP HD SWIVEL TIP 8IN
C-CLAMP HD SWIVEL TIP 8IN
Our Price: $18.32
Extends any quick support rod by 18". E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). Heavy duty durable malleable steel frame. Copper coated steel screw with swivel pad. Baked gray enamel finish.
Irwin Quick Grip 223118 Clutch Lock Bar Clamp BAND CLAMP 1IN X 15FT         Irwin Quick Grip 223124 Clutch Lock Bar Clamp
BAND CLAMP 1IN X 15FT
Our Price: $19.37
Clutch Lock Steel Bar Clamp with soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat Depth 3 - 1/8". For use on large and irregular-shaped projects; the mechanical clamp parts are made of metal; the nylon band can hold up to 350 lbs. Clutch Lock Steel Bar Clamp with soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat Depth 3 - 1/8".
CLAMP C 100 SERIES METAL 4X8IN Irwin Quick Grip SL300 Bar Clamp/Spreader RD SUPP 2-3/8X27-1/2IN RUBB
Larger handle on this c-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue; double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps; for woodworkers, carpenters, welders, builders or do-it-yourselfers; suitable for general clamping needs; larger swivel pad reduces marring on work surface and increases stability. Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads. Made of EVA (Ethylene Vinyl Acetate) foam and steel. Protects textured or decorated surfaces. Pads can only be mounted at the top end of the quick support rod.
ROD WELDING DC ALUM 1/8IN .5LB Irwin Quick Grip 5462 Mini Bar Clamp CLAMP WOODEN HANDSCREW
CLAMP WOODEN HANDSCREW
Our Price: $22.81
E4043 DC aluminum "AluminArc" specialty welding electrodes are the highest strength alloy for arc and torch welding of low alloy aluminum. Excellent for cast, wrought and extruded aluminum in all positions. Can also be used as a torch brazing alloy. Typical applications include truck beds, loading ramps and docks, banisters, stairs, diamond plate, irrigation piping, engine blocks, transmission housings and railroad frogs. Recommended Polarity: DC Reverse. Weight Lbs. (Kg): .5 (.22). Amperage: 70-120. Constructed from high-tech resin material, they are strong, lightweight, and durable. Soft pads protect work surfaces. Positive locking action to hold work tight. Can be used with one hand. Ideal for clamping small and odd shapes securely. Applies gradual even pressure. Quick-release trigger lets go with a squeeze. Smaller, for tight work spaces. Throat depth 2-7/16". Two  No. 546 ( 693.4822) bar clamps included. Jaws adjust to any angle for clamping non-parallel surface and odd shapes; set up and remove quickly and easily; easy to adjust the angles of the jaws to fit odd-shaped work pieces; wooden clamps grip securely without marring work piece surfaces.
BAR CLAMP 36IN LIGHT DUTY     Irwin Quick Grip SL300 Bar Clamp/Spreader BAR CLAMP 36IN STEEL 100SERIES
BAR CLAMP 36IN LIGHT DUTY
Our Price: $23.05
Clutch lock provides easy movement along bar; the non-marring pads protect the work piece; Easy to use. Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads. Soft-grip handle is larger and more ergonomic, allowing high clamping pressure with less effort; I-beam bar reduces flexing and bowing; locking clamp is great for general workshop needs; clutch lock mechanism lets you quickly and easily adjust jaw with the touch of a button; larger clutch plates allow for easier release and increase durability and dependability.
Irwin Quick Grip 54122 Mini Bar Clamp ROD/ELCTRD WELDING 5/32IN 10LB STORAGE BAG QUICK SUPPORT ROD
Ideal for clamping or gluing, holding work for sawing or drilling and positioning work for fastening; 25 percent smaller for working in contained areas or small projects; constructed of high tech reinforced resin for strength and durability; exerts up to 150 lbs of clamping pressure; patented pistol grip design enhanced comfort and ease of use; non marring pads grip firmly and protect work; throat depth 2-7/16"; 2 clamps per card. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. Hand carrier storage bag for QSR rods and accessories. Inside zip pocket for smaller accessories. Made from nylon fabric (600D x 300D).
BAR CLAMP 30 INCH 100 SERIES  ROD WELD MILD STL 5/32IN 10LBS Irwin Quick Grip SL300 Bar Clamp/Spreader
Soft-grip handle is larger and more ergonomic, allowing high clamping pressure with less effort; I-beam bar reduces flexing and bowing; locking clamp is great for general workshop needs; clutch lock mechanism lets you quickly and easily adjust jaw with the touch of a button; larger clutch plates allow for easier release and increase durability and dependability. General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads.
WELDING ROD 1/8IN 7014 10LB   PIPE CLAMP 3/4IN DEEP THROAT  Irwin Quick Grip XP600 High Pressure Bar Clamp/Spreader
"High Deposition" is an iron powder-type electrode with medium to shallow penetration. It is known for smooth arc characteristics, good arc stability and low spatter. Excellent for sheet metal and ornmental iron work on poorly fitted joints. Use anywhere ease of operation and good appearance are required. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000; Amperage: 110-140. Larger feet offer more stability and clearance between handle and worktop; larger, more ergonomic handle offers easier clamping with reduced hand fatigue; larger clutch plates allow for easier release and increased durability and dependability. I-Beam bar resists twisting and bowing allowing maximum force to be applied. Patented 'Power Locks' hold more pressure, longer. Provides 550 lbs of one-handed force (900 lbs of two-handed force).'Quick Release' trigger for non-explosive pressure release. 'Quick-Change' jaw converts quickly into a spreader. 3" throat depth accommodates larger workpieces. 7-1/2" minimum spreading capacity. Non-marring pads grip securely and protect workpiece finish.
ROD WELDING MILDSTL 10LB 1/8IN RD WLDG 1/8IN MILD STL 10LB   ELCTRODE F/SM WLDRS 10LB 1/8IN
E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
RD WLDG 1/8IN MILD STL 10LB   ROD WELD 7018 MILD 5/32IN 10LB ELECTRODE STNLSS STL 1LB 1/8IN
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. Stainless steel Easy-All 312-16. Weld construction and pre-hardened tool steels and specialized iron-base castings w/high-carbon content. Mineral coated high-alloy steel that can be used by anyone - regardless of experience.
ROD WELDING LOW H 5/32IN 10LB Irwin Quick Grip SL300 Bar Clamp/Spreader ROD WELDING STEEL 1/8INCH 10LB
E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads. E6010 an all-purpose electrode used in all positions; a deep penetrating rod for carbon and galvanized steel; E6010 is for use with a DC welder and runs on DCEP; ideal for welding through light to medium amounts of dirt, rust or paint. Recommended Polarity: DCEP (Reverse Polarity). Tensile Strength (PSI): 80,000. Amperage: 35-125.
MOUNT CLAMPING UNIVERSAL QSR  Irwin Quick Grip XP600 High Pressure Bar Clamp/Spreader Quick Grip 226410 Angle Clamp
Rubberized clamping arms for added protection. Compatible with T43601 portable LED work light. Mounts laser levels, flood lights and camera tripod arms to a Quick Support Rod. Metal arm extends out 12" (30.5cm). Adjustable to several different angles. Can be set up and ready to use within seconds. Unique to the TASK QSR system. I-Beam bar resists twisting and bowing allowing maximum force to be applied. Patented 'Power Locks' hold more pressure, longer. Provides 550 lbs of one-handed force (900 lbs of two-handed force).'Quick Release' trigger for non-explosive pressure release. 'Quick-Change' jaw converts quickly into a spreader. 3" throat depth accommodates larger workpieces. 7-1/2" minimum spreading capacity. Non-marring pads grip securely and protect workpiece finish. Designed to hold materials up to 3" thick, at 90 degree angle.
BAR CLAMP 5.5X12IN SLIDING ARM Irwin Quick Grip XP600 High Pressure ROD SUPPORT SHORT 30X54IN
Soft-grip handle is larger and more ergonomic allowing high clamping pressure with less effort; I-beam bar reduces flexing and bowing; 35% greater throat capacity than clutch lock style. Throat Depth: 4-7/8". I-Beam bar resists twisting and bowing allowing maximum force to be applied. Patented 'Power Locks' hold more pressure, longer. Provides 550 lbs of one-handed force (900 lbs of two-handed force).'Quick Release' trigger for non-explosive pressure release. 'Quick-Change' jaw converts quickly into a spreader. 3" throat depth accommodates larger workpieces. 7-1/2" minimum spreading capacity. Non-marring pads grip securely and protect workpiece finish. EVA (Ethylene Vinyl Acetate) foam grip enables better hold on rod under wet working conditions. Built-in push-lock pin system. Tiltable rubber pads adjust to different applications.
Irwin Quick Grip SL300 Bar Clamp/Spreader Irwin Quick Grip XP600 High Pressure Bar Clamp/Spreader BAR CLAMP 5.5X24IN SLIDING ARM
Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads. I-Beam bar resists twisting and bowing allowing maximum force to be applied. Patented 'Power Locks' hold more pressure, longer. Provides 550 lbs of one-handed force (900 lbs of two-handed force).'Quick Release' trigger for non-explosive pressure release. 'Quick-Change' jaw converts quickly into a spreader. 3" throat depth accommodates larger workpieces. 7-1/2" minimum spreading capacity. Non-marring pads grip securely and protect workpiece finish. Soft-grip handle is larger and more ergonomic allowing high clamping pressure with less effort; I-beam bar reduces flexing and bowing; 35% greater throat capacity than clutch lock style. Throat Depth: 4-7/8".
ROD SUPPORT MEDIUM 63X120IN   CLAMP 3IN AUTOMAXX            Black & Decker BDCMTTS Matrix Trim Saw Attachment
CLAMP 3IN AUTOMAXX
Our Price: $41.13
EVA (Ethylene Vinyl Acetate) foam grip enables better hold on rod under wet working conditions. Built-in push-lock pin system. Tiltable rubber pads adjust to different applications. Adjusts automatically to match material thickness; easy-to-regulate pressure with a simple thumbscrew; large clamp faces spread pressure evenly; ergonomic padded grips prevent hand fatigue; compatible with the Kreg Clamp Table, Clamp Trak, Clamp Plate and the Universal Clamp Trak Kits. Powerful performance for use on plywood, paneling and fence boards. Lightweight, compact design for comfort and control. Spindle lock button that allows for single wrench bit changes. Rpm (12v Max). (1) 3-3/8'' Carbide blade - 24T. Cutting capacity - 90 degrees, cut 0.8267''.
BAR CLAMP 32IN PASSIVE LOCK   ROD SUPPORT LONG 81X159IN     CLAMP 6IN AUTOMAXX
CLAMP 6IN AUTOMAXX
Our Price: $46.55
Soft-grip handle is larger and more ergonomic allowing high clamping pressure with less effort; I-beam bar reduces flexing and bowing; 35% greater throat capacity than clutch lock style. Throat Depth: 4-7/8". EVA (Ethylene Vinyl Acetate) foam grip enables better hold on rod under wet working conditions. Built-in push-lock pin system. Tiltable rubber pads adjust to different applications. Adjusts automatically to match material thickness; easy-to-regulate pressure with a simple thumbscrew; large clamp faces spread pressure evenly; ergonomic padded grips prevent hand fatigue; compatible with the Kreg Clamp Table, Clamp Trak, Clamp Plate and the Universal Clamp Trak Kits.
CLAMP CORNER CAST ALUM 90DEG  CLAMP BENCH SYSTEM AUTOMAXX   SAW CIRCULAR 6-1/2IN LITH 20V
Works on 90? corners and "T" joints. 1 in. maximum capacity. Cast aluminum "V" and wedge clamp pads. Automaxx? auto-adjust technology. Easy-to-regulate clamping pressure with thumbwheel. Cutout allows driving a pocket-hole screw without removing clamp. Padded, ergonomic handles. Includes 3" (76mm) Bench Clamp, Clamp Plate and mounting hardware; anodized-aluminum plate mounts flush with work surface; clamp automatically adjusts to match material thickness; 3" reach (76mm); clamps materials up to 3-1/4" thick (95mm); clamp features an adjustment knob for built-in pressure control; extra-large padded clamp spreads clamping pressure evenly; ergonomic padded grips prevent hand fatigue; compatible with Kreg Clamp Trak and Clamp Vise. High performance motor delivers 4,000 rpm's for aggressive cutting. 6-1/2" carbide tooth blade delivers a 2-1/8" cutting capacity for a variety of cutting applications. Beveling shoe pivots up to 50 degrees for non-traditional cutting applications. Contoured over molded handle optimized for increased comfort. Weighs only 6.5 lbs which helps reduce jobsite fatigue. 20 volt max system cordless platform. Battery And Charger Sold Separately.
BENCH SYSTEM HD AUTOMAXX      SAW CIRCULAR LI-ON 20V 5-1/2IN ELECTRODE STEEL 40LB 1/8IN
BENCH SYSTEM HD AUTOMAXX
Our Price: $61.85
ELECTRODE STEEL 40LB 1/8IN
Our Price: $103.07
Portable 360? Clamping Station for Wood Projects; includes a 3" (76mm) Bench Clamp and a thick 10" x 10" (254mm x 254mm) steel plate; can be used on the go or mounted to a work surface; clamp automatically adjusts to match material thickness; 3" reach (76mm); clamps materials up to 3-3/4" thick (95mm); clamp features an adjustment knob for built-in pressure control; extra-large padded clamp spreads clamping pressure evenly; ergonomic padded grips prevent hand fatigue. Quickly cuts through 2x materials. Built-in laser cutting guide for accuracy and quick alignment. Battery holds its charge up to 18 months in storage. Specs: electric brake, 4,000 rpm, cutting depth: 90 degrees 1-9/16?, 45 degrees 1-1/8?, charging time: 3-5 hours. Includes: 5-1/2" 18T Carbide-tipped blade, rip guide, 2 volt Lithium-Ion battery, charger and blade wrench. General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110.
ELECTRODE STEEL 40LB 5/32IN   ELECTRODE STEEL 40LB 1/8IN    ELECTRODE STEEL 40LB 5/32IN
ELECTRODE STEEL 40LB 1/8IN
Our Price: $103.07
General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Diameter (Inches): 5/32" Weight Lbs. (Kg): 5 (2.26) Tensile Strength (PSI): 84,000 Amperage: 140-190 Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Diameter (Inches): 5/32" Weight Lbs. (Kg): 5 (2.26) Tensile Strength (PSI): 84,000 Amperage: 140-190
ELECTRODE STEEL 40LB 1/8IN    Dewalt DC390B Cordless Circular Saw Milwaukee 2630-20 M18 Cordless Circular Saws
ELECTRODE STEEL 40LB 1/8IN
Our Price: $103.07
E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilities welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). 1/8" Diameter,  22.7 Kg, 88,000 PSI tensile strength, 35-125 amperage. Fan cooled motor with replaceable brushes, carbide tipped blade for 2X cutting capacity at 90 degrees and 45 degrees, high strength magnesium shoe and upper guard. Specs: no load speed 3,700RPM, bevel capacity 0-50 degrees, 5/8" arbor, depth of cut at: 45 degrees 1- 5/8", 90 degrees 2-1/4", weighs 6.3 lbs. Includes: carbide tipped blade, blade wrench, tool only (batteries and charger sold separately). Heavy duty magnesium blade guard for maximum durability. Ergonomic, compact and lightweight design with soft grip handle for operator comfort. Max bevel capacity 50 degrees. Electronic brake stops blade quickly. Aircraft aluminum shoe provides greater accuracy. 1 hour charge time. Easy to read Aluminum aircraft shoe provides a light weight durable shoe and greater accuracy in rip cuts. 5/8" arbor size. Weighs only 8.5 lbs. Provides powerful lightweight cutting for a variety of applications including plumbing, electrical, framing, finishing and carpentry. Quickly and easily cuts tough material such as LVL headers. Includes: (1) M18 Cordless Lithium-Ion 6-1/2" Circular saw and (1) Circular saw blade.
Makita BSS611Z Tool Only Cordless Circular Saw Dewalt DCS391B Tool Only Cordless Circular Saw Jawhorse RK9003 Foldable Work Station With Improved Latches
Tool only. Heavy gauge, precision machined base for smooth, accurate cutting and added durability. Soft grip handle. Specs: 5/8" arbor, 3,700 RPM, Max cutting depth at: 90-degrees- 2-1/4", 45-degrees- 1-9/16" and 50-degrees- 1-7/16", uses 18V LXT lithium-ion battery (battery and charger not included) and weighs 7.3 lbs. High strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy. Optimized rubber overmolded comfort grip delivers optimal balance and control. Specs: 3,700 rpm, 50-degree bevel capacity, 5/8" arbor size, 1-5/8" depth of cut at 45-degree, 2-1/4" depth of cut at 90-degree and weighs 7 lbs. Includes tool only with 6-1/2" carbide-tipped blade. Clamping portable workstation; 37" clamping capacity with 2,200 lbs. of clamping force; foot operated clamping allows for both hands to control and position the work piece; 600 lbs. load capacity; all steel construction; tripod base for all-terrain stability; front roller for easy transport; folds quickly for compact transport and storage; stirrup feet allow for added stability.
SAW CIRCULAR W/6-1/2 BLADE 18V SAW CIRC W/7-1/4 BLADE 18V    SAW CIRCULAR 60V MAX 7-1/4IN
SAW CIRC W/7-1/4 BLADE 18V
Our Price: $199.98
12V handling with 18V performance, and compatibility with the world?s largest 18V cordless tool system. This saw is engineered for cutting and ripping applications, and is ideal for any contractor seeking a more compact cutting solution for framing, roofing, formwork, and more. The 6-1/2" Circular Saw has a compact and ergonomic design at only 10-5/8" and 6.4 lbs. Makita-built brushless motor delivers up to 5,000 RPM and a superior power-to-weight ratio. The saw is equipped with Makita?s Automatic Speed Change technology, which adjusts cutting speed and torque under load for optimum cutting performance. Dual LED lights, electric brake, built-in tether notch (tether sold separately), and Extreme Protection Technology (XPT) for improved dust and water resistance in harsh job site conditions. For improved dust extraction, the rear dust port easily connects to a vacuum system (dust extraction accessories sold separately). Includes: (1) 18V LXT Lithium-Ion Sub-Compact Brushless, (1) 6-1/2" 24T C.T. Saw Blade (A-85092), (1) dust extracting attachment (199230-9) and (1) hex wrench. The electronically-controlled brushless motor delivers a full 6,000 RPM for efficient cutting, with Makita?s Automatic Speed Change technology, which adjusts cutting speed and torque under load for optimum cutting performance. Dual LED lights, electric brake, built-in tether notch (tether sold separately), and Extreme Protection Technology (XPT) for improved dust and water resistance in harsh job site conditions. Includes: (1) 18V X2 LXT Brushless Circular Saw, (1) 7-1/4" 24T ultra-coated saw blade, (1) hex wrench, and (1) dust extracting attachment (battery and charger sold separately). Delivers the power of a corded saw with the portability and convenience of cordless through Dewalt's revolutionary FlexVolt technology. Delivers up to 339 cuts per charge in 2" x 4' SPF lumber. Electronic brake stops the blade after the trigger is released. 2-9/16" depth of cut. Brushless motor maximized for run time and durability. 5800 rpm optimized speed for quality cuts with speed. 7-1/4" blade diameter. Includes the Circular Saw, blade and blade change wrench. (Battery, Charger And 120 Volt Adapter Not Included).
SAW CIRC BRUSHLESS 20V 7-1/4IN SAW KIT BRSHLS CIRC 7-1/4IN   SAW CIRC 60V BRSHLS 7-1/4 1BAT
7-1/4" (184mm) 20 volt circular saw with brake kit provides the power and depth of cut delivered by corded circular saws with the portability and convenience of cordless. Brushless motor provides 5500 rpm and maintains speed under load. Blade provides 2-9/16" depth of cut. Run-time: 330 cross cuts in a 2x4 (pine). Kit includes: 7-1/4" (184mm) circular saw, (1) 7-1/4" blade, (1) blade changing wrench, (1) 20 volt Lithium Ion battery and (1) 12 volt Max 20 volt Max Lithium Ion battery charger. Delivers up to 40 percent more power than circular saws with brushed motors, while providing up to 30 percent more run-time. REDLINK electronics and REDLITHIUM XC5.0 battery provide more efficient power delivery, more power and fewer trips to the charger. The saw features an integrated rafter hook, magnesium guards, an aluminum shoe and LED light. Specs: 5,000 RPM, 7-1/4" blade size, 2-1/2" cut depth at 90 degrees, 1-7/8" cut depth at 45 degrees, 50 degrees max bevel, 7.5 lbs weight. Includes: (1) 18 volt M18 Brushless 7-1/4" Circular Saw Kit, (1) M18 Red Lithium extended capacity battery pack, (1) M18 & M12 multi-voltage charger, (1) blade, (1) blade wrench and (1) bag. 15 Amp circular saw with brake is maximized for run-time and durability. It delivers the power and cut capacity of a corded circular saw with the portability and convenience of a cordless saw. Delivers up to 339 cuts per charge in 2" x 4" SPF lumber. Depth of cut 2-9/16". The electronic brake stops the blade after the trigger is released. 5800 rpm. The saw weighs 7.6 lbs.  Includes: (1) DCS575 7-1/4" (184mm) Circular saw, (1) 60 volt Max Lithium Ion battery pack, (1) Fast Charger, (1) Dewalt 7-1/4" (184mm) diameter blade and (1) Blade wrench and bag.
SAW CIRC KIT W/6-1/2 BLADE 18V Milwaukee 2730-21 M 18 Fuel Circular Saw Kit SAW CIRCULAR KIT REAR-HNDL 36V
Powerful Makita built electronically controlled BL motor delivers 5,000 RPM for faster cutting and ripping. Dual LED lights illuminate the work area. Electric brake for maximum productivity. Built-in dust blower cleans the line of cut for operator accuracy. Specs: Large cutting capacity (2-1/4? at 90 degrees) and bevel capacity (0-50 degrees), 10-5/8" tool length and 6.4 lbs. weight (with battery). Kit Includes: Circular Saw, 6-1/2 24T Saw Blade, (2) 18 volt Lithium-Ion batteries, 18 volt Lithium-Ion rapid charger, Dust Extracting Attachment, Hex wrench, and tool bag. The saw's Redlink Plus intelligence ensures optimized performance and protection from overloading, overheating and over-discharging. The 18 v lithium Ion circular saw's guards and shoe are built of cast magnesium to provide a durable, lightweight base. The saw also features an integrated LED light and a rafter hook for convenient storage on the job. Weighs only 8 lbs. 5,000 rpm.  5/8" arbor size. 50 degrees max bevel capacity. The kit includes (1) M18 Fuel 6-1/2" circular saw, (1) M18 Redlithium XC 4.0 extended capacity battery pack, (1) M18 & M12 multi-voltage charger, (1) blade, (1) blade wrench and (1) contractor bag. Features the blade-left and rear-handle design. The electronically-controlled brushless motor delivers a full 5,100 RPM for efficient cutting. In internal testing, the XSR01PT made up to 558 cross-cuts per charge in 2x4 SPF lumber using two fully-charged 5.0Ah batteries. Large 2-9/16" cutting capacity at 90 degrees will cut 3X lumber in a single pass, and an electric brake for maximum productivity. Die-cast magnesium base and blade guard with die-cast aluminum blade cover and motor housing. Specs: 0-53 degrees bevel capacity with positive stops at 22.5, 45, and 53 degrees, 5,100 no load RPM, 17-1/2" length, and 24.2 lbs. weight. Kit Includes: 18 volt Brushless Rear Handle 7-1/4 Circular Saw, 18 volt Lithium-Ion battery, 18 volt dual port charger, 7-14" saw blade, wrench, and tool bag.
SAW CIRC KIT W/7-1/4 BLADE 18V SAW CIRC 60V BRSHLS 7-1/4 2BAT SAW KIT CIRCULAR 7-1/4IN
SAW KIT CIRCULAR 7-1/4IN
Our Price: $461.48
Delivers 6,000 RPM. Brushless motor matches torque and RPM to the application. Makita 18V X2 means freedom from the cord, even for demanding applications like cutting sheet and dimensional lumber that traditionally called for a corded saw. Best of all, users can remain in one battery platform, using the same fast-charging 18V batteries with the XSH06PT as used across the expansive Makita 18V LXT cordless tool system. Includes: (1) 18V X2 LXT (36V) Brushless Circular Saw (XSH06Z), (1) 7-1/4" 24T C.T. Circular Saw Blade (B-61656), (2)18V LXT Lithium-Ion 5.0Ah Batteries (BL1850B), 18V LXT Lithium-Ion Dual Port Charger (DC18RD), (1) hex wrench, dust extracting attachment, and bag. 15 Amp, brushless motor circular saw with brake delivers the power and cut capacity of a corded circular saw with the power and convenience of a cordless saw. Delivers up to 339 cuts per charge in 2" x 4" pine. Depth of cut 1-5/8". The electronic brake stops the blade after the trigger is released. 5800 rpm. The saw weighs 7.6 lbs.  Includes: (1) DCS575 7-1/4" (184mm) Circular saw, (2) 60 volt Max Lithium Ion battery packs, (1) Fast Charger, (1) 7-1/4" (184mm) diameter blade and (1) Blade wrench and bag. Designed for the carpenter, remodeler and general contractor. The M18 FUEL 7-1/4" Circular Saw cuts faster than a 15A corded saw and gives users up to 750 cuts per charge. The POWERSTATE brushless motor provides 5,800 RPM and higher speeds under load for corded cutting performance. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 Red Lithium high output battery delivers unmatched run-time in all applications. All magnesium guards and shoe delivers extreme durability for jobsite conditions. A built-in rafter hook offers quick and easy storage and an electric brake stops the blade quickly after cuts are complete for maximum productivity. Includes: (1) M18 FUEL 7-1/4" Circular Saw, (1) M18 Red Lithium high output battery pack (1) M18 & M12 rapid charger, (1) blade, (1) blade wrench and (1) bag.
SAW HAND HELD ELECTRIC 15AMP  Makita EK7301 Power Cutter Diamond Products 3853 Cut-Off Saw
For wet or dry cutting. Overload protection with load warning LED light. Features detachable guide rollers, splash guard to protect from water spray and lightweight magnesium blade guard. Handles are designed for optimal control. Standard water feed system with fine adjustable flow, quick release coupling and durable hose. Specs: 4500 RPM, Blade size 14", arbor 1", voltage 120V. Five-stage, foam-paper-nylon system with advanced directional air flow provides very clean air for better saw performance. Reinforced aluminum blade guard with 70 degree range of limitless positioning using a marked knob handle. Improved ignition system with larger flywheel and rare earth magnets for more power. Specs: engine displacement (cu.in.) 4.5, 5.7  max. power (hp), 9,350 no load rpm, 50:1 fuel mixture with 37 oz. fuel tank capacity, 4,300 max. spindle speed, 14" wheel diameter, 20 mm arbor, max. cutting depth is 4-13/16", weight 22 lbs. Includes: 14" abrasive wheel, universal wrench, torx, screwdriver, adapter ring (20mm to 1"). With SLR technology for a cleaner running enging. Light weight and balanced with a 5-stage filtration system, smooth start decompression valve, adjustable blade guard, standard garden hose quick disconnect, titanium coated pull rope, sure-grip rubber coated handles. Weighs 21.38 lbs. Includes: tool kit and (4) bottle of ultra-extend synthetic oil. Makes 1 gallon at 50:1 ratio. Saw blade Not Included.
   
 
1