Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > CLAMPS & VISES > C-CLAMPS
Sort By:
1
C-CLAMP HEAVY DUTY 1IN        C-CLAMP 1IN 100SERIES         C-CLAMP HEAVY DUTY 2IN
C-CLAMP HEAVY DUTY 1IN
Our Price: $2.47
C-CLAMP HEAVY DUTY 2IN
Our Price: $3.22
Heavy-duty durable malleable steel frame. Copper coated steel screw with swivel pad. Baked gray enamel finish. Larger handle on this c-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue; double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps; for woodworkers, carpenters, welders, builders or do-it-yourselfers; suitable for general clamping needs; larger swivel pad reduces marring on work surface and increases stability. Heavy-duty durable malleable steel frame. Copper coated steel screw with swivel pad. Baked gray enamel finish.
Quick Grip 225102 C-Clamp CLAMP C 1-1/2IN X 1-1/2IN     Tool Works 1152 Full Round Bucket Tray
Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue. Larger handle on this c-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue; double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps; for woodworkers, carpenters, welders, builders or do-it-yourselfers; suitable for general clamping needs; larger swivel pad reduces marring on work surface and increases stability. Unique ``Pop-Up" carrying handle, stack or nest trays inside standard. 2-1/2"H. Stack or nest trays inside a standard 3-1/2 to 5 gallon bucket.
PADS REFILL SL 300            Fulton 400SHB Light Duty Saw Horse Bracket CLAMP C 2-1/2IN X 1-3/8IN
PADS REFILL SL 300
Our Price: $5.35
Refill pads fit your existing SL300 bar clamp; replace damaged or worn-out pads in your Irwin tools; snap right on your clamp. All steel construction. Riveted bracket for added strength and flared nail holes for fast take-down. Four nail holes on top double holding power - to prevent separation from rail. Black enamel finish. Double-rolled thread for faster clamping and increased durability; large swivel pad reduces marring on work surface and increases stability; large handle for greater clamping pressure with less effort.
Quick Grip 225103 C-Clamp C-CLAMP HEAVY DUTY 3IN        Fulton 300SHB Saw Horse Bracket
C-CLAMP HEAVY DUTY 3IN
Our Price: $6.51
Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue. Heavy-duty durable malleable steel frame. Copper coated steel screw with swivel pad. Baked gray enamel finish. All steel construction. Riveted bracket for added structural strength and featuring flared nail holes for quick and easy disassembling. For use with standard 2x4's. Black enamel finish.
Irwin Quick Grip 53006 Micro Bar Clamp/Spreader Quick Grip 225123 C-Clamp GLOVE WELDING UNLND LEATHER LG
Positive locking action to hold work tight. For clamping small and odd shapes securely for home, craft or hobby work. Can also be used as spreaders. Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue. Split leather palm and back. 4" safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. "Forney" imprint on glove.
C-CLAMP HEAVY DUTY 4IN        PIPE CLAMP FIXTURE 1/2IN      Quick Grip 225104 C-Clamp
C-CLAMP HEAVY DUTY 4IN
Our Price: $8.59
Heavy-duty durable malleable steel frame. Copper coated steel screw with swivel pad. Baked gray enamel finish. Strong malleable steel construction. Ideal for wood working and metal working applications. Spring lever control locks jaw at any needed location and provides quick release. Crank handle provides an excellent grip for quick tightening. Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue.
WLDG GLV LTHR HVYD L          GLOVE WELDING BLK MENS LARGE  GLOVE WELDING GREY X-LARGE
Split leather palm and back. Extended gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove. "Forney" imprint on glove. Split Leather palm and back. Extended Gauntlet safety cuff offers extra wrist and forearm protection. Fortified with heat resistant Kevlar thread for added durability and wear. Cotton fleece lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove. Forney?s emblem imprint on glove. Extended gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength. Forney imprint on glove.
C-CLAMP HEAVY DUTY 6IN        GLOVE WELD LEATHER LARGE BROWN GLOVE WELDING BROWN MEN XLRG
C-CLAMP HEAVY DUTY 6IN
Our Price: $12.44
Heavy-duty durable malleable steel frame. Copper coated steel screw with swivel pad. Baked gray enamel finish. Split leather palm and back. Extended gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove. "Forney" imprint on glove. Extended Gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove. Forney?s emblem imprint on glove.
Quick Grip 225106 C-Clamp Irwin Quick Grip 546 Mini Bar Clamp Irwin Quick Grip 5412 Mini Bar Clamp
Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue. Constructed of high-tech reinforced resin for strength and durability. These clamps are 25 percent smaller for working in confined spaces. Exerts up to 150 lbs. of clamping pressure. Pistol grip design enhances comfort and ease of use. Non marring pads grip firmly and protect work. Throat depth 2-7/16". Constructed of high-tech reinforced resin for strength and durability. These clamps are 25 percent smaller for working in confined spaces. Exerts up to 150 lbs. of clamping pressure. Pistol grip design enhances comfort and ease of use. Non marring pads grip firmly and protect work. Throat depth 2-7/16".
CLAMP C METAL 3-1/4X5IN       CLC 1119 Bucket Tool Organizer Irwin Quick Grip 223106 Clutch Lock Bar Clamp
Larger handle on this c-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue; double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps; for woodworkers, carpenters, welders, builders or do-it-yourselfers; suitable for general clamping needs; larger swivel pad reduces marring on work surface and increases stability. Organize a wide range of tools and accessories, 14 double row pockets inside, 34 triple row outside. Security pocket with hook, loop closure. Drill pocket. Clutch Lock Steel Bar Clamp with soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat Depth 3 - 1/8".
Quick Grip 224212 Pipe Clamp Irwin Quick Grip 223112 Clutch Lock Bar Clamp GLOVES WELDING HD BLUE MENS LR
New clutch system eliminates the need for threaded pipe. Larger feet offer more stability and clearance between handle and worktop. Larger, more ergonomic handle.  Larger clutch plates allow for easier release and increased durability and dependability. Clutch Lock Steel Bar Clamp with soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat Depth 3 - 1/8". Premium side-split leather palm and back. Heat and abrasion resistant reinforced patches in key strategic areas for added protection. Extended Gauntlet safety cuff offers extra wrist and forearm protection. Fortified with heat resistant Kevlar thread for added durability and wear. Cotton foam lining for moisture absorption and heat protection. Self-hemmed welting in seams to provide extra strength to seams adding durability and strength. Forney?s emblem imprint on glove.
GLOVES WELDING HD BLUE MENS XL BAG PARACHUTE 19POCKT 10X6.5IN Quick Grip 224134 Pipe Clamp
Premium side-split leather palm and back. Heat and abrasion resistant reinforced patches in key strategic areas for added protection. Extended Gauntlet safety cuff offers extra wrist and forearm protection. Fortified with heat resistant Kevlar thread for added durability and wear. Cotton foam lining for moisture absorption and heat protection. Self-hemmed welting in seams to provide extra strength to seams adding durability and strength. Forney?s emblem imprint on glove. 12 oz. Duckwear canvas dividers for easy compression of pockets; reinforced poly ripstop pockets and bottom; 19 pockets: 13 exterior, 6 interior; you can stack 3-4 of the parachute bags into a 5 gallon bucket; rip cord closure. Size: 10" D, 6.5" H. New clutch system eliminates the need for threaded pipe. Larger feet offer more stability and clearance between handle and worktop. Larger, more ergonomic handle.  Larger clutch plates allow for easier release and increased durability and dependability.
Hopkins Pro Bracket Sawhorse Irwin Quick Grip 223118 Clutch Lock Bar Clamp ORGANIZER BUCKET TOOL
ORGANIZER BUCKET TOOL
Our Price: $19.70
Only straight, 90 degree angled cuts are required; no miters or angles; add 2x4's to the '2x4basic' ProBrackets sawhorse to make a pair of versatile sawhorses in any length, width or height; lower shelf for extra storage; a pair of ProBrackets will hold up to 2000 pounds (900kg); package includes a pair (2) ProBrackets sawhorses, stabilizing feet and all hardware. Clutch Lock Steel Bar Clamp with soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat Depth 3 - 1/8". Made of 600 poly ripstop fabric. Fits most 5 gallon buckets. 3 interior loops for hammers, drills, pry bars and other long tools. Inside is left open for remaining tools.
Fulton 100SHB Saw Horse Bracket Irwin Quick Grip 223124 Clutch Lock Bar Clamp CLAMP C 100 SERIES METAL 4X8IN
Constructed of heavy gauge steel. No nails, screws, bolts or miter cuts on legs required. For use with standard 2x4's. Wingnut locks legs and rail firmly in place. Clutch Lock Steel Bar Clamp with soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat Depth 3 - 1/8". Larger handle on this c-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue; double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps; for woodworkers, carpenters, welders, builders or do-it-yourselfers; suitable for general clamping needs; larger swivel pad reduces marring on work surface and increases stability.
Fulton TS-11 Portable Lightweight Folding Sawhorse Irwin Quick Grip SL300 Bar Clamp/Spreader Irwin Quick Grip 5462 Mini Bar Clamp
Supports up to 1,000 pounds. Rust resistant galvanized steel. Folds easily for storage. Locking legs to support big jobs. Open Size: 32-1/2"L x 29-1/4"H. Collapsed size: 6" x 8" x 31-1/2". Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads. Constructed from high-tech resin material, they are strong, lightweight, and durable. Soft pads protect work surfaces. Positive locking action to hold work tight. Can be used with one hand. Ideal for clamping small and odd shapes securely. Applies gradual even pressure. Quick-release trigger lets go with a squeeze. Smaller, for tight work spaces. Throat depth 2-7/16". Two  No. 546 ( 693.4822) bar clamps included.
BAR CLAMP 36IN LIGHT DUTY     Irwin Quick Grip SL300 Bar Clamp/Spreader BAR CLAMP 36IN STEEL 100SERIES
BAR CLAMP 36IN LIGHT DUTY
Our Price: $23.05
Clutch lock provides easy movement along bar; the non-marring pads protect the work piece; Easy to use. Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads. Soft-grip handle is larger and more ergonomic, allowing high clamping pressure with less effort; I-beam bar reduces flexing and bowing; locking clamp is great for general workshop needs; clutch lock mechanism lets you quickly and easily adjust jaw with the touch of a button; larger clutch plates allow for easier release and increase durability and dependability.
Irwin Quick Grip 54122 Mini Bar Clamp CLC 4122 Bucket Tool Organizer BAR CLAMP 30 INCH 100 SERIES
Ideal for clamping or gluing, holding work for sawing or drilling and positioning work for fastening; 25 percent smaller for working in contained areas or small projects; constructed of high tech reinforced resin for strength and durability; exerts up to 150 lbs of clamping pressure; patented pistol grip design enhanced comfort and ease of use; non marring pads grip firmly and protect work; throat depth 2-7/16"; 2 clamps per card. Made of durable rugged, polyester fabric. 36 triple row outside pockets, 25 double row inside pockets. Drill holder with side release buckle security strap. Designed to fit most standard 3-1/2 to 5 gallon buckets. Soft-grip handle is larger and more ergonomic, allowing high clamping pressure with less effort; I-beam bar reduces flexing and bowing; locking clamp is great for general workshop needs; clutch lock mechanism lets you quickly and easily adjust jaw with the touch of a button; larger clutch plates allow for easier release and increase durability and dependability.
Irwin Quick Grip SL300 Bar Clamp/Spreader PIPE CLAMP 3/4IN DEEP THROAT  Irwin Quick Grip XP600 High Pressure Bar Clamp/Spreader
Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads. Larger feet offer more stability and clearance between handle and worktop; larger, more ergonomic handle offers easier clamping with reduced hand fatigue; larger clutch plates allow for easier release and increased durability and dependability. I-Beam bar resists twisting and bowing allowing maximum force to be applied. Patented 'Power Locks' hold more pressure, longer. Provides 550 lbs of one-handed force (900 lbs of two-handed force).'Quick Release' trigger for non-explosive pressure release. 'Quick-Change' jaw converts quickly into a spreader. 3" throat depth accommodates larger workpieces. 7-1/2" minimum spreading capacity. Non-marring pads grip securely and protect workpiece finish.
M-D 27094 Folding Sawhorse Irwin Quick Grip SL300 Bar Clamp/Spreader GLOVES WELDING MENS X-LARGE
M-D Folding Sawhorse, Heavy Duty, Steel, M-D, 1500 lb Load Capacity, 28-1/2 in Height, 31 in Width, Galvanized Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads. Full grain palm and back. Heat and abrasion resistant reinforced patches in key strategic areas for added protection. 5" split leather reinforced safety cuff offers extra wrist and forearm protection. Fortified with heat resistant Kevlar thread for added durability and wear. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove.  Forney?s emblem imprint on glove.
Irwin Quick Grip XP600 High Pressure Bar Clamp/Spreader BAR CLAMP 5.5X12IN SLIDING ARM GLOVE WELDING MENS LEATHER LRG
I-Beam bar resists twisting and bowing allowing maximum force to be applied. Patented 'Power Locks' hold more pressure, longer. Provides 550 lbs of one-handed force (900 lbs of two-handed force).'Quick Release' trigger for non-explosive pressure release. 'Quick-Change' jaw converts quickly into a spreader. 3" throat depth accommodates larger workpieces. 7-1/2" minimum spreading capacity. Non-marring pads grip securely and protect workpiece finish. Soft-grip handle is larger and more ergonomic allowing high clamping pressure with less effort; I-beam bar reduces flexing and bowing; 35% greater throat capacity than clutch lock style. Throat Depth: 4-7/8". Premium grade full grain palm and back; heat and abrasion resistant reinforced patches in key strategic areas for added protection; 5" split leather reinforced safety cuff offers extra wrist and forearm protection; fortified with heat resistant Kevlar thread for added durability and wear; self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove; "Forney" embossed on glove.
FatMax STST60952 Twin Pack Folding Saw Horse Irwin Quick Grip XP600 High Pressure North American Tool 52229 2-Piece Folding Sawhorse
Holds 800 pounds per pair; lightweight, easy to transport; integral V-groove; tray opens up to hold your tools. I-Beam bar resists twisting and bowing allowing maximum force to be applied. Patented 'Power Locks' hold more pressure, longer. Provides 550 lbs of one-handed force (900 lbs of two-handed force).'Quick Release' trigger for non-explosive pressure release. 'Quick-Change' jaw converts quickly into a spreader. 3" throat depth accommodates larger workpieces. 7-1/2" minimum spreading capacity. Non-marring pads grip securely and protect workpiece finish. Holds up to 500 lbs (Total weight when using BOTH sawhorses); non-slip feet; flip-up edge guides; non-slip rests; fold to less than 2" for easy storage. Dimensions: H-33.07" x L-23.03" x W-16.14".
Irwin Quick Grip SL300 Bar Clamp/Spreader Irwin Quick Grip XP600 High Pressure Bar Clamp/Spreader FatMax 060864R Twin Pack Folding Saw Horse
Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads. I-Beam bar resists twisting and bowing allowing maximum force to be applied. Patented 'Power Locks' hold more pressure, longer. Provides 550 lbs of one-handed force (900 lbs of two-handed force).'Quick Release' trigger for non-explosive pressure release. 'Quick-Change' jaw converts quickly into a spreader. 3" throat depth accommodates larger workpieces. 7-1/2" minimum spreading capacity. Non-marring pads grip securely and protect workpiece finish. Holds 1000 lbs per pair; light weight - easy to transport; integral V groove and tray opens up to hold your tools.
Lenox 1787473 Bucket Tool Organizer FatMax STST11151 Single Fold Up Saw Horse BAR CLAMP 5.5X24IN SLIDING ARM
22 exterior pockets, 12 interior pockets, hammer loop, tape holder loop, padded shoulder strap, side clips secure the organizer and reflective material. Easy to fold-up and carry with one hand; plastic sawhorse with metal legs; capacity load of 750lbs (340 kg) per pair of sawhorses. Dimensions: 12-12" H x 101" L x 75" W. Soft-grip handle is larger and more ergonomic allowing high clamping pressure with less effort; I-beam bar reduces flexing and bowing; 35% greater throat capacity than clutch lock style. Throat Depth: 4-7/8".
Black & Decker BDCMTI Matrix Cordless Impact Driver Attachment CIRCULAR SAW 13AMP CORDED     FatMax 011031S Adjustable Folding Saw Horse
Ideal for driving screws,large fasteners such as lag bolts, decking and drilling/driving in tight areas. Impact attachment fits 20 volt Black & Decker cordless drill (Orgill sku 983.7014). The 13 amp 7-1/4" circular saw with laser cut line guide has the power you need to tackle tough jobs. The laser cut line guide provides you with added confidence to make clean and accurate cuts. This circular saw is also equipped with a convenient spindle lock, allowing for easy blade changes. Easy bevel adjustment allows for accurate 0-45 degree angled cuts. Depth adjust to 2.5" at 90 degrees. Lightweight design for enhanced control. 0-5,300 rpm. Includes Circular saw blade and wrench. Each leg adjusts separately, allowing the sawhorse to stand on uneven surfaces; rubber inserts for stability; high-quality, sturdy polypropylene and steel legs; unique slide mechanism, providing for easy, smooth adjustment.
BAR CLAMP 32IN PASSIVE LOCK   Vulcan YH-SH017 Sawhorses SAW CIRCULAR 13A 7-1/4IN
SAW CIRCULAR 13A 7-1/4IN
Our Price: $45.01
Soft-grip handle is larger and more ergonomic allowing high clamping pressure with less effort; I-beam bar reduces flexing and bowing; 35% greater throat capacity than clutch lock style. Throat Depth: 4-7/8". Adjustable leg folding sawhorse with five variable height adjustments. Yellow powder coating finish. Work surface thickness 0.079" (2mm) 14 gauge, leg thickness 0.067" (1.7mm) 15 gauge. Open range size, 38-1/4" W x 25-1/2", 40" H, folding size, 38-1/4" L x4'' W x 2-3/4" H, load capacity, 1200 Lbs, steel carrying handle. Powerful 13 amp motor. Spindle lock for easy blade changes. Comfort rubber insert in "D" handle. Externally replaceable brushes. Specs: 5,500 RPM no-load speed, Cutting Depth: 90 degrees - 2-7/16" and 45 degrees - 1-13/16", 832 lbs. weight. Includes: 24T Carbide-tipped Blade, Rip Guide, and Blade Wrench.
SAW CIRCULAR 14A 7-1/4IN      DRIVER IMPACT 12V LITHIUM-ION CIRCULAR SAW 7-1/4 INCH
Upgraded 14 amp motor for longer saw life. Spindle lock makes blade changes a breeze. 51? Bevel with Positive Stop at 45? for added cutting capacity. 2 point line of sight cuts straight lines with ease. Improved dust blower keeps line of cut free of sawdust. Power-On indicator for powered tool alert. Lighter weight design for less user fatigue. On-tool wrench storage for quick and easy blade changes. Safety Lock/Guarded trigger minimizes accidental starts. Anti-Snag Lower Guard reduces snags when making narrow cut-offs. Rear Lever Depth Adjustment quickly assures desired cut depth. Includes: (1) 5180 Circular Saw, (1) 20-tooth Carbide Blade and (1) Blade Wrench. 708 in-lbs of torque. Torque transfers to the work, not the user. 1/4" hex quick-change locking collet. More power and double the run time of Ni-Cad drivers. Battery holds its charge up to 18 months in storage. Built-in LED work light. Metal belt clip. Electric brake. 12 volt DC motor input. No load speed:0-2,300 rpm, reversible. Charger input: 120v - 60 Hz, with a charging time of 3-5 hrs. Includes (1) battery, charger and (1) #2 Phillips screwdriver bit. 7-1/4" Circular saw with 12 amp motor and 5,500 rpm. 2-1/2" cut capacity at 90?; 1-49/64" at 45?. Spindle lock for easy blade change. 10' cord to allow most uses without an extension cord. Lightweight at only 8.8 lbs. Includes 7-1/4" carbide tipped blade, arbor wrench and rip fence.
SAW CIRCULAR 7-1/4IN 15A STEEL SAW CIRCULAR COMPACT 4.5INCH  SAW CIRCULAR 7-1/4IN
15 amp motor running at 5,500 rpm provides power and speed through applications. Steel shoe, along with metal upper and lower guards that provide added durability. It offers spindle lock and depth adjustment and a 45 degree max bevel adjust to provide ease of use. An Aux handle provides comfort and clear line of sight. At only 9.5 lbs this unit is convenient to use. Includes Circular Saw, 7-1/4" 18 tooth carbide tipped blade and Allen wrench. Compact saw with a maximum cutting depth of 46mm. Powerful 4 amp motor cuts through a variety of materials with ease. Bevel adjustment for special work conditions. Designed for easy one-handed operation. Quick cutting depth adjustment for easy setting depth. Spindle lock button for easy blade changes. Dust extraction facility with built-in dust port. 3700/min no load speed. Blade size: 120 mm. 45 degree bevel capacity. Upgraded 15 amp motor for longer saw life. Single beam laser for accurate cuts. Spindle lock makes blade changes a breeze. 51? Bevel with Positive Stop at 45? for added cutting capacity. Improved dust blower keeps line of cut free of sawdust. Power-On indicator for powered tool alert. Carry bag for convenient portability and storage. On-tool wrench storage for quick and easy blade changes. Safety Lock/Guarded trigger minimizes accidental starts. Anti-Snag Lower Guard reduces snags when making narrow cut-offs. Rear View Depth Adjustment for clear visibility and quick cut-depth changes. Ball Bearing Motor Construction for twice the life compared to the previous model. Includes: (1) 5280 Circular Saw, (1) 24-tooth Carbide Blade, (1) Blade Wrench and a carrying bag.
FatMax STST60626 Adjustable Saw Horse DRIVER IMPACT LITHIUM-ION 20V SAW-MAX CIRCULR COMPACT KIT 6A
Holds 1000 lb. per pair (800 lb. extended); 2 way adjustable; smooth slide mechanism for width adjustment; anti-slip rubber on feet and top of safety; innovative ergonomic mechanism for height adjustment; the new height adjustment mechanism enables to adjust the height in open or folded position. Compact, lightweight and powerful. Incredible 1062 in-lbs of torque. More power and double the run time of Ni-Cad. Battery holds its charge up to 18 months in storage. 1/4" hex Quick-Change locking collet. Built-in LED work light. On-board battery power indicator. No load speed: 0-2200 rpm, reversible. Impacts per minute: 0-3800. Charger input: 120 v/60 Hz. Weighs only 2.5 lbs. Electric brake. Includes battery, charger and #2 Phillips Impact Driver Bit. Dremel Saw Max tool kit is powerful enough to cut through virtually any material, yet easily controlled with just one hand. Compact size and ergonomic design makes it easy to handle, easy to follow the cut line, and easy to store. Includes Saw Max tool, Wood/Plastic blade and Metal blade. Specs: left side blade, Worm drive gearing, spindle lock, 7 ft. cord length, 17,000 rpm, 120 volts and weighs 3.85 kg.
Makita 5740NB Corded Circular Saw Dewalt DC825B Cordless Impact Driver Rockwell RK3441K  Circular Saws
Heavy gauge aluminum wraparound base ensures stable support, ruler markings on base for precise cutting, only 84dB for quiet operation. Specs: 5/8" arbor, 7-1/4" blade diameter, max cutting capacity: 90 degrees-2-1/2", 45 degrees-1-5/8", no load RPM-5,200, 11-3/4" long, weighs 8.0lbs. Includes: 7-1/4" 24T Framing Blade - General Contractor and Hex wrench. Compact size and weight allows access into tighter areas and perform a wide range of fastening applications, frameless motor, replaceable brushes, textured anti-slip comfort grip, durable magnesium gear case and all metal transmission, heavy duty impacting mechanism. Specs: 18V, 1/4" hex shank quick release, 111 in/lbs torque, 1,330 in/lbs torque, 0-2,400RPM/0-2,700IPM, 5-3/4" long, weighs 2.2 (tool only)lbs. Includes: tool only (batteries and charger sold separately). 4-1/2" Compact Circular saw. 3,500 rpm, 5 amp motor, 1-11/16" max cutting depth at 90 degrees; 1-1/8" cutting depth at 45 degrees. Weighs only 5 lbs. Left handed blade design for great cut-line visibility. Includes (1) 24 teeth TCT saw blade, rip fence, vacuum adapter and a hex key for changing blades. Ergonomically designed for accurate one handed cutting. Allows the user to hold the material for secure cutting. Durable steel shoe resists scratching when cutting tile and masonry.
Versa Cut RK3440K Compact Mini Corded Circular Saw Trojan TS35 Tall Saw Horse Hitachi C7SB2 Corded Circular Saw
Cuts a variety of materials including tile. Plunge cut depth settings for accurate, precision cutting. Includes (3) 3-3/8" blades: carbide blade for wood; diamond blade for tile; HSS for metal and rip fence and plastic shoe guard to prevent scratches on fine wood. 1-1/16" max depth of cut. Laser cutting guide. 3,500 rpm provides high torque and quick cutting. 10' rubber cord. Weight 3.3 lbs. Strong and tough; simple design for fast, easy set up; make sawhorse whatever length you want by using any 2X lumber; Lifetime Guarantee. Lightweight, easy to maneuver and transport, bevel capacity from 0-55 degrees. Heavy-duty die cast aluminum alloy, one piece base, offers easy to read front and side scales, cutting depth lever, non-slip elastomer grip handle, carbon brush access. Specs: 5/8" arbor, no load speed 6,000RPM, spindle lock, bevel capacity 55 degrees, depth of cut at: 90 degrees-2-7/16", 45 degrees-1-7/8", 7-1/4" blade diameter, weighs 9.5lbs. Includes: 24 tooth carbide tipped blade, blade wrench, carrying case.
Fulton QP4236-12 Stablemate Folding Saw Horse Hitachi WH10DFL2 Cordless Impact Driver Kit Makita 5007F Corded Circular Saw
16-gauge galvanized steel sawhorse with legs that lock into place and rubber feet to protect your floors; legs angle in two directions; spring-loaded locking pins; sold individually; must buy two to make a pair. Powered by Lithium-Ion battery for fade-free power. 955 in/lbs of driving torque for heavy applications like tightening carriage bolts, and sinking deck screws. Drills into wood, metal and concrete. Tightens and loosens small screws, tapping screws, bolts and nuts. Impressively lightweight at only 2.2 lbs and compact at less than 6" in length. Faster impact driving and no-load speed of up to 2,700 rpm and a 3,200 bpm impact rate. Optimized handle for a secure grip and ergonomic comfort in all hand sizes. Free-standing design allows drill to stand on its own when not in use. Balanced tool weight for proper wrist alignment and reduced fatigue. Charger circuitry prevents overheating and power loss. LED light effectively illuminates dark work areas. Quick change 1/4" hex chuck for simple bit replacements. Responsive variable speed trigger for precise control during operation. Kit includes: (2) 12 volt Peak Lithium-Ion batteries, (1) 12 volt Peak 25 minute quick charger, (1) No. 2 driver bit and (1) carrying case. Powerful 15 amp motor delivers 5,800 rpm for proven performance and jobsite durability. Lower guard design improves performance when making bevel and narrow cuts. Large cutting capacity (2-3/8" at 90 degrees, 1/-3/4" at 45 degrees). Two built-in L.E.D. Heavy gauge aluminum wrap-around base for improved durability. Two lights illuminate the line of cut for increased accuracy. Well balanced design for superior handling and performance. AC/DC switch allows for use with alternative power sources. Bevel cuts 0-45 degrees for the most common angles. Large easy to read markings on depth and bevel scales. Flat motor housing design increases stability when changing blades. Conveniently located shaft lock for easy blade replacement. All ball bearing construction for longer life. Ideal for framers, builders, masons and siding contractors.
IMPACT DRIVER 20VLITH W/1-BATT Dewalt DWE575 Lightweight Corded Circular Saw Dewalt DCF815S2 Cordless Impact Driver Kit
Compact and lightweight, yet fast and powerful. LED work light is ideal for dark and enclosed areas. Temperature overload function which shuts unit down automatically if it overheats. Reverse function. No load speed 2500 rpm. 6mm keyless chuck. Worx 20 volt lithium batteries fit a wide range of Worx cordless lawn and workshop tools. Charge time 3-5 hours. Weighs only 2.64 lbs. Anti-snag ball bearing lower guard provides smooth guard operation and long life in harsh environments. Toughcord provides longer durability against cord pull outs. Includes carbide tipped blade, blade wrench and instruction user manual. Specs: 1950 W max watts outage, 5200 rpm no load speed, 57-degree bevel capacity, 22.5 and 45-degree bevel stops, 2-9/16" depth of cut and weighs 8.8 lbs. Compact and lightweight with a slim handle and contoured grip, three LED lights that provide visibility without shadows in work areas, a battery that has been placed at the bottom of the handle that allows the tool to stand up between uses. Specs: 950 inch/pounds of torque, 1/4-inch hex chuck that allows users to push the bit in with one hand to lock it in place and accepts 1-inch bit tips and weighs two pounds. Includes one impact driver, two 12 Volt Max Lithium Ion battery packs, one belt clip, one 40 minute, charger, one bit tip, one belt hook and a contractor bag.
Bosch CS10 Corded Circular Saw Dremel Saw-Max Circular Corded Saw Kit North American Tool 52224 Double Cut Saw
Unmatched durability and flatness, 56 degree level, powerful blower to clear dust in line of cut, High strength and lightweight magnesium upper guard, anti-snag lower guard, adjustable bevel and depth levers, on-tool wrench storage, removable end cap,easy, serviceable brushes, textured soft grip, heavy duty 22 amp switch, spindle lock. Specs: 120V, 5/8" arbor, bevel-56 degrees, bevel stops-22.5/45 degrees, 7-1/4" blade diameter, depth of cut at: 90 degrees-2-7/16", 45 degrees-1-7/8", 50 degrees 1-5/8", no load RPM-5,600, 10ft cord, weighs 10.2lbs. Includes: 24 tooth carbide blade, carrying bag. Makes quick straight cuts, flush cuts and plunge cuts in a wide variety of materials. Includes 2in x4in  cutting guide, 10 dust port adapter, multi-purpose carbide wheel, metal cut-off wheel, tile diamond wheel, multi-purpose flush cut carbide wheel, storage case and owner's manual. Specs: Worm Drive gearing, 7 ft. cord length, 17,000 rpm, 120V - 60Hz and weighs 3.85 lbs. Lubricating system cuts through soft metals like aluminum, copper and stainless steel without overheating or warping. Less splintering and breaking. Tungsten carbide tips. Kerf .131". Arbor: 5/8".
Dewalt DCF885B Cordless Impact Driver DRIVER IMPACT CMPCT 1/4IN 20V 7-1/4 CIRC SAW WITH CASE
7-1/4 CIRC SAW WITH CASE
Our Price: $131.29
Compact design fits into tight areas. Three LED lights with 20 second delay after trigger release, provide visibility without shadows.  One-handed loading hex chuck accepts 1" bit tips. Specs: 0-2,800 rpm no load speed, 0-3,200 ipm, 1,400 in-lbs/117 ft-lbs max torque and weighs 2 lbs. Includes tool only with belt hook. Compact (6.9" length) and lightweight at only 3.3 lbs. Allows the tool to work in tight areas and minimizes user fatigue. Quick release 1/4" hex head chuck for easy 1-handed bit changes. High torque motor delivers 1,450 in-lbs of torque. High performance motor (0-2,800 rpm and 0-3,100 ipm) for quick fastening applications. Battery user gauge displays remaining charge. LED light brightens dark work areas. Includes Impact driver, (2) Li-Ion batteries, (1) charger and (1) storage bag. Powerful 15 amp motor for a high power-to-weight ratio. Large ball bearings and gears for longer tool life. Lower guard design improves performance when making bevel and narrow cuts. Large cutting capacity 2-1/2" at 90 degrees, 1-3/4" at 45 degrees and 1-3/8" at 56 degrees. Large and easy to read marking on depth and bevel scales. Heavy gauge aluminum wrap-around base for more accurate cuts. Large ball bearings and gears for longer tool life. Built-in dust blower clears the line of cut for greater accuracy. Ergonomic rubberized grip provides added comfort. Includes: 7-1/4" Carbide tipped blade, blade wrench and tool case.
Milwaukee M12 Cordless Impact Driver Kit Tilt-Lok 6390-21 Double Insulated Corded Circular Saw Makita 5477NB Hypoid Corded Circular Saw
Milwaukee impact mechanism delivers 1,000 in-lbs of torque. 0-2,500 rpm for increased fastening speed. New ergonomic handle design for increased comfort. On-board battery fuel gauge displays remaining run time. 6-1/2" length. Weighs only 2.3 lbs. Kit contains: (1) M12 1/4" Hex Impact driver, (2) M12 RedLithium batteries, (1)M12 Lithium-Ion battery charger, (1) belt clip and (1) carrying case. Tilt-Lok main handle adjusts to the work or most comfortable work position, cuts tough materials, clear sight line with superior blade visibility from either side, 3.25 maximum horsepower, blade can bevel to 50 degrees, helical steel gears and a 22 amp switch. Specs: 7-1/4" blade diameter, 5/8" arbor, blade side is right, 5/8" spindle, metal/wood cutting- wood, spindle lock, adjustable soft grip handle, blade position is right, depth of cut at: 90 degrees-2-7/16", 45 degrees-1-13/16", 50 degrees 1-11/16", 9 ft. fixed cord, double insulated, 13-3/4" long, weighs 10.4lbs. Includes: circular saw blade, hex blade wrench and a carrying case. Efficient hypoid gears deliver more power and greater surface contact than conventional worm drive gears, oil bath technology and sealed gear housing for less maintenance, ergonomic rubberized grip, 0-51.5 degree bevel capacity with positive stops at 45 and 51.5 degree, ideal for truss and rafter cut-outs, lower guard design, blade wrench is attached to the saw, externally accessible brushes. Specs: 7-1/4" blade diameter, 5/8" arbor, max cutting capacity: 90 degrees-2-3/8", 45 degrees-1-3/4", 50 degrees 1-9/16", no load RPM-4,500, weighs 14.3lbs. Includes: carbide tipped blade, blade wrench.
IMPACT DRIVER BRSHLS 1/4IN 20V Dewalt DCF886B Cordless Impact Driver Kit DRIVER IMPACT MODE 3-SPEED 18V
Brushless motor provides 50 percent more run time. Powerful motor provides 1,400 in-lbs of torque for large fastening applications. Transmission provides 2,700 max rpm's for speed of fastening applications. 1/4" Quick change hex for one handed quick and easy bit changes. Lithium Ion battery. Tool weighs 2.9 lbs. Tool length: 5.8". DeWalt brushless motor delivers more run time. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Tool Only, Battery Not Included. Quick-Shift Mode uses the brushless motor?s electronic controls to find the best balance of speed and torque for each application for more efficient fastening. Tightening Mode (T-mode) downshifts and reduces rotation and impact speed prior to driving the screw into place, and is engineered to minimize screw thread stripping, screw breakage and damage to work. Dual LED lights with an independent on/off switch illuminate the work area. Rubberized soft grip provides increased comfort on the job. 3-speed power selection switch (0-1,100/0-2,100/0-3,600 RPM, 0-1,100/0-2,600/0-3,800 IPM, and 1,550 in.lbs max torque provides precise fastening control for a wide range of applications. Tool only (battery and charger not included).
Dewalt DWE575SB Circular Saws Makita 5007MG Corded Circular Saw DRIVER HYDRAULIC 1/4IN HEX
DRIVER HYDRAULIC 1/4IN HEX
Our Price: $150.00
Lightweight circular saw with electric brake weighs only 8.8 lbs. Electric brake stops the blade after trigger is released. 15 amp motor delivers power for  the toughest applications. 57 degree beveling capacity with stops at 45 degree and 22.5 degrees. Depth of cut capacity of 2-9/16". Ball bearing lower guard provides long life in harsh environments. Durable high grade aluminum smooth base for accurate cuts. Lower guard design improves performance when making bevel cuts and cutting shims. An integrated dust blower allows the user to clear its line of sight while cutting. Tough cord protection system provides durability against cord pull-out. On-board blade wrench storage allows for easy storage and convenience for blade changes. Powerful 15.0 amp motor delivers 5,800 rpm for proven performance and jobsite durability. Magnesium components create a lightweight saw (10.6 lbs) that is well balanced and jobsite tough. Make quick, one-handed adjustments using large, rubberized levers. Better fit and more control with comfortable rubber grip handle. Settings are easy to read with oversized number and ruler markings. Large cutting capacity (2-1/2" at 90 degrees) and bevel capacity (0-56 degrees) with positive stops at 22.5 and 45 degrees. Two built-in L.E.D. lights illuminate the line of cut for increased accuracy. Built-in dust blower clears the line of cut for greater accuracy. Blade wrench is attached to saw for fast and convenient blade changing. Reinforced power cord withstands jobsite abuse and lower repair costs. Includes a premium 7-1/4" carbide tipped framing blade that cuts faster and lasts longer. Brushless motor provides more power, more run-time, and longer life. Electronic Intelligence enables advanced communication between the batteries and tool, allowing for unmatched levels of performance, protection, and productivity. Features SURGE Hydraulic Driver technology and LED light. Weight: 2.3 lbs. Includes: M18 FUEL SURGE 1/4" Hex Hydraulic Driver, Belt Clip and Bit Holder.
Porter-Cable PCCK640LB Cordless Impact Driver Kit Hitachi WH18DGL Cordless Impact Driver Kit Milwaukee M12 Cordless Impact Driver Kit
High torque motor delivers 1,495 in/lbs of torque. High performance transmission (0-2,900 rpm, 0-3,100 bpm) for quick fastening applications. Compact tool (6.2" in length, 3.2 lbs) easily fits in tight spaces and reduces fatigue. Easy load chuck allows user to insert bit with one hand. Battery fuel gauge displays charge remaining in the battery. LED work light provides additional light in dark work areas. 20V Max Lithium Ion batteries with 1.5 amp/hour cells delivers more power and run time in a smaller package. Kit contains: (1) Lithium Ion Impact driver, (2) Lithium Ion compact batteries, (1)Lithium Ion charger, kit box and No. 2 PH Screwdriving bit. Powerful 1,280 in/lbs of turning torque to handle tough jobs in tight spaces. Powered by Lithium-Ion battery for less weight and fade-free power. Up to 2,400 rpm and 3,200 bpm for maximum driving speed and fastening capabilities. Lightweight design at only 3.1 lbs reduce fatigue during extended or elevated use. LED light effectively illuminates dark work spaces. 1/4" quick-change chuck for quick and simple bit replacements. Responsive variable speed trigger provides complete control during operation. Kit includes: (2) 18 volt Lithium-Ion batteries, (1) 18 volt 35 minute charger, (1) 18 volt Impact driver and (1) carrying case. Hex impact driver kit delivers maximum performance in a compact size. Provides extended motor life, more runtime and proprietary drive control. Brushless motor with constant power output, yet runs cooler with no wearable components. Red Lithium 2.0 compact battery pack. M12 Fuel impact driver offers fastening speed. Compact weight and size allow access to tighter areas and reduce user fatigue. The built-in LED light illuminates work surfaces in dark work spots. Includes a 12 volt lithium-ion battery charger. Kit includes (1) M12 Fuel 1/4" hex impact driver (2453-20), (2) M12 Redlithium 2.0 compact battery pack (48-11-2420), (1) M12 Lithium-ion battery charger (48-59-2401), (1) belt clip and (1) carrying case.
DRIVER IMPACT COMPACT 18V     DRIVER IMPACT 1/4IN           Skilsaw SHD77 Worm Drive Corded Circular Saw
DRIVER IMPACT COMPACT 18V
Our Price: $170.40
DRIVER IMPACT 1/4IN
Our Price: $170.56
Makita 4-pole motor with 4 brush design delivers more rpm without decreasing torque. Variable speed (0-2,900 rpm and 0-3,500 ipm) and 1,460 in lbs. of torque for a wide range of fastening applications. All metal gear housing for increased job site durability. Compact and ergonomic design at only 5-3/8" long. Weighs only 2.8 lbs. with battery for reduced operator fatigue. Convenient one-touch 1/4" hex chuck for quick bit changes. Ergonomically designed handle with rubberized soft grip provides increased comfort. Dual L.E.D. lights with afterglow illuminate the work area. Makita's proprietary hammer and anvil impact mechanism is manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power. Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions. 18V compact Lithium-Ion 2.0 Ah battery 1820B, features and integrated L.E.D. battery charge level indicator, provides up to 50 percent more run time per charge, reaches full charge in 25 minutes or less and is compatible with 18V LXT tools. Equipped with Star Protection computer controls to protect against overloading, over-discharging and overheating. Rapid Optimum charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. The charger has a built-in fan to cool the battery for faster more efficient charging. Kit Includes: (2) 18 volt LXT Lithium-Ion compact 2.0 AH batteries, (1) 18 volt Lithium-Ion Rapid Optimum charger and (1) tool case. 20 percent faster in application speed vs. the competition. Tool outputs over 1,300 in. lbs. of torque that allows the user to get more work done by completing a wide range of fastening. Measuring only 5.1" in length allows for unmatched access in tight spaces. The POWERSTATE brushless motor delivers up to 0-3,300 RPM with constant power output to drive screws faster. REDLINK PLUS Intelligence prevents damage to the tool and battery caused by overloading or overheating. For use with M12 RedLithium compact batteries or extended capacity batteries. Specs:  4-mode drive control, 0-1,300 RPM in mode 1, 0-2,400 RPM in mode 2 and 0-3,300 RPM in mode 3. Mode 4 is self-tapping screw mode. Kit includes: (1) M12 FUEL 1/4" Hex Impact Driver, (2) 12 volts M12 RedLithium batteries, (1) M12 Lithium-Ion charger, (1) carrying case and (1) belt clip. Die-cast aluminum motor and gear housings for durability. Push button blade lock for easy blade changes and anti-snag lower guard reduces snags. Two position saw hook for safe rafter placement. Oil indicator level and relief bellows. 8' cord length. UL, CSA Certifications.  STANDARD EQUIPMENT: 7-1/4", 24T Carbide blade, blade wrench, saw hook. SPECIFICATIONS: 120V, 15 amp, 7-1/4" blade diameter, diamond arbor, 4,400 no load RPM. Depth of cut at 45 degrees: 1-15/16", Depth of cut at 90 degrees: 2-3/8".
DRIVER IMPCT BRSHLS SB-CPT 18V Dewalt DCF885C2 Cordless Impact Driver Kit Dewalt DCF886D2 Brushless Cordless Impact Driver Kit
Sub-Compact Brushless Cordless Impact Driver is a fastening solution with superior comfort and handling and is part of a class of compact tools, with the size and weight of lower voltage tools but with the performance, power and compatibility of 18 volt. Efficient brushless motor with two speed settings and dual L.E.D. lights illuminate the work area. Innovative Assist Mode (A-mode) helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins, and is ideal for driving longer fasteners. Ergonomically designed handle with rubberized soft grip provides increased comfort. Specs: 1/4" Hex shank, 0-1,300/0-3,000 RPM, 0-1,600/0-3,900 IPM, 1,240 in. lbs. maximum torque. 5-5/16" length, and 2.6 lbs. weight. The Kit Includes: 18 volt 1/4" Brushless Impact Driver, 18 volt LXT battery, 18 volt charger, and 14" Contractor Tool bag. Compact (5.5" front to back), light weight design fits into tight areas. Three LED lights with 20 second delay after trigger release, provide visibility without shadows. One-handed loading 1/4 hex chuck accepts 1" bit tips. Spec: 1/4in drive size, 2800rpm no load speed, 3200ipm, 1400in-lbs max torque, 117ft-lbs max torque. Includes (2) 20v Max lithium ion 1.5 Ah battery packs, 30 minute fast charger, belt hook and kit box. DeWalt brushless motor delivers more run time. XR Li-Ion batteries with fuel gauge provides more capacity. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back), lightweight (2.9 lbs) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Belt hook included for portability.
DRIVER IMPACT CRDLS/BRSHLS 18V Bosch 25618-02 Cordless Impact Driver Kit DRIVER IMPCT KIT HEX 1/4IN 18V
Variable speed trigger, 1/4" hex drive with Quick Release, high performance motor and all metal gears, hammer and anvil system, increased maneuverability in tight spaces and extended comfort, built-in LED light, spring loaded impact mechanism that reduces user fatigue, externally accessible brushes. Specs: 18V, 1/4" hex drive, impact rate is 0-3,200, no load speed is 0-2,800RPM/3200BPM, 1,500 in/lbs max torque, 5.7" long, weighs 3.3lbs. Includes: (2) 18V, Litheon slimpack batteries, (1) 60-minute Litheon battery charger, (1) double-ended Phillips bit , (1) belt clip, (1) carrying case. Brushless motor optimized for efficiency, longer run-time and longer tool life. Delivers 1,500 in-lbs of torque and 0-2,800 rpm for a wide range of fastening applications. Compact design provides ideal balance and control. Also ideal for overhead applications or work in tight spaces. RedLink intelligence provides advanced overload protection against abusive applications and monitors the temperature to prevent damage and ensure maximum tool and battery life. RedLithium battery pack delivers more work per charge and more work over battery pack life. Weighs only 3.1 lbs. On board fuel gauge on battery. 5-3/8" tool length. Kit includes (1) M18 1/4" Hex brushless impact driver, (2) M18 RedLithium 2.0 compact battery packs, (1) M18 and M12 Multi-voltage charger and (1) carrying case.
SAW CIRC WORM DRIVE 7-1/4 15A Skilsaw SHD77M Magnetic Worm Drive Corded Circular Saw Skilsaw HD5860 Worm Drive Corded Circular Saw
15 amp motor provides power for a variety of cutting applications. Features an enormous rearing ration in a compact size. Lightweight magnesium motor housing and foot plate construction reduces user fatigue for less down time. Built-in saw hook allows convenient saw storage between cuts. Feather board multi-function wrench for blade and brush change, lever adjustments and blade diamond center knockout. Accurate depth of cut system allows for quick accurate adjustment. Left side blade design for clarity of cut line. Anti-snag lower guard provides smooth operation for small cut-off pieces. Soft-grip handles for comfort and control. 53? bevel capacity with positive detent stop at 45?. Large adjustment levers for fast, accurate bevel and depth adjustments. Easy access spindle lock for easy blade changes. Includes: (1) 7-1/4" Magnesium Worm Drive, (1) Multi-function blade wrench, (1) carbide blade and (1) built-in saw hook. Light magnesium housing, impact resistant carbide blade for optimal use, anti snag lower guard, 20 amp switch and heavy gauge cord, die cast aluminum motor and gear housings, push button spindle lock, oil indicator level and relief bellows, aluminum Foot for less user fatigue, two position saw hook, twist lock plug. Specs: 120V, 7 1/4" blade diameter, diamond arbor, UL, CSA certifications, 8 ft. cord, depth of cut at: 90 degrees-2-3/8", 45 degrees-1-15/16", no load 4,400RPM, weighs 14.0lbs. Includes: 24-tooth carbide blade, blade wrench. Die-cast aluminum motor and gear housings. Precision-machined worm drive gears for max. power and durability. Oil indicator level and relief bellows. 22-amp switch and heavy-gauge cord. STANDARD EQUIPMENT: 8-1/4" worm drive skilsaw, blade wrench, 40T combination blade. SPECIFICATIONS: 13 Amp, 120 Volt, 8-1/4" blade diameter, 4,300 No Load RPM, 1-1/2" depth of cut at 60 degrees, 2-1/4" depth of cut at 45 degrees, 2-7/8" depth of cut at 90 degrees. 8' length cord. 18.8 lbs. weight.
Skil MAG77LT Skilsaw Circular Saws Milwaukee M18 Cordless Impact Driver Kit IMPACT DRIVER 1/4IN 20V
IMPACT DRIVER 1/4IN 20V
Our Price: $230.59
Lighter magnesium construction, reduces user fatigue for less down time. Cut-Ready depth of cut system helps with quick, accurate depth measurements. 53 degree bevel allows users to complete a wider variety of cuts. A multi-function wrench has a variety of uses for convenience on the job site. 15 amps of power gives users the power to rip through more lumber in less time. Impact resistant carbide blade can withstand challenging cuts. Saw hook provides safe rafter placement. The anti-snag lower guard provides smooth operation for small cut-off pieces. A durable magnesium foot is designed to endure jobsite abuse. Oil lubricated worm drive gears provide ultimate durability and long saw life in addition to quiet running. Soft grip handle for comfort and control. More accessible spindle lock for quick and easy blade changes. 120 volts. 8' cord. Actual weight is 11.5 lbs without blade, cord and wrench. Milwaukee 4-pole frameless motor. Features a robust design for longer life, more power and more run time. Delivers maximum power and application speed for greater efficiency on the job. RedLink intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. Proprietary 2-mode drive control. Two speed/torque modes. 1/4" hex quick connect chuck. Red Lithium battery delivers more work per charge. Delivers up to 2,750 rpm, 3,450 ipm and 1,500 in-lbs of fastening torque for ideal performance. LED light to illuminate work surfaces and includes an all metal, reversible belt clip for temporary tool storage. 5-1/2" length and weighs only 3.1 lbs. Charge time 30 minutes. Kit includes (1) M18 2-speed 1/4" hex impact driver, (2) M18 Red Lithium compact batteries, (1) M18 & M12 Multi-voltage charger, (1) belt clip and carrying case. Pairing the tool with the Tool Connect app enables you to access the last seen location of the device and diagnostics. Brushless motor delivers up to 75 percent more runtime vs. 18V NiCad brushed motors. Includes a Dewalt Home mode and 3 programmable modes to customize speed and light brightness. Specs: 1/4" Quick Release Hex Shank, 3,250 RPM, 4 speed settings, 1,825 In.-Lbs. max torque, 5.3" length, 2.8 Lbs. weight. Includes: DCF888 Too Connect Impact Driver, (2) Brushless Lithium Ion batteries, charger, and kit box.
Dewalt DCF886M2 Cordless Impact Driver Kit Dewalt DCF885M2 Cordless Impact Driver Kit Hitachi WH18DSDL Brushless Cordless Impact Driver Kit
DeWalt brushless motor delivers more run time. XR Lithium-Ion batteries (2) with fuel gauge provides more capacity. 45 minute charge time. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back), lightweight (3.4 lbs) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Belt hook included for portability. Specs: 0-1,000/2,800/3,250 RPM, 3,600 IPM, 1,825 in-lbs. torque brushless motor. Includes (1) 1/4" Impact Driver, (2) 20V Max batteries, (1) charger, (1) belt hook, and (1) kit box. XR Li-Ion batteries with fuel gauge provides more capacity. 3-LED lights with 20 second delay after trigger release, provide visibility without shadows. Compact (5.55" front to back), lightweight (3.4 lbs) design to fit into tight spaces. One handed loading 1/4" hex chuck accepts 1" bit tips. Belt hook included for portability. Lithium Ion slide-type battery technology for fade free power, less weight and longer battery life. Industrial grade 2-piece motor with up to 1,510 in-lbs of torque to handle the toughest jobs. 1/4 inch Hex quick-change chuck for quick and easy bit replacement. Two-step power switch to alternate between full power and power saving modes. Metal belt hook keeps the tool close at hand. Bright LED light for increases visibility in enclosed work spaces. Externally accessible carbon brush for quick and easy maintenance. Lightweight at only 3.7 lbs. Cross compatible with all other Hitachi slide type 18 volt battery systems. Includes: (2) Lithium Ion 3.0 Ah slide type batteries (330067), (1) rapid Lithium Ion slide battery charger (UC18YRSL) and (1) carrying case (323230).
SAW METAL CUTTING 8IN W/DIABLO Milwaukee 2653-22 Cordless Impact Driver Kit Milwaukee 6370-21 Grounded Corded Circular Saw Kit
Worm drive gearing optimized for metal. Blade window gives you the ability to make true and accurate cuts. Comes with a large chip tray so you can stay productive. The Diablo Cermet blade cuts quickly and virtually spark-free, with minimal burrs; showing metal no mercy. Weighs 15.4 lbs. Features a Powerstate Brushless motor. Redlink Plus allows operator to choose between 3 fastening modes: Mode #1 for precision work (0-850 RPM, 200 in-lbs of torque), Mode #2 helps prevent damage to fasteners and material (0-2,100 RPM, 700 in-lbs of torque) and Mode #3 delivers maximum performance for the toughest application (0-2,900 RPM, 1600 in-lbs of torque). Specs: 1600 in-lbs peak torque, 0-2,900 max rmp, 0-3,600 max ipm, M18 and M12 multi-voltage charger, fuel gauge on battery, LED light and weighs 3.6 lbs with battery. Includes two M18 Redlithium XC high capacity battery packs, one-hour multi-voltage charger, belt clip and carrying case. Faster, cleaner, more affordable metal cutting, durable blade shield with integral chip tank deflects/collects hot chips and sparks, plunge lever for fast, effective plunge cut, exclusive quick release shield latch for fast waste disposal and blade changes, premium cermet tipped blades cut faster, cleaner, and longer than other carbide tipped or friction blades. Specs: Voltage  120 AC; 8" blade, no load speed- 3,700 RPM, spindle-5/8",15 ft. fixed cord, grounded, metal/wood cutting-metal, spindle lock, soft grip handle, blade position-right, depth of cut at: 90 degrees 2-9/16", 6-1/2" long, weighs 13.3 lbs. Includes: hex blade wrench, circular saw blade, carrying case.
10-1/4IN WD CIRC SAW          SAW BEAM WORM DRIVE 16-5/16IN Makita 5402NA Corded Circular Saw
10-1/4IN WD CIRC SAW
Our Price: $403.79
Larger for cutting 4x cleanly and efficiently in 1 pass. 15 amp dual-field motor designed for more power and durability. Magnesium construction. Keyed blade change. Includes 10-1/4" Diablo blade so you're ready to make perfect cuts right out of the box. Includes blade wrench stored on tool. Super Sawsquatch Circular Saw tears through whatever you throw at it. 2,500 RPM, 15 Amp dual-field motor keeps the motor cooler to provide increased power. 6-1/4" cutting capacity to power through 6x materials in one easy cut. The magnesium, die-cast foot plate guarantees true, square cuts every time. Lightweight, durable magnesium construction, brass worm drive gearing with electronic brake. Includes: (1) Super Sawsquatch saw, (1) 16-5/16" blade, (1) saw stand, (1) multifunction-wrench. Electric brake for maximum productivity, low noise level at only 87dB for quiet operation, blade stabilizer for stable blade rotation and cutting performance, depth control lever for convenience and secure adjustments, large support handle for increased operator comfort and control, carbide tipped blade. Specs: 15.0 AMP, 16-5/16" blade diameter, 1" arbor, max cutting capacity: 90 degrees- 6-1/4", 45 degrees-4-3/16", no load 2,200RPM, 1,800 watts out, 24-1/4" long, weighs 32.1bs. Includes: (1) 32 tooth carbide tipped blade, #6 hex wrench, rip fence.
   
 
1